Commit Graph

87698 Commits

Author SHA1 Message Date
Pedro Alves 49940788ab Always switch fork child to the main UI
The following scenario:

 - gdb started in normal CLI mode.

 - separate MI channel created with new-ui

 - inferior output redirected with the "set inferior-tty" command.

 - use -exec-run in the MI channel to run the inferior

is presently mishandled.

When we create the inferior, in fork-child.c, right after vfork, we'll
close all the file descriptors in the vfork child, and then dup the
tty to file descriptors 0/1/2, create a session, etc.  Note that when
we close all descriptors, we close the file descriptors behind
gdb_stdin/gdb_stdout/gdb_stderr of all secondary UIs...  So if
anything goes wrong in the child and it calls warning/error, it'll end
up writting to the current UI's stdout/stderr streams, which are
backed by file descriptors that have since been closed.  Because this
happens in a vfork region, the corresponding stdin/stdout/stderr in
the parent/gdb end up corrupted.

The fix is to switch to the main UI right after the vfork, so that
gdb_stdin/gdb_stdout/gdb_stderr are correctly mapped to
stdin/stdout/stderr (and thus to file descriptors 0/1/2), so this code
works as it has always worked.

(Technically, we're doing a lot of stuff we shouldn't be doing after a
vfork, while we should only be calling async-signal-safe functions.)

gdb/ChangeLog:
2016-06-21  Pedro Alves  <palves@redhat.com>

	* fork-child.c (fork_inferior): Switch the child to the main UI
	right after vfork.  Save/restore the current UI in the parent.
	Flush outputs of the main UI instead of the current UI.

gdb/testsuite/ChangeLog:
2016-06-21  Pedro Alves  <palves@redhat.com>

	* gdb.mi/mi-exec-run.exp: New file.
2016-06-21 01:11:57 +01:00
Pedro Alves ef274d26b5 Make mi-break.exp always expect breakpoint commands output on the main UI
mi-break.exp regresses when tested with MI running on a secondary UI,
with RUNTESTFLAGS="FORCE_SEPARATE_MI_TTY=1".

The problem is simply that the test sets a breakpoint, and attaches
"print" commands to the breakpoint.  Since breakpoint commands always
run with the main UI as current UI, the breakpoint command's output
goes to the main UI.  So we need to tweak the test to expect it there.

gdb/testsuite/ChangeLog:
2016-06-21  Pedro Alves  <palves@redhat.com>

	* gdb.mi/mi-break.exp (test_breakpoint_commands): Always expect
	breakpoint command's output on the main UI.
	(test_break): New procedure, factored out from calls in the top
	level.
	(top level): Use foreach_with_prefix to test MI as main UI and as
	separate UI.
2016-06-21 01:11:56 +01:00
Pedro Alves 468afe6c5f Send deleted watchpoint-scope output to all UIs
Testing with:

  make check RUNTESTFLAGS="SEPARATE_MI_TTY=1"

shows this, in gdb.mi/mi-watch.exp:

 -*stopped,reason="watchpoint-scope",wpnum="2",frame={addr="0x00000000004005cb",
 +*stopped,frame={addr="0x00000000004005cb",
 (...)
 -PASS: gdb.mi/mi-watch.exp: hw: watchpoint trigger
 +FAIL: gdb.mi/mi-watch.exp: hw: watchpoint trigger (unknown output after running)

That is, we lose the "watchpoint-scope" output on the MI UI.

This commit fixes it, and makes the test run with MI running as both
main UI and separate UI.

gdb/ChangeLog:
2016-06-21  Pedro Alves  <palves@redhat.com>

	* breakpoint.c (watchpoint_check): Send watchpoint-deleted output
	to all UIs.

gdb/testsuite/ChangeLog:
2016-06-21  Pedro Alves  <palves@redhat.com>

	* gdb.mi/mi-watch.exp (test_watchpoint_creation_and_listing)
	(test_awatch_creation_and_listing)
	(test_rwatch_creation_and_listing, test_watchpoint_triggering):
	Remove 'type' parameter.
	(test_watchpoint_all): New parameter mi_mode.  Remove
	with_test_prefix.
	(top level): Use foreach_with_prefix, and add main/separate UI MI
	testing axis.
2016-06-21 01:11:56 +01:00
Pedro Alves 51f77c3704 Add testing infrastruture bits for running with MI on a separate UI
With this, a specific test may can start GDB with MI on a separate UI
by using:

  mi_gdb_start separate-mi-tty

In addition, it's also possible to run the whole testsuite with MI on
a separate tty, with:

 make check RUNTESTFLAGS="FORCE_SEPARATE_MI_TTY=1"

gdb_main_spawn_id and mi_spawn_id are added so that tests may expect
output from either channel.

While at it, inferior_spawn_id was not being cleared when gdb exits,
unlike the other spawn ids, thus a test that starts gdb more than once
would end up using a stale spawn id.

gdb/testsuite/ChangeLog:
2016-06-21  Pedro Alves  <palves@redhat.com>

	* README (Testsuite Parameters): Document FORCE_SEPARATE_MI_TTY.
	* lib/gdb.exp (default_gdb_exit): Clear inferior_spawn_id.
	* lib/mi-support.exp (mi_uncatched_gdb_exit): Unset
	gdb_main_spawn_id, mi_spawn_id, unset inferior_spawn_id.
	(gdb_main_spawn_id, mi_spawn_id): Declare and
	comment.
	(mi_create_inferior_pty): New procedure,
	factored out from default_mi_gdb_start.
	(switch_gdb_spawn_id, mi_gdb_start_separate_mi_tty): New
	procedures.
	(default_mi_gdb_start): Call mi_gdb_start_separate_mi_tty if the
	separate-mi-tty option is specified, or SEPARATE_MI_TTY is set.
	Use mi_create_inferior_pty.
	(mi_gdb_start): Use eval to pass down args list.
2016-06-21 01:11:55 +01:00
Pedro Alves 86f78169c8 [DOC] Document support for running interpreters on separate UIs
gdb/ChangeLog:
2016-06-21  Pedro Alves  <palves@redhat.com>

	* NEWS: Mention support for running interpreters on separate
	UIs and the new new-ui command.

gdb/doc/ChangeLog:
2016-06-21  Pedro Alves  <palves@redhat.com>

	* gdb.texinfo (Interpreters): Update intepreter-exec section,
	document new-ui and explain use case.
2016-06-21 01:11:55 +01:00
Pedro Alves 60eb5395fa Add new command to create extra console/mi UIs
With all the previous plumbing in place, it's now easy to add a
command that actually creates a new console/mi UI.

The intended use case is to make it possible and easy for MI frontends
to provide a fully featured GDB console to users, with readline
support, command line editing, history, etc., just like if gdb was
started on the command line.  Currently MI frontends have to try to
implement all of that theirselves and make use of "-interpreter-exec
console ...", which is far from perfect.  If you ever tried Eclipse's
gdb console window, you'll know what I mean...

Instead of trying to multiplex console through MI, this command let's
just leverage all the built in readline/editing support already inside
gdb.

The plan is for the MI frontend to start GDB in regular console mode,
running inside a terminal emulator widget embedded in Eclipse (which
already exists, for supporting the shell widget; other frontends have
similar widgets), and then tell GDB to run a full MI interpreter on an
specified input/output device, independent of the console.

My original prototype planned to do things the other way around --
start GDB in MI mode, and then start an extra CLI console on separate
tty.  I handed over that prototype to Marc Khouzam @ Eclipse CDT, and
after experimentation and discussion, we ended up concluding that
starting GDB in CLI mode instead was both easier and actually also
supported an interesting use case -- connect an Eclipse frontend to a
GDB that is already running outside Eclipse.

The current usage is "new-ui <interpreter> <tty>".

E.g., on a terminal run this scriplet:

 $ cat gdb-client
 #!/bin/bash

 reset
 tty
 tail -f /dev/null

 $ gdb-client
 /dev/pts/15

Now run gdb on another terminal, and tell it to start a MI interpreter
on the tty of the other terminal:

 ...
 (gdb) new-ui mi /dev/pts/15
 New UI allocated

Now back to the the gdb-client terminal, we'll get an MI prompt, ready
for MI input:

 /dev/pts/15
 =thread-group-added,id="i1"
 (gdb)

You can also start a new UI running a CLI, with:

 (gdb) new-ui console /dev/pts/15

Though note that this console won't support readline command editing.
It works as if "set editing off" was entered.

gdb/ChangeLog:
2016-06-21  Pedro Alves  <palves@redhat.com>

	* interps.c (set_top_level_interpreter): New function, factored
	out from captured_main.
	(interpreter_completer): Make extern.
	* interps.h (set_top_level_interpreter, interpreter_completer):
	New declarations.
	(captured_main): Use set_top_level_interpreter.
	* top.c [!O_NOCTTY] (O_NOCTTY): Define as 0.
	(open_terminal_stream, new_ui_command): New functions.
	(init_main): Install the "new-ui" command.
2016-06-21 01:11:55 +01:00
Pedro Alves 268a799a45 Make stdin be per UI
This commit makes each UI have its own "stdin" stream pointer.  This
is used to determine whether the "from_tty" argument to
execute_command, etc. should be true.

