* configure: Regenerate.
gold/
* nacl.cc: New file.
* nacl.h: New file.
* Makefile.am (CCFILES, HFILES): Add them.
* Makefile.in: Regenerate.
* i386.cc (Output_data_plt_i386_nacl): New class.
(Output_data_plt_i386_nacl_exec): New class.
(Output_data_plt_i386_nacl_dyn): New class.
(Target_i386_nacl): New class.
(Target_selector_i386_nacl): New class.
(target_selector_i386): Use it instead of Target_selector_i386.
* x86_64.cc (Output_data_plt_x86_64_nacl): New class.
(Target_x86_64_nacl): New class.
(Target_selector_x86_64_nacl): New class.
(target_selector_x86_64, target_selector_x32): Use it instead of
Target_selector_x86_64.
* arm.cc (Output_data_plt_arm_nacl): New class.
(Target_arm_nacl): New class.
(Target_selector_arm_nacl): New class.
(target_selector_arm, target_selector_armbe): Use it instead of
Target_selector_arm.
* target-select.cc (select_target): Take new Input_file* and off_t
arguments, pass them on to recognize method of selector.
* object.cc (make_elf_sized_object): Update caller.
* parameters.cc (parameters_force_valid_target): Likewise.
* incremental.cc (make_sized_incremental_binary): Likewise.
* target-select.h: Update decl.
(Target_selector::recognize): Take new Input_file* argument,
pass it on to do_recognize.
(Target_selector::do_recognize): Take new Input_file* argument.
* freebsd.h (Target_selector_freebsd::do_recognize): Likewise.
* powerpc.cc (Target_selector_powerpc::do_recognize): Likewise.
* sparc.cc (Target_selector_sparc::do_recognize): Likewise.
* testsuite/testfile.cc (Target_selector::do_recognize): Likewise.
* target.h (Target::Target_info): New members isolate_execinstr
and rosegment_gap.
(Target::isolate_execinstr, Target::rosegment_gap): New methods.
* arm.cc (Target_arm::arm_info): Update initializer.
* i386.cc (Target_i386::i386_info): Likewise.
* powerpc.cc (Target_powerpc::powerpc_info): Likewise.
* sparc.cc (Target_sparc::sparc_info): Likewise.
* x86_64.cc (Target_x86_64::x86_64_info): Likewise.
* testsuite/testfile.cc (Target_test::test_target_info): Likewise.
* layout.cc (Layout::attach_allocated_section_to_segment):
Take new const Target* argument. If target->isolate_execinstr(), act
like --rosegment.
(Layout::find_first_load_seg): Take new const Target* argument;
if target->isolate_execinstr(), reject PF_X segments.
(Layout::relaxation_loop_body): Update caller.
(Layout::set_segment_offsets): If target->isolate_execinstr(),
reset file offset to zero when we hit LOAD_SEG, and then do a second
loop over the segments before LOAD_SEG to reassign offsets after
addresses have been determined. Handle target->rosegment_gap().
(Layout::attach_section_to_segment): Take new const Target* argument;
pass it to attach_allocated_section_to_segment.
(Layout::make_output_section): Update caller.
(Layout::attach_sections_to_segments): Take new const Target* argument;
pass it to attach_section_to_segment.
* gold.cc (queue_middle_tasks): Update caller.
* layout.h (Layout): Update method decls with new arguments.
* arm.cc (Target_arm::Target_arm): Take optional argument for the
Target_info pointer to use.
(Target_arm::do_make_data_plt): New virtual method.
(Target_arm::make_data_plt): New method that calls it.
(Target_arm::make_plt_entry): Use it.
(Output_data_plt_arm::Output_data_plt_arm): Take additional argument
for the section alignment.
(Output_data_plt_arm::do_first_plt_entry_offset): New abstract virtual
method.
(Output_data_plt_arm::first_plt_entry_offset): Call it.
(Output_data_plt_arm::do_get_plt_entry_size): New abstract virtual
method.
(Output_data_plt_arm::get_plt_entry_size): Call it.
(Output_data_plt_arm::do_fill_plt_entry): New abstract virtual method.
(Output_data_plt_arm::fill_plt_entry): New method that calls it.
(Output_data_plt_arm::do_fill_first_plt_entry): New abstract virtual
method.
(Output_data_plt_arm::fill_first_plt_entry): New method that calls it.
(Output_data_plt_arm::set_final_data_size): Use get_plt_entry_size
method instead of sizeof(plt_entry).
