of aix4 need different handling than aix3.
* configure: Updated.
* config/powerpc/{aix4.mh,aix4.mt,tm-ppc-aix4.h}: New files
specific to aix4 support on the power pc.
* config/powerpc/tm-ppc-aix.h (DONT_RELOCATE_SYMFILE_OBJFILE): Do
not defined. The aix4 specific target files will do that.
* config/rs6000/{aix4,mh,aix4,mt,tm-rs6000-aix4.h}: New files
specific to aix4 support on the rs6000.
* config/rs6000/tm-rs6000.h (CONVERT_FROM_FUNC_PTR_ADDR): Don't
do the conversion if the pointer is not a magic aix function
pointer.
* rs6000-tdep.c: Include objfiles.h and symtab.h.
(is_magic_function_pointer): New function.
* rs6000-tdep.c (skip_prologue): Refine check for frameless
functions. Handle b .+4 emitted by aix4 compilers. Only
allow one load of a minimal toc pointer. Handle aix4 compiler's
code for alloca.
* rs6000-tdep.c (find_toc_address): Report an error if no toc was
found rather than possibly core dumping.
* partial-stab.h: Handle extra field generated by the aix4 compiler
for enumerations.
* stabsread.c (read_enum_type): Likewise.
"backtrace through signal handler" to "i*86-*-sysv4*".
* gdb.base/signals.exp: Add xfail for "'next' behaved as
continue" case. Add "known SVR4 bug" to fail message.
Add "i*86-*-bsdi2.0" xfail for "handle all print".
Add "i*86-*-bsdi2.0" xfail for "backtrace in signals_tests_1".
* gdb.base/ptype.exp: Add "i*86-*-sysv4*" xfail for
"whatis unnamed typedef'd enum..." and "ptype t_char_array".
* gdb.base/langs.exp: Add "i*86-*-sysv4*" xfail for
"up to foo in langs.exp", "show language at foo in
langs.exp", "up to cppsub_ in langs.exp", "show
language at cppsub_ in langs.exp", "up to fsub in
langs.exp", and "show language at fsub in langs.exp".
* gdb.base/corefile.exp: Add "i*86-*-sysv4*" to xfail for
"bactrace in corefile.exp".
* gdb.base/callfuncs.exp: Change xfail to "i*86-*-*" for
"call inferior function with struct - returns float" and
"call inferior function with struct - returns double".
and target.
(powerpc-*-eabi*): Don't set configdirs.
(powerpcle-*-eabi*0: Likewise.
* configure: Updated.
* rs6000-nat.c (vmap_ldinfo): Don't relocate data addresses
for the main objfile if DONT_RELOCATE_SYMFILE_OBJFILE is
defined.
* config/powerpc/{aix.mh,aix.mh}: Host and target makefile fragments
for powerpc running aix4.
* config/powerpc/{nm-aix.h, tm-ppc-aix.h, xm-aix.h}: Native, target
and host include files for powerpc running aix4.
More of Mike's powerpc work + minor changes.
* gdb.disasm/sh3.exp: Run the sh3 disassembler tests.
* gdb.disasm/configure.in (sh-*-*): Use sh3.mt makefile fragment.
* gdb.disasm/sh3.mt: Makefile fragment for sh3 ests.
sh3e disassembler tests. Sanitized out for now.
corefile.exp from linuxaout to all linux.
* gdb.base/sigall.exp (test_one_sig): Specifically deal with
cases where we miss the breakpoint at the signal handler
for some reason. Setup xfail for linuxoldld/linuxaout and
getting SIGIO. Setup xfail for linuxoldld/linuxaout for
hitting SIGURG breakpoint.
* gdb.base/signals.exp: Setup xfail for "next" acting like
continue to add linuxoldld. Setup xfail for all linux for
"next to handler in signals_tests_1", "backtrace in
signals_tests_1", "continue to func1", "pass SIGUSR1",
and continue to handler".
(SKIP_TRAMPOLINE_CODE): Define.
* alpha-tdep.c (alpha_frame_saved_pc): Use pc_reg field from
frame to find the saved pc register.
