* acconfig.h: Add HAVE_TKILL_SYSCALL definition check.
* config.in: Regenerated.
* configure.in: Add test for syscall function and check for
__NR_tkill macro in <syscall.h> to set HAVE_TKILL_SYSCALL.
* configure: Regenerated.
* lin-lwp.c [HAVE_TKILL_SYSCALL]: Include <unistd.h> and
<sys/syscall.h>.
(kill_lwp): New function that uses tkill syscall or
uses kill, depending on whether threading model is nptl or not.
All callers of kill() changed to use kill_lwp().
(lin_lwp_wait): Make special check when WIFEXITED occurs to
see if all threads have already exited in the nptl model.
(stop_and_resume_callback): New callback function used by the
lin_lwp_wait thread exit handling code.
(stop_wait_callback): Check for threads already having exited and
delete such threads fromt the lwp list when discovered.
(stop_callback): Don't assert retcode of kill call.
Roland McGrath <roland@redhat.com>
* i386-linux-nat.c (ps_get_thread_area): New function needed by
nptl libthread_db.
* configure.in (Makefile): Use the test ${target} != ${host},
instead of the absence of the "nm.h" file, to determine of the
configuration non-native.
* configure: Regenerate.
Check for monstartup and _mcleanup regardless of --enable-profiling.
* maint.c: Check for monstartup and _mcleanup before using them.
* config.in: Regenerated.
* configure: Regenerated.
2003-01-23 Alexander Larsson <alexl@redhat.com>
Jim Blandy <jimb@redhat.com>
Add support for executables whose debug info has been separated
out into a separate file, leaving only a link behind.
* objfiles.h (struct objfile): New fields: separate_debug_objfile
and separate_debug_objfile_backlink.
(put_objfile_before): New declaration.
* symfile.c: #include "filenames.h".
(symbol_file_add_with_addrs_or_offsets): If this objfile has its
debug info in a separate file, read that, too. Save the addrs
argument, so we can use it again to read the separated debug info;
syms_from_objfile modifies the table we pass it.
(reread_symbols): After re-reading an objfile, call
reread_separate_symbols to refresh its separate debug info
objfile, if it has one.
(reread_separate_symbols, find_separate_debug_file,
get_debug_link_info, separate_debug_file_exists): New functions.
(debug_file_directory): New global var.
(_initialize_symfile): Initialize debug_file_directory, and
provide the new `set debug-file-directory' command to let the user
change it.
* objfiles.c (free_objfile): If this objfile has its debug info in
a separate objfile, free that one too. If this is itself a
separate debug info objfile, clear our parent's backlink.
(put_objfile_before): New function.
* utils.c (gnu_debuglink_crc32): New function.
* defs.h (gnu_debuglink_crc32): New declaration.
* Makefile.in (symfile.o): Note dependency on "filenames.h".
* configure.in: Handle --with-separate-debug-dir config option.
* acinclude.m4 (AC_DEFINE_DIR): New macro.
* acconfig.h (DEBUGDIR): New macro.
* configure, aclocal.m4, config.in: Regenerated.
gdb/doc/ChangeLog:
2003-01-23 Jim Blandy <jimb@redhat.com>
* gdb.texinfo (Separate Debug Files): New section.
Jason Molenda <jmolenda@apple.com>.
* Makefile.in (PROFILE_CFLAGS): Substitute from configure.
(INTERNAL_LDFLAGS): Don't include PROFILE_CFLAGS.
* NEWS: Mention profiling.
* configure.in (--enable-gdbtk): Fix typo.
(--enable-profiling): New. Set PROFILE_CFLAGS.
* maint.c (maintenance_set_profile_cmd): Remove NOTYET.
Fill in function.
(profiling_state): New variable.
(mcleanup_wrapper): New function.
(_initialize_maint): Remove NOTYET, fix call to
add_setshow_boolean_cmd for "maint set profile".
* configure: Regenerated.
(config_h): Define.
(osabi.o): Update dependencies.
* configure.tgt: Set gdb_osabi based on target triplet.
* configure.in: Define GDB_OSABI_DEFAULT based on gdb_osabi.
* configure: Regenerated.
* config.in: Regenerated.
* osabi.c: Include "arch-utils.h", "gdbcmd.h", and "command.h".
(GDB_OSABI_DEFAULT): Define if not already defined.
(user_osabi_state, user_selected_osabi, gdb_osabi_available_names)
(set_osabi_string): New variables.
(gdbarch_register_osabi): Add new OS ABI to
gdb_osabi_available_names.
(gdbarch_lookup_osabi): Honor specified and default OS ABIs.
(set_osabi, show_osabi): New functions.
(_initialize_gdb_osabi): Add "set osabi" and "show osabi" commands.
AC_CHECK_FUNCS and remove the old check for pread64.
* acinclude.m4 (AC_GNU_SOURCE): New macro.
* acconfig.h (_GNU_SOURCE): Add.
(HAVE_PREAD64): Remove.
* configure, aclocal.m4, config.in: Regenerated.
directories using the AC_CONFIG_SUBDIRS macro instead. Polish
code providing the --enable-multi-ice option, and move it right in
front of the code that checks whether gdbserver is supported.
Polish that too.
* configure: Regenerated.
* Makefile.in (SUBDIRS): Substitute @subdirs@ instead of
@SUBDIRS@.
--without-included regex option, and move it into the "Checks for
library functions" section. This makes us use the system regex
again by default on systems with version 2 of the GNU C library.
This was apparently broken.
* gdb_regex.h [!USE_INCLUDED_REGEX] (_REGEX_RE_COMP): Define.
* acconfig.h (USE_INCLUDED_REGEX): Remove.
* config.in, configure: Regenerated.
* configure.in: Create "Checks for header files" section, and move
appropriate tests there. Don't check for objlist.h, wchar.h,
wctype.h and asm/debugreg.h. Rewrite Solaris 2.[78] <curses.h>
misdetection fix. Also add "Checks for types", "Checks for
compiler characteristics" and "Checks for library functions"
sections.
* config.in, configure: Regenerated.
the Autoconf manual.
* configure.in: Call AC_HEADER_DIRENT. Remove dirent.h,
sys/ndir.h, sys/dir.h and ndir.h from call to AC_CHECK_HEADERS.
* configure: Regenerated.
before enabling thread support on native AiX.
* configure: Regenerate.
* config/powerpc/aix432.mh (NATDEPFILES): Remove aix-thread.o
from the list of object files as it is now appended by configure
if thread support is enabled.
(NAT_CLIBS): Removed as -lpthdebug is also appended by configure
if thread support is enabled.
canonicalize_file_name Regenerated.
* config.in, configure: Regenerated.
* utils.c: (gdb_realpath) If HAVE_CANONICALIZE_FILE_NAME is
defined use canonicalize_file_name.
* configure.tgt: Configure gdbserver only for known working
targets. Set ${build_gdbserver} instead of modifying ${configdirs}.
* configure.in: Check ${build_gdbserver}. Put gdbserver/ into
SUBDIRS if it is configured. Update comment for ${nativefile}.
* configure: Regenerated.
* config.in: Regenerate.
* configure.in: Update copyright years.
Add test for PT_GETXMMREGS supplied by <sys/ptrace.h>.
* configure: Regenerate.
* i386bsd-nat.c: Update copyright years.
(fill_gregset): Use regcache_collect.
(fetch_inferior_registers): Only fetch integer registers
if requested to do so. Add support for XMM registers
using PT_GETXMMREGS.
(store_inferior_registers): Only store integer registers
if requested to do so. Add support for XMM registers
using PT_SETXMMREGS.
* i386nbsd-nat.c (fetch_inferior_registers): Remove.
(store_inferior_registers): Remove.
(fetch_core_registers): Use supply_gregset and i387_supply_fsave.
(fetch_elfcore_registers): New function.
(i386nbsd_elfcore_fns): New.
(_initialize_i386nbsd_nat): Register i386nbsd_elfcore_fns.
* config/i386/nbsd.mh (NATDEPFILES): Add i387-nat.o and
i386bsd-nat.o.
* config/i386/nbsdelf.mh (NATDEPFILES): Likewise.
* config/i386/nbsd.mt (TDEPFILES): Add i386bsd-nat.o.
* config/i386/nbsdelf.mt (TDEPFILES): Likewise.
* config/i386/tm-nbsd.h: Update copyright years.
(HAVE_SSE_REGS): Define.
(IN_SIGTRAMP): Define as i386bsd_in_sigtramp.
(SIGTRAMP_START): Redefine as i386bsd_sigtramp_start.
(SIGTRAMP_END): Redefine as i386bsd_sigtramp_end.
(SIGCONTEXT_PC_OFFSET): Remove.
(FRAME_SAVED_PC): Define as i386bsd_frame_saved_pc.
* configure.in: Check for realpath.
* defs.h (gdb_realpath): Declare.
* symtab.h (partial_symtab): Added fullname field.
