gdb/testsuite/
* gdb.stabs/gdb11479.c (tag_dummy_enum): introduce a variable to cause
clang to emit the full definition of type required by the test
* gdb.stabs/gdb11479.exp (do_test): correct a typo in a test message
gdb/testsuite/
* gdb.cp/pr10728-x.cc: Return by value instead of pointer to coax
Clang into emitting the definition of the type.
* gdb.cp/pr10728-x.h: Ditto.
* gdb.cp/pr10728-y.cc: Ditto.
gdb/testsuite/
* gdb.base/label.exp: XFAIL label related tests under Clang.
* gdb.cp/cplabel.exp: Ditto.
* gdb.linespec/ls-errs.exp: Refactor tests to execute directly
and XFAIL under Clang those using labels.
I happen to see that 'double_label' isn't used in dwz.exp dwarf assembler.
Similarly, partial_label and double_label aren't used in dwzbuildid.exp.
This patch is to remove them.
gdb/testsuite:
2014-04-25 Yao Qi <yao@codesourcery.com>
* gdb.dwarf2/dwz.exp (Dwarf::assemble): Remove unused
double_label.
* gdb.dwarf2/dwzbuildid.exp (Dwarf::assemble): Remove
partial_label and double_label.
gdb/testsuite/
* gdb.cp/cpexprs.cc: Move braces to the same line as the start
of the function to work across GCC and Clang.
* gdb.cp/cpexprs.exp: Account for GCC/Clang difference in vtable
pointer types (const void ** const V void **).
This patch adds support for the Intel(R) Advanced Vector
Extensions 512 (Intel(R) AVX-512) registers. Native and remote
debugging are covered by this patch.
Intel(R) AVX-512 is an extension to AVX to support 512-bit wide
SIMD registers in 64-bit mode (XMM0-XMM31, YMM0-YMM31, ZMM0-ZMM31).
The number of available registers in 32-bit mode is still 8
(XMM0-7, YMM0-7, ZMM0-7). The lower 256-bits of the ZMM registers
are aliased to the respective 256-bit YMM registers. The lower
128-bits are aliased to the respective 128-bit XMM registers.
There are also 8 new, dedicated mask registers (K0-K7) in both 32-bit
mode and 64-bit mode.
For more information please see
Intel(R) Developer Zone: Intel(R) AVX
http://software.intel.com/en-us/intel-isa-extensions#pid-16007-1495
Intel(R) Architecture Instruction Set Extensions Programming Reference:
http://software.intel.com/en-us/file/319433-017pdf
2014-04-24 Michael Sturm <michael.sturm@mintel.com>
Walfred Tedeschi <walfred.tedeschi@intel.com>
* amd64-linux-nat.c (amd64_linux_gregset32_reg_offset): Add
AVX512 registers.
(amd64_linux_read_description): Add code to handle AVX512 xstate
mask and return respective tdesc.
* amd64-linux-tdep.c: Include features/i386/amd64-avx512-linux.c
and features/i386/x32-avx512-linux.c.
(amd64_linux_gregset_reg_offset): Add AVX512 registers.
(amd64_linux_core_read_description): Add code to handle AVX512
xstate mask and return respective tdesc.
(_initialize_amd64_linux_tdep): Initialize AVX512 tdesc.
* amd64-linux-tdep.h (AMD64_LINUX_ORIG_RAX_REGNUM): Adjust regnum
calculation.
(AMD64_LINUX_NUM_REGS): Adjust to new number of registers.
(tdesc_amd64_avx512_linux): New prototype.
(tdesc_x32_avx512_linux): Likewise.
* amd64-tdep.c: Include features/i386/amd64-avx512.c and
features/i386/x32-avx512.c.
(amd64_ymm_avx512_names): New register names for pseudo
registers YMM16-31.
(amd64_ymmh_avx512_names): New register names for raw registers
YMMH16-31.
(amd64_k_names): New register names for K registers.
(amd64_zmmh_names): New register names for ZMM raw registers.
(amd64_zmm_names): New registers names for ZMM pseudo registers.
(amd64_xmm_avx512_names): New register names for XMM16-31
registers.
(amd64_pseudo_register_name): Add code to return AVX512 pseudo
registers.
(amd64_init_abi): Add code to intitialize AVX512 tdep variables
if feature is present.
(_initialize_amd64_tdep): Call AVX512 tdesc initializers.
* amd64-tdep.h (enum amd64_regnum): Add AVX512 registers.
(AMD64_NUM_REGS): Adjust to new number of registers.
* i386-linux-nat.c (GETXSTATEREGS_SUPPLIES): Extend range of
registers supplied via XSTATE by AVX512 registers.
(i386_linux_read_description): Add case for AVX512.
* i386-linux-tdep.c: Include i386-avx512-linux.c.
(i386_linux_gregset_reg_offset): Add AVX512 registers.
(i386_linux_core_read_description): Add case for AVX512.
(i386_linux_init_abi): Install supported register note section
for AVX512.
(_initialize_i386_linux_tdep): Add call to tdesc init function for
AVX512.
* i386-linux-tdep.h (I386_LINUX_NUM_REGS): Set number of
registers to be number of zmm7h + 1.
(tdesc_i386_avx512_linux): Add tdesc for AVX512 registers.
* i386-tdep.c: Include features/i386/i386-avx512.c.
(i386_zmm_names): Add ZMM pseudo register names array.
(i386_zmmh_names): Add ZMM raw register names array.
(i386_k_names): Add K raw register names array.
(num_lower_zmm_regs): Add constant for the number of lower ZMM
registers. AVX512 has 16 more ZMM registers than there are YMM
registers.
(i386_zmmh_regnum_p): Add function to look up register number of
ZMM raw registers.
(i386_zmm_regnum_p): Likewise for ZMM pseudo registers.
(i386_k_regnum_p): Likewise for K raw registers.
(i386_ymmh_avx512_regnum_p): Likewise for additional YMM raw
registers added by AVX512.
(i386_ymm_avx512_regnum_p): Likewise for additional YMM pseudo
registers added by AVX512.
(i386_xmm_avx512_regnum_p): Likewise for additional XMM registers
added by AVX512.
(i386_register_name): Add code to hide YMMH16-31 and ZMMH0-31.
(i386_pseudo_register_name): Add ZMM pseudo registers.
(i386_zmm_type): Construct and return vector registers type for ZMM
registers.
(i386_pseudo_register_type): Return appropriate type for YMM16-31,
ZMM0-31 pseudo registers and K registers.
(i386_pseudo_register_read_into_value): Add code to read K, ZMM
and YMM16-31 registers from register cache.
(i386_pseudo_register_write): Add code to write K, ZMM and
YMM16-31 registers.
(i386_register_reggroup_p): Add code to include/exclude AVX512
registers in/from respective register groups.
(i386_validate_tdesc_p): Handle AVX512 feature, add AVX512
registers if feature is present in xcr0.
(i386_gdbarch_init): Add code to initialize AVX512 feature
variables in tdep structure, wire in pseudo registers and call
initialize_tdesc_i386_avx512.
* i386-tdep.h (struct gdbarch_tdep): Add AVX512 related
variables.
(i386_regnum): Add AVX512 registers.
(I386_SSE_NUM_REGS): New define for number of SSE registers.
(I386_AVX_NUM_REGS): Likewise for AVX registers.
(I386_AVX512_NUM_REGS): Likewise for AVX512 registers.
(I386_MAX_REGISTER_SIZE): Change to 64 bytes, ZMM registers are
512 bits wide.
(i386_xmm_avx512_regnum_p): New prototype for register look up.
(i386_ymm_avx512_regnum_p): Likewise.
(i386_k_regnum_p): Likewise.
