Markus Deuling
a7dfd0102b
* f-typeprint.c (f_print_type): Handle NULL pointer in VARSTRING
...
properly.
2008-02-28 19:10:42 +00:00
Tom Tromey
258c00ccb0
* infcmd.c (notice_args_read): Print result of get_inferior_args.
2008-02-28 17:43:47 +00:00
Daniel Jacobowitz
8edfe26932
* infcmd.c (kill_if_already_running): Make static. Use
...
target_require_runnable.
* target.c (target_require_runnable): New.
* target.h (target_require_runnable): Declare.
* gdb.texinfo (Starting): Mention always-running targets.
(Target Commands): Add an anchor for load.
(Connecting): Explain continue instead of run.
2008-02-28 16:26:18 +00:00
Daniel Jacobowitz
0d6ba1b16e
* frame.c (reinit_frame_cache): Only annotate if frames were
...
previously valid.
* gdb.base/annota1.exp, gdb.cp/annota2.exp: Update for fewer
frames-invalid annotations.
2008-02-28 16:24:25 +00:00
Pierre Muller
e691325a9c
2008-02-28 Pierre Muller <muller@ics.u-strasbg.fr>
...
* gdb.base/assign.exp: avoid same output for different tests.
2008-02-28 10:32:50 +00:00
Alan Modra
911f096e1a
* elf32-spu.c (mark_functions_via_relocs): Don't assume that
...
the "->start" pointer reaches to function origin, so that we
can handle functions split over more than two sections.
(build_call_tree): Likewise.
(pasted_function): Don't attempt to set fun->start back to the
function origin, just go back one section.
2008-02-28 09:30:27 +00:00
Ulrich Weigand
6fe305f7fb
ChangeLog:
...
* regformats/reg-ppc.dat: Rename "ps" to "msr".
* regformats/reg-ppc64.dat: Likewise.
gdbserver/ChangeLog:
* configure.srv [powerpc64-*-linux*]: Add all files mentioned for
powerpc-*-linux* to srv_regobj and reg_xmlfiles.
* linux-ppc-low.c (ppc_get_pc): Support bi-arch operation.
(ppc_set_pc): Likewise.
(ppc_arch_setup): New function.
(ppc_fill_gregset): Call ppc_collect_ptrace_register instead
of collect_register.
(the_low_target): Use ppc_arch_setup as arch_setup initializer.
2008-02-28 05:57:45 +00:00
Ulrich Weigand
5b0a002e22
* configure.srv [powerpc64-*-linux*]: Use linux-ppc-low.o
...
instead of linux-ppc64-low.o.
* linux-ppc64-low.c: Remove file.
* Makefile.in (SFILES): Remove linux-ppc64-low.c.
(linux-ppc64-low.o): Remove rule.
* linux-ppc-low.c (init_registers_ppc64): Add prototype.
(init_registers_powerpc_64): Likewise.
(ppc_regmap): Conditionally define depending on __powerpc64__.
(ppc_cannot_store_register): Do not special-case "fpscr" when
compiled on __powerpc64__.
(ppc_collect_ptrace_register): New function.
(ppc_supply_ptrace_register): New function.
(ppc_breakpoint): Change type to "unsigned int".
(ppc_breakpoint_at): Change type of "insn" to "unsigned int".
(the_low_target): Conditionally provide initializers for the
arch_setup member depending on __powerpc64__. Install
collect_ptrace_register and supply_ptrace_register members.
2008-02-28 05:55:55 +00:00
Ulrich Weigand
9b4b61c8db
ChangeLog:
...
* features/Makefile (%.dat): Emit xmltarget statement.
* regformats/regdat.sh: Support xmltarget and xmlarch statments.
Generate code to set gdbserver_xmltarget in init_registers_${name}.
* regformats/arm-with-iwmmxt.dat: Regenerate.
* regformats/mips64-linux.dat: Regenerate.
* regformats/mips-linux.dat: Regenerate.
* regformats/rs6000/powerpc-32.dat: Regenerate.
* regformats/rs6000/powerpc-64.dat: Regenerate.
* regformats/rs6000/powerpc-e500.dat: Regenerate.
* regformats/reg-arm.dat: Add xmlarch statement.
* regformats/reg-i386.dat: Likewise.
* regformats/reg-i386-linux.dat: Likewise.
