Add MIPS16e2 ASE support as per the architecture specification[1],
including in particular:
1. A new ELF ASE flag to mark MIPS16e2 binaries.
2. MIPS16e2 instruction assembly support, including a relaxation update
to use LUI rather than an LI/SLL instruction pair for loading the
high part of 32-bit addresses.
3. MIPS16e2 instruction disassembly support, including updated rules for
extended forms of instructions that are now subdecoded and therefore
do not alias to the original MIPS16 ISA revision instructions even
for encodings that are not valid in the MIPS16e2 instruction set.
Add `-mmips16e2' and `-mno-mips16e2' GAS command-line options and their
corresponding `mips16e2' and `no-mips16e2' settings for the `.set' and
`.module' pseudo-ops. Control the availability of the MT ASE subset of
the MIPS16e2 instruction set with a combination of these controls and
the preexisting MT ASE controls.
Parts of this change by Matthew Fortune and Andrew Bennett.
References:
[1] "MIPS32 Architecture for Programmers: MIPS16e2 Application-Specific
Extension Technical Reference Manual", Imagination Technologies
Ltd., Document Number: MD01172, Revision 01.00, April 26, 2016
include/
* elf/mips.h (AFL_ASE_MIPS16E2): New macro.
(AFL_ASE_MASK): Adjust accordingly.
* opcode/mips.h: Document new operand codes defined.
(mips_operand_type): Add OP_REG28 enum value.
(INSN2_SHORT_ONLY): Update description.
(ASE_MIPS16E2, ASE_MIPS16E2_MT): New macros.
bfd/
* elfxx-mips.c (print_mips_ases): Handle MIPS16e2 ASE.
opcodes/
* mips-dis.c (mips_arch_choices): Add ASE_MIPS16E2 and
ASE_MIPS16E2_MT flags to the unnamed MIPS16 entry.
(mips_convert_abiflags_ases): Handle the AFL_ASE_MIPS16E2 flag.
(print_insn_arg) <OP_REG28>: Add handler.
(validate_insn_args) <OP_REG28>: Handle.
(print_mips16_insn_arg): Handle MIPS16 instructions that require
32-bit encoding and 9-bit immediates.
(print_insn_mips16): Handle MIPS16 instructions that require
32-bit encoding and MFC0/MTC0 operand decoding.
* mips16-opc.c (decode_mips16_operand) <'>', '9', 'G', 'N', 'O'>
<'Q', 'T', 'b', 'c', 'd', 'r', 'u'>: Add handlers.
(RD_C0, WR_C0, E2, E2MT): New macros.
(mips16_opcodes): Add entries for MIPS16e2 instructions:
GP-relative "addiu" and its "addu" spelling, "andi", "cache",
"di", "ehb", "ei", "ext", "ins", GP-relative "lb", "lbu", "lh",
"lhu", and "lw" instructions, "ll", "lui", "lwl", "lwr", "mfc0",
"movn", "movtn", "movtz", "movz", "mtc0", "ori", "pause",
"pref", "rdhwr", "sc", GP-relative "sb", "sh" and "sw"
instructions, "swl", "swr", "sync" and its "sync_acquire",
"sync_mb", "sync_release", "sync_rmb" and "sync_wmb" aliases,
"xori", "dmt", "dvpe", "emt" and "evpe". Add split
regular/extended entries for original MIPS16 ISA revision
instructions whose extended forms are subdecoded in the MIPS16e2
ISA revision: "li", "sll" and "srl".
binutils/
* readelf.c (print_mips_ases): Handle MIPS16e2 ASE.
* NEWS: Mention MIPS16e2 ASE support.
gas/
* config/tc-mips.c (RELAX_MIPS16_ENCODE): Add `e2' flag.
(RELAX_MIPS16_E2): New macro.
(RELAX_MIPS16_PIC, RELAX_MIPS16_SYM32, RELAX_MIPS16_NOMACRO)
(RELAX_MIPS16_USER_SMALL, RELAX_MIPS16_USER_EXT)
(RELAX_MIPS16_DSLOT, RELAX_MIPS16_JAL_DSLOT)
(RELAX_MIPS16_EXTENDED, RELAX_MIPS16_MARK_EXTENDED)
(RELAX_MIPS16_CLEAR_EXTENDED, RELAX_MIPS16_ALWAYS_EXTENDED)
(RELAX_MIPS16_MARK_ALWAYS_EXTENDED)
(RELAX_MIPS16_CLEAR_ALWAYS_EXTENDED, RELAX_MIPS16_MACRO)
(RELAX_MIPS16_MARK_MACRO, RELAX_MIPS16_CLEAR_MACRO): Shift bits.
