A small number of tests incorrectly tried to pass -Wa,-g through to
GCC as an extra compile time flag, either to gdb_compile or
prepare_for_testing.
The problem is that the syntax used for passing the flags was
incorrect, and as a result these extra flags were being ignored.
Luckily, the 'debug' flag was being passed in each case anyway, which
means that the '-g' flag would already be added.
Given that all these tests pass 'debug', and the invalid flag has been
ignored for some time, I'm just removing the flags in this commit.
I've also changed the tests from using gdb_compile to
prepare_for_testing, which allows some extra code to be removed from a
couple of tests scripts.
There should be no change in the test results after this commit.
gdb/testsuite/ChangeLog:
* gdb.arch/amd64-disp-step-avx.exp: Remove unneeded assembler flag
option, syntax was wrong anyway.
* gdb.arch/arm-disp-step.exp: Likewise.
* gdb.arch/sparc64-regs.exp: Likewise.
* gdb.arch/amd64-disp-step.exp: Remove unneeded assembler flag
option, syntax was wrong anyway, switch to use
prepare_for_testing.
* gdb.arch/i386-disp-step.exp: Likewise.
This removes some cleanups from record-full.c in a straightforward
way.
Tested by the buildbot.
gdb/ChangeLog
2018-03-22 Tom Tromey <tom@tromey.com>
* record-full.c (record_full_exec_insn): Use gdb::byte_vector.
(record_full_goto_bookmark): Use std::string.
This patch merges the masks for matching the stwux and stdux
instructions in rs6000-tdep.c:skip_prologue into a single mask that
only matches these two instructions.
Commit 72dd273062 fixed the warning described in PR tdep/18295, this
patch addresses the comment in the same PR indicating that the mask
was too permissive.
gdb/Changelog:
PR tdep/18295
* rs6000-tdep.c (skip_prologue): Match both stwux and stdux
a single mask.
This patch extends rs6000-tdep.c:skip_prologue so that it can detect
when the Link Register is saved using the frame pointer (usually r31)
in adition to the stack pointer (r1).
The frame pointer offset from the frame base is tracked separately
from the stack pointer offset for cases when the frame pointer is not
in synch with the stack pointer at the moment of the LR save.
Previously, "stq" could also be detected as an instruction that saves
LR or CR. Because this was likely unintentional, this patch also
restricts the matches to stw/stwu/std/stdu.
gdb/ChangeLog:
* rs6000-tdep.c (store_insn_p): New function.
(skip_prologue): New variable alloca_reg_offset. Set lr_reg
and cr_reg to their unshifted values. Use store_insn_p to
match LR saves using either R1 or fdata->alloca_reg. Use
store_insn_p to match CR saves. Set alloca_reg_offset
when alloca_reg and framep are set. Remove lr_reg shift
when assigning to fdata->lr_register.
Currently "info proc cmdline" on GNU/Linux does not show the full command
line, but only argument 0. And even a warning is shown if there are more.
This was discussed in 2014 already:
https://sourceware.org/ml/gdb-patches/2014-04/msg00212.html
Follow the advice there and avoid target_fileio_read_stralloc. Instead,
use target_fileio_read_alloc to read the whole command line and then
replace NUL characters by spaces. Also add an appropriate test case.
Note that gdbserver already handles this correctly.
gdb/ChangeLog:
* linux-tdep.c (linux_info_proc): For "info proc cmdline", print
command line args instead of emitting a warning.
gdb/testsuite/ChangeLog:
* gdb.base/info-proc.exp: Add test for "info proc cmdline".
This corrects bad formatting in the newly introduced function
s390_get_wordsize.
gdb/gdbserver/ChangeLog:
* linux-s390-low.c (s390_get_wordsize): Correct brace style.
A few of them were missed in commit 7ac2002247 ("x86: derive DispN
from BaseIndex") and also couldn't be removed by subsequent commits
touching certain templates anyway.
Since they're shorter to encode, the 0xa0...0xa3 encodings are preferred
for moves between accumulator and absolute address outside of 64-bit
mode. With HLE release semantics this encoding is unsupported though,
with the assembler raising an error. The operation is valid though, we
merely need to pick the longer encoding in that case.
The wrong placement of the Load attribute in the templates prevented
this from working. The disassembler also didn't handle this consistently
with other similar dual-encoding insns.
While many templates allowing multiple suitably matching XMM/YMM/ZMM
operand sizes can be folded, a few need to be split in order to not
wrongly accept "xmmword ptr" operands when only XMM registers are
permitted (and memory operands are more narrow). Add a test case
validating this.
This patch replaces VEC(static_tracepoint_marker_p) with std::vector,
and does some c++ification around that. I thought a new overload of
hex2str was useful, so I added it as well as corresponding unit tests.