(Output_data_plt_arm::add_entry): Likewise.
Use first_plt_entry_offset method instead of sizeof(first_plt_entry).
(Target_arm::first_plt_entry_offset): Call method on this->plt_ rather
than static method.
(Target_arm::plt_entry_size): Likewise.
(Output_data_plt_arm::first_plt_entry, Output_data_plt_arm::plt_entry):
Move to ...
(Output_data_plt_arm_standard): ... here, new class.
(Output_data_plt_arm::do_write): Move guts of PLT filling to...
(Output_data_plt_arm_standard::do_fill_first_plt_entry): ... here ...
(Output_data_plt_arm_standard::do_fill_plt_entry): ... and here.
* x86_64.cc (Output_data_plt_x86_64::Output_data_plt_x86_64):
Take additional argument for the PLT entry size.
(Output_data_plt_x86_64::get_tlsdesc_plt_offset):
Use get_plt_entry_size method rather than plt_entry_size variable.
(Output_data_plt_x86_64::reserve_slot): Likewise.
(Output_data_plt_x86_64::do_adjust_output_section): Likewise.
(Output_data_plt_x86_64::add_entry): Likewise.
(Output_data_plt_x86_64::add_local_ifunc_entry): Likewise.
(Output_data_plt_x86_64::address_for_global): Likewise.
(Output_data_plt_x86_64::address_for_local): Likewise.
(Output_data_plt_x86_64::set_final_data_size): Likewise.
(Output_data_plt_x86_64::first_plt_entry_offset): Likewise.
Make method non-static.
(Output_data_plt_x86_64::do_get_plt_entry_size): New abstract virtual
method.
(Output_data_plt_x86_64::get_plt_entry_size): Just call that.
(Output_data_plt_x86_64::do_add_eh_frame): New abstract virtual method.
(Output_data_plt_x86_64::add_eh_frame): New method to call it.
(Output_data_plt_x86_64::do_fill_first_plt_entry): New abstract
virtual method.
(Output_data_plt_x86_64::fill_first_plt_entry): New method to call it.
(Output_data_plt_x86_64::do_fill_plt_entry): New abstract
virtual method.
(Output_data_plt_x86_64::fill_plt_entry): New method to call it.
(Output_data_plt_x86_64::do_fill_tlsdesc_entry): New abstract
virtual method.
(Output_data_plt_x86_64::fill_tlsdesc_entry): New method to call it.
(Output_data_plt_x86_64::plt_entry_size)
(Output_data_plt_x86_64::first_plt_entry)
(Output_data_plt_x86_64::plt_entry)
(Output_data_plt_x86_64::tlsdesc_plt_entry)
(Output_data_plt_x86_64::plt_eh_frame_fde_size)
(Output_data_plt_x86_64::plt_eh_frame_fde): Move to ...
(Output_data_plt_x86_64_standard): ... here, new class.
(Target_x86_64::Target_x86_64): Take optional argument for the
Target_info pointer to use.
(Target_x86_64::do_make_data_plt): New virtual method.
(Target_x86_64::make_data_plt): New method to call it.
(Target_x86_64::init_got_plt_for_update): Use that.
Call this->plt_->add_eh_frame method here.
(Output_data_plt_x86_64::init): Don't do add_eh_frame_for_plt here.
(Target_x86_64::first_plt_entry_offset): Call method on this->plt_
rather than static method.
(Target_x86_64::plt_entry_size): Likewise.
(Output_data_plt_x86_64::do_write): Use get_plt_entry_size method
rather than plt_entry_size variable. Move guts of PLT filling to...
(Output_data_plt_x86_64_standard::do_fill_first_plt_entry): ... here ...
(Output_data_plt_x86_64_standard::do_fill_plt_entry): ... and here ...
(Output_data_plt_x86_64_standard::do_fill_tlsdesc_entry): ... and here.
* i386.cc (Output_data_plt_i386::Output_data_plt_i386): Take
additional argument for the section alignment.
Don't do add_eh_frame_for_plt here.
(Output_data_plt_i386::first_plt_entry_offset): Make the method
non-static. Use get_plt_entry_size method rather than plt_entry_size
variable.
(Output_data_plt_i386::do_get_plt_entry_size): New abstract virtual
method.
(Output_data_plt_i386::get_plt_entry_size): Call it.
(Output_data_plt_i386::do_add_eh_frame): New abstract virtual method.
