a little more portable.
Don't use shell's echo command to put strings containing
escaped characeters into a file -- different flavors of /bin/sh
require differnt levels of escaping. Use cat <<EOF instead.
Our internal field separator is a colon. Change all
commands which assume it is a space.
(iterate_over_lwps): Make sure we can handle CALLBACK deleting the
LWP it's called for.
(lin_lwp_attach): Mark LWP as resumed to make sure the fake
SIGSTOP is reported.
(resume_clear_callback): New function.
(resume_set_callback): New function.
(lin_lwp_resume): Mark all LWP's that we're going to resume as
resumed, and unmark all others.
(status_callback): Only report a pending wait status if we pretend
that LP has been resumed.
(resumed_callback): New function.
(lin_lwp_wait): Add assertions to check that LWP's are properly
marked as resumed. Partially revert 2001-05-25 patch by Michael
Snyder: do not resume all threads. Add comment explaining the
problems associated with this bit of code.
* config/mips/irix6.mh: New file.
* config/mips/irix6.mt: New file.
* config/mips/xm-irix6.h: New file.
* config/mips/nm-irix6.h: New file.
* mips-tdep.c (mips_gdbarch_init) <MIPS_ABI_N32>: Set up the
disassembler info in tm_print_insn_info as appropriate for the N32
ABI. Force N32 ABI to be the default if the CPU is R8000 or
R10000.
* configure.tgt (mips*-sgi-irix6*): Map to irix6.
* configure.host (mips*-sgi-irix6*): Ditto.
* gdb.threads/pthreads.exp (check_control_c): Return 0 for success,
non-zero if control_c fails. Terminate the test on failure,
rather than wait for 12 more tests to time out.
stopped due to a Ctrl-C as well as breakpoints.
* hppa-tdep.c (hppa_prepare_to_proceed): Add FIXME as this may not
support thread switches after Ctrl-C.
* lin-lwp.c (lin_lwp_prepare_to_proceed): Ditto.
* linux-thread.c (linuxthreads_prepare_to_proceed): Ditto.
* m3-nat.c (mach3_prepare_to_proceed): Ditto.
instead of system-specific define's like _WIN32 and __MSDOS__.
Use IS_DIR_SEPARATOR and IS_ABSOLUTE_PATH instead of SLASH_P and
ROOTED_P.
(top-level): #include "filenames.h".
* solib.c (solib_open): Use IS_DIR_SEPARATOR and IS_ABSOLUTE_PATH
instead of SLASH_CHAR, ROOTED_P and SLASH_P.
(top-level): #include "filenames.h".
* defs.h (SLASH_P, SLASH_CHAR, ROOTED_P): Remove definitions.
(SLASH_STRING): Define only for _WIN32.
* completer.c: Use HAVE_DOS_BASED_FILE_SYSTEM instead of
__MSDOS_.
* cli/cli-cmds.c (cd_command): Use IS_DIR_SEPARATOR and
IS_ABSOLUTE_PATH instead of SLASH_P and ROOTED_P. Replace
system-specific ifdefs with HAVE_DOS_BASED_FILE_SYSTEM.
(top-level): #include "filenames.h".
* config/djgpp/fnchange.lst: Add two new files in the
gdb/testsuite/gdb.c++/ directory to the remapped names.
* config/djgpp/djconfig.sh (lt_cv_sys_max_cmd_len): Set to 12KB.
than requiring that all per-architecture data be registered before
the first gdbarch object is allocated.
* gdbarch.sh: Changes to effect the following:
* gdbarch.c (alloc_gdbarch_data, init_gdbarch_data): Delete
declarations and definitions.
(check_gdbarch_data): New function, and declaration.
(gdbarch_alloc): Don't call alloc_gdbarch_data; leaving the fields
zero is good enough.
(free_gdbarch_data): Tolerate a null data pointer. Free only
those data items gdbarch->data actually has allocated.
(set_gdbarch_data, gdbarch_data): Call check_gdbarch_data.
(gdbarch_update_p): No need to call init_gdbarch_data.
* thread.c (delete_step_resume_breakpoint): New function.
Maintain internal consistency of the thread list while deleting
a step_resume_breakpoint.
* gdbthread.h (delete_step_resume_breakpoint): Export.
* breakpoint.c (bpstat_find_step_resume_breakpoint):
Make thread-aware: don't return a step_resume_breakpoint
for the wrong thread.
