In a non-pic executable, ELFv2 like other targets, needs to emit a plt
entry even for non-call references to functions defined in shared
libraries, and define the function on the plt code.
* elf64-ppc.c (ppc64_elf_copy_indirect_symbol): Copy
pointer_equality_needed flag.
(ppc64_elf_check_relocs): For ELFv2 arrange to emit plt
entries for references to functions in shared libraries on
non-call relocs.
(readonly_dynrelocs): Split into function of the same name and..
(maybe_set_textrel): ..this new function. Update call.
(ppc64_elf_adjust_dynamic_symbol): Don't emit dynrelocs for
ELFv2 in most cases if we have a plt entry. Use new
readonly_relocs.
(allocate_dynrelocs): For ELFv2, don't allocate dynreloc space
for ifunc in static executables.
(size_global_entry_stubs): New function.
(ppc64_elf_size_dynamic_sections): Call size_global_entry_stubs.
Save end of glink branch table.
(ppc64_elf_hash_symbol): New function.
(build_global_entry_stubs): New function.
(ppc64_elf_build_stubs): Call build_global_entry_stubs. Adjust
glink sizing.
(ppc64_elf_relocate_section): Tidy plt16/32/64 reloc code.
(ppc64_elf_finish_dynamic_symbol): For ELFv2, adjust symbols
defined on plt code.
On PowerPC64 ELFv2 readelf emits [<localentry>: 8] describing extra
symbol st_other bits.
* ld-elfvers/vers24.rd: Allow extra readelf output after
symbol visibility.
* ld-ifunc/ifunc.exp: Likewise.
I think HJ has already fixed the binutils and ld tests with his
2013-09-27 readelf change, but this allows them to pass with wider
address output as per Nick's 2013-09-12 readelf change.
binutils/testsuite/
* binutils-all/x86-64/compressed-1a.d: Allow wide display of addresses.
gas/testsuite/
* gas/cfi/cfi-x86_64.d: Match when lacking end of section padding.
ld/testsuite/
* ld-pe/cfi.d: Allow wide display of addresses.
Every function has a nominal toc pointer value, even if it isn't used,
so set toc_off for every code section to the value used in that object
file. The thinking here was that if a code section didn't use the toc
it could use the previous object file's toc pointer value. It can,
but doing so is only a gain if functions in that section are called
mostly from previous objects sharing the same toc. We lose if the
functions in question are called mostly from the current object or
following objects, and it's a good bet they will probably mostly be
called from the current object.
* elf64-ppc.c (ppc64_elf_next_input_section): Always set toc_off
to value for object file.
bfd/
* elf-nacl.c (segment_eligible_for_headers): Drop requirement that
some section have SEC_HAS_CONTENTS set. It's not set for
.note.gnu.build-id, and a segment of only read-only SHT_NOBITS
sections is implausible and not really supportable anyway.
As discussed on the GDB ML[1], libc probes for longjmp were not being
loaded if a custom <arch>_get_longjmp_target function was not
implemented.
This is trivially fixed by moving the 'if (!gdbarch_get_longjmp_target_p
(gdbarch))' down, just bellow libc probe code and above the per-objfile
cache lookup.
While the condition could also be removed altogether with no
side-effects, it is in fact an optimization to avoid searching for
symbols if the arch doesn't provide support for get_longjmp_target().
This has been tested on PPC and PPC64.
[1] https://sourceware.org/ml/gdb/2013-10/msg00191.html
gdb/
2013-11-01 Tiago Stürmer Daitx <tdaitx@linux.vnet.ibm.com>
* breakpoint.c (create_longjmp_master_breakpoint): Allow libc
probe scan even when the arch provides no get_longjmp_target.
IMO, it doesn't make sense to map random syscall, fork, etc. events to
GDB_SIGNAL_TRAP, and possible have the debuggee see that trap. This
just seems conceptually wrong to me - these aren't real signals a
debuggee would ever see. In fact, when stopped for those events, on
Linux, the debuggee isn't in a signal-stop -- there's no way to
resume-and-deliver-signal at that point, for example. E.g., when
stopped at a fork event:
(gdb) catch fork
Catchpoint 2 (fork)
(gdb) c
Continuing.
Catchpoint 2 (forked process 4570), 0x000000323d4ba7c4 in __libc_fork () at ../nptl/sysdeps/unix/sysv/linux/fork.c:131
131 pid = ARCH_FORK ();
(gdb) set debug infrun 1
(gdb) signal SIGTRAP
Continuing with signal SIGTRAP.
infrun: clear_proceed_status_thread (process 4566)
infrun: proceed (addr=0xffffffffffffffff, signal=5, step=0)
infrun: resume (step=0, signal=5), trap_expected=0, current thread [process 4566] at 0x323d4ba7c4
infrun: wait_for_inferior ()
infrun: target_wait (-1, status) =
infrun: 4566 [process 4566],
infrun: status->kind = exited, status = 0
infrun: infwait_normal_state
infrun: TARGET_WAITKIND_EXITED
[Inferior 1 (process 4566) exited normally]
infrun: stop_stepping
(gdb)
Note the signal went nowhere. It was swallowed.
