* config/i386/nm-i386gnu.h: New file.
(THREAD_STATE_FLAVOR, THREAD_STATE_SIZE,
THREAD_STATE_SET_TRACED, THREAD_STATE_CLEAR_STATE, ATTACH_DETACH):
Moved here from ...
* config/i386/tm-i386gnu.h: ... here. Removed.
* config/i386/xm-i386gnu.h: Removed.
* config/i386/i386gnu.mh (XM_FILE): Set to xm-i386.h.
(NAT_FILE): Set to nm-i386gnu.h.
* config/i386/i386gnu.mt (TDEPFILES): Add i386gnu-tdep.o.
* i386-tdep.c: New file.
* Makefile.in (ALLDEPFILES): Add i386gnu-nat.c and i386gnu-tdep.c.
(i386gnu-tdep.o): Specify dependencies.
"i386/tm-i386.h", "i386/tm-i386v.h" and "config/tm-sysv.h".
Adjust a few comments to reflect reality a bit closer.
(KERNEL_U_SIZE, TARGET_HAS_HARDWARE_WATCHPOINTS,
TARGET_CAN_USE_HARDWARE_WATCHPOINT, HAVE_CONTINUEABLE_WATCHPOINT,
HAVE_STEPPABLE_WATCHPOINT, STOPPED_BY_WATCHPOINT,
target_insert_watchpoint, target_remove_watchpoint):
Move defines to ...
* config/i386/nm-i386sco5.h: ... here.
(kernel_u_size): Add prototype. Improve a few comments and add
protection against multiple inclusion.
* i387-tdep.c (print_i387_value, print_i387_ext,
print_i387_status_word, print_i387_control_word): Add `struct
ui_file *' argument and use it for output.
(i387_print_float_info): Renamed from i387_float_info. Add
`struct gdbarch *' and `struct ui_file *' arguments and use the
latter for output.
* i386-tdep.c: Include "i387-tdep.h".
(i386_gdbarch_init): Set print_float_info.
* config/i386/tm-i386.h (i387_float_info): Remove prototype.
(FLOAT_INFO): Remove define.
* mips-tdep.c (mips_push_arguments): Rename to
mips_eabi_push_arguments, and tune for EABI.
(MIPS_REGS_HAVE_HOME_P): Delete.
(struct gdbarch_tdep): Remove mips_regs_have_home_p field.
(mips_gdbarch_init): Set gdbarch push_arguments for eabi.
Delete references to mips_regs_have_home_p.
* mips-tdep.c (mips_o32o64_push_arguments): New function,
cloned from mips_push_arguments, tuned for o32/o64 ABI.
(mips_gdbarch_init): Set gdbarch_push_arguments to new func.
* regcache.c (init_regcache_descr): Overallocate the
raw_register_valid_p array including space for NUM_PSEUDO_REGS.
(registers_changed): Replace NUM_REGS+NUM_PSEUDO_REGS with
num_raw_registers.
(set_register_cached): Add range checking assertions. Use
current_regcache.
(M68HC12_HARD_PC_REGNUM): Define specific PC for 68HC12 (pseudo reg).
(m68hc11_pseudo_register_read): Compute the 68HC12 PC using the
real PC and the page number (if it's within the memory bank window).
(m68hc11_pseudo_register_write): Likewise when saving.
(m68hc11_register_name): Name the virtual pc 'pc' and the real one ppc.
(m68hc11_register_virtual_type): Return uint32 for virtual pc.
(m68hc11_register_raw_size): And use 32-bit for it.
(m68hc11_gdbarch_init): Use 32-bit address for 68HC12 if the
16K memory bank is used by the prog; also use the virtual pc.
(m68hc11_gdbarch_init): Install it in gdbarch.
(MSYMBOL_SET_RTC, MSYMBOL_SET_RTI): New to set symbol specific flags.
(MSYMBOL_IS_RTC, MSYMBOL_IS_RTI): New to test these flags.
(MSYMBOL_SIZE): New for documentation.
(insn_return_kind): Enum to specify how a function returns.
(frame_extra_info): Cleanup and record the return mode.
(gdbarch_tdep, USE_PAGE_REGISTER): New to control the use of page
register in address computation.
