The .except, .loader and .typchk are not mapped to memory,
so do not set their SEC_ALLOC flag.
bfd/ChangeLog:
* coffcode.h (styp_to_sec_flags) [RS6000COFF_C]: Add handling
of STYP_EXCEPT, STYP_LOADER and STYP_TYPCHK sections.
ld/testsuite/ChangeLog:
* ld-powerpc/aix-core-sec-1.hd, ld-powerpc/aix-core-sec-2.hd,
ld-powerpc/aix-core-sec-3.hd: Adjust expected section flags
for section .loader.
Currently, bfd does not compile with -Wunused-value because
the following code:
val = putc ('\n', f);
gets expanded into some code that triggers a warning:
warning: value computed is not used [-Wunused-value]
This is because putc is implemented as a macro...
>#define putc(__x, __p) (((!((__p)->_flag & 0xC000)) && \
> ((__p)->_flag = ((__p)->_flag & 0x3FFF) | 0x8000)),\
> (--(__p)->_cnt < 0 ? \
> __flsbuf((unsigned char) (__x), (__p)) : \
> (int) (*(__p)->_ptr++ = (unsigned char) (__x))))
It's the first part, before the coma operator, which triggers
the unused-value warning.
This patch fixes the issue by simply avoiding the macro and using
fputc instead.
bfd/ChangeLog:
* bfd.c (_bfd_default_error_handler): Replace use of putc
by fputc. Add comment explaining why.
bfd/ChangeLog:
2013-05-07 Will Newton <will.newton@linaro.org>
* elf-ifunc.c (_bfd_elf_allocate_ifunc_dyn_relocs): Add a
plt_header_size argument for ports where it differs from
plt_entry_size.
* elf-bfd.h: Likewise.
* elf32-i386.c: Pass plt_header_size to
_bfd_elf_allocate_ifunc_dyn_relocs.
* elf64-x86-64.c: Likewise.
hashes around loading as-needed library. Zero them on allocation,
and restore to initial all-zero state if library not needed.
Arrange to reuse hashes if we load library again later.
* config.bfd (msp430): Define targ_selvecs.
* configure.in: Add bfd_elf32_msp430_ti_vec.
* cpu-msp430.c: Add some more MSP430 machine numbers.
* elf32-msp430.c Add support for MSP430X relocations.
Add support for TI compiler generated relocations.
Add support for sym_diff relocations.
Add support for relaxing out of range short branches into long
branches.
Add support for MSP430 attribute section.
* reloc.c: Add MSP430X relocations.
* targets.c: Add bfd_elf32_msp430_ti_vec.
* bfd-in2.h: Regenerate.
* configure: Regenerate.
* libbfd.h: Regenerate.
* readelf.c: Add support for MSP430X architecture.
* readelf.exp: Expect -wi test to fail for the MSP430.
* config/tc-msp430.c: Add support for the MSP430X architecture.
Add code to insert a NOP instruction after any instruction that
might change the interrupt state.
Add support for the LARGE memory model.
Add code to initialise the .MSP430.attributes section.
* config/tc-msp430.h: Add support for the MSP430X architecture.
* doc/c-msp430.texi: Document the new -mL and -mN command line
options.
* NEWS: Mention support for the MSP430X architecture.
* gas/all/gas.exp: Skip the DIFF1 test for the MSP430.
Expect the FORWARD test to pass for the MSP430.
Skip the REDEF tests for the MSP430.
Expect the 930509A test to fail for the MSP430.
* gas/all/sleb128-4.d: Skip for the MSP430.
* gas/elf/elf.exp: Set target_machine to msp430 for the MSP430.
Skip the EHOPT0 test for the MSP430.
Skip the REDEF and EQU-RELOC tests for the MSP430.
* gas/elf/section2.e-msp430: New file.
* gas/lns/lns-big-delta.d: Remove expectation of 20-bit
addresses.
* gas/lns/lns.exp: Use alternate LNS COMMON test for the MSP430.
* gas/msp430/msp430x.s: New test.
* gas/msp430/msp430x.d: Expected disassembly.
* gas/msp430/msp430.exp: Run new test.
* gas/msp430/opcode.d: Update expected disassembly.
* msp430.h: Add MSP430X relocs.
Add some more MSP430 machine numbers.
Add values used by .MSP430.attributes section.
* msp430.h: Add patterns for MSP430X instructions.
* Makefile.am: Add emsp430X.c
* Makefine.in: Regenerate.
* configure.tgt (msp430): Add msp430X emulation.
* ldmain.c (multiple_definition): Only disable relaxation if it
was enabled by the user.
* ldmain.h (RELAXATION_ENABLED_BY_USER): New macro.
* emulparams/msp430all.sh: Add support for MSP430X.
* emultempl/generic.em: (before_parse): Enable relaxation for the
MSP430.
* scripttempl/msp430.sc: Reorganize sections. Add .rodata
section.
* scripttempl/msp430_3.sc: Likewise.
* NEWS: Mention support for MSP430X.
* ld-elf/flags1.d: Expect this test to pass on the MSP430.
* ld-elf/init-fini-arrays.d: Expect this test to fail on the
MSP430.
* ld-elf/merge.d: Expect this test to pass on the MSP430.
* ld-elf/sec64k.exp: Skip these tests for the MSP430.
* ld-gc/pr13683.d: Expect this test to fail on the MSP430.
* ld-srec/srec.exp: Expect these tests to fail on the MSP430.
* ld-undefined/undefined.exp: Expect the UNDEFINED LINE test to
fail on the MSP430.
* msp430-dis.c: Add support for MSP430X instructions.
* config.bfd: Replace alpha*-*-linuxecoff* pattern with
alpha*-*-linux*ecoff*.
binutils/testsuite/
* lib/binutils-common.exp (is_elf_format): Also exclude
*-*-linux*ecoff*.
gas/
* configure.tgt: Replace alpha*-*-linuxecoff* pattern with
alpha*-*-linux*ecoff*.
ld/
* configure.tgt: Replace alpha*-*-linuxecoff* pattern with
alpha*-*-linux*ecoff*. Update the `sed' pattern used to convert
from alpha*-*-linux-* to alpha*-*-linux*ecoff*.
This patch enables x32 for x86_64-*-elf* for embedded target and disables
rex tests since it uses '/' as prefix separator which is `\' for
x86_64-*-elf*.
bfd/
* config.bfd (targ_selvecs): Add bfd_elf32_x86_64_vec for
x86_64-*-elf*.
gas/testsuite/
* gas/i386/rex.d: Skip x86_64-*-elf*.
* gas/i386/ilp32/rex.d: Likewise.
ld/
* configure.tgt (targ_extra_emuls): Adds elf32_x86_64 for
x86_64-*-elf*.
(targ_extra_libpath): Likewise.
(tdir_elf_i386): Replace x86_64 with i386 for x86_64-*-elf*.
* elf32-arm.c (elf32_arm_allocate_plt_entry): If HTAB->nacl_p,
allocate space for PLT header even if IS_IPLT_ENTRY.
(arm_nacl_put_plt0): New function, broken out of ...
(elf32_arm_finish_dynamic_sections): ... here. Call it.
If HTAB->nacl_p, set up the PLT header in .iplt too.
(elf32_arm_output_arch_local_syms): If HTAB->nacl_p, write
a mapping symbol for the start of .iplt too.
Cary Coutant
Tristan Gingold
Alan Modra
Andreas Schwab
Joel Brobecker
Will Newton
Catherine Moore
Richard Sandiford
Nick Clifton
Maciej W. Rozycki
H.J. Lu
Roland McGrath