I also added an overload of ui_out::field_string that takes an
std::string directly.
gdb/ChangeLog:
* tracepoint.h (struct static_tracepoint_marker): Initialize
fields, define default constructor, move constructor and move
assignment, disable the rest.
<str_id, extra>: Make std::string.
(release_static_tracepoint_marker): Remove.
(free_current_marker): Remove.
* tracepoint.c (free_current_marker): Remove.
(parse_static_tracepoint_marker_definition): Adjust to
std::string, use new hex2str overload.
(release_static_tracepoint_marker): Remove.
(print_one_static_tracepoint_marker): Get marker by reference
and adjust to std::string.
(info_static_tracepoint_markers_command): Adjust to std::vector
changes
* target.h (static_tracepoint_marker_p): Remove typedef.
(DEF_VEC_P(static_tracepoint_marker_p)): Remove.
(struct target_ops) <to_static_tracepoint_marker_at>: Return
bool.
<to_static_tracepoint_markers_by_strid>: Return std::vector.
* target-debug.h
(target_debug_print_VEC_static_tracepoint_marker_p_p): Remove.
(target_debug_print_std_vector_static_tracepoint_marker): New.
(target_debug_print_struct_static_tracepoint_marker_p): Rename
to...
(target_debug_print_static_tracepoint_marker_p): ... this.
* target-delegates.c: Re-generate.
* breakpoint.h (struct tracepoint) <static_trace_marker_id>:
Make std::string.
* breakpoint.c (init_breakpoint_sal): Adjust to std::string.
(decode_static_tracepoint_spec): Adjust to std::vector.
(tracepoint_print_one_detail): Adjust to std::string.
(strace_marker_decode_location): Adjust to std::string.
(update_static_tracepoint): Adjust to std::string, remove call
to release_static_tracepoint_marker.
* linux-nat.c (linux_child_static_tracepoint_markers_by_strid):
Adjust to std::vector.
* remote.c (remote_static_tracepoint_marker_at): Return bool.
(remote_static_tracepoint_markers_by_strid): Adjust to
std::vector.
* common/rsp-low.h (hex2str): New overload with explicit count
of bytes.
* common/rsp-low.c (hex2str): New overload with explicit count
of bytes.
* unittests/rsp-low-selftests.c (test_hex2str): New function.
(_initialize_rsp_low_selftests): Add test_hex2str test.
* unittests/tracepoint-selftests.c
(test_parse_static_tracepoint_marker_definition): Adjust to
std::string.
Since I modify the parse_static_tracepoint_marker_definition function in
the next patch, I wanted to write a unit test for it. Doing so showed
that it doesn't handle multiple consecutive static tracepoint
definitions separated by commas. However, the RSP documentation [1]
states that servers may return multiple definitions, like:
1234:6d61726b657231:6578747261207374756666,abba:6d61726b657232:
The problem is that the function uses strlen to compute the length of
the last field (the extra field). If there are additional definitions
in addition to the one we are currently parsing, the returned length
will include those definitions, and we'll try to hex-decode past the
extra field.
This patch changes parse_static_tracepoint_marker_definition to consider
the case where the current definition is followed by a comma and more
definitions. It also adds the unit test that found the issue in the
first place.
I don't think this causes any backwards compatibility issues, because
the previous code only handled single static tracepoint definitions, and
the new code handles that correctly.
gdb/ChangeLog:
* tracepoint.c (parse_static_tracepoint_marker_definition):
Consider case where the definition is followed by more
definitions.
* Makefile.in (SUBDIR_UNITTESTS_SRCS): Add
tracepoint-selftests.c.
* unittests/tracepoint-selftests.c: New.
[1] https://sourceware.org/gdb/onlinedocs/gdb/Tracepoint-Packets.html#qTfSTM
The following bits in DT_FLAGS_1 are used by Solaris:
#define DF_1_KMOD 0x10000000 /* kernel module */
#define DF_1_WEAKFILTER 0x20000000 /* apply weak binding to DT_FILTER */
#define DF_1_NOCOMMON 0x40000000 /* no COMMON symbols exist */
binutils/
* readelf.c (process_dynamic_section): Also dump DF_1_KMOD,
DF_1_WEAKFILTER and DF_1_NOCOMMON.
include/
* elf/common.h (DF_1_KMOD): New.
(DF_1_WEAKFILTER): Likewise.
(DF_1_NOCOMMON): Likewise.
The in-process agent does not handle tdescs with guarded storage yet.
This is fixed.
gdb/gdbserver/ChangeLog:
* linux-s390-ipa.c (get_ipa_tdesc): Add handling for
S390_TDESC_GS.
* linux-s390-low.c (s390_get_ipa_tdesc_idx): Likewise.
(initialize_low_tracepoint): Call init_registers_s390x_gs_linux64
and init_registers_s390_gs_linux64.
