Prior to the patch, addends for relocs were being adjusted even if
they went beyond an alignment boundary. This is wrong - to
preserve alignment constraints, the relaxation logic adds as many padding
bytes at the alignment boundary as was deleted, so addends beyond the
boundary should not be adjusted. avr-prop-7.s reproduces this
scenario.
Also, prior to this patch, the relaxation logic assumed that the addr
parameter pointed to the middle of the instruction to be deleted, and
that addr - count would therefore be the shrinked instruction's
address. This is true when actually shrinking instructions.
The alignment constraints handling logic also invokes the same logic
though, with addr as the starting offset of padding bytes and
with count as the number of bytes to be deleted. Calculating the
shrinked insn's address as addr - count is obviously wrong in this
case - that offset would point to count bytes before the last
non-padded byte. avr-prop-8.s reproduces this scenario.
To fix scenario 1, the patch adds an additional check to ensure reloc addends
aren't adjusted if they cross a shrink boundary. The shrink boundary
is either the section size or an alignment boundary. Addends pointing
at an alignment boundary don't need to be adjusted, as padding would
occur and keep the boundary the same. Addends pointing at section size
need to be adjusted though, as no padding occurs and the section size
itself would get decremented. The patch records whether padding
occured (did_pad) and uses that to detect and handle this condition.
To fix scenario 2, the patch adds an additional parameter
(delete_shrinks_insn) to elf32_avr_relax_delete_bytes to distinguish
instruction bytes deletion from padding bytes deletion. It then uses that to
correctly set shrinked_insn_address.
bfd/ChangeLog:
2016-09-02 Senthil Kumar Selvaraj <senthil_kumar.selvaraj@atmel.com>
PR ld/20545
* elf32-avr.c (elf32_avr_relax_delete_bytes): Add parameter
delete_shrinks_insn. Modify computation of shrinked_insn_address.
Compute shrink_boundary and adjust addend only if
addend_within_shrink_boundary.
(elf32_avr_relax_section): Modify calls to
elf32_avr_relax_delete_bytes to pass extra parameter.
ld/ChangeLog:
2016-09-02 Senthil Kumar Selvaraj <senthil_kumar.selvaraj@atmel.com>
PR ld/20545
* testsuite/ld-avr/avr-prop-7.d: New test.
* testsuite/ld-avr/avr-prop-7.s: New test.
* testsuite/ld-avr/avr-prop-8.d: New test.
* testsuite/ld-avr/avr-prop-8.s: New test.
ld/ChangeLog:
Cupertino Miranda <cmiranda@synopsys.com>
* testsuite/ld-arc/tls_gs-01.d: Set to XFAIL on arc*-*-elf*.
* testsuite/ld-arc/tls_ie-01.d: Likewise.
On i386, IFUNC function must be called via PLT. Since PLT in PIC
object uses EBX register, R_386_PLT32 relocation must be used to
call IFUNC function even when IFUNC function is defined locally.
Linker should issue an error when R_386_PC32 relocation is used
to call IFUNC function.
Since PR ld/19784 tests doesn't use PLT relocation to local IFUNC
function, they are moved to the x86-64 test directory.
bfd/
PR ld/14961
PR ld/20515
* elf32-i386.c (elf_i386_check_relocs): Issue an error when
R_386_PC32 relocation is used to call IFUNC function in PIC
object.
ld/
PR ld/14961
PR ld/20515
* testsuite/ld-i386/i386.exp: Run pr20515.
* testsuite/ld-i386/pr20515.d: New file.
* testsuite/ld-i386/pr20515.s: Likewise.
* testsuite/ld-ifunc/ifunc-14a.s: Use R_386_PLT32 to call IFUNC
function.
* testsuite/ld-ifunc/ifunc-14c.s: Likewise.
* testsuite/ld-ifunc/ifunc-2-i386.s: Likewise.
* testsuite/ld-ifunc/ifunc-2-local-i386.s: Likewise.
* testsuite/ld-ifunc/ifunc.exp: Move PR ld/19784 tests to ...
* testsuite/ld-x86-64/x86-64.exp: Here.
* testsuite/ld-ifunc/pr19784a.c: Moved to ...
* testsuite/ld-x86-64/pr19784a.c: Here.
* testsuite/ld-ifunc/pr19784b.c: Moved to ...
* testsuite/ld-x86-64/pr19784b.c: Here.
* testsuite/ld-ifunc/pr19784c.c: Moved to ...
* testsuite/ld-x86-64/pr19784c.c: Here.
2016-08-26 Thomas Preud'homme <thomas.preudhomme@arm.com>
bfd/
* bfd-in.h (struct elf32_arm_params): Define.
(bfd_elf32_arm_set_target_relocs): Rename into ...
(bfd_elf32_arm_set_target_params): This. Use a struct
elf32_arm_params to pass all parameters but the bfd and bfd_link_info.
* bfd-in2.h: Regenerate.
* elf32-arm.c (bfd_elf32_arm_set_target_relocs): Rename into ...
(bfd_elf32_arm_set_target_params): This. Pass all values via a struct
elf32_arm_params rather than as individual parameters.
ld/
* emultempl/armelf.em (params): New static variable.
(thumb_entry_symbol, byteswap_code, target1_is_rel, target2_type,
fix_v4bx, use_blx, vfp11_denorm_fix, stm32l4xx_fix, fix_cortex_a8,
no_enum_size_warning, no_wchar_size_warning, pic_veneer,
merge_exidx_entries, fix_arm1176, cmse_implib): move as part of the
above new structure.
(arm_elf_before_allocation): Access static variable from the params
structure.
(gld${EMULATION_NAME}_finish): Likewise.
(arm_elf_create_output_section_statements): Likewise and pass the
address of that structure to bfd_elf32_arm_set_target_relocs instead
of the static variables.