Related, this commit makes input_from_terminal_p take an UI parameter,
and then avoids the gdb_has_a_terminal in it.  gdb_has_a_terminal only
returns info on gdb's own main/primary terminal (the real stdin).
However, the places that call input_from_terminal_p really want to
know is whether the command came from an interactive tty.  This patch
thus renames input_from_terminal_p to input_interactive_p for clarity,
and then makes input_interactive_p check for "set interactive" itself,
along with ISATTY, instead of calling gdb_has_a_terminal.  Actually,
quit_force wants to call input_interactive_p _after_ stdin is closed,
we can't call ISATTY that late.  So instead we save the result of
ISATTY in a field of the UI.

gdb/ChangeLog:
2016-06-21  Pedro Alves  <palves@redhat.com>

	* cli/cli-script.c (read_next_line): Adjust to per-UI stdin.
	(read_command_lines): Use input_interactive_p instead of
	input_from_terminal_p.
	* defs.h (struct ui): Forward declare.
	(input_from_terminal_p): Rename to ...
	(input_interactive_p): ... this.
	* event-top.c (stdin_event_handler): Pass 0 as from_tty argument
	to quit_command.
	(command_handler): Adjust to per-UI stdin.
	(handle_line_of_input): Adjust to per-UI stdin and use
	input_interactive_p instead of ISATTY and input_from_terminal_p.
	(gdb_readline_no_editing_callback): Adjust to per-UI stdin.
	(command_line_handler): Always pass true as "from_tty" parameter
	of handle_line_of_input and execute_command.
	(async_sigterm_handler): Pass 0 as from_tty argument to
	quit_command.
	* inflow.c (interactive_mode, show_interactive_mode): Moved to ...
	(gdb_has_a_terminal): Don't check interactive_mode here.
	(_initialize_inflow): Don't install "set interactive-mode" here.
	* main.c (captured_command_loop): Adjust to per-UI stdin.
	* mi/mi-interp.c (mi_execute_command_wrapper): Adjust to per-UI
	stdin.
	* top.c (new_ui): Save the stdin stream and whether it's a tty.
	(dont_repeat): Adjust to per-UI stdin.
	(command_line_input): Adjust to per-UI stdin and to use
	input_interactive_p.
	(quit_force): Write history if any UI supports interactive input.
	(interactive_mode, show_interactive_mode): Move here, from
	inflow.c.
	(input_from_terminal_p): Rename to ...
	(input_interactive_p): ... this, and check the "interactive_mode"
	global instead of calling gdb_has_a_terminal.
	(_initialize_top): Install "set interactive-mode" here.
	* top.h (struct ui) <stdin_stream, input_interactive_p>: New
	fields.
	* utils.c (quit): Pass 0 as from_tty argument to quit_force.
	(defaulted_query): Adjust to per-UI stdin and to use
	input_interactive_p.
2016-06-21 01:11:54 +01:00
Pedro Alves 07169ff772 Handle UI's terminal closing
Without this, GDB exits if a secondary UIs terminal/input stream is
closed:

 $ ./gdb -ex "new-ui mi /dev/pts/6"
 New UI allocated
	 <<< close /dev/pts/6
 (gdb) Error detected on fd 9
 $

We want that for the main UI, but not secondary UIs.

gdb/ChangeLog:
2016-06-21  Pedro Alves  <palves@redhat.com>

	* event-top.c (stdin_event_handler): Don't quit gdb if it was a
	secondary UI's input stream that closed.  Instead, just delete the
	UI.
2016-06-21 01:11:54 +01:00
Pedro Alves 98d9f24ed1 Make main_ui be heap allocated
This is preparation for being able to create more than one UI object.

The change to gdb_main to stop using catch_errors is necessary because
catch_errors references current_uiout, which expands to
current_ui->m_current_ui, which would crash because current_ui is not
initialized yet at that point.  It didn't trigger earlier in the
series because before this patch, main_ui/current_ui always start out
non-NULL.

gdb/ChangeLog:
2016-06-21  Pedro Alves  <palves@redhat.com>

	* event-top.c (main_ui_): Delete.
	(main_ui, current_ui, ui_list): No longer initialize here.
	* main.c (captured_main): UI initialization code factored out to
	new new_ui function.
	(gdb_main): Wrap captured_main with TRY/CATCH instead of
	catch_errors.
	* top.c (highest_ui_num): New global.
	(new_ui): New function.
	* top.h (struct ui) <num>: New field.
	(new_ui): New declaration.
2016-06-21 01:11:53 +01:00
Pedro Alves eaae60fd94 Only send sync execution command output to the UI that ran the command
Currently when a "step", "next", etc. finishes, the current source
line is printed on all console UIs.

This patch makes the CLI and TUI interpreters reuse MI's logic to only
emit console output related to a synchronous command on the
console-like interpreter that started the command in the first place.

gdb/ChangeLog:
2016-06-21  Pedro Alves  <palves@redhat.com>

	* cli/cli-interp.c (cli_on_normal_stop): Bail out early if there's
	nothing to print.  Use should_print_stop_to_console.
	* tui/tui-interp.c (tui_on_normal_stop): Likewise.
2016-06-21 01:11:53 +01:00
Pedro Alves 8980e177bb Push thread->control.command_interp to the struct thread_fsm
I noticed that if we step into an inline function, step_1 never
reaches proceed, and thus nevers sets the thread's
tp->control.command_interp.  Because of that,
should_print_stop_to_console fails to determine that is should print
stop output to the console.

The fix is to set the thread's command_interp earlier.  However, I
realized that we can move that field to the thread_fsm, given that its
lifetime is exactly the same as thread_fsm.  So the patch plumbs all
fsms constructors to take the command interp and store it in the
thread_fsm.

We can see the fix in action, with e.g., the gdb.opt/inline-cmds.exp
test, and issuing a step when stopped at line 67:

 &"s\n"
 ^running
 *running,thread-id="all"
 (gdb)
 ~"67\t  result = func2 ();\n"
 *stopped,reason="end-stepping-range",frame={addr="0x00000000004004d0",func="main",args=[],file="/home/pedro/gdb/mygit/src/gdb/testsuite/gdb.opt/inline-cmds.c",fullname="/home/pedro/gdb/mygit/src/gdb/testsuite/gdb.opt/inline-cmds.c",line="67"},thread-id="1",stopped-threads="all",core="0"
 (gdb)
 s
 &"s\n"
 ^running
 *running,thread-id="all"
 (gdb)
+ ~"func2 () at /home/pedro/gdb/mygit/src/gdb/testsuite/gdb.opt/inline-cmds.c:67\n"
+ ~"67\t  result = func2 ();\n"
 *stopped,reason="end-stepping-range",frame={addr="0x00000000004004d0",func="func2",args=[],file="/home/pedro/gdb/mygit/src/gdb/testsuite/gdb.opt/inline-cmds.c",fullname="/home/pedro/gdb/mygit/src/gdb/testsuite/gdb.opt/inline-cmds.c",line="67"},thread-id="1",stopped-threads="all",core="0"
 (gdb)

(The inline-cmds.exp command is adjusted to exercise this.)

(Due to the follow_fork change, this also fixes "next N" across a fork
with "set follow-fork child" with "set detach-on-fork on".  Commands
that rely on internal breakpoints, like "finish" will still require
more work to migrate breakpoints etc. to the child thread.)

gdb/ChangeLog:
2016-06-21  Pedro Alves  <palves@redhat.com>

	* breakpoint.c (new_until_break_fsm): Add 'cmd_interp' parameter.
	(until_break_fsm_should_stop, until_break_fsm_clean_up): Add
	thread parameter.
	(until_break_command): Pass command interpreter to thread fsm
	ctor.
	* cli/cli-interp.c (should_print_stop_to_console): Adjust.
	* gdbthread.h (struct thread_control_state) <command_interp>:
	Delete field.
	* infcall.c (new_call_thread_fsm): Add 'cmd_interp' parameter.
	Pass it down.
	(call_thread_fsm_should_stop): Add thread parameter.
	(call_function_by_hand_dummy): Pass command interpreter to thread
	fsm ctor.  Pass thread pointer to fsm clean up method.
	* infcmd.c: Include interps.h.
	(struct step_command_fsm) <thread>: Delete field.
	(new_step_command_fsm): Add 'cmd_interp' parameter.  Pass it down.
	(step_command_fsm_prepare): Remove references to fsm's thread
	field.
	(step_1): Pass command interpreter to thread
	fsm ctor.  Pass thread pointer to fsm clean up method.
	(step_command_fsm_should_stop, step_command_fsm_clean_up): Add
	thread parameter and use it.
	(new_until_next_fsm): Add 'cmd_interp' parameter.  Pass it down.
	(until_next_fsm_should_stop, until_next_fsm_clean_up): Add thread
	parameter and use it.
	(until_next_command): Pass command interpreter to thread fsm ctor.
	(struct finish_command_fsm) <thread>: Delete field.
	(finish_command_fsm_ops): Add NULL slot for should_notify_stop.
	(new_finish_command_fsm): Add 'cmd_interp' parameter and pass it
	down.  Remove thread parameter and adjust.
	(finish_command_fsm_should_stop, finish_command_fsm_clean_up): Add
	thread parameter and use it.
	(finish_command): Pass command interpreter to thread fsm ctor.
	Don't pass thread.
	* infrun.c (follow_fork): Move thread fsm to child fork instead of
	command interpreter, only.
	(clear_proceed_status_thread): Remove reference to command_interp.
	(proceed): Don't record the thread's command interpreter.
	(clean_up_just_stopped_threads_fsms): Pass thread to fsm clean_up
	method.
	(fetch_inferior_event): Pass thread to fsm should_stop method.
	* thread-fsm.c (thread_fsm_ctor): Add 'cmd_interp' parameter.
	Store it.
	(thread_fsm_clean_up, thread_fsm_should_stop): Add thread
	parameter and pass it down.
	* thread-fsm.h (struct thread_fsm) <command_interp>: New field.
	(struct thread_fsm_ops) <clean_up, should_stop>: Add thread
	parameter.
	(thread_fsm_ctor): Add 'cmd_interp' parameter.
	(thread_fsm_clean_up, thread_fsm_should_stop): Add thread
	parameter.
	* thread.c (thread_cancel_execution_command): Pass thread to
	thread fsm clean_up method.

gdb/testsuite/ChangeLog:
2016-06-21  Pedro Alves  <palves@redhat.com>

	* gdb.opt/inline-cmds.c: Add "set mi break here" marker.
	* gdb.opt/inline-cmds.exp: Add MI tests.
2016-06-21 01:11:53 +01:00
Pedro Alves 26cde2cc30 New function should_print_stop_to_console
There's code in the MI interpreter that decides whether a stop should
be sent to MI's console stream.  Move this check to the CLI
interpreter code, so that we can reuse it in both the CLI and TUI
interpreters.

gdb/ChangeLog:
2016-06-21  Pedro Alves  <palves@redhat.com>

	* cli/cli-interp.c: Include gdbthread.h and thread-fsm.h.
	(should_print_stop_to_console): New function, factored out from
	mi_on_normal_stop_1.
	* cli/cli-interp.h (should_print_stop_to_console): Declare.
	* mi/mi-interp.c (mi_on_normal_stop_1): Use
	should_print_stop_to_console.  Pass it the current UI's console
	interpreter.
	* mi/mi-main.c (captured_mi_execute_command): Use the
	INTERP_CONSOLE symbol rather than explicit "console".
2016-06-21 01:11:52 +01:00
Pedro Alves a8836c9358 Fix for spurious prompts in secondary UIs
Running mi-break.exp with MI on a secondary UI reveals that MI emits
spurious prompts compared MI running as primary UI:

