This patch moves the gdb/gnulib subdirectory to the top level.
It adjusts the top-level build system to build gnulib when necessary,
and changes gdb to use this. However, gdbserver still builds its own
copy of gnulib, just from the new source location.
A small hack was needed to ensure that gnulib is only built when gdb
is enabled. The Makefile only provides an ordering -- the directory
must be mentioned in configdirs to actually be compiled at all.
Most of the patch is just a "git mv" of gnulib, though a few minor
path adjustments were needed in some files there.
Tested by the buildbot.
ChangeLog
2019-06-14 Tom Tromey <tom@tromey.com>
* MAINTAINERS: Add gnulib.
* gnulib: New directory, move from gdb/gnulib.
* configure.ac (host_libs): Add gnulib.
* configure: Rebuild.
* Makefile.def (host_modules, dependencies): Add gnulib.
* Makefile.in: Rebuild.
gdb/ChangeLog
2019-06-14 Tom Tromey <tom@tromey.com>
* gnulib: Move directory to top-level.
* configure.ac: Don't configure gnulib.
* configure: Rebuild.
* common/common-defs.h: Use new path to gnulib.
* Makefile.in (GNULIB_BUILDDIR): Now ../gnulib.
(GNULIB_H): Remove.
(INCGNU): Look in new gnulib location.
(HFILES_NO_SRCDIR): Remove gnulib files.
(SUBDIR, REQUIRED_SUBDIRS): Remove gnulib.
(generated_files): Remove GNULIB_H.
($(LIBGNU), all-lib): Remove targets.
(distclean): Don't mention GNULIB_BUILDDIR.
($(GNULIB_BUILDDIR)/Makefile): Remove target.
gdb/gdbserver/ChangeLog
2019-06-14 Tom Tromey <tom@tromey.com>
* configure.ac: Use new path to gnulib.
* configure: Rebuild.
* Makefile.in (INCGNU, $(GNULIB_BUILDDIR)/Makefile): Use new path
to gnulib.
gnulib/ChangeLog
2019-06-14 Tom Tromey <tom@tromey.com>
* update-gnulib.sh: Adjust paths.
* Makefile.in: Adjust paths.
* configure.ac: Adjust paths. Use ACX_LARGEFILE.
* configure: Rebuild.
When "common" becomes a library, linking will cause a symbol clash,
because "xmalloc" and some related symbols are defined in that
library, libiberty, and readline.
To work around this problem, this patch moves the clashing symbols to
a new file, which is then compiled separately for both gdb and
gdbserver.
gdb/ChangeLog
2019-06-11 Tom Tromey <tom@tromey.com>
* common/common-utils.c (xmalloc, xrealloc, xcalloc)
(xmalloc_failed): Move to alloc.c.
* alloc.c: New file.
* Makefile.in (COMMON_SFILES): Add alloc.c.
gdb/gdbserver/ChangeLog
2019-06-11 Tom Tromey <tom@tromey.com>
* Makefile.in (SFILES): Add alloc.c.
(OBS): Add alloc.o.
(IPA_OBJS): Add alloc-ipa.o.
(alloc-ipa.o): New target.
(%.o: ../%.c): New pattern rule.
ARI pointed out that a recent patch introduced a call to "warning"
with a string that ended in a newline:
https://sourceware.org/ml/gdb-patches/2019-06/msg00000.html
This is generally forbidden, I believe, because warning adds its own
newline.
This patch removes all of the trailing newlines I was able to find. I
searched for 'warning (.*\\n"' and then fixed the ones where the
newline appeared at the end of the string (some had internal
newlines).
Tested on x86-64 Fedora 29.
gdb/ChangeLog
2019-06-10 Tom Tromey <tromey@adacore.com>
* m32c-tdep.c (m32c_m16c_address_to_pointer): Don't end warning
with a newline.
* guile/guile.c (handle_boot_error): Don't end warning with a
newline.
* cli/cli-cmds.c (exit_status_set_internal_vars): Don't end
warning with a newline.
* s12z-tdep.c (s12z_skip_prologue): Don't end warning with a
newline.
(s12z_frame_cache): Likewise.
* dwarf-index-cache.c (index_cache::store): Don't end warning with
a newline.
* solib-svr4.c (disable_probes_interface): Don't end warning with
a newline.
* nat/fork-inferior.c (fork_inferior): Don't end warning with a
newline.
* python/python.c (do_finish_initialization): Don't end warning
with a newline.
gdb/gdbserver/ChangeLog
2019-06-10 Tom Tromey <tromey@adacore.com>
* remote-utils.c (look_up_one_symbol, relocate_instruction): Don't
end warning with a newline.
* linux-s390-low.c (s390_get_wordsize): Don't end warning with a
newline.
* thread-db.c (attach_thread): Don't end warning with a newline.
(thread_db_notice_clone): Likewise.
* tracepoint.c (gdb_agent_helper_thread): Don't end warning with a
newline.
* linux-x86-low.c (x86_get_min_fast_tracepoint_insn_len): Don't
end warning with a newline.
Adds an utility function to make it shorter to write the common case
of wrapping an xstrdup with a unique_xmalloc_ptr, and uses it
throughout.
Note: I tried to put this in common/common-utils.h near skip_spaces,
etc. but that is included in common/common-defs.h before
common/gdb_unique_ptr.h is included, so it would fail to compile
because gdb::unique_xmalloc_ptr isn't defined at that point yet. I
tried moving the gdb_unique_ptr.h inclusion before common-utils.h, but
that doesn't work because gdb_unique_ptr.h depends on common-utils.h
for xfree.
gdb/ChangeLog:
2019-06-04 Pedro Alves <palves@redhat.com>
* common/gdb_unique_ptr.h (make_unique_xstrdup): New.
* ada-lang.c (catch_ada_completer): Use make_unique_xstrdup.
* breakpoint.c (condition_completer): Likewise.
* cli/cli-dump.c (scan_expression): Likewise.
* common/filestuff.c (mkdir_recursive): Likewise.
* common/gdb_tilde_expand.c (gdb_tilde_expand_up)
* common/pathstuff.c (gdb_realpath, gdb_realpath_keepfile)
(gdb_abspath): Likewise.
* compile/compile-cplus-types.c
(compile_cplus_instance::decl_name): Likewise.
* completer.c (complete_explicit_location):
(signal_completer, reg_or_group_completer_1): Likewise.
* cp-support.c (cp_remove_params_if_any): Likewise.
* fbsd-tdep.c (fbsd_core_vnode_path): Likewise.
* guile/scm-safe-call.c (gdbscm_safe_eval_string): Likewise.
* infcmd.c (strip_bg_char): Likewise.
* linespec.c (copy_token_string): Likewise.
* mi/mi-main.c (output_cores): Likewise.
* psymtab.c (psymtab_search_name):
* symfile.c (test_set_ext_lang_command): Likewise.
* target.c (target_fileio_read_stralloc): Likewise.
* tui/tui-regs.c (tui_reggroup_completer): Likewise.
* value.c (complete_internalvar): Likewise.
gdb/gdbserver/ChangeLog:
2019-06-04 Pedro Alves <palves@redhat.com>
* server.c (captured_main): Use make_unique_xstrdup.
gdbreplay had its own implementation of fromhex. This patch changes
it to use the one in common/.
gdb/gdbserver/ChangeLog
2019-06-02 Tom Tromey <tom@tromey.com>
* gdbreplay.c (fromhex): Remove.
* Makefile.in (GDBREPLAY_OBS): Add rsp-low.o.
GCC 9 has a few new warnings that aren't enabled in the gdb build by
default: -Wdeprecated-copy, -Wdeprecated-copy-dtor, and
-Wredundant-move. This patch enables them all.
Tested by rebuilding with a new GCC (git master) on x86-64 Fedora 29.
gdb/ChangeLog
2019-05-29 Tom Tromey <tromey@adacore.com>
* inflow.c (struct terminal_info): Add default operator=.
* configure: Rebuild.
* warning.m4 (AM_GDB_WARNINGS): Add -Wdeprecated-copy,
-Wdeprecated-copy-dtor, -Wredundant-move.
gdb/gdbserver/ChangeLog
2019-05-29 Tom Tromey <tromey@adacore.com>
* configure: Rebuild.
This line of code...
*(int64_t *) ptr = *(int32_t *) ptr;
...in linux-x86-low.c is not needed (and does not work correctly)
within a 32-bit executable. I added an __x86_64__ ifdef (which is
used extensively elsewhere in the file for like purposes) to prevent
this code from being included in 32-bit builds.
It fixes the following regressions when running on native
i686-pc-linux-gnu:
FAIL: gdb.server/abspath.exp: continue to main
FAIL: gdb.server/connect-without-multi-process.exp: multiprocess=auto: continue to main
FAIL: gdb.server/connect-without-multi-process.exp: multiprocess=off: continue to main
FAIL: gdb.server/ext-restart.exp: restart: run to main
FAIL: gdb.server/ext-restart.exp: run to main
FAIL: gdb.server/ext-run.exp: continue to main
FAIL: gdb.server/ext-wrapper.exp: print d
FAIL: gdb.server/ext-wrapper.exp: restart: print d
FAIL: gdb.server/ext-wrapper.exp: restart: run to marker
FAIL: gdb.server/ext-wrapper.exp: run to marker
FAIL: gdb.server/no-thread-db.exp: continue to breakpoint: after tls assignment
FAIL: gdb.server/reconnect-ctrl-c.exp: first: stop with control-c
FAIL: gdb.server/reconnect-ctrl-c.exp: second: stop with control-c
FAIL: gdb.server/run-without-local-binary.exp: run test program until the end
FAIL: gdb.server/server-kill.exp: continue to breakpoint: after server_pid assignment
FAIL: gdb.server/server-kill.exp: tstatus
FAIL: gdb.server/server-run.exp: continue to main
gdb/gdbserver/ChangeLog:
* linux-x86-low.c (x86_fill_gregset): Don't compile 64-bit
sign extension code on 32-bit builds.