* regformats/reg-x86-64-linux.dat: Likewise.
* regformats/reg-spu.dat: Likewise.
gdbserver/ChangeLog:
* regcache.h (gdbserver_xmltarget): Add extern declaration.
* server.c (gdbserver_xmltarget): Define.
(get_features_xml): Use it to replace "target.xml" and arch_string.
* configure.srv: Remove srv_xmltarget. Add XML files that were
mentioned there to srv_xmlfiles instead. Remove conditional tests
on gdb_cv_arm_iwmmxt, gdb_cv_ppc_altivec, gdb_cv_ppc_spe; set
srv_xmlfiles and srv_regobj to include all possible choices.
* configure.ac (srv_xmltarget): Remove.
(srv_xmlfiles): Do not add "target.xml".
(gdb_cv_arm_iwmmxt, gdb_cv_ppc_altivec, gdb_cv_ppc_spe): Remove
checks for supplementary target information.
* configure: Regenerate.
* Makefile.in (XML_TARGET): Remove.
(target.xml): Remove rule.
(clean): Do not clean up target.xml.
(.PRECIOUS): Do not mention target.xml.
* target.h (struct target_ops): Remove arch_string member.
* linux-low.c (linux_arch_string): Remove.
(linux_target_ops): Remove arch_string initializer.
* linux-low.h (struct linux_target_ops): Remove arch_string member.
* linux-i386-low.c (the_low_target): Remove arch_string initializer.
* linux-x86-64-low.c (the_low_target): Remove arch_string initializer.
* spu-low.c (spu_arch_string): Remove.
(spu_target_ops): Remove arch_string initializer.
* win32-low.c (win32_arch_string): Remove.
(win32_target_ops): Remove arch_string initializer.
* win32-low.h (struct win32_target_ops): Remove arch_string member.
* win32-arm-low.c (the_low_target): Remove arch_string initializer.
* win32-i368-low.c (the_low_target): Remove arch_string initializer.
2008-02-28 05:54:10 +00:00
Ian Lance Taylor
919ed24cbc
Don't check assertions until symbols are finalized. Create an output
...
section if the script uses a data statement with no input sections.
Don't create a loadable segment for the headers if there is no room.
2008-02-28 04:45:47 +00:00
Ian Lance Taylor
15cf077ef4
Put input sections with no flags in output sections with the same name.
2008-02-28 00:51:07 +00:00
Ian Lance Taylor
8851eccaec
From Craig Silverstein: Have Parameters point to General_options.
2008-02-28 00:18:24 +00:00
gdbadmin
f960754aee
*** empty log message ***
2008-02-28 00:00:03 +00:00
Doug Evans
f85b5eccfe
* gdb.base/sigstep.exp (breakpoint_to_handler): Remove setup_kfail
...
for bug 1738.
(breakpoint_to_handler_entry): Ditto.
2008-02-27 23:42:20 +00:00
Alan Modra
ac9d8ffe1a
daily update
2008-02-27 23:00:05 +00:00
Ian Lance Taylor
7019cd2565
Implement -q/--emit-relocs.
2008-02-27 22:38:18 +00:00
Daniel Jacobowitz
20b4711e05
* remote.c (remote_wait, remote_async_wait): Stop if we receive
...
an error.
2008-02-27 21:00:01 +00:00
Daniel Jacobowitz
1843f87b0a
Add changelog entries for last commit.
2008-02-27 20:59:38 +00:00
Daniel Jacobowitz
75feb17dd5
* utils.c (debug_timestamp): New.
...
(vfprintf_unfiltered): Print timestamps if requested.
(show_debug_timestamp): New.
(initialize_utils): Register "set debug timestamp".
* NEWS: Mention "set debug timestamp". Add GDB 6.8 section.
* gdb.texinfo (Debugging Output): Document "set debug timestamp".
2008-02-27 20:50:49 +00:00
Joel Brobecker
b40e7bf371
* gdb.base/ending-run.exp: Use the first line of code inside
...
function body to test breakpoints.
* gdb.mi/mi-break.exp, gdb.mi/mi2-break.exp: Adjust the actual
location where the breakpoint is inserted when using the line
where a function is declared. Fix typo in the description of
one of the tests.
* gdb.mi/mi-simplerun.exp, gdb.mi/mi2-simplerun.exp: Likewise.