(m68hc11_get_return_insn): New to obtain the return instruction used
by the function.
(m68hc11_frame_init_saved_regs): Take into account the return
instruction used by the function for far and interrupt functions.
(m68hc11_init_extra_frame_info): Take into account page register.
(m68hc11_frame_args_address): Adjust according to the return mode.
(show_regs): Print page register only when it's used.
(M68HC11_LAST_HARD_REG, m68hc11_register_names): Update.
(m68hc11_register_virtual_type): Return a 8-bit type for 8-bit
registers.
(m68hc11_register_raw_size): Likewise.
* i386-tdep.c (i386_register_name): Handle mmx registers.
(mmx_regnum_p): New function.
(i386_mmx_names): New array.
(mmx_num_regs): New variable.
(i386_pseudo_register_read): New function.
(i386_pseudo_register_write): New function.
(mmx_regnum_to_fp_regnum): New function. Code from Fernando Nasser.
* regcache.c (regcache_raw_read_unsigned): New function.
(regcache_raw_read_signed): New function.
* regcache.h (regcache_raw_read_unsigned): Declare.
(regcache_raw_read_signed): Declare.
(to_fixed_variant_branch_type) (find_line_in_linetable): Fix
prototype names so that grep ^func works properly.
* ada-lang.c (ada_array_element_type)
(ada_lookup_partial_symbol): Fix typos in parameter list.
* ada-valprint.c (val_print_packed_array_elements) (ada_val_print_1):
Fix prototype names so that grep ^func works properly.
Elena Zannoni <ezannoni@redhat.com>
Martin M. Hunt <hunt@redhat.com>
* gdbtypes.c (build_builtin_type_vec128): Set the vector bit.
(build_builtin_type_vec128i): Set the vector bit.
* gdbtypes.h (builtin_type_vec64, builtin_type_vec64i): Declare.
* gdbtypes.c (builtin_type_vec64, builtin_type_vec64i): Define.
(build_builtin_type_vec64): New function.
(build_builtin_type_vec64i): New function.
(build_gdbtypes): Initialize builtin_type_vec64 and
builtin_type_vec64i.
* mips-tdep.c (ROUND_DOWN, ROUND_UP): Move to global scope.
(mips_push_arguments): Correct some comments. Use paddr_nz
for printing addresses in debug output. Replace static
allocation using MAX_REGISTER_RAW_SIZE with alloca.
(mips_n32n64_push_arguments): New function, cloned from
mips_push_arguments and tuned for the n32/n64 ABI.
(mips_push_register): Buffer needs dynamic allocation.
(mips_print_register): Ditto.
(do_gp_register_row): Ditto.
(mips_store_return_value): Ditto.
(mips_gdbarch_init): Set gdbarch_push_arguments per ABI.
T-packets; the 'a' is not taken as a register number.
(remote_check_watch_resources, remote_stopped_by_watchpoint)
(remote_stopped_data_address): New functions; add to target
vector.
(remote_insert_hw_breakpoint, remote_remove_hw_breakpoint): Change
prototypes to match other implementations of this
function. replace integer argument with pointer -- the length
field in the Z-packet is the length of what is pointed to or 1 if
pointer is null. Add to target vector.
(remote_insert_watchpoint, remote_remove_watchpoint): Add to
target vector.
From Mark Salter:
* remote.c (remote_wait): Add support to extract optional
watchpoint information from T-packet. Ignore unrecognized
optional info in T-packet.
(remote_async_wait): Ditto.
doc:
From Mark Salter:
* gdb.texinfo (Protocol): Document T packet extension to
allow watchpoint address reporting.
* mips-tdep.c (mips_find_saved_regs): Adjust stack according
to MIPS_SAVED_REGSIZE, not GDB_TARGET_IS_MIPS64. Enhance comment.
(mips_gdbarch_init): Set N32 target to be mips64.
* configure.tgt: Make arc-*-* obsolete.
* NEWS: Mention that arc-*-* has been identifed as obsolete.
* MAINTAINERS: Make arc-elf obsolete.
* arc-tdep.c: Make file obsolete.
* config/arc/arc.mt: Ditto.