(PARSE_AND_LIST_ARGS_CASES): Access static variable from the params
structure.
Forgot to set should_relocate to TRUE in case of GOT and TLS relocations of
undefined symbols for shared libraries.
In dynamic libraries if symbol is not known the instruction relocation would
not be resolved to point to the respective .got entry.
A test was created to detect similar future mistakes.
bfd/ChangeLog:
Cupertino Miranda <cmiranda@synopsys.com>
* elf32-arc.c (elf_arc_relocate_section): Changed. Set should_relocate
to TRUE for GOT and TLS relocs.
ld/ChangeLog:
Cupertino Miranda <cmiranda@synopsys.com>
* ld/testsuite/ld-arc/tls_gd-01.s: Added a testcase for this patch.
* ld/testsuite/ld-arc/tls_gd-01.d: Likewise.
When no dynamic relocation was generated the .got content would not be
updated for the TLS_IE_GOT relocation addresses.
bfd/ChangeLog:
Cupertino Miranda <cmiranda@synopsys.com>
* arc-got.h (relocate_fix_got_relocs_for_got_info): Fixed addresses in
debug comments. Fixed address in .got related to TLS_IE_GOT dynamic
relocation.
ld/ChangeLog:
Cupertino Miranda <cmiranda@synopsys.com>
* testsuite/ld-arc/tls_ie-01.s: Added to verify associated fix.
* testsuite/ld-arc/tls_ie-01.d: Likewise
2016-08-26 Thomas Preud'homme <thomas.preudhomme@arm.com>
bfd/
* bfd-in.h (bfd_elf32_arm_set_target_relocs): Add a new parameter for
the input import library bfd.
* bfd-in2.h: Regenerate.
* elf32-arm.c (struct elf32_arm_link_hash_table): New in_implib_bfd
and new_cmse_stub_offset fields.
(stub_hash_newfunc): Initialize stub_offset and stub_template_size to
-1.
(elf32_arm_add_stub): Likewise for stub_offset.
(arm_new_stubs_start_offset_ptr): New function.
(arm_build_one_stub): Only allocate a stub_offset if it is -1. Allow
empty SG veneers to have zero relocations.
(arm_size_one_stub): Only initialize stub size and template
information for non empty veneers. Do not update veneer section size
if veneer already has an offset.
(elf32_arm_create_stub): Return the stub entry pointer or NULL instead
of a boolean indicating success or failure.
(cmse_scan): Change stub_changed parameter into an integer pointer
parameter cmse_stub_created to count the number of stub created and
adapt to change of return value in elf32_arm_create_stub.
(cmse_entry_fct_p): New function.
(arm_list_new_cmse_stub): Likewise.
(set_cmse_veneer_addr_from_implib): Likewise.
(elf32_arm_size_stubs): Define cmse_stub_created, pass its address to
cmse_scan instead of that of cmse_stub_changed to compute the number
of stub created and use it to initialize stub_changed. Call
set_cmse_veneer_addr_from_implib after all cmse_scan. Adapt to change
of return value in elf32_arm_create_stub. Use
arm_stub_section_start_offset () if not NULL to initialize size of
secure gateway veneers section. Initialize stub_offset of Cortex-A8
erratum fix to -1. Use ret to hold return value.
(elf32_arm_build_stubs): Use arm_stub_section_start_offset () if not
NULL to initialize size of secure gateway veneers section. Adapt
comment to stress the importance of zeroing veneer section content.
(bfd_elf32_arm_set_target_relocs): Add new in_implib_bfd parameter to
initialize eponymous field in struct elf32_arm_link_hash_table.
ld/
* emultempl/armelf.em (in_implib_filename): Declare and initialize new
variable.
(arm_elf_create_output_section_statements): Open import input library
file for writing and pass resulting in_implib_bfd to
bfd_elf32_arm_set_target_relocs.
(PARSE_AND_LIST_PROLOGUE): Define OPTION_IN_IMPLIB option.
(PARSE_AND_LIST_LONGOPTS): Define --in-implib option.
(PARSE_AND_LIST_OPTIONS): Add help message for --in-implib option.
(PARSE_AND_LIST_ARGS_CASES): Handle new OPTION_IN_IMPLIB case.
* ld.texinfo (--cmse-implib): Update to mention --in-implib.
(--in-implib): Document new option.
* NEWS: Likewise.
* testsuite/ld-arm/arm-elf.exp
(Secure gateway import library generation): add --defsym VER=1 to gas
CLI.
(Secure gateway import library generation: errors): Likewise.
(Input secure gateway import library): New test.
(Input secure gateway import library: no output import library):
Likewise.
(Input secure gateway import library: not an SG input import library):
Likewise.
(Input secure gateway import library: earlier stub section base):
Likewise.
(Input secure gateway import library: later stub section base):
Likewise.
(Input secure gateway import library: veneer comeback): Likewise.
(Input secure gateway import library: entry function change):
Likewise.
* testsuite/ld-arm/cmse-implib.s: Add input import library testing.
* testsuite/ld-arm/cmse-implib.rd: Update accordingly.
* testsuite/ld-arm/cmse-new-implib.out: New file.
* testsuite/ld-arm/cmse-new-implib.rd: Likewise.
* testsuite/ld-arm/cmse-new-implib-no-output.out: Likewise.
* testsuite/ld-arm/cmse-new-implib-not-sg-in-implib.out: Likewise.
* testsuite/ld-arm/cmse-new-earlier-later-implib.out: Likewise.
* testsuite/ld-arm/cmse-new-comeback-implib.rd: Likewise.
* testsuite/ld-arm/cmse-new-wrong-implib.out: Likewise.
This fixes a few problems in the powerpc ld configury.