Resuming with a SIGTRAP from a syscall event does queue the signal,
but doesn't deliver it immediately, like "signal SIGTRAP" from a real
signal would. It's still an artificial SIGTRAP:
(gdb) catch syscall
Catchpoint 2 (any syscall)
(gdb) c
Continuing.
Catchpoint 2 (call to syscall clone), 0x000000323d4ba7c4 in __libc_fork () at ../nptl/sysdeps/unix/sysv/linux/fork.c:131
131 pid = ARCH_FORK ();
(gdb) set debug infrun 1
(gdb) signal SIGTRAP
Continuing with signal SIGTRAP.
infrun: clear_proceed_status_thread (process 4622)
infrun: proceed (addr=0xffffffffffffffff, signal=5, step=0)
infrun: resume (step=0, signal=5), trap_expected=0, current thread [process 4622] at 0x323d4ba7c4
infrun: wait_for_inferior ()
infrun: target_wait (-1, status) =
infrun: 4622 [process 4622],
infrun: status->kind = exited syscall
infrun: infwait_normal_state
infrun: TARGET_WAITKIND_SYSCALL_RETURN
infrun: syscall number = '56'
infrun: BPSTAT_WHAT_STOP_NOISY
infrun: stop_stepping
Catchpoint 2 (returned from syscall clone), 0x000000323d4ba7c4 in __libc_fork () at ../nptl/sysdeps/unix/sysv/linux/fork.c:131
131 pid = ARCH_FORK ();
(gdb) c
Continuing.
infrun: clear_proceed_status_thread (process 4622)
infrun: proceed (addr=0xffffffffffffffff, signal=144, step=0)
infrun: resume (step=0, signal=0), trap_expected=0, current thread [process 4622] at 0x323d4ba7c4
infrun: wait_for_inferior ()
infrun: target_wait (-1, status) =
infrun: 4622 [process 4622],
infrun: status->kind = stopped, signal = SIGTRAP
infrun: infwait_normal_state
infrun: TARGET_WAITKIND_STOPPED
infrun: stop_pc = 0x323d4ba7c4
infrun: random signal 5
Program received signal SIGTRAP, Trace/breakpoint trap.
infrun: stop_stepping
0x000000323d4ba7c4 in __libc_fork () at ../nptl/sysdeps/unix/sysv/linux/fork.c:131
131 pid = ARCH_FORK ();
(gdb)
In all the above, I used 'signal SIGTRAP' to emulate 'handle SIGTRAP
pass'. As described in "keep_going", 'handle SIGTRAP pass' does have
its place:
/* Do not deliver GDB_SIGNAL_TRAP (except when the user
explicitly specifies that such a signal should be delivered
to the target program). Typically, that would occur when a
user is debugging a target monitor on a simulator: the target
monitor sets a breakpoint; the simulator encounters this
breakpoint and halts the simulation handing control to GDB;
GDB, noting that the stop address doesn't map to any known
breakpoint, returns control back to the simulator; the
simulator then delivers the hardware equivalent of a
GDB_SIGNAL_TRAP to the program being debugged. */
... and I've made use of that myself when implementing/debugging
stubs/monitors. But in these cases, treating these events as SIGTRAP
possibly injects signals in the debuggee they'd never see otherwise,
because you need to use ptrace to enable these special events, which
aren't real signals.