* config/arc/tm-arc.h: Ditto.
to_insert_watchpoint, to_remove_watchpoint,
to_stopped_by_watchpoint, to_stopped_data_address,
to_region_size_ok_for_hw_watchpoint, to_can_use_hw_breakpoint to
target vecctor. Define their corresponding macros so they call
them.
* target.c: Add default and debug versions of for
to_insert_hw_breakpoint, to_remove_hw_breakpoint,
to_insert_watchpoint, to_remove_watchpoint,
to_stopped_by_watchpoint, to_stopped_data_address,
to_region_size_ok_for_hw_watchpoint, to_can_use_hw_breakpoint.
* gdbinit.in: Move the `dir' commands that add GDB's own source
directory to the search path to the end, so that the `gdb' source
directory will be searched first.
* regcache.c (struct regcache_descr): Rename nr_registers to
nr_cooked_registers. Revise comments describing the structure
member fields.
(init_regcache_descr): Update.
(init_legacy_regcache_descr): Update.
(read_register_gen, write_register_gen): When a cooked register in
the raw register range, directly access the value from the raw
register cache.
(fetch_registers, store_register): Don't access registers[]
directly. Instead, use supply_register() or
regcache_collect() as appropriate.
(find_toc_address): Format hex address with local_hex_string().
* findvar.c (extract_unsigned_integer): Make `addr' parameter
constant. Same for local pointer variables.
(extract_signed_integer): Ditto.
* defs.h (extract_unsigned_integer): Update.
(extract_signed_integer): Update.
* utils.c (prompt_for_continue): Use gdb_readline_wrapper.
* tracepoint.c (read_actions): Use gdb_readline_wrapper.
* top.c (gdb_readline_wrapper): New function.
(command_line_input): Use it.
(base_ops): Rename to base_target.
(ops_attach): Rename to aix_thread_attach.
(ops_detach): Rename to aix_thread_detach.
(ops_resume): Rename to aix_thread_detach.
(ops_wait): Rename to aix_thread_wait.
(ops_kill): Rename to aix_thread_kill.
(init_ops): Rename to init_aix_thread_ops.
(ops_fetch_register): Rename to aix_thread_fetch_register.
(ops_store_register): Rename to aix_thread_store_register.
(ops_mourn_inferior): Rename to aix_thread_mourn_inferior.
(ops_thread_alive): Rename to aix_thread_thread_alive.
(ops_extra_thread_info: Rename to aix_thread_extra_thread_info.
(ops_pid_to_str): Rename to aix_thread_pid_to_str.
(ops_xfer_memory): Rename to aix_thread_xfer_memory.
(fetch_regs_lib): Rename to fetch_regs_user_thread.
(fetch_regs_kern): Rename to fetch_regs_kernel_thread.
(store_regs_lib): Rename to store_regs_user_thread.
(store_regs_kern): Rename to store_regs_kernel_thread.
(init_ops): Don't initialize ops.prepare_to_store.
(store_regs_kern): Pre-fetch register buffers from child,
because some registers may not be in the cache. Copy
regs from register cache only if they are cached.
(store_regs_lib): Copy regs from register cache only
if they are cached.
(fill_sprs32, (fill_sprs64, fill_fprs, fill_gprs32,
fill_gprs64): Ditto.
(fill_sprs64, fill_sprs32): Add selected asserts to make sure that
register sizes (from register cache) match size of buffer holding
register data.
(fill_sprs32): Change parameter types to match those in the ptrace()
buffer.
(store_regs_lib): Likewise, but for 32-bit temporary variables.
(ops_prepare_to_store): Rename loop variable ``i'' to ``regno''.
* aix-thread.c (supply_sprs64): Cosmetic change.
(supply_sprs32): Cosmetic change.
(fill_gprs64, fill_gprs32, fill_fprs, fill_sprs32): New funcs.
(fill_sprs64): Use regcache_collect instead of read_register.
(store_regs_lib): Use regcache_collect instead of
read_register. Use fill_sprs32 instead of fill_sprs64,
if debugging a 32-bit architecture.