2008-02-27 20:29:31 +00:00
Joel Brobecker
6a048695b3
* breakpoint.c (skip_prologue_sal): New function.
...
(resolve_sal_pc): Adjust SAL past prologue if the SAL was
computed from a line number.
2008-02-27 20:27:49 +00:00
Joel Brobecker
0b998f4963
* features/rs6000/power-core.xml, features/rs6000/power64-core.xml
...
features/rs6000/powerpc-601.xml, features/rs6000/rs6000.xml:
Set PC register type to "code_ptr".
* features/rs6000/powerpc-32.c, features/rs6000/powerpc-403.c,
features/rs6000/powerpc-403gc.c, features/rs6000/powerpc-505.c,
features/rs6000/powerpc-601.c, features/rs6000/powerpc-602.c,
features/rs6000/powerpc-603.c, features/rs6000/powerpc-604.c,
features/rs6000/powerpc-64.c, features/rs6000/powerpc-7400.c,
features/rs6000/powerpc-750.c, features/rs6000/powerpc-860.c,
features/rs6000/powerpc-e500.c, features/rs6000/rs6000.c:
Regenerate.
2008-02-27 20:20:51 +00:00
Catherine Moore
c8087d4c04
* ld-cris/libdso-10.d: Update expected output for the Dynamic
...
Section to allow an arbitrary number of spaces.
2008-02-27 17:06:42 +00:00
Catherine Moore
ad9563d653
* elf.c ( _bfd_elf_print_private_bfd_data): Call
...
elf_backend_get_target_dtag if defined.
* elf32-mips.c (elf_backend_get_target_dtag): Define.
* elf64-mips.c: Likewise.
* elfn32-mips.c: Likewise.
* elfxx-mips.c (_bfd_mips_elf_get_target_dtag): New.
* elfxx-mips.h (_bfd_mips_elf_get_target_dtag): Declare.
* elf-bfd.h (elf_backend_get_target_dtag): Add prototype.
* elfxx-target.h (elf_backend_get_target_dtag): Add default.
(elf_backend_data): Add elf_backend_get_target_dtag.
2008-02-27 17:06:06 +00:00
Pierre Muller
2faca73a4e
2008-02-27 Pierre Muller <muller@ics.u-strasbg.fr>
...
* gdb.arch/i386-sse.exp: avoid same output for two breakpoint setting
tests.
2008-02-27 15:52:33 +00:00
Pierre Muller
6f439c366a
2008-02-27 Pierre Muller <muller@ics.u-strasbg.fr>
...
* gdb.base/args.exp: avoid same output for tests
with single quotes.
2008-02-27 15:46:46 +00:00
Ian Lance Taylor
1890b46591
Fix handling of ENTRY in linker script.
2008-02-27 15:09:16 +00:00
Nick Clifton
af7329f0ff
PR 3134
...
* h8300.h (h8_opcodes): Add an encoding for a mov.l instruction
with a 32-bit displacement but without the top bit of the 4th byte
set.
* gas/h8300/pr3134.s: New test.
* gas/h8300/pr3134.d: Expected disassembly
* gas/h8300/h8300.exp: Run the new test.
* gas/h8300/h8300-coff.exp: Fix test for COFF based ports to
accept h8300-rtemscoff not just h8300-rtems.
2008-02-27 12:33:43 +00:00
Nick Clifton
b14f9da0ae
oops - omitted from previous delta
2008-02-27 11:11:06 +00:00
Nick Clifton
20c0b65dab
* ar.c (usage): Mention -t command line switch.
...
* doc/binutils.texi (ranlib): Document -t command line switch.
2008-02-27 10:56:20 +00:00
Ulrich Weigand
ee1a7ae440
* linux-low.h (struct linux_target_ops): Replace left_pad_xfer field
...
by collect_ptrace_register and supply_ptrace_register hooks.
* linux-low.c (fetch_register): Use supply_ptrace_register callback
instead of checking for the_low_target.left_pad_xfer.
(usr_store_inferior_registers): Use collect_ptrace_register callback
instead of checking for the_low_target.left_pad_xfer.
* linux-s390-low.c (s390_collect_ptrace_register): New function.
(s390_supply_ptrace_register): Likewise.
(s390_fill_gregset): Call s390_collect_ptrace_register.
(the_low_target): Update.