There's more. Take this bit of handle_inferior_event, where we
determine whether a real signal (TARGET_WAITKIND_STOPPED) was random
or not:
if (ecs->event_thread->suspend.stop_signal == GDB_SIGNAL_TRAP)
ecs->random_signal
= !((bpstat_explains_signal (ecs->event_thread->control.stop_bpstat,
GDB_SIGNAL_TRAP)
!= BPSTAT_SIGNAL_NO)
|| stopped_by_watchpoint
|| ecs->event_thread->control.trap_expected
|| (ecs->event_thread->control.step_range_end
&& (ecs->event_thread->control.step_resume_breakpoint
== NULL)));
else
{
enum bpstat_signal_value sval;
sval = bpstat_explains_signal (ecs->event_thread->control.stop_bpstat,
ecs->event_thread->suspend.stop_signal);
ecs->random_signal = (sval == BPSTAT_SIGNAL_NO);
if (sval == BPSTAT_SIGNAL_HIDE)
ecs->event_thread->suspend.stop_signal = GDB_SIGNAL_TRAP;
}
Note that the
if (sval == BPSTAT_SIGNAL_HIDE)
ecs->event_thread->suspend.stop_signal = GDB_SIGNAL_TRAP;
bit is only reacheable for signals != GDB_SIGNAL_TRAP. AFAICS, sval
can only be BPSTAT_SIGNAL_HIDE if nothing in the bpstat returns
BPSTAT_SIGNAL_PASS. So that excludes a "catch signal" for the signal
in question in the bpstat. All other catchpoints that aren't based on
breakpoints behind the scenes call process_event_stop_test directly
(don't pass through here) (well, almost all: TARGET_WAITKIND_LOADED
does have a fall through, but only for STOP_QUIETLY or
STOP_QUIETLY_NO_SIGSTOP, which still return before this code is
reached). Catchpoints that are implemented as breakpoints behind the
scenes can only appear in the bpstat if the signal was GDB_SIGNAL_TRAP
(bkpt_breakpoint_hit returns false otherwise). So that leaves a
target reporting a hardware watchpoint hit with a signal other than
GDB_SIGNAL_TRAP. And even then it looks quite wrong to me to
magically convert the signal into a GDB_SIGNAL_TRAP here too -- if the
user has set SIGTRAP to "handle pass", the program will see a trap
that gdb invented, not one the program would ever see without gdb in
the picture.
Tested on x86_64 Fedora 17.
gdb/
2013-10-31 Pedro Alves <palves@redhat.com>
* infrun.c (handle_syscall_event): Don't set or clear stop_signal.
(handle_inferior_event) <TARGET_WAITKIND_FORKED,
TARGET_WAITKIND_VFORKED>: Don't set stop_signal to
GDB_SIGNAL_TRAP, or clear it. Pass GDB_SIGNAL_0 to
bpstat_explains signal, instead of GDB_SIGNAL_TRAP.
<bpstat handling>: If the bpstat chain wants the signal to be
hidden, then set stop_signal to GDB_SIGNAL_0 instead of
GDB_SIGNAL_TRAP.
gold/
* dwarf_reader.cc (Dwarf_info_reader::visit_type_unit): Add
tu_length parameter. Adjust all callers.
* dwarf_reader.h (Dwarf_info_reader::visit_type_unit): Likewise.
* dwp.cc: Include dwarf.h.
(Section_bounds): New struct type.
(Unit_set): New struct type.
(Dwo_file::Dwo_file): Initialize new data member.
(Dwo_file::read_compunit_index, Dwo_file::read_typeunit_index):
Combine and rename to...
(Dwo_file::read_unit_index): ...this.
(Dwo_file::sized_read_compunit_index)
(Dwo_file::sized_read_typeunit_index): Combine and rename to...
(Dwo_file::sized_read_unit_index): ...this.
(Dwo_file::copy_section): Remove section_name, is_str_offsets
parameters; add section_id parameter.
(Dwo_file::add_cu_set, Dwo_file::add_tu_set): Combine and rename to...
(Dwo_file::add_unit_set): ...this.
(Dwo_file::shndx_map_): Remove.
(Dwo_file::sect_offsets_): New data member.
(Dwp_output_file::Dwp_output_file): Initialize new data members.
(Dwp_output_file::add_section): Rename to...
(Dwp_output_file::add_contribution): ...this.
(Dwp_output_file::add_cu_set): Combine parameters into a struct.
(Dwp_output_file::add_tu_set): Likewise.
(Dwp_output_file::Contribution): New type.
(Dwp_output_file::Section::contributions): New data member.
(Dwp_output_file::Cu_or_tu_set): Remove.
(Dwp_output_file::Section::Section): New ctor.
(Dwp_output_file::Dwp_index::Shndx_pool): Remove.
(Dwp_output_file::Dwp_index::Section_table): New type.
(Dwp_output_file::Dwp_index::Dwp_index): Initialize new data members.
(Dwp_output_file::Dwp_index::enter_set): Change type of "set"
parameter.
(Dwp_output_file::Dwp_index::shndx_pool): Remove.
(Dwp_output_file::Dwp_index::shndx_pool_end): Remove.
(Dwp_output_file::Dwp_index::section_table): New member function.
(Dwp_output_file::Dwp_index::section_table_end): New member function.
(Dwp_output_file::Dwp_index::shndx_pool_size): Remove.
(Dwp_output_file::Dwp_index::section_table_rows): New member function.
(Dwp_output_file::Dwp_index::section_table_cols): New member function.
(Dwp_output_file::Dwp_index::shndx_pool_): Remove.
(Dwp_output_file::Dwp_index::section_table_): New data member.
