debug section is new, allocate an extra 12 bytes at its start. If
".stabs" type is N_SO, fill in filename symbol field of that first
entry. Return early if "goof", to simplify later code slightly.
(adjust_stab_sections): New function.
(elf_frob_file): Apply adjust_stab_sections to each section.
* obj-elf.c (obj_elf_section, obj_elf_previous): No longer static.
* obj-elf.h (obj_elf_section, obj_elf_previous): Declare.
* tc-sparc.c (md_pseudo_table): Call them for "pushsection"
and "popsection", and call cons for "uaword" and "uahalf".
* obj-elf.c (obj_elf_version): Use English in error messages.
* tc-sparc.c (md_apply_fix, case BFD_RELOC_64): New case,
parallel to BFD_RELOC_32.
(tc_gen_reloc): Accept BFD_RELOC_64.
pseudo-op with a poc_handler field of NULL, ignore it and treat it
as an instruction instead.
* config/tc-m88k.c (md_pseudo_table): Add "set" with a NULL
poc_handler field.
* configure.in (case ${generic_target}): Add i[34]86-*-sysv4*
case to set obj_format=elf. Must go before i386-*-sysv* case that
sets obj_format=coffbsd. Add *-*-sysv4* to *-*-elf and
*-*-solaris case, and move to before *-sysv* case that wants to
set obj_format to coff.
* config/tc-i386.c (i386_operand): Change all 'exp.X_op' to
'exp->X_op'.
* config/tc-i386.c (md_apply_fix): Fix valp to be 'valueT *' for
BFD_ASSEMBLER case.
up opcodes as pseudo-ops even if they don't start with '.'.
* config/tc-m88k.h (NO_PSEUDO_DOT): Define.
* config/tc-m88k.c (md_assemble): Removed special pseudo-op
handling.
(md_apply_fix): Set fx_offset to the upper 16 bits of the reloc.
Output the low 16 bits for RELOC_HI16, not the high 16 bits.
* config/obj-coffbfd.c (do_relocs_for): If TC_M88K, set the
r_offset field of the reloc to the fixup offset.
(fixup_segments): If TC_M88K, don't warn about fixup overflows.
* doc/as.texinfo: Minor updates.
(previous_section, previous_subsection): New vars.
(obj_elf_section): Save current place in case DWARF code wants us
to pop back to it. Handle unquoted section name as well as quoted
section name. Don't crash on invalid strings.
(obj_pseudo_table): Handle new pseudos "previous", "2byte", and "4byte".
undefined symbols.
Fixes PR 2997.
* read.c (s_data), config/obj-coffbfd.c (obj_coff_data): If -R,
switch to text section rather than data section.
Fixes PR 2971.
* config/tc-mips.c: Many changes to support simple assembler
optimization.
(insn_label, prev_insn, prev_prev_insn, dummy_opcode,
prev_insn_valid, prev_insn_frag, prev_insn_where,
prev_insn_fixp, prev_insn_is_delay_slot): New static
variables.
(insn_uses_reg, mips_no_prev_insn, mips_emit_delays,
mips_align, s_stringer, s_mips_space): New static functions.
(mips_define_label): New global function.
(md_pseudo_table): For "ascii", "asciz", "asciiz", call
s_stringer. Changed argument to float_cons from 0 or 1 to 'f'
or 'd'. For "space" call s_mips_space.
(md_begin): Call mips_no_prev_insn.
(append_insn): Only insert necessary NOP instructions.
(macro): Call mips_emit_delays before setting mips_noreorder.
Increment and decrement mips_noreorder rather than using
save_reorder_condition. Don't bother to use noreorder in
M_L_DOB and M_L_DAB, since append_insn will not insert a NOP.
(md_atof): Handle floating point numbers correctly for both
big and little endian targets.
(s_align, s_cons): Call mips_align rather than frag_align.
(s_change_seg, s_cons): Call mips_emit_delays.
(s_float_cons): Let float_cons do the work.
(s_mipsset): Call mips_emit_delays when setting noreorder.
* config/tc-mips.h (tc_frob_label): Define to be
mips_define_label.
by md_pcrel_from if we are relocating against a symbol (we still
need md_pcrel_from for a PC relative relocation within the same
file).
