Assert size of elf_x86_64_bnd_plt2_entry and elf_x86_64_legacy_plt2_entry
only in elf_x86_64_check_relocs.
* elf64-x86-64.c (elf_x86_64_check_relocs): Assert size of
elf_x86_64_bnd_plt2_entry and elf_x86_64_legacy_plt2_entry.
(elf_x86_64_allocate_dynrelocs): Don't assert size of
elf_x86_64_bnd_plt2_entry and elf_x86_64_legacy_plt2_entry.
Displacement of branch to PLT0 in x86-64 PLT entry is signed 32-bit.
This patch adds a sanity check. We will only see the failure when PLT
size is > 2GB.
* elf64-x86-64.c (elf_x86_64_finish_dynamic_symbol): Check
branch displacement overflow in PLT entry.
PR binutils/17512
* dwarf.c (get_encoded_value): Check for an encoded size of 0.
(display_debug_lines_raw): Check for an invalid line range value.
(display_debug_frames): Check for corrupt augmentation data.
* coffgen.c (coff_get_normalized_symtab): Check for an excessive
number of auxillary entries.
* ieee.c (next_byte): Convert to a function. Return FALSE if the
next byte is beyond the end of the buffer.
(parse_int): Test the return value of next_byte.
(parse_expression): Convert to boolean. Return FALSE if the
parsing failed. Test the return value of next_byte.
(ieee_seek): Convert to a function. Return FALSE if the seek goes
beyond the end of the buffer.
(ieee_slurp_external_symbols): Test the return value of ieee_seek
and next_byte.
(ieee_slurp_sections): Convert to boolean. Return FALSE if the
operation failed. Test the return value of ieee_seek and
next_byte.
(ieee_archive_p): Test the return value of ieee_seek and
next_byte.
(do_one): Likewise.
(ieee_slurp_section_data): Likewise.
(ieee_object_p): Likewise. Store the size of the buffer in the
total_amt field in the header.
* libieee.h (common_header_type): Add amt field.
* mach-o.c (bfd_mach_o_canonicalize_one_reloc): Check that the
reloc's value is within range.
(bfd_mach_o_read_symtab_symbols): Nullify the symbols field if the
operation fails.
* pei-x86_64.c (pex64_xdata_print_uwd_codes): Replace abort with
an error message.
(pex64_dump_xdata): Check for buffer overflows.
* versados.c (process_otr): Check that the section exists before
taking its size.
(versados_object_p): Make sure that enough data was read for the
header to be checked.
* vms-alpha.c (vms_get_remaining_object_record): Change
read_so_far parameter to an unsigned int. Check that the amount
read is in range.
Corrects overflow test for rel14, addr14, rel24, addr24 branch relocs,
and prints an information message to give a hint as to how a branch
that can't reach a stub might be cured.
bfd/
* elf64-ppc.c (group_sections): Init stub14_group_size from
--stub-group-size parameter divided by 1024.
gold/
* powerpc.cc (Stub_control::Stub_control): Init stub14_group_size_
from --stub-group-size parameter divided by 1024.
(Powerpc_relocate_functions::rela, rela_ua): Add fieldsize
template parameter. Update all uses.
(Target_powerpc::Relocate::relocate): Rename has_plt_value to
has_stub_value. Set for long branches. Don't report overflow for
branch to undefined weak symbols. Print info message on
overflowing branch to stub.
Go is multi-threaded, so use thread-safe plt stubs. __go_go doesn't
actually start threads, but is a convenient libgo function with a
reasonably unique name that is called by all Go executables. (Threads
are started by a static function of libgo, runtime_newosproc, called
by a whole lot of global functions, including runtime_starttheworld
and runtime_main.)
bfd/
* elf64-ppc.c (ppc64_elf_size_stubs): Add __go_go to thread_starters.
gold/
* powerpc.cc (Target_powerpc::do_relax): Add __go_go to thread_starters.
PR binutils/17512
* peXXIgen.c (pe_print_pdata): Fail if the section's virtual size
is larger than its real size.
(rsrc_print_section): Fix off-by-one error checking for overflow.
* pei-x86_64.c (pex64_bfd_print_pdata): Handle empty unwind
sections.
* dwarf.c (get_encoded_value): Warn and return if the encoded
value is more than 64-bits long.
(SAFE_BYTE_GET): Do not attempt to read more than 64-bits.
(process_extended_line_op): Add more range checks.
(decode_location_expression): Use the return value from
display_block. Add more range checks.
