Prevent a race when building ada-lex.c, and any target of rules .c:.l or
.c:.y. The target should be written only at the last step, else SIGINT
(^C) can leave an inconsistent state. Being .PRECIOUS makes it even
worse.
gdb/ChangeLog:
PR build/22873
* gdb/Makefile.in: (.c:.l, .c:.y): Write the target only in the
last step, and do it atomically.
Since bfd dropped support for SH-5, there's no point in keeping it in
GDB either.
This restores --enable-targets=all builds.
gdb/ChangeLog:
2018-04-16 Pedro Alves <palves@redhat.com>
* MAINTAINERS (sh): Remove.
* Makefile.in (ALL_TARGET_OBS): Remove sh64-tdep.o.
(HFILES_NO_SRCDIR): Remove sh64-tdep.h.
(ALLDEPFILES): Remove sh64-tdep.c.
* NEWS: Mentions that support for SH-5/SH64 is removed.
* configure.tgt (sh*-*-linux*): Remove reference to sh64-tdep.o.
(sh*-*-openbsd*): Ditto.
(sh64-*-elf*): Remove.
(sh*): Remove.
* regcache.c (cooked_write_test): Remove bfd_mach_sh5 case.
* sh-linux-tdep.c: Remove reference to bfd_mach_sh5.
* sh-tdep.c: No longer include "sh64-tdep.h".
(sh_gdbarch_init): Remove reference to bfd_mach_sh5.
* sh64-tdep.c, sh64-tdep.h: Remove files.
Support for m88k was fully removed from bfd, which broke gdb
--enable-targets=all builds:
> gdb/m88k-tdep.c: In function void _initialize_m88k_tdep():
> gdb/m88k-tdep.c:867:21: error: bfd_arch_m88k was not declared in this scope
> gdbarch_register (bfd_arch_m88k, m88k_gdbarch_init, NULL);
There's no point in keeping GDB support for OpenBSD/m88k with no bfd
support, so this commit simply removes the port.
gdb/ChangeLog:
2018-04-16 Pedro Alves <palves@redhat.com>
* MAINTAINERS: Remove m88k.
* Makefile.in (ALL_TARGET_OBS): Remove m88k-tdep.o.
(HFILES_NO_SRCDIR): Remove m88k-tdep.h.
(ALLDEPFILES): Remove m88k-bsd-nat.c and m88k-tdep.c.
* NEWS: Mention that support for OpenBSD/m88k was removed.
* configure.host (m88*-*-*): Remove support.
* configure.nat (m88k-*-*): Remove support.
* configure.tgt (m88*-*-openbsd*): Remove.
* m88k-bsd-nat.c, m88k-tdep.c, m88k-tdep.h: Delete.
With version 7.3 GCC supports new options
-mindirect-branch=<choice>
-mfunction-return=<choice>
The choices are:
keep behaves as before
thunk jumps through a thunk
thunk-external jumps through an external thunk
thunk-inline jumps through an inlined thunk
For thunk and thunk-external, GDB would, on a call to the thunk, step into
the thunk and then resume to its caller assuming that this is an
undebuggable function. On a return thunk, GDB would stop inside the
thunk.
Make GDB step through such thunks instead.
Before:
Temporary breakpoint 1, main ()
at gdb.base/step-indirect-call-thunk.c:37
37 x = apply (inc, 41);
(gdb) s
apply (op=0x80483e6 <inc>, x=41)
at gdb.base/step-indirect-call-thunk.c:29
29 return op (x);
(gdb)
30 }
After:
Temporary breakpoint 1, main ()
at gdb.base/step-indirect-call-thunk.c:37
37 x = apply (inc, 41);
(gdb) s
apply (op=0x80483e6 <inc>, x=41)
at gdb.base/step-indirect-call-thunk.c:29
29 return op (x);
(gdb)
inc (x=41) at gdb.base/step-indirect-call-thunk.c:23
23 return x + 1;
This is independent of the step-mode. In order to step into the thunk,
you would need to use stepi.
When stepping over an indirect call thunk, GDB would first step through
the thunk, then recognize that it stepped into a sub-routine and resume to
the caller (of the thunk). Not sure whether this is worth optimizing.
Thunk detection is implemented via gdbarch. I implemented the methods for
IA. Other architectures may run into unexpected fails.
The tests assume a fixed number of instruction steps to reach a thunk.
This depends on the compiler as well as the architecture. They may need
adjustments when we add support for more architectures. Or we can simply
drop those tests that cover being able to step into thunks using
instruction stepping.
When using an older GCC, the tests will fail to build and will be reported
as untested:
Running .../gdb.base/step-indirect-call-thunk.exp ...
gdb compile failed, \
gcc: error: unrecognized command line option '-mindirect-branch=thunk'
gcc: error: unrecognized command line option '-mfunction-return=thunk'
=== gdb Summary ===
# of untested testcases 1
gdb/
* infrun.c (process_event_stop_test): Call
gdbarch_in_indirect_branch_thunk.
* gdbarch.sh (in_indirect_branch_thunk): New.
* gdbarch.c: Regenerated.
* gdbarch.h: Regenerated.
* x86-tdep.h: New.
* x86-tdep.c: New.
* Makefile.in (ALL_TARGET_OBS): Add x86-tdep.o.
(HFILES_NO_SRCDIR): Add x86-tdep.h.
(ALLDEPFILES): Add x86-tdep.c.
* arch-utils.h (default_in_indirect_branch_thunk): New.
* arch-utils.c (default_in_indirect_branch_thunk): New.
* i386-tdep: Include x86-tdep.h.
(i386_in_indirect_branch_thunk): New.
(i386_elf_init_abi): Set in_indirect_branch_thunk gdbarch
function.
* amd64-tdep: Include x86-tdep.h.
(amd64_in_indirect_branch_thunk): New.
(amd64_init_abi): Set in_indirect_branch_thunk gdbarch function.
testsuite/
* gdb.base/step-indirect-call-thunk.exp: New.
* gdb.base/step-indirect-call-thunk.c: New.
* gdb.reverse/step-indirect-call-thunk.exp: New.
* gdb.reverse/step-indirect-call-thunk.c: New.
The previous patch copied the string_view tests from libstdc++. This
patch adjusts them in a similar way that the libstdc++ optional tests
are integrated in our unit test suite.
Not all tests are used, some of them require language features not
present in c++11. For example, we can't use a string_view constructor
where the length is not explicit in a constexpr, because
std::char_traits::length is not a constexpr itself (it is in c++17
though). Nevertheless, a good number of tests are integrated, which
covers pretty well the string_view features.
gdb/ChangeLog:
* Makefile.in (SUBDIR_UNITTESTS_SRCS): Add
string_view-selftests.c.
* unittests/basic_string_view/capacity/1.cc: Adapt to GDB
testsuite.
* unittests/basic_string_view/cons/char/1.cc: Likewise.
* unittests/basic_string_view/cons/char/2.cc: Likewise.
* unittests/basic_string_view/cons/char/3.cc: Likewise.
* unittests/basic_string_view/element_access/char/1.cc:
Likewise.
* unittests/basic_string_view/element_access/char/empty.cc:
Likewise.
* unittests/basic_string_view/element_access/char/front_back.cc:
Likewise.
* unittests/basic_string_view/inserters/char/2.cc: Likewise.
* unittests/basic_string_view/modifiers/remove_prefix/char/1.cc:
Likewise.
* unittests/basic_string_view/modifiers/remove_suffix/char/1.cc:
Likewise.
* unittests/basic_string_view/modifiers/swap/char/1.cc:
Likewise.
* unittests/basic_string_view/operations/compare/char/1.cc:
Likewise.
* unittests/basic_string_view/operations/compare/char/13650.cc:
Likewise.
* unittests/basic_string_view/operations/copy/char/1.cc:
Likewise.
* unittests/basic_string_view/operations/data/char/1.cc:
Likewise.