* config/tc-m88k.c (md_pcrel_from): Corrected return value.
* configure.in (m88k-*-coff*): New target. Use coffbfd and
m88kcoff.
* config/m88kcoff.mt: New file.
* read.c (lex_type): New macro LEX_AT to set lex type of '@'.
(pseudo_set): Handle difference of symbols in different fragments
by saving the entire expression as the value of the symbol.
* symbols.c (resolve_symbol_value): Resolve difference
expressions.
* config/obj-coffbfd.c (obj_pseudo_table): If TC_M88K, accept
"sdef" as a synonym for "def".
* config/obj-coffbfd.h: If TC_M88K, include coff/m88k.h and set
TARGET_FORMAT.
(S_IS_LOCAL): Any symbol which includes \001 in the name is local.
* config/tc-m88k.c, config/tc-m88k.h: Numerous changes to bring
m88k port up to date, and to add COFF support.
as the value of a symbol.
* struc-symbol.h (struct symbol): Removed sy_forward field. Added
sy_resolved and sy_resolving single bit fields.
* symbols.c (symbol_new): Don't initialize sy_forward field.
(resolve_symbol_value): New function to adjust symbol value by
fragment address, using recursion to resolve forward symbols.
* symbols.h: Added prototype for new function.
* read.c (pseudo_set): Set symbolP->sy_value to an undefined
expression rather than setting symbolP->sy_forward.
* write.c (write_object_file): Use resolve_symbol_value on
symbols, keeping the common case (the old behaviour) inline.
* config/obj-aout.c (obj_aout_frob_symbol): Removed sy_forward
handling (subsumed by write.c change).
* config/obj-coff.c, config/obj-coffbfd.c (obj_coff_val): Set
sy_value rather than sy_forward.
* config/obj-coffbfd.c (obj_coff_endef, yank_symbols): Check
expression segment rather than sy_forward.
(yank_symbols): Use resolve_symbol_value.
(crawl_symbols): Removed extra pass over symbols.
* config/obj-aout.c, config/obj-bout.c, config/obj-coff.c,
config/obj-vms.c (obj_crawl_symbol_chain): Removed extra pass over
symbols which handled sy_forward; use resolve_symbol_value
instead.
* config/obj-coff.h, config/obj-coffbfd.h (obj_frob_forward_symbol):
Define.
* config/obj-elf.c (obj_elf_stab_generic): Check expression
segment rather than sy_forward.
* config/obj-vms.c (VMS_Check_For_Main): Don't initialize
sy_forward; do initialize sy_resolved and sy_resolving.
* config/tc-hppa.h (STAB_FIXUP): Use sy_value, not sy_forward.
just a longword:
* struc-symbol.h: New field sy_value.
* as.h: Include expr.h before struc-symbol.h.
* expr.h: Use struct symbol rather than symbolS.
* symbols.c (S_GET_VALUE, S_SET_VALUE): Rewrote to retrieve value
of sy_value field; compile unconditionally, not just if
BFD_ASSEMBLER.
* symbols.h: Compile S_{SG}ET_VALUE prototypes unconditionally.
* write.c (write_object_file): Set BFD symbol value to gas symbol
value.
* config/obj-aout.h, config/obj-bout.h, config/obj-coff.h,
config/obj-coffbfd.h, config/obj-generic.h, config/obj-vms.h
(S_GET_VALUE, S_SET_VALUE): Removed macro definitions.
* config/obj-ieee.c (S_GET_VALUE, S_SET_VALUE): Removed.
* config/obj-coff.h, obj-coffbfd.h: Rewrote several macros to use
S_GET_VALUE rather than ost_entry.n_value.
* config/obj-aout.c (obj_symbol_to_chars), config/obj-bout.c
(obj_symbol_to_chars), config/obj-coff.c (obj_symbol_to_chars),
config/obj-coffbfd.c (symbol_to_chars): Get value to write out
using S_GET_VALUE--don't assume it is already set.
* config/obj-ieee.c (do_symbols): Set BFD symbol value to gas
symbol value.
* config/obj-vms.c (various): Don't assign directly to
S_GET_VALUE; use S_SET_VALUE instead.
Ken Raeburn