(read_debug_line_header): Add range check.
(display_debug_lines_raw): Add range checks.
(display_debug_frames): Silently skip multiple zero terminators.
Add range checks.
(process_cu_tu_index): Check for non-existant or empty sections.
Use SAFE_BYTE_GET instead of byte_get.
PR binutils/17512
* dwarf.c (get_encoded_value): Add an 'end' parameter. Change the
'data' parameter to a double pointer and return the updated value.
(decode_location_expression): Update call to get_encoded_value.
(frame_need_space): Handle the case where one or both of the
mallocs fails.
(read_cie): Initialise the cie pointer, even if the read fails.
(display_debug_frames): Warn if the calculated block_end is before
the start of the block. Break the loop if the CIE could not be
read. Update call to get_encoded_value. Warn if the read CFA
expressions are too big.
* ieee.c (ieee_archive_p) Skip processing if no bytes are read at
all.
(ieee_object_p): Likewise.
PR binutils/17512
* dwarf.c (read_and_display_attr_value): Check that we do not read
past end.
(display_debug_pubnames_worker): Add range checks.
(process_debug_info): Check for invalid pointer sizes.
(display_loc_list): Likewise.
(display_loc_list_dwo): Likewise.
(display_debug_ranges): Likewise.
(display_debug_aranges): Check for invalid address size.
(read_cie): Add range checks. Replace call strchr with while loop.
* objdump.c (dump_dwarf): Replace abort with a warning message.
(print_section_stabs): Improve range checks.
* rdcoff.c (coff_get_slot): Use long for indx parameter type.
Add check for an excesively large index.
* rddbg.c (read_section_stabs_debugging_info): Zero terminate the
string table. Avoid walking off the end of the stabs data.
* stabs.c (parse_stab_string): Add check for a NULL name.
PR binutils/17512
* coffcode.h (coff_slurp_line_table): Set the line number of
corrupt entries to -1.
(coff_slurp_symbol_table): Alway initialise the value of the
symbol.
* coffgen.c (coff_print_symbol): Check that the combined pointer
is valid.
(coff_print_symbol): Do not print negative line numbers.
* peXXigen.c (pe_print_idata): Add range checking displaying
member names.
PR binutils/17512
* coffcode.h (coff_slurp_line_table): Initialise the parts of the
line number cache that would not be initialised by the copy from
the new line number table.
(coff_classify_symbol): Allow for _bfd_coff_internal_syment_name
returning NULL.
* coffgen.c (coff_get_normalized_symbols): Get the external
symbols before allocating space for the internal symbols, in case
the get fails.
* elf.c (_bfd_elf_slurp_version_tables): Only allocate a verref
array if one is needed. Likewise with the verdef array.
* peXXigen.c (_bfd_XXi_swap_sym_in): Replace abort()'s with error
messages.
(_bfd_XXi_swap_aux_in): Make sure that all fields of the aux
structure are initialised.
(pe_print_edata): Avoid reading off the end of the data buffer.
I missed this use of the loop induction variable outside the loop.
PR binutils/17512
* coffcode.h (coff_slurp_line_table): Use updated lineno_count
when building func_table.
bfd_zalloc/bfd_zmalloc to fix uninitialized memory reads is too big a
hammer, when the size allocated depends on user input. A typical
bfd_alloc, bfd_seek, bfd_bread sequence will give an error or warning
at the point the file read fails when some enormous item as described
by headers is not actually present in the file. Nice operating system
allow memory overcommit. But not if you write to the memory. So
bfd_zalloc can cause an OOM, thrashing, or system hangs.
The patch also fixes a recently introduced endless loop on bad input.
PR binutils/17512
* coffcode.h (coff_slurp_line_table): Don't bfd_zalloc, just
memset the particular bits we need. Update src after hitting loop
"continue". Don't count lineno omitted due to invalid symbols in
nbr_func, and update lineno_count. Init entire terminating
lineno. Don't both allocating terminator in n_lineno_cache.
Redirect sym->lineno pointer to where n_lineno_cache will be
copied, and free n_lineno_cache.
* pe-mips.c (NUM_HOWTOS): Typo fix.
Turning on .eh_frame processing for ld -r resulted in systemtap
tickling a ld bug. Triggered by the zero terminator not being added
to .eh_frame in a separate file as it usually is (crtend.o), but
instead being present in the last .eh_frame section along with CIEs
and FDEs. The 4-byte terminator makes the section size check fail
on 64-bit targets.