(Dwp_output_file::Dwp_index::section_mask_): New data member.
(Dwp_output_file::add_output_section): New member function.
(Dwp_output_file::write_new_section): New member function.
(Dwp_output_file::write_contributions): New member function.
(Dwp_output_file::section_id_map_): New data member.
(class Dwo_id_info_reader): Remove.
(class Unit_reader): New class.
(get_dwarf_section_name): New function.
(Dwo_file::read_executable): Adjust initializations of class data.
(Dwo_file::read): Add support for v2 package file format.
(Dwo_file::read_unit_index): Likewise.
(Dwo_file::sized_read_unit_index): Likewise.
(Dwo_file::copy_section): Likewise.
(Dwo_file::add_unit_set): Likewise.
(Dwp_output_file::add_output_section): Likewise.
(Dwp_output_file::add_contribution): Likewise.
(Dwp_output_file::Dwp_index::find_or_add): Use row index to check
for empty slot.
(Dwp_output_file::Dwp_index::enter_set): Add support for v2 package
file format.
(Dwp_output_file::Dwp_index::grow): Use row index to check for empty
slot.
(Dwp_output_file::initialize): Remove unused function.
(Dwp_output_file::finalize): Add support for v2 package file format.
(Dwp_output_file::write_index): Likewise.
* gdb-index.cc (Gdb_index_info_reader::visit_type_unit): Adjust
function prototype.
Correct the patterns in the gdb_test_multiple invocation.
testsuite/
2013-10-30 Andreas Arnez <arnez@linux.vnet.ibm.com>
* gdb.arch/s390-multiarch.exp (test_linux_v2): Add $gdb_prompt to
the patterns in gdb_test_multiple.
As suggested before, rename the S/390-related source files (tdep and nat)
such that "-linux-" occurs in the file name, like with other GNU/Linux
targets. Since no other operating system is currently supported by GDB
on this architecture, this isn't strictly necessary. But the old names
sometimes caused GDB contributors to miss these files when performing a
change that affects all GNU/Linux targets. The latest such incident was
observed here:
https://sourceware.org/ml/gdb-patches/2013-09/msg00619.html
gdb/
2013-10-30 Andreas Arnez <arnez@linux.vnet.ibm.com>
* s390-tdep.h: Rename to...
* s390-linux-tdep.h: ...here.
* s390-tdep.c: Rename to...
* s390-linux-tdep.c: ...here. Adjust #include.
* s390-nat.c: Rename to...
* s390-linux-nat.c: ...here. Adjust #include.
* config/s390/s390.mh: Rename to...
* config/s390/linux.mh: ...here. Reflect rename s390-nat.o ->
s390-linux-nat.o.
* configure.host: Reflect host rename "s390" -> "linux".
* configure.tgt: Reflect rename s390-tdep.o -> s390-linux-tdep.o.
* Makefile.in (ALL_TARGET_OBS): Likewise.
(HFILES_NO_SRCDIR): Reflect rename s390-tdep.h ->
s390-linux-tdep.h.
(ALLDEPFILES): Reflect rename of .c files.
gdb/
2013-10-30 Andreas Arnez <arnez@linux.vnet.ibm.com>
* s390-nat.c: Whitespace cleanup.
* s390-tdep.c: Likewise.
* s390-tdep.h: Remove empty line at end of file.
Currently the disassembler for s390 (by default) assumes that a 31-bit
binary was compiled in "ESA" mode -- and then only disassembles a
limited opcode set. The change upgrades the default to the full "zarch"
opcode set even for 31-bit binaries.
opcodes/
* s390-dis.c (init_disasm): Default to full 'zarch' opcode
availability even for 31-bit programs.
elfcpp/
* powerpc.h (EF_PPC64_ABI): New enum constant.
(STO_PPC64_LOCAL_BIT, STO_PPC64_LOCAL_MASK): Likewise.
(ppc64_decode_local_entry): New function.
(ppc64_encode_local_entry): Likewise.
gold/
* powerpc.cc (Powerpc_relobj::abiversion, set_abiversion,
ppc64_local_entry_offset, ppc64_local_entry_offset,
do_read_symbols): New functions.
(Powerpc_relobj::e_flags_, st_other_): New vars.
(Powerpc_relobj::Powerpc_relobj): Call set_abiversion.
(Powerpc_dynobj::abiversion, set_abiversion): New functions.
(Powerpc_relobj::e_flags_): New var.
(Target_powerpc::first_plt_entry_offset, plt_entry_size): Inline
and adjust for ELFv2.
(Target_powerpc::abiversion, set_abiversion, stk_toc): New functions.
(Powerpc_relobj::do_find_special_sections): Check no .opd in ELFv2.