* source.c (openp): Use gdb_realpath.
(forget_cached_source_info): Clear full name of each partial
symtab.
* utils.c (gdb_realpath): New function.
* symtab.c (lookup_symtab): Removed.
(lookup_symtab_1): Renamed to lookup_symtab.
(lookup_symtab): Look for real path.
(lookup_partial_symtab): Likewise.
gratuitious whitespace changes.
[!HAVE_SIGPROCMASK]: Call sigsetmask if HAVE_SIGSETMASK is defined.
* top.c: Remove redundant logic to define HAVE_SIGSETMASK.
(sigsetmask) Don't define macro.
(stop_sig) [HAVE_SIGPROCMASK]: Add bit of code snatched from
async_stop_sig from event-top.c.
[!HAVE_SIGPROCMASK]: Call sigsetmask if HAVE_SIGSETMASK is
defined.
* configure.in (AC_CHECK_FUNCS): Put functions in alphabetical
order. Add sigsetmask.
(AC_FUNC_VFORK, AC_FUNC_ALLOCA): Reorder such that they're in
alphabetical order.
* config/xm-aix4.h, config/alpha/xm-alphalinux.h,
config/i386/xm-cygwin.h, config/rs6000/xm-rs6000.h
(HAVE_SIGSETMASK): Remove.
* aclocal.m4, config.in, configure
give us the absolute path to the source directory.
* configure: Regenerated.
* Makefile.in (GDBTK_SRC_DIR): Add variable so that
autoconf can substitue it in for us.
(gdbtk.o): Pass in GDBTK_SRC_DIR instead of srcdir. We
really do need an absolute pathname.
(AC_FUNC_SETPGRP): Add.
* aclocal.m4, configure, config.in: Regenerated.
* inflow.c (gdb_setpgid): Get rid of NEED_POSIX_SETPGID and
SETPGRP_ARGS. Always use setpgid if it is available, fall back on
setpgrp if it isn't. Use SETPGRP_VOID (defined by autoconf) to
distinguish between the two setpgrp flavours.
* config/xm-sysv4.h, config/arm/xm-linux.h,
config/i386/xm-i386aix.h, config/i386/xm-sco.h,
config/i386/xm-linux.h, config/i386/xm-ptx.h,
config/m68k/xm-linux.h, config/powerpc/xm-linux.h,
config/sparc/xm-linux.h, config/sparc/xm-sun4sol2.h,
config/ia64/xm-linux.h (NEED_POSIX_SETPGID): Remove.
* config/rs6000/xm-rs6000.h (SETPGRP_ARGS): Remove.
* Makefile.in (UIOUT_CFLAGS): New macro. CFLAGS needed for uiout code
to be compiled. Defines UI_OUT.
(SUBDIR_MI_CFLAGS): Defines MI_OUT, not UI_OUT.
(INTERNAL_WARN_CFLAGS): Also include UIOUT_CFLAGS.
* configure.in (UIOUT_CFLAGS): New configuration variable.
(--with-uiout): New configuration option. Causes uiout code to
be compiled, instead of the old *printf one.
* configure: Regenerate.
* top.c (print_gdb_version): Test for and print MI_OUT, not UI_OUT.
* testsuite/lib/mi-support.exp (mi_gdb_start): Test for MI_OUT,
not UI_OUT.
* Makefile.in (CONFIG_LOBS): New macro. Configured to the files
that must be added to the gdblib itself.
(DEPFILES): Use CONFIG_LOBS, not CONFIG_OBS.
(INIT_FILES): Include CONFIG_OBS.
(gdb$(EXEEXT)): Depend on CONFIG_OBS and link with it.
(kdb): Ditto.
* configure.in (CONFIG_LOBS): New variable. Object files that must
be added to gdblib for the specific configuration.
* configure: Regenerate.
* Makefile.in (SUBDIR_GDBTK_OBS, SUBDIR_GDBTK_SRCS,
SUBDIR_GDBTK_DEPS, SUBDIR_GDBTK_INITS, SUBDIR_GDBTK_LDFLAGS,
SUBDIR_GDBTK_CFLAGS): New macros. For gdbtk subdir.
* configure.in: Fix typo. It is CONFIG_OBS not CONFIG_OJS.
Use the SUBDIR_GDBTK_* macros instead of hard coded file names.
* configure: Regenerate.
* configure.in: Fix a couple of typos in the handling of the
enable_gdbcli option. Make it check enableval for the result
of AC_ARG_ENABLE.
* configure: Regenerate.
* cli/cli-decode.c: New file. Handle lists of commands, their decoding
and documentation.
(add_cmd, deprecate_cmd, add_abbrev_cmd, add_alias_cmd, add_prefix_cmd,
add_abbrev_prefix_cmd, not_just_help_class_command, empty_sfunc,
add_set_cmd, add_set_enum_cmd, add_set_auto_boolean_cmd,
add_show_from_set, delete_cmd, apropos_cmd, help_cmd, help_list,
help_all, print_doc_line, help_cmd_list, find_cmd, lookup_cmd_1,
undef_cmd_error, lookup_cmd, deprecated_cmd_warning,
lookup_cmd_composition, complete_on_cmdlist, complete_on_enum):
Moved here from command.c.
(add_info, add_info_alias, add_com, add_com_alias): Moved here from
top.c.
* cli/cli-decode.h: Definitions/declarations for the above.
* cli/cli-cmds.c: New file. GDB CLI commands.
(error_no_arg, info_command, show_command, help_command, show_version,
quit_command, pwd_command, cd_command, echo_command, shell_escape,
make_command, show_user, set_debug, show_debug, init_cmd_lists):
Moved here from top.c.
(apropos_command): Moved here from command.c.
(complete_command, source_command): Moved here (part) from top.c.
(is_complete_command): New function. Checks if a command is the
"complete" command.
(init_cli_cmds): New function. Add commands to the CLI (from code
previously in top.c.
* cli/cli-cmds.h: Definitions/declarations for the above.
* cli/cli-script.c: New file. GDB CLI command scripting.
(build_command_line, get_command_line, print_command_lines,
print_command_line, execute_user_command, execute_control_command,
while_command, if_command, arg_cleanup, setup_user_args, locate_arg,
insert_args, realloc_body_list, read_next_line,
recurse_read_control_structure, read_command_lines, free_command_lines,
do_free_command_lines_cleanup, make_cleanup_free_command_lines,
validate_comname, user_defined_command, define_command,
document_command, source_cleanup_lines, do_fclose_cleanup,
show_user_1): Moved here from top.c.
(script_from_file): New function. Implements execution of a script
contained in a file (part of code for the source_command() that used
to exist in top.c).
* cli/cli-script.h: Definitions/declarations for the above.
* cli/cli-setshow.c: New file. Handle set and show GDB CLI commands.
(parse_auto_binary_operation, parse_binary_operation,
do_setshow_command, cmd_show_list): Moved here from command.c.
* cli/cli-setshow.h: Definitions/declarations for the above.
* top.c: Remove all CLI code, except the command loop.
(gdb_init): Call init_cli_cmds().
* command.c: Remove obsolete file.
* command.h: Mark as DEPRECATED.
* gdbcmd.h: Ditto.
* call-cmds.h: Ditto.
* Makefile.in (SFILES): Remove command.c.
(COMMON_OBS): Remove command.o.
(command.o): Remove obsolete target.
(cli_decode_h, cli_cmds_h, cli_script_h, cli_setshow_h): New macros.
Refer to CLI header files.
(cli-decode.o, cli-cmds.o, cli-setshow.o, cli-script.o): New targets.
(SUBDIR_CLI_OBS, SUBDIR_CLI_SRCS, SUBDIR_CLI_DEPS, SUBDIR_CLI_INITS,
SUBDIR_CLI_LDFLAGS, SUBDIR_CLI_CFLAGS, SUBDIR_CLI_ALL, SUBDIR_CLI_CLEAN,
SUBDIR_CLI_INSTALL, SUBDIR_CLI_UNINSTALL): New macros for new cli
subdirectory.
* configure.in (enable_gdbcli): New option. Include the CLI in the
executable (cannot be disabled yet).
(CONFIG_OBS, CONFIG_DEPS, CONFIG_SRCS, CONFIG_INITS, ENABLE_CFLAGS,
CONFIG_ALL, CONFIG_CLEAN, CONFIG_INSTALL, CONFIG_UNINSTALL): Add
the corresponding SUBDIR_CLI_* macros if CLI requested.
* configure: Regenerate.
* i386-linux-nat.c: Various doc fixes. Include "i387-nat.h".
(GETFPXREGS_SUPPLIES): Renamed from GETXFPREGS_SUPPLIES.
(have_ptrace_getfpxregs): Renamed from have_ptrace_getxfpregs.
(convert_to_gregset): Removed. Moved logic to ...
(fill_gregset): ... here. Simplified function.