   -exec-continue
   ^running
   *running,thread-id="all"
   (gdb)
   =breakpoint-modified,bkpt={number="9",type="breakpoint",disp="keep",enabled="y",func="callee2",line="39",script={"set $i=0","while $i<10","print $i","set $i=$i+1","end","continue"}}
   ~"\n"
   ~"Breakpoint 9, callee2 (intarg=2, strarg=0x400730 \"A string argument.\") at ...src/gdb/testsuite/gdb.mi/basics.c:39\n"
   ~"39\t  callee3 (strarg);\n"
   *stopped,reason="breakpoint-hit",disp="keep",bkptno="9",frame={addr="0x00000000004005dd",func="callee2",...
   *running,thread-id="all"
>> (gdb)
   =breakpoint-modified,bkpt={number="9",...
   ~"\n"
   ~"Breakpoint 9, callee2 (intarg=2, strarg=0x400730 \"A string argument.\") at ...src/gdb/testsuite/gdb.mi/basics.c:39\n"
   ~"39\t  callee3 (strarg);\n"
   *stopped,reason="breakpoint-hit",disp="keep",bkptno="9",...
   *running,thread-id="all"
   ~"[Inferior 1 (process 12639) exited normally]\n"
   =thread-exited,id="1",group-id="i1"
   =thread-group-exited,id="i1",exit-code="0"
   *stopped,reason="exited-normally"
   FAIL: gdb.mi/mi-break.exp: intermediate stop and continue
   FAIL: gdb.mi/mi-break.exp: test hitting breakpoint with commands (timeout)

Note the line marked >> above.

The test sets a breakpoint that runs "continue", a foreground command.
When we get to run the "continue", we've already emitted the *stopped
event on the MI UI, and set its prompt state to PROMPT_NEEDED (this is
done from within normal_stop).  Since inferior events are always
handled with the main UI as current UI, breakpoint commands always run
with the main UI as current UI too.  This means that the "continue"
ends up always disabling the prompt on the main UI, instead of the UI
that had just been done with synchronous execution.

I think we'll want to extend this with a concept of "set of
threads/inferiors a UI/interpreter is blocked waiting on", but I'm
leaving that for a separate series.

gdb/ChangeLog:
2016-06-21  Pedro Alves  <palves@redhat.com>

	* infcmd.c (prepare_execution_command): Use
	all_uis_on_sync_execution_starting.
	* infrun.c (all_uis_on_sync_execution_starting): New function.
	* infrun.h (all_uis_on_sync_execution_starting): Declare.
2016-06-21 01:11:52 +01:00
Pedro Alves 3b12939dfc Replace the sync_execution global with a new enum prompt_state tristate
When sync_execution (a boolean) is true, it means we're running a
foreground command -- we hide the prompt stop listening to input, give
the inferior the terminal, then go to the event loop waiting for the
target to stop.

With multiple independent UIs, we need to track whether each UI is
synchronously blocked waiting for the target.  IOW, if you do
"continue" in one console, that console stops accepting commands, but
you should still be free to type other commands in the others
consoles.

Just simply making sync_execution be per-UI alone not sufficient,
because of this in fetch_inferior_event:

  /* If the inferior was in sync execution mode, and now isn't,
     restore the prompt (a synchronous execution command has finished,
     and we're ready for input).  */
  if (current_ui->async && was_sync && !sync_execution)
    observer_notify_sync_execution_done ();

We'd have to record at entry the "was_sync" state for each UI, not
just of the current UI.

This patch instead replaces the sync_execution flag by a per-UI
tristate flag indicating the command line prompt state:

 enum prompt_state
 {
   /* The command line is blocked simulating synchronous execution.
      This is used to implement the foreground execution commands
      ('run', 'continue', etc.).  We won't display the prompt and
      accept further commands until the execution is actually over.  */
   PROMPT_BLOCKED,

   /* The command finished; display the prompt before returning back to
      the top level.  */
   PROMPT_NEEDED,

   /* We've displayed the prompt already, ready for input.  */
   PROMPTED,
 ;

I think the end result is _much_ clearer than the current code, and,
it addresses the original motivation too.

gdb/ChangeLog:
2016-06-21  Pedro Alves  <palves@redhat.com>

	* annotate.c: Include top.h.
	(async_background_execution_p): Delete.
	(print_value_flags): Check the UI's prompt state rather then
	async_background_execution_p.
	* event-loop.c (start_event_loop): Set the prompt state to
	PROMPT_NEEDED.
	* event-top.c (display_gdb_prompt, async_enable_stdin)
	(async_disable_stdin): Check the current UI's prompt state instead
	of the sync_execution global.
	(command_line_handler): Set the prompt state to PROMPT_NEEDED
	before running a command, and display the prompt if still needed
	afterwards.
	* infcall.c (struct call_thread_fsm) <waiting_ui>: New field.
	(new_call_thread_fsm): New parameter 'waiting_ui'.  Store it.
	(call_thread_fsm_should_stop): Set the prompt state to
	PROMPT_NEEDED.
	(run_inferior_call): Adjust to temporarily set the prompt state to
	PROMPT_BLOCKED instead of using the sync_execution global.
	(call_function_by_hand_dummy): Pass the current UI to
	new_call_thread_fsm.
	* infcmd.c: Include top.h.
	(continue_1): Check the current UI's prompt state instead of the
	sync_execution global.
	(continue_command): Validate global execution state before calling
	prepare_execution_command.
	(step_1): Call all_uis_check_sync_execution_done.
	(attach_post_wait): Don't call async_enable_stdin here.  Remove
	reference to sync_execution.
	* infrun.c (sync_execution): Delete global.
	(follow_fork_inferior)
	(reinstall_readline_callback_handler_cleanup): Check the current
	UI's prompt state instead of the sync_execution global.
	(check_curr_ui_sync_execution_done)
	(all_uis_check_sync_execution_done): New functions.
	(fetch_inferior_event): Call all_uis_check_sync_execution_done
	instead of trying to determine whether the global sync execution
	changed.
	(handle_no_resumed): Check the prompt state of all UIs.
	(normal_stop): Emit the no unwait-for even to all PROMPT_BLOCKED
	UIs.  Emit the "Switching to" notification to all UIs.  Enable
	stdin in all UIs.
	* infrun.h (sync_execution): Delete.
	(all_uis_check_sync_execution_done): Declare.
	* main.c (captured_command_loop): Don't call
	interp_pre_command_loop if the prompt is blocked.
	(catch_command_errors, catch_command_errors_const): Adjust.
	(captured_main): Set the initial prompt state to PROMPT_NEEDED.
	* mi/mi-interp.c (display_mi_prompt): Set the prompt state to
	PROMPTED.
	(mi_interpreter_resume): Don't clear sync_execution.  Remove hack
	comment.
	(mi_execute_command_input_handler): Set the prompt state to
	PROMPT_NEEDED before executing the command, and only display the
	prompt if the prompt state is PROMPT_NEEDED afterwards.
	(mi_on_resume_1): Adjust to check the prompt state.
	* target.c (target_terminal_inferior): Adjust to check the prompt
	state.
	* top.c (wait_sync_command_done, maybe_wait_sync_command_done)
	(execute_command): Check the current UI's prompt state instead of
	sync_execution.
	* top.h (enum prompt_state): New.
	(struct ui) <prompt_state>: New field.
	(ALL_UIS): New macro.
2016-06-21 01:11:51 +01:00
Pedro Alves dbf30ca3f5 Make gdb_in_secondary_prompt_p() be per UI
gdb/ChangeLog:
2016-06-21  Pedro Alves  <palves@redhat.com>

	* top.c (gdb_secondary_prompt_depth): Delete.
	(gdb_in_secondary_prompt_p): Add ui parameter.  Use it.
	(gdb_readline_wrapper_cleanup, gdb_readline_wrapper): Adjust to
	per-UI gdb_secondary_prompt_depth.
	* top.h (struct ui) <secondary_prompt_depth>: New field.
2016-06-21 01:11:51 +01:00
Pedro Alves b2d86570b3 Simplify starting the command event loop
All interpreter types (CLI/TUI/MI) print the prompt, and then call
start_event_loop.

Because we'll need an interpreter hook to display the
interpreter-specific prompt before going back to the event loop,
without actually starting an event loop, this patch moves the
start_event_loop call to common code, and replaces the command_loop
hook with a pre_command_look hook, that now just prints the prompt.

Turns out to be a cleanup on its own right anyway.

gdb/ChangeLog:
2016-06-21  Pedro Alves  <palves@redhat.com>

	* cli/cli-interp.c (cli_interpreter_pre_command_loop): New
	function.
	(cli_interp_procs): Install it instead of cli_command_loop.
	* cli/cli-interp.h (cli_interpreter_pre_command_loop): Declare.
	* event-top.c (cli_command_loop): Delete.
	* interps.c (interp_new): Remove reference to command_loop_proc.
	(current_interp_command_loop): Delete.
	(interp_pre_command_loop): New function.
	(interp_command_loop_ftype): Delete.
	* interps.h (interp_pre_command_loop_ftype): New typedef.
	(struct interp_procs) <command_loop_proc>: Delele field.
	<pre_command_loop_proc>: New field.
	(current_interp_command_loop): Delete declaration.
	(interp_pre_command_loop): New declaration.
	* main.c (captured_command_loop): Call interp_pre_command_loop
	instead of current_interp_command_loop and start an event loop.
	* mi/mi-interp.c (mi_command_loop): Delete.
	(mi_interpreter_pre_command_loop): New.
	(mi_interp_procs): Update.
	* tui/tui-interp.c (tui_interp_procs): Install
	cli_interpreter_pre_command_loop instead of cli_command_loop.
2016-06-21 01:11:51 +01:00
Pedro Alves 9204d6922c Make raw_stdout be per MI instance
Each MI instance should obviously have its own raw output channel,
along with save_raw_stdout.