(i386_zmm_regnum_p): Likewise.
(i386_zmmh_regnum_p): Likewise.
* i387-tdep.c : Update year in copyright notice.
(xsave_ymm_avx512_offset): New table for YMM16-31 offsets in
XSAVE buffer.
(XSAVE_YMM_AVX512_ADDR): New macro.
(xsave_xmm_avx512_offset): New table for XMM16-31 offsets in
XSAVE buffer.
(XSAVE_XMM_AVX512_ADDR): New macro.
(xsave_avx512_k_offset): New table for K register offsets in
XSAVE buffer.
(XSAVE_AVX512_K_ADDR): New macro.
(xsave_avx512_zmm_h_offset): New table for ZMM register offsets
in XSAVE buffer.
(XSAVE_AVX512_ZMM_H_ADDR): New macro.
(i387_supply_xsave): Add code to supply AVX512 registers to XSAVE
buffer.
(i387_collect_xsave): Add code to collect AVX512 registers from
XSAVE buffer.
* i387-tdep.h (I387_NUM_XMM_AVX512_REGS): New define for number
of XMM16-31 registers.
(I387_NUM_K_REGS): New define for number of K registers.
(I387_K0_REGNUM): New define for K0 register number.
(I387_NUM_ZMMH_REGS): New define for number of ZMMH registers.
(I387_ZMM0H_REGNUM): New define for ZMM0H register number.
(I387_NUM_YMM_AVX512_REGS): New define for number of YMM16-31
registers.
(I387_YMM16H_REGNUM): New define for YMM16H register number.
(I387_XMM16_REGNUM): New define for XMM16 register number.
(I387_YMM0_REGNUM): New define for YMM0 register number.
(I387_KEND_REGNUM): New define for last K register number.
(I387_ZMMENDH_REGNUM): New define for last ZMMH register number.
(I387_YMMH_AVX512_END_REGNUM): New define for YMM31 register
number.
(I387_XMM_AVX512_END_REGNUM): New define for XMM31 register
number.
* common/i386-xstate.h: Add AVX 3.1 feature bits, mask and XSTATE
size.
* features/Makefile: Add AVX512 related files.
* features/i386/32bit-avx512.xml: New file.
* features/i386/64bit-avx512.xml: Likewise.
* features/i386/amd64-avx512-linux.c: Likewise.
* features/i386/amd64-avx512-linux.xml: Likewise.
* features/i386/amd64-avx512.c: Likewise.
* features/i386/amd64-avx512.xml: Likewise.
* features/i386/i386-avx512-linux.c: Likewise.
* features/i386/i386-avx512-linux.xml: Likewise.
* features/i386/i386-avx512.c: Likewise.
* features/i386/i386-avx512.xml: Likewise.
* features/i386/x32-avx512-linux.c: Likewise.
* features/i386/x32-avx512-linux.xml: Likewise.
* features/i386/x32-avx512.c: Likewise.
* features/i386/x32-avx512.xml: Likewise.
* regformats/i386/amd64-avx512-linux.dat: New file.
* regformats/i386/amd64-avx512.dat: Likewise.
* regformats/i386/i386-avx512-linux.dat: Likewise.
* regformats/i386/i386-avx512.dat: Likewise.
* regformats/i386/x32-avx512-linux.dat: Likewise.
* regformats/i386/x32-avx512.dat: Likewise.
* NEWS: Add note about new support for AVX512.
testsuite/
* Makefile.in (EXECUTABLES): Added i386-avx512.
* gdb.arch/i386-avx512.c: New file.
* gdb.arch/i386-avx512.exp: Likewise.
gdbserver/
* Makefile.in: Added rules to handle new files
i386-avx512.c i386-avx512-linux.c amd64-avx512.c
amd64-avx512-linux.c x32-avx512.c x32-avx512-linux.c.
* configure.srv (srv_i386_regobj): Add i386-avx512.o.
(srv_i386_linux_regobj): Add i386-avx512-linux.o.
(srv_amd64_regobj): Add amd64-avx512.o and x32-avx512.o.
(srv_amd64_linux_regobj): Add amd64-avx512-linux.o and
x32-avx512-linux.o.
(srv_i386_32bit_xmlfiles): Add i386/32bit-avx512.xml.
(srv_i386_64bit_xmlfiles): Add i386/64bit-avx512.xml.
(srv_amd64_xmlfiles): Add i386/amd64-avx512.xml and
i386/x32-avx512.xml.
(srv_i386_linux_xmlfiles): Add i386/i386-avx512-linux.xml.
(srv_amd64_linux_xmlfiles): Add i386/amd64-avx512-linux.xml and
i386/x32-avx512-linux.xml.
* i387-fp.c (num_avx512_k_registers): New constant for number
of K registers.
(num_avx512_zmmh_low_registers): New constant for number of
lower ZMM registers (0-15).
(num_avx512_zmmh_high_registers): New constant for number of
higher ZMM registers (16-31).
(num_avx512_ymmh_registers): New contant for number of higher
YMM registers (ymm16-31 added by avx521 on x86_64).
(num_avx512_xmm_registers): New constant for number of higher
XMM registers (xmm16-31 added by AVX512 on x86_64).
(struct i387_xsave): Add space for AVX512 registers.
(i387_cache_to_xsave): Change raw buffer size to 64 characters.
Add code to handle AVX512 registers.
(i387_xsave_to_cache): Add code to handle AVX512 registers.
* linux-x86-low.c (init_registers_amd64_avx512_linux): New
prototypei from generated file.
(tdesc_amd64_avx512_linux): Likewise.
(init_registers_x32_avx512_linux): Likewise.
(tdesc_x32_avx512_linux): Likewise.
(init_registers_i386_avx512_linux): Likewise.
(tdesc_i386_avx512_linux): Likewise.
(x86_64_regmap): Add AVX512 registers.
(x86_linux_read_description): Add code to handle AVX512 XSTATE
mask.
(initialize_low_arch): Add code to initialize AVX512 registers.
doc/
* gdb.texinfo (i386 Features): Add description of AVX512
registers.
Change-Id: Ifc4c08c76b85dbec18d02efdbe6182e851584438
Signed-off-by: Michael Sturm <michael.sturm@intel.com>
breakpoint table handling. This is a patch in five parts (all committed
here in one commit).
----- 1/5: parse_args
parse_args is a very useful utility function which allows you to do
getopt-y kinds of things in Tcl.
Example:
proc myproc {foo args} {
parse_args {{bar} {baz "abc"} {qux}}
# ...
}
myproc ABC -bar -baz DEF peanut butter
will define the following variables in myproc:
foo (=ABC), bar (=1), baz (=DEF), and qux (=0)
args will be the list {peanut butter}
----- 2/5: mi_build_kv_pairs
build_kv_pairs simply does what it says: given the input list
and an option join string, it combines list elements into kv-pairs
for MI handling. It knows how to handle tuples and other special
MI types.
Example:
mi_build_kv_pairs {a b c d e f g \[.*\]}
returns a=\"b\",c=\"d\",e=\"f\",g=\[.*\]
----- 3/5: mi_make_breakpoint
This function builds breakpoint regexps, such as
"bkpt={number=\".*\", [snip]}".
Note that ONLY the options given to mi_make_breakpoint/mi_create_breakpoint
will actually be tested. So if -number is omitted, the regexp will allow
anything [number=\".*\"]
Examples:
mi_make_breakpoint -number 3
mi_create_breakpoint "myfile.c:21" -file myfile.c -line 21
----- 4/5: mi_make_breakpoint_table
This function builds MI breakpoint table regexps.