* elf-eh-frame (_bfd_elf_write_section_eh_frame): Adjust section
size check to account for possible zero terminator.
when displaying the contents of corrupt files.
PR binutils/17521
* coff-i386.c (NUM_HOWTOS): New define.
(RTYPE2HOWTO): Use it.
(coff_i386_rtype_to_howto): Likewise.
(coff_i386_reloc_name_lookup): Likewise.
(CALC_ADDEND): Check that reloc r_type field is valid.
* coff-x86_64.c (NUM_HOWTOS): New define.
(RTYPE2HOWTO): Use it.
(coff_amd64_rtype_to_howto): Likewise.
(coff_amd64_reloc_name_lookup): Likewise.
(CALC_ADDEND): Check that reloc r_type field is valid.
* coffcode.h (coff_slurp_line_table): Check for symbol table
indexing underflow.
(coff_slurp_symbol_table): Use zalloc to ensure that all table
entries are initialised.
* coffgen.c (_bfd_coff_read_string_table): Initialise unused bits
in the string table. Also ensure that the table is 0 terminated.
(coff_get_normalized_symtab): Check for symbol table indexing
underflow.
* opncls.c (bfd_alloc): Catch the case where a small negative size
can result in only 1 byte being allocated.
(bfd_alloc2): Use bfd_alloc.
* pe-mips.c (NUM_HOWTOS): New define.
(coff_mips_reloc_name_lookup): Use it.
(CALC_ADDEND): Check that reloc r_type field is valid.
* peXXigen.c (_bfd_XXi_swap_aouthdr_in): Initialise unused entries
in the DataDirectory.
(pe_print_idata): Avoid reading beyond the end of the data block
wen printing strings.
(pe_print_edata): Likewise.
Check for table indexing underflow.
* peicode.h (pe_mkobject): Initialise the pe_opthdr field.
(pe_bfd_object_p): Allocate and initialize enough space to hold a
PEAOUTHDR, even if the opt_hdr field specified less.
Structions with R_X86_64_GOTTPOFF relocation must be encoded with REX
prefix even if it isn't required by destination register. Otherwise
linker can't safely perform IE -> LE optimization.
bfd/
PR ld/17482
* elf64-x86-64.c (elf_x86_64_relocate_section): Update comments
for IE->LE transition.
gas/
PR ld/17482
* config/tc-i386.c (output_insn): Add a dummy REX_OPCODE prefix
for structions with R_X86_64_GOTTPOFF relocation for x32 if needed.
gas/testsuite/
PR ld/17482
* gas/i386/ilp32/x32-tls.d: New file.
* gas/i386/ilp32/x32-tls.s: Likewise.
ld/testsuite/
PR ld/17482
* ld-x86-64/tlsie4.dd: Updated.
Dramatically reduces memory consumption and processing time for large
all-zero data segments. Allows multiple symbol types attached to a
given segment to survive objcopy.
* tekhex.c (CHUNK_SPAN): Define.
(struct data_struct <chunk_init>): Use one byte per span, update
all code accessing this field.
(find_chunk): Add create param, don't create new entry unless set.
(insert_byte): Don't save zeros.
(first_phase): Set section SEC_CODE or SEC_DATA flag depending
on symbol type. Create an alternate section if both types of
symbol are given. Attach type '2' and '6' symbols to absolute
section.
(move_section_contents): Fix caching of chunk. Don't create chunk
when reading, or for writing zeros.
(tekhex_set_section_contents): Don't create initial chunks.
(tekhex_write_object_contents): Use CHUNK_SPAN.
Save a multiplication, and any concern that the buffer allocation
might be smaller than the amount read (as it could be if the header
size isn't a multiple of EXTERNAL_NLIST_SIZE).
* aoutx.h (aout_get_external_symbols): Tidy allocation of symbol buffer.
Handle the case of a zero length section or sub-section in
_bfd_elf_parse_attributes and in doing so prevent an infinite loop
in the parser.
bfd/ChangeLog:
2014-11-06 Will Newton <will.newton@linaro.org>
* elf-attrs.c (_bfd_elf_parse_attributes): Handle zero
length sections and sub-sections.
PR binutils/17512
* coffcode.h (handle_COMDAT): Replace abort with BFD_ASSERT.
Replace another abort with an error message.
(coff_slurp_line_table): Add more range checking.