* unittests/basic_string_view/operations/find/char/1.cc:
Likewise.
* unittests/basic_string_view/operations/find/char/2.cc:
Likewise.
* unittests/basic_string_view/operations/find/char/3.cc:
Likewise.
* unittests/basic_string_view/operations/find/char/4.cc:
Likewise.
* unittests/basic_string_view/operations/rfind/char/1.cc:
Likewise.
* unittests/basic_string_view/operations/rfind/char/2.cc:
Likewise.
* unittests/basic_string_view/operations/rfind/char/3.cc:
Likewise.
* unittests/basic_string_view/operations/substr/char/1.cc:
Likewise.
* unittests/basic_string_view/operators/char/2.cc: Likewise.
* unittests/string_view-selftests.c: New file.
I want to add a DWARF index-related feature (automatically produce index
files when loading objfiles in GDB), but I don't want to add many
hundred lines to the already too big dwarf2read.c. I thought it would
be a logical split to move everything related to the DWARF index to its
own file.
I first tried to move everything that reads and writes DWARF indices to
a separate file, but found that the "read" part is a little bit
entangled with the rest of dwarf2read.c, so the line is hard to draw
about where to split. The write part is quite isolated though, so I
moved this part to a new file, dwarf-index-write.c. Some things are
necessary to both reading and writing indices, so I placed them in
dwarf-index-common.{c,h}. The idea would be to have a
dwarf-index-read.c eventually that would use it too (for now that code
is still in dwarf2read.c).
This required moving some things to a new dwarf2read.h header, so they
can be read by the code that writes the index.
The patch is big in number of lines, but it's all existing code being
moved around. The only changes are that some functions are not static
anymore, a declaration is added in a .h file, and therefore the comment
is moved there.
I built-tested it with a little and big endian target.
This patch is also available on the users/simark/split-dwarf2read
branch.
gdb/ChangeLog:
* Makefile.in (COMMON_SFILES): Add dwarf-index-common.c and
dwarf-index-write.c
(HFILES_NO_SRCDIR): Add dwarf-index-common.h and dwarf2read.h.
* dwarf-index-common.c: New file.
* dwarf-index-common.h: New file.
* dwarf-index-write.c: New file.
* dwarf2read.c: Include dwarf2read.h and dwarf-index-common.h.
(struct dwarf2_section_info): Move from here.
(dwarf2_section_info_def): Likewise.
(DEF_VEC_O (dwarf2_section_info_def)): Likewise.
(offset_type): Likewise.
(DW2_GDB_INDEX_SYMBOL_STATIC_SET_VALUE): Likewise.
(DW2_GDB_INDEX_SYMBOL_KIND_SET_VALUE): Likewise.
(DW2_GDB_INDEX_CU_SET_VALUE): Likewise.
(byte_swap): Likewise.
(MAYBE_SWAP): Likewise.
(dwarf2_per_cu_ptr): Likewise.
(DEF_VEC_P (dwarf2_per_cu_ptr)): Likewise.
(struct tu_stats): Likewise.
(struct dwarf2_per_objfile): Likewise.
(struct dwarf2_per_cu_data): Likewise.
(struct signatured_type): Likewise.
(sig_type_ptr): Likewise.
(DEF_VEC_P (sig_type_ptr)): Likewise.
(INDEX4_SUFFIX): Likewise.
(INDEX5_SUFFIX): Likewise.
(DEBUG_STR_SUFFIX): Likewise.
(dwarf2_read_section): Make non-static.
(mapped_index_string_hash): Move from here.
(dwarf5_djb_hash): Likewise.
(file_write): Likewise.
(class data_buf): Likewise.
(struct symtab_index_entry): Likewise.
(struct mapped_symtab): Likewise.
(find_slot): Likewise.
(hash_expand): Likewise.
(add_index_entry): Likewise.
(uniquify_cu_indices): Likewise.
(class c_str_view): Likewise.
(class c_str_view_hasher): Likewise.
(class vector_hasher): Likewise.
(write_hash_table): Likewise.
(psym_index_map): Likewise.
(struct addrmap_index_data): Likewise.
(add_address_entry): Likewise.
(add_address_entry_worker): Likewise.
(write_address_map): Likewise.
(symbol_kind): Likewise.
(write_psymbols): Likewise.
(struct signatured_type_index_data): Likewise.
(write_one_signatured_type): Likewise.
(recursively_count_psymbols): Likewise.
(recursively_write_psymbols): Likewise.
(class debug_names): Likewise.
(check_dwarf64_offsets): Likewise.
(psyms_seen_size): Likewise.
(write_gdbindex): Likewise.
(write_debug_names): Likewise.
(assert_file_size): Likewise.
(write_psymtabs_to_index): Likewise.
(save_gdb_index_command): Likewise.
(_initialize_dwarf2_read): Don't register the "save gdb-index"
command.
* dwarf2read.h: New file.
Since I modify the parse_static_tracepoint_marker_definition function in
the next patch, I wanted to write a unit test for it. Doing so showed
that it doesn't handle multiple consecutive static tracepoint
definitions separated by commas. However, the RSP documentation [1]
states that servers may return multiple definitions, like:
1234:6d61726b657231:6578747261207374756666,abba:6d61726b657232:
The problem is that the function uses strlen to compute the length of
the last field (the extra field). If there are additional definitions
in addition to the one we are currently parsing, the returned length
will include those definitions, and we'll try to hex-decode past the
extra field.
This patch changes parse_static_tracepoint_marker_definition to consider
the case where the current definition is followed by a comma and more
definitions. It also adds the unit test that found the issue in the
first place.
I don't think this causes any backwards compatibility issues, because
the previous code only handled single static tracepoint definitions, and
the new code handles that correctly.
gdb/ChangeLog:
* tracepoint.c (parse_static_tracepoint_marker_definition):
Consider case where the definition is followed by more
definitions.
* Makefile.in (SUBDIR_UNITTESTS_SRCS): Add
tracepoint-selftests.c.
* unittests/tracepoint-selftests.c: New.
[1] https://sourceware.org/gdb/onlinedocs/gdb/Tracepoint-Packets.html#qTfSTM
This converts observers from using a special source-generating script
to be plain C++. This version of the patch takes advantage of C++11
by using std::function and variadic templates; incorporates Pedro's
patches; and renames the header file to "observable.h" (this change
eliminates the need for a clean rebuild).
Note that Pedro's patches used a template lambda in tui-hooks.c, but
this failed to compile on some buildbot instances (presumably due to
differing C++ versions); I replaced this with an ordinary template
function.
Regression tested on the buildbot.
gdb/ChangeLog
2018-03-19 Pedro Alves <palves@redhat.com>
Tom Tromey <tom@tromey.com>
* unittests/observable-selftests.c: New file.
* common/observable.h: New file.
* observable.h: New file.
* ada-lang.c, ada-tasks.c, agent.c, aix-thread.c, annotate.c,
arm-tdep.c, auto-load.c, auxv.c, break-catch-syscall.c,
breakpoint.c, bsd-uthread.c, cli/cli-interp.c, cli/cli-setshow.c,
corefile.c, dummy-frame.c, event-loop.c, event-top.c, exec.c,
extension.c, frame.c, gdbarch.c, guile/scm-breakpoint.c,
infcall.c, infcmd.c, inferior.c, inflow.c, infrun.c, jit.c,
linux-tdep.c, linux-thread-db.c, m68klinux-tdep.c,
mi/mi-cmd-break.c, mi/mi-interp.c, mi/mi-main.c, objfiles.c,
ppc-linux-nat.c, ppc-linux-tdep.c, printcmd.c, procfs.c,
python/py-breakpoint.c, python/py-finishbreakpoint.c,
python/py-inferior.c, python/py-unwind.c, ravenscar-thread.c,
record-btrace.c, record-full.c, record.c, regcache.c, remote.c,
riscv-tdep.c, sol-thread.c, solib-aix.c, solib-spu.c, solib.c,
spu-multiarch.c, spu-tdep.c, stack.c, symfile-mem.c, symfile.c,
symtab.c, thread.c, top.c, tracepoint.c, tui/tui-hooks.c,
tui/tui-interp.c, valops.c: Update all users.