* linux-ppc64-low.c (ppc_collect_ptrace_register): New function.
(ppc_supply_ptrace_register): Likewise.
(the_low_target): Update.
* linux-i386-low.c (the_low_target): Update.
* linux-x86-64-low.c (the_low_target): Update.
2008-02-27 03:33:07 +00:00
Ulrich Weigand
d61ddec435
* configure.srv [s390x-*-linux*]: Set srv_regobj to include both
...
reg-s390.o and reg-s390x.o.
* linux-low.c (new_inferior): New global variable.
(linux_create_inferior, linux_attach): Set it.
(linux_wait_for_process): Call the_low_target.arch_setup after the
target has stopped for the first time.
(initialize_low): Do not call the_low_target.arch_setup.
* linux-s390-low.c (s390_get_pc): Support bi-arch operation.
(s390_set_pc): Likewise.
(s390_arch_setup): New function.
(the_low_target): Use s390_arch_setup as arch_setup routine.
* regcache.c (realloc_register_cache): New function.
(set_register_cache): Call it for each existing regcache.
2008-02-27 03:31:05 +00:00
Ulrich Weigand
d05b4ac3aa
gdb/ChangeLog:
...
* regformats/regdat.sh: Rename init_registers function in
generated file to init_registers_${name}.
* regformats/reg-crisv32.dat: Set "name" to crisv32.
* regformats/reg-ppc64.dat: Set "name" to ppc64.
* regformats/reg-s390x.dat: Set "name" to s390x.
gdbserver/ChangeLog:
* server.h (init_registers): Remove prototype.
* linux-low.h (struct linux_target_ops): Add arch_setup field.
* linux-low.c (initialize_low): Call the_low_target.arch_setup ()
instead of init_registers ().
* linux-arm-low.c (init_registers_arm): Add prototype.
(init_registers_arm_with_iwmmxt): Likewise.
(the_low_target): Add initializer for arch_setup field.
* linux-cris-low.c (init_registers_cris): Add prototype.
(the_low_target): Add initializer for arch_setup field.
* linux-crisv32-low.c (init_registers_crisv32): Add prototype.
(the_low_target): Add initializer for arch_setup field.
* linux-i386-low.c (init_registers_i386_linux): Add prototype.
(the_low_target): Add initializer for arch_setup field.
* linux-ia64-low.c (init_registers_ia64): Add prototype.
(the_low_target): Add initializer for arch_setup field.
* linux-m32r-low.c (init_registers_m32r): Add prototype.
(the_low_target): Add initializer for arch_setup field.
* linux-m68k-low.c (init_registers_m68k): Add prototype.
(the_low_target): Add initializer for arch_setup field.
* linux-mips-low.c (init_registers_mips_linux): Add prototype.
(init_registers_mips64_linux): Likewise.
(the_low_target): Add initializer for arch_setup field.
* linux-ppc-low.c (init_registers_ppc): Add prototype.
(init_registers_powerpc_32, init_registers_powerpc_e500): Likewise.
(the_low_target): Add initializer for arch_setup field.
* linux-ppc64-low.c (init_registers_ppc64): Add prototype.
(init_registers_powerpc_64): Likewise.
(the_low_target): Add initializer for arch_setup field.
* linux-s390-low.c (init_registers_s390): Add prototype.
(init_registers_s390x): Likewise.
(the_low_target): Add initializer for arch_setup field.
* linux-sh-low.c (init_registers_sh): Add prototype.
(the_low_target): Add initializer for arch_setup field.
* linux-x86-64-low.c (init_registers_x86_64_linux): Add prototype.
(the_low_target): Add initializer for arch_setup field.
* linux-xtensa-low.c (init_registers_xtensa): Add prototype.
(the_low_target): Add initializer for arch_setup field.
* win32-low.h (struct win32_target_ops): Add arch_setup field.
* win32-low.c (initialize_low): Call the_low_target.arch_setup ()
instead of init_registers ().
* win32-arm-low.c (init_registers_arm): Add prototype.
(the_low_target): Add initializer for arch_setup field.
* win32-i386-low.c (init_registers_i386): Add prototype.
(the_low_target): Add initializer for arch_setup field.
* spu-low.c (init_registers_spu): Add prototype.
(initialize_low): Call initialie_registers_spu () instead of
initialize_registers ().