* peXXigen.c (pe_print_debugdata): Add range checking.
bfd/
* elfxx-mips.c (update_mips_abiflags_isa): Add E_MIPS_ARCH_32R6
and E_MIPS_ARCH_64R6 support.
ld/testsuite/
* ld-mips-elf/abiflags-strip10-ph.d: New file.
* ld-mips-elf/mips-eld.exp: Run the new test.
gas/
* config/tc-mips.c (mips_elf_final_processing): Add INSN_ISA32R6
and INSN_ISA64R6 support.
gas/testsuite/
* gas/mips/elf_arch_mips32r6.d: New file.
* gas/mips/elf_arch_mips64r6.d: New file.
* gas/mips/mips.exp: Run the new tests.
PR binutils/17512
* coffcode.h (coff_set_alignment_hook): Warn if the file lies
about the number of relocations it contains.
(coff_sort_func_alent): Return 0 if the pointers are NULL.
(coff_slurp_line_table): Add more range checks. Do not free new
tables created when sorting line numbers.
* peXXigen.c (pe_print_idata): Add range checks.
(pe_print_edata): Likewise.
(rsrc_print_resource_entries): Likewise. Avoid printing control
characters. Terminate priniting if corruption is detected.
(rsrc_print_resource_directory): Terminate printing if an unknown
directory type is encountered.
(pe_print_debugdata): Fix off-by-one error.
(rsrc_count_entries): Add range checking.
(rsrc_parse_entry): Likewise.
as corrupt by the new error checking code in bfd_get_full_section_contents.
PR binutils/17512
* compress.c (bfd_get_full_section_contents): Improve test for
linker created objects.
Commit f54498b4 broke spu-elf, specifically the change "Do not try to
load a string table bigger than the file", because bfd_get_size
returns zero for the spu built-in overlay manager bfd.
* elf32-spu.c (ovl_mgr_stat): New function.
(spu_elf_open_builtin_lib): Pass to bfd_openr_iovec.
When performing linker relaxation, reduce the size of symbols that span
the deleted bytes. This ensures that, for example, function symbols
will have the correct size.
bfd/ChangeLog:
* elf32-avr.c (elf32_avr_relax_delete_bytes): During linker
relaxation, reduce the size of symbols that span the deleted
bytes.
ld/ChangeLog:
* testsuite/ld-avr/relax-02.d: Update to check size of symbols has
changed.
* testsuite/ld-avr/relax-03.d: Likewise.
Symbols at the very end of a section were not being updated correctly
when linker relaxation takes place due to the use of '<' instead of
'<='. Added a couple of tests to cover this behaviour.
bfd/ChangeLog:
* elf32-avr.c (elf32_avr_relax_delete_bytes): Modify symbols
located at the very end of the section.
ld/ChangeLog:
* ld/testsuite/ld-avr/relax-02.d: New file.
* ld/testsuite/ld-avr/relax-02.s: New file.
* ld/testsuite/ld-avr/relax-03.d: New file.
* ld/testsuite/ld-avr/relax-03.s: New file.
PR binutils/17512
* objdump.c (slurp_symtab): Fail gracefully if the table could not
be read.
(dump_relocs_in_section): Likewise.
* aoutx.h (slurp_symbol_table): Check that computed table size is
not bigger than the file from which is it being read.
(slurp_reloc_table): Likewise.
* coffcode.h (coff_slurp_line_table): Remove unneeded local
'warned'. Do not try to print the details of a symbol with an
invalid index.
* coffgen.c (make_a_sectiobn_from_file): Check computed string
index against length of string table.
(bfd_coff_internal_syment_name): Check read in string offset
against length of string table.
(build_debug_section): Return a pointer to the section used.
(_bfd_coff_read_string_table): Store the length of the string
table in the coff_tdata structure.
(bfd_coff_free_symbols): Set the length of the string table to
zero when it is freed.
(coff_get_normalized_symtab): Check offsets against string table
or data table lengths as appropriate.
* cofflink.c (_bfd_coff_link_input_bfd): Check offset against
length of string table.
* compress.c (bfd_get_full_section_contents): Check computed size
against the size of the file.
* libcoff-in.h (obj_coff_strings_len): Define.
(struct coff_tdata): Add strings_len field.
* libcoff.h: Regenerate.
* peXXigen.c (pe_print_debugdata): Do not attempt to print the
data if the debug section is too small.