(fetch_regs): Use perror_with_name for error reporting.
(store_regs): Add `regno' parameter. Use perror_with_name for
error reporting. Call fill_gregset instead of convert_to_gregset.
(FPREG_ADDR): Remove.
(supply_fpregset): Implement by calling i387_supply_fsave.
(convert_to_fpregset): Remove.
(fill_fpregset): Implement by calling i387_fill_fsave.
(fetch_fpregs): Use perror_with_name fro error reporting.
(store_fpregs) Add `regno' parameter. Use perror_with_name fro
error reporting. Call fill_fpregset instead of
convert_to_fpregset.
(supply_xfpregset, convert_to_xfpregset): Removed.
(supply_fpxregset, fill_fpxregset): New functions.
(fetch_fpxregs): Renamed from fetch_xfpregs. Use perror_with_name
for error reporting. Call supply_fpxregset instead of
supply_xfpregset.
(store_xfpregs): Removed.
(store_fpxregs): New function.
(fetch_inferior_registers): Adjust for xfp -> fpx change. Tweak
message in call to internal_error.
(store_inferior_registers): Adjust for xfp ->fpx change. Pass
REGNO to store_regs, store_fpregs and store_fpxregs.
(fetch_core_registers): Adjust for xfp -> fpx change.
* acconfig.h (HAVE_PTRACE_GETFPXREGS): Renamed from
HAVE_PTRACE_GETXFPREGS.
* config.in: Regenerated.
* configure.in: Replace check for PTRACE_GETXFPREGS with check for
PTRACE_GETFPXREGS. Remove comment about Cygnus SSE extensions.
* configure: Regenerated.
* config/i386/linux.mh (NATDEPFILES): Add i387-nat.o.
* config/i386/tm-linux.h: Base definition of HAVE_SSE_REGS on
HAVE_PTRACE_GETFPXREGS instead of HAVE_PTRACE_GETXFPREGS.
(handle_load_dll): Change DLL name to lower case.
(handle_exception): Add a second argument indicating whether a breakpoint
should be ignored. Return a 0 if the breakpoint was ignored.
(get_child_debug_event): Pass argument to handle_exception to control whether a
breakpoint should be ignored.
(child_create_inferior): Use modern cygwin API. Explicitly clear last_sig.
Pass FIRST_EXCEPTION to get_child_debug_event for detection of first
breakpoint.
* configure.in: Eliminate unneeded WINDRES/DLLTOOL tests left over after last change.
* configure: Regenerate.
* acconfig.h (HAVE_PRGREGSET_T, HAVE_PRFPREGSET_T, HAVE_LWPID_T,
HAVE_PSADDR_T): Add them here instead of in config.in.
* acconfig.h (PRFPREGSET_T_BROKEN): New define.
* configure.in: Add check for broken prfpregset_t type.
* lin-thread.c (gdb_prfpregset): New typedef, depends on
definition of PRFPREGSET_T_BROKEN.
(ps_lgetfpregs, ps_lsetfpregs, p_td_thr_getfpregs,
p_td_thr_setfpregs, thread_db_fetch_registers,
thread_db_store_registers): Use gdb_prfpregset_t instead of
prfpregset_t.
* config.in: Regenerated.
* configure: Regenerated.
(NEW_PROC_API): Define on Solaris 7 and 8 as well as 6.
* acconfig.h (_MSE_INT_H): Define on Solaris 7.
* configure: Regenerate.
* config.in: Regenerate.
Make cross-compilation for the Hurd more friendly.
From Jeff Bailey <jbailey@gnu.org>:
* configure.in: Use AC_CHECK_TOOL to find MiG.
* Makefile.in (MIG): New variable.
* config/i386/i386gnu.mh (MIG): Remove.
* configure: Regenerated.
* configure.in: Remove the addition of sol-thread.c to the
CONFIG_INITS list. This caused problems with init.c, because
sol-thread.c would be grepped twice for _initialize_* functions.
* configure: Ditto.
* Makefile.in: Add FIXME for init.c.
* gnu-regex.c: Check ENABLE_NLS instead of HAVE_LIBINTL_H.
* configure.in: Don't check for libintl.h.
* configure, config.in: Regenerated.
Fixes a problem on debian systems, a conflict between the
/usr/include/libintl.h and the routines that are actually linked in,
up in ../intl.
* Makefile.in: Add GDBTK_CFLAGS - this is now used to hold
-fwritable-strings when compiling with Tk8.1.
* configure.in: Add GDBTK_CFLAGS, set it to -fwritable-strings for
Tcl/Tk8.1 & greater.
* acinclude.m4: Move the rest of the defines to find Itcl, Itk &
Tix from aclocal.m4 to here.
* aclocal.m4: regenerate.
* configure: regenerate.
* gdbtk-hooks.c (x_event): Tcl_ObjGetVar2 was removed from
Tcl8.1. Use Tcl_GetVar2 instead.
* gdbtk-hooks.c (gdbtk_trace_find): Fix up call to
Tcl_GlobalEvalObj for Tcl/Tk 8.1.
* gdbtk-hooks.c (gdbtk_trace_start_stop): Call to Tcl_EvalObj was
inefficient, replace with call to Tcl_GlobalEval.
* gdbtk.c: Don't swap out the Tcl_Alloc calls in gdbtk.c. We took
care of that in Tcl itself for 8.1.
* gdbtk.c: Remove const from the script string since Tcl8.1 has
taken to scribbling sentinals into strings passed to it again...
* gdbtk-cmds.c (wrapped_call): Change declaration of 1st arg from
char * to PTR to eliminate warning.
* gdbtk-cmds.c (perror_with_name_wrapper): Ditto
at run-time. At the moment, the only thing this affects is the
set of registers visible.
* config/rs6000/tm-rs6000.h (REGISTER_NAME): Define this as a call
to the function rs6000_register_name.
(rs6000_register_name): Include extern decl.
(NUM_REGS): Bump to 183. What's the right way to do this?
(FIRST_UISA_SP_REGNUM, LAST_UISA_SP_REGNUM): Renamed from
FIRST_SP_REGNUM, LAST_SP_REGNUM.
(REGISTER_BYTES): Recompute this.
* rs6000-tdep.c: Renamed all uses of FIRST_SP_REGNUM and
LAST_SP_REGNUM to FIRST_UISA_SP_REGNUM and LAST_UISA_SP_REGNUM, with
some concomitant formatting changes.
#include "gdbcmd.h", so we can define commands here.
(struct variant): New structure.
(COMMON_UISA_REG_NAMES, PPC_UISA_SPR_NAMES, PPC_SEGMENT_REG_NAMES,
PPC_32_OEA_SPR_NAMES, num_registers): New macros.
(register_names_rs6000, register_names_uisa, register_names_403,
register_names_403GC, register_names_505, register_names_860,
register_names_601, register_names_602, register_names_603,
register_names_604, register_names_750, variants): New variables.
(rs6000_register_name, install_variant, find_variant_by_name,
install_variant_by_name, list_variants, show_current_variant,
set_processor, show_processor): New functions.
(_initialize_rs6000_tdep): Define new commands `set processor' and
`show processor', and call install_variant_by_name to set the
default variant.
* rs6000-nat.c: Renamed all uses of FIRST_SP_REGNUM and
LAST_SP_REGNUM to FIRST_UISA_SP_REGNUM and LAST_UISA_SP_REGNUM, with
some concomitant formatting changes.
* configure.in: Accept the `--with-cpu' flag, to specify a default
processor variant.
* acconfig.h: Provide a blurb for TARGET_CPU_DEFAULT, which is set
by configure's `--with-cpu' flag.
* config.in, configure: Regenerated.
* acinclude.m4: New file, containing the hand-written local macro
definitions that used to be in aclocal.m4. Don't sinclude
../bfd/aclocal.m4 any more; running aclocal in this directory will
get us the definitions we need. HOWEVER: Do sinclude
../bfd/acinclude.m4, because we need the definition of
BFD_NEED_DECLARATION.
* aclocal.m4: Regenerated by aclocal.
* configure: Regenerated by autoconf.
* utils.c: <readline/readline.h> instead of "readline/readline.h".
* configure.in (TERM_LIB): Search for the appropriate term library
on the host system.
* configure: Regenerated.
* Makefile.in (TERMCAP): Set based on autoconf check.
* config/*/*.mh: Don't override TERMCAP setting.
* configure.in (with-sim-gpu2): Do not emit a -L argument without
an associated pathname. Link in the math library after the gpu2
library.
Assumes that libm is around (and doesn't take advantage of the
AC_CHECK_LIB(m) that is already in configure.in), but this is a
minor point and unlikely to cause problems.
Changes to account for name change from cygwin32 to cygwin and
clean up Win32-related ifdefs.
* configure.tgt: check for cygwin* instead of cygwin32.
New cygwin gdb_target variable loses the "32".
* configure.host: check for cygwin* instead of cygwin32.