* tui/tui-hooks.c (tui_bp_created_observer)
(tui_bp_deleted_observer, tui_bp_modified_observer)
(tui_inferior_exit_observer, tui_before_prompt_observer)
(tui_normal_stop_observer, tui_register_changed_observer):
Remove.
(tui_observers_token): New global.
(attach_or_detach, tui_attach_detach_observers): New functions.
(tui_install_hooks, tui_remove_hooks): Use
tui_attach_detach_observers.
* record-btrace.c (record_btrace_thread_observer): Remove.
(record_btrace_thread_observer_token): New global.
* observer.sh: Remove.
* observer.c: Rename to observable.c.
* observable.c (namespace gdb_observers): Define new objects.
(observer_debug): Move into gdb_observers namespace.
(struct observer, struct observer_list, xalloc_observer_list_node)
(xfree_observer_list_node, generic_observer_attach)
(generic_observer_detach, generic_observer_notify): Remove.
(_initialize_observer): Update.
Don't include observer.inc.
* Makefile.in (generated_files): Remove observer.h, observer.inc.
(clean mostlyclean): Likewise.
(observer.h, observer.inc): Remove targets.
(SUBDIR_UNITTESTS_SRCS): Add observable-selftests.c.
(COMMON_SFILES): Use observable.c, not observer.c.
* .gitignore: Remove observer.h.
gdb/doc/ChangeLog
2018-03-19 Tom Tromey <tom@tromey.com>
* observer.texi: Remove.
gdb/testsuite/ChangeLog
2018-03-19 Tom Tromey <tom@tromey.com>
* gdb.gdb/observer.exp: Remove.
Many projects (e.g. the Linux kernel) and build systems use "silent"
rules, which means that they'll only print a summary of what's being
done instead of printing all the detailed command lines. While chatting
on the #gdb IRC channel, I realized a few people (including me) thought
it would be nice to have it in GDB too.
The idea is that too much text is not useful, the important information
gets lost. If there's only the essential information, it's more likely
to be useful. Most of the time, when I look at the build output, it's
to see how it's progressing. By just printing a brief summary of each
operation, I can easily spot what's currently being compiled and
therefore how the build progresses (with time you know the order in
which files are compiled almost by heart).
As with other projects (Linux, automake-based things, probably others),
it's possible to print the complete command lines by passing V=1 to make
(or any other non-zero value).
I had one hesitation about this: when people report build failures, we
are more likely to miss the full compile command line. We'll probably
sometimes need to ask people to include the build log with "make V=1".
I don't think it's a big downside, if other projects the size of the
Linux kernel can live with it, I'm sure we can too.
gdb/ChangeLog:
* silent-rules.mk: New.
* Makefile.in: Include silent-rules.mk
(srcdir, VPATH, top_srcdir): Move up.
(COMPILE): Add ECHO_CXX.
(test-cp-name-parser$(EXEEXT)): Add ECHO_CXXLD.
(init.c): Add ECHO_INIT_C.
(gdb$(EXEEXT)): Add SILENCE and ECHO_CXXLD.
(version.c): Add ECHO_GEN.
(printcmd.o): Add ECHO_CXX.
(target-float.o): Add ECHO_CXX.
(ada-exp.o): Add ECHO_CXX.
(stamp-xml): Add SILENCE and ECHO_GEN_XML_BUILTIN.
(insight$(EXEEXT)): Add ECHO_CXXLD.
* gnulib/configure.ac: Add AM_SILENT_RULES.
* gnulib/aclocal.m4: Re-generate.
* gnulib/configure: Re-generate.
* gnulib/import/Makefile.in: Re-generate.
gdb/gdbserver/ChangeLog:
* Makefile.in: Include silent-rules.mk.
(srcdir, abs_top_srcdir, abs_srcdir, VPATH): Move up.
(COMPILE): Add ECHO_CXX.
(gdbserver$(EXEEXT)): Add SILENCE and ECHO_CXXLD.
(gdbreplay$(EXEEXT)): Add SILENCE and ECHO_CXXLD.
($(IPA_LIB)): Add SILENCE and ECHO_CXXLD.
(version-generated.c): Add ECHO_GEN.
(stamp-xml): Add SILENCE and ECHO_GEN_XML_BUILTIN_GENERATED.
(IPAGENT_COMPILE): Add ECHO_CXX.
(%-generated.c): Add ECHO_REGDAT.
This patch add some unit tests for the substitute_path_component
function.
gdb/ChangeLog:
* Makefile.in (SUBDIR_UNITTESTS_SRCS): Add
unittests/utils-selftests.c.
* unittests/utils-selftests.c: New file.
This commit introduces basic support for baremetal RiscV as a GDB
target. This target is currently only tested against the RiscV software
simulator, which is not included as part of this commit. The target has
been tested against the following RiscV variants: rv32im, rv32imc,
rv32imf, rv32imfc, rv64im, rv64imc, rv64imfd, rv64imfdc.
Across these variants we pass on average 34858 tests, and fail 272
tests, which is ~0.8%.
The RiscV has a feature of its ABI where structures with a single
floating point field, a single complex float field, or one float and
one integer field are treated differently for argument passing. The
new test gdb.base/infcall-nested-structs.exp is added to cover this
feature. As passing these structures should work on all targets then
I've made the test as a generic one, even though, for most targets,
there's probably nothing special about any of these cases.
gdb/ChangeLog:
* Makefile.in (ALL_TARGET_OBS): Add riscv-tdep.o
(HFILES_NO_SRCDIR): Add riscv-tdep.h.
(ALLDEPFILES): Add riscv-tdep.c
* configure.tgt: Add riscv support.
* riscv-tdep.c: New file.
* riscv-tdep.h: New file.
* NEWS: Mention new target.
* MAINTAINERS: Add entry for riscv.
gdb/testsuite/ChangeLog:
* gdb.base/infcall-nested-structs.exp: New file.
* gdb.base/infcall-nested-structs.c: New file.
* gdb.base/float.exp: Add riscv support.
This commit moves the path manipulation routines found on utils.c to a
new common/pathstuff.c, and updates the Makefile.in's accordingly.
The routines moved are "gdb_realpath", "gdb_realpath_keepfile" and
"gdb_abspath".
This will be needed because gdbserver will have to call "gdb_abspath"
on my next patch, which implements a way to expand the path of the
inferior provided by the user in order to allow specifying just the
binary name when starting gdbserver, like:
$ gdbserver :1234 a.out
With the recent addition of the startup-with-shell feature on
gdbserver, this scenario doesn't work anymore if the user doesn't have
the current directory listed in the PATH variable.
I had to do a minor adjustment on "gdb_abspath" because we don't have
access to "tilde_expand" on gdbserver, so now the function is using
"gdb_tilde_expand" instead. Otherwise, the code is the same.
Regression tested on the BuildBot, without regressions.
gdb/ChangeLog:
2018-02-28 Sergio Durigan Junior <sergiodj@redhat.com>
* Makefile.in (COMMON_SFILES): Add "common/pathstuff.c".
(HFILES_NO_SRCDIR): Add "common/pathstuff.h".
* auto-load.c: Include "common/pathstuff.h".
* common/common-def.h (current_directory): Move here.
* common/gdb_tilde_expand.c (gdb_tilde_expand_up): New
function.
* common/gdb_tilde_expand.h (gdb_tilde_expand_up): New
prototype.
* common/pathstuff.c: New file.
* common/pathstuff.h: New file.
* compile/compile.c: Include "common/pathstuff.h".
* defs.h (current_directory): Move to "common/common-defs.h".
