PR 22133
* config/tc-msp430.c (parse_exp): Skip an 'h' suffix to constant
expressions.
(msp430_srcoperand): Check that the entire text was parsed by
parse_exp.
(msp430_operands): Likewise.
* testsuite/gas/msp430/pr22133.s: New test file.
* testsuite/gas/msp430/pr22133.d: New test driver.
* testsuite/gas/msp430/pr22133.s: Expected error output.
* testsuite/gas/msp430/msp430.exp: Run the new test.
Mark an ALLOC section, which should be placed in special memory area,
with SHF_GNU_MBIND. Its sh_info field indicates the special memory
type. GNU_MBIND section names start with ".mbind" so that they are
placed as orphan sections by linker. All input GNU_MBIND sections
with the same sh_type, sh_flags and sh_info are placed in one output
GNU_MBIND section. In executable and shared object, create a
GNU_MBIND segment for each GNU_MBIND section and its segment type is
PT_GNU_MBIND_LO plus the sh_info value. Each GNU_MBIND segment is
aligned at page boundary.
The assembler syntax:
.section .mbind.foo,"adx",%progbits
^ 0: Special memory type.
|
'd' for SHF_GNU_MBIND.
.section .mbind.foo,"adx",%progbits,0x1
^ 1: Special memory type.
|
'd' for SHF_GNU_MBIND.
.section .mbind.bar,"adG",%progbits,.foo_group,comdat,0x2
^ 2: Special memory type.
|
'd' for SHF_GNU_MBIND.
bfd/
* elf.c (get_program_header_size): Add a GNU_MBIND segment for
each GNU_MBIND section and align GNU_MBIND section to page size.
(_bfd_elf_map_sections_to_segments): Create a GNU_MBIND
segment for each GNU_MBIND section.
(_bfd_elf_init_private_section_data): Copy sh_info from input
for GNU_MBIND section.
binutils/
* NEWS: Mention support for ELF SHF_GNU_MBIND and
PT_GNU_MBIND_XXX.
* readelf.c (get_segment_type): Handle PT_GNU_MBIND_XXX.
(get_elf_section_flags): Handle SHF_GNU_MBIND.
(process_section_headers): Likewise.
* testsuite/binutils-all/mbind1.s: New file.
* testsuite/binutils-all/objcopy.exp: Run readelf test on
mbind1.s.
gas/
* NEWS: Mention support for ELF SHF_GNU_MBIND.
* config/obj-elf.c (section_match): New.
(get_section): Match both sh_info and group name.
(obj_elf_change_section): Add argument for sh_info. Pass both
sh_info and group name to get_section. Issue an error for
SHF_GNU_MBIND section without SHF_ALLOC. Set sh_info.
(obj_elf_parse_section_letters): Set SHF_GNU_MBIND for 'd'.
(obj_elf_section): Support SHF_GNU_MBIND section info.
* config/obj-elf.h (obj_elf_change_section): Add argument for
sh_info.
* config/tc-arm.c (start_unwind_section): Pass 0 as sh_info to
obj_elf_change_section.
* config/tc-ia64.c (obj_elf_vms_common): Likewise.
* config/tc-microblaze.c (microblaze_s_data): Likewise.
(microblaze_s_sdata): Likewise.
(microblaze_s_rdata): Likewise.
(microblaze_s_bss): Likewise.
* config/tc-mips.c (s_change_section): Likewise.
* config/tc-msp430.c (msp430_profiler): Likewise.
* config/tc-rx.c (parse_rx_section): Likewise.
* config/tc-tic6x.c (tic6x_start_unwind_section): Likewise.
* doc/as.texinfo: Document 'd' for SHF_GNU_MBIND.
* testsuite/gas/elf/elf.exp: Run section12a, section12b and
section13.
* testsuite/gas/elf/section10.d: Updated.
* testsuite/gas/elf/section10.s: Likewise.
* testsuite/gas/elf/section12.s: New file.
* testsuite/gas/elf/section12a.d: Likewise.
* testsuite/gas/elf/section12b.d: Likewise.
* testsuite/gas/elf/section13.l: Likewise.
* testsuite/gas/elf/section13.d: Likewise.
* testsuite/gas/elf/section13.s: Likewise.
include/
* elf/common.h (PT_GNU_MBIND_NUM): New.
(PT_GNU_MBIND_LO): Likewise.
