(AC_CHECK_HEADERS): Check for sys/time.h
(AC_HEADER_TIME): Add macro.
* configure: Rebuild.
* sysdep.h: Use TIME_WITH_SYS_TIME and HAVE_SYS_TIME_H
to control what combination of <time> and <sys/time.h>
get included.
Alan Modra <alan@spri.levels.unisa.edu.au>:
* configure.in: Add AC_ARG_ENABLE for shared and commonbfdlib.
New substitutions: ALLLIBS, PICFLAG, SHLIB, SHLIB_CC,
SHLIB_CFLAGS, COMMON_SHLIB, PICLIST, SHLINK.
* configure: Rebuild.
* configure.host: If --enable-shared, adjust shared library stuff
based on the host. If the host is SunOS, and the linker supports
-rpath, set HLDFLAGS to use it.
* Makefile.in (ALLLIBS): New variable.
(PICFLAG, SHLIB, SHLIB_CC, SHLIB_CFLAGS): New variables.
(COMMON_SHLIB, SHLINK): New variables.
(.c.o): If PICFLAG is set, compile twice, once PIC, once normal.
(STAGESTUFF): Remove variable.
(all): Depend upon $(ALLLIBS) and @PICLIST@ rather than
$(TARGETLIB).
(stamp-ofiles): New target, like old ofiles target, but build
using a temporary file and move-if-change, and touch stamp-ofiles
when done.
(ofiles): Just depend upon stamp-ofiles.
(stamp-piclist, piclist): New targets.
($(SHLIB), $(SHLINK)): New targets.
(targets.o, archures.o): Build twice if PICFLAG is set.
(do_mostlyclean): Remove pic/*.o.
(do_clean): Remove stamp-ofiles, $(SHLIB), $(SHLINK), piclist, and
stamp-piclist.
(do_distclean): Remove pic and stamp-picdir.
(install): Install shared libraries.
($(OFILES)): Depend upon stamp-picdir.
(stamp-picdir): New target.
Added some new interfaces, and a new entry in the target vector. Under the new
interfaces, mmap will be used if available, otherwise malloc/seek/read, as
before. Old interfaces all still intact.
Most configurations (including all used by "--enable-targets=all") simply
changed to call the default routine for that entry in the target vector. I
might've missed some targets only included in special configurations.
Support for a.out symbol and string table reading now goes through new
interfaces, and will use mmap when available.
Linker hooks (e.g., avoiding reallocation under malloc) not ready yet.
* coff-m88k.c (rtype2howto): New static function.
(RTYPE2HOWTO): Use it rather than a macro definition.
* coffcode.h (coff_write_object_contents): set internal_a.magic
to PAGEMAGICPEXECPAGED #if defined (M68) && !defined (LYNXOS).
* configure.in: m68*-motorola-sysv3* does not use ptrace-core.o;
define TRAD_HEADER to new file hosts/delta68.h.
m88*-motorola-sysv*, however, does use ptrace-core.o.
* hosts/delta68.h: New file.
* ptrace-core.c (ptrace_unix_core_file_p): change bfd_zmalloc to
bfd_zalloc; provide proper parm abfd to calls to bfd_zalloc.
* configure.in (alpha*-*-linux*): Set COREFILE to trad-core.o and
define TRAD_HEADER as hosts/alphalinux.h.
* configure: Rebuild.
* hosts/alphalinux.h: New file.
* trad-core.c (trad_unix_core_file_p): Cast u.u_ar0 to bfd_vma,
not int.
* configure: Rebuild.
* mpw-config.in: Add xcofflink.c.o to powerpc-apple-macos.
* coff-pmac.c: Include coff-rs6000.c instead of duplicating its
contents.
(pmac_xcoff_vec): Update to use new xcoff support.
* coff-rs6000.c (xcoff_generic_stat_arch_elt): Make static.
(xcoff_write_armap): Declare buf as unsigned char.
* xcofflink.c (xcoff_link_add_symbols): Declare a local as PTR.
* mpw-make.sed: Generalize subdir_do edit.
* configure, configure.in: Add pmac_xcoff_vec case.
* Makefile.in (BFD32_BACKENDS): Add coff-pmac.o.
* coff-pmac.c: New file, PowerMac XCOFF support.
* coffcode.h (coff_set_arch_mach_hook): Add PowerMac case.
* targets.c (pmac_xcoff_vec): Declare.
* mpw-config.in: Various changes to be compatible with the
autoconf-based configury.