2008-02-27 03:27:40 +00:00
Daniel Jacobowitz
a5d9d57db1
2008-02-26 Greg Law <glaw@undo-software.com>
...
* regcache.c (registers_changed): Call reinit_frame_cache.
2008-02-27 01:07:42 +00:00
Daniel Jacobowitz
e25c958c98
* configure.tgt (sh-*-linux*): Match sh*. Add glibc-tdep.o.
...
* sh-linux-tdep.c (sh_linux_init_abi): Use glibc_skip_solib_resolver
and svr4_fetch_objfile_link_map.
* Makefile.in (sh-linux-tdep.o): Update.
2008-02-27 01:06:21 +00:00
gdbadmin
29dccb240b
*** empty log message ***
2008-02-27 00:00:02 +00:00
Alan Modra
4bde7761b6
daily update
2008-02-26 23:00:05 +00:00
Ian Lance Taylor
a5dc070655
From Craig Silverstein: rework handling of Script_options.
2008-02-26 22:48:08 +00:00
Thiago Jung Bauermann
5daa78cc6f
* amd64-tdep.c (amd64_classify): Add support for decimal float
...
types.
* i386-tdep.c (i386_return_value): Make 128-bit decimal float
use the struct return convention.
2008-02-26 22:23:45 +00:00
Ian Lance Taylor
cd72c29180
From Craig Silverstein: implement -z max-page-size and -z
...
common-page-size.
2008-02-26 22:10:32 +00:00
Ian Lance Taylor
45aa233bdc
From Craig Silverstein: rename option functions for future option
...
handling rewrite.
2008-02-26 21:45:30 +00:00
H.J. Lu
58abc3ebf6
2008-02-26 H.J. Lu <hongjiu.lu@intel.com>
...
* gas/i386/jump.d: Updated for COFF.
2008-02-26 16:18:16 +00:00
Joseph Myers
b67ce46f15
* config/default.exp (gcc_gas_flag, dlltool_gas_flag): Define to
...
empty for testing an installed toolchain.
2008-02-26 12:29:10 +00:00
Nick Clifton
3276085244
* objdump.c (objdump_print_addr): If displaying file offsets, show
...
the offset even if there are no symbols available.
(dump_section): Display nothing if none of the section is going to
be dumped. Display the file offset, if requested, of the location
from where the dump starts.
* doc/binutils.texi (objdump): Mention that dumping via the -s
switch is also affected by the -F option.
2008-02-26 08:44:10 +00:00
Alan Modra
625af618e7
* elf32-ppc.c (ppc_elf_check_relocs): Set pointer_equality_needed
...
for R_PPC_REL32 syms. Don't set non_got_ref on branch reloc syms,
and assume branch relocs are not dynamic when non-shared.
(readonly_dynrelocs): New function, split out from..
(maybe_set_textrel): ..here, renamed from old readonly_dynrelocs.
(ppc_elf_adjust_dynamic_symbol): For symbols generating plt entries,
clear non_got_ref..
(allocate_dynrelocs): ..and don't set u.def for undefined weak.
Do allow dynamic relocs on undefined symbols.
(ppc_elf_adjust_dynamic_symbol): Use readonly_dynrelocs.
(ppc_elf_relocate_section): Mirror dynamic reloc changes in
check_relocs.
(ppc_elf_finish_dynamic_symbol): Don't give a warning on weak
plt symbols needing pointer_equality_needed.
2008-02-26 08:36:03 +00:00
Nick Clifton
fa0d8a3eea
Re-apply this patch which was accidentally deleted:
...
2006-05-16 Carlos O'Donell <carlos@codesourcery.com>
* doc/binutils.texi: Use "Binutils Index" for index name.
2008-02-26 08:25:46 +00:00
Vladimir Prus
54e52265e2
* breakpoint.c (print_one_breakpoint_location): Revert Enb field
...
to old format. Discard breakpoint address if shared library is
unloaded.
(breakpoint_1): Adjust formatting of table header accordingly.
2008-02-26 08:14:11 +00:00
gdbadmin
5ee461eeda
*** empty log message ***
2008-02-26 00:00:04 +00:00
Alan Modra
a576afd1e2
daily update
2008-02-25 23:00:06 +00:00
Nick Roberts
b3db744786
(Set Breaks): Revert description of Enb column of
...
breakpoint table.
2008-02-25 20:34:40 +00:00