(PT_GNU_MBIND_HI): Likewise.
(SHF_GNU_MBIND): Likewise.
ld/
* NEWS: Mention support for ELF SHF_GNU_MBIND and
PT_GNU_MBIND_XXX.
* emultempl/elf32.em (gld${EMULATION_NAME}_place_orphan): Place
input GNU_MBIND sections with the same type, attributes and
sh_info field into a single output GNU_MBIND section.
* testsuite/ld-elf/elf.exp: Run mbind2a and mbind2b.
* testsuite/ld-elf/mbind1.s: New file.
* testsuite/ld-elf/mbind1a.d: Likewise.
* testsuite/ld-elf/mbind1b.d: Likewise.
* testsuite/ld-elf/mbind1c.d: Likewise.
* testsuite/ld-elf/mbind2a.s: Likewise.
* testsuite/ld-elf/mbind2b.c: Likewise.
This patch syncs the generated data structure in tc-msp430.c with the
latest version of devices.csv released by TI.
My understanding is that the devices being removed were "invalid spins",
so can't be being used by anyone, and never will be. Current web
searches related to these devices return no relevant results.
Built and tested (no regressions) as follows:
Configured with: --target=msp430-elf --disable-gdb
Test variations:
msp430-sim/-mcpu=msp430
msp430-sim/-mcpu=msp430x
msp430-sim/-mcpu=msp430x/-mlarge/-mdata-region=either/-mcode-region=either
msp430-sim/-mhwmult=none
msp430-sim/-mhwmult=f5series
gas/
* config/tc-msp430.c (msp430_mcu_data): Sync with data from TI's
devices.csv file as of September 2016.
Defining linkrelax to have different values in as.c and tc-msp430.c /
tc-mn10300.c is at least rather tricky, and seems fragile, when we can just set
it in md_begin instead.
gas/ChangeLog:
2016-05-16 Trevor Saunders <tbsaunde+binutils@tbsaunde.org>
* config/tc-mn10300.c (md_begin): set linkrelax here instead of
defining it.
* config/tc-msp430.c (md_begin): Likewise.
* config/tc-msp430.c (msp430_operands): Check for a NOP preceding
an EINT instruction. Warn/fix as necessary.
* testsuite/gas/msp430/bad.s: Add test of EINT without preceding NOP.
* testsuite/gas/msp430/bad.l: Update expected messages.
various places either directly or indirectly set input_line_pointer to point at
a literal. Currently lots of places modify the string input_line_pointer
points at, so making it const isn't easy. Since most if not all of these
places assign to input_line_pointer to parse an expression it would probably be
best to add ways to generate and deal with expressions that doesn't involve
parsing strings, but for now adding some casts seems easiest.
gas/ChangeLog:
2016-03-31 Trevor Saunders <tbsaunde+binutils@tbsaunde.org>
* config/tc-i960.c (parse_expr): Cast to char * when assigning to
input_line_pointer.
* config/tc-m32r.c (expand_debug_syms): Likewise.
* config/tc-msp430.c (msp430_dstoperand): Likewise.
* config/tc-z80.c (md_begin): Likewise.
* stabs.c (stabs_generate_asm_func): Likewise.
PR target/19561
opcdoe * msp430-dis.c (print_insn_msp430): Add a special case for
decoding an RRC instruction with the ZC bit set in the extension
word.
include * opcode/msp430.h (IGNORE_CARRY_BIT): New define.
(RRUX): Synthesise using case 2 rather than 7.
gas * config/tc-msp430.c (msp430_operands): Remove case 7. Use case 2
to handle encoding of RRUX instruction.
* testsuite/gas/msp430/msp430x.s: Add more tests of the extended
shift instructions.
* testsuite/gas/msp430/msp430x.d: Update expected disassembly.
* config/tc-msp430.c (msp430_mcu_names): Rename to
msp430_mcu_data. Add fields for the ISA and hardware multiply
support. Update with information from the latest devices.csv
file.
(md_parse_option): Make use of the new array.
gas * config/tc-msp430.c (MAX_OP_LEN): Increase to 4096.
(msp430_make_init_symbols): New function.
(msp430_section): Call it.
(msp430_frob_section): Likewise.
ld * emulparams/msp430elf.sh (TEMPLATE_NAME): Change to msp430.