(Output_data_plt_i386::add_eh_frame): New method to call it.
(Output_data_plt_i386::do_fill_first_plt_entry): New abstract virtual
method.
(Output_data_plt_i386::fill_first_plt_entry): New method to call it.
(Output_data_plt_i386::do_fill_plt_entry): New abstract virtual
method.
(Output_data_plt_i386::fill_plt_entry): New method to call it.
(Output_data_plt_i386::set_final_data_size): Use get_plt_entry_size
method instead of plt_entry_size.
(Output_data_plt_i386::plt_entry_size)
(Output_data_plt_i386::plt_eh_frame_fde_size)
(Output_data_plt_i386::plt_eh_frame_fde): Move to ...
(Output_data_plt_i386_standard): ... here, new class.
(Output_data_plt_i386_exec): New class.
(Output_data_plt_i386::exec_first_plt_entry): Move to ...
(Output_data_plt_i386_exec::first_plt_entry): ... here.
(Output_data_plt_i386::exec_plt_entry): Move to ...
(Output_data_plt_i386_exec::plt_entry): ... here.
(Output_data_plt_i386_dyn): New class.
(Output_data_plt_i386::first_plt_entry): Move to ...
(Output_data_plt_i386_dyn::first_plt_entry): ... here.
(Output_data_plt_i386::dyn_plt_entry): Move to ...
(Output_data_plt_i386_dyn::plt_entry): ... here.
(Target_i386::Target_i386): Take optional argument for the Target_info
pointer to use.
(Target_i386::do_make_data_plt): New virtual method.
(Target_i386::make_data_plt): New method to call it.
(Target_i386::make_plt_section): Use that.
Call this->plt_->add_eh_frame method here.
(Output_data_plt_i386::add_entry): Use get_plt_entry_size method
rather than plt_entry_size variable.
(Output_data_plt_i386::add_local_ifunc_entry): Likewise.
(Output_data_plt_i386::address_for_local): Likewise.
(Output_data_plt_i386::do_write): Likewise.
Move guts of PLT filling to...
(Output_data_plt_i386_exec::do_fill_first_plt_entry): ... here ...
(Output_data_plt_i386_exec::do_fill_plt_entry): ... and here ...
(Output_data_plt_i386_dyn::do_fill_first_plt_entry): ... and here ...
(Output_data_plt_i386_dyn::do_fill_plt_entry): ... and here.
Change-Id: Id24b95600489835ff5e860a39c147203d4380c2b
* doc/gdb.texinfo (Blocks In Python): Add a note saying that
future improvements to GDB and its infrastructure can move
symbols across blocks within a symbol table.
* dwarf_reader.cc (Dwarf_die::address_attribute): New function.
* dwarf_reader.h (Dwarf_die::address_attribute): Likewise.
* gdb-index.cc (Gdb_index_info_reader::record_cu_ranges): Handle
DW_AT_high_pc as offset from DW_AT_low_pc.
* testsuite/Makefile.am (gdb_index_test_3.sh): New test case.
* testsuite/Makefile.in: Regenerate.
* testsuite/gdb_index_test_3.c: New test source file.
* testsuite/gdb_index_test_3.sh: New test source file.
init_and_read_dies_worker. All callers updated.
(init_cu_and_read_dies, init_tu_and_read_dies): Delete. All calls
replaced with init_cutu_and_read_dies.
(load_partial_comp_unit): Pass 1 for use_existing_cu.
(find_partial_die): Remove FIXME. Don't free current CU.
testsuite/
* gdb.dwarf2/pr13961.S: New file.
* gdb.dwarf2/pr13961.exp: New file.
All callers updated.
(init_cu_die_reader): Verify the section is non-empty.
(dwarf_decode_line_header): Don't dereference section->asection
until we know the section is present.
* dwarf2dbg.c (DWARF2_ARANGES_VERSION): New define to 2.
(DWARF2_LINE_VERSION): Likewise.
(out_debug_line): Use DWARF2_LINE_VERSION not DWARF2_VERSION.
(out_debug_aranges): Use DWARF2_ARANGES_VERSION not DWARF2_VERSION.
(out_debug_abbrev): Use DW_FORM_data for DW_AT_high_pc when
DWARF2_VERSION >= 4.
(out_debug_info): Use difference between start and end as data
value for DW_AT_high_pc when DWARF2_VERSION >= 4.
* config/tc-ia64.h (DWARF2_LINE_VERSION): Override it.