(mips16_immed_extend): New prototype.
(options): Add OPTION_MIPS16E2 and OPTION_NO_MIPS16E2 enum
values.
(md_longopts): Add "mmips16e2" and "mno-mips16e2" options.
(mips_ases): Add "mips16e2" entry.
(mips_set_ase): Handle MIPS16e2 ASE.
(insn_insert_operand): Explicitly handle immediates with MIPS16
instructions that require 32-bit encoding.
(is_opcode_valid_16): Pass enabled ASE bitmask on to
`opcode_is_member'.
(validate_mips_insn): Explicitly handle immediates with MIPS16
instructions that require 32-bit encoding.
(operand_reg_mask) <OP_REG28>: Add handler.
(match_reg28_operand): New function.
(match_operand) <OP_REG28>: Add handler.
(append_insn): Pass ASE_MIPS16E2 setting to RELAX_MIPS16_ENCODE.
(match_mips16_insn): Handle MIPS16 instructions that require
32-bit encoding and `V' and `u' operand codes.
(mips16_ip): Allow any characters except from `.' in opcodes.
(mips16_immed_extend): Handle 9-bit immediates. Do not shuffle
immediates whose width is not one of these listed.
(md_estimate_size_before_relax): Handle MIPS16e2 relaxation.
(mips_relax_frag): Likewise.
(md_convert_frag): Likewise.
(mips_convert_ase_flags): Handle MIPS16e2 ASE.
* doc/as.texinfo (Target MIPS options): Add `-mmips16e2' and
`-mno-mips16e2' options.
(-mmips16e2, -mno-mips16e2): New options.
* doc/c-mips.texi (MIPS Options): Add `-mmips16e2' and
`-mno-mips16e2' options.
(MIPS ASE Instruction Generation Overrides): Add `.set mips16e2'
and `.set nomips16e2'.
* readelf.c (process_section_headers): Warn about overlarge
sections.
(print_gnu_build_attribute_name): Print the number of unrecognised
note types. Fix formatting in the presence of errors.
(testsuite/binutils-all/note-2-32.s): Fix encoding of numeric notes.
(testsuite/binutils-all/note-2-64.s): Likewise.
A static, non-relocated global offset table will be embedded in static
binaries produced from objects containing any kind of GOT relocations,
generally PIC code. All symbols will have been resolved in static link
in such binaries making all GOT entries local and their values final as
there is no run-time load processing further performed.
Dump such GOT with `readelf -A' like already done with regular GOT, to
make it easier to examine static code that uses accesses via the GOT
pointer. There will be no dynamic segment or section in a static binary
to get the GOT pointer (DT_PLTGOT) from, so use section headers to find
a `.got' section instead.
binutils/
* readelf.c (process_mips_specific): Add static GOT support.
Unavailable data is handled gracefully in MIPS GOT processing done by
`print_mips_got_entry', so all that is needed in special GOT[1] handling
is to verify whether data can be retrieved for the purpose of the GNU
marker check done with `byte_get'. Remove the extra error reporting
code then, introduced with commit 75ec1fdbb7 ("Fix runtime seg-fault
in readelf when parsing a corrupt MIPS binary.") in the course of
addressing PR binutils/21344, and defer the error case to regular local
GOT entry processing.
binutils/
* readelf.c (process_mips_specific): Remove error reporting from
GOT[1] processing.
Null data is handled gracefully throughout in MIPS GOT processing, with
addresses printed normally and unavailable data shown as `<unknown>' by
`print_mips_got_entry', and special processing code for GOT[1] doing an
explicit check. Remove an unwanted null GOT data check then, introduced
with commit 592458412f in the course of addressing PR binutils/12855.
binutils/
* readelf.c (process_mips_specific): Remove null GOT data check.
PR binutils/21379
* readelf.c (process_dynamic_section): Detect over large section
offsets in the DT_SYMTAB entry.
PR binutils/21345
* readelf.c (process_mips_specific): Catch an unfeasible memory
allocation before it happens and print a suitable error message.