* xcofflink.c (xcoff_link_input_bfd): Check offset against
length of string table.
binutils:
2014-10-31 Andrew Pinski <apinski@cavium.com>
Naveen H.S <Naveen.Hurugalawadi@caviumnetworks.com>
* readelf.c (print_mips_isa_ext): Print the value of Octeon3.
gas:
2014-10-31 Andrew Pinski <apinski@cavium.com>
Naveen H.S <Naveen.Hurugalawadi@caviumnetworks.com>
* config/tc-mips.c (CPU_IS_OCTEON): Handle CPU_OCTEON3.
(mips_cpu_info_table): Octeon3 enables virt ase.
* doc/c-mips.texi: Document octeon3 as an acceptable value for
-march=.
gas/testsuite:
2014-10-31 Andrew Pinski <apinski@cavium.com>
Naveen H.S <Naveen.Hurugalawadi@caviumnetworks.com>
* gas/mips/mips.exp: Add support for Octeon3 architecture.
Also add in support for running Octeon3 tests.
* gas/mips/octeon3.d: New test.
* gas/mips/octeon3.s: New test source.
opcodes:
2014-10-31 Andrew Pinski <apinski@cavium.com>
Naveen H.S <Naveen.Hurugalawadi@caviumnetworks.com>
* mips-dis.c (mips_arch_choices): Add octeon3.
* mips-opc.c (IOCT): Include INSN_OCTEON3.
(IOCT2): Likewise.
(IOCT3): New define.
(IVIRT): New define.
(mips_builtin_opcodes): Add dmfgc0, dmtgc0, hypcall, mfgc0, mtgc0,
tlbinv, tlbinvf, tlbgr, tlbgwi, tlbginv, tlbginvf, tlbgwr, tlbgp, tlti
IVIRT instructions.
Extend mtm0, mtm1, mtm2, mtp0, mtp1, mtp2 instructions to take another
operand for IOCT3.
bfd:
2014-10-31 Andrew Pinski <apinski@cavium.com>
Naveen H.S <Naveen.Hurugalawadi@caviumnetworks.com>
* archures.c: Add octeon3 for mips target.
* bfd-in2.h: Regenerate.
* bfd/cpu-mips.c: Define I_mipsocteon3.
nfo_struct): Add octeon3 support.
* bfd/elfxx-mips.c: (_bfd_elf_mips_mach): Add support for
octeon3.
(mips_set_isa_flags): Add support for octeon3.
(bfd_mips_isa_ext): Add bfd_mach_mips_octeon3.
(mips_mach_extensions): Make bfd_mach_mips_octeon3 an
extension of bfd_mach_mips_octeon2.
(print_mips_isa_ext): Print the value of Octeon3.
PR binutils/17512
* coffgen.c (_bfd_coff_get_external_symbols): Do not try to load a
symbol table bigger than the file.
* elf.c (bfd_elf_get_str_section): Do not try to load a string
table bigger than the file.
* readelf.c (process_program_headers): Avoid memory exhaustion due
to corrupt values in a dynamis segment header.
(get_32bit_elf_symbols): Do not attempt to read an over-large
section.
(get_64bit_elf_symbols): Likewise.
PR binutils/17512
* elf.c (bfd_section_from_shdr): Allocate and free the recursion
detection table on a per-bfd basis.
* peXXigen.c (pe_print_edata): Handle binaries with a truncated
export table.
and potential secuiryt breach.
PR binutils/17510
* srec.c (srec_bad_byte): Increase size of buf to allow for
negative values.
(srec_scan): Use an unsigned char buffer to hold header bytes.
presented with corrupt binaries.
PR binutils/17512
* elf.c (bfd_section_from_shdr): Detect and warn about ELF
binaries with a group of sections linked by the string table
indicies.
* peXXigen.c (pe_print_edata): Detect out of range rvas and
entry counts for the Export Address table, Name Pointer table
and Ordinal table.
executable with an invalid value in the NumberOfRvaAndSizes field of the
AOUT header.
PR binutils/17512
* peXXigen.c (_bfd_XXi_swap_aouthdr_in): Handle corrupt binaries
with an invalid value for NumberOfRvaAndSizes.
the bfd library to parse binaries containing maliciously corrupt section
group headers.
PR binutils/17510
* elf.c (setup_group): Improve handling of corrupt group
sections.
2014-10-22 Tejas Belagod <tejas.belagod@arm.com>
bfd/
* bfd-in.h (bfd_elf64_aarch64_set_options): Add a parameter.
* bfd-in2.h (bfd_elf64_aarch64_set_options): Likewise.