On S390, the guarded storage register set is only valid if guarded storage
is active. Reading/writing the register set yields errors if this is not
the case. Then gdbserver emits warnings like these:
Warning: ptrace(regsets_store_inferior_registers): No data available
Apart from confusing the user, this can also lead to test case failures
due to unexpected output. To suppress this, make the guarded storage
regsets read-only for now.
gdb/gdbserver/ChangeLog:
* linux-s390-low.c (s390_fill_gs): Remove function.
(s390_fill_gsbc): Remove function.
(s390_regsets): Set fill functions for the guarded storage regsets
to NULL.
On s390x, when running attach.exp with native-extended-gdbserver,
gdbserver crashes in find_regno like this:
.../regcache.c:252: A problem internal to GDBserver has been detected.
Unknown register tdb0 requested
On the GDB side it looks like this:
(gdb) attach 31568
Attaching to process 31568
Remote connection closed
The test case attempts to attach to a new process via the already running
gdbserver. Thus s390_arch_setup is called a second time, and that's where
the problem occurs. In order to determine the word width (32 or 64 bits),
s390_arch_setup reads the pswm register through the regcache. For that it
uses a temporary tdesc which is supposed to work for all s390 targets,
since the actual tdesc has not been determined yet. But in this second
round this doesn't work, because s390_regsets has been updated already and
now contains regsets not described by the temporary tdesc, such as the one
containing tdb0.
This is fixed by rearranging the logic in s390_arch_setup.
gdb/gdbserver/ChangeLog:
* linux-s390-low.c (s390_get_hwcap): Replace tdesc parameter by
the word size. Add comment.
(s390_get_wordsize): New function.
(s390_arch_setup): No longer select a temporary tdesc to fetch the
pswm with it. Instead, use s390_get_wordsize to determine the
word size first and derive the correct tdesc from that directly.
STT_FILE and a bunch of other symbol types aren't proper symbols to
mark the start of a function's code.
* elf64-ppc.c (ppc64_elf_get_synthetic_symtab): Trim uninteresting
symbols. Use size_t counts. Delete redundant opd test.
* elf32-ppc.c (struct ppc_elf_link_hash_entry): Make tls_mask
field unsigned.
(update_local_sym_info): Likewise for local_got_tls_masks.
(ppc_elf_tls_optimize): Likewise for lgot_masks.
Commit f15d0b545b trimmed some unnecessary TPREL relocs, but missed
changing another place where they are allocated.
* elf64-ppc.c (ppc_size_one_stub): Fix comment typo.
(ppc64_elf_layout_multitoc): Allocate relocs for tprel as we
do in size_dynamic_sections.
This patch fixes a compile error introduced by my previous change, which
caused the indentation of the following code block to become incorrect.
ChangeLog:
2018-03-20 Stephen Roberts <stephen.roberts@arm.com>
* gdb/symtab.c (find_pc_sect_line): fixed indentation.
This patch addresses slowness when setting breakpoints, especially in
heavily templatized code. Profiling showed that find_pc_sect_line in
symtab.c was the performance bottleneck. The original logic performed a
linear search over ordered data. This patch uses a binary search, as
suggested by comments around the function. There are no behavioural
changes, but gdb is now faster at setting breakpoints in template code.
Tested using on make check on an x86 target. The optimisation speeds up
the included template-breakpoints.py performance test by a factor of 7
on my machine.
ChangeLog:
2018-03-20 Stephen Roberts <stephen.roberts@arm.com>
* gdb/symtab.c (find_pc_sect_line): now uses binary search.
gdb/testsuite/
* gdb.perf/template-breakpoints.cc: New file.
* gdb.perf/template-breakpoints.exp: New file.
* gdb.perf/template-breakpoints.py: New file.
Complement commit 8988502d75 ("MIPS/LD/testsuite: Correct dynamic
links with VR4100, VR4300 and VR5000") and commit bf48520113 ("gc.exp:
Fix a typo: $LFLAGS -> $LDFLAGS"), and remove extraneous additional LD
flags explicitly passed to the personality test on invocation. This
passing has accidentally leaked from a WIP version of the former change.
With the actual version committed the $LDFLAGS global variable is used
instead for `run_dump_test' to use implicitly, so that `-call_shared'
precedes `-lpersonality' on the linker's command line, as otherwise a
shared `libpersonality.so' library wouldn't be considered for linking,
causing the test to fail.
ld/
* testsuite/ld-gc/gc.exp: Remove extraneous LD flags from the
personality test.
If a symbol is made dynamic by --dynamic-list, it has non-IR reference.
bfd/
PR ld/22983
* elflink.c (bfd_elf_link_mark_dynamic_symbol): Set
non_ir_ref_dynamic if a symbol is made dynamic by --dynamic-list.
ld/
PR ld/22983
* testsuite/ld-plugin/lto.exp: Run PR ld/22983 test.