* infrun.c (wait_for_inferior): Call delete_step_resume_breakpoint
instead of delete_breakpoint_current_contents.
(fetch_inferior_event): Ditto.
(handle_inferior_event): Call delete_step_resume_breakpoint
instead of delete_breakpoint.
* infrun.c (handle_inferior_event): After singlestepping over a
thread-specific breakpoint, use currently_stepping() to decide
whether to step or continue.
* lin-lwp.c (lin_lwp_attach_lwp): Call stop_wait_callback,
to consume the SIGSTOP generated by PTRACE_ATTACH.
(stop_wait_callback): If a SIGTRAP or a SIGINT event is consumed,
try again to get the SIGSTOP event.
(lin_lwp_wait): Resume all threads when ignoring a signal.
This will insure that newly attached threads get resumed.
* gdb.threads/linux-dp.exp: Remove assumptions about thread ordering.
Don't require that the main thread and the manager thread are the
first in the list.
* gdb.base/exprs.exp ("print unsigned short == (~0)"): Don't
assume that shorts are smaller than ints. On a 16-bit machine,
this isn't true.
("print unsigned char == (~0)"): Add test that verifies that ~0,
an int, is not equal to ~0 stored in an unsigned char. This tests
the same thing that the previous test meant to, but works on
16-bit machines, too.
("print unsigned char != (~0)"): Same test, complemented.
(gnu_pid_to_exec_file): Add PID parameter.
(set_sig_thread_cmd): Use PIDGET on return value from
thread_id_to_pid.
(proc_string): Use MERGEPID to construct argument to
pid_to_thread_id.
* gdb.threads/pthreads.exp (all_threads_running): Add an explicit
test for (full_coverage == 0). This makes the test run faster,
and prevents dejagnu getting out of step.
* gdb.base/callfuncs.exp: Make all test names unique.
* gdb.base/commands.exp: Make all test names unique.
* gdb.base/condbreak.exp: Make all test names unique.
* gdb.base/dbx.exp: Make all test names unique.
* gdb.base/default.exp: Make all test names unique.
* gdb.base/define.exp: Make all test names unique. Conform some FAIL
and TIMEOUT messages to their corresponding PASS message.
* gdb.base/ending-run.exp: Make all test names unique.
* gdb.base/long_long.exp: Remove duplicate test.
* thread-db.c: Allow for defunct zombie threads.
(attach_thread): Do not attempt to attach zombie thread.
(thread_db_thread_alive): Return false for defunct zombie thread.
(find_new_threads_callback): Don't add defunct zombie thread to list.
(Includes changes by Dan Berlin.)
* gnu-v3-abi.c: New file.
* minsyms.c: #include "value.h" and "cp-abi.h".
(install_minimal_symbols): Check the minimal symbol table for
symbols that look mangled in the V3 style, and select the V3 ABI
if we find any.
* Makefile.in (SFILES): Add gnu-v3-abi.c.
(COMMON_OBS): Add gnu-v3-abi.o.
(gnu-v3-abi.o): Add new rule.
(minsyms.o): Depend on $(cp_abi_h) and $(value_h).
Changes by Jim Ingham:
* values.c (value_change_enclosing_type): New function. If the
new enclosing type is larger than the old one, we need to allocate
more space.
* value.h: Add value_change_enclosing_type prototype.
* valops.c (value_cast): Use it.
(value_assign): Use it.
(value_addr): Use it.
(value_ind): Use it.
(value_full_object): Use it.
2001-05-07 Daniel Berlin <dan@cgsoftware.com>
* values.c (value_static_field): Handle static fields that have a constant value.
* remote.c (hex2bin): Make first argument const.
Require explicit count, don't accept null-terminated str.
(remote_resume, remote_async_resume): White space fix-up.
basename (NAME). The FreeBSD basename returns a pointer to a
static buffer, even if it's simply returning a string identical to
its argument.
(lookup_partial_symtab): Likewise.
Per Bothner
gdbadmin
Keith Seitz
Andrew Cagney
Jim Blandy
Mark Kettenis
Eli Zaretskii
Michael Snyder
Jonathan Larmour
Kevin Buettner
Michael Chastain
Christopher Faylor
Alexandre Oliva
Nicholas Duffek
Stephane Carrez
Daniel Berlin
Fernando Nasser
Elena Zannoni