New cygwin gdb_host variable loses the "32".
* configure.in: test __CYGWIN__ instead of __CYGWIN32__,
rename gdb_cv_os_cygwin32 variable to drop the "32". Call
AM_EXEEXT instead of AC_EXEEXT since that isn't in a released
autoconf yet.
* configure: regenerate.
* main.c: drop "32" from cygwin_ funcs, include sys/cygwin.h
where
cygwin path conv protos live, instead of adding a proto here
for
them here.
* {main.c, ser-tcp.c, ser-unix.c, top.c}: check __CYGWIN__
instead of __CYGWIN32__.
* source.c: thoughout, check _WIN32 instead of WIN32.
* config/i386/cygwin32.mh: delete.
* config/i386/cygwin.mh: new file, was cygwin32.mh.
* config/i386/cygwin32.mt: delete.
* config/i386/cygwin.mt: new file, was cygwin32.mt.
* config/i386/tm-cygwin32.h: delete.
* config/i386/tm-cygwin.h: new file, was tm-cygwin32.h.
* config/i386/xm-cygwin32.h: delete.
* config/i386/xm-cygwin.h: new file, was xm-cygwin32.h.
* config/i386/xm-windows.h: #include xm-cygwin.h now.
* config/powerpc/cygwin32.mh: delete.
* config/powerpc/cygwin.mh: new file, was cygwin32.mh.
* config/powerpc/cygwin32.mt: delete.
* config/powerpc/cygwin.mt: new file, was cygwin32.mt.
* config/powerpc/tm-cygwin32.h: delete.
* config/powerpc/tm-cygwin.h: new file, was tm-cygwin32.h.
* config/powerpc/xm-cygwin32.h: delete.
* config/powerpc/xm-cygwin.h: new file, was xm-cygwin32.h.
* rdi-share/aclocal.m4: regenerate with aclocal.
* rdi-share/configure: regenerate with autoconf.
* rdi-share/{host.h, hostchan.c, hostchan.h, serdrv.c,
* serpardr.c,
unixcomm.c}: check __CYGWIN__ instead of __CYGWIN32__.
* patch approved by shebs
Wed Oct 28 12:33:52 EST 1998 Frank Ch. Eigler <fche@cygnus.com>
* configure.in: Accept both -skyb- and -sky- for
--with-sim-funit/gpu2 options.
* configure: Rebuilt.
* configure.in (AM_EXEEXT): Use AC_EXEEXT instead.
* configure: Regenerated.
Geoff just removed the AM_EXEEXT definition from ../binutils/aclocal.m4
so we would have been hosed in the near future.
* defs.h: Move _initialize_printcmd, _initialize_stack,
_initialize_blockframe out of here and in to their respective .c files.
* blockframe.c: Move _initialize_blockframe prototype to here.
* printcmd.c: Move _initialize_printcmd prototype to here.
* stack.c: Move _initialize_stack prototype to here.
* source.c, symtab.h: Move _initialize_source prototype to the .c file.
* values.c, value.h: Move _initialize_values prototype to the .c file.
* gdbthread.h, thread.c: Move _initialize_thread prototype to the .c
file.
* breakpoint.c, breakpoint.h: Move _initialize_breakpoint prototype
to the .c file.
* abug-rom.c alpha-nat.c alpha-tdep.c annotate.c ax-gdb.c bcache.c:
Standardize comments for the prototype section of these files.
* configure.in: Look in libc for wctype before looking for it in libc.
The last one is to fix the GNU ld (~2.9.1) + Solaris 2.6 interaction problem
where an empty stub library (libw) causes a core dump when we call vasprintf
(e.g. `info br') in the final linked gdb.
version didn't work for sol2.6; pushed it to autoconf.
* configure.in (gdb_cv_proc_service_is_old): new test.
* acconfig.h (PROC_SERVICE_IS_OLD): new define.
* configure, config.in: regenerate.
* configure.in: Check for sys/debugreg.h, asm/debugreg.h.
* i386v-nat.c: Include asm/debugreg.h, sys/debugreg.h if it is not
present.
This is to work around a conflict where the Linux 2.1.x kernel and glibc
2.0.x are not in sync; including <sys/debugreg.h> will result in an error.
With luck, these losers will get their act together and we can trash
this hack in the near future.
* configure.in: Add --enable-warnings.
Adjust whitespace of other --with and --enable options so that
configure --help lines up correctly.
* aclocal.m4: Ditto.
* Makefile.in (WARN_CFLAGS): Add. Set by configure.
* configure: Regenerated.
* configure.in: Add more header files to AC_CHECK_HEADERS.
* configure: Regenerated.
* command.c: Include wait.h or sys/wait.h if present.
* inftarg.c: Ditto.
* core-aout.c: Include ptrace.h or sys/ptrace.h if present, based
on autoconf test.
* infptrace.c: Ditto.
* expprint.c: Include ctype.h for isprint prototype.
* i386aix-nat.c: Include sys/reg.h if autoconf says it is present.
* i386v-nat.c: Include ptrace.h, sys/ptrace.h, and sys/reg.h if
present, based on autoconf test.
* utils.c: Include curses.h and term.h if present.
(puts_debug): Change 'carriage_return' local variable to return_p
to avoid name clash.
* config/m68k/nm-apollo68b.h: Don't define PTRACE_IN_WRONG_PLACE,
determine it with autoconf.
* config/i386/nm-linux.h: Don't define NO_SYS_REG_H, determine it
with autoconf.
* config/i386/nm-i386sco.h: Don't define NO_PTRACE_H, determine it
with autoconf.
* config/i386/nm-i386v.h: Ditto.
* config/i386/nm-symmetry.h: Ditto.
* config/m88k/xm-cxux.h: Ditto.
* config/m88k/xm-dgux.h: Ditto.
* config/m68k/delta68.mh (NAT_FILE): nm-delta68.h no longer necessary.
* config/m68k/nm-delta68.h: Removed.
* Moved gdbtk_hooks.c & gdbtk_cmds.c to gdbtk-hooks.c &
gdbtk-cmds.c to comply with the gdb conventions. Changed the
configure & makefile to reflect the change...
* main.tcl (gdbtk_preloop): Call gdbtk_idle on spec. If there was an
error in loading an executible specified on the command line,
then the pre_add_symbol hook would have called gdbtk_busy but
the corresponding call to gdbtk_idle would not have occured.
Also changed some catch calls so they didn't use
"catch {set foo [real_command]}"
but rather the more efficient:
"catch {real_command} foo"
* register.tcl: more catch cleanups
* src.tcl: more catch cleanups
* stack.tcl: more catch cleanups
* target.tcl: more catch cleanups
* tdump.tcl: more catch cleanups
* variables.tcl: more catch cleanups
* watch.tcl: more catch cleanups
* gdbtk.c (gdbtk_init): Fixed a bug in the startup code on Windows
that caused gdbtk not to find the share directory unless
GDBTK_LIBRARY was set.
* gdbtk.c: removed all the commands and hooks from this file so
now it contains only the startup code.
* gdbtk_cmds.c: New file - this contains all the Tcl commands that
gdb defines. All the old commands were moved here, the
string-based commands were converted to object commands, and the
object-based commands were all converted to uniformly use the
call_wrapper. A new function, Gdbtk_Init was added to centralize
initializing the gdb package. Also added gdbtk as a package
into gdbtk_interp.
* gdbtk_hooks.c: New file - All the hooks were moved here, and a new
function, gdbtk_add_hooks was added to centralize adding all these
hook functions. gdbtk_fputs was also modified to handle the new
result_ptr structure. See the comments in gdbtk.h for more
details.
* gdbtk.h: New file - this contains all the defines and globals
shared by gdbtk.c, gdbtk_cmds.c & gdbtk_hooks.c
* Makefile.in, configure.in & configure: mutatis mutandi for the
new files.
* btowc.c: Removed.
* configure.in: Don't see if we need to replace btowc().
* Makefile.in: Don't include LIBOBJS.
* configure: Regenerated.
* gnu-regex.c (regex_compile): Only support i18n [:foo:] if
we have btowc().
* configure.in: Add some tests for gnu-regex.c's benefit.
See if btowc() function is provided in C library.
* configure, config.in: Regenerated.
* Makefile.in (CLIBS, CDEPS): Add @LIBOBJS@ to build btowc.c
if necessary.
* btowc.c: New file.
* gnu-regex.c: Reorder wchar.h and wctype.h includes for Solaris'
benefit.
Drop namespace preserving defines for now.
* gdbtk.c (_initialize_gdbtk): Get rid of the console. Patch from
Chris Faylor (cgf@cygnus.com).
* configure.in: Link cygwin32 with subsystem console.
* configure: Regenerated
(INSTALLED_LIBS): Include GDBTKLIBS.
(CLIBS): Likewise.
* configure: Rebuilt.
* configure.in: Put Tcl/Tk libs into GDBTKLIBS, not LIBS.