This changeset defines _WIN32_WINNT to at least 0x0501, the level
of Windows XP, unless defined to a higher level, in a single
place. It then removes all the overrides of _WIN32_WINNT in
individual files as no longer needed. Doing this also solves
compilation of windows-nat.c with mingw.org's MinGW, as that
file uses CONSOLE_FONT_INFO which needs the XP level to become
exposed in the Windows headers, while mingw.org defaults to
Windows 9X.
gdb/ChangeLog:
2019-05-03 Eli Zaretskii <eliz@gnu.org>
* common/common-defs.h [__MINGW32__ || __CYGWIN__]: Define
_WIN32_WINNT to the XP level, unless already defined to a higher
level.
* unittests/parse-connection-spec-selftests.c:
* ser-tcp.c:
* common/netstuff.c [USE_WIN32API]: Remove the _WIN32_WINNT
override.
gdb/gdbserver/ChangeLog:
2019-05-03 Eli Zaretskii <eliz@gnu.org>
* remote-utils.c:
* gdbreplay.c [USE_WIN32API]: Remove the _WIN32_WINNT override.
All debug output needs to go via debug functions to ensure it writes to the
correct output stream.
gdb/ChangeLog:
* nat/linux-waitpid.c (linux_debug): Call debug_vprintf.
gdb/gdbserver/ChangeLog:
* ax.c (ax_vdebug): Call debug_printf.
* debug.c (debug_write): New function.
* debug.h (debug_write): New declaration.
* linux-low.c (sigchld_handler): Call debug_write.
A comment in debug.h (written in 2014) states: "We declare debug format
variables here, and debug_threads but no other debug content variables
(e.g., not remote_debug) because while this file is not currently used by
IPA it may be some day, and IPA may have its own set of debug content
variables".
This has resulted in remote_debug being declared in many .c/.h files
throughout gdbserver.
It would be much simplier to define it one place. The most logical place to
define it is in debug.h, surrounded by #define guards. If IPA is changed,
then at that point the variable can be moved elsewhere.
gdb/gdbserver/ChangeLog:
* debug.c (remote_debug): Add definition.
* debug.h (remote_debug): Add declaration.
* hostio.c (remote_debug): Remove declaration.
* remote-utils.c (struct ui_file): Likewise.
(remote_debug): Likewise.
* remote-utils.h (remote_debug): Likewise,
* server.c (remote_debug): Remove definition.
This commit fixes some failures in gdb.base/interrupt.exp
when debugging a 32-bit i386 linux inferior from an amd64 host.
When running the following test...
make check RUNTESTFLAGS="--target_board unix/-m32 interrupt.exp"
... without this commit, I see the following output:
FAIL: gdb.base/interrupt.exp: continue (the program exited)
FAIL: gdb.base/interrupt.exp: echo data
FAIL: gdb.base/interrupt.exp: Send Control-C, second time
FAIL: gdb.base/interrupt.exp: signal SIGINT (the program is no longer running)
ERROR: Undefined command "".
ERROR: GDB process no longer exists
=== gdb Summary ===
When the test is run with this commit in place, we see 12 passes
instead. This is the desired behavior.
Analysis:
On Linux, when a syscall is interrupted by a signal, the syscall
may return -ERESTARTSYS when a signal occurs. Doing so indicates that
the syscall is restartable. Then, depending on settings associated
with the signal handler, and after the signal handler is called, the
kernel can then either return -EINTR or can cause the syscall to be
restarted. In this discussion, we are concerned with the latter
case.
On i386, the kernel returns this status via the EAX register.
When debugging a 32-bit (i386) process from a 64-bit (amd64)
GDB, the debugger fetches 64-bit registers even though the
process being debugged is 32-bit. Since we're debugging a 32-bit
target, only 32 bits are being saved in the register cache.
Now, ideally, GDB would save all 64-bits in the regcache and
then would be able to restore those same values when it comes
time to continue the target. I've looked into doing this, but
it's not easy and I don't see many benefits to doing so. One
benefit, however, would be that EAX would appear as a negative
value for doing syscall restarts.
At the moment, GDB is setting the high 32 bits of RAX (and other
registers too) to 0. So, when GDB restores EAX just prior to
a syscall restart, the high 32 bits of RAX are zeroed, thus making
it look like a positive value. For this particular purpose, we
need to sign extend EAX so that RAX will appear as a negative
value when EAX is set to -ERESTARTSYS. This in turn will cause
the signal handling code in the kernel to recognize -ERESTARTSYS
which will in turn cause the syscall to be restarted.
This commit is based on work by Jan Kratochvil from 2009:
https://sourceware.org/ml/gdb-patches/2009-11/msg00592.html
Jan's patch had the sign extension code in amd64-nat.c. Several
other native targets make use of this code, so it seemed better
to move the sign extension code to a linux specific file. I
also added similar code to gdbserver.
Another approach is to fix the problem in the kernel. Hui Zhu
tried to get a fix into the kernel back in 2014, but it was not
accepted. Discussion regarding this approach may be found here:
https://lore.kernel.org/patchwork/patch/457841/
Even if a fix were to be put into the kernel, we'd still need
some kind of fix in GDB in order to support older kernels.
Finally, I'll note that Fedora has been carrying a similar patch for
at least nine years. Other distributions, including RHEL and CentOS
have picked up this change and have been using it too.
gdb/ChangeLog:
* amd64-linux-nat.c (amd64_linux_collect_native_gregset): New
function.
(fill_gregset): Call amd64_linux_collect_native_gregset instead
of amd64_collect_native_gregset.
(amd64_linux_nat_target::store_registers): Likewise.
gdb/gdbserver/ChangeLog:
* linux-x86-low.c (x86_fill_gregset): Sign extend EAX value
when using a 64-bit gdbserver.
I noticed that find_thread_in_random duplicates the code in
find_thread_in_random, so this patch changes the latter to use the
former.
There are two other spots in gdb that do this, but to unify all of
them would require switching some code from using the "iterate over"
idiom to using iterators.
Another possible improvement is that find_thread_in_random could be
made single-pass using reservoir sampling.
Tested by the buildbot.
gdb/gdbserver/ChangeLog
2019-04-09 Tom Tromey <tromey@adacore.com>
* linux-low.c (select_event_lwp): Use find_thread_in_random.
This rewrites gdb's TRY/CATCH to plain C++ try/catch. The patch was
largely written by script, though one change (to a comment in
common-exceptions.h) was reverted by hand.
gdb/ChangeLog
2019-04-08 Tom Tromey <tom@tromey.com>
* xml-support.c: Use C++ exception handling.
* x86-linux-nat.c: Use C++ exception handling.
* windows-nat.c: Use C++ exception handling.
* varobj.c: Use C++ exception handling.
* value.c: Use C++ exception handling.
* valprint.c: Use C++ exception handling.
* valops.c: Use C++ exception handling.
* unittests/parse-connection-spec-selftests.c: Use C++ exception
handling.
* unittests/cli-utils-selftests.c: Use C++ exception handling.
* typeprint.c: Use C++ exception handling.
* tui/tui.c: Use C++ exception handling.
* tracefile-tfile.c: Use C++ exception handling.
* top.c: Use C++ exception handling.
* thread.c: Use C++ exception handling.
* target.c: Use C++ exception handling.
* symmisc.c: Use C++ exception handling.
* symfile-mem.c: Use C++ exception handling.
* stack.c: Use C++ exception handling.
* sparc64-linux-tdep.c: Use C++ exception handling.
* solib.c: Use C++ exception handling.
* solib-svr4.c: Use C++ exception handling.
* solib-spu.c: Use C++ exception handling.
* solib-frv.c: Use C++ exception handling.
* solib-dsbt.c: Use C++ exception handling.
* selftest-arch.c: Use C++ exception handling.
* s390-tdep.c: Use C++ exception handling.
* rust-lang.c: Use C++ exception handling.
* rust-exp.y: Use C++ exception handling.
* rs6000-tdep.c: Use C++ exception handling.
* rs6000-aix-tdep.c: Use C++ exception handling.
* riscv-tdep.c: Use C++ exception handling.
* remote.c: Use C++ exception handling.
* remote-fileio.c: Use C++ exception handling.
* record-full.c: Use C++ exception handling.
* record-btrace.c: Use C++ exception handling.
* python/python.c: Use C++ exception handling.
* python/py-value.c: Use C++ exception handling.
* python/py-utils.c: Use C++ exception handling.
* python/py-unwind.c: Use C++ exception handling.
* python/py-type.c: Use C++ exception handling.
* python/py-symbol.c: Use C++ exception handling.
* python/py-record.c: Use C++ exception handling.
* python/py-record-btrace.c: Use C++ exception handling.
* python/py-progspace.c: Use C++ exception handling.
* python/py-prettyprint.c: Use C++ exception handling.
* python/py-param.c: Use C++ exception handling.
* python/py-objfile.c: Use C++ exception handling.
* python/py-linetable.c: Use C++ exception handling.
* python/py-lazy-string.c: Use C++ exception handling.
* python/py-infthread.c: Use C++ exception handling.
* python/py-inferior.c: Use C++ exception handling.
* python/py-gdb-readline.c: Use C++ exception handling.
* python/py-framefilter.c: Use C++ exception handling.
* python/py-frame.c: Use C++ exception handling.
* python/py-finishbreakpoint.c: Use C++ exception handling.
* python/py-cmd.c: Use C++ exception handling.