gdb/ChangeLog:
2016-06-21  Pedro Alves  <palves@redhat.com>

	* interps.c (current_interpreter): New function.
	* interps.h (current_interpreter): New declaration.
	* mi/mi-cmds.h (raw_stdout): Delete declaration.
	* mi/mi-common.h (struct mi_interp) <raw_stdout,
	saved_raw_stdout>: New field.
	* mi/mi-interp.c (display_mi_prompt): New parameter 'mi'.  Adjust
	to per-UI raw_stdout.
	(mi_interpreter_init): Adjust to per-UI raw_stdout.
	(mi_on_sync_execution_done, mi_execute_command_input_handler)
	(mi_command_loop): Pass MI instance to display_mi_prompt.
	(mi_on_normal_stop_1, mi_output_running_pid, mi_on_resume_1)
	(mi_on_resume): Adjust to per-UI raw_stdout.
	(saved_raw_stdout): Delete.
	(mi_set_logging): Adjust to per-UI raw_stdout and
	saved_raw_stdout.
	* mi/mi-main.c (raw_stdout): Delete.
	(mi_cmd_gdb_exit, captured_mi_execute_command)
	(mi_print_exception, mi_load_progress): Adjust to per-UI
	raw_stdout.
	(print_diff_now, mi_print_timing_maybe): New ui_file parameter.
	Pass it along.
	(print_diff): New ui_file parameter.  Send output there instead of
	raw_stdout.
	* mi/mi-main.h (struct ui_file): Forward declare.
	(mi_print_timing_maybe): Add ui_file parameter.
2016-06-21 01:11:50 +01:00
Pedro Alves 05beb2750c Introduce display_mi_prompt
Just a refactor.

gdb/ChangeLog:
2016-06-21  Pedro Alves  <palves@redhat.com>

	* mi/mi-interp.c (display_mi_prompt): New function.
2016-06-21 01:11:50 +01:00
Pedro Alves 215d3118fe Make target_terminal_inferior/ours almost nops on non-main UIs
Since we always run the inferior in the main console (unless "set
inferior-tty" is in effect), when some UI other than the main one
calls target_terminal_inferior/target_terminal_inferior, then we only
register/unregister the UI's input from the event loop, but leave the
main UI's terminal settings as is.

gdb/ChangeLog:
2016-06-21  Pedro Alves  <palves@redhat.com>

	* target.c (target_terminal_inferior): Bail out after
	unregistering input_fd if not on the main UI.
	(target_terminal_ours): Bail out after registering input_fd if not
	on the main UI.
	(target_terminal_ours_for_output): Bail out if not on the main UI.
2016-06-21 01:11:49 +01:00
Pedro Alves c61db772bf Always process target events in the main UI
This makes target events always be always processed with the main UI
as current UI.  This way, warnings, debug output, etc. are always
consistently sent to the main console.

gdb/ChangeLog:
2016-06-21  Pedro Alves  <palves@redhat.com>

	* event-top.c (restore_ui_cleanup): Make extern.
	* infrun.c (fetch_inferior_event): Always switch to the main UI.
	* top.h (restore_ui_cleanup): Declare.
2016-06-21 01:11:49 +01:00
Pedro Alves 3c216924d6 Make command line editing (use of readline) be per UI
Due to the way that readline's API works (based on globals), we can
only have one instance of readline in a process.  So the goal of this
patch is to only allow editing in the main UI, and make sure that only
one UI calls into readline.  Some MI paths touch readline variables
currently, which is bad as that is changing variables that matter for
the main console UI.  This patch fixes those.

This actually fixes a nasty bug -- starting gdb in MI mode ("gdb
-i=mi"), and then doing "set editing on" crashes GDB, because MI is
not prepared to use readline:

 set editing on
 &"set editing on\n"
 =cmd-param-changed,param="editing",value="on"
 ^done
 (gdb)
 p 1
 readline: readline_callback_read_char() called with no handler!
 Aborted (core dumped)

The fix for that was to add an interp_proc method to query the
interpreter whether it actually supports editing.  New test included.

gdb/ChangeLog:
2016-06-21  Pedro Alves  <palves@redhat.com>

	PR mi/20034
	* cli/cli-interp.c: Include cli-interp.h and event-top.h.
	(cli_interpreter_resume): Pass 1 to gdb_setup_readline.  Set the
	UI's input_handler here.
	(cli_interpreter_supports_command_editing): New function.
	(cli_interp_procs): Install it.
	* cli/cli-interp.h: New file.
	* event-top.c (async_command_editing_p): Rename to ...
	(set_editing_cmd_var): ... this.
	(change_line_handler): Add parameter 'editing', and use it.  Bail
	early if the interpreter doesn't support editing.  Don't touch
	readline state if editing is off.
	(gdb_rl_callback_handler_remove, gdb_rl_callback_handler_install)
	(gdb_rl_callback_handler_reinstall): Assert the current UI is the
	main UI.
	(display_gdb_prompt): Don't call gdb_rl_callback_handler_remove if
	not using readline.  Check whether the current UI is using command
	editing instead of checking the async_command_editing_p global.
	(set_async_editing_command): Delete.
	(gdb_setup_readline): Add 'editing' parameter.  Only allow editing
	on the main UI.  Don't touch readline state if editing is off.
	(gdb_disable_readline): Don't touch readline state if editing is
	off.
	* event-top.h (gdb_setup_readline): Add 'int' parameter.
	(set_async_editing_command): Delete declaration.
	(change_line_handler, command_line_handler): Declare.
	(async_command_editing_p): Rename to ...
	(set_editing_cmd_var): ... this.
	* infrun.c (reinstall_readline_callback_handler_cleanup): Check
	whether the current UI has editing enabled rather than checking
	the async_command_editing_p global.
	* interps.c (interp_supports_command_editing): New function.
	* interps.h (interp_supports_command_editing_ftype): New typedef.
	(struct interp_procs) <supports_command_editing_proc>: New field.
	(interp_supports_command_editing): Declare.
	* mi/mi-interp.c (mi_interpreter_resume): Pass 0 to
	gdb_setup_readline.  Don't clear the async_command_editing_p
	global.  Update comments.
	* top.c (gdb_readline_wrapper_line, gdb_readline_wrapper): Check
	whether the current UI has editing enabled rather than checking
	the async_command_editing_p global.  Don't touch readline state if
	editing is off.
	(undo_terminal_modifications_before_exit): Switch to the main UI.
	Unconditionally call gdb_disable_readline.
	(set_editing): New function.
	(show_async_command_editing_p): Rename to ...
	(show_editing): ... this.  Show the state of the current UI.
	(_initialize_top): Adjust.
	* top.h (struct ui) <command_editing>: New field.
	* tui/tui-interp.c: Include cli/cli-interp.h.
	(tui_resume): Pass 1 to gdb_setup_readline.  Set the UI's
	input_handler.
	(tui_interp_procs): Install
	cli_interpreter_supports_command_editing.
	* tui/tui-io.c (tui_getc): Check whether the current UI has
	editing enabled rather than checking the async_command_editing_p
	global.

gdb/testsuite/ChangeLog:
2016-06-21  Pedro Alves  <palves@redhat.com>

	PR mi/20034
	* gdb.mi/mi-editing.exp: New file.
2016-06-21 01:11:48 +01:00
Pedro Alves b6dcde571e Make current_ui_out be per UI
Similarly to gdb_stdout&co.

gdb/ChangeLog:
2016-06-21  Pedro Alves  <palves@redhat.com>

	* top.c: Call gen_ret_current_ui_field_ptr for current_uiout.
	* top.h (struct ui) <m_current_uiout>: New field.
	* ui-out.c (current_uiout): Delete.
	* ui-out.h (current_uiout): Delete.
	(current_ui_current_uiout_ptr): New declaration.
	(current_uiout): Reimplement as wrapper around
	current_ui_current_uiout_ptr.
2016-06-21 01:11:48 +01:00
Pedro Alves 23ff98d2fe Delete def_uiout
Currently, current_uiout starts out pointing to def_uiout, a dummy
ui_out implementation.

Since we create a replacement uiout early on as soon as we create the
interpreter, we never actually use def_uiout.  So this patch removes
it.

The proof that it works is that starting with current_uiout set to
NULL does not crash.

gdb/ChangeLog:
2016-06-21  Pedro Alves  <palves@redhat.com>

	* ui-out.c (default_ui_out_impl): Delete.
	(def_uiout): Delete.
	(current_uiout): Set to NULL.
	(default_table_begin, default_table_body, default_table_end)
	(default_table_header, default_begin, default_end)
	(default_field_int, default_field_skip, default_field_string)
	(default_field_fmt, default_spaces, default_text, default_message)
	(default_wrap_hint, default_flush, default_data_destroy): Delete.
2016-06-21 01:11:48 +01:00
Pedro Alves 694ec099d2 Make out and error streams be per UI
stderr_fileopen () references stderr directly, which doesn't work when
we have a separate UI with its own stderr-like stream.  So this also
adds a "errstream" to "struct ui", and plumbs stderr_fileopen to take
a stream parameter.

gdb/ChangeLog:
2016-06-21  Pedro Alves  <palves@redhat.com>

	* event-top.c (gdb_setup_readline): Pass the UI's outstream and
	errstream to stdout_fileopen and stderr_fileopen.
	* exceptions.c: Include top.h.
	(print_flush): Open the current UI's outstream file descriptor,
	instead of hardcoding file descriptor 1.
	* main.c (captured_main): Save the main UI's out and error
	streams.  Adjust stderr_fileopen call.
	* top.h (struct ui) <outstream, errstream>: New fields.
	* ui-file.c (stderr_fileopen): Add stream parameter.  Use it
	instead of stderr.
	* ui-file.h (stderr_fileopen): Add stream parameter and update
	comment.
2016-06-21 01:11:47 +01:00
Pedro Alves 41fd2b0f5d Make input_fd be per UI
And with that, we can switch the current UI to the UI whose input
descriptor woke up the event loop.  IOW, if the user types in UI 2,
the event loop wakes up, switches to UI 2, and processes the input.
Next the user types in UI 3, the event loop wakes up and switches to
UI 3, etc.