(GDBTKLIBS): AC_SUBST.
* configure.in (strerror): Check if function must be declared.
* acconfig.h (NEED_DECLARATION_STRERROR): New define slot.
* gdb_string.h (strerror): Function declaration issued if
NEED_DECLARATION_STRERROR.
* configure, config.in : Files regenerated.
merged changes from Foundry (list follows by file/author):
- Tom Tromey <tromey@cygnus.com>
* Makefile.in (gdbres.o): New target.
(WINDRES): New define.
* configure: Rebuilt.
* configure.in (WINDRES): Define.
(CONFIG_OBS): Include gdbres.o on Windows.
* gdbtool.ico: New file.
* gdb.rc: New file.
* ser-unix.c
- Keith Seitz <keiths@onions.cygnus.com>
(wait_for): Don't reset the timeout_remaining for CYGWIN32,
since we now effectively poll the serial port.
Don't reset the current_timeout, either, since this member is used
by hardwire_readchar to track the timeout and call the ui_loop_hook.
(hardwire_readchar): Poll the serial port for Cygwin32. We timeout every
second, update the UI, and loop around doing this until we have hit the real
timeout or we get data or an error. This will allow the UI to stay active
while gdb is "blocked" talking to the target.
- Martin M. Hunt <hunt@cygnus.com>
(wait_for): Do reset current_timeout
because it is only used to keep track of what the
current timeout for the scb is.
* top.c
- Martin M. Hunt <hunt@cygnus.com>
(quit_confirm): Change exit message again
for GUI.
(pc_changed_hook): Add prototype.
- Tom Tromey <tromey@cygnus.com>
(quit_confirm): Added missing `else'.
(quit_confirm): Special-case message if init_ui_hook is
set.
* symtab.c
- Martin M. Hunt <hunt@cygnus.com>
(find_pc_sect_line): If no symbol information
is found, return correct pc anyway.
(find_methods): Comment out an apparently
bogus error message because it messes up Foundry.
* serial.c
- Martin M. Hunt <hunt@cygnus.com>
(_initialize_serial): Add a description of
"set remotelogbase".
* findvar.c
- Martin M. Hunt <hunt@cygnus.com>
(write_register_gen): Add call to
pc_changed_hook if the PC is being changed.
* defs.h
- Martin M. Hunt <hunt@cygnus.com>
(pc_changed_hook): Define.
* command.c
- Martin M. Hunt <hunt@cygnus.com>
(do_setshow_command): If no arguments are supplied,
don't dump core, instead print out an error message.
* breakpoint.c
- Martin M. Hunt <hunt@cygnus.com>
Make set_raw_breakpoint, set_breakpoint_count,
and breakpoint_count non-static so they are accessible from
gdbtk.c.
(enable_breakpoint): Enable breakpoint
with same disposition instead of changing all breakpoints
to donttouch.
* annotate.h
- Keith Seitz <keiths@onions.cygnus.com>
Add declarations for annotation hooks.
* annotate.c
- Keith Seitz <keiths@onions.cygnus.com>
Add hooks: annotate_starting_hook, annotate_stopped_hook,
annotate_signalled_hook, annotate_exited_hook.
(annotate_starting): If hook exists, call it instead.
(annotate_stopped): If hook exists, call it instead.
(annotate_exited): If hook exists, call it instead.
(annotate_signalled): If hook exists, call it instead.
Sat Mar 21 19:34:49 1998 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
Merged changes from Foundry: list follows by author:
- Tom Tromey <tromey@cygnus.com>
* Makefile.in (gdbres.o): New target.
(WINDRES): New define.
* configure: Rebuilt.
* configure.in (WINDRES): Define.
(CONFIG_OBS): Include gdbres.o on Windows.
* gdbtool.ico: New file.
* gdb.rc: New file.
* gdbtk.c (gdbtk_init): Call ide_create_messagebox_command.
(gdbtk_cleanup): Call ide_interface_deregister_all.
(gdbtk_init): Pass event handle to cleanup.
(TclDebug): Use Tcl_Merge to construct command.
(gdbtk_init): Call ide_create_cygwin_path_command.
- Martin M. Hunt <hunt@cygnus.com>
* gdbtk.c (gdb_set_bp): Set addr_string for bp.
(gdb_get_breakpoint_info): Demangle function
names in breakpoint info.
Include "demangle.h".
(gdb_loc, gdb_listfuncs): Demangle C++
function names.
(gdb_set_bp): Properly quote filename to fix
problems with spaces. Send pc back as a hex string.
(gdb_listfuncs): Remove debugging line.
Turn off some debugging lines.
(breakpoint_notify): Return correct line number.
(gdb_get_breakpoint_info): Return correct line number.
(gdb_set_bp): New function to provide a better way to
set breakpoints.
(gdbtk_readline, gdbtk_readline_begin): Memory
allocated by tcl needs to be freed by Tcl_Free().
(find_file_in_dir): Deleted.
(gdb_find_file_command): Call full_lookup_symtab().
(gdb_listfuncs): Call full_lookup_symtab().
(full_lookup_symtab): New function. Like lookup_symtab
except handles multiple files with the same basename,
full pathnames, and always sets symtab->fullname.
(gdb_loadfile): Call full_lookup_symtab(). Clear
realloc'd memory.
(gdb_loadfile): Don't tag lines without source.
Tag source lines with source_tag.
(gdb_find_file_command, find_file_in_dir):
Rewrite. Now searches symtabs and psymtabs for a match
on the partial or full filename. Returns the full pathname.
(gdb_loadfile): Realloc additional memory
if someone loads in a file with more than 160,000
lines. I don't know if this really works because
I don't have enough memory to test it.
(gdb_sourcelines): Deleted.
(gdb_loadfile): New function. Takes a text widget
and loads it with the contents of a file. Marks
and tags source lines.
(pc_changed): New function.
(get_pc_register): Returns the value of
the PC to GDB.
(gdb_loc): If looking on the stack, return
real pc along with calling source line.
(gdb_loc): Return "" instead of "N/A" if
filename is not found.
(gdb_get_breakpoint_info): Same.
(get_register): For Natural mode, set format to 0.
Minor bugfixes from keiths.
(TclDebug): New function for debugging use.
(gdb_loc): Return correct PC for frames
that are not the innermost frame.
(gdb_listfiles): Rewritten to use object
API. Now takes an optional dirname which will cause
only files in that directory or its subdirectories
to be returned. Now returns basenames instead of
full pathnames.
(gdb_cmd): Set/reset load_in_progress flag.
(call_wrapper): Don't pop up dialog for errors in
downloads; just abort download.
(gdbtk_load_hash): Set return value correctly.
- Keith Seitz <keiths@onions.cygnus.com>
* gdbtk.c (gdbtk_init): Define the ui_loop_hook so that it can be
called by routines which might block, allowing us to update the GUI.
(gdbtk_wait): Move timer calls to annotation hooks.
(gdbtk_init): Define the annotation hooks.
(gdbtk_annotate_starting): New function for cygwin32 hosts.
(gdbtk_annotate_stopped): New function for cygwin32 hosts.
(gdbtk_annotate_exited): New function for cygwin32 hosts.
(gdbtk_annotate_signalled): New function. for cygwin32 hosts.
(gdbtk_init): Use gdbtk_print_frame_info hook.
(gdbtk_print_frame_info): New function which sets current_source_symtab
based on the given symtab and line info.
(gdb_immediate_command): New function which does
not buffer any
output. (Contrast to gdb_cmd.)
(gdb_prompt_command): New function to return gdb's prompt.
(find_file_in_dir): New functon which searches source paths
for a given filename.
(gdb_find_file): New function which returns path to given file -- uses
find_file_in_dir.
(gdbtk_init): Install "gdb_immediate", "gdb_find_file", and
"gdb_prompt"
commands into interpreter.
- Ian Lance Taylor <ian@cygnus.com>
* gdbtk.c (gdbtk_timer_going): If __CYGWIN32__, new static
variable.
(gdb_cmd): If __CYGWIN32__, if executing the load command, call
gdbtk_start_timer and gdbtk_stop_timer.
(call_wrapper): If __CYGWIN32__, if the timer is going, turn it
off. Clear load_in_progress.
(x_event): If load_in_progress, quit if download_cancel_ok.
(gdbtk_start_timer): Set gdbtk_timer_going.
(gdbtk_stop_timer): Clear gdbtk_timer_going.
(gdbtk_wait): Call x_event.
(gdbtk_init): Call ide_create_win_grab_command if
__CYGIN32__.
(gdb_clear_file): Clear stop_pc.
* acconfig.h: FORCE_MMCHECK changed to MMCHECK_FORCE.
* configure.in: Ditto.
* configure: Regenerated.
Tue Feb 17 14:07:34 1998 Peter Schauer <pes@regent.e-technik.tu-muenchen.de>
* gdbtypes.c (check_typedef): Do not try to resolve the length of
a type which has TYPE_FLAG_TARGET_STUB set, if the target type has
set TYPE_FLAG_TARGET_STUB as well.