1) Using powerpc*le-* to test for powerpcle and powerpc64le would
incorrectly match a target triple like powerpc-apple-elf.
2) In the same vein, *64* could match 64 in the user supplied MANUF-OS
part of the target triple.
3) tooldir vars were missing, and some target aliases would result in
ridiculous values for those tdir_* vars given.
4) Since 2016-04-25, BE support was added automatically when asking
for an LE target. If that is a good idea, then so is adding LE
support when asking for BE.
* configure.tgt (powerpc*-*-linux* et al): Rewrite, adding LE
support for BE. First output all target endian configury
values, then opposite endian. Handle more tooldirs. Fix
bogus matches with strings in MANUF-OS part of target triple.
* testsuite/ld-undefined/weak-fundef.s: New.
* testsuite/ld-undefined/weak-undef.t: Don't specify filename.
* testsuite/ld-undefined/weak-undef.exp: Run new tests. Rearrange
much of old code. Use is_elf_format to select targets.
PR ld/20436
* testsuite/lib/ld-lib.exp (check_gcc_plugin_enabled): When not
testing remotely, check to see if target compiler is installed
before trying to run it.
Complement commit b75d42bce5 ("Fix mips segfault on GOT access of
absolute symbol") and unmark the `__ehdr_start' test 2 as known to fail
for the n32 and n64 ABIs, as with the change referred in place the
causing issue has been properly addressed and consequently the tests do
not fail anymore and neither are supposed to.
ld/
PR ld/15428
* testsuite/ld-mips-elf/mips-elf.exp: Un-KFAIL `__ehdr_start'
test 2.
Repeat `PIC and non-PIC test 1' checks for microMIPS LA25 stubs,
covering code generation and stub symbol annotation.
ld/
* testsuite/ld-mips-elf/pic-and-nonpic-1-micromips-rel.dd: New
test.
* testsuite/ld-mips-elf/pic-and-nonpic-1-micromips-rel.nd: New
test.
* testsuite/ld-mips-elf/pic-and-nonpic-1-micromips.dd: New test.
* testsuite/ld-mips-elf/pic-and-nonpic-1-micromips.nd: New test.
* testsuite/ld-mips-elf/pic-and-nonpic-1a-micromips.s: New test
source.
* testsuite/ld-mips-elf/pic-and-nonpic-1b-micromips.s: New test
source.
* testsuite/ld-mips-elf/mips-elf.exp: Run the new tests.
Don't run LTO tests if compiler is configured with --disable-plugin.
PR ld/20436
* testsuite/lib/ld-lib.exp (check_gcc_plugin_enabled): New
proc.
(check_lto_available): Return 0 if check_gcc_plugin_enabled
returns 0.
(check_lto_fat_available): Likewise.
(check_lto_shared_available): Likewise.
bfd/
* elf32-arm.c (CMSE_PREFIX): Define macro.
(elf32_arm_stub_cmse_branch_thumb_only): Define stub sequence.
(cmse_branch_thumb_only): Declare stub.
(struct elf32_arm_link_hash_table): Define cmse_stub_sec field.
(elf32_arm_get_plt_info): Add globals parameter. Use it to return
FALSE if there is no PLT.
(arm_type_of_stub): Adapt to new elf32_arm_get_plt_info signature.
(elf32_arm_final_link_relocate): Likewise.
(elf32_arm_gc_sweep_hook): Likewise.
(elf32_arm_gc_mark_extra_sections): Mark sections holding ARMv8-M
secure entry functions.
(arm_stub_is_thumb): Add case for arm_stub_cmse_branch_thumb_only.
(arm_dedicated_stub_output_section_required): Change to a switch case
and add a case for arm_stub_cmse_branch_thumb_only.
(arm_dedicated_stub_output_section_required_alignment): Likewise.
(arm_stub_dedicated_output_section_name): Likewise.
(arm_stub_dedicated_input_section_ptr): Likewise and remove
ATTRIBUTE_UNUSED for htab parameter.
(arm_stub_required_alignment): Likewise.
(arm_stub_sym_claimed): Likewise.
(arm_dedicated_stub_section_padding): Likewise.
(cmse_scan): New function.
(elf32_arm_size_stubs): Call cmse_scan for ARM M profile targets.
Set stub_changed to TRUE if such veneers were created.
(elf32_arm_swap_symbol_in): Add detection code for CMSE special
symbols.
include/
* arm.h (ARM_GET_SYM_CMSE_SPCL): Define macro.
(ARM_SET_SYM_CMSE_SPCL): Likewise.
ld/
* ld.texinfo (Placement of SG veneers): New concept entry.
* testsuite/ld-arm/arm-elf.exp
(Secure gateway veneers: no .gnu.sgstubs section): New test.
(Secure gateway veneers: wrong entry functions): Likewise.
(Secure gateway veneers (ARMv8-M Baseline)): Likewise.
(Secure gateway veneers (ARMv8-M Mainline)): Likewise.
* testsuite/ld-arm/cmse-veneers.s: New file.
* testsuite/ld-arm/cmse-veneers.d: Likewise.
* testsuite/ld-arm/cmse-veneers.rd: Likewise.
* testsuite/ld-arm/cmse-veneers.sd: Likewise.
* testsuite/ld-arm/cmse-veneers-no-gnu_sgstubs.out: Likewise.
* testsuite/ld-arm/cmse-veneers-wrong-entryfct.out: Likewise.
Convert microMIPS branches and jumps whose delay slot would be filled by
a generated NOP instruction to the corresponding compact form where one
exists, in a manner similar to MIPS16 JR->JRC and JALR->JALRC swap.
Do so even where the transformation switches from a 16-bit to a 32-bit
branch encoding for no benefit in code size reduction, as this is still
advantageous. This is because a branch/NOP pair takes 2 pipeline slots
or a 2-cycle completion latency except in superscalar implementations.