* dwarf2read.c: Include "common/pathstuff.h".
* exec.c: Likewise.
* guile/scm-safe-call.c: Likewise.
* linux-thread-db.c: Likewise.
* main.c: Likewise.
* nto-tdep.c: Likewise.
* objfiles.c: Likewise.
* source.c: Likewise.
* symtab.c: Likewise.
* utils.c: Include "common/pathstuff.h".
(gdb_realpath): Move to "common/pathstuff.c".
(gdb_realpath_keepfile): Likewise.
(gdb_abspath): Likewise.
* utils.h (gdb_realpath): Move to "common/pathstuff.h".
(gdb_realpath_keepfile): Likewise.
(gdb_abspath): Likewise.
gdb/gdbserver/ChangeLog:
2018-02-28 Sergio Durigan Junior <sergiodj@redhat.com>
* Makefile.in (SFILES): Add "$(srcdir)/common/pathstuff.c".
(OBJS): Add "pathstuff.o".
* server.c (current_directory): New global variable.
(captured_main): Initialize "current_directory".
unpack_bits_as_long is documented as sign-extending its result when
the type is signed. However, it was only doing sign-extension in the
case where the field was a bitfield -- that is, not when the "bitsize"
parameter was 0, indicating the size should be taken from the type.
Also, unpack_bits_as_long was incorrectly computing the shift for
big-endian architectures for the non-bitfield case.
This patch fixes these bugs in a straightforward way. A new selftest
is included.
2018-02-26 Tom Tromey <tom@tromey.com>
* Makefile.in (SUBDIR_UNITTESTS_SRCS): Add
unittests/unpack-selftests.c.
* unittests/unpack-selftests.c: New file.
* value.c (unpack_bits_as_long): Fix bugs in non-bitfield cases.
Currently all target dependent code for s390 is in one file,
s390-linux-tdep.c. This includes code general for the architecture as
well as code specific for uses in GNU/Linux (user space). Up until now
this was OK as GNU/Linux was the only supported OS. In preparation to
support the new Linux kernel 'OS' split up the existing s390 code into a
general s390-tdep and a GNU/Linux-specific s390-linux-tdep.
Note: The record-replay feature will be moved in a separate patch. This
is simply due to the fact that the combined patch would be too large for
the mailing list. This requires setting the process_record hook during
OSABI init to keep the code bisectable. The patch moving record-replay
cleans up this hack.
gdb/ChangeLog:
* s390-linux-nat.c (s390-tdep.h): New include.
* Makefile.in (ALL_TARGET_OBS): Add s390-tdep.o.
(HFILES_NO_SRCDIR): Add s390-tdep.h.
(ALLDEPFILES): Add s390-tdep.c.
* configure.tgt (s390*-*-linux*): Add s390-tdep.o.
* s390-linux-tdep.h (HWCAP_S390_*, S390_*_REGNUM): Move to...
* s390-tdep.h: ...this. New file.
* s390-linux-tdep.c (s390-tdep.h): New include.
(_initialize_s390_tdep): Rename to...
(_initialize_s390_linux_tdep): ...this and adjust.
(s390_abi_kind, s390_vector_abi_kind, gdbarch_tdep)
(enum named opcodes, S390_NUM_GPRS, S390_NUM_FPRS): Move to
s390-tdep.h.
(s390_break_insn, s390_breakpoint, s390_readinstruction, is_ri)
(is_ril, is_rr, is_rre, is_rs, is_rsy, is_rx, is_rxy)
(s390_is_partial_instruction, s390_software_single_step)
(is_non_branch_ril, s390_displaced_step_copy_insn)
(s390_displaced_step_fixup, s390_displaced_step_hw_singlestep)
(s390_prologue_data, s390_addr, s390_store, s390_load)
(s390_check_for_saved, s390_analyze_prologue, s390_skip_prologue)
(s390_register_call_saved, s390_guess_tracepoint_registers)
(s390_register_name, s390_dwarf_regmap, s390_dwarf_reg_to_regnum)
(regnum_is_gpr_full, regnum_is_vxr_full, s390_value_from_register)
(s390_pseudo_register_name, s390_pseudo_register_type)
(s390_pseudo_register_read, s390_pseudo_register_write)
(s390_pseudo_register_reggroup_p, s390_ax_pseudo_register_collect)
(s390_ax_pseudo_register_push_stack, s390_gen_return_address)
(s390_addr_bits_remove, s390_address_class_type_flags)
(s390_address_class_type_flags_to_name)
(s390_address_class_name_to_type_flags, s390_effective_inner_type)
(s390_function_arg_float, s390_function_arg_vector)
(is_power_of_two, s390_function_arg_integer, s390_arg_state)
(s390_handle_arg, s390_push_dummy_call, s390_dummy_id)
(s390_frame_align, s390_register_return_value, s390_return_value)
(s390_stack_frame_destroyed_p, s390_unwind_pc, s390_unwind_sp)
(s390_unwind_pseudo_register, s390_adjust_frame_regnum)
(s390_dwarf2_prev_register, s390_dwarf2_frame_init_reg)
(s390_trad_frame_prev_register, s390_unwind_cache)
(s390_prologue_frame_unwind_cache)
(s390_backchain_frame_unwind_cache, s390_frame_unwind_cache)
(s390_frame_this_id, s390_frame_prev_register, s390_frame_unwind)
(s390_stub_unwind_cache, s390_stub_frame_unwind_cache)
(s390_stub_frame_this_id, s390_stub_frame_prev_register)
(s390_stub_frame_sniffer, s390_stub_frame_unwind)
(s390_frame_base_address, s390_local_base_address)
(s390_frame_base, s390_gcc_target_options)
(s390_gnu_triplet_regexp, s390_stap_is_single_operand)
(s390_validate_reg_range, s390_tdesc_valid)
(s390_gdbarch_tdep_alloc, s390_gdbarch_init): Move to...
* s390-tdep.c: ...this. New file.
This patch removes the MT port. The removal was annoucned
https://sourceware.org/ml/gdb-announce/2017/msg00006.html
I'll remove MT from the top-level configure later.
gdb:
2018-01-22 Yao Qi <yao.qi@linaro.org>
* Makefile.in (ALL_TARGET_OBS): Remove mt-tdep.o.
* configure.tgt: Remove target mt.
* mt-tdep.c: Remove.
* regcache.c (cooked_read_test): Remove the check for mt.
The "gdb-add-index" script has been resurrected on:
commit caf26be91a
Author: Samuel Bronson <naesten@gmail.com>
Date: Fri Nov 15 16:09:33 2013 -0500
Resurrect gdb-add-index as a contrib script
However, for some reason (I couldn't find it in the archives), only
the script has been checked-in; the Makefile parts responsible for
installing it in the system were left out. This commit fixes that, by
also resurrecting the Makefile and documentation bits.
This commit is part of our effort to upstream the local Fedora GDB
changes. With this commit, we'll only carry a very small
Fedora-specific modification to the script.
gdb/ChangeLog:
2017-01-12 Tom Tromey <tom@tromey.com>
Sergio Durigan Junior <sergiodj@redhat.com>
* Makefile.in (install-only): Install gdb-add-index.
gdb/doc/ChangeLog:
2017-01-12 Tom Tromey <tom@tromey.com>
Sergio Durigan Junior <sergiodj@redhat.com>
* gdb.texinfo (Index Files): Mention gdb-add-index.
(gdb-add-index man): New section.
* Makefile.in (gdb-add-index.1): New rule to generate manpage
from gdb.texinfo.
We don't build GDB selftests bits when $development is false. However, if
we turn bfd/development.sh:$development to false, common/selftest.c is
compiled which is not expected. It causes the build failure,
selftest.o: In function `selftests::run_tests(char const*)':
binutils-gdb/gdb/common/selftest.c:97: undefined reference to `selftests::reset()'
collect2: error: ld returned 1 exit status
I fix this issue by putting selftest.o selftest-arch.o into CONFIG_OBS
only when $development is true. After this is fixed, there are other
build failures in maint.c, this patch fixes them as well.