gdb/ChangeLog:
2016-06-21  Pedro Alves  <palves@redhat.com>

	* event-top.c (input_fd): Delete.
	(stdin_event_handler): Switch to the UI whose input descriptor got
	the event.  Adjust to per-UI input_fd.
	(gdb_setup_readline): Don't set the input_fd global.  Adjust to
	per-UI input_fd.
	(gdb_disable_readline): Adjust to per-UI input_fd.
	* event-top.h (input_fd): Delete declaration.
	* linux-nat.c (linux_nat_terminal_inferior): Don't remove input_fd
	from the event-loop here.
	(linux_nat_terminal_ours): Don't register input_fd in the
	event-loop here.
	* main.c (captured_main): Adjust to per-UI input_fd.
	* remote.c (remote_terminal_inferior): Don't remove input_fd from
	the event-loop here.
	(remote_terminal_ours): Don't register input_fd in the event-loop
	here.
	* target.c: Include top.h and event-top.h.
	(target_terminal_inferior): Remove input_fd from the event-loop
	here.
	(target_terminal_ours): Register input_fd in the event-loop.
	* top.h (struct ui) <input_fd>: New field.
2016-06-21 01:11:47 +01:00
Pedro Alves f38d3ad186 Make instream be per UI
gdb/ChangeLog:
2016-06-21  Pedro Alves  <palves@redhat.com>

	* cli/cli-script.c (execute_user_command, read_next_line)
	(read_next_line): Adjust to per-UI instream.
	* event-top.c (stdin_event_handler, command_handler)
	(handle_line_of_input, command_line_handler)
	(gdb_readline_no_editing_callback, async_sigterm_handler)
	(gdb_setup_readline): Likewise.
	* inflow.c: Include top.h.
	(gdb_has_a_terminal, child_terminal_init_with_pgrp)
	(gdb_save_tty_state, child_terminal_inferior)
	(child_terminal_ours_1, copy_terminal_info): Use the main UI.
	(initialize_stdin_serial): Adjust to per-UI instream.
	* main.c (captured_command_loop, captured_main): Adjust to per-UI
	instream.
	* mi/mi-interp.c (mi_execute_command_wrapper): Likewise.
	* python/python.c (python_interactive_command): Likewise.
	* terminal.h (struct ui): Forward declare.
	(initialize_stdin_serial): Add struct ui parameter.
	* top.c (instream): Delete.
	(do_restore_instream_cleanup, read_command_file, dont_repeat)
	(gdb_readline_no_editing, command_line_input)
	(input_from_terminal_p, gdb_init): Adjust to per-UI instream.
	* top.h (struct ui) <instream>: New field.
	(instream): Delete declaration.
	(quit): Adjust to per-UI instream.

gdb/testsuite/ChangeLog:
2016-06-21  Pedro Alves  <palves@redhat.com>

	* gdb.gdb/selftest.exp (do_steps_and_nexts): Add new regexp.
2016-06-21 01:11:46 +01:00
Pedro Alves 7c36c34e4c Always run async signal handlers in the main UI
Async signal handlers have no connection to whichever was the current
UI, and thus always run on the main one.

gdb/ChangeLog:
2016-06-21  Pedro Alves  <palves@redhat.com>

	* event-loop.c: Include top.h.
	(invoke_async_signal_handlers): Switch to the main UI.
	* event-top.c (main_ui_): Update comment.
	(main_ui): New global.
	* top.h (main_ui): Declare.
2016-06-21 01:11:46 +01:00
Pedro Alves 73ab01a07d Make the intepreters output to all UIs
When we have multiple consoles, MI channels, etc., then we need to
broadcast breakpoint hits, etc. to all UIs.  In the past, I've
adjusted most of the run control to communicate events to the
interpreters through observer notifications, so events would be
properly sent to console and MI streams, in sync and async modes.

This patch does the next logical step -- have each interpreter's
observers output interpreter-specific info to _all_ UIs.

Note that when we have multiple instances of active cli/tui
interpreters, then the cli_interp and tui_interp globals no longer
work.  This is addressed by this patch.

Also, the interpreters currently register some observers when resumed
and remove them when suspended.  If we have multiple instances of the
interpreters, and they can be suspended/resumed at different,
independent times, that no longer works.  What we instead do is always
install the observers, and then have the observers themselves know
when to do nothing.

An earlier prototype of this series did the looping over struct UIs in
common code, and then dispatched events to the interpreters through a
matching interp_on_foo method for each observer.  That turned out a
lot more complicated than the present solution, as we'd end up with
having to create a new interp method every time some interpreter
wanted to listen to some observer notification, resulting in a lot of
duplicated make-work and more coupling than desirable.

gdb/ChangeLog:
2016-06-21  Pedro Alves  <palves@redhat.com>

	* cli/cli-interp.c (cli_interp): Delete.
	(as_cli_interp): New function.
	(cli_on_normal_stop, cli_on_signal_received)
	(cli_on_end_stepping_range, cli_on_signal_exited, cli_on_exited)
	(cli_on_no_history): Send output to all CLI UIs.
	(cli_on_sync_execution_done, cli_on_command_error): Skip output if
	the top level interpreter is not a CLI.
	(cli_interpreter_init): Don't set cli_interp or install observers
	here.
	(_initialize_cli_interp): Install observers here.
	* event-top.c (main_ui_, ui_list): New globals.
	(current_ui): Point to main_ui_.
	(restore_ui_cleanup, switch_thru_all_uis_init)
	(switch_thru_all_uis_cond, switch_thru_all_uis_next): New
	functions.
	* mi/mi-interp.c (as_mi_interp): New function.
	(mi_interpreter_init): Don't install observers here.
	(mi_on_sync_execution_done): Skip output if the top level
	interpreter is not a MI.
	(mi_new_thread, mi_thread_exit, mi_record_changed)
	(mi_inferior_added, mi_inferior_appeared, mi_inferior_exit)
	(mi_inferior_removed): Send output to all MI UIs.
	(find_mi_interpreter, mi_interp_data): Delete.
	(find_mi_interp): New function.
	(mi_on_signal_received, mi_on_end_stepping_range)
	(mi_on_signal_exited, mi_on_exited, mi_on_no_history): Send output
	to all MI UIs.
	(mi_on_normal_stop): Rename to ...
	(mi_on_normal_stop_1): ... this.
	(mi_on_normal_stop): Reimplement, sending output to all MI UIs.
	(mi_traceframe_changed, mi_tsv_created, mi_tsv_deleted)
	(mi_tsv_modified, mi_breakpoint_created, mi_breakpoint_deleted)
	(mi_breakpoint_modified, mi_output_running_pid): Send output to
	all MI UIs.
	(mi_on_resume): Rename to ...
	(mi_on_resume_1): ... this.  Don't handle infcalls here.
	(mi_on_resume): Reimplement, sending output to all MI UIs.
	(mi_solib_loaded, mi_solib_unloaded, mi_command_param_changed)
	(mi_memory_changed): Send output to all MI UIs.
	(report_initial_inferior): Install observers here.
	* top.h (struct ui) <next>: New field.
	(ui_list): Declare.
	(struct switch_thru_all_uis): New.
	(switch_thru_all_uis_init, switch_thru_all_uis_cond)
	(switch_thru_all_uis_next): Declare.
	(SWITCH_THRU_ALL_UIS): New macro.
	* tui/tui-interp.c (tui_interp): Delete global.
	(as_tui_interp): New function.
	(tui_on_normal_stop, tui_on_signal_received)
	(tui_on_end_stepping_range, tui_on_signal_exited, tui_on_exited)
	(tui_on_no_history): Send output to all TUI UIs.
	(tui_on_sync_execution_done, tui_on_command_error): Skip output if
	the top level interpreter is not a TUI.
	(tui_init): Don't set tui_interp or install observers here.
	(_initialize_tui_interp): Install observers here.
2016-06-21 01:11:45 +01:00
Pedro Alves 8322445e05 Introduce interpreter factories
If every UI instance has its own set of interpreters, then the current
scheme of creating the interpreters at GDB initialization time no
longer works.  We need to create them whenever a new UI instance is
created.

The scheme implemented here has each interpreter register a factory
callback that when called creates a new instance of a specific
interpreter type.  Then, when some code in gdb looks up an interpreter
(always by name), if there's none yet, the factory method is called to
construct one.

gdb/ChangeLog:
2016-06-21  Pedro Alves  <palves@redhat.com>

	* cli/cli-interp.c (cli_uiout): Delete, moved into ...
	(struct cli_interp): ... this new structure.
	(cli_on_normal_stop, cli_on_signal_received)
	(cli_on_end_stepping_range, cli_on_signal_exited, cli_on_exited)
	(cli_on_no_history): Use interp_ui_out.
	(cli_interpreter_init): If top level, set the cli_interp global.
	(cli_interpreter_init): Return the interp's data instead of NULL.
	(cli_interpreter_resume, cli_interpreter_exec, cli_ui_out): Adjust
	to cli_uiout being in the interpreter's data.
	(cli_interp_procs): New, factored out from _initialize_cli_interp.
	(cli_interp_factory): New function.
	(_initialize_cli_interp): Call interp_factory_register.
	* interps.c (get_interp_info): New, factored out from ...
	(get_current_interp_info): ... this.
	(interp_new): Add parameter 'data'.  Store it.
	(struct interp_factory): New function.
	(interp_factory_p): New typedef.  Define a VEC_P.
	(interpreter_factories): New global.
	(interp_factory_register): New function.
	(interp_add): Add 'ui' parameter.  Use get_interp_info and
	interp_lookup_existing.
	(interp_lookup): Rename to ...
	(interp_lookup_existing): ... this.  Add 'ui' parameter.  Don't
	check for NULL or empty name here.
	(interp_lookup): Add 'ui' parameter and reimplement.
	(interp_set_temp, interpreter_exec_cmd): Adjust.
	(interpreter_completer): Complete on registered interpreter
	factories instead of interpreters.
	* interps.h (interp_factory_func): New typedef.
	(interp_factory_register): Declare.
	(interp_new, interp_add): Adjust.
	(interp_lookup): Declare.
	* main.c (captured_main): Adjust.
	* mi/mi-interp.c (mi_cmd_interpreter_exec): Adjust.
	(mi_interp_procs): New, factored out from
	_initialize_mi_interp.
	(mi_interp_factory): New function.
	* python/python.c (execute_gdb_command): Adjust.
	* tui/tui-interp.c (tui_init): If top level, set the tui_interp
	global.
	(tui_interp_procs): New.
	(tui_interp_factory): New function.
	(_initialize_tui_interp): Call interp_factory_register.
2016-06-21 01:11:45 +01:00
Pedro Alves cb81451067 Make the interpreters be per UI
Make each UI have its own interpreter list, top level interpreter,
current interpreter, etc.  The "interpreter_async" global is not
really specific to an struct interp (it crosses interpreter-exec ...),
so I moved it to "struct ui" directly, while the other globals were
left hidden in interps.c, opaque to the rest of GDB.