(store_regs_kern): Use fill_gprs64 etc. to pull the values
out of the register cache, instead of passing a pointer into
the register cache directly to ptrace. Use regcache_collect
insteaad of read_register.
(ops_prepare_to_store): Use target_read_registers instead
of read_register_bytes.
* config/gdbserver.exp (gdb_load): Don't use TCL varargs.
Improve support for reusing an exec file. Copy exec file
to target, and run gdbserver on the target instead of on the host.
* x86-64-tdep.c: Include "objfiles.h".
(x86_64_gdbarch_init): Set in_solib_call_trampoline to
in_plt_section. From 2002-07-18 Michal Ludvig <mludvig@suse.cz>.
* linux-low.c (regsets_store_inferior_registers): Add free()
at the end of a loop to prevent memory leak.
* linux-x86-64-low.c (x86_64_regmap): Add CS, SS registers.
(X86_64_NUM_GREGS): Count it from the size of x86_64_regmap.
* sim-sh.h: Add enum constants for sh[1-4], sh3e, sh3?-dsp,
renumbering the sh-dsp registers to use distinct numbers.
sim/sh:
* Makefile.in (interp.o): Depend on $(srcroot)/include/gdb/sim-sh.h.
* interp.c: Include "gdb/sim-sh.h".
(sim_store_register, sim_fetch_register): Use constants defined there.
gdb:
* sh-tdep.c (sh_dsp_register_sim_regno): New function.
(sh_gdbarch_init): Use it for sh-dsp.
(frame_state_for): Use gdb_assert to check that fde->cie_ptr is
non-NULL.
(update_context): Do not use __func__. Add missing ``break''.
(update_context): Do not use __func__.
* rs6000-tdep.c (rs6000_gdbarch_init): Remove variable print_insn
and its setting. Set gdbarch instruction printing functions
directly. For non-rs6000 case use new function
gdb_print_insn_powerpc.
(gdb_print_insn_powerpc): New function.
malloc() with xmalloc
* ada-tasks.c (init_task_list): replace calls to free with xfree()
* ada-lang.c (replace_operator_with_call, fill_in_ada_prototype,
ada_finish_decode_line_1, all_sals_for_line
ada_breakpoint_rewrite): replace calls to free() with xfree()
* dwarf2read.c (dwarf2_invalid_attrib_class): New
complaint for invalid attribute class or form.
(read_func_scope): DW_AT_frame_base
better handling of DW_AT_block*.
(dwarf2_add_member_fn): DW_AT_vtable_elem_location
better handling of DW_AT_block*.
(read_common_block): DW_AT_location
better handling of DW_AT_block*.
(read_partial_die): DW_AT_location better handling
of DW_AT_block*.
(new_symbol): DW_AT_external better handling of
DW_AT_block*. Proper initialization of variable
"addr".
(attr_form_is_block): New function that returns true
if the attribute's form is of DW_FORM_block*.
(m68hc11-elf): Disable sim build warnings.
(m32r-elf): Mark as broken obsolete candidate.
(x86_64-linux-gnu): Mark as buildable with -Werror.
(arm-elf): Change -w to ``,'' which enables warnings but not
-Werror.
(struct bstring, struct bcache): Move definition to "bcache.c".
Replaced by opaque declaration.
(bcache_xfree): Replace free_bcache.
(bcache_xmalloc, bcache_memory_used): Declare.
* bcache.c: Update copyright.
(struct bstring, struct bcache): Moved to here from "bcache.h".
Update comments.
(bcache_xmalloc, bcache_memory_used): New functions.
(bcache_xfree): Replace function free_bcache.
* Makefile.in (objfiles.o): Add $(bcache_h).
(objfiles_h): Remove $(bcache_h).
(symfile.o): Add $(bcache_h).
* symmisc.c: Update copyright.
(print_symbol_bcache_statistics): Pass psymbol_cache by value.
(print_objfile_statistics): Use bcache_memory_used.
* symfile.c: Include "bcache.h".
(reread_symbols): Use bcache_xfree.
(reread_symbols): Use bcache_xmalloc and bcache_xfree.
(add_psymbol_to_list): Pass psymbol_cache by value.
(add_psymbol_with_dem_name_to_list): Ditto.
* objfiles.h: Update copyright.