In the release mode, the output of these commands are:
(gdb) maintenance selftest
Selftests are not available in a non-development build.
(gdb) maintenance selftest foo
Selftests are not available in a non-development build.
(gdb) maintenance info selftests
Selftests are not available in a non-development build.
gdb:
2018-01-08 Yao Qi <yao.qi@linaro.org>
Simon Marchi <simon.marchi@ericsson.com>
* Makefile.in (COMMON_SFILES): Remove selftest-arch.c and
common/selftest.c.
(COMMON_OBS): Remove selftest.o.
* configure.ac: Append selftest-arch.c and common/selftest.c to
CONFIG_SRCS. Append selftest-arch.o and selftest.o to COMMON_OBS.
* configure: Re-generated.
* maint.c (maintenance_selftest): Wrap selftests::run_tests with
GDB_SELF_TEST.
(maintenance_info_selftests): Likewise.
gdb/testsuite:
2018-01-08 Simon Marchi <simon.marchi@ericsson.com>
* gdb.gdb/unittest.exp: Match output in non-development mode.
On irc, Pedro pointed out that dependencies for objects in
subdirectories didn't seem to be working.
The bug was that the "-include" for .deps files was using the wrong file
name for subdirectory objects; e.g., for cli/cli-decode.o it was trying
to open .deps/cli/cli-decode.o, whereas the correct file is
cli/.deps/cli-decode.o.
This patch changes how the dep files are found. Tested by touching a
source file and rebuilding cli/cli-decode.o.
2017-12-01 Tom Tromey <tom@tromey.com>
* Makefile.in (all_deps_files): New variable.
Include .Po files using all_deps_files.
Joel pointed out that gdb snapshots were broken by my Makefile patch
series. The bug is that rmdir in distclean was failing, because the
directory did not exist. This fixes the bug by only invoking rmdir when
the directory exists.
Tested using "src-release.sh gdb".
2017-11-29 Tom Tromey <tom@tromey.com>
* Makefile.in (distclean): Handle the case where rmdir fails.
This removes REMOTE_OBS from the Makefile. It is no longer needed, as
remote support is always built into gdb. The relevant sources are now
added to COMMON_SFILES, where they are treated like other ordinary
sources.
ChangeLog
2017-11-27 Tom Tromey <tom@tromey.com>
* Makefile.in (REMOTE_OBS): Remove.
(SFILES): Remove remote sources.
(COMMON_SFILES): Add remote sources.
(ALLDEPFILES): Remove dcache.c.
Move the object files corresponding to target/*.c to the target
subdirectory in the build tree.
ChangeLog
2017-11-27 Tom Tromey <tom@tromey.com>
* Makefile.in (SUBDIR_TARGET_SRCS, SUBDIR_TARGET_OBS): New
variables.
(SFILES): Use SUBDIR_TARGET_SRCS.
(COMMON_OBS): Use SUBDIR_TARGET_OBS. Remove waitstatus.o.
(CONFIG_SRC_SUBDIR): Add target.
(%.o): Remove target rule.
While working on the previous patch, I found a few .o files whose
corresponding .c file was not mentioned in Makefile.in. This patch
fixes the problem. I pulled this out separately to make it simpler to
review.
ChangeLog
2017-11-27 Tom Tromey <tom@tromey.com>
* Makefile.in (COMMON_OBS): Remove filename-seen-cache.o,
registry.o, thread-fsm.o, debug.o.
(COMMON_SFILES): Add filename-seen-cache.c, registry.c,
thread-fsm.c, debug.c.
This introduces a new COMMON_SFILES variable, and then defines some of
COMMON_OBS in terms of this new variable. This simpifies adding a new
ordinary source file.
ChangeLog
2017-11-27 Tom Tromey <tom@tromey.com>
* Makefile.in (COMMON_SFILES): New.
(SFILES): Move some entries to COMMON_SFILES.
(COMMON_OBS): Use COMMON_SFILES.
Change YYOBJ to be defined in terms of YYFILES.
ChangeLog
2017-11-27 Tom Tromey <tom@tromey.com>
* Makefile.in (YYFILES): Update comment.
(YYOBJ): Redefine.
Move the object files corresponding to python/*.c to the python
subdirectory in the build tree.
Because special CFLAGS are passed just to Python compilations, this
patch also required the addition of a pattern rule to update
INTERNAL_CFLAGS for here.
ChangeLog
2017-11-27 Tom Tromey <tom@tromey.com>
* Makefile.in (SUBDIR_PYTHON_OBS): Redefine.
(CONFIG_SRC_SUBDIR): Add python.
(%.o): Remove python rule.
(python/%.o): New rule.
* configure: Rebuild.
* configure.ac (CONFIG_OBS): Refer to python/python.o
Move the object files corresponding to guile/*.c to the guile
subdirectory in the build tree.
ChangeLog
2017-11-27 Tom Tromey <tom@tromey.com>
* configure: Rebuild.
* configure.ac (CONFIG_OBS): Refer to guile/guile.o.
* Makefile.in (SUBDIR_GUILE_OBS): Redefine.
(CONFIG_SRC_SUBDIR): Add guile.
(%.o): Remove guile rule.
Move the object files corresponding to unittests/*.c to the unittests
subdirectory in the build tree.
ChangeLog
2017-11-27 Tom Tromey <tom@tromey.com>
* Makefile.in (SUBDIR_UNITTESTS_OBS): Redefine.
(%.o): Remove unittests rule.
(CONFIG_SRC_SUBDIR): Add unittests.
Move the object files corresponding to tui/*.c to the tui subdirectory
in the build tree.
ChangeLog
2017-11-27 Tom Tromey <tom@tromey.com>
* Makefile.in (SUBDIR_TUI_OBS): Redefine.
(CONFIG_SRC_SUBDIR): Add tui.
(%.o): Remove tui rule.
Move the object files corresponding to compile/*.c to the compile
subdirectory in the build tree.
ChangeLog
2017-11-27 Tom Tromey <tom@tromey.com>
* Makefile.in (SUBDIR_GCC_COMPILE_OBS): Redefine.
(%.o): Remove compile rule.
(CONFIG_SRC_SUBDIR): Add compile.
Move object files corresponding to mi/*.c to a subdirectory in the
build tree.
ChangeLog
2017-11-27 Tom Tromey <tom@tromey.com>
* Makefile.in (SUBDIR_MI_OBS): Redefine.
(%.o): Remove mi rule.
(CONFIG_SRC_SUBDIR): Add mi.
(COMMON_OBS): Use mi/mi-common.o
Following the "arch" move, this moves the object files corresponding
to the cli/*.c source files to the "cli" build directory.
ChangeLog
2017-11-27 Tom Tromey <tom@tromey.com>
* Makefile.in (SUBDIR_CLI_OBS): Redefine.
(%.o): Remove cli rule.
(CONFIG_SRC_SUBDIR): Add cli.
This implements a simpler way to make the "arch" build directory --
namely, now it is done as an order-only dependency in the Makefile,
rather than being created when config.status is run. This simpler
because it means that the build directories can be changed without
re-running autoconf.
ChangeLog
2017-11-27 Tom Tromey <tom@tromey.com>
* configure.ac (CONFIG_SRC_SUBDIR): Don't subst.
* configure: Rebuild.
* Makefile.in (CONFIG_SRC_SUBDIR): Redefine.
(CONFIG_DEP_SUBDIR): New variable.
(%.o): Add order-only dependency.
($(CONFIG_DEP_SUBDIR)): New target.