* python/py-breakpoint.c: Use C++ exception handling.
* python/py-arch.c: Use C++ exception handling.
* printcmd.c: Use C++ exception handling.
* ppc-linux-tdep.c: Use C++ exception handling.
* parse.c: Use C++ exception handling.
* p-valprint.c: Use C++ exception handling.
* objc-lang.c: Use C++ exception handling.
* mi/mi-main.c: Use C++ exception handling.
* mi/mi-interp.c: Use C++ exception handling.
* mi/mi-cmd-stack.c: Use C++ exception handling.
* mi/mi-cmd-break.c: Use C++ exception handling.
* main.c: Use C++ exception handling.
* linux-thread-db.c: Use C++ exception handling.
* linux-tdep.c: Use C++ exception handling.
* linux-nat.c: Use C++ exception handling.
* linux-fork.c: Use C++ exception handling.
* linespec.c: Use C++ exception handling.
* language.c: Use C++ exception handling.
* jit.c: Use C++ exception handling.
* infrun.c: Use C++ exception handling.
* infcmd.c: Use C++ exception handling.
* infcall.c: Use C++ exception handling.
* inf-loop.c: Use C++ exception handling.
* i386-tdep.c: Use C++ exception handling.
* i386-linux-tdep.c: Use C++ exception handling.
* guile/scm-value.c: Use C++ exception handling.
* guile/scm-type.c: Use C++ exception handling.
* guile/scm-symtab.c: Use C++ exception handling.
* guile/scm-symbol.c: Use C++ exception handling.
* guile/scm-pretty-print.c: Use C++ exception handling.
* guile/scm-ports.c: Use C++ exception handling.
* guile/scm-param.c: Use C++ exception handling.
* guile/scm-math.c: Use C++ exception handling.
* guile/scm-lazy-string.c: Use C++ exception handling.
* guile/scm-frame.c: Use C++ exception handling.
* guile/scm-disasm.c: Use C++ exception handling.
* guile/scm-cmd.c: Use C++ exception handling.
* guile/scm-breakpoint.c: Use C++ exception handling.
* guile/scm-block.c: Use C++ exception handling.
* guile/guile-internal.h: Use C++ exception handling.
* gnu-v3-abi.c: Use C++ exception handling.
* gdbtypes.c: Use C++ exception handling.
* frame.c: Use C++ exception handling.
* frame-unwind.c: Use C++ exception handling.
* fbsd-tdep.c: Use C++ exception handling.
* f-valprint.c: Use C++ exception handling.
* exec.c: Use C++ exception handling.
* event-top.c: Use C++ exception handling.
* event-loop.c: Use C++ exception handling.
* eval.c: Use C++ exception handling.
* dwarf2read.c: Use C++ exception handling.
* dwarf2loc.c: Use C++ exception handling.
* dwarf2-frame.c: Use C++ exception handling.
* dwarf2-frame-tailcall.c: Use C++ exception handling.
* dwarf-index-write.c: Use C++ exception handling.
* dwarf-index-cache.c: Use C++ exception handling.
* dtrace-probe.c: Use C++ exception handling.
* disasm-selftests.c: Use C++ exception handling.
* darwin-nat.c: Use C++ exception handling.
* cp-valprint.c: Use C++ exception handling.
* cp-support.c: Use C++ exception handling.
* cp-abi.c: Use C++ exception handling.
* corelow.c: Use C++ exception handling.
* completer.c: Use C++ exception handling.
* compile/compile-object-run.c: Use C++ exception handling.
* compile/compile-object-load.c: Use C++ exception handling.
* compile/compile-cplus-symbols.c: Use C++ exception handling.
* compile/compile-c-symbols.c: Use C++ exception handling.
* common/selftest.c: Use C++ exception handling.
* common/new-op.c: Use C++ exception handling.
* cli/cli-script.c: Use C++ exception handling.
* cli/cli-interp.c: Use C++ exception handling.
* cli/cli-cmds.c: Use C++ exception handling.
* c-varobj.c: Use C++ exception handling.
* btrace.c: Use C++ exception handling.
* breakpoint.c: Use C++ exception handling.
* break-catch-throw.c: Use C++ exception handling.
* arch-utils.c: Use C++ exception handling.
* amd64-tdep.c: Use C++ exception handling.
* ada-valprint.c: Use C++ exception handling.
* ada-typeprint.c: Use C++ exception handling.
* ada-lang.c: Use C++ exception handling.
* aarch64-tdep.c: Use C++ exception handling.
gdb/gdbserver/ChangeLog
2019-04-08 Tom Tromey <tom@tromey.com>
* server.c: Use C++ exception handling.
* linux-low.c: Use C++ exception handling.
* gdbreplay.c: Use C++ exception handling.
This patch fixes a build error due to a call to ppc_get_auxv that was
left over after linux_get_hwcap and linux_get_hwcap2 were introduced
in:
974c89e088 gdbserver: Add
linux_get_hwcap
Because the missing call fetched AT_PHDR and not AT_HWCAP,
linux_get_auxv is now visible.
This use also required ppc_get_auxv to return a status variable
indicating that the AT_PHDR entry was not found separately from the
actual value of of the auxv entry. Therefore, the new linux_get_auxv
function is changed to return a status variable and write the entry
value to a pointer passed as an argument.
Note that linux_get_hwcap and linux_get_hwcap2 still use the return
value as both an indicator of that the entry wasn't found and as the
actual value of the entry.
gdb/gdbserver/ChangeLog:
2019-04-05 Pedro Franco de Carvalho <pedromfc@linux.ibm.com>
* linux-low.c (linux_get_auxv): Remove static. Return auxv entry
value in argument pointer, return 1 if the entry is found and 0
otherwise. Move comment.
(linux_get_hwcap, linux_get_hwcap2): Use modified linux_get_auxv.
* linux-low.h (linux_get_auxv): Declare.
* linux-ppc-low.c (is_elfv2_inferior): Use linux_get_auxv.
I noticed that "gdbserver --help" contains a few metasyntactic
variables that aren't in upper-case. This patch fixes them to conform
to the GNU standard.
gdb/gdbserver/ChangeLog
2019-04-05 Tom Tromey <tromey@adacore.com>
* server.c (gdbserver_usage): Use upper-case for metasyntactic
variables.
When using older compilers, AT_HWCAP2 may not be be defined.
It is defined in elf/common.h, however including this in
gdbserver/linux-low.c causes conflicts.
Manually add the define if it does not exist.
gdb/gdbserver/ChangeLog:
* linux-low.c (AT_HWCAP2): Add define if not already included.
Add the pauth registers to the regset lists.
Add a new regset type OPTIONAL_REGS which allows for the regset read to fail.
Once the read fails, it will not be checked again. This allows targets with
optional features to keep a single static regset_info structure.
gdb/ChangeLog:
* arch/aarch64.h (AARCH64_PAUTH_REGS_SIZE): New define.
gdb/gdbserver/ChangeLog:
* linux-aarch64-low.c (aarch64_store_pauthregset): New function.
* linux-low.c (regsets_store_inferior_registers): Allow optional reads
to fail.
* linux-low.h (enum regset_type): Add OPTIONAL_REGS.
Add aarch64_get_hwcap functions for reading the HWCAP.
From this extract the PACA value and use this to enable pauth.
gdb/ChangeLog:
* aarch64-linux-nat.c
(aarch64_linux_nat_target::read_description): Read PACA hwcap.
* aarch64-linux-tdep.c
(aarch64_linux_core_read_description): Likewise.
(aarch64_linux_get_hwcap): New function.
* aarch64-linux-tdep.h (AARCH64_HWCAP_PACA): New define.
(aarch64_linux_get_hwcap): New declaration.
gdb/gdbserver/ChangeLog:
* linux-aarch64-low.c (AARCH64_HWCAP_PACA): New define.
(aarch64_get_hwcap): New function.
(aarch64_arch_setup): Read APIA hwcap.
Pointer Authentication is a new feature in AArch64 v8.3-a. When enabled in
the compiler, function return addresses will be mangled by the kernel.
Add register description xml and wire up to aarch64_linux_read_description.
This description includes the two pauth user registers.
Nothing yet uses the feature - that is added in later patches.
gdb/ChangeLog:
* aarch64-linux-nat.c
(aarch64_linux_nat_target::read_description): Add pauth param.
* aarch64-linux-tdep.c
(aarch64_linux_core_read_description): Likewise.
* aarch64-tdep.c (struct target_desc): Add in pauth.
(aarch64_read_description): Add pauth param.
(aarch64_gdbarch_init): Likewise.
* aarch64-tdep.h (aarch64_read_description): Likewise.
* arch/aarch64.c (aarch64_create_target_description): Likewise.
* arch/aarch64.h (aarch64_create_target_description): Likewise.
* features/Makefile: Add new files.
* features/aarch64-pauth.c: New file.
* features/aarch64-pauth.xml: New file.
gdb/doc/ChangeLog:
* gdb.texinfo: Describe pauth feature.
gdb/gdbserver/ChangeLog:
* linux-aarch64-ipa.c (get_ipa_tdesc): Add pauth param.
(initialize_low_tracepoint): Likewise.
* linux-aarch64-low.c (aarch64_arch_setup): Likewise.
* linux-aarch64-tdesc-selftest.c (aarch64_tdesc_test): Likewise.
* linux-aarch64-tdesc.c (struct target_desc): Likewise.
(aarch64_linux_read_description): Likewise.
* linux-aarch64-tdesc.h (aarch64_linux_read_description): Likewise.
As on amd64, these registers hold the base address of the fs and gs
segments, respectively. For i386 these two registers are 32 bits.
gdb/ChangeLog:
* amd64-fbsd-nat.c (amd64_fbsd_nat_target::read_description):
Update calls to i386_target_description to add 'segments'
parameter.
