These two functions are only used from procfs_make_note_section, which
itself is only defined if:
#if defined (UNIXWARE) || defined (PIOCOPENLWP) || defined (PCAGENT)
So these two functions are unused on mips-irix, and they get flagged
by -Wunused-function. This patch simply moves these functions closer
to the function that uses them, which also has the effect of putting
them inside the same #if block as procfs_make_note_section. Thus
they are defined only when used.
gdb/ChangeLog:
* procfs.c (find_signalled_thread, find_stop_signal): Move
these functions down to define them only when used.
The problem is printing the wrong value for dynamic local variables
when using the "info locals" command. Consider the following code:
procedure Print (I1 : Positive; I2 : Positive) is
type My_String is array (I1 .. I2) of Character;
I : My_String := (others => 'A');
S : String (1 .. I2 + 3) := (others => ' ');
begin
S (I1 .. I2) := String (I); -- BREAK
Put_Line (S);
end Print;
After the debugger stopped at BREAK, we try printing all local variables.
Here is what we get:
(gdb) info locals
i = "["00"]["00"]"
s = "["00"]["00"]["00"]["00"]["00"]["00"]["00"]["00"]"
Curiously, printing their value using the "print" command works:
(gdb) print i
$1 = "AA"
(gdb) print s
$2 = " "
We traced the problem to trying to get the contents of a variable
(call to value_contents) before "fix'ing" it. For those not familiar
with the Ada language support, "fixing" a value consists of swapping
the value's dynamic type with a static version that is appropriate
for our actual value. As a result, the dynamic type was used to
determine the value size, which is zero, and thus the value contents
was empty.
gdb/ChangeLog:
* valprint.c (common_val_print): Fix the value before extracting
its contents.
* ada-lang.c (ada_to_fixed_value): Make this function extern.
* ada-lang.h (ada_to_fixed_value): New function declaration.
* ada-valprint.c (ada_value_print): Use ada_to_fixed_value
to avoid code duplication and fix a bug in the handling of
fixed types contents.
gdb/testsuite/ChangeLog:
* gdb.ada/dyn_loc: New testcase.
* icf.cc (get_section_contents): Check for preemptible functions.
Ignore addend when appropriate.
* symtab.cc (should_add_dynsym_entry): Add new parameter. Check for
section folded.
(add_from_relobj): Check for section folded.
(set_dynsym_indexes): Fix call to should_add_dynsym_entry.
* symtab.h (should_add_dynsym_entry): Add new parameter.
* target-reloc.h (scan_relocs): Check for section folded.
* x86_64.cc (Target_x86_64::Scan::possible_function_pointer_reloc):
Check reloc types for function pointers in shared objects.
* testsuite/Makefile.am (icf_virtual_function_folding_test): New test
case.
(icf_preemptible_functions_test): New test case.
(icf_string_merge_test): New test case.
* testsuite.Makefile.in: Regenerate.
* testsuite/icf_safe_so_test.sh: Change to not fold foo_glob and
bar_glob. Refactor code.
* testsuite/icf_preemptible_functions_test.cc: New file.
* testsuite/icf_preemptible_functions_test.sh: New file.
* testsuite/icf_string_merge_test.cc: New file.
* testsuite/icf_string_merge_test.sh: New file.
* testsuite/icf_virtual_function_folding_test.cc: New file.
* testsuite/icf_virtual_function_folding_test.sh: New file.
2010-04-20 Jan Kratochvil <jan.kratochvil@redhat.com>
* f-exp.y: Add new production to recognize the `logical*8' type.
(LOGICAL_S8_KEYWORD): New token.
* f-lang.c (enum f_primitive_types)
<f_primitive_type_logical_s8>: New field.
(f_language_arch_info): Handling `logical*8' type.
(build_fortran_types): Building `logical*8' type.
* f-lang.h (struct builtin_f_type) <builtin_logical_s8>: New field.
gdb/testsuite/ChangeLog:
2010-04-20 Jan Kratochvil <jan.kratochvil@redhat.com>
Sergio Durigan Junior <sergiodj@redhat.com>
* gdb.fortran/logical.exp: New testcase.
* gdb.fortran/logical.f90: New file.
* macro.c (macro_expand_body): Do not treat LOCAL as a keyword in
altmacro mode if found inside a quoted string.
* gas/macros/altmacro.s: New test.
* gas/macros/altmacro.d: Expected output.