* symfile.c (default_symfile_relocate): Use sectp->owner instead of
objfile->obfd.
* symfile.h (dwarf2_debug_sections): New member addr.
* dwarf2expr.c (execute_stack_op): New case DW_OP_GNU_addr_index.
(ctx_no_get_addr_index): New function.
* dwarf2expr.h (dwarf_expr_context_funcs): New member get_addr_index.
(ctx_no_get_addr_index): Declare.
* dwarf2-frame.c (dwarf2_frame_ctx_funcs): Update.
* dwarf2loc.c (dwarf_expr_get_addr_index): New function.
(dwarf_expr_ctx_funcs): Update.
(needs_get_addr_index): New function.
(needs_frame_ctx_funcs): Update.
* dwarf2loc.h (dwarf2_read_addr_index): Declare.
* dwarf2read.c: #include "gdbcore.h".
(dwarf2_per_objfile): New members addr, dwo_files.
(dwarf2_elf_names): Add entry for addr.
(struct dwo_section_names): New type.
(dwo_section_names): New static global.
(dwarf2_cu): New members dwo_unit, addr_base, have_addr_base.
(dwarf2_per_cu_data): New member is_debug_types, all boolean uses of
old debug_types_section member updated to use this.
Rename member debug_types_section to info_or_types_section,
all uses updated.
(signatured_type): Rename member type_offset to type_offset_in_tu,
all uses updated. New member type_offset_in_section.
(struct dwo_sections): New type.
(struct dwo_unit): New type.
(struct dwo_file): New type.
(die_reader_specs): New member dwo_file.
(dwarf2_locate_sections): Watch for .debug_addr.
(zlib_decompress_section): Use sectp->owner instead of objfile->obfd.
(dwarf2_read_section): Get bfd of section from bfd's asection,
instead of objfile.
(create_cus_from_index): Initialize the_cu->info_or_types_section.
(create_signatured_type_table_from_index): Initialize
sig_type->info_or_types_section.
(dw2_get_file_names): Statement lists for type units with DWO files
live in the DWO file.
(create_debug_types_hash_table): New function.
(create_all_type_units): Rewrite.
(init_cu_die_reader): New arg dwo_file, all callers updated.
(init_and_read_dies_worker): Get section from
this_cu->info_or_types_section. Set sig_type->type_offset_in_section.
Watch for DW_AT_GNU_dwo_name and if present lookup the file and
continue reading the CU/TU from there.
(init_cutu_and_read_dies_no_follow): New arg dwo_file, all callers
updated. Get section from this_cu->info_or_types_section.
(create_all_comp_units): Initialize this_cu->info_or_types_section.
(skip_one_die): New cases DW_FORM_GNU_addr_index,
DW_FORM_GNU_str_index.
(hash_dwo_file, eq_dwo_file): New functions.
(allocate_dwo_file_hash_table): New function.
(hash_dwo_unit, eq_dwo_unit): New functions.
(allocate_dwo_unit_table): New function.
(dwarf2_locate_dwo_sections): New function.
(struct create_dwo_info_table_data): New type.
(create_debug_info_hash_table_reader): New function.
(create_debug_info_hash_table): New function.
(try_open_dwo_file, open_dwo_file, init_dwo_file): New function.
(lookup_dwo_file): New function.
(lookup_dwo_comp_unit, lookup_dwo_type_unit): New functions.
(free_dwo_file, free_dwo_file_cleanup): New functions.
(free_dwo_file_from_slot, free_dwo_files): New functions.
(dwarf2_get_pc_bounds): Handle DW_FORM_GNU_addr_index.
(dwarf2_record_block_ranges): Ditto.
(read_partial_die): Ditto.
(process_enumeration_scope): Update to use type_offset_in_section.
(read_full_die_1): New function.
(read_full_die): Rewrite.
(read_attribute_value): New cases DW_FORM_GNU_addr_index,
DW_FORM_GNU_str_index.
(read_addr_index_1, read_addr_index): New functions.
(read_addr_index_from_leb128): New function.
(struct dwarf2_read_addr_index_data): New type.
(dwarf2_read_addr_index_reader): New function.
(dwarf2_read_addr_index): New function.
(read_str_index): New function.
(leb128_size): New function.
(dwarf_decode_line_header): Delete arg abfd, all callers updated.
If processing a type unit from a DWO file, get the line section
from the DWO file.
(var_decode_location): Watch for DW_OP_GNU_addr_index.