(alpha_saved_pc_after_call): Skip over shared library trampoline
before trying to find the saved pc register.
(find_proc_desc): Copy PROC_PC_REG from found proc_desc
to heuristic proc_desc.
(init_extra_frame_info): Initialize pc_reg field in frame.
values whose length is less than the register size for big endian
targets.
* alpha-tdep.c (alpha_extract_return_value,
alpha_store_return_value): Use alpha_convert_register_to_*
to handle functions returning "float" correctly.
inferior functions and return various types.
* gdb.base/callfuncs.c: Add functions to receive a struct
and return a member of the struct, in various types.
before trying to determine the start of the function.
(skip_prologue): Skip subroutine call which might save the
floating point registers only if it is within the first three
instructions.
Reinstate setting of alloca_reg if setup of a gcc frame pointer
is found.
(frame_get_cache_fsr): Use new fields in rs6000_framedata.
is bash or ksh, which handles "... $(TCL) ..." by trying to run TCL.
Changed configure.in and regenerated configure, including two lines
apparently inserted by custom cygnus version of autoconf 2.4.
read_next_frame_reg to alpha_find_saved_regs, handle saved
floating point registers.
* mips-tdep.c: Move sigtramp handling of saved registers from
read_next_frame_reg to mips_find_saved_regs, handle saved
floating point registers.
* config/mips/tm-irix3.h, config/mips/tm-irix5.h,
config/mips/tm-mipsv4.h (SIGFRAME_FPREGSAVE_OFF): Define.
* sparc-tdep.c (sparc_pc_adjust): Fix check for `unimp'
instruction to handle functions returning structures with
large sizes properly.
"call function when asleep" and "send end of file".
* gdb.base/corefile.exp: Add "i*86-*-linuxaout" to xfail list
for "backtrace in corefile.exp".
* gdb.base/a1-selftest.exp: Add "i*86-*-linux*" to xfail list
for "backtrace through signal handler".
* gdb.base/corefile.exp: Make sure we actually generate a core file
before trying the core tests. Some systems allow the user to suppress
generation of core files and default to that (linux for example).
* gdb.base/signals.exp: Change xfail for "next" acting like "continue"
from "i*86-*-linux" to "i*86-*-linuxaout". Works with ELF beta.
and for thread_alive change from a couple weeks ago.
(extended_remote_ops): Declare and define a new target vector
for the extended remote protocol.
(extended_remote_restart): New function to restart the remote
server & process.
(remote_open): Just a stub routine.
(extended_remote_open): New function to start a remote session
using the extended gdb remote protocol.
(remote_open_1): New function containing code common to both
remote_open and extended_remote_open.
(remote_mourn, extended_remote_mourn, remote_mourn_1): Similarly.
(extended_remote_create_inferior): New function for the extended
remote target.
(initialize_remote): Add the extended_remote_ops target vector.
* gdbserver/server.c (main, case '!'): Set extended_protocol.
(main, case 'k'): If the extended protocol is in use, kill the
inferior then start a new one.
(main, case 'R'): New command to restart the remote server and
inferior process. Only supported when using the extended
protocol.
(main, server loop): If the inferior terminates while using the
extended protocol then start a new one. If getpkt fails when
using the extended protocol then exit.
New extended remote gdb protocol support; intended mainly for use with
the gdbserver testing framework that I'll be checking in soon. Also
useful for interactive remote debugging since it supports "run".
gdb tests (step.exp and step2.exp).
* config/mt-lynx (STEP_EXECUTABLE): Define.
(THREADFLAGS): Define.
Hiro's test for 6100 and a crude test of my own. They both need some
major cleanup for non-lynx hosts; both are also a little too loose in
their checks. But I'm too burnt out on lynx to address either concern.
further notice.
Looks like a bug in the lynx2.2.2 kernel scroggs the stack pointer in
these tests leading to massive failures. I've sent a nice small concise
example to Mark Rome @ lynx. Severe braindamage.
typo in setting up configdirs for native builds.
* gdb.base/return.exp: Fix typo in return double test.
