This applies the second part of GDB's End of Year Procedure, which
updates the copyright year range in all of GDB's files.
gdb/ChangeLog:
Update copyright year range in all GDB files.
Rather than stuffing the command line with a bunch of -D flags, start
moving things to config.h which is managed by autoheader. This makes
the makefile a bit simpler and the build output tighter, and it makes
the migration to automake easier as there are fewer vars to juggle.
We'll want to move the other options out too, but it'll take more work.
This was imported from the ppc sim, but that was only used to control
a single file, and that is already governed by the hw models. There's
no need to have a sep configure option here, especially since none of
the other sims are using it. Even when the code is enabled, there's
no runtime overhead.
Currently ports have to call SIM_AC_OPTION_ENVIRONMENT explicitly in
order to make the configure flag available. There's no real reason
to not allow this flag for all ports, so move it to the common sim
macro. This way we get standard behavior across all ports too.
Currently ports have to call SIM_AC_OPTION_ASSERT explicitly in order
to make the configure flag available, which none of them do. There's
no real reason to not allow this flag for all ports, so move it to the
common sim macro. This way we get standard behavior across all ports.
We don't have alternative nltvals.def files, so always symlinking
the targ-vals.def file to it doesn't gain us anything. It does
make the build more complicated though and a pain to convert to
something newer (like automake). Drop the symlinking entirely.
In the future, we'll want to explode this file anyways into the
respective arch dirs so things can be selected dynamically at
runtime, so it's not like we'll be bringing this back.
Currently ports have to call SIM_AC_OPTION_INLINE explicitly in order
to make the configure flag available. There's no real reason to not
allow this flag for all ports, so move it to the common sim macro.
This way we get standard behavior across all ports too.
These options were never exposed for most sims (just the ppc one),
and they are really only useful on 32-bit x86 systems. Considering
modern systems tend to be 64-bit x86_64 and how well modern compilers
are at optimizing code, these have outlived their usefulness.
No other sub directory provides such a configuration option, so
drop it from the sim dir as well. This cleans up a good bit of
code in the process.
If people want to use custom flags for just the sim, they can
still run configure+make by hand in the sim subdir and use the
normal CFLAGS settings.
The common subdir sets up a cconfig.h file to hold checks for the common
code. In practice, most files still end up using config.h instead which
just leads to confusion.
Merge all the configure checks that went into cconfig.h into SIM_AC_COMMON
so we can drop the cconfig.h file altogether. Now there is only a single
config.h file like normal.
The compiler/C library should produce reasonable code for htonl/ntohl,
and at least glibc tries pretty hard to always produce good code for
them. This logic only had support for 32-bit x86 systems anymore, and
it's unlikely people were even opting into this, so drop it all.
Fix a long standing todo where we let getopt write directly to stderr
when an invalid option is passed. Use the sim io funcs instead as they
go through the filtered callbacks that gdb wants.
Clean up some more remains of WITH_DEVICES that escaped notice.
We also clean up GETTWI/SETTWI defines in a few ports where they
were copied & pasted and are unused as they happen to be near the
device code.
The --enable-sim-hostendian flag was purely so people had an escape route
for when cross-compiling. This is because historically, AC_C_BIGENDIAN
did not work in those cases. That was fixed a while ago though, so we can
require that macro everywhere now and simplify a good bit of code.
Rather than re-invent endian defines, as well as maintain our own list
of OS & arch-specific includes, punt all that logic in favor of the bfd
ones already set up and maintained elsewhere. We already rely on the
bfd library, so leveraging the endian aspect should be fine.
The global current_state handle to the current simulator state is a
design idea that was half implemented, but never really cleaned up.
The point was to have a global variable pointing to the state so that
funcs could more quickly & easily access the state anywhere. We've
instead moved in the direction of passing state around everywhere and
don't have any intention of moving back.
I also can't find any references to gdb using this variable, or to
cgen related "dump_regs" functions, both of which were used in the
comments related to this code.
Pretty much all targets are using this module already, so add it to the
common list of objects. The only oddball out here is cris and that's
because it supports loading via an offset for all the phdrs. We drop
support for that.
No arch is using this anymore, and we want all new ports using the
hardware framework instead. Punt WITH_DEVICES and the two callbacks
device_io_{read,write}_buffer.
We can also punt the tconfig.h file as no port is using it anymore.
This fixes in-tree builds that get confused by picking up the wrong
one (common/ vs <port>/) caused by commit ae7d0cac8c.
Any port that needs to set up a global define can use their own
sim-main.h file that they must provide regardless.
The point of passing down the cpu to core reads/writes is to signal which
cpu is making the access. For system accesses (such as internal memory
initialization), passing the cpu down doesn't make sense, and in the case
of early init like cris, can cause crashes. Since the cpu isn't fully set
up at this point, if the core code tries to access some fields (like the
PC reg), it'll crash. While cris shouldn't be doing this setup here (it
should be in the inferior stage), we'll deal with that later.