Patches from Peter.
and "post_add_symbol_hook". These hooks are called before we begin reading
symbols, and after we finish.
(generic_load): Use new symbol reading hooks and get rid of compiler warning.
* gdbtk.c (gdbtk_init): Add hooks for pre- and post-symbol reading.
(gdbtk_pre_add_symbol): New function: the pre-add-symbol hook.
(gdbtk_post_add_symbol): New function: the post-add-symbol hook.
(find_file_in_dir): New function. Moved the guts of gdb_find_file_command
into here to allow its use by others.
(gdb_loc): Use find_file_in_dir to return the real path to the file
(or "N/A" if we can't find it).
* configure.in (TIX_LIB_EXT): Define new variable for those special cases
when TCL_SHLIB_SUFFIX is not enough to specify the dependency.
* configure: Regenerate.
use TCL_SHLIB_SUFFIX to specify the suffix of the library file so that
we don't expect to see "libfoo.a" instead of "libfoo.{so,sl, etc}".
* configure: Regenerate.
In dwarf2read.c, if the ABI is 32 bit and 64 bit addresses are encountered
discard the most significant 32 bits.
Use CORE_ADDR for address variables instead of long.
Add more explicit tx49 configur target.
Check/use sigaction/SA_RESTART in remote-sim.c
(gdbtk_init): move ide_initialize_paths out of IDE ifdef
* configure.in (TCL_LIBS, CONFIG_DEPS): add IDE libraries for all
builds
(CONFIG_OBS): remove tracepoint.o, which should always be included
* configure: regenerate
* Makefile.in (install-only): ALWAYS install the new gdbtk
(REMOTE_OBS): add tracepoint.o
the directory name
* Merge (lots) with foundry-971118-build
* Makefile.in (install-only): install the new gdbtk, not the old
* top.h: add declaration of get_prompt
* top.c (get_prompt): new function
* gdbtk.c (gdbtk_call_command): also run idle hooks for class_trace
commands
(gdbtk_init): add new commands "gdb_get_locals", "gdb_get_args",
"gdb_get_function", "gdb_get_line", "gdb_get_file",
"gdb_tracepoint_exists", "gdb_get_tracepoint_info", "gdb_actions",
and "gdb_prompt"
(gdb_get_vars_command): new function
(gdb_get_line_command): new function
(gdb_get_file_command): new function
(gdb_get_function_command): new function
(gdb_get_tracepoint_info): new function
(gdbtk_create_tracepoint): new function
(gdbtk_delete_tracepoint): new function
(tracepoint_notify): new function
(tracepoint_exists): new function
(gdb_actions_command): new function
(gdb_tracepoint_exists_command): new function
(gdb_prompt_command): new function
* main.tcl: initialize gdbtk_state(readline)
* console.tcl (invoke): get realine working
(activate): add prompt argument for readline
(setprompt): add prompt argument for readline
* interface.tcl (gdbtk_tcl_readline): hack to get readline working
* lots: Merge with foundry-971118-build
* console.tcl (setprompt): get prompt from gdb
* prefs.tcl (pref_set_defaults): add tracepoint defaults
* interface.tcl (gdbtk_tcl_tracepoint): new function
* src.tcl (constructor): set default behavior of left click, make
a tracepoint dot, too
(fill_files): "new" function: ripped out of "location"
(location): use fill_files instead
(do_bp): add support for tracepoints
(bp_line): add support for tracepoints
(set_tracepoint): new function
(config_win): add "Set tracepoint here" to right-click menu
* actiondlg.tcl: new file to help with tracepoint data collection actions
* tracedlg.tcl: new file to help with tracepoints
To configure.in: make PRINTF_HAS_LONG_LONG check more pedantic; check
that SCANF_HAS_LONG_DOUBLE instead of assuming PRINTF_HAS_LONG_DOUBLE
implies it; document.
* aclocal.m4: add EXEEXT setting rule
* configure.in: call it
* configure: regenerate
* Makefile.in: pepper with EXEEXTs in appropriate places,
set SHELL = @SHELL@ for those lame hosts that don't have a /bin/sh
* Makefile.in: add DLLTOOL = @DLLTOOL@, pass on DLLTOOL to
sub makes, change clean rule to also remove *.a to remove
libwigglers.a, in dependencies: add ppc-bdm.o ocd.o ser-ocd.o and
remove remote-wiggler.o
* configure.in: add DLLTOOL support
* configure: regenerate
* wigglers.def: new file for imports for wigglers.dll
* ser-ocd.c: new file which is layer between ocd.c and either the
wigglers.dll or the target box, only stub so far
* config/powerpc/ppc-eabi.mt: add ppc-bdm.o to TDEPFILES
* config/powerpc/ppc-sim.mt: add ppc-bdm.o to TDEPFILES
* config/i386/cygwin32.mh: add ocd.o ser-ocd.o libwigglers.a
to XDEPFILES, add rules to build libwigglers.a
checking in changes of Stu Grossman <grossman@cygnus.com>:
* remote-wiggler.c: delete
* ocd.c: new, was remote-wiggler.c
always include sys/types.h, include ocd.h, move WIGGLER
commands and many wiggler prototypes to ocd.h, make wiggler_desc
static, stop making local wiggler functions static,
define write_mem_command for wiggler_write_bytes
(wiggler_start_remote): stop hardcoding the target type,
instead set and use a target_type variable.
(wiggler_open): add new target_type and ops args
(wiggler_wait): now no longer takes pid and target_status as args,
stop trying to set target_status struct, remove BGND insn
checks
(read_bdm_registers): renamed to wiggler_read_bdm_registers
(wiggler_read_bdm_registers): numregs arg changed to reglen arg,
remove pktlen check, set reglen instead of numregs
(dump_all_bdm_regs): delete
(wiggler_fetch_registers): delete
(wiggler_prepare_to_store): now just an empty function
(wiggler_store_registers): delete
(wiggler_read_bdm_register): new
(wiggler_write_bdm_registers): new
(wiggler_write_bdm_register): new
(wiggler_write_bytes): use write_mem_command variable instead of
WIGGLER_WRITE_MEM
(get_packet): renamed to wiggler_get_packet, change refs throughout
(put_packet): renamed to wiggler_put_packet, change refs throughout
(wiggler_get_packet): add break to default case of switch,
change length of WIGGLER_GET_VERSION len to 10 from 4 to match
specs
(wiggler_mourn): unpush_target with current_ops, not &wiggler_ops
(flash_xfer_memory): delete
(noop_store_registers): new placeholder replacement for
target_store_registers() which prevents generic_load from trying to
set up the PC.
(bdm_update_flash_command): add store_registers_tmp variable,
make handling of wiggler_ops more generic -- define wiggler_ops
in a target-specific file instead (such as ppc-bdm.c in the case
of the ppc), use current_target to deal with registers again
making this file less target-specific.
(bdm_read_register_command): new
(_initialize_remote_wiggler): stop doing add_target (&wiggler_ops),
comment out add_cmd ("read-register", ...)
* ocd.h: new, contains common wiggler prototypes, command definitions
* ppc-bdm.c: file for ppc-specific OCD code, including target_ops
structure for ppc bdm
(bdm_ppc_open): new
(bdm_ppc_wait): new
(bdm_ppc_fetch_registers): new
(bdm_ppc_store_registers_: new
(_initialize_bdm_ppc): new
* config/powerpc/tm-ppc-eabi.h: add necessary CPU32 BDM defines
_WIN32.
(Tcl_Realloc, Tcl_Free): Likewise.
* configure.in: Check for cygwin32 environment. Define and
substitute WIN32LIBS and WIN32LDAPP. Always set configdir to
unix; setting it to win was for an old Tcl/Tk configuration
scheme.
* aclocal.m4 (CY_AC_LOAD_TKCONFIG): Substitute TK_BUILD_INCLUDES.
* Makefile.in (TK_CFLAGS): Add @TK_BUILD_INCLUDES@.
(WIN32LDAPP, WIN32LIBS): Define.
(CLIBS): Add $(WIN32LIBS).
(gdb): Use $(WIN32LDAPP).
* configure: Rebuild.
* Makefile.in, configure.in, aclocal.m4: Add Itcl, Tix, and
IDE configuration information.
* gdbtk.c (breakpoint_notify): Send address, linenumber and
filename when a breakpoint is set. Avoids call to bp_info.
(gdbtk_init): Call Tcl_FindExecutable(). Add code to handle
Itcl, Tix and IDE initialization.
* defs.h (init_ui_hook): Change prototype to accept one arg.
* main.c (gdb_init): Change prototype to accept one arg.
* top.c (gdb_init): Accepts one argument which it uses to
call (*init_ui_hook), which will be gdbtk_init(). This is
used for calling Tcl_FindExecutable().