* mpw-make.sed: New file, sed commands to translate Unix
makefile into MPW syntax.
* mpw-make.in: Remove.
* hosts/mpw.h: Remove.
* bfd-in.h, bfd-in2.h: If MPW, include the file that defines
true and false as enums, then define TRUE_FALSE_ALREADY_DEFINED.
* archures.c: Reindent many functions. Change CONST to const.
(bfd_arch_info_type): Make arch_name const. Remove disassemble;
nothing set it anyhow. Make next const.
(bfd_arch_info_list): Remove.
(bfd_archures_list): Rename from archures_init_table. Change from
a table of function pointers to a table of bfd_arch_info_type
structure addresses.
(bfd_scan_arch): Rewrite accordingly. Return a const pointer.
(bfd_lookup_arch): Likewise.
(bfd_set_arch_info): Rewrite accordingly. Change argument to be a
const pointer.
(bfd_default_arch_struct): Make const.
(bfd_arch_init, bfd_arch_linkin): Remove.
(bfd_get_arch_info): Return a const pointer.
* init.c (bfd_init): Don't call bfd_arch_init.
* bfd.c (struct _bfd): Make arch_info const.
* bfd-in2.h: Rebuild.
* libbfd.h: Rebuild.
* configure.in: Put & before everything in $selarchs.
* configure: Rebuild.
* cpu-*.c: Change bfd_*_arch from a function which calls
bfd_arch_linkin to a const structure.
* ieee.c (ieee_object_p): Make arch const.
* coff-i960.c (coff_i960_relocate): Use a coff_section_data
structure to store the symbol being used.
(coff_i960_start_final_link): New static function.
(coff_i960_relocate_section): New static function.
(coff_i960_adjust_symndx): New static function.
(coff_start_final_link): Define.
(coff_relocate_section): Define.
(coff_adjust_symndx): Define.
* coffcode.h (bfd_coff_backend_data): Add new callback function
_bfd_coff_start_final_link.
(bfd_coff_start_final_link): Define.
(coff_start_final_link): Define if not defined.
(bfd_coff_std_swap_table): Add coff_start_final_link.
* cofflink.c (_bfd_coff_internal_syment_name): Make globally
visible.
(_bfd_coff_final_link): Call bfd_coff_start_final_link if the
function callback is not NULL.
* libcoff-in.h (struct coff_section_tdata): Add tdata field.
(_bfd_coff_internal_syment_name): Declare.
* libcoff.h: Rebuild.
* configure.in (icoff_big_vec): Add cofflink.o.
(icoff_little_vec): Likewise.
* configure: Rebuild.
* configure.in: Call AC_CONFIG_HEADER with config.h:config.in.
* configure: Rebuild.
* Makefile.in (stamp-h): Set CONFIG_HEADERS to config.h:config.in
when calling config.status.
HOST_64BIT_LONG. Check that various header files exist. Check
that fcntl exists. Call BFD_BINARY_FOPEN. Check whether malloc
and/or free need to be declared. Don't make a link to sysdep.h.
Define TRAD_HEADER for various hosts.
* configure: Rebuild.
* configure.host: Don't set my_host. Add definitions taken from
host header files for various entries. Remove entries which now
do nothing.
* acconfig.h: New file.
* config.h.in: New file, built by autoheader.
* sysdep.h: New file.
* Makefile.in (do_distclean): Don't remove sysdep.h.
(RECONFIG): Remove.
(LOCAL_H_DEPS): New variable.
($(BFD_LIBS)): Use $(LOCAL_H_DEPS) rather than libbfd.h and
$(RECONFIG).
($(BFD_MACHINES), $(BFD_BACKENDS)): Likewise.
($(OPTIONAL_BACKENDS)): Likewise.
(stmp-bfd.h): Just substitute for BFD_HOST_64BIT_LONG, rather than
looking through sysdep.h.
* bfd-in.h (BFD_HOST_64BIT_LONG): Define; set by Makefile.
(BFD_HOST_64_BIT): Define based on BFD_HOST_64BIT_LONG.
(fprintf_vma, sprintf_vma): Likewise.
(int64_type, uint64_type): Don't define.
* bfd-in2.h: Rebuild.
* archures.c, bfd.c, srec.c: Include <ctype.h>.
* elfcore.h: Check HAVE_SYS_PROCFS_H rather than HAVE_PROCFS.
* lynx-core.c: Include stuff from old hosts/lynx.h.
* opncls.c (bfd_fdopenr): Check HAVE_FNCTL and defined (F_GETFL),
rather than NO_FCNTL.
