number_of_symbols and i to long. Rename get_symtab_upper_bound to
bfd_get_symtab_upper_bound. Check for errors from
bfd_get_symtab_upper_bound and bfd_canonicalize_symtab.
* nlmread.c (nlm_symtab_read): Same changes.
all uses of get_symtab_upper_bound to bfd_get_symtab_upper_bound.
Also:
* coffgrok.c (symcount): Change to long.
(do_sections_p1): Check for error return from
bfd_get_reloc_upper_bound. Change relcount to long, and check for
error from bfd_canonicalize_reloc.
(coff_grok): Change storage to long. Check for error from
bfd_get_symtab_upper_bound and bfd_canonicalize_symtab.
* nlmconv.c (main): Change symcount, newsymalloc, newsymcount, and
i to long. Check for error from bfd_get_symtab_upper_bound and
bfd_canonicalize_symtab.
(copy_sections): Change reloc_size and reloc_count to long. Check
for error from bfd_get_reloc_upper_bound and
bfd_canonicalize_reloc.
(mangle_relocs, i386_mangle_relocs, alpha_mangle_relocs): Change
reloc_count_ptr argument to long *. Make corresponding changes to
variables loaded from *reloc_count_ptr.
* nm.c (display_rel_file): Change storage and symcount to long.
Check for errors from bfd_get_symtab_upper_bound and
bfd_canonicalize_symtab.
* objcopy.c (filter_symbols): Change symcount, src_count and
dst_count to long.
(copy_object): Change symcount to long. Pass another argument to
fprintf. Check for errors from bfd_get_symtab_upper_bound and
bfd_canonicalize_symtab.
(copy_section): Change relcount to long. Check for errors from
bfd_get_reloc_upper_bound and bfd_canonicalize_reloc.
(mark_symbols_used_in_relocations): Change relcount and i to long.
Check for errors form bfd_get_reloc_upper_bound and
bfd_canonicalize_reloc.
* objdump.c (storage): Remove global variable.
(symcount): Changed to long.
(slurp_symtab): New local variable storage. Check for errors from
bfd_get_symtab_upper_bound and bfd_canonicalize_symtab.
(remove_useless_symbols): Change return value and count to long.
(objdump_print_address): Change min, max, thisplace and i to long.
(disassemble_data): Change i to long.
(dump_symbols): Change count to long.
(dump_relocs): Change relcount to long. Check for errors from
bfd_ret_reloc_upper_bound and bfd_canonicalize_reloc.
(display_info_table): Add casts when passing LONGEST_ARCH for
printf %* argument.
Remove all conditionals and definitions for ptx.
I386_REGNO_TO_SYMMETRY moved to here from symm-tdep.c.
Fix addresses of floating point registers in REGISTER_U_ADDR.
STORE_STRUCT_RETURN now handles cc and gcc conventions.
FRAME_CHAIN, FRAMELESS_FUNCTION_INVOCATION, FRAME_SAVED_PC,
IN_SIGTRAMP, SIGCONTEXT_PC_OFFSET defined to make backtracing through
signal trampoline code work.
* config/i386/xm-symmetry.h: Clean up, it is now only used for Dynix.
Remove all conditionals and definitions for ptx.
Remove KDB definitions.
match_bitstring_literal): Guard tolower calls with isupper,
tolower on old BSD systems blindly subtracts a constant.
* dbxread.c (read_ofile_symtab): Check for __gnu_compiled_* as
well when determining the producer of the object file.
* mdebugread.c (has_opaque_xref): New function to check for
cross reference to an opaque aggregate.
* mdebugread.c (parse_symbol, parse_partial_symbols): Do not
enter typedefs to opaque aggregates into the symbol tables.
* mdebugread.c (parse_external): Remove skip_procedures argument,
it has always been 1. Remove code that handled stProc symbols,
it was never executed and was wrong, as the index of a
stProc symbol points to the local symbol table and not to the
auxiliary symbol info. Update caller.
* mdebugread.c (parse_partial_symbols): Do not enter external
stProc symbols into the partial symbol table, they are already
entered into the minimal symbol table.
* config/i386/tm-symmetry.h: Clean up, it is now only used for Dynix.
Remove all conditionals and definitions for ptx.
I386_REGNO_TO_SYMMETRY moved to here from symm-tdep.c.
Fix addresses of floating point registers in REGISTER_U_ADDR.
STORE_STRUCT_RETURN now handles cc and gcc conventions.
FRAME_CHAIN, FRAMELESS_FUNCTION_INVOCATION, FRAME_SAVED_PC,
IN_SIGTRAMP, SIGCONTEXT_PC_OFFSET defined to make backtracing through
signal trampoline code work.
* config/i386/xm-symmetry.h: Clean up, it is now only used for Dynix.
Remove all conditionals and definitions for ptx.
Remove KDB definitions.
* symm-nat.c (store_inferior_registers): Fetch registers before
storing them to obtain valid floating point control registers.
Store fpu registers.
* symm-nat.c (print_1167_control_word): Dynix 3.1.1 defines
FPA_PCR_CC_C0 and FPA_PCR_CC_C1, avoid duplicate case value.
* symm-nat.c (fetch_inferior_registers, child_xfer_memory):
Fix typos.
* symm-nat.c (child_resume): Update type of `signal' parameter.
* symm-tdep.c (I386_REGNO_TO_SYMMETRY): Moved to tm-symmetry.h.
sequent dynix.
* gdb.t06/signals.exp: Add clear_xfail for sequent dynix.
* gdb.t15/funcargs.exp: Conditionally step again to really
finish from marker_call_with_trampolines. Handle the case where
the first step from within call_with_trampolines already steps
us back to main.
* gdb.t15/gdbme.c: Add comment to closing brace of
call_with_trampolines for funcargs.exp.
variant of a.out.
* configure.in, config.bfd: Use them for Dynix.
* Makefile.in: Add dependencies for i386dynix.o.
* targets.c: Add definition for i386dynix_vec.
than just giving up the first time it happens.
* remote.c: Document sequence numbers.
(remote_store_registers): Change syntax of 'P' request so that it
never looks like a sequence number.
ChangeLog os9kread.c remote-os9k.c
* os9kread.c (record_minmal_symbol): add section_offset to
relocate minimal symbol table.
* os9kread.c (read_minimal_symbols): ditto.
* os9kread.c (os9k_symfile_init): increase size of dbg and stb
file names.
* os9kread.c (read_os9k_psymtab): if there's no dbg file, just
return. Also if file addr is 0 leave it 0, not to relocate.
* remote-os9k.c (_initialize_remote_os9k): add 'set remotexon',
'set remotexoff' and 'set remotelog' commands.
* gdb.t07/watchpoint.exp: Accept both "Watchpoint" and
"Hardware watchpoint" throughout file.
(test_watchpoint_triggered_in_syscall): New test.
(test_complex_watchpoint): New test.
with the same name:
* objcopy.c (setup_section): Make a new output section even if
one already exists with the given name.
(copy_section): Use isection->output_section rather than trying
to look the output section up by its (possibly non-unique) name.
Jim Kingdon
Ian Lance Taylor
Jeff Law
Peter Schauer
Per Bothner
Kung Hsu
Roland Pesch
Jeffrey Osier
Sean Eric Fagan
Ken Raeburn