* gdbtcl/breakpoint.tcl (gdbtk_tcl_breakpoint): Change to
accept variable number of args for compatibility with
cchanges in gdbtk.c.
* configure: Regenerated.
* gdbtcl/tclIndex: Regenerated.
* Makefile.in: Install gdbtcl dir instead of gdbtk.tcl.
* gdbtk.c: Added some ifdefs for Windows. Changed GDBTK_FILENAME
to GDBTK_LIBRARY, which is now a path to search.
(gdb_path_conv): New function. Convert Cygwin32 pathname to
DOS-style pathname.
* aclocal.m4, configure.in: Changes for Windows builds.
* configure: Rebuilt.
* configure, configure.in: Allow gdbserver to be configured
for cross-target environments.
* gdbserver/Makefile.in: Add simulator support.
* gdbserver/configure.in: Eliminate assumption that host == target.
Simplify using gdb/configure.tgt and gdb/configure.host.
Fix other minor configuration errors.
* gdbserver/low-sparc.c: Fix compile error.
* gdbserver/remote-utils.c: Eliminate assumption that registers
and addresses are four bytes. Fix minor compile errors and warnings.
* gdbserver/server.c: Rewrite numerous instances of identical code
for starting inferior processes to call new function start_inferior.
Eliminate assumption that registers and addresses are four bytes.
* gdbserver/server.h: Add missing prototypes to eliminate compiler
warnings.
* gdbserver/low-sim.c: New file to mate gdbserver with simulators.
* config/mips/vr5000.mt: Add Vr5000 simulator support to gdbserver.
* config/i386/linux.mh: Eliminate gdbserver support as a first step
in moving such support from host to target makefile fragments.
* config/i386/linux.mt: Move gdbserver support here from linux.mh.
support for WinGDB. Add mswin to configdirs.
* configure.in configure: Move calls to configure.host and
configure.tgt to the top of configure.in to allow them to set
config variables before they are referenced.
ENABLE_OBS, and THREAD_DB_OBS. These are consolidated into LIBS
and CONFIG_OBS.
* configure configure.in: Clean up test cases around thread support.
start-sanitize-v850
* configure.tgt (v850-*-*): Include v850ice.o and v850.lib if
host is Windows.
end-sanitize-v850
* c-valprint.c ch-valprint.c cp-valprint.c eval.c expprint.c
printcmd.c valops.c value.h values.c: Add bfd_section arg to
value_at and value_at_lazy.
* coffread.c dbxread.c elfread.c mdebugread.c minsyms.c symtab.h:
Add bfd_section arg to prim_record_minimal_symbol_and_info.
* corefile.c gdbcore.h printcmd.c valops.c: Use read_memory_section
instead of read_memory. It takes a bfd_section arg.
* coffread.c dbxread.c elfread.c gdb-stabs.h objfiles.h: Remove
unnecessary cast for assignment of struct dbx_symfile_info.
Struct objfile now uses a real pointer instead of PTR for this
element.
* dbxread.c (dbx_symfile_init): Stash bfd section pointers for
text, data and bss into dbx_symfile_info.
* exec.c (xfer_memory): Handle transfers for user-specified
sections.
* findvar.c (read_var_value locate_var_value): Copy bfd section
from the symbol to the value.
* gdb-stabs.h: Add section pointers for text, data and bss
sections.
* maint.c (translate address command): Add test code for overlay
address translation.
* printcmd.c (do_examine do_one_display): Now takes a bfd section
arg.
* (print_formatted x_command): Record current section along with
current address for repeated commands.
* sparc-nat.c (fetch_inferior_registers): Change
target_xfer_memory to target_{read write}_memory to allow changes
to target_xfer_memory interface for section info.
* symmisc.c (dump_msymbols print_symbol): Print section
assocaited with symbol.
* symtab.c (fixup_symbol_section): New routine to
add section info to symbols returned by lookup_symbol.
* symtab.h (struct general_symbol_info): Add bfd section to
symbols.
* target.c target.h (target_xfer_memory): Add bfd section to
args.
* (target_read_memory_section): New routine to read data from a
specific section.
* (target_memory_bfd_section): New global variable to pass bfd
section in to targets.
* valarith.c (value_add value_addr value_array): Preserve bfd
section when computing new value.
* value.h (struct value): Add bfd section to values.
* values.c (allocate_value value_copy): Initialize/preserve bfd
section.
* (unpack_double): Clean up _MSC_VER conditionals to remove
duplicate code.
start-sanitize-v850
* v850ice.c: New module to support communication with NEC's
PC-based ICE.
* config/v850/tm-v850.h (REGISTER_NAMES): Replace sp, gp, fp, and
ep names with rxx names. sp and fp are renamed via a different
mechanism.
end-sanitize-v850
* config.in, configure.in, configure: Check for <objlist.h>.
* configure.tgt: Handle mips*-sgi-irix6* like irix5 for now.
* cp-valprint.c (cp_print_value_fields): Use SYMBOL_VALUE_ADDRESS
instead of SYMBOL_BLOCK_VALUE to get the address of a static member.
* dwarf2read.c: Turn warnings and recoverable errors into complaints,
add new complaints where appropriate.
gcc -Wall cleanup.
(struct line_head): Change line_base from char to int to avoid
problems with compilers whose plain char is represented by an
unsigned char.
(struct partial_die_info): Add is_declaration field.
(dwarf2_tmp_obstack): New obstack for allocating temporary storage
used during symbol reading.
(cu_header_offset): New variable for resolving relative reference
dies.
(optimized_out, basereg, islocal, frame_base_reg, frame_base_offset):
New interface variables for decode_locdesc.
(struct dwarf2_pinfo): New structure for communication between
psymtab and symtab reading, passed via pst->read_symtab_private.
(dwarf2_has_info, dwarf2_build_psymtabs): Accept objects files
without line number sections.
(dwarf2_build_psymtabs_hard): Initialize temporary obstack
for symbol reading.
Allocate and initialize pst->read_symtab_private.
Relocate pst->textlow and pst->texthigh with baseaddr.
(scan_partial_symbols): Do not add DW_AT_declaration symbols
to the partial symbol table.
Add file scope enumerator symbols to the partial symbol table.
Fix typo in highpc computation.
If we didn't find a lowpc, set it to highpc to avoid complaints
from `maint check.
(add_partial_symbol): Relocate symbol values with baseaddr.
Add static DW_TAG_subprogram and DW_TAG_variable symbols to the
minimal symbol table.
Obtain symbol values for DW_TAG_variable symbols from the location
descriptor, skip symbols with missing location desciptors.
Skip symbols for aggregate types without children.
Handle enumerator symbols.
(dwarf2_psymtab_to_symtab): Issue symbol reading message if verbose.
(psymtab_to_symtab_1): Set local variables from
pst->read_symtab_private, set cu_header_offset and baseaddr.
Initialize temporary obstack for symbol reading, initialize
buildsym and add a cleanup to really_free_pendings.
Relocate highpc with baseaddr when calling end_symtab.
If the compilation is from a C file generated by language
preprocessors, do not set the symtab language if it was already
deduced by start_subfile.
Removed verbose sorting symbol table message.
(process_die): Handle DW_TAG_ptr_to_member_type and
DW_TAG_reference_type.
Use read_subroutine_type to get the function type for
DW_TAG_subprogram before calling read_func_scope.
(read_file_scope): Initialize file name to <unknown>, start_subfile
expects a non-NULL name.
If we didn't find a lowpc, set it to highpc to avoid complaints
from finish_symbol.
Relocate lowpc and highpc with baseaddr.
Get rid of Irix6.2 native cc compile machine prefix in comp_dir.
Zero out ftypes for each new compilation unit (may be different
language or different objfile).
Accept compilation units without line number information, pass
comp_dir to decode_lines.
(read_func_scope): Initialize function name to <unknown> to avoid
core dumps when DW_AT_name is missing.
Relocate lowpc and highpc with baseaddr.
Handle DW_AT_frame_base, keep result for DW_OP_fbreg operations.
Pass function type to new_symbol.
(read_lexical_block_scope): Relocate lowpc and highpc with baseaddr.
(read_structure_scope): Set TYPE_TAG_NAME, not TYPE_NAME.
Handle DW_TAG_class_type.
Copy fields to type_obstack, release temporary storage for fields.
Don't add symbol if die is a stub die and has no children.
Handle C++ static member fields.
(read_enumeration): Set TYPE_TAG_NAME, not TYPE_NAME.
Copy fields to type_obstack, release temporary storage for fields.
Let new_symbol handle the symbol creation for enumerators
instead of handcrafting a symbol.
Determine signedness of enum type from enumerators.
(dwarf_read_array_type): Handle variable length arrays.
Use lookup_pointer_type instead of handcrafting a type.
Create array type only if a DW_TAG_subrange_type was found.
(read_tag_pointer_type, read_tag_reference_type):
Use lookup_pointer_type and lookup_reference_type instead
of handcrafting a type.