* objcopy.c: Add --no-merge-notes option to disable note merging.
Add --[no-]merge-notes option to strip, and enable it by default.
(num_bytes): New function.
(merge_gnu_build_notes): Add code to merge stack size notes.
* binutils.texi: Update strip and objcopy documentation.
* readelf.c (print_gnu_build_attribute_name): Use defined
constants for note types.
Mark an ALLOC section, which should be placed in special memory area,
with SHF_GNU_MBIND. Its sh_info field indicates the special memory
type. GNU_MBIND section names start with ".mbind" so that they are
placed as orphan sections by linker. All input GNU_MBIND sections
with the same sh_type, sh_flags and sh_info are placed in one output
GNU_MBIND section. In executable and shared object, create a
GNU_MBIND segment for each GNU_MBIND section and its segment type is
PT_GNU_MBIND_LO plus the sh_info value. Each GNU_MBIND segment is
aligned at page boundary.
The assembler syntax:
.section .mbind.foo,"adx",%progbits
^ 0: Special memory type.
|
'd' for SHF_GNU_MBIND.
.section .mbind.foo,"adx",%progbits,0x1
^ 1: Special memory type.
|
'd' for SHF_GNU_MBIND.
.section .mbind.bar,"adG",%progbits,.foo_group,comdat,0x2
^ 2: Special memory type.
|
'd' for SHF_GNU_MBIND.
bfd/
* elf.c (get_program_header_size): Add a GNU_MBIND segment for
each GNU_MBIND section and align GNU_MBIND section to page size.
(_bfd_elf_map_sections_to_segments): Create a GNU_MBIND
segment for each GNU_MBIND section.
(_bfd_elf_init_private_section_data): Copy sh_info from input
for GNU_MBIND section.
binutils/
* NEWS: Mention support for ELF SHF_GNU_MBIND and
PT_GNU_MBIND_XXX.
* readelf.c (get_segment_type): Handle PT_GNU_MBIND_XXX.
(get_elf_section_flags): Handle SHF_GNU_MBIND.
(process_section_headers): Likewise.
* testsuite/binutils-all/mbind1.s: New file.
* testsuite/binutils-all/objcopy.exp: Run readelf test on
mbind1.s.
gas/
* NEWS: Mention support for ELF SHF_GNU_MBIND.
* config/obj-elf.c (section_match): New.
(get_section): Match both sh_info and group name.
(obj_elf_change_section): Add argument for sh_info. Pass both
sh_info and group name to get_section. Issue an error for
SHF_GNU_MBIND section without SHF_ALLOC. Set sh_info.
(obj_elf_parse_section_letters): Set SHF_GNU_MBIND for 'd'.
(obj_elf_section): Support SHF_GNU_MBIND section info.
* config/obj-elf.h (obj_elf_change_section): Add argument for
sh_info.
* config/tc-arm.c (start_unwind_section): Pass 0 as sh_info to
obj_elf_change_section.
* config/tc-ia64.c (obj_elf_vms_common): Likewise.
* config/tc-microblaze.c (microblaze_s_data): Likewise.
(microblaze_s_sdata): Likewise.
(microblaze_s_rdata): Likewise.
(microblaze_s_bss): Likewise.
* config/tc-mips.c (s_change_section): Likewise.
* config/tc-msp430.c (msp430_profiler): Likewise.
* config/tc-rx.c (parse_rx_section): Likewise.
* config/tc-tic6x.c (tic6x_start_unwind_section): Likewise.
* doc/as.texinfo: Document 'd' for SHF_GNU_MBIND.
* testsuite/gas/elf/elf.exp: Run section12a, section12b and
section13.
* testsuite/gas/elf/section10.d: Updated.
* testsuite/gas/elf/section10.s: Likewise.
* testsuite/gas/elf/section12.s: New file.
* testsuite/gas/elf/section12a.d: Likewise.
* testsuite/gas/elf/section12b.d: Likewise.
* testsuite/gas/elf/section13.l: Likewise.
* testsuite/gas/elf/section13.d: Likewise.
* testsuite/gas/elf/section13.s: Likewise.
include/
* elf/common.h (PT_GNU_MBIND_NUM): New.
(PT_GNU_MBIND_LO): Likewise.
(PT_GNU_MBIND_HI): Likewise.