(struct bcache): Declare opaque. Do not include "bcache.h".
(struct objfile): Change psymbol_cache and macro_cache to ``struct
bcache'' pointers.
* dwarf2read.c (macro_start_file): Pass macro_cache by value.
* objfiles.c: Include "bcache.h". Update copyright.
(allocate_objfile): Use bcache_xmalloc to create psymbol_cache and
macro_cache.
(free_objfile): Use bcache_xfree.
Based on patch from Daniel Berlin <dberlin@dberlin.org>.
* buildsym.c: Include "demangle.h" for SYMBOL_INIT_DEMANGLED_NAME.
(finish_block) For non-function blocks, hash the symbol table. For
function blocks, mark the symbol table as unhashed.
* minsyms.c (msymbol_hash): Return hash value without taking modulus.
(msymbol_hash_iw): Likewise.
(add_minsym_to_hash_table): Take modulus of msymbol_hash's return
value.
(add_minsym_to_demangled_hash_table): Likewise for msymbol_hash_iw.
(lookup_minimal_symbol): Likewise for both.
* symtab.h (struct block): Add `hashtable' flag. Comment the
hashtable.
(BLOCK_HASHTABLE, BLOCK_BUCKETS, BLOCK_BUCKET): New macro.
(ALL_BLOCK_SYMBOLS): Update.
(BLOCK_SHOULD_SORT): Do not sort hashed blocks.
(struct symbol): Add `hash_next' pointer.
* symtab.c (lookup_block_symbol): Search using the hash table when
possible.
(find_pc_sect_symtab): Use ALL_BLOCK_SYMBOLS.
(search_symbols, find_addr_symbol): Likewise.
* dstread.c (process_dst_block): Clear hashtable bit for new block.
(read_dst_symtab): Likewise.
* jv-lang.c (get_java_class_symtab): Likewise.
* mdebugread.c: Include "gdb_assert.h".
(shrink_block): Assert that the block being modified is not hashed.
* coffread.c (patch_opaque_types): Use ALL_BLOCK_SYMBOLS.
* symmisc.c (free_symtab_block): Walk the hash table when freeing
symbols.
(dump_symtab): Recognize hashed blocks.
* printcmd.c (print_frame_args): Assert that function blocks do not
have hashed symbol tables.
* ada-lang.c (symtab_for_sym): Use ALL_BLOCK_SYMBOLS.
(fill_in_ada_prototype, debug_print_block): Likewise.
(ada_add_block_symbols): Use ALL_BLOCK_SYMBOLS. Handle hash tables.
* symtab.c (remove_params): New function.
(make_symbol_overload_list): Use it instead of cplus_demangle.
(overload_list_add_symbol): Likewise. Reorder. Fix memory leak.
New variables.
(i386nbsd_init_abi): Use these to initialize tdep->sigtramp_start
and tdep->sigtramp_end.
* i386obsd-nat.c: New file.
* config/i386/obsd.mh (NATDEPFILES): Add i386obsd-nat.o.
* i386-nat.c (child_post_startup_inferior): New function
calling i386_cleanup_dregs if
I386_USE_GENERIC_WATCHPOINTS is defined.
* config/i386/nm-i386.h: define CHILD_POST_STARTUP_INFERIOR
conditional to acknowledge that i386-nat.c has its
own child_post_startup_inferior function.
* i386-tdep.c (i386_do_pop_frame): Use I386_MAX_REGISTER_SIZE
instead of MAX_REGISTER_RAW_SIZE.
(i386_extract_return_value, i386_extract_struct_value_address):
Convert to use regcache.
(i386_gdbarch_init): Set max_register_raw_size and
max_register_virtual_size to I386_MAX_REGISTER_SIZE.
Set extract_return_value and extract_struct_value_address instead
of their deprecated variants.
* i386-tdep.c: Include "symfile.h".
(i386_frameless_signal_p): Consider a function to be frameless if
the pc points at the first instruction of the function.
(i386_frame_chain): Handle (generic) call dummies.
(i386_frame_saved_pc): Likewise.
(i386_frame_init_saved_regs): Remove code dealing with call
dummies on the stack.