Example:
set bps {}
lappend bps [mi_make_breakpoint -number 1 -func "main" \
-file ".*/myfile.c" -line 42
lappend bps [mi_make_breakpoint -number 2 -func "marker" \
-file ".*myfile.c" -line 21
gdb_test "-break-info" "\\^done,[mi_make_breakpoint_table $bps]" \
"breakpoint list"
----- 5/5: Update all callers
Self-explanatory
testsuite/ChangeLog
2014-04-23 Keith Seitz <keiths@redhat.com>
* lib/mi-support.exp (mi_list_breakpoints): Delete.
(mi_make_breakpoint_table): New procedure.
(mi_create_breakpoint): Use mi_make_breakpoint
and return the result.
(mi_make_breakpoint): New procedure.
(mi_build_kv_pairs): New procedure.
* gdb.mi/mi-break.exp: Remove unused globals,
update mi_create_breakpoint usage, and use mi_make_breakpoint_table.
All callers updated.
* gdb.mi/mi-dprintf.exp: Use variable to track command
number.
Update all callers of mi_create_breakpoint and use
mi_make_breakpoint_table.
Remove any unused global variables.
* gdb.mi/mi-nonstop.exp: Likewise.
* gdb.mi/mi-nsintrall.exp: Likewise.
* gdb.mi/mi-nsmoribund.exp: Likewise.
* gdb.mi/mi-nsthrexec.exp: Likewise.
* gdb.mi/mi-reverse.exp: Likewise.
* gdb.mi/mi-simplerun.exp: Likewise.
* gdb.mi/mi-stepn.exp: Likewise.
* gdb.mi/mi-syn-frame.exp: Likewise.
* gdb.mi/mi-until.exp: Likewise.
* gdb.mi/mi-var-cp.exp: Likewise.
* gdb.mi/mi-var-display.exp: Likewise.
* gdb.mi/mi2-amd64-entry-value.exp: Likewise.
* gdb.mi/mi2-var-child.exp: Likewise.
* gdb.mi/mi-vla-c99.exp: Likewise.
* lib/mi-support.exp: Likewise.
From Ian Lance Taylor <iant@cygnus.com>:
* lib/gdb.exp (parse_args): New procedure.
Without the code portion of the patch, we get these failures:
FAIL: gdb.base/break-unload-file.exp: always-inserted on: break: continue
FAIL: gdb.base/break-unload-file.exp: always-inserted on: hbreak: continue
FAIL: gdb.base/sym-file.exp: stale bkpts: continue to breakpoint: end here
They all looks like random SIGTRAPs:
continue
Continuing.
Program received signal SIGTRAP, Trace/breakpoint trap.
0x0000000000400541 in foo () at ../../../src/gdb/testsuite/gdb.base/break-unload-file.c:21
21 }
(gdb) FAIL: gdb.base/break-unload-file.exp: always-inserted on: break: continue
(This is a regression caused by the remove-symbol-file command
series.)
break-unload-file.exp is about having breakpoints inserted, and then
doing "file". I caught this while writing a test that does "file
PROGRAM", while PROGRAM was already loaded, which internally does
"file" first, because I wanted to force a breakpoint_re_set, but the
test is more explicit in case GDB ever optimizes out that re-set.
The problem is that unloading the file with "file" ends up in
disable_breakpoints_in_freed_objfile, which marks all breakpoint
locations of the objfile as both shlib_disabled, _and_ clears the
inserted flag, without actually removing the breakpoints from the
inferior. Now, usually, in all-stop, breakpoints will already be
removed from the inferior before the user can issue the "file"
command, but, with non-stop, or breakpoints always-inserted on mode,
breakpoints stay inserted even while the user has the prompt. In the
latter case, then, if we let the program continue, and it executes the
address where we had previously set the breakpoint, it'll actually
execute the breakpoint instruction that we left behind...
Now, one issue is that the intent of
disable_breakpoints_in_freed_objfile is really to handle the unloading
of OBJF_USERLOADED objfiles. These are objfiles that were added with
add-symbol-file and that are removed with remove-symbol-file.
"add-symbol-file"'s docs in the manual clearly say these commands are
used to let GDB know about dynamically loaded code:
You would use this command when @var{filename} has been dynamically
loaded (by some other means) into the program that is running.
Similarly, the online help says:
(gdb) help add-symbol-file
Load symbols from FILE, assuming FILE has been dynamically loaded.
So it makes sense to, like when shared libraries are unloaded through
the generic solib machinery, mark the breakpoint locations as
shlib_disabled. But, the "file" command is not about dynamically
loaded code, it's about the main program. So the patch makes
disable_breakpoints_in_freed_objfile skip all objfiles but
OBJF_USERLOADED ones, thus skipping the main objfile.
Then, the reason that disable_breakpoints_in_freed_objfile was
clearing the inserted flag isn't clear, but likely to avoid breakpoint
removal errors, assuming remove-symbol-file was called after the
dynamic object was already unmapped from the inferior. In that case,
it'd okay to simply clear the inserted flag, but not so if the user
for example does remove-symbol-file to remove the library because he
made a mistake in the library's address, and wants to re-do
add-symbol-file with the correct address.
To address all that, I propose an alternative implementation, that
handles both cases. The patch includes changes to sym-file.exp to
cover them.
This implementation leaves the inserted flag alone, and handles
breakpoint insertion/removal failure gracefully when the locations are
in OBJF_USERLOADED objfiles, just like we handle insertion/removal
failure gracefully for locations in shared libraries.
To try to make sure we aren't patching back stale shadow memory
contents into the inferior, in case the program mapped a different
library at the same address where we had the breakpoint, without the
user having had a chance of remove-symbol-file'ing before, this adds a
new memory_validate_breakpoint function that checks if the breakpoint
instruction is still in memory. ppc_linux_memory_remove_breakpoint
does this unconditionally for all memory breakpoints, and questions
whether memory_remove_breakpoint should be changed to do this for all
breakpoints. Possibly yes, though I'm not certain, hence this
baby-steps patch.
Tested on x86_64 Fedora 17, native and gdbserver.
gdb/
2014-04-23 Pedro Alves <palves@redhat.com>
* breakpoint.c (insert_bp_location): Tolerate errors if the
breakpoint is set in a user-loaded objfile.
(remove_breakpoint_1): Likewise. Also tolerate errors if the
location is marked shlib_disabled. If the breakpoint is set in a
user-loaded objfile is a GDB-side memory breakpoint, validate it
before uninsertion. (disable_breakpoints_in_freed_objfile): Skip
non-OBJF_USERLOADED objfiles. Don't clear the location's inserted
flag.
* mem-break.c (memory_validate_breakpoint): New function.
* objfiles.c (userloaded_objfile_contains_address_p): New
function.
* objfiles.h (userloaded_objfile_contains_address_p): Declare.
* target.h (memory_validate_breakpoint): New declaration.
gdb/testsuite/
2014-04-23 Pedro Alves <palves@redhat.com>
* gdb.base/break-unload-file.c: New file.
* gdb.base/break-unload-file.exp: New file.
* gdb.base/sym-file-lib.c (baz): New function.
* gdb.base/sym-file-loader.c (struct segment) <mapped_size>: New
field.
(load): Store the segment's mapped size.
(unload): New function.
(unload_shlib): New function.
* gdb.base/sym-file-loader.h (unload_shlib): New declaration.
* gdb.base/sym-file-main.c (main): Unload, and reload the library,
set a breakpoint at baz, and call it.
* gdb.base/sym-file.exp: New tests for stale breakpoint
instructions.
libraries.