(SHF_GNU_MBIND): Likewise.
ld/
* NEWS: Mention support for ELF SHF_GNU_MBIND and
PT_GNU_MBIND_XXX.
* emultempl/elf32.em (gld${EMULATION_NAME}_place_orphan): Place
input GNU_MBIND sections with the same type, attributes and
sh_info field into a single output GNU_MBIND section.
* testsuite/ld-elf/elf.exp: Run mbind2a and mbind2b.
* testsuite/ld-elf/mbind1.s: New file.
* testsuite/ld-elf/mbind1a.d: Likewise.
* testsuite/ld-elf/mbind1b.d: Likewise.
* testsuite/ld-elf/mbind1c.d: Likewise.
* testsuite/ld-elf/mbind2a.s: Likewise.
* testsuite/ld-elf/mbind2b.c: Likewise.
* readelf.c (print_gnu_build_attribute_name): Allow stack
protection notes to contain numeric values. Use a colon rather
than a space to separate a string name from its values. Decode
the numeric value of a stack protection note.
* objcopy.c (merge_gnu_build_notes): Allow version notes to
contain extra text after the protocol version number.
The fix for PR binutils/17512 added a check for the dynamic segment being
inside the actual ELF file. If not an error message would be produced:
readelf: Error: the dynamic segment offset + size exceeds the size of the file
Unfortunately for separate debuginfo files it is common for the dynamic
segment not being inside the file because the .dynamic section is NOBITS.
Since the check is done unconditionally in process_program_headers and
process_program_headers is always called (to setup dynamic_addr in case
it is needed). The error is produced on any operations done on any .debug
file (even if no program headers or the dynamic segment is used).
If there are section headers then a cross check is done to see if the
.dynamic section is NOBITS in which case dynamic_addr is set to zero
without a warning or error (which is then checked first before any
operation on the dynamic segement is done).
Move the check for the dynamic segment being inside the actual ELF file
after the cross check with the section headers to suppress the error for
.debug files.
binutils/ChangeLog:
* readelf.c (process_program_headers): Move dynamic_addr check
after .dynamic section cross check.
include * elf/common.h (GNU_BUILD_ATTRIBUTE_SHORT_ENUM): New GNU BUILD
note type.
binutils * readelf.c (print_gnu_build_attribute_name): Add support for
GNU_BUILD_ATTRIBUTE_SHORT_ENUM.
* readelf.c (print_gnu_build_attribute_description): Move symbol
printing code to...
(print_symbol_for_build_attribute): New function. ...here.
Add to find the best symbol to associate with an OPEN note.
Add code to cache the symbol table and string table, so that they
are not loaded every time a note is displayed.
* testsuite/binutils-all/note-2-32.s: Add a function symbol.
* testsuite/binutils-all/note-2-64.s: Likewise.
* testsuite/binutils-all/note-2-32.d: Update expected note output.
* testsuite/binutils-all/note-2-64.d: Likewise.
Property type and datasz are always 4 bytes for both 32-bit and 64-bit
objects. Property values for GNU_PROPERTY_X86_ISA_1_USED and
GNU_PROPERTY_X86_ISA_1_NEEDED are 4 bytes for both i386 and x86-64
objects. We should also check GNU_PROPERTY_LOPROC and
GNU_PROPERTY_LOUSER.
binutils/
PR binutils/21231
* readelf.c (decode_x86_isa): Change argument to unsigned int.
(print_gnu_property_note): Retrieve property type and datasz as
4-byte integer. Consolidate property datasz check. Check
GNU_PROPERTY_LOPROC and GNU_PROPERTY_LOUSER.
* testsuite/binutils-all/i386/pr21231a.d: New file.
* testsuite/binutils-all/i386/pr21231a.s: Likewise.
* testsuite/binutils-all/i386/pr21231b.d: Likewise.
* testsuite/binutils-all/i386/pr21231b.s: Likewise.
* testsuite/binutils-all/x86-64/pr21231a.d: Likewise.
* testsuite/binutils-all/x86-64/pr21231a.s: Likewise.
* testsuite/binutils-all/x86-64/pr21231b.d: Likewise.
* testsuite/binutils-all/x86-64/pr21231b.s: Likewise.
include/
PR binutils/21231
* elf/common.h (GNU_PROPERTY_LOPROC): New.