(Powerpc_dynobj::do_find_special_sections): Likewise.
(Target_powerpc::do_define_standard_symbols): Define ".TOC.".
(Target_powerpc::Branch_info::make_stub): Adjust stub destination
to ELFv2 local entry.
(Target_powerpc::do_relax): No thread safe barriers needed for
ELFv2.
(Output_data_plt_powerpc::initial_plt_entry_size_,
plt_entry_size): Delete. Replace all uses with
first_plt_entry_offset() and plt_entry_size().
(Output_data_plt_powerpc::Output_data_plt_powerpc): Remove
reserved_size parm. Update callers.
(Output_data_plt_powerpc::entry_count): Update.
(Output_data_plt_powerpc::first_plt_entry_offset): Make private
and use Target_powerpc::first_plt_entry_offset().
(Output_data_plt_powerpc::get_plt_entry_size): Similarly and
rename to plt_entry_size.
(Output_data_plt_powerpc::add_ifunc_entry,
add_local_ifunc_entry): Adjust reloc for ELFv2.
(glink_eh_frame_fde_64): Rename to glink_eh_frame_fde_64v1.
(glink_eh_frame_fde_64v2): New.
(Stub_table::plt_call_size): Support ELFv2 sizing.
(Output_data_glink::add_eh_frame): Use the new FDE.
(Output_data_glink::set_final_data_size): Adjust for ELFv2 glink.
(Stub_table::do_write): Write ELFv2 stubs and glink.
(Target_powerpc::Relocate::relocate): Replaces nop after call
with ld 2,24(1) and adjust local offset destination for ELFv2.
This removes the DT_PPC_TLSOPT/DT_PPC64_TLSOPT dynamic tag and replaces
it with DT_PPC_OPT/DT_PPC64_OPT tag to provide the same functionality
and more. This isn't backwards compatible, but the TLSOPT tag hasn't
been used since the tls optimisation support was never submitted to
glibc.
/include/elf/
* ppc.h (DT_PPC_TLSOPT): Delete.
(DT_PPC_OPT, PPC_OPT_TLS): Define.
* ppc64.h (DT_PPC64_TLSOPT): Delete.
(DT_PPC64_OPT, PPC64_OPT_TLS, PPC64_OPT_MULTI_TOC): Define.
bfd/
* elf32-ppc.c (ppc_elf_size_dynamic_sections): Use new DT_PPC_OPT
tag to specify tls optimisation.
* elf64-ppc.c (ppc64_elf_size_dynamic_sections): Likewise.
(ppc64_elf_finish_dynamic_sections): Specify whether multiple
toc pointers are used via DT_PPC64_OPT.
binutils/
* readelf.c (get_ppc_dynamic_type): Replace PPC_TLSOPT with PPC_OPT.
(get_ppc64_dynamic_type): Replace PPC64_TLSOPT with PPC64_OPT.
The toc pointer save slot changes on ELFv2 from 40(1) to 24(1).
* elf64-ppc.c (STK_LR, STK_TOC, STK_LINKER): Define.
(savegpr0_tail, restgpr0_tail, savefpr0_tail, restfpr0_tail)
build_plt_stub, build_tls_get_addr_stub, ppc_build_one_stub,
ppc64_elf_relocate_section): Use new defines.
An ELFv2 PLT entry is simply the address of the target function rather
than three (or two) words to specify entry, toc and static chain. PLT
call stubs are correspondingly simpler and need no thread safety
barrier. The glink resolver stub and branch table also is simplified,
a change that could be applied to ELFv1 too, but isn't as yet.
* elf64-ppc.c (PLT_ENTRY_SIZE, PLT_INITIAL_ENTRY_SIZE): Add htab
parameter and adjust for ELFv2. Update all uses.
(PLT_CALL_STUB_SIZE): Delete.
(ppc64_elf_get_synthetic_symtab): Support new glink layout.
(allocate_dynrelocs): Likewise.
(plt_stub_size, build_plt_stub): Adjust for ELFv2.
(get_r2off): Return 0 for ELFv2 -R.
(ppc_build_one_stub, ppc_size_one_stub): Adjust for ELFv2.
(ppc64_elf_size_stubs): Likewise.
(ppc64_elf_build_stubs): Add new ELFv2 glink.
This defines the ELF symbol st_other field used to encode the number
of instructions between a function "global entry" and its "local entry",
and adds support related to the local entry offset.
include/elf/
* ppc64.h (STO_PPC64_LOCAL_BIT, STO_PPC64_LOCAL_MASK): Define.
(ppc64_decode_local_entry, ppc64_encode_local_entry): New functions.