As explained in
https://sourceware.org/ml/gdb-patches/2008-08/msg00361.html, after a
shared library was unloaded, we can no longer insert or remove
breakpoints into/from its (no longer present) code segment. That'll
fail with memory errors. However, that concern does not apply to
hardware breakpoints. By definition, hardware breakpoints are
implemented using a mechanism that is not dependent on being able to
modify the target's memory. Usually, by setting up CPU debug
registers. IOW, we should be able to set hw breakpoints in an
unmapped address. We don't seem to have a test that exercises that,
so this patch adds one.
I noticed the error supression because of a related issue -- the
target_insert_hw_breakpoint/target_remove_hw_breakpoint interfaces
don't really distinguish "not supported" from "error" return, and so
remote.c returns -1 in both cases. This results in hardware
breakpoints set in shared libraries silently ending up pending forever
even though the target doesn't actually support hw breakpoints.
(gdb) set breakpoint always-inserted on
(gdb) set remote Z-packet off
(gdb) info breakpoints
No breakpoints or watchpoints.
(gdb) hbreak shrfunc
Hardware assisted breakpoint 3 at 0x7ffff7dfb657: file ../../../src/gdb/testsuite/gdb.base/hbreak-in-shr-unsupported-shr.c, line 21.
(gdb) info break
Num Type Disp Enb Address What
3 hw breakpoint keep y <PENDING> shrfunc
After the patch we get the expected:
(gdb) hbreak shrfunc
Hardware assisted breakpoint 3 at 0x7ffff7dfb657: file ../../../src/gdb/testsuite/gdb.base/hbreak-in-shr-unsupported-shr.c, line 21.
Warning:
Cannot insert hardware breakpoint 3.
Could not insert hardware breakpoints:
You may have requested too many hardware breakpoints/watchpoints.
(gdb) info break
Num Type Disp Enb Address What
3 hw breakpoint keep y 0x00007ffff7dfb657 in shrfunc at ../../../src/gdb/testsuite/gdb.base/hbreak-in-shr-unsupported-shr.c:21
(HW breakpoints set in the main executable, when the target doesn't
support HW breakpoints always resulted in the latter output.)
We probably should improve the insert/remove interface to return a
different error code for unsupported. But I chose to fix the error
supression first, as it's a deeper and wider issue.
Tested on x86_64 Fedora 17, native and gdbserver.
gdb/
2014-04-23 Pedro Alves <palves@redhat.com>
* breakpoint.c (insert_bp_location, remove_breakpoint_1): If
the breakpoint is set in a shared library, only suppress
errors for software breakpoints, not hardware breakpoints.
gdb/testsuite/
2014-04-23 Pedro Alves <palves@redhat.com>
* gdb.base/hbreak-in-shr-unsupported-shr.c: New file.
* gdb.base/hbreak-in-shr-unsupported.c: New file.
* gdb.base/hbreak-in-shr-unsupported.exp: New file.
* gdb.base/hbreak-unmapped.c: New file.
* gdb.base/hbreak-unmapped.exp: New file.
* gdb.trace/qtro.exp (gdb_is_target_remote): Move ...
* lib/gdb.exp (gdb_is_target_remote): ... here.
If a thread trips on a breakpoint that needs stepping over just after
finishing a step over, GDB currently fails an assertion. This is a
regression caused by the "Handle multiple step-overs." patch
(99619beac6) at
https://sourceware.org/ml/gdb-patches/2014-02/msg00765.html.
(gdb) x /4i $pc
=> 0x400540 <main+4>: movl $0x0,0x2003da(%rip) # 0x600924 <i>
0x40054a <main+14>: movl $0x1,0x2003d0(%rip) # 0x600924 <i>
0x400554 <main+24>: movl $0x2,0x2003c6(%rip) # 0x600924 <i>
0x40055e <main+34>: movl $0x3,0x2003bc(%rip) # 0x600924 <i>
(gdb) PASS: gdb.base/consecutive-step-over.exp: get breakpoint addresses
break *0x40054a
Breakpoint 2 at 0x40054a: file ../../../src/gdb/testsuite/gdb.base/consecutive-step-over.c, line 23.
(gdb) PASS: gdb.base/consecutive-step-over.exp: insn 1: set breakpoint
condition $bpnum condition
(gdb) PASS: gdb.base/consecutive-step-over.exp: insn 1: set condition
break *0x400554
Breakpoint 3 at 0x400554: file ../../../src/gdb/testsuite/gdb.base/consecutive-step-over.c, line 24.
(gdb) PASS: gdb.base/consecutive-step-over.exp: insn 2: set breakpoint
condition $bpnum condition
(gdb) PASS: gdb.base/consecutive-step-over.exp: insn 2: set condition
break *0x40055e
Breakpoint 4 at 0x40055e: file ../../../src/gdb/testsuite/gdb.base/consecutive-step-over.c, line 25.
(gdb) PASS: gdb.base/consecutive-step-over.exp: insn 3: set breakpoint
condition $bpnum condition
(gdb) PASS: gdb.base/consecutive-step-over.exp: insn 3: set condition
break 27
Breakpoint 5 at 0x400568: file ../../../src/gdb/testsuite/gdb.base/consecutive-step-over.c, line 27.
(gdb) continue
Continuing.
../../src/gdb/infrun.c:5200: internal-error: switch_back_to_stepped_thread: Assertion `!tp->control.trap_expected' failed.
A problem internal to GDB has been detected,
further debugging may prove unreliable.
FAIL: gdb.base/consecutive-step-over.exp: continue to breakpoint: break here (GDB internal error)
The assertion fails, because the code is not expecting that the event
thread itself might need another step over. IOW, not expecting that
TP in:
tp = find_thread_needs_step_over (stepping_thread != NULL,
stepping_thread);
could be the event thread.
A small fix for this would be to clear the event thread's
trap_expected earlier, before asserting. But looking deeper, although
currently_stepping_or_nexting_callback's intention is finding the
thread that is doing a step/next, it also returns the thread that is
doing a step-over dance, with trap_expected set. If there ever was a
reason for that (it was I who added
currently_stepping_or_nexting_callback , but I can't recall why I put
trap_expected there in the first place), the only remaining reason
nowadays is to aid in implementing switch_back_to_stepped_thread's
assertion that is now triggering, by piggybacking on the walk over all
threads, thus avoiding a separate walk. This is quite obscure, and I
think we can do even better, by merging the walks that look for the
stepping thread, and the walk that looks for some thread that might
need a step over.
Tested on x86_64 Fedora 17, native and gdbserver, and also native on
top of my "software single-step on x86_64" series.
gdb/
2014-04-22 Pedro Alves <palves@redhat.com>
* infrun.c (schedlock_applies): New function, factored out from
find_thread_needs_step_over.
(find_thread_needs_step_over): Use it.
(switch_back_to_stepped_thread): Always clear trap_expected if the
step over is finished. Return early if scheduler locking applies.
Look for the stepping thread and a potential step-over thread with
a single loop.
(currently_stepping_or_nexting_callback): Delete.
2014-04-22 Pedro Alves <palves@redhat.com>
* gdb.base/consecutive-step-over.c: New file.
* gdb.base/consecutive-step-over.exp: New file.
This switches the gdb_continue_to_breakpoint routine to use
gdb_test_multiple instead of send_gdb/gdb_expect, so that an internal
error is detected immediately, instead of failing on timeout.
gdb/testsuite/
2014-04-22 Pedro Alves <palves@redhat.com>
* lib/gdb.exp (gdb_continue_to_breakpoint): Use gdb_test_multiple
instead of send_gdb/gdb_expect.
In gdb.trace/tfile.exp, we execute binary to generate tracefile,
remote_exec target "$binfile"
however, this fails on bare metal target. This patch is to
handle binary execution failure by running binary in GDB.