(GNU_PROPERTY_HIPROC): Likewise.
(GNU_PROPERTY_LOUSER): Likewise.
(GNU_PROPERTY_HIUSER): Likewise.
* readelf.c (print_gnu_build_attribute_name): Read byte values
from the name string as unsigned bytes.
(process_notes_at): Use memcpy to copy an unterminated name
string.
(process_program_headers): Fix snafu - if the program headers are
not available then this is not a cause to fail.
(process_corefile_note_segments): Likewise.
Remove a trailing space or a leading pipe character from version flags
printed with `readelf --version-info'.
For example with the `mips-linux' target we get:
$ cat ver_def.s
.data
.globl new_foo
.type new_foo, %object
new_foo:
.symver new_foo, foo@@ver_foo
$ cat ver_def.ver
{ global: *foo*; local: *; };
$ as -o ver_def.o ver_def.s
$ ld -e 0 --export-dynamic --version-script=ver_def.ver -o ver_def ver_def.o
$ readelf -V ver_def
Version symbols section '.gnu.version' contains 4 entries:
Addr: 000000000000007e Offset: 0x01007e Link: 2 (.dynsym)
000: 0 (*local*) 2 (ver_foo) 1 (*global*) 2 (ver_foo)
Version definition section '.gnu.version_d' contains 2 entries:
Addr: 0x0000000000000088 Offset: 0x010088 Link: 3 (.dynstr)
000000: Rev: 1 Flags: BASE Index: 1 Cnt: 1 Name: ver_def
0x001c: Rev: 1 Flags: none Index: 2 Cnt: 1 Name: ver_foo
$
which includes an unnecessary space after `BASE'; both call sites
already provide suitable separation from output that follows. Also if
only unknown flags were present, then lone `| <unknown>' would be
printed.
binutils/
* readelf.c (get_ver_flags): Tidy the formatting of the string
returned
Make `isum' unsigned like data it is calculated from.
binutils/
* readelf.c (process_version_sections) <SHT_GNU_verdef>: Make
`isum' unsigned.
<SHT_GNU_verneed>: Likewise.
Fix a commit 74e1a04b97 ("More fixes for reading corrupt ELF files.")
`readelf --version-info' regression that caused "Version definition past
end of section" to be always printed at the end, even with good section
data.
For example with the `mips-linux' target we get:
$ cat ver_def.s
.data
.globl new_foo
.type new_foo, %object
new_foo:
.symver new_foo, foo@@ver_foo
$ cat ver_def.ver
{ global: *foo*; local: *; };
$ as -o ver_def.o ver_def.s
$ ld -e 0 --export-dynamic --version-script=ver_def.ver -o ver_def ver_def.o
$ readelf -V ver_def
Version symbols section '.gnu.version' contains 4 entries:
Addr: 000000000000007e Offset: 0x01007e Link: 2 (.dynsym)
000: 0 (*local*) 2 (ver_foo) 1 (*global*) 2 (ver_foo)
Version definition section '.gnu.version_d' contains 2 entries:
Addr: 0x0000000000000088 Offset: 0x010088 Link: 3 (.dynstr)
000000: Rev: 1 Flags: BASE Index: 1 Cnt: 1 Name: ver_def
0x001c: Rev: 1 Flags: none Index: 2 Cnt: 1 Name: ver_foo
Version definition past end of section
$
The cause is the `if (idx + ent.vd_next <= idx)' condition introduced to
ensure forward progress, which however always triggers for good version
definition section data as the last entry will have its `vd_next' value
set to 0.
Adjust the condition then, to say `if (idx + ent.vd_next < idx)' instead
and to ensure forward progress limit the number of entries processed to
the size of the version definition section, removing the problematic
message from output quoted above, while ensuring the original PR 17531
test case is still handled gracefully.
Add a suitable test case so that we have `readelf --version-info'
coverage; due to the lack of infrastructure needed to run the linker in
the `binutils' test suite and limited justification to implement it add
a new `readelf.exp' script to the `ld' test suite instead, intended to
gather any `readelf' test cases that require the linker to be run. If
ever we decide to have linker infrastructure added to the `binutils'
test suite, then the script can be moved between the test suites.
binutils/
* readelf.c (process_version_sections) <SHT_GNU_verdef>: Limit
the number of entries processed by the section size. Don't
break out of the loop if `ent.vd_next' is 0.
ld/
* testsuite/ld-elf/ver_def.d: New test.