Whereas a compact branch may or may not stall on its target fetch, so it
will at most have a 2-cycle completion latency and may have only 1 even
in scalar implementations, and in superscalar implementations it is
expected to have no worse latency as a branch/NOP pair has. Also it
won't stall and therefore take the extra latency cycle in the not-taken
case.
Technically this is the same as MIPS16 compaction: for the qualifying
instruction encodings the APPEND_ADD_COMPACT machine code generation
method is selected where APPEND_ADD_WITH_NOP otherwise would and tells
the code generator in `append_insn' to convert the regular form of an
instruction to its corresponding compact form. For this the opcode is
tweaked as necessary and the microMIPS opcode table is scanned for the
matching updated instruction. A non-$0 `rt' operand to BEQ and BNE
instructions is moved to the `rs' operand field of BEQZC and BNEZC
encodings as required.
Unlike with MIPS16 compaction however we need to handle out-of-distance
branch relaxation as well. We do this by deferring the generation of
any delay-slot NOP required to relaxation made in `md_convert_frag', by
converting the APPEND_ADD_WITH_NOP machine code generation to APPEND_ADD
where a relaxed instruction is recorded. Relaxation then, depending on
actual code produced, chooses between either using a compact branch or
jump encoding and emitting the NOP outstanding if no compact encoding is
possible.
For code simplicity's sake the relaxation pass is retained even if the
principle of preferring a compact encoding to a 16-bit branch/NOP pair
means, in the absence of out-of-range branch relaxation, that a single
compact branch machine code instruction will eventually be produced from
a given assembly source instruction.
gas/
* config/tc-mips.c (RELAX_MICROMIPS_ENCODE): Add `nods' flag.
(RELAX_MICROMIPS_RELAX32, RELAX_MICROMIPS_TOOFAR16)
(RELAX_MICROMIPS_MARK_TOOFAR16, RELAX_MICROMIPS_CLEAR_TOOFAR16)
(RELAX_MICROMIPS_TOOFAR32, RELAX_MICROMIPS_MARK_TOOFAR32)
(RELAX_MICROMIPS_CLEAR_TOOFAR32): Shift bits.
(get_append_method): Also return APPEND_ADD_COMPACT for
microMIPS instructions.
(find_altered_mips16_opcode): Exclude macros from matching.
Factor code out...
(find_altered_opcode): ... to this new function.
(find_altered_micromips_opcode): New function.
(frag_branch_delay_slot_size): Likewise.
(append_insn): Handle microMIPS branch/jump compaction.
(macro_start): Likewise.
(relaxed_micromips_32bit_branch_length): Likewise.
(md_convert_frag): Likewise.
* testsuite/gas/mips/micromips.s: Add conditional explicit NOPs
for delay slot filling.
* testsuite/gas/mips/micromips-b16.s: Add explicit NOPs for
delay slot filling.
* testsuite/gas/mips/micromips-size-1.s: Likewise.
* testsuite/gas/mips/micromips.l: Adjust line numbers.
* testsuite/gas/mips/micromips-warn.l: Likewise.
* testsuite/gas/mips/micromips-size-1.l: Likewise.
* testsuite/gas/mips/micromips.d: Adjust padding.
* testsuite/gas/mips/micromips-trap.d: Likewise.
* testsuite/gas/mips/micromips-insn32.d: Likewise.
* testsuite/gas/mips/micromips-noinsn32.d: Likewise.
* testsuite/gas/mips/micromips@beq.d: Update patterns for
branch/jump compaction.
* testsuite/gas/mips/micromips@bge.d: Likewise.
* testsuite/gas/mips/micromips@bgeu.d: Likewise.
* testsuite/gas/mips/micromips@blt.d: Likewise.
* testsuite/gas/mips/micromips@bltu.d: Likewise.
* testsuite/gas/mips/micromips@branch-misc-4.d: Likewise.
* testsuite/gas/mips/micromips@branch-misc-4-64.d: Likewise.
* testsuite/gas/mips/micromips@branch-misc-5.d: Likewise.
* testsuite/gas/mips/micromips@branch-misc-5pic.d: Likewise.
* testsuite/gas/mips/micromips@branch-misc-5-64.d: Likewise.
* testsuite/gas/mips/micromips@branch-misc-5pic-64.d: Likewise.
* testsuite/gas/mips/micromips@jal-svr4pic-local.d: Likewise.
* testsuite/gas/mips/micromips@jal-svr4pic-local-n32.d:
Likewise.
* testsuite/gas/mips/micromips@jal-svr4pic-local-n64.d:
Likewise.
* testsuite/gas/mips/micromips@loc-swap.d: Likewise.
* testsuite/gas/mips/micromips@loc-swap-dis.d: Likewise.
* testsuite/gas/mips/micromips@relax.d: Likewise.
* testsuite/gas/mips/micromips@relax-at.d: Likewise.
* testsuite/gas/mips/micromips@relax-swap3.d: Likewise.
* testsuite/gas/mips/branch-extern-2.d: Likewise.
* testsuite/gas/mips/branch-extern-4.d: Likewise.
* testsuite/gas/mips/branch-section-2.d: Likewise.
* testsuite/gas/mips/branch-section-4.d: Likewise.
* testsuite/gas/mips/branch-weak-2.d: Likewise.
* testsuite/gas/mips/branch-weak-5.d: Likewise.
* testsuite/gas/mips/micromips-branch-absolute.d: Likewise.
* testsuite/gas/mips/micromips-branch-absolute-n32.d: Likewise.
* testsuite/gas/mips/micromips-branch-absolute-n64.d: Likewise.
* testsuite/gas/mips/micromips-branch-absolute-addend.d:
Likewise.
* testsuite/gas/mips/micromips-branch-absolute-addend-n32.d:
Likewise.