The binary will do some io operation to generate tracefile, so
we need a check 'target_info exists gdb,nofileio'.
This patch is to check whether tracefile is generated. tfile.exp can
be skipped if generation is failed, while test_tfind_tfile in
mi-traceframe-changed.exp is skipped if generated failed. The rest of
the mi-traceframe-changed.exp can still be executed, because on some
bare metal targets, the remote stub supports tracepoint but doesn't
support fileio.
gdb/testsuite:
2014-04-22 Yao Qi <yao@codesourcery.com>
* lib/trace-support.exp (generate_tracefile): New procedure.
* gdb.trace/tfile.exp: Skip the test if generate_tracefile
return 0.
* gdb.trace/mi-traceframe-changed.exp: Invoke test_tfind_tfile
if generate_tracefile returns 1.
This PR is about an assertion failure in GDB that can be triggered by
setting "backtrace limit" to a value that causes GDB to stop unwinding
after an inline frame. In this case, an assertion in
inline_frame_this_id will trigger:
/* We need a valid frame ID, so we need to be based on a valid
frame. (...). */
gdb_assert (frame_id_p (*this_id));
Looking at the function:
static void
inline_frame_this_id (struct frame_info *this_frame,
void **this_cache,
struct frame_id *this_id)
{
struct symbol *func;
/* In order to have a stable frame ID for a given inline function,
we must get the stack / special addresses from the underlying
real frame's this_id method. So we must call get_prev_frame.
Because we are inlined into some function, there must be previous
frames, so this is safe - as long as we're careful not to
create any cycles. */
*this_id = get_frame_id (get_prev_frame (this_frame));
we see we're computing the frame id for the inline frame. If this is
an inline frame, which is a virtual frame constructed based on debug
info, on top of a real stack frame, we should _always_ be able to find
where the frame was inlined into, as that ultimately just means
peeling off the virtual frames on top of the real stack frame. If
there ultimately was no prev (real) stack frame, then we wouldn't have
been able to construct the inline frame either, by design. That's
what the assertion catches.
So we have an inline frame, we should _always_ be able to compute its
ID, even if that means bypassing the user backtrace limits to get at
the real stack frame's info. The problem is that inline_frame_id
calls get_prev_frame, and that takes user backtrace limits into
account. Code that wants to bypass the limits calls get_prev_frame_1
instead.
Note how get_prev_frame_1 already skips all checks for inline frames:
/* If we are unwinding from an inline frame, all of the below tests
were already performed when we unwound from the next non-inline
frame. We must skip them, since we can not get THIS_FRAME's ID
until we have unwound all the way down to the previous non-inline
frame. */
if (get_frame_type (this_frame) == INLINE_FRAME)
return get_prev_frame_if_no_cycle (this_frame);
And note how the related frame_unwind_caller_id function also uses
get_prev_frame_1:
struct frame_id
frame_unwind_caller_id (struct frame_info *next_frame)
{
struct frame_info *this_frame;
/* Use get_prev_frame_1, and not get_prev_frame. The latter will truncate
the frame chain, leading to this function unintentionally
returning a null_frame_id (e.g., when a caller requests the frame
ID of "main()"s caller. */
next_frame = skip_artificial_frames (next_frame);
this_frame = get_prev_frame_1 (next_frame);
if (this_frame)
return get_frame_id (skip_artificial_frames (this_frame));
else
return null_frame_id;
}
get_prev_frame_1 is currently static in frame.c. As a _1 suffix is
not a good name for an extern function, I've renamed it.
Tested on x86-64 Fedora 17.
gdb/
2014-04-18 Pedro alves <palves@redhat.com>
Tom Tromey <tromey@redhat.com>
PR backtrace/15558
* frame.c (get_prev_frame_1): Rename to ...
(get_prev_frame_always): ... this, and make extern. Adjust.
(skip_artificial_frames): Use get_prev_frame_always.
(frame_unwind_caller_id, frame_pop, get_prev_frame)
(get_frame_unwind_stop_reason): Adjust to rename.
* frame.h (get_prev_frame_always): Declare.
* inline-frame.c: Include frame.h.
(inline_frame_this_id): Use get_prev_frame_always.
gdb/testsuite/
2014-04-18 Tom Tromey <palves@redhat.com>
Pedro alves <tromey@redhat.com>
PR backtrace/15558
* gdb.opt/inline-bt.exp: Test backtracing from an inline function
with a backtrace limit.
* gdb.python/py-frame-inline.exp: Test running to an inline
function with a backtrace limit, and printing the newest frame.
* gdb.python/py-frame-inline.c (main): Call f.
Hi,
We find gdb.base/printcmds.exp fails a lot on windows host, like this,
p ctable1[163]
$204 = 163 '£'
(gdb) FAIL: gdb.base/printcmds.exp: p ctable1[163]
however, on linux host,
p ctable1[163]
$205 = 163 '\243'
(gdb) PASS: gdb.base/printcmds.exp: p ctable1[163]
The printing related code is in valprint.c:print_wchar,
if (gdb_iswprint (w) && (!need_escape || (!gdb_iswdigit (w)
&& w != LCST ('8')
&& w != LCST ('9'))))
{
gdb_wchar_t wchar = w;
if (w == gdb_btowc (quoter) || w == LCST ('\\'))
obstack_grow_wstr (output, LCST ("\\"));
obstack_grow (output, &wchar, sizeof (gdb_wchar_t));
}
else
{
// print W in hex or octal digits
}
When I debug gdb on different hosts, I find
on windows host, gdb_iswprint (iswprint) returns true if 'w' is 163.
However, on linux host, iswprint returns false if 'w' is 163. Looks
this difference is caused by the charset. On Linux host,
the target-charset is ANSI_X3.4-1968, while on windows host, the
target-charset is CP1252.
We can see how target-charset affects the output. On linux host,
(gdb) set target-charset ASCII
(gdb) p ctable1[163]
$1 = 163 '\243'
(gdb) set target-charset CP1252
(gdb) p ctable1[163]
$2 = 163 '£'
we can print the pound sign too, and it shows target-charset does
affect the output.
This patch is to set target-charset temporarily to ASCII for some
charset-sensitive tests. Tested on arm-none-eabi and
powerpc-linux-gnu on mingw32 host. More than one hundred fails are
fixed.
gdb/testsuite:
2014-04-17 Yao Qi <yao@codesourcery.com>
* lib/gdb.exp (with_target_charset): New proc.
* gdb.base/printcmds.exp (test_print_all_chars): Wrap tests with
with_target_charset.
(test_print_strings): Likewise.
(test_repeat_bytes): Likewise.
* gdb.base/setvar.exp: Set target-charset to ASCII temporarily
for some tests.
Install some sanity checks that sibling DIE offsets are not beyond the
defined limits of the DWARF input buffer in read_partial_die and skip_one_die.
2014-03-20 Keith Seitz <keiths@redhat.com>
PR gdb/15827
* dwarf2read.c (skip_one_die): Check that all relative-offset
sibling DIEs fall within range of the current reader's buffer.
(read_partial_die): Likewise.
2014-03-20 Keith Seitz <keiths@redhat.com>
PR gdb/15827
* gdb.dwarf2/corrupt.c: New file.
* gdb.dwarf2/corrupt.exp: New file.
[forgot to commit/push these with previous push]
If lookup_symbol_file tries to locate a member variable with NULL name:
/* A simple lookup failed. Check if the symbol was defined in
a base class. */
cleanup = make_cleanup (null_cleanup, NULL);
/* Find the name of the class and the name of the method,
variable, etc. */
prefix_len = cp_entire_prefix_len (name);
/* If no prefix was found, search "this". */
if (prefix_len == 0)
{
struct type *type;
struct symbol *this;
this = lookup_language_this (language_def (language_cplus), block);
if (this == NULL)
{
do_cleanups (cleanup);
return NULL;
}
type = check_typedef (TYPE_TARGET_TYPE (SYMBOL_TYPE (this)));
klass = xstrdup (TYPE_NAME (type));
nested = xstrdup (name);
}
TYPE_NAME (type) is NULL, so xstrdup (NULL) and boom!