(CONTEXT_EXTENDED_REGISTERS): Set macro to zero if not exisiting.
(init_registers_amd64): Declare.
(mappings): Add 64-bit version of array.
(init_windows_x86): New function.
(the_low_target): Change init_arch field to init_windows_x86.
(child_xfer_memory): Use uintptr_t type for local variable `addr'.
(get_image_name): Use SIZE_T type for local variable `done'.
(psapi_get_dll_name): Use LPVOID type for parameter `BaseAddress'.
(toolhelp_get_dll_name): Idem.
(handle_load_dll): Use CORE_ADDR type for local variable `load_addr'.
Use uintptr_t typecast to avoid warning.
(handle_unload_dll): Use uintptr_t typecast to avoid warning.
(handle_exception): Use phex_nz to avoid warning.
(win32_wait): Remove unused local variable `process'.
Vladimir Prus <vladimir@codesourcery.com>
* tracepoint.c (tfind_1): Add missing newline, report exit from
tfind mode as such.
* target.c (update_current_target): Make default
to_trace_find return -1.
The current ObjC logic will check both the symbol name and the target
address space when trying to locate an appropriate selector. The problem
is that first the target address space is checked before the symbol name.
This may lead to a lot of unnecessary host<->target transactions when
dealing with a non-OjbC target that does use function descriptors to
describe functions as every symbol will have its FD read just to have the
result thrown away with non-matching symbol names.
It also may lead to problems when a non-FD symbol is found that points near
the end of the address space as the target will throw up a memory_error().
One such example are symbols that are not functions, smaller than a FD,
and are the last valid location. Obviously treating it as a larger data
struct can cause memory overflows.
So to speed things up and not screw over such targets, check the symbol
name (which we already have locally) first before attempting to read the
function's descriptor. This fixes breakpoints with Blackfin Linux FDPIC
ELFs, and seems to cause no native regressions on my x86_64/Linux system.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
There is an architecture-info flag for listing possible arch values, but
there is on equivalent for listing possible model values. So add the
equivalent for models.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
* gdb.base/solib-display.exp: Replace gdb_exit, gdb_start,
gdb_reinitialize_dir and gdb_load by clean_restart. Remove trailing
gdb_exit and return.
(executable): New variable.
(binfile): Use it.
Implement `save-breakpoints'.
gdb/
* breakpoint.c (save_cmdlist): New.
(breakpoint_set_cmdlist, breakpoint_show_cmdlist): Moved up close
to save_cmdlist.
(print_recreate_catch_fork): New.
(catch_fork_breakpoint_ops): Install it.
(print_recreate_catch_vfork): New.
(catch_vfork_breakpoint_ops): Install it.
(print_recreate_catch_syscall): New.
(catch_syscall_breakpoint_ops): Install it.
(print_recreate_catch_exec): New.
(catch_exec_breakpoint_ops): Install it.
(print_recreate_exception_catchpoint): New.
(gnu_v3_exception_catchpoint_ops): Install it.
(save_breakpoints): New, based on tracepoint_save_command, but
handle all breakpoint types.
(save_breakpoints_command): New.
(tracepoint_save_command): Rename to...
(save_tracepoints_command): ... this, and reimplement using
save_breakpoints.
(save_command): New.
(_initialize_breakpoints): Install the "save" command prefix.
Install the "save breakpoints" command. Make "save-tracepoints" a
deprecated alias for "save tracepoints".
* breakpoint.h (struct breakpoint_ops): New field `print_recreate'.
* ada-lang.c (print_recreate_exception): New.
(print_recreate_catch_exception): New.
(catch_exception_breakpoint_ops): Install it.
(print_recreate_catch_exception_unhandled): New.
(catch_exception_unhandled_breakpoint_ops): Install it.
(print_recreate_catch_assert): New.
(catch_assert_breakpoint_ops): Install it.
* NEWS: Mention the new `save breakpoints' command. Mention the
new `save tracepoints' alias and that `save-tracepoints' is now
deprecated.
gdb/doc/
* gdb.texinfo (Save Breakpoints): New node.
(save-tracepoints): Rename to ...
(save tracepoints): ... this. Mention that `save-tracepoints' is
a deprecated alias to `save tracepoints'.
gdb/testsuite/
* gdb.trace/save-trace.exp: Adjust.
* tui/tui-out.c: Include cli-out.h.