* testsuite/gas/mips/micromips-branch-absolute-addend-n64.d:
Likewise.
* testsuite/gas/mips/micromips-compact.d: New test.
* testsuite/gas/mips/mips.exp: Run the new test.
ld/
* testsuite/ld-mips-elf/micromips-branch-absolute.d: Update
patterns for branch compaction.
* testsuite/ld-mips-elf/micromips-branch-absolute-addend.d:
Likewise.
opcodes/
* micromips-opc.c (micromips_opcodes): Reorder "bc" next to "b",
"beqzc" next to "beq", "bnezc" next to "bne" and "jrc" next to
"j".
Complement:
commit 1bbce13264
Author: Maciej W. Rozycki <macro@linux-mips.org>
Date: Mon Jun 24 23:55:46 2013 +0000
<https://sourceware.org/ml/binutils/2013-06/msg00077.html>, ("MIPS:
Compressed PLT/stubs support"), and also choose between regular and
compressed PLT entries as appropriate for any branches referring.
bfd/
* elfxx-mips.c (mips_elf_calculate_relocation): Handle branches
in PLT compression selection.
(_bfd_mips_elf_check_relocs): Likewise.
ld/
* testsuite/ld-mips-elf/compressed-plt-1.s: Add branch support.
* testsuite/ld-mips-elf/compressed-plt-1a.s: Likewise.
* testsuite/ld-mips-elf/compressed-plt-1b.s: Likewise.
* testsuite/ld-mips-elf/compressed-plt-1-o32-branch.od: New
test.
* testsuite/ld-mips-elf/compressed-plt-1-o32-branch.rd: New
test.
* testsuite/ld-mips-elf/compressed-plt-1-o32-mips16-bronly.od:
New test.
* testsuite/ld-mips-elf/compressed-plt-1-o32-mips16-bronly.rd:
New test.
* testsuite/ld-mips-elf/compressed-plt-1-o32-mips16-branch.od:
New test.
* testsuite/ld-mips-elf/compressed-plt-1-o32-mips16-branch.rd:
New test.
* testsuite/ld-mips-elf/compressed-plt-1-o32-umips-bronly.od:
New test.
* testsuite/ld-mips-elf/compressed-plt-1-o32-umips-bronly.rd:
New test.
* testsuite/ld-mips-elf/compressed-plt-1-o32-umips-branch.od:
New test.
* testsuite/ld-mips-elf/compressed-plt-1-o32-umips-branch.rd:
New test.
* testsuite/ld-mips-elf/mips-elf.exp: Run the new tests.
ld * ldbuildid.c: Changes for MinGW32:
Include windows.h and rpcdce.h.
(validate_build_id_style): Allow "uuid" style.
(generate_build_id): Fill in id_bits using UuidCreate().
* testsuite/ld-elf/sec64k.exp: Run test for arc, msp430, or1k
and m32r. Correct comment. Relax ld -r match to account for
msp increased number of default sections.
bfd * arc-got.h (relocate_fix_got_relocs_for_got_info): Handle the case
where there's no elf_link_hash_entry while processing GOT_NORMAL got
entries.
ld * testsuite/ld-arc/got-01.d: New file.
* testsuite/ld-arc/got-01.s: New file.
If the last parameter of a tcl function is "args" then it can take
zero or more arguments. Make use of this language feature in
run_ld_link_exec_tests.
* testsuite/lib/ld-lib.exp (run_ld_link_exec_tests): Replace
"targets_to_xfail" parameter with "args".
* testsuite/ld-elf/compress.exp: Remove empty list of xfails on
all calls to run_ld_link_exec_tests.
* testsuite/ld-elf/dwarf.exp: Likewise.
* testsuite/ld-elf/indirect.exp: Likewise.
* testsuite/ld-elf/wrap.exp: Likewise.
* testsuite/ld-i386/i386.exp: Likewise.
* testsuite/ld-i386/no-plt.exp: Likewise.
* testsuite/ld-i386/tls.exp: Likewise.
* testsuite/ld-ifunc/ifunc.exp: Likewise.
* testsuite/ld-pie/pie.exp: Likewise.
* testsuite/ld-plugin/lto.exp: Likewise.
* testsuite/ld-size/size.exp: Likewise.
* testsuite/ld-x86-64/mpx.exp: Likewise.
* testsuite/ld-x86-64/no-plt.exp: Likewise.
* testsuite/ld-x86-64/tls.exp: Likewise.
* testsuite/ld-x86-64/x86-64.exp: Likewise.
* testsuite/ld-elf/elf.exp: Likewise. Reorder args when providing
xfails and simplify lists.
* testsuite/ld-elf/shared.exp: Likewise.
bfd/
* elf.c (_bfd_elf_filter_global_symbols): Skip local symbols.
(swap_out_syms): Return an error when not finding ELF output
section rather than asserting.
* elflink.c (elf_output_implib): Call bfd_set_error on no symbols.
ld/
* testsuite/lib/ld-lib.exp (run_ld_link_tests): Add optional
parameter to pass list of xfails.
* testsuite/ld-elf/elf.exp: Add xfails for implib tests. Tidy
implib test formatting. Don't set .data start address.
* testsuite/ld-elf/implib.s: Remove first .bss directive and
replace second one with equivalent .section directive.
* testsuite/ld-elf/empty-implib.out: Add expected final error.
* testsuite/ld-elf/implib.rd: Update.
Issue an error if p_paddr becomes invalid when allocating space for
program headers.
PR ld/20376
* elf.c (assign_file_positions_for_load_sections): Also check
p_paddr for program header space.
Folding a constant expression early can lead to loss of tokens, eg.
ABSOLUTE, that are significant in ld's horrible context sensitive
expression evaluation. Also, MAXPAGESIZE and other "constants" may
not have taken values specified on the command line, leading to the
wrong value being cached.