* amd64-tdep.c (amd64_init_abi): Set tdep->fsbase_regnum. Don't
add segment base registers.
* arch/i386.c (i386_create_target_description): Add 'segments'
parameter to enable segment base registers.
* arch/i386.h (i386_create_target_description): Likewise.
* features/i386/32bit-segments.xml: New file.
* features/i386/32bit-segments.c: Generate.
* i386-fbsd-nat.c (i386_fbsd_nat_target::read_description): Update
call to i386_target_description to add 'segments' parameter.
* i386-fbsd-tdep.c (i386fbsd_core_read_description): Likewise.
* i386-go32-tdep.c (i386_go32_init_abi): Likewise.
* i386-linux-tdep.c (i386_linux_read_description): Likewise.
* i386-tdep.c (i386_validate_tdesc_p): Add segment base registers
if feature is present.
(i386_gdbarch_init): Pass I386_NUM_REGS to set_gdbarch_num_regs.
Add 'segments' parameter to call to i386_target_description.
(i386_target_description): Add 'segments' parameter to enable
segment base registers.
(_initialize_i386_tdep) [GDB_SELF_TEST]: Add 'segments' parameter
to call to i386_target_description.
* i386-tdep.h (struct gdbarch_tdep): Add 'fsbase_regnum'.
(enum i386_regnum): Add I386_FSBASE_REGNUM and I386_GSBASE_REGNUM.
Define I386_NUM_REGS.
(i386_target_description): Add 'segments' parameter to enable
segment base registers.
gdb/gdbserver/ChangeLog:
* linux-x86-tdesc.c (i386_linux_read_description): Update call to
i386_create_target_description for 'segments' parameter.
* lynx-i386-low.c (lynx_i386_arch_setup): Likewise.
* nto-x86-low.c (nto_x86_arch_setup): Likewise.
* win32-i386-low.c (i386_arch_setup): Likewise.
This removes the last cleanup from gdbserver, replacing it with
SCOPE_EXIT. This could perhaps be done in a different way, but this
approach was direct and obviously correct.
2019-03-06 Tom Tromey <tom@tromey.com>
* server.c (detach_or_kill_for_exit_cleanup): Remove parameter.
(captured_main): Use SCOPE_EXIT.
On commit 8ecfd7bd4a ("Add parameter to
allow enabling/disabling selftests via configure") it seems that I
forgot to use the proper '$enable_unittest' variable when checking to
see whether to add selftest-related objects to 'srv_regobj'. This
causes a build failure on Aarch64 when 'development=false' (which is
the case for the 8.3 branch) and 'enable_unittest=true'.
This patch fixes the problem by using '$enable_unittest' instead of
'$development' when performing the check. As a reminder, it's
important to notice that '$enable_unittest's default value (i.e., when
the option '--enable-unit-tests' is not passed to configure) is the
same as '$development', so this patch doesn't affect the current
build.
I'd like to install this patch both on master and on the 8.3 branch.
OK?
gdb/gdbserver/ChangeLog:
2019-03-04 Sergio Durigan Junior <sergiodj@redhat.com>
* configure.srv: Use '$enable_unittest' instead of '$development'
when checking whether to fill 'srv_regobj' on 'aarch64*-*-linux*'
case.
gdb/ChangeLog:
2019-03-02 Eli Zaretskii <eliz@gnu.org>
PR gdb/24292
* common/netstuff.c:
* gdbserver/gdbreplay.c
* gdbserver/remote-utils.c:
* ser-tcp.c:
* unittests/parse-connection-spec-selftests.c [USE_WIN32API]:
Include ws2tcpip.h instead of wsiapi.h and winsock2.h. Redefine
_WIN32_WINNT to 0x0501 if defined to a smaller value, as
'getaddrinfo' and 'freeaddrinfo' were not available before
Windows XP, and mingw.org's MinGW headers by default define
_WIN32_WINNT to 0x500.
I tried gdbreplay yesterday, but the remotelogfile I received was made
on Windows, so the lines were terminated with \r\n rather than plain
\n.
This patch changes gdbreplay to allow \r\n line termination when
reading the log file.
gdb/gdbserver/ChangeLog
2019-02-27 Tom Tromey <tromey@adacore.com>
* gdbreplay.c (logchar): Handle \r\n.
The recent BP/WP changes for AArch64 swapping the order in add_lwp()
so that the process was added before the lwp. This was due to the lwp
creation requiring the process data.
This also needs changing in linux_attach().
Also add additional checks to make sure cannot attach to the same
process twice. Add test case for this - do this by splitting
attach.exp into distinct pass and error case sections.
Fixes gdb.server/ext-attach.exp on Aarch64.
gdb/gdbserver/ChangeLog:
* linux-low.c (linux_attach): Add process before lwp.
* server.c (attach_inferior): Check if already attached.
gdb/testsuite/ChangeLog:
* gdb.base/attach.exp: Add double attach test.
While working on my other scripts to deal with gdb headers, I noticed
that some files were missing include guards. I wrote a script to add
the missing ones, but found that using the obvious names for the
guards ran into clashes -- for example, gdb/nat/linux-nat.h used
"LINUX_NAT_H", but this was also the script's choice for
gdb/linux-nat.h.
So, I changed the script to normalize all include guards in gdb. This
patch is the result.
As usual the script is available here:
https://github.com/tromey/gdb-refactoring-scripts
Tested by rebuilding; I also ran it through "Fedora-x86_64-m64" on the
buildbot.
gdb/ChangeLog
2019-02-07 Tom Tromey <tom@tromey.com>
* yy-remap.h: Add include guard.
* xtensa-tdep.h: Add include guard.
* xcoffread.h: Rename include guard.
* varobj-iter.h: Add include guard.
* tui/tui.h: Rename include guard.
* tui/tui-winsource.h: Rename include guard.
* tui/tui-wingeneral.h: Rename include guard.
* tui/tui-windata.h: Rename include guard.
* tui/tui-win.h: Rename include guard.
* tui/tui-stack.h: Rename include guard.
* tui/tui-source.h: Rename include guard.
* tui/tui-regs.h: Rename include guard.
* tui/tui-out.h: Rename include guard.
* tui/tui-layout.h: Rename include guard.
* tui/tui-io.h: Rename include guard.
* tui/tui-hooks.h: Rename include guard.
* tui/tui-file.h: Rename include guard.
* tui/tui-disasm.h: Rename include guard.
* tui/tui-data.h: Rename include guard.
* tui/tui-command.h: Rename include guard.
* tic6x-tdep.h: Add include guard.
* target/waitstatus.h: Rename include guard.
* target/wait.h: Rename include guard.
* target/target.h: Rename include guard.
* target/resume.h: Rename include guard.
* target-float.h: Rename include guard.
* stabsread.h: Add include guard.
* rs6000-tdep.h: Add include guard.
* riscv-fbsd-tdep.h: Add include guard.
* regformats/regdef.h: Rename include guard.
* record.h: Rename include guard.
* python/python.h: Rename include guard.
* python/python-internal.h: Rename include guard.
* python/py-stopevent.h: Rename include guard.
* python/py-ref.h: Rename include guard.
* python/py-record.h: Rename include guard.
* python/py-record-full.h: Rename include guard.
* python/py-record-btrace.h: Rename include guard.
* python/py-instruction.h: Rename include guard.
* python/py-events.h: Rename include guard.
* python/py-event.h: Rename include guard.
* procfs.h: Add include guard.
* proc-utils.h: Add include guard.
* p-lang.h: Add include guard.
* or1k-tdep.h: Rename include guard.
* observable.h: Rename include guard.
* nto-tdep.h: Rename include guard.
* nat/x86-linux.h: Rename include guard.
* nat/x86-linux-dregs.h: Rename include guard.
* nat/x86-gcc-cpuid.h: Add include guard.
* nat/x86-dregs.h: Rename include guard.
* nat/x86-cpuid.h: Rename include guard.
* nat/ppc-linux.h: Rename include guard.
* nat/mips-linux-watch.h: Rename include guard.
* nat/linux-waitpid.h: Rename include guard.
* nat/linux-ptrace.h: Rename include guard.
* nat/linux-procfs.h: Rename include guard.
* nat/linux-osdata.h: Rename include guard.
* nat/linux-nat.h: Rename include guard.
* nat/linux-namespaces.h: Rename include guard.
* nat/linux-btrace.h: Rename include guard.
* nat/glibc_thread_db.h: Rename include guard.
* nat/gdb_thread_db.h: Rename include guard.
* nat/gdb_ptrace.h: Rename include guard.
* nat/fork-inferior.h: Rename include guard.
* nat/amd64-linux-siginfo.h: Rename include guard.
* nat/aarch64-sve-linux-sigcontext.h: Rename include guard.
* nat/aarch64-sve-linux-ptrace.h: Rename include guard.
* nat/aarch64-linux.h: Rename include guard.
* nat/aarch64-linux-hw-point.h: Rename include guard.
* mn10300-tdep.h: Add include guard.
* mips-linux-tdep.h: Add include guard.
* mi/mi-parse.h: Rename include guard.
* mi/mi-out.h: Rename include guard.
* mi/mi-main.h: Rename include guard.
* mi/mi-interp.h: Rename include guard.
* mi/mi-getopt.h: Rename include guard.
* mi/mi-console.h: Rename include guard.
* mi/mi-common.h: Rename include guard.
* mi/mi-cmds.h: Rename include guard.
* mi/mi-cmd-break.h: Rename include guard.
* m2-lang.h: Add include guard.
* location.h: Rename include guard.
* linux-record.h: Rename include guard.
* linux-nat.h: Add include guard.
* linux-fork.h: Add include guard.