* gdb.base/return.c (tmp2, tmp3): Made global to inhibit the
compiler from optimizing them away.
means the process is single threaded, so there's no need to add
it to the thread list. Handle case where multi-threaded process
reverts back to a single-threaded process.
after the inferior gdb has started.
'cuz lynx may take a couple minutes to start the inferior gdb...
* gdb.base/a2-run.exp: Handle gdb echoing more than one cr-lf
after each command.
* gdb.base/funcargs.exp: Likewise.
* gdb.base/gdbvars.exp: Likewise.
* gdb.base/interrupt.exp: Likewise.
* gdb.base/list.exp: Likewise.
* gdb.base/watchpoint.exp: Likewise.
* gdb.c++/demangle.exp: Likewise.
* gdb.c++/inherit.exp: Likewise.
* gdb.chill/chexp.exp: Likewise.
* gdb.fortran/exprs.exp: Likewise.
Just in case we can't get a version of expect that sets the tty modes
right on lynx to avoid this problem.
started after sending a "run" command to gdb.
(text_next_with_recursion): Don't check the output from the
program's printf statement. Instead just make sure the program
exited.
* infrun.c (wait_for_inferior): Set the convenience variable
$_exitcode to the termination code of the inferior.
* top.c (quit_command): Accept optional expression to use
as parameter to exit().
* gdbserver/Makefile.in (SFILES): Add low-hppabsd.c.
* config/hppabsd.mh (XDEPFILES): Add ser-tcp.o
(GDBSERVER_DEPFILES): Add low-hppabsd.o
* config/hppaosf.mh: LIkewise.
Needed this for the gdbserver framework development. Trying to avoid doing
development work on lynx for the obvious reasons.
* gdbserver/Makefile.in (SFILES): Add low-hppabsd.c.
* config/hppabsd.mh (XDEPFILES): Add ser-tcp.o
(GDBSERVER_DEPFILES): Add low-hppabsd.o
* config/hppaosf.mh: LIkewise.
Needed this for the gdbserver framework development. Trying to avoid doing
development work on lynx for the obvious reasons.
to char, since everything passed in and out of dcache is char or casted
to appropriate type anyway.
(dcache_alloc): Move assignment of db out of test and combine separate
tests into if-else.
(dcache_peek_byte): Change ptr from unsigned char* to char*.
(dcache_peek_byte): Remove now unnecessary cast in read_memory call.
(dcache_peek): Change cast of incoming data arg.
(dcache_poke): Change cast of addr of incoming data arg.
(dcache_info): Mask data passed to printf_filtered to lsbyte only.
(dcache_info): Change printf_filtered arg from "% 2x" to " %2x".
* target.c (debug_to_thread_alive): Change return type to int and
return zero, for type compatibility with other *_thread_alive funcs.
(cleanup_target): Change cast of ignore function to match type of the
to_thread_alive member.
* defs.h (error_hook): Add ATTR_NORETURN.
* defs.h (NORETURN, ATTR_NORETURN): Switch from volatile to
__attribute__ method with gcc 2.7, to avoid gcc 2.6.3 bug.
* remote.c (remote_wait): Cast first arg to strtol, strchr, and strncmp
to "const char *" from "unsigned char *".
(remote_wait): Cast arg to putpkt and strcpy from "unsigned char *" to
"char *".
(remote_wait): Change printf format for long arg from "%d" to "%ld".
(getpkt): Remove unused variable "bp".
(remote_fetch_word, remote_store_word): Ifdef out apparently unused
functions.
* breakpoint.c (watchpoint_check): Removed unused variables
"saved_level" and "saved_frame".
* valops.c (value_arg_coerce): Add other enum TYPE_CODE_* and
default cases to switch for completeness.
* infrun.c (wait_for_inferior): Enclose "have_waited" label
in #ifdef that matches the one in which it is referenced.
* ser-unix.c (hardwire_noflush_set_tty_state): Enclose otherwise
unused variable "state" in #ifdef that matches one in which it is
referenced.
* eval.c (evaluate_subexp_standard): Remove unused variable "var".