(read_tag_ptr_to_member_type): New function to handle
DW_TAG_ptr_to_member_type.
(read_subroutine_type): Handle parameter dies.
Use lookup_function_type instead of handcrafting a type.
(read_typedef): Allocate a TYPE_CODE_TYPEDEF type for the typedef.
(read_base_type): If the type has a name, use init_type to create
a new type instead of second guessing a fundamental type.
(read_comp_unit): Reset die reference table before building
a new one.
(dwarf2_read_section): Read section contents into psymbol_obstack.
(dwarf2_read_abbrevs): Handle unterminated abbreviations
for a compile unit gracefully.
(read_partial_die): Zero partial die before reading its info.
Handle DW_AT_declaration.
Fix typo in handling of DW_FORM_block4.
(read_full_die): Fix typo in handling of DW_FORM_block4.
(read_1_signed_byte, read_2_signed_bytes, read_4_signed_bytes):
New routines to get signed values from a buffer.
(read_n_bytes, read_string): Allocate storage from the temporary
obstack. If the host char size permits it, return pointer
to buffer instead of allocating storage.
(set_cu_language): Handle DW_LANG_Mips_Assembler.
(dwarf_attr): Return NULL if reference die for DW_AT_specification
or DW_AT_abstract_origin die is not found.
(record_minimal_symbol): Removed, replaced with a direct call to
prim_record_minimal_symbol, it now handles saving the string itself.
(convert_locdesc): Removed, partial symtab reading now uses
decode_locdesc.
(dwarf_attr): Use dwarf2_get_ref_die_offset to get the absolute
offset for the die reference.
(dwarf_decode_lines): Complain if the line section info is missing.
Use read_1_signed_byte to extract lh.line_base to avoid
problems with compilers whose plain char is represented by an
unsigned char.
Add cleanups for allocated temporary storage.
Start a subfile for the first file in the state machine.
Fix off by one problem with dirs.dirs access.
Use comp_dir when directory index is 0.
Support multiple sequences (from Jason Merrill <jason@cygnus.com>).
(dwarf2_start_subfile): Try to keep line numbers from identical
absolute and relative file names in a common subfile.
(new_symbol): Allocate symbol and symbol name on the symbol_obstack.
Set SYMBOL_LINE from DW_AT_decl_line if present.
Set SYMBOL_TYPE from passed type if not NULL.
Change DW_TAG_variable symbol types with missing type entries
to a sensible type.
Handle optimized_out, offreg and islocal storage classes.
Add external symbols with type information whose address isn't
known as LOC_UNRESOLVED symbols.
Synthesize typedefs for C++ classes, structs, unions and enumerations.
Handle DW_TAG_enumerator symbols, complain for unrecognized
symbol tags.
(die_type): A missing DW_AT_type represents a void type.
Use dwarf2_get_ref_die_offset to get the absolute offset for
the die reference.
(die_containing_type): New function to build type from
DW_AT_containing_type attribut.
(read_type_die): Handle DW_TAG_ptr_to_member_type.
Treat DW_TAG_subprogram like DW_TAG_subroutine_type.
(dwarf_base_type): Fix typo with creation of FT_UNSIGNED_SHORT
fundamental type.
(create_name): Removed, symbol name allocation is now done
in new_symbol.
(dump_die): Use print_address_numeric to print a CORE_ADDR.
(dwarf2_empty_die_ref_table): New function to clear the die
reference table.
(dwarf2_get_ref_die_offset): New function to get the absolute
die offset from a die reference attribute.
(decode_locdesc): Complete rewrite using a stack, code mostly
borrowed from dwarfread.c:locval.
(dwarf_alloc_type): Removed, replaced by direct calls to alloc_type.
(dwarf_alloc_block): Allocate block on temporary obstack.
* elfread.c (elf_symtab_read): When handling Irix dynamic symbols,
skip section name symbols and relocate all others.
(elf_symfile_read): Build dwarf2 psymtab even if offset is non-zero.
* irix5-nat.c (fetch_core_registers): Handle core_reg_sect
from N32 executables. Call registers_fetched after extracting
the registers.
(obj_list_variant, struct link_map, LM_OFFSET, LM_ADDR): New
definitions to enable support of O32 and N32 format objlists.
(struct so_list): New members offset, so_name and lmstart to
eliminate dependencies from the objlist format used.
(solib_map_sections, symbol_add_stub, solib_add,
info_sharedlibrary_command, solib_address, clear_solib): Use
so_name and LM_OFFSET.
(first_link_map_member): Rewrite to enable support of O32 and N32
format objlists.
(next_link_map_member, xfer_link_map_member): New functions to
support O32 and N32 format objlists.
(find_solib): Use first_link_map_member, next_link_map_member and
xfer_link_map_member.
(solib_create_inferior_hook): Use TARGET_SIGNAL_* instead of
host signal numbers.
* mdebugread.c (parse_partial_symbols, handle_psymbol_enumerators):
Pass CORE_ADDR variant to add_psymbol_to_list.
* mips-tdep.c (heuristic_proc_desc): Stop examining the prologue
if we encounter a positive stack adjustment. Handle `move $30,$sp'.
Handle `sd reg,offset($sp)' for 32 bit ABIs.
* symmisc.c (dump_msymbols, print_partial_symbols): Use
print_address_numeric to print a SYMBOL_VALUE_ADDRESS.
(dump_symtab): Print compilation directory if it is not NULL.
* valops.c (search_struct_field, value_struct_elt_for_reference):
Use SYMBOL_VALUE_ADDRESS instead of SYMBOL_BLOCK_VALUE to get the
address of a static member.
if we encounter a positive stack adjustment.
(find_proc_desc): If heuristic_fence_post is non-zero, use
heuristic_proc_start to determine the start of a function before
calling heuristic_proc_desc.
* coffread.c (coff_symtab_read): Change minimal symbol types
for C_LABEL symbols from mst_* to mst_file_*.
* config/m68k/sun3os4.mh (MMALLOC_CFLAGS): Define MMCHECK_FORCE to 1.
* configure.in: Handle error message from sun3 native ld when
configuring HLDFLAGS.
* configure: Regenerated with autoconf.
* c-valprint.c (c_value_print): Adjust value address by VALUE_OFFSET.
* cp-valprint.c (cp_print_value): Prevent gdb crashes by making sure
that the virtual base pointer from an user object still points to
accessible memory.
* dbxread.c (dbx_symfile_init): Initialize sym_stab_info to
clear the recently added header_files fields.
(dbx_symfile_finish): Free hfiles[i].vector to avoid storage leak.
markers correctly; this fixes problem on Vr5000 where all
functions in a module had the same address.
* configure.in, configure.tgt, configure.host, gdbserver/configure.in:
Correct for pc-linux-gnu problem in config.guess.
* configure: Regenerate.
files).
* (SUBDIRS): Remove mswin.
* Change procedure for creating init.c. Speeds things up quite a
bit.
* config.in configure configure.in: Check for select, poll.
* Check for OSF header files before including hpux-thread.o.
* Don't configure doc or testsuite when building under MSVC.
* findvar.c value.h (read_register_pid write_register_pid): Make
global. Needed for hppa-tdep.c.
* (supply_register): Don't set pid to inferior_pid when supplying
registers.
* hppa-tdep.c (saved_pc_after_call): frame_saved_pc ->
FRAME_SAVED_PC.
* (frame_saved_pc): Change name to hppa_frame_saved_pc.
* (hppa_pop_frame): Don't use a pid of 0 with target_write_pc.
Use write_pc instead, which uses the correct pid.
* (target_read_pc target_write_pc): Use read/write_register_pid
instead of read/write_register to preserve the pid passed in.
* inftarg.c (child_can_run): Add flag child_suppress_run to allow
hpux-threads.c to override this as a runnable target.
* config/pa/nm-hppah.h: Define target_new_objfile and
target_pid_to_str.
* config/pa/tm-hppa.h (FRAME_SAVED_PC): Use hppa_frame_saved_pc
instead of frame_saved_pc.
* config/m68k/tm-m68k.h: Define TARGET_M68K for Wingdb.
* config/m68k/tm-monitor.h: Use FRAME_CHAIN_VALID_ALTERNATE, since
we can't easily determine the start file bounds with ELF.
* config/mips/tm-mips.h: Define TARGET_MIPS for Wingdb.
* hpux-thread.c: New file for HPUX/OSF thread support.
* osf-share/{README AT386/cma_thread_io.h HP800/cma_thread_io.h
RIOS/cma_thread_io.h cma_attr.h cma_deb_core.h cma_debug_client.h
cma_errors.h cma_handle.h cma_init.h cma_list.h cma_mutex.h
cma_sched.h cma_semaphore_defs.h cma_sequence.h cma_stack.h
cma_stack_int.h cma_tcb_defs.h cma_util.h}: New files for OSF
thread support.