* i386-darwin-tdep.h: Rename include guard.
* hppa-linux-offsets.h: Add include guard.
* guile/guile.h: Rename include guard.
* guile/guile-internal.h: Rename include guard.
* gnu-nat.h: Rename include guard.
* gdb-stabs.h: Rename include guard.
* frv-tdep.h: Add include guard.
* f-lang.h: Add include guard.
* event-loop.h: Add include guard.
* darwin-nat.h: Rename include guard.
* cp-abi.h: Rename include guard.
* config/sparc/nm-sol2.h: Rename include guard.
* config/nm-nto.h: Rename include guard.
* config/nm-linux.h: Add include guard.
* config/i386/nm-i386gnu.h: Rename include guard.
* config/djgpp/nl_types.h: Rename include guard.
* config/djgpp/langinfo.h: Rename include guard.
* compile/gcc-cp-plugin.h: Add include guard.
* compile/gcc-c-plugin.h: Add include guard.
* compile/compile.h: Rename include guard.
* compile/compile-object-run.h: Rename include guard.
* compile/compile-object-load.h: Rename include guard.
* compile/compile-internal.h: Rename include guard.
* compile/compile-cplus.h: Rename include guard.
* compile/compile-c.h: Rename include guard.
* common/xml-utils.h: Rename include guard.
* common/x86-xstate.h: Rename include guard.
* common/version.h: Rename include guard.
* common/vec.h: Rename include guard.
* common/tdesc.h: Rename include guard.
* common/selftest.h: Rename include guard.
* common/scoped_restore.h: Rename include guard.
* common/scoped_mmap.h: Rename include guard.
* common/scoped_fd.h: Rename include guard.
* common/safe-iterator.h: Rename include guard.
* common/run-time-clock.h: Rename include guard.
* common/refcounted-object.h: Rename include guard.
* common/queue.h: Rename include guard.
* common/ptid.h: Rename include guard.
* common/print-utils.h: Rename include guard.
* common/preprocessor.h: Rename include guard.
* common/pathstuff.h: Rename include guard.
* common/observable.h: Rename include guard.
* common/netstuff.h: Rename include guard.
* common/job-control.h: Rename include guard.
* common/host-defs.h: Rename include guard.
* common/gdb_wait.h: Rename include guard.
* common/gdb_vecs.h: Rename include guard.
* common/gdb_unlinker.h: Rename include guard.
* common/gdb_unique_ptr.h: Rename include guard.
* common/gdb_tilde_expand.h: Rename include guard.
* common/gdb_sys_time.h: Rename include guard.
* common/gdb_string_view.h: Rename include guard.
* common/gdb_splay_tree.h: Rename include guard.
* common/gdb_setjmp.h: Rename include guard.
* common/gdb_ref_ptr.h: Rename include guard.
* common/gdb_optional.h: Rename include guard.
* common/gdb_locale.h: Rename include guard.
* common/gdb_assert.h: Rename include guard.
* common/filtered-iterator.h: Rename include guard.
* common/filestuff.h: Rename include guard.
* common/fileio.h: Rename include guard.
* common/environ.h: Rename include guard.
* common/common-utils.h: Rename include guard.
* common/common-types.h: Rename include guard.
* common/common-regcache.h: Rename include guard.
* common/common-inferior.h: Rename include guard.
* common/common-gdbthread.h: Rename include guard.
* common/common-exceptions.h: Rename include guard.
* common/common-defs.h: Rename include guard.
* common/common-debug.h: Rename include guard.
* common/cleanups.h: Rename include guard.
* common/buffer.h: Rename include guard.
* common/btrace-common.h: Rename include guard.
* common/break-common.h: Rename include guard.
* cli/cli-utils.h: Rename include guard.
* cli/cli-style.h: Rename include guard.
* cli/cli-setshow.h: Rename include guard.
* cli/cli-script.h: Rename include guard.
* cli/cli-interp.h: Rename include guard.
* cli/cli-decode.h: Rename include guard.
* cli/cli-cmds.h: Rename include guard.
* charset-list.h: Add include guard.
* buildsym-legacy.h: Rename include guard.
* bfin-tdep.h: Add include guard.
* ax.h: Rename include guard.
* arm-linux-tdep.h: Add include guard.
* arm-fbsd-tdep.h: Add include guard.
* arch/xtensa.h: Rename include guard.
* arch/tic6x.h: Add include guard.
* arch/i386.h: Add include guard.
* arch/arm.h: Rename include guard.
* arch/arm-linux.h: Rename include guard.
* arch/arm-get-next-pcs.h: Rename include guard.
* arch/amd64.h: Add include guard.
* arch/aarch64-insn.h: Rename include guard.
* arch-utils.h: Rename include guard.
* annotate.h: Add include guard.
* amd64-darwin-tdep.h: Rename include guard.
* aarch64-linux-tdep.h: Add include guard.
* aarch64-fbsd-tdep.h: Add include guard.
* aarch32-linux-nat.h: Add include guard.
gdb/gdbserver/ChangeLog
2019-02-07 Tom Tromey <tom@tromey.com>
* x86-tdesc.h: Rename include guard.
* x86-low.h: Add include guard.
* wincecompat.h: Rename include guard.
* win32-low.h: Add include guard.
* utils.h: Rename include guard.
* tracepoint.h: Rename include guard.
* tdesc.h: Rename include guard.
* target.h: Rename include guard.
* server.h: Rename include guard.
* remote-utils.h: Rename include guard.
* regcache.h: Rename include guard.
* nto-low.h: Rename include guard.
* notif.h: Add include guard.
* mem-break.h: Rename include guard.
* lynx-low.h: Add include guard.
* linux-x86-tdesc.h: Add include guard.
* linux-s390-tdesc.h: Add include guard.
* linux-ppc-tdesc-init.h: Add include guard.
* linux-low.h: Add include guard.
* linux-aarch64-tdesc.h: Add include guard.
* linux-aarch32-low.h: Add include guard.
* inferiors.h: Rename include guard.
* i387-fp.h: Rename include guard.
* hostio.h: Rename include guard.
* gdbthread.h: Rename include guard.
* gdb_proc_service.h: Rename include guard.
* event-loop.h: Rename include guard.
* dll.h: Rename include guard.
* debug.h: Rename include guard.
* ax.h: Rename include guard.
The IPA objects currently may use gnulib replacement apis, which is
wrong: gnulib is not linked into the produced dso and it cannot be
because it is not built with -fPIC -fvisibility=hidden.
The gnulib replacement detection is broken under cross compilation:
for targets other than *-gnu*, replacements are enabled that depend
on execution time detection. This causes unnecessary build failure
when the target has proper support for the replaced api.
This fix tries to undo the replacements, which is tricky because the
gnulib headers are still used for various compile time fixups and
there is no simple knob in gnulib to only turn the replacements off.
Without this workaround gdb fails to cross build to non-gnu targets:
ld: tracepoint-ipa.o: in function `gdb_agent_helper_thread(void*)':
gdb/gdbserver/tracepoint.c:7221: undefined reference to `rpl_strerror'
...
Makefile:434: recipe for target 'libinproctrace.so' failed
gdb/gdbserver/ChangeLog:
PR gdb/23985
* Makefile.in (IPAGENT_CFLAGS): Add UNDO_GNULIB_CFLAGS.
(UNDO_GNULIB_CFLAGS): Undo gnulib replacements.
The recent BP/WP changes for AArch64 swapping the order in add_lwp()
so that the process was added before the lwp. This was due to the lwp
creation requiring the process data.
This also needs changing in linux_attach().
Fixes gdb.server/ext-attach.exp on Aarch64.
(This regression was hidden due to the racy nature of the gdb.server
tests - now they are no longer racy it'll be easier to spot. Also
checked X86).
gdb/gdbserver/ChangeLog:
2019-01-25 Alan Hayward <alan.hayward@arm.com>
* linux-low.c (linux_attach): Add process before lwp.
This changes the Makefiles to remove the -I for the common/
subdirectory. This will enforce the rule that includes must use the
'common/filename.h' form.
gdb/ChangeLog
2019-01-25 Tom Tromey <tom@tromey.com>
* Makefile.in (GDB_CFLAGS): Don't add -I for common.
gdb/gdbserver/ChangeLog
2019-01-25 Tom Tromey <tom@tromey.com>
* Makefile.in (INCLUDE_CFLAGS): Don't add -I for common.
gdb/ChangeLog:
* top.c (print_gdb_version): Update Copyright year in version
message.
gdb/gdbserver/ChangeLog:
* gdbreplay.c (gdbreplay_version): Update copyright year in
version message.
* server.c (gdbserver_version): Likewise.
This commit applies all changes made after running the gdb/copyright.py
script.
Note that one file was flagged by the script, due to an invalid
copyright header
(gdb/unittests/basic_string_view/element_access/char/empty.cc).
As the file was copied from GCC's libstdc++-v3 testsuite, this commit
leaves this file untouched for the time being; a patch to fix the header
was sent to gcc-patches first.
gdb/ChangeLog:
Update copyright year range in all GDB files.
On some heavily loaded AArch64 boxes, GDB will sometimes hang forever when
the inferior creates a thread. This hang happens inside the kernel during
the ptrace call to set hardware watchpoints or hardware breakpoints.
Currently, GDB will always set hw wp/bp at the start of each thread even if
there are none set in the process.
This patch works around the issue by avoiding setting hw wp/bp if there
are none set for the process.
On an effected machine, this fix drastically reduces the racy nature of the
gdb.threads test set. I ran the entire gdb test suite across all processors
for 100 iterations, then ran the results through the racy tests script.
Without the patch, 58 .exp files in gdb.threads were marked as racy. After
the patch this reduced to the same ~14 tests as the non effected boxes.