For targets that process argv in sim_create_inferior, improve the code:
- provide more details in the comment
- make the check for when to re-init more robust
- clean out legacy sim_copy_argv code
This will be cleaned up more in the future when we have a common inferior
creation function, but at least help new ports get it right until then.
The cris port was using the device framework to handle two addresses when
the --cris-900000xx flag was specified. That can be implemented using the
newer hardware framework instead which allows us to drop the device logic
entirely, as well as delete the tconfig.h file. Basically we create a new
cris_900000xx device model and move the read logic out of devices.c and
into that. The rest of the devices logic was callback to the hardware
framework already.
Rather than include this for some targets, set it up so we can build it
all the time via the common code. This makes it easier for targets to
opt into it when they're ready, increases build coverage, and allows us
to centralize much of the logic.
We also get to delete tconfig.h from two more targets -- they were
setting WITH_DEVICES to 0 which has the same behavior as not defining
it at all.
While the SIM_HAVE_MODEL knob is gone, we now have WITH_MODEL_P, but it
is only used by the common sim-model code. We use it to declare dummy
model lists when the arch hasn't created its own.
The "MACH" and "MODEL" names are a bit generic and collide with symbols
used by other sections of code (like h8300's opcodes). Since these are
sim-specific types, they really should have a "SIM_" prefix.
Only four targets implement this function, and three of them do nothing.
The 4th merely calls abort. Since calls to this function are followed
by calls to sim_hw_abort or sim_io_error, this is largely useless. In
the two places where we don't, replace the call with sim_engine_abort.
We want to kill off the WITH_DEVICES logic in favor of WITH_HW, so this
is a good first step.
Most targets already default to loading code via their LMA, but for
a few, this means the default changes from loading VMA to LMA. It's
better to have the different targets be consistent, and allows some
code clean up.
We've moved custom option install for other targets to sim_open, so update
cris too. It's the last one using MODULE_LIST, so we can drop that from
the common code too.
Now that all arches (for the most part) have moved over, move sim-stop.o,
sim-reason.o, and sim-reg.o to the common object list and out of all the
arch ports.
Other than the nice advantage of all sims having to declare one fewer
common function, this also fixes leakage in pretty much every sim.
Many were not freeing any resources, and a few were inconsistent as
to the ones they did. Now we have a single module that takes care of
all the logic for us.
Most of the non-cgen based ones could be deleted outright. The cgen
ones required adding a callback to the arch-specific cleanup func.
The few that still have close callbacks are to manage their internal
state.
We do not convert erc32, m32c, ppc, rl78, or rx as they do not use
the common sim core.
When tracing, we often want to display the human readable name for the
various syscall/errno values. Rather than make each target duplicate
the lookup, extend the existing maps to include the string directly,
and add helper functions to look up the constants.
While most targets are autogenerated (from libgloss), the bfin/cris
targets have custom maps for the Linux ABI which need to be updated
by hand.
The cgen code declares some macros/funcs using the trace_xxx prefix, but
the code isn't generic and only works with cgen targets. This is blocking
the creation of new common trace functions.
Let's blindly add cgen_xxx prefixes to all these symbols. Some already
use this convention to avoid conflicts, so it makes sense to align them.
In the future we might want to move some to the common trace core, but
one thing at a time.
Now that we've unified sim-cpu, we can delete the duplicate sim-engine
hooks -- these targets defined these only because they didn't fully
implement the sim-cpu callbacks.
Since every target typedefs this the same way, move it to the common code.
We have to leave Blackfin behind here for now because of inter-dependencies
on types and headers: sim-base.h includes sim-model.h which needs types in
machs.h which needs types in bfim-sim.h which needs SIM_CPU.
Almost every target defines sim_cia the same way -- either using the
address_word type directly, or a type of equivalent size. The only
odd one out is sh64 (who has 32bit address_word and 64bit cia), and
even that case doesn't seem to make sense. We'll put off clean up
though of sh64 and at least set up a sensible default for everyone.
The CIA_{GET,SET} macros serve the same function as CPU_PC_{GET,SET}
except the latter adds a layer of indirection via the sim state. This
lets models set up different functions at runtime and doesn't reach so
directly into the arch-specific cpu state.
It also doesn't make sense to have two sets of macros that do exactly
the same thing, so lets standardize on the one that gets us more.
Now that all the targets are utilizing CPU_PC_{FETCH,STORE}, and the
cpu state is multicore, and the STATE_CPU defines match, we can move
it all to the common code.
This sets up the sim_state structure and the cpu member to match what we
do in most other sims, and what the common code suggests. This is a step
to unifying on the sim-cpu.o object.
Mike Frysinger
Joel Brobecker