* elfnn-aarch64.c (aarch64_erratum_835769_stub): New.
(elf_aarch64_stub_type): Add new type
aarch64_stub_erratum_835769_veneer.
(elf_aarch64_stub_hash_entry): New fields for erratum 835769.
(aarch64_erratum_835769_fix): New data struct to record erratum
835769.
(elf_aarch64_link_hash_table: Global flags for 835769.
(aarch64_build_one_stub): Add case for 835769.
(aarch64_size_one_stub): Likewise.
(aarch64_mem_op_p, aarch64_mlxl_p,
aarch64_erratum_sequence,erratum_835769_scan):
New. Decode and scan functions for erratum 835769.
(elf_aarch64_create_or_find_stub_sec): New.
(elfNN_aarch64_size_stubs): Look for erratum 835769 and record
them.
(bfd_elfNN_aarch64_set_options: Set global flag for 835769.
(erratum_835769_branch_to_stub_data,
make_branch_to_erratum_835769_stub):New. Connect up all the
erratum stubs to occurances by branches.
(elfNN_aarch64_write_section): New hook.
(aarch64_map_one_stub): Output erratum stub symbol.
(elfNN_aarch64_size_dynamic_sections): Init mapping symbol
information for erratum 835769.
(elf_backend_write_section): Define.
ld/
* emultempl/aarch64elf.em: Add command-line option for erratum
835769.
ld/testsuite/
* ld-aarch64/aarch64-elf.exp (aarch64elftests): Drive erratum
835769 tests.
* ld-aarch64/erratum835769.d: New.
* ld-aarch64/erratum835769.s: New.
elf32_arm_plt0_size and elf32_arm_plt_size read instructions
to determine what is size of PLT entry. However it does not
read instruction correctly in case of ARM big endian V7 case.
In this case instructions are still kept in little endian
order (BE8).
* elf32-arm.c (read_code32): New function to read 32 bit
arm instruction.
(read_code16): New function to read 16 bit thumb instrution.
(elf32_arm_plt0_size, elf32_arm_plt_size): Use read_code32
and read_code16 to read instructions.
bfd/
* elfxx-mips.c (print_mips_ases): Print unknown ASEs.
(print_mips_isa_ext): Print the value of an unknown extension.
binutils/
* readelf.c (print_mips_ases): Print unknown ASEs.
(print_mips_isa_ext): Print the value of an unknown extension.
include/
* elf/mips.h (AFL_ASE_MASK): Define.
The code in ppc64_elf_tls_optimize looking at the .toc is only
interested in .toc entries that are addresses. .toc can contain more
than just an array of addresses, so if we have items that aren't
8-byte aligned, ignore them.
* elf64-ppc.c (ppc64_elf_tls_optimize): Ignore relocs against toc
entries that aren't a multiple of 8 rather than failing assertion.
powerpc64 ld builds plt call stubs with a read barrier to provide
thread safety on lazy plt updates, necessary on multi-threaded apps
with power7 or later weakly ordered memory. gcc-4.9 libgomp
introduced more functions that could call pthread_create, which means
we have more functions that if referenced in an executable should
cause a default of --plt-thread-safe.
* elf64-ppc.c (ppc64_elf_size_stubs): Add gcc-4.9 libgomp functions
to thread_starter.
When functions are emitted in comdat groups, global symbols defined in
duplicates of the group are treated as if they were undefined. That
prevents the symbols in the discarded sections from affecting the
linker's global symbol hash table or causing duplicate symbol errors.
Annoyingly, when gcc emits a function to a comdat group, it does not
put *all* of a function's code and data in the comdat group.
Typically, constant tables, exception handling info, and debug info
are emitted to normal sections outside of the group, which is a
perennial source of linker problems due to the special handling needed
to deal with the extra-group pieces that ought to be discarded. In
the case of powerpc64-gcc, the OPD entry for a function is not put in
the group. Since the function symbol is defined on the OPD entry this
means we need to handle symbols in .opd specially.
To see how this affects LTO in particular, consider the linker
testcase PR ld/12942 (1). This testcase links an LTO object file
pr12942a.o with a normal (non-LTO) object pr12942b.o. Both objects
contain a definition for _Z4testv in a comdat group. On loading
pr12942a.o, the linker sees a comdat group (actually linkonce section)
for _Z4testv and a weak _Z4testv defined in the IR. On loading
pr12942b.o, the linker sees the same comdat group, and thus discards
it. However, _Z4testv is a weak symbol defined in .opd, not part of
the group, so this weak symbol overrides the weak IR symbol. On
(re)loading the LTO version of pr12942a.o, the linker sees another
weak _Z4testv, but this one does not override the value we have from
pr12942b.o. The result is a linker complaint about "`_Z4testv'
... defined in discarded section `.group' of tmpdir/pr12942b.o".