* scripttempl/msp430.sc (.text): Add .lower.text and .either.text.
(.data): Add .lower.data and .either.data.
(.bss): Add .lower.bss and .either.bss.
(.rodata): Add .lower.rodata and .either.rodata.
* emultempl/msp430.em: New file. Implements a new orphan
placement algorithm that divides sections between lower and upper
memory regions.
* Makefile.am (emsp430elf.c): Depend upon msp430.em.
*emsp430X.c): Likewise.
* Makefine.in: Regenerate.
gcc-5 correctly complains "loop exit may only be reached after
undefined behavior". I was going to correct this by checking the
index before dereferencing the array rather than the other way around,
but then I noticed it is possible for extract_cmd to write the
terminating zero one past the end of "cmd". Fixing that means no
index check is needed in md_assemble.
* config/tc-msp430.c (md_assemble): Correct size passed to
extract_cmd. Remove index check.
* config/tc-msp430.c (OPTION_WARN_INTR_NOPS): Use y instead of z.
(OPTION_NO_WARN_INTR_NOPS): Use Y instead of Z.
* doc/c-msp430.texi: Update command line option description.
* gas/msp430/bad.d: Use -my not -mz.
* config/tc-msp430.c (CHECK_RELOC_MSP430): Add OP parameter.
Generate BFD_RELOC_MSP430_ABS_HI16 if vshift is 1.
(msp430_srcoperand): Store vshift value in operand.
* msp430.h (struct msp430_operand_s): Add vshift field.
* gas/elf/struct.d: Expect extra output from some toolchains.
* gas/symver/symver0.d: Likewise.
* gas/symver/symver1.d: Likewise.
generate warning messages about an instruction that changes the interrupt
state not being followed by a NOP instruction.
* config/msp430/msp430.c: Replace known mcu array with known
msp430 ISA mcu name array.
Accept any name for -mmcu option.
Add -mz option to warn about missing NOP following an interrupt
status change.
(check_for_nop): New.
(msp430_operands): Emit a warning, if requested, when an interrupt
changing instruction is not followed by a NOP.
* doc/c-msp430.c: Document -mz option.
* gas/msp430/bad.d: Add -mz option.
* gas/msp430/bad.s: Add more cases where warnings should be
generated.
* gas/msp430/bad.l: Add expected warning messages.
For each object, if it has a nonempty .data or .bss section,
emit a symbol that could cause the startup code to selectively
link in the code to initialize those sections.
* config/tc-msp430.c (msp430_section): Always flag data sections,
regardless of -md.
(msp430_frob_section): New. Make sure all sections are noticed if
they have content.
(msp430_lcomm): New. Flag bss if .lcomm is seen.
(msp430_comm): New. Likewise.
(md_pseudo_table): Add them.
* config/tc-msp430.h (msp430_frob_section): Declare.
(tc_frob_section): Define.
New MSP430 MCU parts are being created by TI all the time and the
list is basically always out of date. Instead any name will be
accepted by the -mmcu= command line option. ISA selection is now
based upon the -mcpu= command line option, just as is done for GCC.
gas/ChangeLog
* config/tc-msp430.c (show_mcu_list): Delete.
(md_parse_option): Accept any MCU name. Accept several more
variants for the -mcpu option.
(md_show_usage): Do not call show_mcu_list.
* config/tc-msp430.c (msp430_refsym): New: ".refsym <symbol>"
* doc/c-msp430.texi (MSP430 Directives): Document it.
The purpose of this patch is to provide a way for one object file
to require the inclusion of another object, without having to
allocate space for a .word address reference.
(OPTION_INTR_NOPS): Define.
(gen_interrupt_nops): Default to FALSE.
(md_parse_opton): Add support for OPTION_INTR_NOPS.
(md_longopts): Add -mn.
(md_show_usage): Add -mn.
(msp430_operands): Generate NOPs for all MCUs not just 430Xv2.
* doc/c-msp430.c: Document -mn.
for "<foo>a". Issue error messages for unrecognised or corrrupt
size extensions.
* gas/msp430/bad.s: New test: Checks erroneous size extensions.
* gas/msp430/bad.d: New test command file.
* gas/msp430/bad.l: New file: Expected error messages.
* gas/msp430/msp430.exp: Run the new test.
* gas/msp430/msp430x.s: Add "<foo>.a" aliases of "<foo>a"
instructions.