gdb/ChangeLog:
2016-06-21  Pedro Alves  <palves@redhat.com>

	* breakpoint.c (bpstat_do_actions_1): Access the current UI's
	async field instead of the interpreter_async global.
	* cli/cli-script.c (execute_user_command, while_command)
	(if_command, script_from_file): Likewise.
	* compile/compile.c: Include top.h instead of interps.h.
	(compile_file_command, compile_code_command)
	(compile_print_command): Access the current UI's async field
	instead of the interpreter_async global.
	* guile/guile.c: Include top.h instead of interps.h.
	(guile_repl_command, guile_command, gdbscm_execute_gdb_command):
	Access the current UI's async field instead of the
	interpreter_async global.
	* guile/scm-ports.c: Include top.h instead of interps.h.
	(ioscm_with_output_to_port_worker): Access the current UI's async
	field instead of the interpreter_async global.
	* inf-loop.c (inferior_event_handler): Likewise.
	* infcall.c (run_inferior_call): Likewise.
	* infrun.c (reinstall_readline_callback_handler_cleanup)
	(fetch_inferior_event): Likewise.
	* interps.c (interpreter_async): Delete.
	(struct ui_interp_info): New.
	(get_current_interp_info): New function.
	(interp_list, current_interpreter, top_level_interpreter_ptr):
	Delete.
	(interp_add, interp_set, interp_lookup, interp_ui_out)
	(current_interp_set_logging, interp_set_temp)
	(current_interp_named_p): Adjust to per-UI interpreters.
	(command_interpreter): Delete.
	(command_interp, current_interp_command_loop, interp_quiet_p)
	(interp_exec, interpreter_exec_cmd, interpreter_completer)
	(top_level_interpreter, top_level_interpreter_data): Adjust to
	per-UI interpreters.
	* interps.h (interpreter_async): Delete.
	* main.c (captured_command_loop): Access the current UI's async
	field instead of the interpreter_async global.
	* python/python.c (python_interactive_command, python_command)
	(execute_gdb_command): Likewise.
	* top.c (maybe_wait_sync_command_done, execute_command_to_string):
	Access the current UI's async field instead of the
	interpreter_async global.
	* top.h (struct tl_interp_info): Forward declare.
	(struct ui) <interp_info, async>: New fields.
2016-06-21 01:11:45 +01:00
Pedro Alves 79aa2fe86f Make gdb_stdout&co be per UI
We need to have these send output to the proper UI.

However, this patch still make them look like globals.  Kind of like
__thread variables, if you will.  Changing everything throughout to
write something like current_ui->gdb_stdout instead would be massive
overkill, IMNSHO.

This leaves gdb_stdtargin/stdtarg/stdtargerr global, but maybe that was a
mistake, I'm not sure -- IIRC, MI formats target I/O differently, so
if we have a separate MI channel, then I guess target output should go
there instead of to gdb's stdout.  OTOH, maybe GDB should send that
instead to "set inferior-tty", instead of multiplexing it over MI.  We
can always fix those later when it gets clearer where they should go.

gdb/ChangeLog:
2016-06-21  Pedro Alves  <palves@redhat.com>

	* main.c (gdb_stdout, gdb_stderr, gdb_stdlog, gdb_stdin): Delete
	globals.
	(gen_ret_current_ui_field_ptr): New macro.  Use it to generate
	wrappers for gdb_stdout, gdb_stderr, gdb_stdlog and gdb_stdin.
	* top.h (struct ui) <m_gdb_stdout, m_gdb_stdin, m_gdb_stderr,
	m_gdb_stdlog>: New fields.
	(current_ui_gdb_stdout_ptr, current_ui_gdb_stdin_ptr)
	(current_ui_gdb_stderr_ptr, current_ui_gdb_stdlog_ptr): Declare.
	(gdb_stdout, gdb_stdin, gdb_stderr, gdb_stdlog): Reimplement as
	macros.
2016-06-21 01:11:44 +01:00
Pedro Alves a74e1786ac Introduce "struct ui"
This is a step towards supporting multiple consoles/MIs, each on its
own stdio streams / terminal.

See intro comment in top.h.

(I've had trouble picking a name for this object.  I've started out
with "struct console" originally.  But then this is about MI as well,
and there's "interpreter-exec console", which is specifically about
the CLI...

So I changed to "struct terminal", but, then we have a terminal object
that works when the input is not a terminal as well ...

Then I sort of gave up and renamed it to "struct top_level".  But it
then gets horribly confusing when we talk about the "top level
interpreter that's running on the current top level".

In the end, I realized we're already sort of calling this "ui", in
struct ui_out, struct ui_file, and a few coments here and there.)

gdb/ChangeLog:
2016-06-21  Pedro Alves  <palves@redhat.com>

	* event-top.c: Update readline-related comments.
	(input_handler, call_readline): Delete globals.
	(gdb_rl_callback_handler): Call the current UI's input_handler
	method.
	(change_line_handler): Adjust to set current UI's properties
	instead of globals.
	(current_ui_, current_ui): New globals.
	(get_command_line_buffer): Rewrite to refer to the current UI.
	(stdin_event_handler): Adjust to call the call_readline method of
	the current UI.
	(gdb_readline_no_editing_callback): Adjust to call the current UI's
	input_handler method.
	(gdb_setup_readline): Adjust to set current UI's properties
	instead of globals.
	* event-top.h (call_readline, input_handler): Delete declarations.
	* mi/mi-interp.c (mi_interpreter_resume): Adjust to set current
	UI's properties instead of globals.
	* top.c (gdb_readline_wrapper_cleanup): Adjust to set current UI's
	properties instead of globals.
	(gdb_readline_wrapper): Adjust to call and set current UI's
	methods instead of globals.
	* top.h: Include buffer.h and event-loop.h.
	(struct ui): New struct.
	(current_ui): New declaration.
2016-06-21 01:11:44 +01:00
Pedro Alves 45db7c09c3 [Ada catchpoints] Fix "warning: failed to get exception name: No definition of \"e.full_name\" in current context"
Looking at testsuite results, I noticed this warning in an MI test:

 ~"\nCatchpoint "
 ~"2, "
 &"warning: failed to get exception name: No definition of \"e.full_name\" in current context.\n"
 ~"exception at 0x000000000040192d in foo () at /home/pedro/brno/pedro/gdb/mygit/src/gdb/testsuite/gdb.ada/mi_catch_ex/foo.adb:20\n"
 ~"20\t      raise Constraint_Error;  -- SPOT1\n"
 *stopped,reason="breakpoint-hit",disp="keep",bkptno="2",exception-name="CONSTRAINT_ERROR",frame={addr="0x000000000040192d",func="foo",args=[],file="/home/pedro/brno/pedro/gdb/mygit/src/gdb/testsuite/gdb.ada/mi_catch_ex/foo.adb",fullname="/home/pedro/brno/pedro/gdb/mygit/src/gdb/testsuite/gdb.ada/mi_catch_ex/foo.adb",line="20"},thread-id="1",stopped-threads="all",core="5"
 (gdb)
 PASS: gdb.ada/mi_catch_ex.exp: continue until CE caught by all-exceptions catchpoint

The problem is that:

  - MI prints the breakpoint hit twice: once on the MI stream;
    another time on the console stream.

  - After printing the Ada catchpoint hit, gdb selects a non-current
    frame, from within the catchpoint's print_it routine.

So the second time the breakpoint is printed, the selected frame is no
longer the current frame, and then evaluating e.full_name in
ada_exception_name_addr fails.

This commit fixes the problem and enhances the gdb.ada/mi_catch_ex.exp
test to make sure the catchpoint hit is printed correctly on the
console stream too.

gdb/ChangeLog:
2016-06-21  Pedro Alves  <palves@redhat.com>

	* ada-lang.c (ada_exception_name_addr_1): Add comment.
	(print_it_exception): Select the current frame.

gdb/testsuite/ChangeLog:
2016-06-21  Pedro Alves  <palves@redhat.com>

	* gdb.ada/mi_catch_ex.exp (continue_to_exception): New procedure.
	(top level): Use it instead of mi_execute_to.
2016-06-21 01:11:43 +01:00
Pedro Alves 5a069ab36d Prepare gdb.python/mi-py-events.exp for Python/MI in separate channels
Similarly to 5068630ad3
(gdb.python/py-events.exp and normal_stop observers ordering) [1],
this commit makes the gdb.python/py-mi-events.exp test not rely on
order in which MI and Python observers run, or even on where each
observer sends its output to.

This shows up as a problem when testing with MI running as a separate
terminal, for example, where Python event output and MI output go to
different channels, even.  But in any case, relying on the order in
which observers run is always going to be fragile.

The fix is to save the string output in the handlers in some variables
and then having MI print them explicitly, instead of printing them
directly from the Python events.

Tested on x86_64 Fedora 23.

https://sourceware.org/ml/gdb-patches/2015-07/msg00290.html

gdb/testsuite/ChangeLog:
2016-06-21  Pedro Alves  <palves@redhat.com>

	* gdb.python/py-mi-events-gdb.py (stop_handler_str)
	(cont_handler_str): New.
	(signal_stop_handler): Set stop_handler_str instead of printing to
	stdout.
	(continue_handler): Set cont_handler_str instead of printing to
	stdout.
	* gdb.python/py-mi-events.exp: Ues mi_execute_to instead of
	mi_send_resuming_command.  Print stop_handler_str and
	cont_handler_str instead of expecting the python events print
	directly.
2016-06-21 01:11:43 +01:00
GDB Administrator 4fdf8fa604 Automatic date update in version.in 2016-06-21 00:00:18 +00:00
Maciej W. Rozycki ff03d62a82 MIPS/GAS/testsuite: Uniquely identify MIPS64r6 tests
gas/
	* testsuite/gas/mips/r6-64-n32.d: Change the `name' tag.
	* testsuite/gas/mips/r6-64-n64.d: Likewise.
2016-06-20 23:43:24 +01:00
Maciej W. Rozycki 507dcb323a MIPS/GAS: Update comment on jump reloc conversion
Complement commit 44d3da2338 ("MIPS/GAS: Treat local jump relocs the
same no matter if REL or RELA") and update and clarify the comment on
jump reloc conversion.

	gas/
	* config/tc-mips.c (mips_fix_adjustable): Update comment on jump
	reloc conversion.
2016-06-20 23:41:32 +01:00
H.J. Lu 8474a88fd2 gold/x86: Handle output without PLT
If there is no PLT in output, return 0 for first_plt_entry_offset and
plt_entry_size.