This patch C++ifies the thread_item and threads_listing_context
structures in remote.c. thread_item::{extra,name} are changed to
std::string. As a result, there's a bit of awkwardness in
remote_update_thread_list, where we have to xstrdup those strings when
filling the private_thread_info structure. This is removed in the
following patch, where private_thread_info is also C++ified and its
corresponding fields made std::string too. The xstrdup then becomes an
std::move.
Other than that there's nothing really special, it's a usual day-to-day
VEC -> vector and char* -> std::string change. It allows removing a
cleanup in remote_update_thread_list.
Note that an overload of hex2bin that returns a gdb::byte_vector is
added, with corresponding selftests.
gdb/ChangeLog:
* remote.c (struct thread_item): Add constructor, disable copy
construction and copy assignment, define default move
construction and move assignment.
<extra, name>: Change type to std::string.
<core>: Initialize.
<thread_handle>: Make non-pointer.
(thread_item_t): Remove typedef.
(DEF_VEC_O(thread_item_t)): Remove.
(threads_listing_context) <contains_thread>: New method.
<remove_thread>: New method.
<items>: Change type to std::vector.
(clear_threads_listing_context): Remove.
(threads_listing_context_remove): Remove.
(remote_newthread_step): Use thread_item constructor, adjust to
change to std::vector.
(start_thread): Use thread_item constructor, adjust to change to
std::vector.
(end_thread): Adjust to change to std::vector and std::string.
(remote_get_threads_with_qthreadinfo): Use thread_item
constructor, adjust to std::vector.
(remote_update_thread_list): Adjust to change to std::vector and
std::string, use threads_listing_context methods.
(remove_child_of_pending_fork): Adjust.
(remove_new_fork_children): Adjust.
* Makefile.in (SUBDIR_UNITTESTS_SRCS): Add rsp-low-selftests.c.
(SUBDIR_UNITTESTS_OBS): Add rsp-low-selftests.o.
* unittests/rsp-low-selftests.c: New file.
* common/rsp-low.h: Include common/byte-vector.h.
(hex2bin): New overload.
* common/rsp-low.c (hex2bin): New overload.
This second patch introduces mfpr_float_ops, an new implementation
of target_float_ops. This implements precise emulation of target
floating-point formats using the MPFR library. This is then used
to perform operations on types that do not match any host type.
Note that use of MPFR is still not required. The patch adds
a configure option --with-mpfr similar to --with-expat. If use of
MPFR is disabled via the option or MPFR is not available, code will
fall back to current behavior. This means that operations on types
that do not match any host type will be implemented on the host
long double type instead.
A new test case verifies that we can correctly print the largest
__float128 value now.
gdb/ChangeLog:
2017-11-22 Ulrich Weigand <uweigand@de.ibm.com>
* NEWS: Document use of GNU MPFR.
* README: Likewise.
* Makefile.in (LIBMPFR): Add define.
(CLIBS): Add $(LIBMPFR).
* configure.ac: Add --with-mpfr configure option.
* configure: Regenerate.
* config.in: Regenerate.
* target-float.c [HAVE_LIBMPFR]: Include <mpfr.h>.
(class mpfr_float_ops): New type.
(mpfr_float_ops::from_target): Two new overloaded functions.
(mpfr_float_ops::to_target): Likewise.
(mpfr_float_ops::to_string): New function.
(mpfr_float_ops::from_string): Likewise.
(mpfr_float_ops::to_longest): Likewise.
(mpfr_float_ops::from_longest): Likewise.
(mpfr_float_ops::from_ulongest): Likewise.
(mpfr_float_ops::to_host_double): Likewise.
(mpfr_float_ops::from_host_double): Likewise.
(mpfr_float_ops::convert): Likewise.
(mpfr_float_ops::binop): Likewise.
(mpfr_float_ops::compare): Likewise.
(get_target_float_ops): Use mpfr_float_ops if available.
gdb/doc/ChangeLog:
2017-11-22 Ulrich Weigand <uweigand@de.ibm.com>
* gdb.texinfo (Requirements): Document use of GNU MPFR.
gdb/testsuite/ChangeLog:
2017-11-22 Ulrich Weigand <uweigand@de.ibm.com>
* gdb.base/float128.c (large128): New variable.
* gdb.base/float128.exp: Add test to print largest __float128 value.
In my patch
Get rid of VEC (mem_region)
a664f67e50
I introduced a regression, where the length of the memory region is
assigned to the "hi" field. It should obviously be computed as "start +
length". To my defense, no test had caught this :). As a penance, I
wrote one.
gdb/ChangeLog:
* Makefile.in (SUBDIR_UNITTESTS_SRCS): Add
memory-map-selftests.c.
(SUBDIR_UNITTESTS_OBS): Add memory-map-selftests.o.
* memory-map.c (memory_map_start_memory): Fix computation of hi
address.
* unittests/memory-map-selftests.c: New file.
A few places in the completion code look for a "(" to find a
function's parameter list, in order to strip it, because psymtabs (and
gdb index) don't include parameter info in the symbol names.
See compare_symbol_name and
default_collect_symbol_completion_matches_break_on.
This is too naive. Consider:
ns_overload2_test::([TAB]
We'd want to complete that to:
ns_overload2_test::(anonymous namespace)::struct_overload2_test
Or:
b (anonymous namespace)::[TAB]
That currently completes to:
b (anonymous namespace)
Which is obviously broken. This patch makes that work.
Also, the current compare_symbol_name hack means that while this
works:
"b function([TAB]" -> "b function()"
This does not:
"b function ([TAB]"
This patch fixes that. Whitespace "ignoring" now Just Works, i.e.,
assuming a symbol named "function(int, long)", this:
b function ( int , lon[TAB]
completes to:
b function ( int , long)
To address all of this, this patch builds on top of the rest of the
series, and pushes the responsibility of stripping parameters from a
lookup name to the new lookup_name_info object, where we can apply
per-language rules. Also note that we now only make a version of the
lookup name with parameters stripped out where it's actually required
to do that, in the psymtab and GDB index code.
For C++, the right way to strip parameters is with "cp_remove_params",
which uses a real parser (cp-name-parser.y) to split the name into a
component tree and then discards parameters.
The trouble for completion is that in that case we have an incomplete
name, like "foo::func(int" and thus cp_remove_params throws an error.
This patch sorts that by adding a cp_remove_params_if_any variant of
cp_remove_params that tries removing characters from the end of the
string until cp_remove_params works. So cp_remove_params_if_any
behaves like this:
With a complete name:
"foo::func(int)" => foo::func(int) # cp_remove_params_1 succeeds the first time.
With an incomplete name:
"foo::func(int" => NULL # cp_remove_params fails the first time.
"foo::func(in" => NULL # and again...
"foo::func(i" => NULL # and again...
"foo::func(" => NULL # and again...
"foo::func" => "foo::func" # success!
Note that even if this approach removes significant rightmost
characters, it's still OK, because this parameter stripping is only
necessary for psymtabs and gdb index, where we're determining whether
to expand a symbol table. Say cp_remove_params_if_any returned
"foo::" above for "foo::func(int". That'd cause us to expand more
symtabs than ideal (because we'd expand all symtabs with symbols that
start with "foo::", not just "foo::func"), but then when we actually
look for completion matches, we'd still use the original lookup name,
with parameter information ["foo::func(int"], and thus we'll return no
false positive to the user. Whether the stripping works as intended
and doesn't strip too much is thus covered by a unit test instead of a
testsuite test.
The "if_any" part of the name refers to the fact that while
cp_remove_params returns NULL if the input name has no parameters in
the first place, like:
"foo::func" => NULL # cp_remove_params
cp_remove_params_if_any still returns the function name:
"foo::func" => "foo::func" # cp_remove_params_if_any
gdb/ChangeLog:
2017-11-08 Pedro Alves <palves@redhat.com>
* Makefile.in (SUBDIR_UNITTESTS_SRCS): Add
unittests/lookup_name_info-selftests.c.
(SUBDIR_UNITTESTS_OBS): Add lookup_name_info-selftests.o.