* elf64-ppc.c (ppc64_elf_add_symbol_hook): If function code
section for function symbols defined in .opd is discarded, let
the symbol appear to be undefined.
(opd_entry_value): Ensure the result section is that for the
function code section in the same object as the OPD entry.
For binary ouput, we don't have an ELF bfd output so can't access
elf_elfheader. The elf64-ppc.c changes are really just a tidy,
triggered by looking at all places where the abiversion bits are
accessed.
bfd/
* elf64-ppc.c (ppc64_elf_before_check_relocs): Do .opd processing
even when output is not ppc64 ELF. Remove redundant tests on
type of input bfd.
ld/
PR 17488
* emultempl/ppc64elf.em (gld${EMULATION_NAME}_finish): Don't attempt
to access ELF header e_flags when not ppc64 ELF output.
The idea here is to drop .eh_frame FDEs corresponding to dropped
comdat group sections or linkonce sections, but not perform changes in
encoding.
bfd/
PR 17467
* elf-eh-frame.c (ENSURE_NO_RELOCS): Don't stop at first NONE reloc.
(_bfd_elf_parse_eh_frame): When relocatable output, don't set
flags enabling conversion of CIEs and FDEs to use relative encoding.
(find_merged_cie): Similarly.
(_bfd_elf_write_section_eh_frame): Don't edit FDEs when
relocatable, except for CIE pointer.
* elflink.c (bfd_elf_reloc_symbol_deleted_p): Return true for
relocs against symbols in dropped comdat group sections.
(bfd_elf_discard_info): Do some eh_frame optimisation when
relocatable.
ld/
* ldlang.c (lang_add_section): Set up map_head.s and map_tail.s when
relocatable.
These are useless because they can't match any address. In fact,
worse than useless because the .eh_frame_hdr lookup table matching
addresses to FDEs does not contain information about the FDE range.
The table is sorted by address; Range is inferred by the address
delta from one entry to the next. So if a zero address range FDE is
followed by a normal non-zero range FDE for the same address,
everything is good. However, the qsort could just as easily sort the
FDEs in the other order, in which case the normal FDE would
effectively be seen to have a zero range.
bfd/
PR 17447
* elf-bfd.h (struct eh_cie_fde): Comment re NULL u.fde.cie_inf.
* elf-eh-frame.c (_bfd_elf_parse_eh_frame): Mark zero address
range FDEs for discarding.
(vma_compare): Sort on range after address.
(_bfd_elf_gc_mark_fdes): Test for NULL u.fde.cie_inf.
(_bfd_elf_discard_section_eh_frame): Likewise. Write "FDE" in
error message rather than "fde".
(_bfd_elf_write_section_eh_frame_hdr): Write "PC" and "FDE" in
error message.
ld/testsuite/
* ld-elf/eh1.s: Don't create FDEs with zero address ranges.
* ld-elf/eh3.s: Likewise.
* ld-elf/eh1.d, * ld-elf/eh2.d, * ld-elf/eh3.d: Adjust.
* ld-mips-elf/eh-frame1-n32.d: Warning match update.
* ld-mips-elf/eh-frame1-n64.d: Likewise.
* ld-mips-elf/eh-frame2-n32.d: Likewise.
* ld-mips-elf/eh-frame2-n64.d: Likewise.
ar, nm and ranlib currently lack the ability to handle more than one
plugin in lib/bfd-plugins. This patch reshuffles the logic in plugin.c
to add this functionality. One can now place both llvm and gcc plugins
in this directory and have them loaded automatically.
Mixed gcc/llvm archives are also supported (but not very useful until
ld.bfd and ld.gold also would load multiple plugins and use them to
claim different object files).
PR 17422
* plugin.c (try_claim): New function. Moved from
bfd_plugin_object_p.
(try_load_plugin): Pass through bfd. Add test.
(load_plugin): Pass through bfd.
(bfd_plugin_object_p): Move logic to try_claim.
During link-time relaxation distance between cross-section call site and
its target may grow, producing 'call target out of range' error for
relaxed calls. Be more conservative when calculating whether or not a
callx can be converted to a straight call.