Clearly GDB will still be subject to hangs on an effect box if hw wp/bp's are
used prior to creating inferior threads on a heavily loaded system.
To enable this in gdbserver, the sequence in gdbserver add_lwp() is switched
to the same as gdb order as gdb, to ensure the thread is registered before
calling new_thread(). This allows aarch64_linux_new_thread() to read the
ptid.
gdb/ChangeLog:
* nat/aarch64-linux-hw-point.c
(aarch64_linux_any_set_debug_regs_state): New function.
* nat/aarch64-linux-hw-point.h
(aarch64_linux_any_set_debug_regs_state): New declaration.
* nat/aarch64-linux.c (aarch64_linux_new_thread): Check if any
BPs or WPs are set.
gdb/gdbserver/ChangeLog:
* linux-low.c (add_lwp): Switch ordering.
-fsanitize=address pointed out a use-after-free in gdbserver. In
particular, handle_detach could reference "process" after it was
deleted by detach_inferior. Avoiding this also necessitated changing
target_ops::join to take a pid rather than a process_info*.
Tested by the buildbot using a few of the gdbserver builders.
gdb/gdbserver/ChangeLog
2018-11-29 Tom Tromey <tom@tromey.com>
* win32-low.c (win32_join): Take pid, not process.
* target.h (struct target_ops) <join>: Change argument type.
(join_inferior): Change argument name.
* spu-low.c (spu_join): Take pid, not process.
* server.c (handle_detach): Preserve pid before destroying
process.
* lynx-low.c (lynx_join): Take pid, not process.
* linux-low.c (linux_join): Take pid, not process.
The cannot store/fetch register functions are only used for checking
if a register can be accessed using PEEKUSER/POKEUSER.
The AArch64 port doesn't support this method of access, so remove the
unused functions.
gdb/gdbserver:
* linux-aarch64-low.c (aarch64_cannot_store_register): Remove.
(aarch64_cannot_fetch_register): Likewise.
(struct linux_target_ops): Update references.
Patch "[PowerPC] Add support for PPR and DSCR" used
PTRACE_GETREGSET/SETREGSET without including the fallback definitions
from "nat/linux-ptrace.h". Include this header to avoid breaking
builds in systems that don't define them.
gdb/ChangeLog:
2018-10-31 Pedro Franco de Carvalho <pedromfc@linux.ibm.com>
* ppc-linux-nat.c: Include nat/linux-ptrace.h.
gdb/gdbserver/ChangeLog:
2018-10-31 Pedro Franco de Carvalho <pedromfc@linux.ibm.com>
* linux-ppc-low.c: Include nat/linux-ptrace.h.
This patch adds support for Hardware Transactional Memory registers
for the powerpc linux native and core file targets, and for the
pwoerpc linux server stub.
These registers include both the HTM special-purpose registers (TFHAR,
TEXASR and TFIAR) as well as the set of registers that are
checkpointed (saved) when a transaction is initiated, which the
processor restores in the event of a transaction failure.
The set of checkpointed general-purpose registers is returned by the
linux kernel in the same format as the regular general-purpose
registers, defined in struct pt_regs. However, the architecture
specifies that only some of the registers present in pt_regs are
checkpointed (GPRs 0-31, CR, XER, LR and CTR). The kernel fills the
slots for MSR and NIP with other info. The other fields usually don't
have meaningful values. GDB doesn't define registers that are not
checkpointed in the architecture, but when generating a core file, GDB
fills the slot for the checkpointed MSR with the regular MSR. These
are usually similar, although some bits might be different, and in
some cases the checkpointed MSR will have a value of 0 in a
kernel-generated core-file. The checkpointed NIP is filled with TFHAR
by GDB in the core-file, which is what the kernel does. The other
fields are set to 0 by GDB.
Core files generated by the kernel have a note section for
checkpointed GPRs with the same size for both 32-bit and 64-bit
threads, and the values for the registers of a 32-bit thread are
squeezed in the first half, with no useful data in the second half.
GDB generates a smaller note section for 32-bit threads, but can read
both sizes.
The checkpointed XER is required to be 32-bit in the target
description documentation, even though the more recent ISAs define it
as 64-bit wide, since the high-order 32-bits are reserved, and because
in Linux there is no way to get a 64-bit checkpointed XER for 32-bit
threads. If this changes in the future, the target description
feature requirement can be relaxed to allow for a 64-bit checkpointed
XER.
Access to the checkpointed CR (condition register) can be confusing.
The architecture only specifies that CR fields 1 to 7 (the 24 least
significant bits) are checkpointed, but the kernel provides all 8
fields (32 bits). The value of field 0 is not masked by ptrace, so it
will sometimes show the result of some kernel operation, probably
treclaim., which sets this field.
The checkpointed registers are marked not to be saved and restored.
Inferior function calls during an active transaction don't work well,
and it's unclear what should be done in this case. TEXASR and TFIAR
can be altered asynchronously, during transaction failure recording,
so they are also not saved and restored. For consistency neither is
TFHAR.
Record and replay also doesn't work well when transactions are
involved. This patch doesn't address this, so the values of the HTM
SPRs will sometimes be innacurate when the record/relay target is
enabled. For instance, executing a "tbegin." alters TFHAR and TEXASR,
but these changes are not currently recorded.
Because the checkpointed registers are only available when a
transaction is active (or suspended), ptrace can return ENODATA when
gdb tries to read these registers and the inferior is not in a
transactional state. The registers are set to the unavailable state
when this happens. When gbd tries to write to one of these registers,
and it is unavailable, an error is raised.
The "fill" functions for checkpointed register sets in the server stub
are not implemented for the same reason as for the EBB register set,
since ptrace can also return ENODATA for checkpointed regsets. The
same issues with 'G' packets apply here.
Just like for the EBB registers, tracepoints will not mark the
checkpointed registers as unavailable if the inferior was not in a
transaction, so their content will also show 0 instead of
<unavailable> when inspecting trace data.
The new tests record the values of the regular registers before
stepping the inferior through a "tbegin." instruction to start a
transaction, then the checkpointed registers are checked against the
recorded pre-transactional values. New values are written to the
checkpointed registers and recorded, the inferior continues until the
transaction aborts (which is usually immediately when it is resumed),
and the regular registers are checked against the recorded values,
because the abort should have reverted the registers to these values.
Like for the EBB registers, target_store_registers will ignore the
checkpointed registers when called with -1 as the regno
argument (store all registers in one go).
gdb/ChangeLog:
2018-10-26 Edjunior Barbosa Machado <emachado@linux.vnet.ibm.com>
Pedro Franco de Carvalho <pedromfc@linux.ibm.com>
* arch/ppc-linux-tdesc.h (tdesc_powerpc_isa207_htm_vsx32l)
(tdesc_powerpc_isa207_htm_vsx64l): Declare.
* arch/ppc-linux-common.h (PPC_LINUX_SIZEOF_TM_SPRREGSET)
(PPC32_LINUX_SIZEOF_CGPRREGSET, PPC64_LINUX_SIZEOF_CGPRREGSET)
(PPC_LINUX_SIZEOF_CFPRREGSET, PPC_LINUX_SIZEOF_CVMXREGSET)
(PPC_LINUX_SIZEOF_CVSXREGSET, PPC_LINUX_SIZEOF_CPPRREGSET)
(PPC_LINUX_SIZEOF_CDSCRREGSET, PPC_LINUX_SIZEOF_CTARREGSET):
Define.
(struct ppc_linux_features) <htm>: New field.
(ppc_linux_no_features): Add initializer for htm field.
* arch/ppc-linux-common.c (ppc_linux_match_description): Return
new tdescs.
* nat/ppc-linux.h (PPC_FEATURE2_HTM, NT_PPC_TM_CGPR)
(NT_PPC_TM_CFPR, NT_PPC_TM_CVMX, NT_PPC_TM_CVSX)
(NT_PPC_TM_SPR, NT_PPC_TM_CTAR, NT_PPC_TM_CPPR, NT_PPC_TM_CDSCR):
Define if not already defined.
* features/Makefile (WHICH): Add rs6000/powerpc-isa207-htm-vsx32l
and rs6000/powerpc-isa207-htm-vsx64l.
(XMLTOC): Add rs6000/powerpc-isa207-htm-vsx32l.xml and
rs6000/powerpc-isa207-htm-vsx64l.xml.
* features/rs6000/power-htm-spr.xml: New file.
* features/rs6000/power-htm-core.xml: New file.
* features/rs6000/power64-htm-core.xml: New file.
* features/rs6000/power-htm-fpu.xml: New file.
* features/rs6000/power-htm-altivec.xml: New file.
* features/rs6000/power-htm-vsx.xml: New file.
* features/rs6000/power-htm-ppr.xml: New file.
* features/rs6000/power-htm-dscr.xml: New file.
* features/rs6000/power-htm-tar.xml: New file.
* features/rs6000/powerpc-isa207-htm-vsx32l.xml: New file.
* features/rs6000/powerpc-isa207-htm-vsx64l.xml: New file.
* features/rs6000/powerpc-isa207-htm-vsx32l.c: Generate.
* features/rs6000/powerpc-isa207-htm-vsx64l.c: Generate.
* regformats/rs6000/powerpc-isa207-htm-vsx32l.dat: Generate.
* regformats/rs6000/powerpc-isa207-htm-vsx64l.dat: Generate.
* ppc-linux-nat.c (fetch_register, fetch_ppc_registers): Call
fetch_regset with HTM regsets.
(store_register, store_ppc_registers): Call store_regset with HTM
regsets.
(ppc_linux_nat_target::read_description): Set htm field in the
features struct if needed.