* ldexp.c (exp_unop, exp_binop, exp_trinop, exp_nameop): Don't
fold expression.
* testsuite/ld-elf/maxpage3b.d: Expect correct maxpagesize.
Convert cross-mode regular MIPS and microMIPS BAL instructions to JALX,
similarly to how JAL instructions are converted.
bfd/
* elfxx-mips.c (mips_elf_perform_relocation): Convert cross-mode
BAL to JALX.
(_bfd_mips_elf_relocate_section) <bfd_reloc_outofrange>: Add a
corresponding error message.
gas/
* config/tc-mips.c (mips_force_relocation, mips_fix_adjustable):
Adjust comments for BAL to JALX linker conversion.
(fix_bad_cross_mode_branch_p): Accept cross-mode BAL.
* testsuite/gas/mips/unaligned-branch-1.l: Update error messages
expected.
* testsuite/gas/mips/unaligned-branch-micromips-1.l: Likewise.
* testsuite/gas/mips/branch-local-4.d: New test.
* testsuite/gas/mips/branch-local-n32-4.d: New test.
* testsuite/gas/mips/branch-local-n64-4.d: New test.
* testsuite/gas/mips/branch-addend.d: New test.
* testsuite/gas/mips/branch-addend-n32.d: New test.
* testsuite/gas/mips/branch-addend-n64.d: New test.
* testsuite/gas/mips/branch-local-4.s: New test source.
* testsuite/gas/mips/branch-addend.s: New test source.
* testsuite/gas/mips/mips.exp: Run the new tests.
ld/
* testsuite/ld-mips-elf/unaligned-branch-2.d: Update error
messages expected.
* testsuite/ld-mips-elf/unaligned-branch-r6-1.d: Likewise.
* testsuite/ld-mips-elf/unaligned-branch-mips16.d: Likewise.
* testsuite/ld-mips-elf/unaligned-branch-micromips.d: Likewise.
* testsuite/ld-mips-elf/bal-jalx-addend.d: New test.
* testsuite/ld-mips-elf/bal-jalx-local.d: New test.
* testsuite/ld-mips-elf/bal-jalx-pic.d: New test.
* testsuite/ld-mips-elf/bal-jalx-addend-n32.d: New test.
* testsuite/ld-mips-elf/bal-jalx-local-n32.d: New test.
* testsuite/ld-mips-elf/bal-jalx-pic-n32.d: New test.
* testsuite/ld-mips-elf/bal-jalx-addend-n64.d: New test.
* testsuite/ld-mips-elf/bal-jalx-local-n64.d: New test.
* testsuite/ld-mips-elf/bal-jalx-pic-n64.d: New test.
* testsuite/ld-mips-elf/unaligned-jalx-2.d: New test.
* testsuite/ld-mips-elf/unaligned-jalx-3.d: New test.
* testsuite/ld-mips-elf/unaligned-jalx-addend-2.d: New test.
* testsuite/ld-mips-elf/unaligned-jalx-addend-3.d: New test.
* testsuite/ld-mips-elf/unaligned-jalx-2.s: New test source.
* testsuite/ld-mips-elf/unaligned-jalx-3.s: New test source.
* testsuite/ld-mips-elf/unaligned-jalx-addend-2.s: New test
source.
* testsuite/ld-mips-elf/unaligned-jalx-addend-3.s: New test
source.
* testsuite/ld-mips-elf/mips-elf.exp: Run the new tests.
Verify that the ISA mode of branch targets is the same as the referring
relocation, so that an attempt to produce a branch between instructions
encoded in different ISA modes each causes an error rather than silently
producing non-functional code. Make sure that no symbol or addend bits
are silently truncated: terminate with an error if the relocation value
calculated cannot be encoded in the relocatable field of a branch; for
REL targets also applying to any intermediate addend.
Also make jump target's alignment verification consistent with that for
branches.
This change will require an update to some obscure handcoded assembly
sources which make branches to labels placed at data objects, however
for microMIPS code only. These labels will have to be updated with the
`.insn' directive for containing code to assemble and link successfully.
Such code is broken as any such labels have always been required by the
microMIPS architecture specification[1][2] to be annotated this way for
correct interpretation, and with our old code missing `.insn' directives
caused labels to present different semantics depending on whether they
were referred with branch (ISA bit ignored) or other relocations (ISA
bit respected).
Enforcing these checks however will ensure errors in building software,
like mixed regular MIPS and microMIPS code links with branches between,
will be diagnosed at the build time rather than causing odd run-time
errors such as intermittent crashes. It will also let cross-mode BAL
instructions be converted to JALX instructions, with a separate change.
References:
[1] "MIPS Architecture for Programmers, Volume II-B: The microMIPS32
Instruction Set", MIPS Technologies, Inc., Document Number: MD00582,
Revision 5.04, January 15, 2014, Section 7.1 "Assembly-Level
Compatibility", p. 533
[2] "MIPS Architecture for Programmers, Volume II-B: The microMIPS64
Instruction Set", MIPS Technologies, Inc., Document Number: MD00594,
Revision 5.04, January 15, 2014, Section 8.1 "Assembly-Level
Compatibility", p. 623
bfd/
* elfxx-mips.c (b_reloc_p): Add R_MICROMIPS_PC16_S1,
R_MICROMIPS_PC10_S1 and R_MICROMIPS_PC7_S1.
(branch_reloc_p): New function.
(mips_elf_calculate_relocation): Handle ISA mode determination
for relocations against section symbols, against absolute
symbols and absolute relocations. Also set `*cross_mode_jump_p'
for branches.
<R_MIPS16_26, R_MIPS_26, R_MICROMIPS_26_S1>: Suppress alignment
checks for weak undefined symbols. Also check target alignment
within the same ISA mode.