	PR gold/20245
	* i386.cc (Target_i386::first_plt_entry_offset): Return 0 if
	plt_ is NULL.
	(Target_i386::plt_entry_size): Likewise.
	(Target_x86_64<size>::first_plt_entry_offset): Likewise.
	(Target_x86_64<size>::plt_entry_size): Likewise.
2016-06-20 12:28:32 -07:00
Vladimir Radosavljevic a8ecc9fe61 Add support for MIPS .rld_map section.
Includes DT_MIPS_RLD_MAP and DT_MIPS_RLD_MAP_REL dynamic tags and
__RLD_MAP symbol.

2016-06-20  Vladimir Radosavljevic  <Vladimir.Radosavljevic@imgtec.com>

elfcpp/
        * elfcpp.h (DT_MIPS_RLD_MAP_REL): New enum constant.
gold/
        * mips.cc (Target_mips::Target_mips): Initialize rld_map_.
        (Target_mips::rld_map_): New data member.
        (Target_mips::do_finalize_sections): Add support for
        DT_MIPS_RLD_MAP and DT_MIPS_RLD_MAP_REL dynamic tags,
        .rld_map section, and __RLD_MAP symbol.
        (Target_mips::do_dynamic_tag_custom_value): Add support for
        DT_MIPS_RLD_MAP_REL dynamic tag.
        * output.cc (Output_data_dynamic::get_entry_offset): New method
        definition.
        * output.h (Output_data_dynamic::get_entry_offset): New method
        declaration.
2016-06-20 12:16:26 -07:00
Vladimir Radosavljevic beceef5043 Add unaligned check for R_MIPS_PC16.
gold/
        * mips.cc (Mips_relocate_functions::relpc16): Add unaligned check.
2016-06-20 12:06:56 -07:00
Vladimir Radosavljevic f5b117594f Add support for Mips32r6 and Mips64r6.
elfcpp/
	* mips.h (R_MIPS_PC21_S2, R_MIPS_PC26_S2, R_MIPS_PC18_S3,
	R_MIPS_PC19_S2, R_MIPS_PCHI16, R_MIPS_PCLO16): New enums for
	Mips32r6 and Mips64r6 relocations.
	(r6_isa): New function.
gold/
	* mips.cc (relocation_needs_la25_stub): Add support for relocs:
	R_MIPS_PC21_S2 and R_MIPS_PC26_S2.
	(hi16_reloc): Add support for R_MIPS_PCHI16 relocation.
	(is_matching_lo16_reloc): Likewise.
	(lo16_reloc): Add support for R_MIPS_PCLO16 relocation.
	(Mips_output_data_plt::plt_entry_r6): New static data member for
	R6 PLT entry.
	(Target_mips::is_output_r6): New method.
	(Target_mips::Mips_mach): Add new enum constants.
	(Mips_relocate_functions::Status): Likewise.
	(Mips_relocate_functions::pchi16_relocs): New static data member.
	(Mips_relocate_functions::relpc21): New method.
	(Mips_relocate_functions::relpc26): Likewise.
	(Mips_relocate_functions::relpc18): Likewise.
	(Mips_relocate_functions::relpc19): Likewise.
	(Mips_relocate_functions::relpchi16): Likewise.
	(Mips_relocate_functions::do_relpchi16): Likewise.
	(Mips_relocate_functions::relpclo16): Likewise.
	(Mips_output_data_plt::do_write): Add support for Mips r6 plt
	entry.
	(Target_mips::mips_32bit_flags): Add E_MIPS_ARCH_32R6 support.
	(Target_mips::elf_mips_mach): Add E_MIPS_ARCH_32R6 and
	E_MIPS_ARCH_64R6 support.
	(Target_mips::update_abiflags_isa): Likewise.
	(mips_get_size_for_reloc): Add support for relocs: R_MIPS_PCHI16,
	R_MIPS_PCLO16, R_MIPS_PC21_S2, R_MIPS_PC26_S2, R_MIPS_PC18_S3 and
	R_MIPS_PC19_S2.
	(Target_mips::Scan::local): Add support for relocs: R_MIPS_PCHI16
	and R_MIPS_PCLO16.
	(Target_mips::Scan::global): Add support for relocs:
	R_MIPS_PC21_S2 and R_MIPS_PC26_S2.
	(Target_mips::Relocate::relocate): Call functions for resolving
	Mips32r6 and Mips64r6 relocations, and print error message for
	STATUS_PCREL_UNALIGNED.
	(Target_mips::Scan::get_reference_flags): Add support for relocs:
	R_MIPS_PCHI16, R_MIPS_PCLO16, R_MIPS_PC21_S2, R_MIPS_PC26_S2,
	R_MIPS_PC18_S3 and R_MIPS_PC19_S2.
	(Target_mips::elf_mips_mach_name): Add E_MIPS_ARCH_32R6 and
	E_MIPS_ARCH_64R6 support.
2016-06-20 11:45:18 -07:00
H.J. Lu 7dc3990e40 Use the IR symbol table for the IR input object
ELF linker shouldn't skip the IR object when searching the symbol table
of an archive element.  If linker doesn't know if the object file is an
IR object, it should give LTO plugin a chance to get the correct symbol
table and use the IR symbol table if the input is an IR object.

bfd/

	PR ld/18250
	PR ld/20267
	* elflink.c: Include plugin.h if BFD_SUPPORTS_PLUGINS is
	defined.
	(elf_link_is_defined_archive_symbol): Call
	bfd_link_plugin_object_p on unknown plugin object and use the
	IR symbol table if the input is an IR object.
	* plugin.c (bfd_link_plugin_object_p): New function.
	* plugin.h (bfd_link_plugin_object_p): New prototype.

ld/

	PR ld/20267
	* testsuite/ld-plugin/lto.exp (lto_link_tests): Add test for
	PR ld/20267.
	(lto_run_tests): Likewise.
	* testsuite/ld-plugin/pr20267a.c: New file.
	* testsuite/ld-plugin/pr20267b.c: Likewise.
2016-06-20 05:10:46 -07:00
Virendra Pathak 9f99c22eb7 Update the feature set for the Vulcan AArch64 cpu.
gas	* config/tc-aarch64.c (aarch64_cpus): Update vulcan feature set.
2016-06-20 09:26:43 +01:00
Alan Modra 0616a28038 PR ld/20276: Set non_ir_ref on common symbol
Also, don't check alignment on symbol from plugin dummy input.

bfd/
	PR ld/20276
	* elflink.c (elf_link_add_object_symbols): Don't check alignment
	on symbol from plugin dummy input.
ld/
	PR ld/20276
	* plugin.c (plugin_notice): Set non_ir_ref on common symbols.
	* testsuite/ld-plugin/lto.exp (lto_link_tests): Add test for
	PR ld/20276.
	(lto_run_tests): Likewise.
	* testsuite/ld-plugin/pass.out: New file.
	* testsuite/ld-plugin/pr20276a.c: Likewise.
	* testsuite/ld-plugin/pr20276b.c: Likewise.
2016-06-20 11:26:13 +09:30
GDB Administrator 6336b4b737 Automatic date update in version.in 2016-06-20 00:00:17 +00:00
GDB Administrator 9a4f2f5dad Automatic date update in version.in 2016-06-19 00:00:22 +00:00
H.J. Lu 49f30d83f6 Rename bfd_plugin_uknown to bfd_plugin_unknown
bfd/

	* bfd.c (bfd_plugin_format): Rename bfd_plugin_uknown to
	bfd_plugin_unknown.
	* bfd-in2.h: Regenerated.
	* plugin.c (bfd_plugin_object_p): Replace bfd_plugin_uknown
	with bfd_plugin_unknown.

ld/

	* plugin.c (plugin_object_p): Replace bfd_plugin_uknown
	with bfd_plugin_unknown.
2016-06-18 14:15:31 -07:00
H.J. Lu 233cc9c13a Don't generate PLT for IFUNC GOT/pointer reference
If a backend supports it, PLT entry isn't needed when all references
to a STT_GNU_IFUNC symbols are done via GOT or static function pointers.
For GOT entries, We generate dynamic R_*_GLOB_DAT relocations for
preemptable symbols and R_*_IRELATIVE relocations for non-preemptable
symbols to update them with real function address.  For static pointer
pointers, we generate dynamic pointer relocations and store them in:

1. .rel[a].ifunc section in PIC object.
2. .rel[a].got section in dynamic executable.
3. .rel[a].iplt section in static executable.