* ppc-linux-tdep.c: Include
features/rs6000/powerpc-isa207-htm-vsx32l.c and
features/rs6000/powerpc-isa207-htm-vsx64l.c.
(ppc32_regmap_tm_spr, ppc32_regmap_cgpr, ppc64_le_regmap_cgpr)
(ppc64_be_regmap_cgpr, ppc32_regmap_cfpr, ppc32_le_regmap_cvmx)
(ppc32_be_regmap_cvmx, ppc32_regmap_cvsx, ppc32_regmap_cppr)
(ppc32_regmap_cdscr, ppc32_regmap_ctar): New globals.
(ppc32_linux_tm_sprregset, ppc32_linux_cgprregset)
(ppc64_be_linux_cgprregset, ppc64_le_linux_cgprregset)
(ppc32_linux_cfprregset, ppc32_le_linux_cvmxregset)
(ppc32_be_linux_cvmxregset, ppc32_linux_cvsxregset)
(ppc32_linux_cpprregset, ppc32_linux_cdscrregset)
(ppc32_linux_ctarregset): New globals.
(ppc_linux_cgprregset, ppc_linux_cvmxregset): New functions.
(ppc_linux_collect_core_cpgrregset): New function.
(ppc_linux_iterate_over_regset_sections): Call back with the htm
regsets.
(ppc_linux_core_read_description): Check if the tm spr section is
present and set htm in the features struct.
(_initialize_ppc_linux_tdep): Call
initialize_tdesc_powerpc_isa207_htm_vsx32l and
initialize_tdesc_powerpc_isa207_htm_vsx64l.
* ppc-linux-tdep.h (ppc_linux_cgprregset, ppc_linux_cvmxregset):
Declare.
(ppc32_linux_tm_sprregset, ppc32_linux_cfprregset)
(ppc32_linux_cvsxregset, ppc32_linux_cpprregset)
(ppc32_linux_cdscrregset, ppc32_linux_ctarregset): Declare.
* ppc-tdep.h (struct gdbarch_tdep) <have_htm_spr, have_htm_core>:
New fields.
<have_htm_fpu, have_htm_altivec, have_htm_vsx>:
Likewise.
<ppc_cppr_regnum, ppc_cdscr_regnum, ppc_ctar_regnum>: Likewise.
<ppc_cdl0_regnum, ppc_cvsr0_regnum, ppc_cefpr0_regnum>: Likewise.
(enum) <PPC_TFHAR_REGNUM, PPC_TEXASR_REGNUM, PPC_TFIAR_REGNUM>:
New enum fields.
<PPC_CR0_REGNUM, PPC_CCR_REGNUM, PPC_CXER_REGNUM>: Likewise.
<PPC_CLR_REGNUM, PPC_CCTR_REGNUM, PPC_CF0_REGNUM>: Likewise.
<PPC_CFPSCR_REGNUM, PPC_CVR0_REGNUM, PPC_CVSCR_REGNUM>: Likewise.
<PPC_CVRSAVE_REGNUM, PPC_CVSR0_UPPER_REGNUM>: Likewise.
<PPC_CPPR_REGNUM, PPC_CDSCR_REGNUM>: Likewise.
<PPC_CTAR_REGNUM>: Likewise.
(PPC_IS_TMSPR_REGNUM, PPC_IS_CKPTGP_REGNUM, PPC_IS_CKPTFP_REGNUM)
(PPC_IS_CKPTVMX_REGNUM, PPC_IS_CKPTVSX_REGNUM): Define.
* rs6000-tdep.c (IS_CDFP_PSEUDOREG, IS_CVSX_PSEUDOREG)
(IS_CEFP_PSEUDOREG): Define.
(rs6000_register_name): Hide the upper halves of checkpointed VSX
registers. Return names for the checkpointed DFP, VSX, and EFP
pseudo registers.
(rs6000_pseudo_register_type): Remove initial assert and raise an
internal error in the else clause instead. Return types for the
checkpointed DFP, VSX, and EFP pseudo registers.
(dfp_pseudo_register_read, dfp_pseudo_register_write): Handle
checkpointed DFP pseudo registers.
(vsx_pseudo_register_read, vsx_pseudo_register_write): Handle
checkpointed VSX pseudo registers.
(efp_pseudo_register_read, efp_pseudo_register_write): Rename
from efpr_pseudo_register_read and
efpr_pseudo_register_write. Handle checkpointed EFP pseudo
registers.
(rs6000_pseudo_register_read, rs6000_pseudo_register_write):
Handle checkpointed DFP, VSX, and EFP registers.
(dfp_ax_pseudo_register_collect, vsx_ax_pseudo_register_collect)
(efp_ax_pseudo_register_collect): New functions.
(rs6000_ax_pseudo_register_collect): Move DFP, VSX and EFP pseudo
register logic to new functions. Handle checkpointed DFP, VSX,
and EFP pseudo registers.
(rs6000_gdbarch_init): Look for and validate the htm features.
Include checkpointed DFP, VSX and EFP pseudo-registers.
* NEWS: Mention access to PPR, DSCR, TAR, EBB/PMU registers and
HTM registers.
gdb/gdbserver/ChangeLog:
2018-10-26 Pedro Franco de Carvalho <pedromfc@linux.ibm.com>
* configure.srv (ipa_ppc_linux_regobj): Add
powerpc-isa207-htm-vsx32l-ipa.o and
powerpc-isa207-htm-vsx64l-ipa.o.
(powerpc*-*-linux*): Add powerpc-isa207-htm-vsx32l.o and
powerpc-isa207-htm-vsx64l.o to srv_regobj. Add
rs6000/power-htm-spr.xml, rs6000/power-htm-core.xml,
rs6000/power64-htm-core.xml, rs6000/power-htm-fpu.xml,
rs6000/power-htm-altivec.xml, rs6000/power-htm-vsx.xml,
rs6000/power-htm-ppr.xml, rs6000/power-htm-dscr.xml,
rs6000/power-htm-tar.xml, rs6000/powerpc-isa207-htm-vsx32l.xml,
and rs6000/powerpc-isa207-htm-vsx64l.xml to srv_xmlfiles.
* linux-ppc-tdesc-init.h (enum ppc_linux_tdesc)
<PPC_TDESC_ISA207_HTM_VSX>: New enum value.
(init_registers_powerpc_isa207_htm_vsx32l)
(init_registers_powerpc_isa207_htm_vsx64l): Declare.
* linux-ppc-low.c (ppc_fill_tm_sprregset, ppc_store_tm_sprregset)
(ppc_store_tm_cgprregset, ppc_store_tm_cfprregset)
(ppc_store_tm_cvrregset, ppc_store_tm_cvsxregset)
(ppc_store_tm_cpprregset, ppc_store_tm_cdscrregset)
(ppc_store_tm_ctarregset): New functions.
(ppc_regsets): Add entries for HTM regsets.
(ppc_arch_setup): Set htm in features struct when needed. Set
sizes for the HTM regsets.
(ppc_get_ipa_tdesc_idx): Return PPC_TDESC_ISA207_HTM_VSX.
(initialize_low_arch): Call
init_registers_powerpc_isa207_htm_vsx32l and
init_registers_powerpc_isa207_htm_vsx64l.
* linux-ppc-ipa.c (get_ipa_tdesc): Handle
PPC_TDESC_ISA207_HTM_VSX.
(initialize_low_tracepoint): Call
init_registers_powerpc_isa207_htm_vsx32l and
init_registers_powerpc_isa207_htm_vsx64l.
gdb/testsuite/ChangeLog:
2018-10-26 Pedro Franco de Carvalho <pedromfc@linux.ibm.com>
* gdb.arch/powerpc-htm-regs.c: New file.
* gdb.arch/powerpc-htm-regs.exp: New file.
gdb/doc/ChangeLog:
2018-10-26 Pedro Franco de Carvalho <pedromfc@linux.ibm.com>
* gdb.texinfo (PowerPC Features): Describe new features
"org.gnu.gdb.power.htm.spr", "org.gnu.gdb.power.htm.core",
"org.gnu.gdb.power.htm.fpu", "org.gnu.gdb.power.htm.altivec",
"org.gnu.gdb.power.htm.vsx", "org.gnu.gdb.power.htm.ppr",
"org.gnu.gdb.power.htm.dscr", "org.gnu.gdb.power.htm.tar".
This patch adds support for registers of the Event Based Branching and
Performance Monitoring Units for the powerpc linux native and core
file targets, and for the powerpc linux server stub.
All three EBB registers are accessible. Only a subset of the PMU
registers can be accessed through ptrace. Because of this, the PMU
registers are enumerated individually in gdbarch_tdep, as opposed to
having a single "have_pmu" flag. This is intended to make it easier
to add additional PMU registers in the future, since checking a
"have_pmu" flag elsewhere in the code would no longer be correct. The
tdesc feature is named org.gnu.gdb.power.linux.pmu because of this.
It's unclear if it makes sense to save and restore these registers
across function calls, since some of them can be modified
asynchronously. They are also not tracked in record-replay mode.
The kernel can return ENODATA when ptrace is used to get the EBB
registers, unless a linux performance event that uses EBB is open in
the inferior. For this reason, the "fill" functions in the server
stub for the ebb register sets is not implemented.
Since gdbserver writes all registers in one go before resuming the
inferior, this error would not be detected at the time the user tries
to write to one of the registers on the client side, and gdbserver
would print out warnings every time it resumes the inferior when no
ebb performance event is opened, so there is currently no
straightforward way to handle this case. This means the ebb registers
in the client-side regcache can become dirty when the user tries to
write to them, until the inferior is resumed and stopped again.
A related issue is that 'G' packets used to write to unrelated
registers will include bad data for the EBB registers if they are
unavailable, since no register status information is included in the
'G' packet. This data won't be written to the inferior by the
gdbserver stub because the "fill" functions are not implemented, and
currently the gdbserver stub doesn't change the status of the
registers in its own regcache in response to 'G' packets.