(tui_table_begin, tui_table_body, tui_table_end, tui_table_header)
(tui_begin, tui_end, tui_field_int, tui_field_skip)
(tui_field_string, tui_field_fmt, tui_spaces, tui_text)
(tui_message, tui_wrap_hint, tui_flush): Delete forward
declarations.
(struct ui_out_data): Rename to...
(struct tui_ui_out_data): ... this. Remove `stream' and
`suppress_output' fields, and inherit cli_ui_out_data.
(tui_out_data): New typedef.
(tui_ui_out_impl): Don't initialize fields staticaly.
(tui_table_begin, tui_table_body, tui_table_end, tui_table_header)
(tui_begin, tui_end): Delete.
(tui_field_int): Adjust to delegate most work to the base type.
(tui_field_skip): Delete.
(tui_field_string, tui_field_fmt): Adjust comment. Adjust to
delegate most work to the base type.
(tui_spaces): Delete.
(tui_text): Adjust to delegate most work to the base type.
(tui_message): Delete.
(tui_wrap_hint): Delete.
(tui_flush): Delete.
(out_field_fmt): Delete.
(field_separator): Delete.
(tui_out_new): Adjust to initialize the base type.
(_initialize_tui_out): Initialize tui_ui_out_impl.
* cli-out.c (struct ui_out_data): Moved out to cli-out.h, renamed
cli_ui_out_data.
(cli_out_data): Adjust.
(cli_ui_out_impl): Make extern.
(cli_table_header, cli_field_int, cli_field_skip): Use
uo_field_string instead of cli_field_string.
(cli_redirect): Adjust to use cli_out_data.
(cli_out_data_ctor): New.
(cli_out_new): Use it.
* cli-out.h (struct ui_file): Remove forward declaration.
(struct cli_ui_out_data): New, moved from cli-out.c, and renamed.
(cli_ui_out_impl): Declare.
(cli_out_data_ctor): Declare.
* ui-out.c (struct ui_out) <data>: Change type to void pointer.
(uo_field_string): No longer static.
(ui_out_data): Change return type to void pointer.
(ui_out_new): Change `data' parameter type to void pointer.
* ui-out.h (struct ui_out_data): Don't forward declare.
(ui_out_data): Change return type to void pointer.
(ui_out_new): Change `data' parameter type to void pointer.
(uo_field_string): Declare.
is_hardware_watchpoint.
(watchpoints_triggered): Ditto.
(bpstat_check_location): Use is_watchpoint and
is_hardware_watchpoint.
(bpstat_check_watchpoint): Use is_watchpoint and
is_hardware_watchpoint.
(bpstat_stop_status): Fix comment.
(user_settable_breakpoint): Use is_watchpoint.
(hw_watchpoint_used_count): Use is_hardware_watchpoint.
(disable_watchpoints_before_interactive_call_start): Use
is_watchpoint.
(enable_watchpoints_after_interactive_call_stop): Use
is_watchpoint.
(clear_command): Use is_watchpoint.
(do_enable_breakpoint): Use is_watchpoint.
The recent change to reload_shared_libraries() broke FDPIC shared libraries as
the solib-frv.c code was implicitly relying on the initial order of calls
(first solib_addr() and then solib_create_inferior_hook()). It was
maintaining internal state via enable_break{1,2}_done to handle this.
While I could tweak these values a bit more, the original code wasn't terribly
bullet proof -- if during the initial debug you attempted to view shared
libraries, the enable2_break() code would whine about the ldso internal debug
addresses being unfetchable (and would actually attempt to read address 0x8 on
the target). So I've dropped this implicit dependency on order (i.e.
enable_break1_done) and updated the ldso poking code (i.e. enable_break2) to
silently return when the internal debug address is still set to 0. It will
remain this way until the ldso gets a chance to initialize at which point the
code will act the same as before.
While I have no way of testing the FRV, the Blackfin FDPIC code is using this
same base in a 100% copy & paste method since we implemented FDPIC the same
way as the FRV guys (I'll address this in the future). This fix was required
in order to handle shared libraries with Blackfin FDPIC properly, and I see no
reason why it wouldn't also work for FRV (since the uClibc ldso FDPIC code is
the same too and that's really what this is poking).
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
instead of an error if no PLT entry is found. Return a
potentially useful result.
(m32c_m16c_pointer_to_address): Add code to search for function
address when no .plt entry is found.
Joel Brobecker