This can happen, e.g., with clang++. See testsuite/gdb.cp/namelessclass.exp
or the bugzilla report.
This patch simply adds a fencepost against this case, allowing the caller
of lookup_symbol_file to search other blocks for the right symbol.
* lib/gdbserver-support.exp (gdbserver_default_get_remote_address):
Add comment.
(gdbserver_default_get_comm_port): New function.
(gdbserver_start): Check if board file provided
"gdbserver,get_comm_port" and use it if so.
* boards/native-stdio-gdbserver.exp (sockethost): Set to "".
(gdb,socketport): Set to "stdio".
(gdbserver,get_comm_port): Set to ${board}_get_comm_port.
(stdio_gdbserver_template): Delete.
(${board}_get_remote_address): Update.
(${board}_build_remote_cmd): Delete.
(${board}_get_comm_port): New function.
(${board}_spawn): Update.
* boards/remote-stdio-gdbserver.exp (${board}_build_remote_cmd):
Delete.
(${board}_get_remote_address): Update.
(${board}_get_comm_port): New function.
https://sourceware.org/ml/gdb-patches/2014-04/msg00210.html
Improve the regexp used in the memattr.exp test so allow for different
memory regions (.data / .bss) being laid out in different orders.
gdb/testsuite/ChangeLog:
* gdb.base/memattr.exp: Improve regexps to handle memory regions
appearing in any order.
This test uses a simple custom elf loader, implemented in
gdb.base/sym-file-loader.h|c. This loader doesn't have a dlclose-like
function today, but I'll need one. But, I found that the guts of the
loader are exposed too much to the client, making the interface more
complicated than necessary. It's simpler if the loader just exports a
few dlopen/dlsym -style functions. That's what this patch does.
Tested on x86_86 Fedora 17, native and gdbserver.
gdb/testsuite/
2014-04-15 Pedro Alves <palves@redhat.com>
* gdb.base/sym-file-loader.h: Move inclusion of <inttypes.h>,
<ansidecl.h>, <elf/common.h> and <elf/external.h> to
sym-file-loader.c.
(Elf_External_Phdr, Elf_External_Ehdr, Elf_External_Shdr)
(Elf_External_Sym, Elf_Addr, GET, GETADDR, struct segment): Move
to sym-file-loader.c.
(struct library): Forward declare.
(load_shlib, lookup_function): Change prototypes.
(find_shstrtab, find_strtab, find_shdr, find_symtab)
(translate_offset): Remove declarations.
(get_text_addr): New declaration.
* gdb.base/sym-file-loader.c: Move inclusion of <inttypes.h>,
<ansidecl.h>, <elf/common.h> and <elf/external.h> here from
sym-file-loader.h.
(Elf_External_Phdr, Elf_External_Ehdr, Elf_External_Shdr)
(Elf_External_Sym, Elf_Addr, GET, GETADDR, struct segment): Move
here from sym-file-loader.h.
(struct library): New structure.
(load_shlib, lookup_function): Change prototypes and adjust to
work with a struct library.
(find_shstrtab, find_strtab, find_shdr, find_symtab)
(translate_offset): Make static.
(get_text_addr): New function.
* gdb.base/sym-file-main.c (main): Adjust to new loader interface.
SELF_LINK, not SELK_LINK...
gdb/testsuite/
2014-04-15 Pedro Alves <palves@redhat.com>
* gdb.base/sym-file-loader.c: Fix typo. SELF_LINK, not SELK_LINK.
The main issue here is that this test passes the host's absolute path
to the library to load to the "dlopen"-like routine, which doesn't
work when either the target or the host are remote, unless a shared
filesystem has been set up.
Tests that dynamically load a library solve this by dlopen'ing by
basename, and setting rpath to $ORIGIN. See gdb_compile.
This test doesn't use dlopen, but instead uses its own simple elf
loader. The fix is to pass this loader the library basename, and
teach it to look up the library by basename in the executable's
directory as well, i.e., assuming/emulating RPATH=$ORIGIN.
Tested on x86_64 Fedora 17, native and gdbserver.
I looked around in the web to figure out Linux's /proc/self/exe
equivalents in other ELF OSs. I think I covered all relevant, but if
not, I think it'll be simple enough to add more. (Note the test is
skipped on non-ELF targets.)
Tested on x86_64 Fedora 17, native and gdbserver.
gdb/testsuite/
2014-04-15 Pedro Alves <palves@redhat.com>
* gdb.base/sym-file-loader.c: Include <limits.h>.
(SELF_LINK): New define.
(get_origin): New function.
(load_shlib): Use it.
* gdb.base/sym-file.exp: Don't early return if the target is
remote. Use runto_main, and issue fail is that fails. Use
gdb_load_shlibs.
(shlib_name): Delete.
(lib_so, lib_syms, lib_dlopen): New globals. Use them throughout.
Remove regex characters from test message, and don't refer to
breakpoint numbers in test messages (subsequent patches will add more
breakpoints, changing these numbers). Result:
-PASS: gdb.base/sym-file.exp: add-symbol-file .*sym-file-lib\.so addr
+PASS: gdb.base/sym-file.exp: add-symbol-file sym-file-lib.so addr
-PASS: gdb.base/sym-file.exp: check if Breakpoint 2 is pending.
-PASS: gdb.base/sym-file.exp: check if Breakpoint 3 is pending.
+PASS: gdb.base/sym-file.exp: breakpoint at foo is pending
+PASS: gdb.base/sym-file.exp: breakpoint at bar is pending
gdb/testsuite/
2014-04-15 Pedro Alves <palves@redhat.com>
* gdb.base/sym-file.exp: Remove regex characters from test
message. Don't refer to breakpoint numbers in test messages.
PR c++/16253.
symbol_matches_domain was permitting searches for a VAR_DOMAIN
symbol to also match STRUCT_DOMAIN symbols for languages like C++
where STRUCT_DOMAIN symbols also define a typedef of the same name,
e.g., "struct foo {}" introduces a typedef of the name "foo".
Problems occur if there exists both a VAR_DOMAIN and STRUCT_DOMAIN
symbol of the same name. Then it is essentially a race between which
symbol is found first. The other symbol is obscurred.
[This is a relatively common idiom: enum e { ... } e;]
This patchset moves this "language defines a typedef" logic to
lookup_symbol[_in_language], looking first for a symbol in the given
domain and falling back to searching STRUCT_DOMAIN when/if appropriate.
2014-04-14 Keith Seitz <keiths@redhat.com>
PR c++/16253
* ada-lang.c (ada_symbol_matches_domain): Moved here and renamed
from symbol_matches_domain in symtab.c. All local callers
of symbol_matches_domain updated.
(standard_lookup): If DOMAIN is VAR_DOMAIN and no symbol is found,
search STRUCT_DOMAIN.
(ada_find_any_type_symbol): Do not search STRUCT_DOMAIN
independently. standard_lookup will do that automatically.
* cp-namespace.c (cp_lookup_symbol_nonlocal): Explain when/why
VAR_DOMAIN searches may return a STRUCT_DOMAIN match.
(cp_lookup_symbol_in_namespace): Likewise.
If no VAR_DOMAIN symbol is found, search STRUCT_DOMAIN.