(dwarf2_const_value_attr): New cases DW_FORM_GNU_addr_index,
DW_FORM_GNU_str_index.
(lookup_die_type): Check whether section offset of type's die is
known before looking it up. Remove assert. Condition can
legimately happen for inter-cu type references.
(dwarf_attr_name): Handle Fission attributes.
(dwarf_form_name): Handle Fission forms.
(dump_die_shallow): New cases DW_FORM_GNU_addr_index,
DW_FORM_GNU_str_index.
(follow_die_sig): Update to use type_offset_in_section.
(decode_locdesc): New case DW_OP_GNU_addr_index.
(skip_form_bytes): New cases DW_FORM_GNU_addr_index,
DW_FORM_GNU_str_index.
(cu_debug_loc_section): New function.
(fill_in_loclist_baton, dwarf2_symbol_mark_computed): Call it.
(dwarf2_per_objfile_free): Unmap .debug_addr section.
Free DWO files if present.
* xcoffread.c (dwarf2_xcoff_names): Add .debug_addr.
testsuite/
* gdb.dwarf2/dw2-intercu.S (.Ltype_int2_in_cu2): Renamed from
.Ltype_int_in_cu2. Use name "int2" instead of "int".
All uses updated.
* gdb.dwarf2/dw2-intercu.exp: Add "ptype int2" ahead of
"ptype func_cu1" to expand cu2 before cu1.
* dwarf2read.c (dwarf2_per_objfile): Replace members
debug_info_type_hash and debug_types_type_hash with die_type_hash.
(die_reader_specs): New member "die_section". Temporarily make
member "buffer" non-const, pending constifying all info_ptr uses.
(die_reader_func_ftype): New typedef.
(dw2_get_file_names_reader): New function.
(dw2_get_file_names): Rewrite.
(read_and_check_type_unit_head): Rename arg type_offset to
type_offset_in_tu.
(create_all_type_units): Improve debugging message.
Improve dummy type unit check.
(init_cu_die_reader): New arg "section". All callers updated.
(init_and_read_dies_worker): New function.
(init_cu_and_read_dies, init_tu_and_read_dies): New functions.
(init_cutu_and_read_dies_no_follow): New function.
(init_cutu_and_read_dies_simple): New function.
(process_psymtab_comp_unit_reader): New function.
(process_psymtab_comp_unit): Delete args section,
is_debug_types_section. Rewrite. All callers updated.
(process_psymtab_type_unit): Renamed from process_type_comp_unit.
All callers updated. Rewrite.
(load_partial_comp_unit_reader): New function.
(load_partial_comp_unit): Rewrite.
(skip_children): New arg reader. Delete args buffer, cu.
All callers updated.
(skip_one_die): New arg reader. Delete args buffer, cu.
All callers updated.
(locate_pdi_sibling): New arg reader. Delete args buffer, abfd, cu.
All callers updated.
(load_full_comp_unit_reader): New function.
(load_full_comp_unit): Rewrite.
(read_comp_unit): Delete.
(read_die_and_children_1): Delete, contents moved ...
(read_die_and_children): ... here.
(dwarf2_read_abbrevs): New arg abbrev_section. All callers updated.
(load_partial_dies): New arg reader. Delete args abfd, buffer, cu.
All callers updated.
(read_partial_die): New arg reader. Delete args abfd, buffer, cu.
All callers updated.
(find_partial_die): Rewrite load_all_dies support.
(read_attribute_value): New arg reader. Delete args abfd, cu.
All callers updated.
(read_attribute): New arg reader. Delete args abfd, cu.
All callers updated.
(load_full_type_unit): Add assert.
(read_signatured_type_reader): New function.
(read_signatured_type): Rewrite.
(free_stack_comp_unit): Remove call to age_cached_comp_units.
(free_one_cached_comp_unit): Change target_cu arg to target_per_cu.
All callers updated. Set per_cu->cu = NULL after freeing it.
(dwarf2_per_cu_offset_and_type): Renamed from dwarf2_offset_and_type.
(per_cu_offset_and_type_hash): Renamed from offset_and_type_hash.
(per_cu_offset_and_type_eq): Renamed from offset_and_type_eq.
(set_die_type): Update.
(get_die_type_at_offset): Update.
(read_file_scope): Call prepare_one_comp_unit.
(read_type_unit_scope): Ditto.
(prepare_one_comp_unit): Set producer if present.