<R_MIPS_PC16, R_MIPS_GNU_REL16_S2>: Handle cross-mode branches
in the alignment check.
<R_MICROMIPS_PC7_S1>: Add an alignment check.
<R_MICROMIPS_PC10_S1>: Likewise.
<R_MICROMIPS_PC16_S1>: Likewise.
(mips_elf_perform_relocation): Report a failure for unsupported
same-mode JALX instructions and cross-mode branches.
(_bfd_mips_elf_relocate_section) <bfd_reloc_outofrange>: Add
error messages for jumps to misaligned addresses.
gas/
* config/tc-mips.c (mips_force_relocation): Also retain branch
relocations against MIPS16 and microMIPS symbols.
(fix_bad_cross_mode_jump_p): New function.
(fix_bad_same_mode_jalx_p): Likewise.
(fix_bad_misaligned_jump_p): Likewise.
(fix_bad_cross_mode_branch_p): Likewise.
(fix_bad_misaligned_branch_p): Likewise.
(fix_validate_branch): Likewise.
(md_apply_fix) <BFD_RELOC_MIPS_JMP, BFD_RELOC_MIPS16_JMP>
<BFD_RELOC_MICROMIPS_JMP>: Separate from BFD_RELOC_MIPS_SHIFT5,
etc. Verify the ISA mode and alignment of the jump target.
<BFD_RELOC_MIPS_21_PCREL_S2>: Replace the inline alignment check
with a call to `fix_validate_branch'.
<BFD_RELOC_MIPS_26_PCREL_S2>: Likewise.
<BFD_RELOC_16_PCREL_S2>: Likewise.
<BFD_RELOC_MICROMIPS_7_PCREL_S1, BFD_RELOC_MICROMIPS_10_PCREL_S1>
<BFD_RELOC_MICROMIPS_16_PCREL_S1>: Retain the original addend.
Verify the ISA mode and alignment of the branch target.
(md_convert_frag): Verify the ISA mode and alignment of resolved
MIPS16 branch targets.
* testsuite/gas/mips/branch-misc-1.s: Annotate non-instruction
branch targets with `.insn'.
* testsuite/gas/mips/branch-misc-5.s: Likewise.
* testsuite/gas/mips/micromips@branch-misc-5-64.d: Update
accordingly.
* testsuite/gas/mips/micromips@branch-misc-5pic-64.d: Likewise.
* testsuite/gas/mips/micromips-branch-relax.s: Annotate
non-instruction branch target with `.insn'.
* testsuite/gas/mips/micromips.s: Replace microMIPS JALX targets
with external symbols.
* testsuite/gas/mips/micromips-insn32.d: Update accordingly.
* testsuite/gas/mips/micromips-noinsn32.d: Likewise.
* testsuite/gas/mips/micromips-trap.d: Likewise.
* testsuite/gas/mips/micromips.d: Likewise.
* testsuite/gas/mips/mips16.s: Annotate non-instruction branch
targets with `.insn'.
* testsuite/gas/mips/mips16.d: Update accordingly.
* testsuite/gas/mips/mips16-64.d: Likewise.
* testsuite/gas/mips/mips16-dwarf2.s: Annotate non-instruction
branch target with `.insn'.
* testsuite/gas/mips/relax-swap3.s: Likewise.
* testsuite/gas/mips/branch-local-2.l: New list test.
* testsuite/gas/mips/branch-local-3.l: New list test.
* testsuite/gas/mips/branch-local-n32-2.l: New list test.
* testsuite/gas/mips/branch-local-n32-3.l: New list test.
* testsuite/gas/mips/branch-local-n64-2.l: New list test.
* testsuite/gas/mips/branch-local-n64-3.l: New list test.
* testsuite/gas/mips/unaligned-jump-1.l: New list test.
* testsuite/gas/mips/unaligned-jump-2.l: New list test.
* testsuite/gas/mips/unaligned-jump-3.d: New test.
* testsuite/gas/mips/unaligned-jump-mips16-1.l: New list test.
* testsuite/gas/mips/unaligned-jump-mips16-2.l: New list test.
* testsuite/gas/mips/unaligned-jump-mips16-3.d: New test.
* testsuite/gas/mips/unaligned-jump-micromips-1.l: New list
test.
* testsuite/gas/mips/unaligned-jump-micromips-2.l: New list
test.
* testsuite/gas/mips/unaligned-jump-micromips-3.d: New test.
* testsuite/gas/mips/unaligned-branch-1.l: New list test.
* testsuite/gas/mips/unaligned-branch-2.l: New list test.
* testsuite/gas/mips/unaligned-branch-3.d: New test.
* testsuite/gas/mips/unaligned-branch-r6-1.l: New list test.
* testsuite/gas/mips/unaligned-branch-r6-2.l: New list test.
* testsuite/gas/mips/unaligned-branch-r6-3.l: New list test.
* testsuite/gas/mips/unaligned-branch-r6-4.l: New list test.
* testsuite/gas/mips/unaligned-branch-r6-5.d: New test.
* testsuite/gas/mips/unaligned-branch-r6-6.d: New test.
* testsuite/gas/mips/unaligned-branch-mips16-1.l: New list test.
* testsuite/gas/mips/unaligned-branch-mips16-2.l: New list test.
* testsuite/gas/mips/unaligned-branch-mips16-3.d: New test.
* testsuite/gas/mips/unaligned-branch-micromips-1.l: New list
test.
* testsuite/gas/mips/unaligned-branch-micromips-2.l: New list
test.
* testsuite/gas/mips/unaligned-branch-micromips-3.d: New test.
* testsuite/gas/mips/branch-local-2.s: New test source.
* testsuite/gas/mips/branch-local-3.s: New test source.
* testsuite/gas/mips/branch-local-n32-2.s: New test source.