* gas/msp430/msp430x.d: Update expected disassembly.
(move_data): New variable.
(md_parse_option): Parse -md.
(msp430_section): New function. Catch references to the .bss or
.data sections and generate a special symbol for use by the libcrt
library.
(md_pseudo_table): Intercept .section directives.
(md_longopt): Add -md
(md_show_usage): Likewise.
(msp430_operands): Generate a warning message if a NOP is inserted
into the instruction stream.
* doc/c-msp430.texi (node MSP430 Options): Document -md option.
Add -mcpu command to specify core type.
* doc/c-msp430.c: Update documentation.
* gas/msp430/opcodes.s: Use correct value for .arch pseudo.
* gas/msp430/msp430x.d: Use correct value for -mcpu option.
* config.bfd (msp430): Define targ_selvecs.
* configure.in: Add bfd_elf32_msp430_ti_vec.
* cpu-msp430.c: Add some more MSP430 machine numbers.
* elf32-msp430.c Add support for MSP430X relocations.
Add support for TI compiler generated relocations.
Add support for sym_diff relocations.
Add support for relaxing out of range short branches into long
branches.
Add support for MSP430 attribute section.
* reloc.c: Add MSP430X relocations.
* targets.c: Add bfd_elf32_msp430_ti_vec.
* bfd-in2.h: Regenerate.
* configure: Regenerate.
* libbfd.h: Regenerate.
* readelf.c: Add support for MSP430X architecture.
* readelf.exp: Expect -wi test to fail for the MSP430.
* config/tc-msp430.c: Add support for the MSP430X architecture.
Add code to insert a NOP instruction after any instruction that
might change the interrupt state.
Add support for the LARGE memory model.
Add code to initialise the .MSP430.attributes section.
* config/tc-msp430.h: Add support for the MSP430X architecture.
* doc/c-msp430.texi: Document the new -mL and -mN command line
options.
* NEWS: Mention support for the MSP430X architecture.
* gas/all/gas.exp: Skip the DIFF1 test for the MSP430.
Expect the FORWARD test to pass for the MSP430.
Skip the REDEF tests for the MSP430.
Expect the 930509A test to fail for the MSP430.
* gas/all/sleb128-4.d: Skip for the MSP430.
* gas/elf/elf.exp: Set target_machine to msp430 for the MSP430.
Skip the EHOPT0 test for the MSP430.
Skip the REDEF and EQU-RELOC tests for the MSP430.
* gas/elf/section2.e-msp430: New file.
* gas/lns/lns-big-delta.d: Remove expectation of 20-bit
addresses.
* gas/lns/lns.exp: Use alternate LNS COMMON test for the MSP430.
* gas/msp430/msp430x.s: New test.
* gas/msp430/msp430x.d: Expected disassembly.
* gas/msp430/msp430.exp: Run new test.
* gas/msp430/opcode.d: Update expected disassembly.
* msp430.h: Add MSP430X relocs.
Add some more MSP430 machine numbers.
Add values used by .MSP430.attributes section.
* msp430.h: Add patterns for MSP430X instructions.
* Makefile.am: Add emsp430X.c
* Makefine.in: Regenerate.
* configure.tgt (msp430): Add msp430X emulation.
* ldmain.c (multiple_definition): Only disable relaxation if it
was enabled by the user.
* ldmain.h (RELAXATION_ENABLED_BY_USER): New macro.
* emulparams/msp430all.sh: Add support for MSP430X.
* emultempl/generic.em: (before_parse): Enable relaxation for the
MSP430.
* scripttempl/msp430.sc: Reorganize sections. Add .rodata
section.
* scripttempl/msp430_3.sc: Likewise.
* NEWS: Mention support for MSP430X.
* ld-elf/flags1.d: Expect this test to pass on the MSP430.
* ld-elf/init-fini-arrays.d: Expect this test to fail on the
MSP430.
* ld-elf/merge.d: Expect this test to pass on the MSP430.
* ld-elf/sec64k.exp: Skip these tests for the MSP430.
* ld-gc/pr13683.d: Expect this test to fail on the MSP430.
* ld-srec/srec.exp: Expect these tests to fail on the MSP430.
* ld-undefined/undefined.exp: Expect the UNDEFINED LINE test to
fail on the MSP430.
* msp430-dis.c: Add support for MSP430X instructions.