Another limitation for the ebb registers is that traceframes don't
record if registers are available or not, so if these registers are
collected when a tracepoint is hit and the inferior has no ebb event
opened, the user will see zero values for all of them, instead of the
usual <unavailable>.
Because these registers are often unavailable, trying to store them
with target_store_registers with -1 for the regno argument (all
registers) would almost always fail, so they are ignored in this case.
gdb/ChangeLog:
2018-10-26 Edjunior Barbosa Machado <emachado@linux.vnet.ibm.com>
Pedro Franco de Carvalho <pedromfc@linux.ibm.com>
* arch/ppc-linux-common.h (PPC_LINUX_SIZEOF_EBBREGSET)
(PPC_LINUX_SIZEOF_PMUREGSET): Declare.
* nat/ppc-linux.h (PPC_FEATURE2_EBB, NT_PPC_EBB, NT_PPC_PMU):
Define if not already defined.
* features/rs6000/power-ebb.xml: New file.
* features/rs6000/power-linux-pmu.xml: New file.
* features/rs6000/powerpc-isa207-vsx32l.xml: Include ebb and pmu
features.
* features/rs6000/powerpc-isa207-vsx64l.xml: Likewise.
* features/rs6000/powerpc-isa207-vsx32l.c: Re-generate.
* features/rs6000/powerpc-isa207-vsx64l.c: Re-generate.
* regformats/rs6000/powerpc-isa207-vsx32l.dat: Re-generate.
* regformats/rs6000/powerpc-isa207-vsx64l.dat: Re-generate.
* ppc-linux-nat.c (fetch_register, fetch_ppc_registers): Call
fetch_regset with ebb and pmu regsets.
(store_register, store_ppc_registers): Call store_regset with ebb
and pmu regsets.
(ppc_linux_nat_target::read_description): Set isa207 field in the
features struct if ebb and pmu are avaiable.
* ppc-linux-tdep.c (ppc32_regmap_ebb, ppc32_regmap_pmu)
(ppc32_linux_ebbregset, ppc32_linux_pmuregset): New globals.
(ppc_linux_iterate_over_regset_sections): Call back with the ebb
and pmu regsets.
(ppc_linux_core_read_description): Check if the pmu section is
present and set isa207 in the features struct.
* ppc-linux-tdep.h (ppc32_linux_ebbregset)
(ppc32_linux_pmuregset): Declare.
* ppc-tdep.h (struct gdbarch_tdep) <ppc_mmcr0_regnum>: New field.
<ppc_mmcr2_regnum, ppc_siar_regnum, ppc_sdar_regnum>: New fields.
<ppc_sier_regnum>: New field.
(enum): <PPC_BESCR_REGNUM, PPC_EBBHR_REGNUM, PPC_EBBRR_REGNUM>:
New enum values.
<PPC_MMCR0_REGNUM, PPC_MMCR2_REGNUM, PPC_SIAR_REGNUM>: New enum
values.
<PPC_SDAR_REGNUM, PPC_SIER_REGNUM>: New enum values.
(PPC_IS_EBB_REGNUM, PPC_IS_PMU_REGNUM): Define.
* rs6000-tdep.c (rs6000_gdbarch_init): Look for and validate the
ebb and pmu features.
gdb/gdbserver/ChangeLog:
2018-10-26 Pedro Franco de Carvalho <pedromfc@linux.ibm.com>
* configure.srv (powerpc*-*-linux*): Add rs6000/power-ebb.xml and
rs6000/power-linux-pmu.xml to srv_xmlfiles.
* linux-ppc-low.c (ppc_store_ebbregset, ppc_fill_pmuregset)
(ppc_store_pmuregset): New functions.
(ppc_regsets): Add entries for ebb and pmu regsets.
(ppc_arch_setup): Set isa207 in features struct if the ebb and
pmu regsets are available. Set sizes for these regsets.
gdb/doc/ChangeLog:
2018-10-26 Pedro Franco de Carvalho <pedromfc@linux.ibm.com>
* gdb.texinfo (PowerPC Features): Describe new features
"org.gnu.gdb.power.ebb" and "org.gnu.gdb.power.linux.pmu".
This patch adds support for the Target Address Register for powerpc
linux native and core file targets, and in the powerpc linux server
stub.
gdb/ChangeLog:
2018-10-26 Edjunior Barbosa Machado <emachado@linux.vnet.ibm.com>
Pedro Franco de Carvalho <pedromfc@linux.ibm.com>
* arch/ppc-linux-tdesc.h (tdesc_powerpc_isa207_vsx32l)
(tdesc_powerpc_isa207_vsx64l): Declare.
* arch/ppc-linux-common.h (PPC_LINUX_SIZEOF_TARREGSET): Define.
(struct ppc_linux_features) <isa207>: New field.
(ppc_linux_no_features): Add initializer for isa207 field.
* arch/ppc-linux-common.c (ppc_linux_match_description): Return
new tdescs.
* nat/ppc-linux.h (PPC_FEATURE2_ARCH_2_07, PPC_FEATURE2_TAR)
(NT_PPC_TAR): Define if not already defined.
* features/Makefile (WHICH): Add rs6000/powerpc-isa207-vsx32l and
rs6000/powerpc-isa207-vsx64l.
(XMLTOC): Add rs6000/powerpc-isa207-vsx32l.xml and
rs6000/powerpc-isa207-vsx64l.xml.
* features/rs6000/power-tar.xml: New file.
* features/rs6000/powerpc-isa207-vsx32l.xml: New file.
* features/rs6000/powerpc-isa207-vsx64l.xml: New file.
* features/rs6000/powerpc-isa207-vsx32l.c: Generate.
* features/rs6000/powerpc-isa207-vsx64l.c: Generate.
* regformats/rs6000/powerpc-isa207-vsx32l.dat: Generate.
* regformats/rs6000/powerpc-isa207-vsx64l.dat: Generate.
* ppc-linux-nat.c (fetch_register, fetch_ppc_registers): Call
fetch_regset with the TAR regset.
(store_register, store_ppc_registers): Call store_regset with the
TAR regset.
(ppc_linux_nat_target::read_description): Set isa207 field in the
features struct if needed.
* ppc-linux-tdep.c: Include
features/rs6000/powerpc-isa207-vsx32l.c and
features/rs6000/powerpc-isa207-vsx64l.c.
(ppc32_regmap_tar, ppc32_linux_tarregset): New globals.
(ppc_linux_iterate_over_regset_sections): Call back with the tar
regset.
(ppc_linux_core_read_description): Check if the tar section is
present and set isa207 in the features struct.
(_initialize_ppc_linux_tdep): Call
initialize_tdesc_powerpc_isa207_vsx32l and
initialize_tdesc_powerpc_isa207_vsx64l.
* ppc-linux-tdep.h (ppc32_linux_tarregset): Declare.
* ppc-tdep.h (gdbarch_tdep) <ppc_tar_regnum>: New field.
(enum) <PPC_TAR_REGNUM>: New enum value.
* rs6000-tdep.c (rs6000_gdbarch_init): Look for and validate tar
feature.
(ppc_process_record_op31): Record changes to TAR.
gdb/gdbserver/ChangeLog:
2018-10-26 Pedro Franco de Carvalho <pedromfc@linux.ibm.com>
* configure.srv (ipa_ppc_linux_regobj): Add
powerpc-isa207-vsx64l-ipa.o and powerpc-isa207-vsx32l-ipa.o.
(powerpc*-*-linux*): Add powerpc-isa207-vsx32l.o and
powerpc-isa207-vsx64l.o to srv_regobj, add rs6000/power-tar.xml,
rs6000/powerpc-isa207-vsx32l.xml, and
rs6000/powerpc-isa207-vsx64l.xml to srv_xmlfiles.
* linux-ppc-tdesc-init.h (enum ppc_linux_tdesc)
<PPC_TDESC_ISA207_VSX>: New enum value.
(init_registers_powerpc_isa207_vsx32l): Declare.
(init_registers_powerpc_isa207_vsx64l): Declare.
* linux-ppc-low.c (ppc_fill_tarregset): New function.
(ppc_store_tarregset): New function.
(ppc_regsets): Add entry for the TAR regset.
(ppc_arch_setup): Set isa207 in features struct when needed. Set
size for the TAR regsets.
(ppc_get_ipa_tdesc_idx): Return PPC_TDESC_ISA207_VSX.
(initialize_low_arch): Call init_registers_powerpc_isa207_vsx32l
and init_registers_powerpc_isa207_vsx64l.
* linux-ppc-ipa.c (get_ipa_tdesc): Handle PPC_TDESC_ISA207_VSX.
(initialize_low_tracepoint): Call
init_registers_powerpc_isa207_vsx32l and
init_registers_powerpc_isa207_vsx64l.
gdb/testsuite/ChangeLog:
2018-10-26 Pedro Franco de Carvalho <pedromfc@linux.ibm.com>
* gdb.arch/powerpc-tar.c: New file.
* gdb.arch/powerpc-tar.exp: New file.
gdb/doc/ChangeLog:
2018-10-26 Pedro Franco de Carvalho <pedromfc@linux.ibm.com>
* gdb.texinfo (PowerPC Features): Describe new feature
"org.gnu.gdb.power.tar".
Simon Marchi
Tom Tromey
Tom Tromey
Pedro Alves
Kevin Buettner
Eli Zaretskii
Alan Hayward
Pedro Franco de Carvalho
John Baldwin
Sergio Durigan Junior
Szabolcs Nagy
Joel Brobecker
Simon Marchi
Edjunior Barbosa Machado