(i386_push_dummy_frame): Removed.
(i386_call_dummy_words): Removed.
(i386_fix_call_dummy): Removed.
(i386_push_return_address): New function.
(i386_do_pop_frame): Renamed from i386_pop_frame. Add FRAME
parameter, and don't call get_current_frame.
(i386_pop_frame): New function.
(i386_gdbarch_init): Set use_generic_dummy_frames to 1, set
call_dummy_location to AT_ENTRY_POINT, set call_dummy_address to
entry_point_address, set call_dummy_breakpoint_offset to 0, set
call_dummy_length to 0, set call_dummy_words to NULL, set
sizeof_call_dummy_words to 0, set fix_call_dummy to
generic_fix_call_dummy, set pc_in_call_dummy to
pc_in_call_dummy_at_entry_point, set push_dummy_frame to
generic_push_dummy_frame, set push_return_address to
i386_push_return_address and set frame_chain_valid to
generic_file_frame_chain_valid.
* gdbserver/linux-x86-64-low.c (x86_64_regmap): Make it an array of
byte offsets instead of an array of indexes.
(x86_64_store_gregset, x86_64_store_fpregset): Parameter made const.
(SP_REGNUM, FP_REGNUM, FUNCTION_START_OFFSET, DECR_PC_AFTER_BREAK)
(BREAKPOINT_FROM_PC, INNER_THAN, SAVED_PC_AFTER_CALL)
(INIT_EXTRA_FRAME_INFO, FRAME_INIT_SAVED_REGS, INIT_FRAME_PC)
(FRAME_CHAIN, FRAME_CHAIN_VALID, FRAME_SAVED_PC)
(STORE_RETURN_VALUE, DEPRECATED_EXTRACT_RETURN_VALUE)
(STORE_STRUCT_RETURN, DEPRECATED_EXTRACT_STRUCT_VALUE_ADDRESS)
(SKIP_PROLOGUE, FRAME_ARGS_SKIP, FRAME_ARGS_ADDRESS)
(FRAME_LOCALS_ADDRESS, FRAME_NUM_ARGS, POP_FRAME)
(PUSH_RETURN_ADDRESS, PUSH_DUMMY_FRAME, PUSH_ARGUMENTS): Remove.
* mcore-tdep.c (mcore_init_extra_frame_info): Add fromleaf
argument so the function fits the prototype in the architecture
vector.
(mcore_pop_frame): Remove argument so the function fits the
prototype. Use get_current_frame instead of the argument.
(mcore_push_arguments): Change type of struct_return so the
function can be used in the architecture vector.
(mcore_store_struct_return): Add.
(mcore_frame_init_saved_regs): Add.
(mcore_gdbarch_init): Add function calls to replace the macros
removed from tm-mcore.h
deprecated_grub_regcache_for_registers.
* values.c: Include "regcache.h".
(value_being_returned): Update. Use
deprecated_grub_regcache_for_registers to extract the register
buffer address.
* value.h (value_being_returned): Change ``retbuf'' parameter to a
``struct regcache''.
* Makefile.in (values.o): Add dependency on $(regcache_h).
* inferior.h (run_stack_dummy): Change type of second parameter to
a ``struct regcache''.
* valops.c (hand_function_call): Change type of retbuf to ``struct
regcache''. Allocate using regcache_xmalloc, clean using
make_cleanup_regcache_xfree.
* infcmd.c (run_stack_dummy): Update. Use
regcache_cpu_no_passthrough instead of memcpy to copy the buffer.
* regcache.c (do_regcache_xfree): New function.
(make_cleanup_regcache_xfree): New function.
* regcache.h (make_cleanup_regcache_xfree): Declare.
gdbadmin
Andrew Cagney
Mark Kettenis
Michael Snyder
Keith Seitz
Tom Tromey
Kevin Buettner
Stephane Carrez
Aidan Skinner
Don Howard
Grace Sainsbury
Corinna Vinschen
Theodore A. Roth
Joel Brobecker
Daniel Jacobowitz
Jim Blandy
Mark Salter
Michal Ludvig
Elena Zannoni
Joern Rennecke
Pierre Muller
Petr Sorfa
David O'Brien