* testsuite/ld-elf/ver_def.ld: New test linker script.
* testsuite/ld-elf/ver_def.ver: New test version script.
* testsuite/ld-elf/ver_def.s: New test source.
* testsuite/ld-elf/readelf.exp: New test script.
binutils/
2017-02-23 Jan Kratochvil <jan.kratochvil@redhat.com>
* dwarf.c (fetch_indirect_line_string): New function.
(abbrev_attr): New field implicit_const.
(add_abbrev_attr): New parameter implicit_const.
(process_abbrev_section): Support DW_FORM_implicit_const.
(decode_location_expression): Support DW_OP_entry_value.
(read_and_display_attr_value): Add parameter implicit_const. Support
DW_FORM_line_strp and DW_FORM_implicit_const.
(read_and_display_attr): Add parameter implicit_const.
(process_debug_info): Support line_str and DWARF-5.
(read_debug_line_header): Support DWARF-5.
(display_formatted_table): New function.
(display_debug_lines_raw): New parameter file. Support DWARF-5.
(display_debug_lines_decoded): New parameter fileptr. Support DWARF-5.
(display_debug_lines): Pass file parameter.
(display_debug_macro): Update read_and_display_attr_value caller.
(display_debug_abbrev): Support DW_FORM_implicit_const.
(display_loclists_list): New function.
(display_loc_list): Support .debug_loclists.
(display_debug_ranges_list): New function from display_debug_ranges.
(display_debug_rnglists_list): New function.
(display_debug_ranges): Support .debug_rnglists.
(debug_displays): Add .debug_line_str, .debug_loclists and
.debug_rnglists.
* dwarf.h: Include dwarf2.h
(DWARF2_Internal_LineInfo): Add li_offset_size.
(DWARF2_Internal_CompUnit): Add cu_unit_type.
(enum dwarf_section_display_enum): Add line_str.
* readelf.c (process_section_headers): Add rnglists and loclists.
* readelf.c (display_tag_value): Use an explicit signed type for
the tag parameter.
(display_gnu_attributes): Use an unsigned integer type for
attribute tags.
(display_power_gnu_attribute): Likewise.
(display_s390_gnu_attribute): Likewise.
(display_sparc_hwcaps): Likewise.
(display_sparc_hwcaps2): Likewise.
(display_sparc_gnu_attribute): Likewise.
(display_mips_gnu_attribute): Likewise.
(display_tic6x_attribute): Likewise.
(display_raw_attribute): Likewise.
(process_attributes): Likewise.
(process_arm_specific): Delete redundant function.
(process_power_specific): Likewise.
(process_s390_specific): Likewise.
(process_sparc_specific): Likewise.
(process_tic6x_specific): Likewise.
(process_msp430x_specific): Likewise.
(display_public_gnu_attributes): New function. Displays known
information about an unknown gnu attribute.
(display_generic_attribute): New function. Calls
display_tag_value for non-nul tags.
(process_arch_specific): Call process_attributes even for
architectures not known to specifically support gnu attributes.
Fix a commit 74e1a04b97 ("More fixes for reading corrupt ELF files.")
`readelf --version-info' output formatting regression where a dropped
new line caused section header information from the `.gnu.version_d'
version definition section to be printed on the same line as this
section's first entry.
For example with the `mips-linux' target we get:
$ cat ver_def.s
.data
.globl new_foo
.type new_foo, %object
new_foo:
.symver new_foo, foo@@ver_foo
$ cat ver_def.ver
{ global: *foo*; local: *; };
$ as -o ver_def.o ver_def.s
$ ld -e 0 --export-dynamic --version-script=ver_def.ver -o ver_def ver_def.o
$ readelf -V ver_def
Version symbols section '.gnu.version' contains 4 entries:
Addr: 000000000000007e Offset: 0x01007e Link: 2 (.dynsym)
000: 0 (*local*) 2 (ver_foo) 1 (*global*) 2 (ver_foo)
Version definition section '.gnu.version_d' contains 2 entries:
Addr: 0x0000000000000088 Offset: 0x010088 Link: 3 (.dynstr) 000000: Rev: 1 Flags: BASE Index: 1 Cnt: 1 Name: ver_def
0x001c: Rev: 1 Flags: none Index: 2 Cnt: 1 Name: ver_foo
Version definition past end of section
$
Add the new line then, to get:
$ readelf -V ver_def
Version symbols section '.gnu.version' contains 4 entries:
Addr: 000000000000007e Offset: 0x01007e Link: 2 (.dynsym)
000: 0 (*local*) 2 (ver_foo) 1 (*global*) 2 (ver_foo)
Version definition section '.gnu.version_d' contains 2 entries:
Addr: 0x0000000000000088 Offset: 0x010088 Link: 3 (.dynstr)
000000: Rev: 1 Flags: BASE Index: 1 Cnt: 1 Name: ver_def
0x001c: Rev: 1 Flags: none Index: 2 Cnt: 1 Name: ver_foo
Version definition past end of section
$
instead.