* testsuite/gas/mips/branch-local-n32-3.s: New test source.
* testsuite/gas/mips/branch-local-n64-2.s: New test source.
* testsuite/gas/mips/branch-local-n64-3.s: New test source.
* testsuite/gas/mips/unaligned-jump-1.s: New test source.
* testsuite/gas/mips/unaligned-jump-2.s: New test source.
* testsuite/gas/mips/unaligned-jump-mips16-1.s: New test source.
* testsuite/gas/mips/unaligned-jump-mips16-2.s: New test source.
* testsuite/gas/mips/unaligned-jump-micromips-1.s: New test
source.
* testsuite/gas/mips/unaligned-jump-micromips-2.s: New test
source.
* testsuite/gas/mips/unaligned-branch-1.s: New test source.
* testsuite/gas/mips/unaligned-branch-2.s: New test source.
* testsuite/gas/mips/unaligned-branch-r6-1.s: New test source.
* testsuite/gas/mips/unaligned-branch-r6-2.s: New test source.
* testsuite/gas/mips/unaligned-branch-r6-3.s: New test source.
* testsuite/gas/mips/unaligned-branch-r6-4.s: New test source.
* testsuite/gas/mips/unaligned-branch-mips16-1.s: New test
source.
* testsuite/gas/mips/unaligned-branch-mips16-2.s: New test
source.
* testsuite/gas/mips/unaligned-branch-micromips-1.s: New test
source.
* testsuite/gas/mips/unaligned-branch-micromips-2.s: New test
source.
* testsuite/gas/mips/mips.exp: Run the new tests.
ld/
* testsuite/ld-mips-elf/unaligned-jalx-1.d: Update error message
expected.
* testsuite/ld-mips-elf/unaligned-jalx-addend-1.d: Likewise.
* testsuite/ld-mips-elf/unaligned-jalx-addend-mips16-1.d:
Likewise.
* testsuite/ld-mips-elf/unaligned-jalx-addend-micromips-1.d:
Likewise.
* testsuite/ld-mips-elf/unaligned-jalx-mips16-1.d: Likewise.
* testsuite/ld-mips-elf/unaligned-jalx-micromips-1.d: Likewise.
* testsuite/ld-mips-elf/undefweak-overflow.s: Add jumps,
microMIPS BAL and MIPS16 instructions.
* testsuite/ld-mips-elf/undefweak-overflow.d: Update
accordingly.
* testsuite/ld-mips-elf/unaligned-branch-2.d: New test.
* testsuite/ld-mips-elf/unaligned-branch-r6-1.d: New test.
* testsuite/ld-mips-elf/unaligned-branch-r6-2.d: New test.
* testsuite/ld-mips-elf/unaligned-branch-mips16.d: New test.
* testsuite/ld-mips-elf/unaligned-branch-micromips.d: New test.
* testsuite/ld-mips-elf/unaligned-jump-mips16.d: New test.
* testsuite/ld-mips-elf/unaligned-jump-micromips.d: New test.
* testsuite/ld-mips-elf/unaligned-jump.d: New test.
* testsuite/ld-mips-elf/mips-elf.exp: Run the new tests.
When using the plugin interface to claim an input file the claim method
from (possible) many plugins can be called on an input file. If these
claim methods read content from the input file then the file offset
stored in the underlying file descriptor will change.
As we share a file descriptor between the plugin interface (created with
dup in ld/plugin.c:plugin_object_p) and the input bfd object, then any
changes to the file offset in the file descriptor will effect the bfd
object. Also, as the changes to the file offset did not originate from
calls through the bfd interface, but instead came from the plugin
directly, then the bfd will not be aware that the file offset has
changed. This is a problem as the bfd library caches the file offset.
If the plugin decides not to claim an input file then, currently, we
leave the bfd in a state where the actual file offset is out of sync
with the cached file offset.
This problem came to light after a recent commit
7d0b9ebc1e (Don't include libbfd.h outside
of bfd, part 6) however, I don't believe that commit actual introduces
the bug, it just exposed the existing issue.
This commit solves the problem by backing up and restoring the file
offset for the file descriptor of the input file. The restore is only
done if the plugin does not claim the input file, as it is in this case
that the bfd library might be used again to try and identify the
unclaimed file.
ld/ChangeLog:
* plugin.c (plugin_call_claim_file): Restore the file offset after
an unsuccessful attempt to claim a file.
* testplug.c (bytes_to_read_before_claim): New global.
(record_read_length): New function, sets new global
bytes_to_read_before_claim.
(parse_option): Handle 'read:<NUMBER>' option.
(onclaim_file): Read file content before checking for claim.
* testsuite/ld-plugin/plugin-30.d: New file.
* testsuite/ld-plugin/plugin.exp: Add new test.
Some messing with plugin code in order to not need arelt_size in
ld code. File descriptor handling in ld/plugin.c is tidied too,
simply duping the open fd rather than opening the file again.
bfd/
* elflink.c: Include plugin-api.h.
* plugin.c (bfd_plugin_open_input): New function, extracted from..
(try_claim): ..here.
* plugin.h: Don't include bfd.h.
(bfd_plugin_open_input): Declare.
binutils/
* ar.c: Include plugin-api.h.
* nm.c: Likewise.
ld/
* plugin.c: Don't include libbfd.h. Include plugin-api.h
before bfd/plugin.h.
(plugin_object_p): Use bfd_plugin_open_input.
Not much to see here, just renaming a function.
bfd/
* targets.c (bfd_seach_for_target): Rename to..
(bfd_iterate_over_targets): ..this. Rewrite doc.
* bfd-in2.h: Regenerate.
ld/
* ldlang.c (open_output): Replace bfd_search_for_target with
bfd_iterate_over_targets. Localize vars.