(PPC64_LOCAL_ENTRY_OFFSET, PPC64_SET_LOCAL_ENTRY_OFFSET): Define.
bfd/
* elf64-ppc.c (struct ppc_stub_hash_entry): Add "other".
(stub_hash_newfunc): Init new ppc_stub_hash_entry field, and one
we forgot, "plt_ent".
(ppc64_elf_add_symbol_hook): Check ELFv1 objects don't have
st_other bits only valid in ELFv2.
(ppc64_elf_merge_symbol_attribute): New function.
(ppc_type_of_stub): Add local_off param to test branch range.
(ppc_build_one_stub): Adjust destinations for ELFv2 locals.
(ppc_size_one_stub, toc_adjusting_stub_needed): Similarly.
(ppc64_elf_size_stubs): Pass local_off to ppc_type_of_stub.
Set "other" field.
(ppc64_elf_relocate_section): Adjust destination for ELFv2 local
calls.
gas/
* config/tc-ppc.c (md_pseudo_table): Add .localentry.
(ppc_elf_localentry): New function.
(ppc_force_relocation): Force relocs on all branches to localenty
symbols.
(ppc_fix_adjustable): Don't reduce such symbols to section+offset.
binutils/
* readelf.c (get_ppc64_symbol_other): New function.
(get_symbol_other): Use it for EM_PPC64.
Defines bits in ELF e_flags to differentiate ELFv2 objects from ELFv2,
adds .abiversion directive to explicitly choose the ABI, and code to
check and automatically select ABI.
include/elf/
* ppc64.h (EF_PPC64_ABI): Define.
bfd/
* elf64-ppc.c (abiversion, set_abiversion): New functions.
(ppc64_elf_get_synthetic_symtab): Handle ELFv2 objects without .opd.
(struct ppc_link_hash_table): Add opd_abi.
(ppc64_elf_check_relocs): Check no .opd with ELFv2.
(ppc64_elf_merge_private_bfd_data): New function.
(ppc64_elf_print_private_bfd_data): New function.
(ppc64_elf_tls_setup): Set htab->opd_abi.
(ppc64_elf_size_dynamic_sections): Don't emit OPD related dynamic
tags for ELFv2.
(ppc_build_one_stub): Use R_PPC64_IRELATIVE for ELFv2 ifunc.
(ppc64_elf_finish_dynamic_symbol): Likewise
binutils/
* readelf.c (get_machine_flags): Display ABI version for EM_PPC64.
gas/
* config/tc-ppc.c: Include elf/ppc64.h.
(ppc_abiversion): New variable.
(md_pseudo_table): Add .abiversion.
(ppc_elf_abiversion, ppc_elf_end): New functions.
* config/tc-ppc.h (md_end): Define.
This change is to support the new ELFv2 ABI, which uses the value in
r12 on function entry to calculate the got/toc pointer.
bfd/
* elf64-ppc.c (build_plt_stub): Switch stubs to use r11 as base
reg and r12 as destination.
(ppc_build_one_stub): Likewise.
(ppc64_elf_build_stubs): Likewise for glink.
ld/testsuite/
* ld-powerpc/tls.s: Add proper .opd entry for _start.
* ld-powerpc/tlstoc.s: Likewise.
* ld-powerpc/relbrlt.d: Update for changed stubs.
* ld-powerpc/tls.d: Update for changed stubs and _start .opd entry.
* ld-powerpc/tls.g: Likewise.
* ld-powerpc/tlsexe.d: Likewise.
* ld-powerpc/tlsexe.g: Likewise.
* ld-powerpc/tlsexe.r: Likewise.
* ld-powerpc/tlsexetoc.d: Likewise.
* ld-powerpc/tlsexetoc.g: Likewise.
* ld-powerpc/tlsexetoc.r: Likewise.
* ld-powerpc/tlsso.d: Likewise.
* ld-powerpc/tlsso.g: Likewise.
* ld-powerpc/tlsso.r: Likewise.
* ld-powerpc/tlstoc.d: Likewise.
* ld-powerpc/tlstoc.g: Likewise.
* ld-powerpc/tlstocso.d: Likewise.
* ld-powerpc/tlstocso.g: Likewise.
* ld-powerpc/tlstocso.r: Likewise.
This changes the behaviour of @h and @ha on PowerPC64 to report errors
on 32-bit overflow. The motivation for this change is that on
PowerPC64, most uses of @h and @ha modifiers and their corresponding
relocations are to build up 32-bit offsets. We'd like to know when
such offsets overflow. Only rarely do people use @h or @ha with the
high 32-bit modifiers to build a 64-bit constant. Those uses will now
need to use two new modifiers, @high and @higha, if the constant isn't
known at assembly time. For now, we won't report overflow at assembly
time..