* targets.c (bfd_target_list): Check HOST_HPPAHPUX and ! __STDC__
rather than NATIVE_HPPAHPUX_COMPILER.
* trad-core.c: Don't include <errno.h>. Include TRAD_HEADER if it
is defined.
* hosts/*.h: Remove all header files which merely include,
declare, and define things. Leave header files which define
information needed by trad-core.c.
shell variables.
* configure.in: Call AC_PROG_CC. Substitute CFLAGS, HDEFINES and
AR. Call AC_PROG_INSTALL. Substitute CC_FOR_BUILD, choosing a
value based on whether the code is being compiled by a cross
compiler. Don't substitute host_makefile_frag or frags.
* aclocal.m4: New file to define local AC_PROG_CC.
* configure: Rebuild.
* Makefile.in (INSTALL): Set to @INSTALL@.
(INSTALL_PROGRAM): Set to @INSTALL_PROGRAM@.
(INSTALL_DATA): Set to @INSTALL_DATA@.
(AR): Set to @AR@.
(CC): Define as @CC@.
(CFLAGS): Set to @CFLAGS@.
(CC_FOR_BUILD): Set to @CC_FOR_BUILD@.
(@host_makefile_frag@): Remove.
(ALL_CFLAGS): Change $(HDEFINES) to @HDEFINES@. Move $(CFLAGS)
after other options.
(config.status): Remove dependency upon @frags@.
* config/*.mh, config/README: Remove.
fragments by setting shell variables, rather than merely returning
the name of a Makefile fragment.
* configure.in: Use shell variables set by config.bfd rather than
looking at the target Makefile fragment files. Don't substitute
target_makefile_frag. Do substitute TDEFINES.
* configure: Rebuild.
* Makefile.in (@target_makefile_frag@): Remove.
(ALL_CFLAGS): Change $(TDEFINES) to @TDEFINES@.
* config/*.mt: Remove.
Mon Sep 30 15:13:46 1991 Steve Chamberlain (steve at cygnus.com)
* cpu-a29k.c, cpu-i386.c, cpu-m68k.c, cpu-mips.c, cpu-vax.c,
cpu-h8300.c, cpu-i960.c, cpu-m88k.c, cpu-sparc.c: added. These
files will eventually contain processor specific bits for bfd,
like strange relocation information and dis/assembly. So far only
the H8 has been even partially done. This work also ties in with
the change in handling architectures.
* amdcoff.c: (a29k_reloc) fix error message.
* aout-f1.h: (choose_reloc_size) now calls bfd_get_arch to
discover the architecture of the bfd. (sunos4_callback) calls the
function bfd_set_arch_mach rather than stuffing stuff directly
into the bfd. (sunos4_write_object_contents), changed names of
accessor functions.
* aoutx.h: (set_arch_mach) now calls bfd_default_set_arch_mach to
setup the environment.
* archive.c: (bfd_slurp_coff_armap) coff archives always have the
headers in big endian format, regardless of the endianess of the
host or target.
* archures.c: totally changed. Now an architecture is represented
with a pointer to an info structure rather than an enumerated type
and a long. The old info is available as two elements in the
structure. Future enhancements to architecure support will
involve pointers to methods being placed into the info structure.
* bfd.c: changed the definition of the bfd structure for the new
architecture stuff.
* bout.c: (b_out_set_arch_mach) changed to use the new
architecture mechanism.
* coffcode.h: (coff_set_arch_mach, coff_set_flags) changed to use
the new architecture mechanism.
* configure.in: added h8 stuff.
* ieee.c: too many changes to note. Now ieee files written with
bfd gas and ld can be read by gld and ieee only linkers and
simulators.
* libbfd.c, libbfd.h: changed prototype of bfd_write.
* newsos3.c: (newos3_callback) now calls bfd_set_arch_mach rather
than fixing the structure directly.
* oasys.c: (oasys_object_p) now calls bfd_default_set_arch_mach rather
than fixing the structure directly.
* opncls.c: (new_bfd) makes sure that bfd_init has been called
before opening a bfd.
* srec.c: (srec_set_arch_mach) now calls bfd_default_set_arch_mach
rather than fixing the structure directly.
* targets.c: (target_vector) now by defining SELECT_VECS (perhaps
in the t/hmake file) a user can select which backends they want
linked with bfd without changing the source.
* init.c: new, looks after initializing modules.
* howto.c: for future use, will allow an application to work out
what cookie to use as a handle on a relcoatio howto.