* eval.c (evaluate_subexp_standard): Remove unused variable "tmp_symbol".
* valarith.c (value_subscript): Remove unused variable "lowerbound",
which is redeclared in a nested scope prior to use.
* printcmd.c (print_frame_nameless_args): Use "%ld" to print long
arg, not "%d".
* {mem-break.c, remote-pa.c, remote.c, saber.suppress}:
Remove unused static var "check_break_insn_size".
* buildsym.c (finish_block): Add other enum LOC_* and default
cases to switch for completeness.
ch-lang.c (type_lower_upper): Removed unused label "retry".
Add other enum TYPE_* and default cases to switch for completeness.
* f-typeprint.c (f_type_print_args): Ifdef out unused function
that may be used someday when Fortran support is complete.
* ch-valprint.c (chill_print_type_scalar): Add other enum
TYPE_* and default cases to switch for completeness.
(chill_val_print): Remove unused local var "high_bound" that
is redeclared in a nested scope prior to use.
(chill_var_print): Use "%ld" to print long arg, not "%d".
* regex.c (re_compile_fastmap, re_match_2): Add remaining enum types
and default to switches for completeness.
* minsyms.c (lookup_minimal_symbol_text): Delete unused variable
"trampoline_symbol".
(prim_record_minimal_symbol_and_info): Return NULL rather than trash.
* elfread.c (elf_symtab_read): Don't dereference NULL returns from
record_minimal_symbol_and_info.
* f-lang.c (saved_function_list_end): Ifdef out unused variable
that may be used someday.
* f-valprint.c (f_val_print): Remove unused local variable "straddr".
(coffstab_build_psymtabs): Remove staboff and stabsize parameters.
Add textaddr, textsize, and stabs parameters.
* gdb-stabs.h (struct dbx_symfile_info): Remove text_sect field.
Add text_addr and text_size fields.
(DBX_TEXT_SECT): Don't define.
(DBX_TEXT_ADDR, DBX_TEXT_SIZE): Define.
* coffread.c: Include <ctype.h>.
(struct coff_symfile_info): Remove stabsect and stabindexsect
fields. Add textaddr, textsize, and stabsects fields.
(coff_locate_sections): Record the address of the .text section,
and total the sizes of all sections with names beginning with
".text". Don't bother to record a .stab.index section (COFF
doesn't use them). Make a linked list of all sections with names
beginning with ".stab".
(coff_symfile_read): Adjust call to coffstab_build_psymtabs for
new parameters.
* dbxread.c (dbx_symfile_read): Use DBX_TEXT_ADDR and
DBX_TEXT_SIZE, rather than getting both from DBX_TEXT_SECT.
(dbx_symfile_init): Set DBX_TEXT_ADDR and DBX_TEXT_SIZE, not
DBX_TEXT_SECT.
(elfstab_build_psymtabs): Likewise.
(stabsect_build_psymtabs): Likewise.
(symbuf_sections, symbuf_left, symbuf_read): New static variables.
(fill_symbuf): If symbuf_sections is not NULL, read symbols from
multiple sections.
(coffstab_build_psymtabs): Remove staboffset and stabsize
parameters. Add textaddr, textsize, and stabsects parameters.
Set DBX_TEXT_ADDR and DBX_TEXT_SIZE, not DBX_TEXT_SECT. Handle
multiple stabs sections.
* os9kread.c (os9k_symfile_read): Use DBX_TEXT_ADDR and
DBX_TEXT_SIZE, rather than getting both from DBX_TEXT_SECT.
(os9k_symfile_init): Set DBX_TEXT_ADDR and DBX_TEXT_SIZE, not
DBX_TEXT_SECT.
PR 7241.
for OSF/1-3.x procfs support.
* configure.in (alpha-dec-osf): Use them when configuring
for OSF/1-3.x.
* configure: Updated.
* target.c: Include <string.h>.
Jeff Law
Peter Schauer
Kung Hsu
Fred Fish
Steve Chamberlain
Stan Shebs
J.T. Conklin
Brendan Kehoe
Michael Meissner
Ian Lance Taylor