This also fixes an error when applying some of the HIGHER and HIGHEST
relocations.
include/elf/
* ppc64.h (R_PPC64_ADDR16_HIGH, R_PPC64_ADDR16_HIGHA,
R_PPC64_TPREL16_HIGH, R_PPC64_TPREL16_HIGHA,
R_PPC64_DTPREL16_HIGH, R_PPC64_DTPREL16_HIGHA): New.
(IS_PPC64_TLS_RELOC): Match new tls relocs.
bfd/
* reloc.c (BFD_RELOC_PPC64_ADDR16_HIGH, BFD_RELOC_PPC64_ADDR16_HIGHA,
BFD_RELOC_PPC64_TPREL16_HIGH, BFD_RELOC_PPC64_TPREL16_HIGHA,
BFD_RELOC_PPC64_DTPREL16_HIGH, BFD_RELOC_PPC64_DTPREL16_HIGHA): New.
* elf64-ppc.c (ppc64_elf_howto_raw): Add entries for new relocs.
Make all _HA and _HI relocs report signed overflow.
(ppc64_elf_reloc_type_lookup): Handle new relocs.
(must_be_dyn_reloc, ppc64_elf_check_relocs): Likewise.
(dec_dynrel_count, ppc64_elf_relocate_section): Likewise.
(ppc64_elf_relocate_section): Don't apply 0x8000 adjust to
R_PPC64_TPREL16_HIGHER, R_PPC64_TPREL16_HIGHEST,
R_PPC64_DTPREL16_HIGHER, and R_PPC64_DTPREL16_HIGHEST.
* libbfd.h: Regenerate.
* bfd-in2.h: Regenerate.
gas/
* config/tc-ppc.c (SEX16): Don't mask.
(REPORT_OVERFLOW_HI): Define as zero.
(ppc_elf_suffix): Support @high, @higha, @dtprel@high, @dtprel@higha,
@tprel@high, and @tprel@higha modifiers.
(md_assemble): Ignore X_unsigned when applying 16-bit insn fields.
Add (disabled) code to check @h and @ha reloc overflow for powerpc64.
Handle new relocs.
(md_apply_fix): Similarly.
elfcpp/
* powerpc.h (R_PPC64_ADDR16_HIGH, R_PPC64_ADDR16_HIGHA,
R_PPC64_TPREL16_HIGH, R_PPC64_TPREL16_HIGHA,
R_PPC64_DTPREL16_HIGH, R_PPC64_DTPREL16_HIGHA): Define.
gold/
* powerpc.cc (Target_powerpc::Scan::check_non_pic): Handle new relocs.
(Target_powerpc::Scan::global, local): Likewise.
(Target_powerpc::Relocate::relocate): Likewise. Check for overflow
on all ppc64 @h and @ha relocs.
There's no real need to emit these always: They're needed only if we
indeed want to emit a localized symbol. Hence defer emission until we
at least did the basic early checks that would lead to no such symbol
getting emitted. This in particular avoids emitting such a symbol in
the majority of (if not all) "ld -r" cases.
I hope my set of cross build tests caught all the test cases needing
adjustment - please forgive if I missed a few.
bfd/
2013-10-29 Jan Beulich <jbeulich@suse.com>
* elflink.c (struct elf_outext_info): Add field file_sym_done.
(bfd_elf_final_link): Initialize new field. Move fake STT_FILE
symbol emission from here ...
(elf_link_output_extsym): ... to here.
gas/testsuite/
2013-10-29 Jan Beulich <jbeulich@suse.com>
* gas/microblaze/relax_size.elf: Drop expectation of no longer
present STT_FILE symbol.
* gas/microblaze/relax_size2.elf: Likewise.
ld/testsuite/
2013-10-29 Jan Beulich <jbeulich@suse.com>
* ld-cris/tls-e-tpoffcomm1.d: Drop expectation of no longer
present STT_FILE symbol.
* ld-mmix/bpo-18.d: Likewise.
* ld-mmix/bpo-22.d: Likewise.
* ld-mmix/greg-6.d: Likewise.
* ld-mmix/greg-7.d: Likewise.
* ld-mmix/loc4.d: Likewise.
* ld-mmix/local1.d: Likewise.
* ld-mmix/local3.d: Likewise.
* ld-mmix/local5.d: Likewise.
* ld-mmix/local7.d: Likewise.
* ld-mmix/loct-1.d: Likewise.
* ld-sh/sh64/abi32.xd: Likewise.
* ld-sh/sh64/abi64.xd: Likewise.
* ld-sh/sh64/cmpct1.xd: Likewise.
* ld-sh/sh64/crange1.rd: Likewise.
* ld-sh/sh64/crange2.rd: Likewise.
* ld-sh/sh64/crange3-cmpct.rd: Likewise.