binutils/
* readelf.c (process_version_sections) <SHT_GNU_verdef>: Print a
new line between the heading and the first version definition
entry.
PR binutils/21155
* readelf.c (IN_RANGE): New macro. Tests for an address + offset
being within a given range.
(target_specific_reloc_handling): Use macro to test for underflow
as well as overflow of reloc offset.
PR binutils/21139
* readelf.c (target_specific_reloc_handling): Add num_syms
parameter. Check for symbol table overflow before accessing
symbol value. If reloc pointer is NULL, discard all saved state.
(apply_relocations): Pass num_syms to target_specific_reloc_handling.
Call target_specific_reloc_handling with a NULL reloc pointer
after processing all of the relocs.
PR binutils/21137
* readelf.c (target_specific_reloc_handling): Add end parameter.
Check for buffer overflow before writing relocated values.
(apply_relocations): Pass end to target_specific_reloc_handling.
We've decided to standardize on two flags for RISC-V: "-march" sets the
target architecture (which determines which instructions can be
generated), and "-mabi" sets the target ABI. We needed to rework this
because the old flag set didn't support soft-float or single-float ABIs,
and didn't support an x32-style ABI on RISC-V.
Additionally, we've changed the behavior of the -march flag: it's now a
lot stricter and only parses things we can actually understand.
Additionally, it's now lowercase-only: the rationale is that while the
RISC-V ISA manual specifies that ISA strings are case-insensitive, in
Linux-land things are usually case-sensitive. Since this flag can be
used to determine library paths, we didn't want to bake some
case-insensitivity in there that would case trouble later.
This patch implements these two new flags and removes the old flags that
could conflict with these. There wasn't a RISC-V release before, so we
want to just support a clean flag set.
include/
* elf/riscv.h (EF_RISCV_SOFT_FLOAT): Don't define.
(EF_RISCV_FLOAT_ABI, EF_RISCV_FLOAT_ABI_SOFT): Define.
(EF_RISCV_FLOAT_ABI_SINGLE, EF_RISCV_FLOAT_ABI_DOUBLE): Define.
(EF_RISCV_FLOAT_ABI_QUAD): Define.
bfd/
* elfnn-riscv.c (_bfd_riscv_elf_merge_private_bfd_data): Use
EF_RISCV_FLOAT_ABI_SOFT instead of EF_RISCV_SOFT_FLOAT.
binutils/
* readelf.c (get_machine_flags): Use
EF_RISCV_FLOAT_ABI_{SOFT,SINGLE,DOBULE,QUAD) instead of
EF_RISCV_{SOFT,HARD}_FLOAT.
gas/
* config/tc-riscv.h (xlen): Delete.
* config/tc-riscv.c (xlen): Make static.
(abi_xlen): New variable.
(options): Replace OPTION_{M32,M64,MSOFT_FLOAT,MHARD_FLOAT,MRVC}
with OPTION_MABI.
(md_longopts): Likewise.
(md_parse_option): Likewise.
(riscv_elf_final_processing): Likewise.
* doc/as.texinfo (Target RISC-V options): Likewise.
* doc/c-riscv.texi (OPTIONS): Likewise.
* config/tc-riscv.c (float_mode): Removed.
(float_abi): New type, specifies the floating-point ABI.
(riscv_set_abi): New function.
(riscv_add_subset): Only allow lower-case ISA names and require
them to start with "rv".
(riscv_after_parse_args): Likewise.
opcodes/
* riscv-dis.c (riscv_disassemble_insn): Default to the ELF's
XLEN when none is provided.