* cp-support.c: Include "selftest.h".
(cp_remove_params_1): Rename from cp_remove_params. Add
'require_param' parameter, and handle it.
(cp_remove_params): Reimplement.
(cp_remove_params_if_any): New.
(selftests::quote): New.
(selftests::check_remove_params): New.
(selftests::test_cp_remove_params): New.
(_initialize_cp_support): Install
selftests::test_cp_remove_params.
* cp-support.h (cp_remove_params_if_any): Declare.
* dwarf2read.c :Include "selftest.h".
(dw2_expand_symtabs_matching_symbol): Use
lookup_name_info::make_ignore_params.
(selftests::dw2_expand_symtabs_matching::mock_mapped_index)
(selftests::dw2_expand_symtabs_matching::string_or_null)
(selftests::dw2_expand_symtabs_matching::check_match)
(selftests::dw2_expand_symtabs_matching::test_symbols)
(selftests::dw2_expand_symtabs_matching::run_test): New.
(_initialize_dwarf2_read): Register
selftests::dw2_expand_symtabs_matching::run_test.
* psymtab.c (psym_expand_symtabs_matching): Use
lookup_name_info::make_ignore_params.
* symtab.c (demangle_for_lookup_info::demangle_for_lookup_info):
If the lookup name wants to ignore parameters, strip them.
(compare_symbol_name): Remove sym_text/sym_text_len parameters and
code handling '('.
(completion_list_add_name): Don't pass down sym_text/sym_text_len.
(default_collect_symbol_completion_matches_break_on): Don't try to
strip parameters.
* symtab.h (lookup_name_info::lookup_name_info): Add
'ignore_parameters' parameter.
(lookup_name_info::ignore_parameters)
(lookup_name_info::make_ignore_params): New methods.
(lookup_name_info::m_ignore_parameters): New field.
* unittests/lookup_name_info-selftests.c: New file.
This commit garbage collects the termio and sgtty support.
GDB's terminal handling code still has support for the old termio and
sgtty interfaces in addition to termios. However, I think it's pretty
safe to assume that for a long, long time, Unix-like systems provide
termios. GNU/Linux, Solaris, Cygwin, AIX, DJGPP, macOS and the BSDs
all have had termios.h for many years. Looking around the web, I
found discussions about FreeBSD folks trying to get rid of old sgtty.h
a decade ago:
https://lists.freebsd.org/pipermail/freebsd-hackers/2007-March/019983.html
So I think support for termio and sgtty in GDB is just dead code that
is never compiled anywhere and is just getting in the way. For
example, serial_noflush_set_tty_state and the raw<->cooked concerns
mentioned in inflow.c only exist because of sgtty (see
hardwire_noflush_set_tty_state).
Regtested on GNU/Linux.
Confirmed that I can still build Solaris, DJGPP and AIX GDB and that
the resulting GDBs still include the termios.h-guarded code.
Confirmed mingw-w64 GDB still builds and skips the termios.h-guarded
code.
gdb/ChangeLog:
2017-11-06 Pedro Alves <palves@redhat.com>
* Makefile.in (SER_HARDWIRE): Update comment.
(HFILES_NO_SRCDIR): Remove gdb_termios.h.
* common/gdb_termios.h: Delete file.
* common/job-control.c: Include termios.h and unistd.h instead of
gdb_termios.h.
(gdb_setpgid): Remove HAVE_TERMIOS || TIOCGPGRP preprocessor
check.
(have_job_control): Check HAVE_TERMIOS_H instead of HAVE_TERMIOS.
Remove sgtty code.
* configure.ac: No longer check for termio.h and sgtty.h.
* configure: Regenerate.
* inflow.c: Include termios.h instead of gdb_termios.h. Replace
PROCESS_GROUP_TYPE checks with HAVE_TERMIOS_H checks throughout.
Replace PROCESS_GROUP_TYPE references with pid_t references
throughout.
(gdb_getpgrp): Delete.
(set_initial_gdb_ttystate): Use tcgetpgrp instead of gdb_getpgrp.
(child_terminal_inferior): Remove comment. Remove sgtty code.
(child_terminal_ours_1): Use tcgetpgrp directly instead of
gdb_getpgrp. Use serial_set_tty_state instead aof
serial_noflush_set_tty_state. Remove sgtty code.
* inflow.h: Include unistd.h instead of gdb_termios.h. Replace
PROCESS_GROUP_TYPE check with HAVE_TERMIOS_H check.
(inferior_process_group): Now returns pid_t.
* ser-base.c (ser_base_noflush_set_tty_state): Delete.
* ser-base.h (ser_base_noflush_set_tty_state): Delete.
* ser-event.c (serial_event_ops): Update.
* ser-go32.c (dos_noflush_set_tty_state): Delete.
(dos_ops): Update.
* ser-mingw.c (hardwire_ops, tty_ops, pipe_ops, tcp_ops): Update.
* ser-pipe.c (pipe_ops): Update.
* ser-tcp.c (tcp_ops): Update.
* ser-unix.c: Include termios.h instead of gdb_termios.h. Remove
HAVE_TERMIOS checks.
[HAVE_TERMIO] (struct hardwire_ttystate): Delete.
[HAVE_SGTTY] (struct hardwire_ttystate): Delete.
(get_tty_state, set_tty_state): Drop termio and sgtty code, and
assume termios.
(hardwire_noflush_set_tty_state): Delete.
(hardwire_print_tty_state, hardwire_drain_output)
(hardwire_flush_output, hardwire_flush_input)
(hardwire_send_break, hardwire_raw, hardwire_setbaudrate)
(hardwire_setstopbits, hardwire_setparity): Drop termio and sgtty
code, and assume termios.
(hardwire_ops): Update.
(_initialize_ser_hardwire): Remove HAVE_TERMIOS check.
* serial.c (serial_noflush_set_tty_state): Delete.
* serial.h (serial_noflush_set_tty_state): Delete.
(serial_ops::noflush_set_tty_state): Delete.
gdb/gdbserver/ChangeLog:
2017-11-06 Pedro Alves <palves@redhat.com>
* configure.ac: No longer check for termio.h and sgtty.h.
* configure: Regenerate.
* remote-utils.c: Include termios.h instead of gdb_termios.h.
(remote_open): Check HAVE_TERMIOS_H instead of HAVE_TERMIOS.
Remove termio and sgtty code.
Now that all target FP operations are performed via target-float.c,
this file remains the sole caller of functions in doublest.c and dfp.c.
Therefore, this patch merges the latter files into the former and
makes all their function static there.
gdb/ChangeLog:
2017-11-06 Ulrich Weigand <uweigand@de.ibm.com>
* Makefile.in (SFILES): Remove doublest.c and dfp.c.
(HFILES_NO_SRCDIR): Remove doublest.h and dfp.h.
(COMMON_OBS): Remove doublest.o and dfp.o.
Do not build target-float.c (instead of doublest.c)
with -Wformat-nonliteral.
* doublest.c: Remove file.
* doublest.h: Remove file.
* dfp.c: Remove file.
* dfp.h: Remove file.
* target-float.c: Do not include "doublest.h" and "dfp.h".
(DOUBLEST): Move here from doublest.h.
(enum float_kind): Likewise.
(FLOATFORMAT_CHAR_BIT): Likewise.
(FLOATFORMAT_LARGEST_BYTES): Likewise.
(floatformat_totalsize_bytes): Move here from doublest.c. Make static.
(floatformat_precision): Likewise.
(floatformat_normalize_byteorder, get_field, put_field): Likewise.
(floatformat_is_negative, floatformat_classify, floatformat_mantissa):
Likewise.
(host_float_format, host_double_format, host_long_double_format):
Likewise.
(floatformat_to_string, floatformat_from_string): Likewise.
(floatformat_to_doublest): Likewise. Also, inline the original
convert_floatformat_to_doublest.