* ld-sh/sh64/crange3-media.rd: Likewise.
* ld-sh/sh64/crange3.rd: Likewise.
* ld-sh/sh64/crangerel1.rd: Likewise.
* ld-sh/sh64/crangerel2.rd: Likewise.
* ld-sh/sh64/mix1.xd: Likewise.
* ld-sh/sh64/mix2.xd: Likewise.
* ld-sh/sh64/shdl32.xd: Likewise.
* ld-sh/sh64/shdl64.xd: Likewise.
I tried to build gdb on the AIX machine in the GCC compile farm
(gcc111), but it failed in a couple of spots because gdb uses "reg" as
a variable name and the AIX <curses.h> defines "reg" to "register".
I saw that we already had a workaround for this lurking in utils.c, so
I just moved that to gdb_curses.h.
This fixed the problem on AIX and still builds on x86-64 Fedora 18.
2013-10-29 Tom Tromey <tromey@redhat.com>
* utils.c (reg): Move undefinition...
* gdb_curses.h: ... here. Update comment to mention AIX.
These references to ChangeLog-mi are stale.
testsuite/gdb.mi/ChangeLog-mi doesn't exist anymore, since:
...
commit 2dd627049d
Author: Andrew Cagney <cagney@redhat.com>
Date: Sat Jun 23 21:47:09 2001 +0000
Rename gdb.mi/ChangeLog-mi to gdb.mi/ChangeLog. Update everything.
...
commit 48efe7049b
Author: Andrew Cagney <cagney@redhat.com>
Date: Mon Jan 12 15:16:44 2004 +0000
Eliminate the old mi/tui specific ChangeLog files as in ...
Added Files:
mi/ChangeLog-1999-2003 testsuite/gdb.mi/ChangeLog-1999-2003
tui/ChangeLog-1998-2003
Removed Files:
mi/ChangeLog testsuite/gdb.mi/ChangeLog tui/ChangeLog
Tested with 'make check RUNTESTFLAGS="--directory=gdb.mi"' on x86_64 Fedora 17.
gdb/testsuite/
2013-10-29 Pedro Alves <palves@redhat.com>
* gdb.mi/mi-console.c, gdb.mi/mi-stack.c: Remove local emacs
variable setting change-log-default-name to ChangeLog-mi.
https://sourceware.org/ml/gdb-patches/2013-08/msg00171.html
gdb/ChangeLog
* infcmd.c (default_print_one_register_info): Use val_print to
print all values even optimized out or unavailable ones. Don't
try to print a raw form of optimized out or unavailable values.
gdb/testsuite/ChangeLog
* gdb.trace/unavailable.exp (gdb_unavailable_registers_test):
Expect <unavailable> pattern.
This test exercises the commands 'add-symbol-file'
and 'remove-symbol-file'.
2013-10-29 Nicolas Blanc <nicolas.blanc@intel.com>
gdb/testsuite
* gdb.base/sym-file-lib.c: New file.
* gdb.base/sym-file-loader.c: New file.
* gdb.base/sym-file-loader.h: New file.
* gdb.base/sym-file-main.c: New file.
* gdb.base/sym-file.exp: New file.
Signed-off-by: Nicolas Blanc <nicolas.blanc@intel.com>
2013-10-29 Nicolas Blanc <nicolas.blanc@intel.com>
gdb/testsuite
* lib/gdb.exp (is_elf_target): New function.
Signed-off-by: Nicolas Blanc <nicolas.blanc@intel.com>
Add the sections of the symbol files that are provided via
'add-symbol-file' to the set of current target sections.
User-added sections are removed upon notification of free_objfile
when their corresponding object file is deleted.
2013-10-29 Nicolas Blanc <nicolas.blanc@intel.com>
* exec.h (add_target_sections_of_objfile): New declaration.
* exec.c (add_target_sections_of_objfile): New function.
* symfile.c (add_symbol_file_command): Update current target sections.
(symfile_free_objfile): New function.
(_initialize_symfile): Register observer for free_objfile events.
Signed-off-by: Nicolas Blanc <nicolas.blanc@intel.com>
2013-10-29 Nicolas Blanc <nicolas.blanc@intel.com>
* NEWS: Add description of the remove-symbol-file command.
gdb/doc
* gdb.texinfo (Commands to Specify Files): Add description
of the remove-symbol-file command.
Signed-off-by: Nicolas Blanc <nicolas.blanc@intel.com>
Alan Modra
Maciej W. Rozycki
Roland McGrath
Tiago Stürmer Daitx
Pedro Alves
Cary Coutant
Andrew Burgess
Ulrich Weigand
Andreas Arnez
Jan Beulich
Tom Tromey
Nicolas Blanc