We don't allocate GOT entry if it isn't used.

bfd/

	PR ld/20253
	* elf-bfd.h (_bfd_elf_allocate_ifunc_dyn_relocs): Add an
	bfd_boolean argument.
	* elf-ifunc.c (_bfd_elf_create_ifunc_sections): Replace
	"shared object" with "PIC object" in comments.
	(_bfd_elf_allocate_ifunc_dyn_relocs): Updated.  Replace
	"shared object" with "PIC object" in comments.  Avoid PLT if
	requested.  Generate dynamic relocations for non-GOT references.
	Make room for the special first entry in PLT and allocate PLT
	entry only for PLT and PC-relative references.  Store dynamic
	GOT relocations in .rel[a].iplt section for static executables.
	If PLT isn't used, always use GOT for symbol value.  Don't
	allocate GOT entry if it isn't used.
	* elf32-i386.c (elf_i386_check_relocs): Increment PLT reference
	count only in the code section.  Allocate dynamic pointer
	relocation against STT_GNU_IFUNC symbol in the non-code section.
	(elf_i386_adjust_dynamic_symbol): Increment PLT reference count
	only for PC-relative references.
	(elf_i386_allocate_dynrelocs): Pass TRUE to
	_bfd_elf_allocate_ifunc_dyn_relocs.
	(elf_i386_relocate_section): Allow R_386_GOT32/R_386_GOT32X
	relocations against STT_GNU_IFUNC symbols without PLT.  Generate
	dynamic pointer relocation against STT_GNU_IFUNC symbol in
	the non-code section and store it in the proper REL section.
	Don't allow non-pointer relocation against STT_GNU_IFUNC symbol
	without PLT.
	(elf_i386_finish_dynamic_symbol): Generate dynamic
	R_386_IRELATIVE and R_386_GLOB_DAT GOT relocations against
	STT_GNU_IFUNC symbols without PLT.
	(elf_i386_finish_dynamic_sections): Don't handle local
	STT_GNU_IFUNC symbols here.
	(elf_i386_output_arch_local_syms): Handle local STT_GNU_IFUNC
	symbols here.
	(elf_backend_output_arch_local_syms): New.
	* elf32-x86-64.c (elf_i386_check_relocs): Increment PLT reference
	count only in the code section.  Allocate dynamic pointer
	relocation against STT_GNU_IFUNC symbol in the non-code section.
	(elf_x86_64_adjust_dynamic_symbol): Increment PLT reference
	count only for PC-relative references.
	(elf_x86_64_allocate_dynrelocs): Pass TRUE to
	_bfd_elf_allocate_ifunc_dyn_relocs.
	(elf_x86_64_relocate_section): Allow R_X86_64_GOTPCREL,
	R_X86_64_GOTPCRELX, R_X86_64_REX_GOTPCRELX and
	R_X86_64_GOTPCREL64 relocations against STT_GNU_IFUNC symbols
	without PLT.  Generate dynamic pointer relocation against
	STT_GNU_IFUNC symbol in the non-code section and store it in
	the proper RELA section.  Don't allow non-pointer relocation
	against STT_GNU_IFUNC symbol without PLT.
	(elf_x86_64_finish_dynamic_symbol): Generate dynamic
	R_X86_64_IRELATIVE and R_X86_64_GLOB_DAT GOT relocations against
	STT_GNU_IFUNC symbols without PLT.
	(elf_x86_64_finish_dynamic_sections): Don't handle local
	STT_GNU_IFUNC symbols here.
	(elf_x86_64_output_arch_local_syms): Handle local STT_GNU_IFUNC
	symbols here.
	(elf_backend_output_arch_local_syms): New.
	* elfnn-aarch64.c (elfNN_aarch64_allocate_ifunc_dynrelocs):
	Pass FALSE to _bfd_elf_allocate_ifunc_dyn_relocs.

ld/

	PR ld/20253
	* testsuite/ld-i386/i386.exp: Run PR ld/20253 tests.
	* testsuite/ld-i386/no-plt.exp: Likewise.
	* testsuite/ld-x86-64/no-plt.exp: Likewise.
	* testsuite/ld-i386/pr13302.d: Remove .rel.plt section.
	* testsuite/ld-ifunc/ifunc-13-i386.d: Likewise.
	* testsuite/ld-ifunc/ifunc-13-x86-64.d: Likewise.
	* testsuite/ld-ifunc/ifunc-15-i386.d: Likewise.
	* testsuite/ld-ifunc/ifunc-15-x86-64.d: Likewise.
	* testsuite/ld-x86-64/pr13082-5a.d: Likewise.
	* testsuite/ld-x86-64/pr13082-5b.d: Likewise.
	* testsuite/ld-x86-64/pr13082-6a.d: Likewise.
	* testsuite/ld-x86-64/pr13082-6b.d: Likewise.
	* testsuite/ld-i386/pr20244-2a.d: Remove .plt section.
	* testsuite/ld-ifunc/ifunc-21-i386.d: Likewise.
	* testsuite/ld-ifunc/ifunc-21-x86-64.d: Likewise.
	* testsuite/ld-ifunc/ifunc-22-i386.d: Likewise.
	* testsuite/ld-ifunc/ifunc-22-x86-64.d: Likewise.
	* testsuite/ld-i386/pr20244-2b.d: Updated.
	* testsuite/ld-i386/pr20244-2c.d: Likewise.
	* testsuite/ld-ifunc/ifunc-18a-i386.d: Likewise.
	* testsuite/ld-ifunc/ifunc-18a-x86-64.d: Likewise.
	* testsuite/ld-ifunc/ifunc-18b-i386.d: Likewise.
	* testsuite/ld-ifunc/ifunc-18b-x86-64.d: Likewise.
	* testsuite/ld-i386/pr20253-1a.c: New file.
	* testsuite/ld-i386/pr20253-1b.S: Likewise.
	* testsuite/ld-i386/pr20253-1c.S: Likewise.
	* testsuite/ld-i386/pr20253-1d.S: Likewise.
	* testsuite/ld-i386/pr20253-2a.c: Likewise.
	* testsuite/ld-i386/pr20253-2b.S: Likewise.
	* testsuite/ld-i386/pr20253-2c.S: Likewise.
	* testsuite/ld-i386/pr20253-2d.S: Likewise.
	* testsuite/ld-i386/pr20253-3.d: Likewise.
	* testsuite/ld-i386/pr20253-3.s: Likewise.
	* testsuite/ld-i386/pr20253-4.s: Likewise.
	* testsuite/ld-i386/pr20253-4a.d: Likewise.
	* testsuite/ld-i386/pr20253-4b.d: Likewise.
	* testsuite/ld-i386/pr20253-4c.d: Likewise.
	* testsuite/ld-i386/pr20253-5.d: Likewise.
	* testsuite/ld-i386/pr20253-5.s: Likewise.
	* testsuite/ld-ifunc/ifunc-23-x86.s: Likewise.
	* testsuite/ld-ifunc/ifunc-23a-x86.d: Likewise.
	* testsuite/ld-ifunc/ifunc-23b-x86.d: Likewise.
	* testsuite/ld-ifunc/ifunc-23c-x86.d: Likewise.
	* testsuite/ld-ifunc/ifunc-24-x86.s: Likewise.
	* testsuite/ld-ifunc/ifunc-24a-x86.d: Likewise.
	* testsuite/ld-ifunc/ifunc-24b-x86.d: Likewise.
	* testsuite/ld-ifunc/ifunc-24c-x86.d: Likewise.
	* testsuite/ld-ifunc/ifunc-25-x86.s: Likewise.
	* testsuite/ld-ifunc/ifunc-25a-x86.d: Likewise.
	* testsuite/ld-ifunc/ifunc-25b-x86.d: Likewise.
	* testsuite/ld-ifunc/ifunc-25c-x86.d: Likewise.
	* testsuite/ld-x86-64/pr20253-1.s: Likewise.
	* testsuite/ld-x86-64/pr20253-1a.d: Likewise.
	* testsuite/ld-x86-64/pr20253-1b.d: Likewise.
	* testsuite/ld-x86-64/pr20253-1c.d: Likewise.
	* testsuite/ld-x86-64/pr20253-1d.d: Likewise.
	* testsuite/ld-x86-64/pr20253-1e.d: Likewise.
	* testsuite/ld-x86-64/pr20253-1f.d: Likewise.
	* testsuite/ld-x86-64/pr20253-1g.d: Likewise.
	* testsuite/ld-x86-64/pr20253-1h.d: Likewise.
	* testsuite/ld-x86-64/pr20253-1i.d: Likewise.
	* testsuite/ld-x86-64/pr20253-1j.d: Likewise.
	* testsuite/ld-x86-64/pr20253-1k.d: Likewise.
	* testsuite/ld-x86-64/pr20253-1l.d: Likewise.
	* testsuite/ld-x86-64/pr20253-2a.c: Likewise.
	* testsuite/ld-x86-64/pr20253-2b.S: Likewise.
	* testsuite/ld-x86-64/pr20253-2c.S: Likewise.
	* testsuite/ld-x86-64/pr20253-2d.S: Likewise.
	* testsuite/ld-x86-64/pr20253-3.d: Likewise.
	* testsuite/ld-x86-64/pr20253-3.s: Likewise.
	* testsuite/ld-x86-64/pr20253-4.s: Likewise.
	* testsuite/ld-x86-64/pr20253-4a.d: Likewise.
	* testsuite/ld-x86-64/pr20253-4b.d: Likewise.
	* testsuite/ld-x86-64/pr20253-4c.d: Likewise.
	* testsuite/ld-x86-64/pr20253-4d.d: Likewise.
	* testsuite/ld-x86-64/pr20253-4e.d: Likewise.
	* testsuite/ld-x86-64/pr20253-4f.d: Likewise.
	* testsuite/ld-x86-64/pr20253-5.s: Likewise.
	* testsuite/ld-x86-64/pr20253-5a.d: Likewise.
	* testsuite/ld-x86-64/pr20253-5b.d: Likewise.
	* testsuite/ld-ifunc/ifunc-18a-i386.d: Remove extra IRELATIVE
	relocation.
	* testsuite/ld-ifunc/ifunc-18a-x86-64.d: Likewise.
	* testsuite/ld-ifunc/ifunc-18b-i386.d: Likewise.
	* testsuite/ld-ifunc/ifunc-18b-x86-64.d: Likewise.
	* testsuite/ld-ifunc/ifunc-18a.s: Fix a typo.
	* testsuite/ld-x86-64/x86-64.exp: Run pr20253-1 tests.
2016-06-18 09:17:25 -07:00
GDB Administrator 854594f5ce Automatic date update in version.in 2016-06-18 00:00:20 +00:00
Sanjoy Das 2838cc1d36 Add a test case for the jit-reader interface
Originally intended to be committed on 2013-01-17 in
675921c059 (Test case for the
jit-reader), but by mistake the files were not added.  Fortunately
they still work.

gdb/testsuite/ChangeLog:
2016-06-17  Sanjoy Das  <sanjoy@playingwithpointers.com>

	* gdb.base/jit-reader.exp: New file.
	* gdb.base/jithost.c: New file.
	* gdb.base/jithost.h: New file.
	* gdb.base/jitreader.c : New file.
	* gdb.base/jit-protocol.h: New file.
2016-06-17 19:24:08 +01:00