(cp_lookup_symbol_exports): Explain when/why VAR_DOMAIN searches
may return a STRUCT_DOMAIN match.
(lookup_symbol_file): Search for the class name in STRUCT_DOMAIN.
* cp-support.c: Include language.h.
(inspect_type): Explicitly search STRUCT_DOMAIN before searching
VAR_DOMAIN.
* psymtab.c (match_partial_symbol): Compare the requested
domain with the symbol's domain directly.
(lookup_partial_symbol): Likewise.
* symtab.c (lookup_symbol_in_language): Explain when/why
VAR_DOMAIN searches may return a STRUCT_DOMAIN match.
If no VAR_DOMAIN symbol is found, search STRUCT_DOMAIN for
appropriate languages.
(symbol_matches_domain): Renamed `ada_symbol_matches_domain'
and moved to ada-lang.c
(lookup_block_symbol): Explain that this function only returns
symbol matching the requested DOMAIN.
Compare the requested domain with the symbol's domain directly.
(iterate_over_symbols): Compare the requested domain with the
symbol's domain directly.
* symtab.h (symbol_matches_domain): Remove.
2014-04-14 Keith Seitz <keiths@redhat.com>
PR c++/16253
* gdb.cp/var-tag.cc: New file.
* gdb.cp/var-tag.exp: New file.
* gdb.dwarf2/dw2-ada-ffffffff.exp: Set the language to C++.
* gdb.dwarf2/dw2-anon-mptr.exp: Likewise.
* gdb.dwarf2/dw2-double-set-die-type.exp: Likewise.
* gdb.dwarf2/dw2-inheritance.exp: Likewise.
This adds support for the C++11 "enum class" feature. This is
PR c++/15246.
I chose to use the existing TYPE_DECLARED_CLASS rather than introduce
a new type code. This seemed both simple and clear to me.
I made overloading support for the new enum types strict. This is how
it works in C++; and it didn't seem like an undue burden to keep this,
particularly because enum constants are printed symbolically by gdb.
Built and regtested on x86-64 Fedora 20.
2014-04-14 Tom Tromey <tromey@redhat.com>
PR c++/15246:
* c-exp.y (type_aggregate_p): New function.
(qualified_name, classify_inner_name): Use it.
* c-typeprint.c (c_type_print_base): Handle TYPE_DECLARED_CLASS
and TYPE_TARGET_TYPE of an enum type.
* dwarf2read.c (read_enumeration_type): Set TYPE_DECLARED_CLASS on
an enum type.
(determine_prefix) <case DW_TAG_enumeration_type>: New case;
handle TYPE_DECLARED_CLASS.
* gdbtypes.c (rank_one_type): Handle TYPE_DECLARED_CLASS on enum
types.
* gdbtypes.h (TYPE_DECLARED_CLASS): Update comment.
* valops.c (enum_constant_from_type): New function.
(value_aggregate_elt): Use it.
* cp-namespace.c (cp_lookup_nested_symbol): Handle
TYPE_CODE_ENUM.
2014-04-14 Tom Tromey <tromey@redhat.com>
* gdb.cp/classes.exp (test_enums): Handle underlying type.
* gdb.dwarf2/enum-type.exp: Add test for enum with underlying
type.
* gdb.cp/enum-class.exp: New file.
* gdb.cp/enum-class.cc: New file.
DWARF allows an enumeration type to have a DW_AT_type. GDB doesn't
recognize this, but there is a patch to change GCC to emit it, and a
DWARF proposal to further allow an enum type with a DW_AT_type to omit
the DW_AT_byte_size. This patch changes gdb to implement this.
Built and regtested on x86-64 Fedora 20.
2014-04-14 Tom Tromey <tromey@redhat.com>
* dwarf2read.c (read_enumeration_type): Handle DW_AT_type.
2014-04-14 Tom Tromey <tromey@redhat.com>
* gdb.dwarf2/enum-type.exp: New file.
The dwarf attribute DW_AT_count specifies the elements of a subrange.
This test covers subranges with present count but absent upper bound
attribute, both with static and dynamic attribute values.
testsuite/ChangeLog:
* gdb.dwarf2/count.exp: New file.
The c99 standard in "6.5.3.4 The sizeof operator" states:
If the type of the operand is a variable length array type, the operand
is evaluated;[...]
This patch mirrors the following c99 semantic in gdb:
1| int vla[n][m];
2| int i = 1;
3| sizeof(vla[i++][0]); // No sideffect
4| assert (i == 1);
5| sizeof(vla[i++]); // With sideffect
6| assert (i == 2);
Note: ptype/whatis still do not allow any sideeffects.
This patch was motivated by:
https://sourceware.org/ml/gdb-patches/2014-01/msg00732.html
gdb/ChangeLog:
* eval.c (evaluate_subexp_for_sizeof): Add enum noside argument.
(evaluate_subexp_standard): Pass noside argument.
(evaluate_subexp_for_sizeof) <BINOP_SUBSCRIPT>: Handle subscript case
if noside equals EVAL_NORMAL. If the subscript yields a vla type
re-evaluate subscript operation with EVAL_NORMAL to enable sideffects.
* gdbtypes.c (resolve_dynamic_bounds): Mark bound as evaluated.
* gdbtypes.h (enum range_flags): Add RANGE_EVALUATED case.
testsuite/ChangeLog:
* gdb.base/vla-sideeffect.c: New file.
* gdb.base/vla-sideeffect.exp: New file.
Clang defaults this warning to an error, breaking the build & causing
these tests not to run.
gdb/testsuite/
* gdb.mi/non-stop.c: Add return value for non-void function return
statement.
* gdb.threads/staticthreads.c: Ditto.
* guile/scm-value.c (gdbscm_value_dynamic_type): Use coerce_ref to
dereference TYPE_CODE_REF values.
testsuite/
* gdb.guile/scm-value.c: Improve test case.
* gdb.guile/scm-value.exp: Add new test.
This reverts the following patch series, as they cause some regresssions.
commit 37c1ab67a3
type: add c99 variable length array support
gdb/
* dwarf2loc.c (dwarf2_locexpr_baton_eval): New function.
(dwarf2_evaluate_property): New function.
* dwarf2loc.h (dwarf2_evaluate_property): New function prototype.
* dwarf2read.c (attr_to_dynamic_prop): New function.
(read_subrange_type): Use attr_to_dynamic_prop to read high bound
attribute.
* gdbtypes.c: Include dwarf2loc.h.
(is_dynamic_type): New function.
(resolve_dynamic_type): New function.
(resolve_dynamic_bounds): New function.
(get_type_length): New function.
(check_typedef): Use get_type_length to compute type length.
* gdbtypes.h (TYPE_HIGH_BOUND_KIND): New macro.
(TYPE_LOW_BOUND_KIND): New macro.
(is_dynamic_type): New function prototype.
* value.c (value_from_contents_and_address): Call resolve_dynamic_type
to resolve dynamic properties of the type. Update comment.
* valops.c (get_value_at, value_at, value_at_lazy): Update comment.
commit 26cb189f8b
vla: enable sizeof operator to work with variable length arrays
gdb/
* eval.c (evaluate_subexp_for_sizeof) <OP_VAR_VALUE>: If the type
passed to sizeof is dynamic evaluate the argument to compute the length.
commit 04b19544ef
vla: enable sizeof operator for indirection
gdb/
* eval.c (evaluate_subexp_for_sizeof) <UNOP_IND>: Create an indirect
value and retrieve the dynamic type size.
commit bcd629a44f
vla: update type from newly created value
gdb/
* ada-lang.c (ada_value_primitive_packed_val): Re-fetch type from value.
(ada_template_to_fixed_record_type_1): Likewise.
(ada_to_fixed_type_1): Likewise.