(floatformat_from_doublest): Likewise. Also, inline the original
convert_floatformat_from_doublest.
Include "dpd/decimal128.h", "dpd/decimal64.h", and "dpd/decimal32.h".
(MAX_DECIMAL_STRING): Move here from dfp.c.
(match_endianness): Likewise.
(set_decnumber_context, decimal_check_errors): Likewise.
(decimal_from_number, decimal_to_number): Likewise.
(decimal_to_string, decimal_from_string): Likewise. Make static.
(decimal_from_longest, decimal_from_ulongest): Likewise.
(decimal_to_longest): Likewise.
(decimal_binop, decimal_is_zero, decimal_compare): Likewise.
(decimal_convert): Likewise.
This patch introduces the new set of target floating-point handling routines
in target-float.{c,h}. In the end, the intention is that this file will
contain support for all operations in target FP format, fully replacing
both the current doublest.{c,h} and dfp.{c,h}.
To begin with, this patch only adds a target_float_is_zero routine,
which handles the equivalent of decimal_is_zero for both binary and
decimal FP. For the binary case, to avoid conversion to DOUBLEST,
this is implemented using the floatformat_classify routine.
However, it turns out that floatformat_classify actually has a bug
(it was not used to check for zero before), so this is fixed as well.
The new routine is used in both value_logical_not and valpy_nonzero.
There is one extra twist: the code previously used value_as_double
to convert to DOUBLEST and then compare against zero. That routine
performs an extra task: it detects invalid floating-point values
and raises an error. In any place where value_as_double is removed
in favor of some target-float.c routine, we need to replace that check.
To keep this check centralized in one place, I've added a new routine
is_floating_value, which returns a boolean determining whether a
value's type is floating point (binary or decimal), and if so, also
performs the validity check. Since we need to check whether a value
is FP before calling any of the target-float routines anyway, this
seems a good place to add the check without much code size overhead.
In some places where we only want to check for floating-point types
and not perform a validity check (e.g. for the *output* of an operation),
we can use the new is_floating_type routine (in gdbarch) instead.
The validity check itself is done by a new target_float_is_valid
routine in target-float, encapsulating floatformat_is_valid.
ChangeLog:
2017-11-06 Ulrich Weigand <uweigand@de.ibm.com>
* Makefile.c (SFILES): Add target-float.c.
(HFILES_NO_SRCDIR): Add target-float.h.
(COMMON_OBS): Add target-float.o.
* target-float.h: New file.
* target-float.c: New file.
* doublest.c (floatformat_classify): Fix detection of float_zero.
* gdbtypes.c (is_floating_type): New function.
* gdbtypes.h (is_floating_type): Add prototype.
* value.c: Do not include "floatformat.h".
(unpack_double): Use target_float_is_valid.
(is_floating_value): New function.
* value.h (is_floating_value): Add prototype-
* valarith.c: Include "target-float.h".
(value_logical_not): Use target_float_is_zero.
* python/py-value.c: Include "target-float.h".
(valpy_nonzero): Use target_float_is_zero.
'make tags' fails with the following error:
make[2]: Entering directory '/local-ssd/mgulick/gdb/git/binutils-gdb/gdb'
make[2]: *** No rule to make target 'gdb.h', needed by 'TAGS'. Stop.
make[2]: Leaving directory '/local-ssd/mgulick/gdb/git/binutils-gdb/gdb'
The file gdb/gdb.h was removed in commit
65630365f7.
gdb/ChangeLog:
2017-10-30 Mike Gulick <mgulick@mathworks.com>
* Makefile.in (HFILES_NO_SRCDIR): Remove reference to gdb.h.
The print_floating routine currently makes a lot of assumptions about host
and target floating point formats. This patch cleans up many of those.
One problem is that print_floating may currently be called with types
that are not actually floating-point types, and it tries hard to output
those as floating-point values anyway. However, there is only one single
caller of print_floating where this can ever happen: print_scalar_formatted.
And in fact, it is much simpler to handle the case where the value to be
printed is not already of floating-point type right there.
So this patch changes print_scalar_formatted to handle the 'f' format
as follows:
- If the value to be printed is already of floating-point type, just
call print_floating on it.
- Otherwise, if there is a standard target floating-point type of
the same size as the value, call print_floating using that type.
- Otherwise, just print the value as if the 'f' format had not been
specified at all.
This has the overall effect to printing everything the same way as
the old code did, but is overall a lot simpler. (Also, it would
allow us to change the above strategy more easily, if that might
be a more intuitive user interface. For example, in the third
case above, maybe an error would be more appropriate?)
Given that change, print_floating can become much simpler. In particular,
we now always have a floating-point format that we can consult. This
means we can use the floating-point format to programmatically determine
the number of digits necessary to print the value.
The current code uses a hard-coded value of 9, 17, or 35 digits. Note
that this matches the DECIMAL_DIG values for IEEE-32, IEEE-64, and
IEEE-128. (Actually, for IEEE-128 the correct value is 36 -- the 35
seems to be an oversight.) The DECIMAL_DIG value is defined to be
the smallest number so that any number in the target format, when
printed to this number of digits and then scanned back into a binary
floating-point number, will result in the original value.
Now that we always have a FP format, we can just compute the DECIMAL_DIG
value using the formula from the C standard. This will be correct for
*all* FP formats, not just the above list, and it will be correct (as
opposed to current code) if the target formats differ from the host ones.
The patch moves the new logic to a new floatformat_to_string routine
(analogous to the existing decimal_to_string). The print_floating
routine now calls floatformat_to_string or decimal_to_string, making
the separate print_decimal_floating and generic_val_print_decfloat routines
unnecessary.
gdb/ChangeLog:
2017-10-24 Ulrich Weigand <uweigand@de.ibm.com>
* doublest.c (floatformat_precision): New routine.
(floatformat_to_string): Likewise.
* doublest.c (floatformat_to_string): Add prototype.
* printcmd.c (print_scalar_formatted): Only call print_floating
on floating-point types.
* valprint.c: Do not include "floatformat.h".
(generic_val_print_decfloat): Remove.
(generic_val_print): Call generic_val_print_float for both
TYPE_CODE_FLT and TYPE_CODE_DECFLOAT.
(print_floating): Use floatformat_to_string. Handle decimal float.
(print_decimal_floating): Remove, merge into floatformat_to_string.
* value.h (print_decimal_floating): Remove.
* Makefile.in: Do not build doublest.c with -Wformat-nonliteral.
This patch replaces the last usages of VEC(mem_range_s) with
std::vector<mem_range>. This allows getting rid of a few cleanups and
of the DEF_VEC_O(mem_range_s).
I added a test for normalize_mem_ranges to make sure I didn't break
anything there.
Regtested on the buildbot.
gdb/ChangeLog:
* memrange.h (struct mem_range): Define operator< and operator==.
(mem_range_s): Remove.
(DEF_VEC_O (mem_range_s)): Remove.
(normalize_mem_ranges): Change parameter type to std::vector.
* memrange.c (compare_mem_ranges): Remove.
(normalize_mem_ranges): Change parameter type to std::vector,
adjust to vector change.
* exec.c (section_table_available_memory): Return vector, remove
parameter.
(section_table_read_available_memory): Adjust to std::vector
change.
* remote.c (remote_read_bytes): Adjust to std::vector
change.
* tracepoint.h (traceframe_available_memory): Change parameter
type to std::vector.
* tracepoint.c (traceframe_available_memory): Change parameter
type to std::vector, adjust.
* gdb/mi/mi-main.c (mi_cmd_trace_frame_collected): Adjust to
std::vector change.
* gdb/Makefile.in (SUBDIR_UNITTESTS_SRCS): Add
unittests/memrange-selftests.c.
(SUBDIR_UNITTESTS_OBS): Add memrange-selftests.o.
* gdb/unittests/memrange-selftests.c: New file.
John Reiser