2014-09-23 Sterling Augustine <augustine.sterling@gmail.com>
bfd/
* elf32-xtensa.c (is_resolvable_asm_expansion): for cross-section
call relaxation use furthermost addresses where call source and
destination can be to check whether it's in the range of a direct
call.
bfd:
2014-09-19 Andreas Krebbel <krebbel@linux.vnet.ibm.com>
* elf32-s390.c: Don't replace R_390_TLS_LE32 with R_390_TLS_TPOFF
for PIE.
* elf64-s390.c: Don't replace R_390_TLS_LE64 with R_390_TLS_TPOFF
for PIE.
since
5979d6b69bhttps://sourceware.org/git/?p=binutils-gdb.git;a=commitdiff;h=5979d6b69b20a8355ea94b75fad97415fce4788c
vdso handling
https://sourceware.org/ml/binutils/2014-03/msg00082.htmlhttps://sourceware.org/ml/binutils/2014-04/msg00003.html
Message-ID: <A78C989F6D9628469189715575E55B230AA884EB@IRSMSX104.ger.corp.intel.com>
I get on
kernel-3.16.2-200.fc20.x86_64
https://koji.fedoraproject.org/koji/buildinfo?buildID=575860
attaching its vdso.bin.gz
GDB (FSF HEAD 5e43d46791) regression:
reproducer:
./gdb -ex start ./gdb
actual result / FAIL:
Got object file from memory but can't read symbols: File truncated.
expected result / PASS:
<nothing>
or / PASS:
warning: Could not load shared library symbols for linux-vdso.so.1.
Do you need "set solib-search-path" or "set sysroot"?
That "warning: Could not load shared library..." is mostly harmless (it is
a bug in GDB), in the FAIL case it is not printed just because
bfd_check_format() fails there.
It seems logical to me this way when the 'size' parameter has been already
added.
Alan Modra:
I was wrongly thinking that the section headers were
always last when I wrote that code. (They are now! If you relink
that vdso with current binutils master you won't hit this problem, but
that of course doesn't help existing kernels.)
I do not see a regression for add-symbol-file-from-memory for libncurses.so.5
from the original thread above.
Start of section headers: 1080 (bytes into file)
Size of section headers: 64 (bytes)
Number of section headers: 13
Section header string table index: 8
Section Headers:
[Nr] Name Type Address Off Size ES Flg Lk Inf Al
[ 8] .fake_shstrtab STRTAB 0000000000000780 000780 000076 00 A 0 0 32
Program Headers:
Type Offset VirtAddr PhysAddr FileSiz MemSiz Flg Align
LOAD 0x000000 0x0000000000000000 0x0000000000000000 0x0012fe 0x0012fe R E 0x1000
size == 0x2000
shdr_end == 0x778 == 1080 + 13 * 64
high_offset == 0x12fe
else if (size >= shdr_end)
- high_offset = shdr_end;
+ high_offset = size;
But then 0x778 < 0x780 for "Section header string table index" so whole
bfd_check_format() fails because section headers were not cleared here:
/* If the segments visible in memory didn't include the section headers,
then clear them from the file header. */
if (high_offset < shdr_end)
bfd/ChangeLog
2014-09-18 Jan Kratochvil <jan.kratochvil@redhat.com>
PR gdb/17407
* elfcode.h (bfd_from_remote_memory): Use SIZE for HIGH_OFFSET.
different architecture tags. Add a test case to make sure that this works,
and update readelf so that it will not seg-fault when trying to display the
attributes of binaries with invalid architecture tags.
* elf32-arm.c (elf32_arm_merge_eabi_attributes): Return false if
failed to merge.
* ld-arm/attr-merge-arch-2.d: New test case.
* ld-arm/attr-merge-arch-2a.s: New test case source file.
* ld-arm/attr-merge-arch-2b.s: Likewise.
* ld-arm/arm-elf.exp: Run new test case.
* readelf.c (display_arm_attribute): Use unsigned int type for
tag, val and type variables.
Refactor each relaxation pattern to raise the maintainability.
In origin, all patterns is analysed in nds32_elf_relax_section,
so it is hard to debug and maintain. Therefore, we classify all
patterns into different functions in this patch.
Moreover, we adjust all optimizations into nds32_elf_relax_section
to take these optimizations in turn. This can promise all relaxation
being done after calling gld${EMULATION_NAME}_after_allocation.