* cp-valprint.c (cp_print_value_fields_rtti): Likewise.
(cp_print_value): Likewise.
* d-valprint.c (dynamic_array_type): Likewise.
* eval.c (evaluate_subexp_with_coercion): Likewise.
* findvar.c (address_of_variable): Likewise.
* jv-valprint.c (java_value_print): Likewise.
* valops.c (value_ind): Likewise.
* value.c (coerce_ref): Likewise.
commit b86138fb04
vla: print "variable length" for unresolved dynamic bounds
gdb/
* c-typeprint.c (c_type_print_varspec_suffix): Added
check for not yet resolved high bound. If unresolved, print
"variable length" string to the console instead of random
length.
commit e1969afbd4
vla: support for DW_AT_count
gdb/
* dwarf2read.c (read_subrange_type): Convert DW_AT_count to a dynamic
property and store it as the high bound and flag the range accordingly.
* gdbtypes.c (resolve_dynamic_bounds): If range is flagged as
RANGE_UPPER_BOUND_IS_COUNT assign low + high - 1 as the new high bound.
* gdbtypes.h (enum range_flags): New enum.
(struct range_bounds): Add flags member.
commit 92b09522dc
vla: resolve dynamic bounds if value contents is a constant byte-sequence
gdb/
* findvar.c (default_read_var_value): Resolve dynamic bounds if location
points to a constant blob.
commit 3bce82377f
vla: evaluate operand of sizeof if its type is a vla
gdb/
* eval.c (evaluate_subexp_for_sizeof): Add enum noside argument.
(evaluate_subexp_standard): Pass noside argument.
(evaluate_subexp_for_sizeof) <BINOP_SUBSCRIPT>: Handle subscript case
if noside equals EVAL_NORMAL. If the subscript yields a vla type
re-evaluate subscript operation with EVAL_NORMAL to enable sideffects.
* gdbtypes.c (resolve_dynamic_bounds): Mark bound as evaluated.
* gdbtypes.h (enum range_flags): Add RANGE_EVALUATED case.
gdb/testsuite
* gdb.base/vla-sideeffect.c: New file.
* gdb.base/vla-sideeffect.exp: New file.
commit 504f34326e
test: cover subranges with present DW_AT_count attribute
gdb/testsuite/
* gdb.dwarf2/count.exp: New file.
commit 1a237e0ee5
test: multi-dimensional c99 vla.
gdb/testsuite/
* gdb.base/vla-multi.c: New file.
* gdb.base/vla-multi.exp: New file.
commit 024e13b46f
test: evaluate pointers to C99 vla correctly.
gdb/testsuite/
* gdb.base/vla-ptr.c: New file.
* gdb.base/vla-ptr.exp: New file.
commit c8655f75e2
test: basic c99 vla tests for C primitives
gdb/testsuite/
* gdb.base/vla-datatypes.c: New file.
* gdb.base/vla-datatypes.exp: New file.
commit 58a84dcf29
test: add mi vla test
gdb/testsuite/
* gdb.mi/mi-vla-c99.exp: New file.
* gdb.mi/vla.c: New file.
The dwarf attribute DW_AT_count specifies the elements of a subrange.
This test covers subranges with present count but absent upper bound
attribute, both with static and dynamic attribute values.
testsuite:
* gdb.dwarf2/count.exp: New file.
The c99 standard in "6.5.3.4 The sizeof operator" states:
If the type of the operand is a variable length array type, the operand
is evaluated;[...]
This patch mirrors the following c99 semantic in gdb:
1| int vla[n][m];
2| int i = 1;
3| sizeof(vla[i++][0]); // No sideffect
4| assert (i == 1);
5| sizeof(vla[i++]); // With sideffect
6| assert (i == 2);
Note: ptype/whatsis still do not allow any sideeffects.
This patch was motivated by:
https://sourceware.org/ml/gdb-patches/2014-01/msg00732.html
* eval.c (evaluate_subexp_for_sizeof): Add enum noside argument.
(evaluate_subexp_standard): Pass noside argument.
(evaluate_subexp_for_sizeof) <BINOP_SUBSCRIPT>: Handle subscript case
if noside equals EVAL_NORMAL. If the subscript yields a vla type
re-evaluate subscript operation with EVAL_NORMAL to enable sideffects.
* gdbtypes.c (resolve_dynamic_bounds): Mark bound as evaluated.
* gdbtypes.h (enum range_flags): Add RANGE_EVALUATED case.
testsuite/gdb.base/
* vla-sideeffect.c: New file.
* vla-sideeffect.exp: New file.
Doug told me that there are some regressions in gdb.base/completion.exp.
They are caused by my recent change, and can be reproduced via:
$ make check-parallel TESTS=gdb.base/completion.exp
FAIL: gdb.base/completion.exp: complete target core ./gdb.base/completion
FAIL: gdb.base/completion.exp: complete target tfile ./gdb.base/completion
FAIL: gdb.base/completion.exp: complete target exec ./gdb.base/completion
Current tests assume that gdb.base/completion exists but that is wrong
in a parallel run, because binary file and object files are placed
in outputs/gdb.base/completion/.
This patch is to check file exists on two candidate directories,
"gdb.base" and "outputs/gdb.base/completion/", and run tests with files
existed in either of them.
gdb/testsuite:
2014-04-11 Yao Qi <yao@codesourcery.com>
* gdb.base/completion.exp: Check file exists before running tests
on file completion.
While trying to fix hbreak2.exp against GDBserver I noticed this...
(gdb) hbreak main if 1
Sending packet: $m400580,40#2e...Packet received: e8d2ffffff5dc3554889e54883ec10c745fc00000000eb0eb800000000e8c1ffffff8345fc01817dfce70300007ee9b800000000c9c3662e0f1f840000000000
Sending packet: $m40058f,1#31...Packet received: c7
Hardware assisted breakpoint 1 at 0x40058f: file ../../../src/gdb/testsuite/gdb.base/break-idempotent.c, line 46.
Sending packet: $Z1,40058f,1;X3,220127#9b...
*hangs forever*
The issue is that nothing advances the packet pointer if
add_breakpoint_condition either fails to parse the agent expression,
or fails to find the breakpoint, resulting in an infinite loop in
process_point_options. The latter case should really be fixed by
GDBserver tracking GDB Z1 breakpoints in its breakpoint structures
like Z0 breakpoints are, but the latter case still needs handling.
add_breakpoint_commands has the same issue, though at present I don't
know any way to trigger it other than sending a manually cooked
packet.
Unbelievably, it doesn't look like we have any test that tries setting
a conditional hardware breakpoint. Looking at cond-eval-mode.exp, it
looks like the file was meant to actually test something, but it's
mostly empty today. This patch adds tests that tries all sorts of
conditional breakpoints and watchpoints. The test hangs/fails without
the GDBserver fix.
Tested on x86_64 Fedora 17.
gdb/gdbserver/
2014-04-10 Pedro Alves <palves@redhat.com>
* mem-break.c (add_breakpoint_condition, add_breakpoint_commands):
Check if the condition or command is NULL before checking if the
breakpoint is known. On success, return true.
* mem-break.h (add_breakpoint_condition): Document return.
(add_breakpoint_commands): Add describing comment.
* server.c (skip_to_semicolon): New function.
(process_point_options): Use it.
gdb/testsuite/
2014-04-10 Pedro Alves <palves@redhat.com>
* gdb.base/cond-eval-mode.c: New file.
* gdb.base/cond-eval-mode.exp: Use standard_testfile. Adjust
prepare_for_testing to build the new file. Check result of
runto_main.
(test_break, test_watch): New procedures.
(top level): Use them.
David Blaikie