* testsuite/ld-plugin/pr22983.d: New file.
* testsuite/ld-plugin/pr22983.t: Likewise.
* testsuite/ld-plugin/pr22983a.c: Likewise.
* testsuite/ld-plugin/pr22983b.c: Likewise.
In Rust one can initialize a struct member from an identically-named
local variable by simply mentioning the member name in the
initializer, like:
let x = 0;
let y = Struct { x };
This initializes "Struct::x" from "x".
This patch adds this form of initializer to the Rust expression parser
and adds a test.
Tested on x86-64 Fedora 26 using rustc 1.23.
2018-03-19 Tom Tromey <tom@tromey.com>
* rust-exp.y (struct_expr_tail, struct_expr_list): Add plain
"IDENT" production.
2018-03-19 Tom Tromey <tom@tromey.com>
* gdb.rust/simple.rs (main): Add local variables field1, field2,
y0.
* gdb.rust/simple.exp: Test bare identifier form of struct
initializer.
This converts observers from using a special source-generating script
to be plain C++. This version of the patch takes advantage of C++11
by using std::function and variadic templates; incorporates Pedro's
patches; and renames the header file to "observable.h" (this change
eliminates the need for a clean rebuild).
Note that Pedro's patches used a template lambda in tui-hooks.c, but
this failed to compile on some buildbot instances (presumably due to
differing C++ versions); I replaced this with an ordinary template
function.
Regression tested on the buildbot.
gdb/ChangeLog
2018-03-19 Pedro Alves <palves@redhat.com>
Tom Tromey <tom@tromey.com>
* unittests/observable-selftests.c: New file.
* common/observable.h: New file.
* observable.h: New file.
* ada-lang.c, ada-tasks.c, agent.c, aix-thread.c, annotate.c,
arm-tdep.c, auto-load.c, auxv.c, break-catch-syscall.c,
breakpoint.c, bsd-uthread.c, cli/cli-interp.c, cli/cli-setshow.c,
corefile.c, dummy-frame.c, event-loop.c, event-top.c, exec.c,
extension.c, frame.c, gdbarch.c, guile/scm-breakpoint.c,
infcall.c, infcmd.c, inferior.c, inflow.c, infrun.c, jit.c,
linux-tdep.c, linux-thread-db.c, m68klinux-tdep.c,
mi/mi-cmd-break.c, mi/mi-interp.c, mi/mi-main.c, objfiles.c,
ppc-linux-nat.c, ppc-linux-tdep.c, printcmd.c, procfs.c,
python/py-breakpoint.c, python/py-finishbreakpoint.c,
python/py-inferior.c, python/py-unwind.c, ravenscar-thread.c,
record-btrace.c, record-full.c, record.c, regcache.c, remote.c,
riscv-tdep.c, sol-thread.c, solib-aix.c, solib-spu.c, solib.c,
spu-multiarch.c, spu-tdep.c, stack.c, symfile-mem.c, symfile.c,
symtab.c, thread.c, top.c, tracepoint.c, tui/tui-hooks.c,
tui/tui-interp.c, valops.c: Update all users.
* tui/tui-hooks.c (tui_bp_created_observer)
(tui_bp_deleted_observer, tui_bp_modified_observer)
(tui_inferior_exit_observer, tui_before_prompt_observer)
(tui_normal_stop_observer, tui_register_changed_observer):
Remove.
(tui_observers_token): New global.
(attach_or_detach, tui_attach_detach_observers): New functions.
(tui_install_hooks, tui_remove_hooks): Use
tui_attach_detach_observers.
* record-btrace.c (record_btrace_thread_observer): Remove.
(record_btrace_thread_observer_token): New global.
* observer.sh: Remove.
* observer.c: Rename to observable.c.
* observable.c (namespace gdb_observers): Define new objects.
(observer_debug): Move into gdb_observers namespace.
(struct observer, struct observer_list, xalloc_observer_list_node)
(xfree_observer_list_node, generic_observer_attach)
(generic_observer_detach, generic_observer_notify): Remove.
(_initialize_observer): Update.
Don't include observer.inc.
* Makefile.in (generated_files): Remove observer.h, observer.inc.
(clean mostlyclean): Likewise.
(observer.h, observer.inc): Remove targets.
(SUBDIR_UNITTESTS_SRCS): Add observable-selftests.c.
(COMMON_SFILES): Use observable.c, not observer.c.
* .gitignore: Remove observer.h.
gdb/doc/ChangeLog
2018-03-19 Tom Tromey <tom@tromey.com>
* observer.texi: Remove.
gdb/testsuite/ChangeLog
2018-03-19 Tom Tromey <tom@tromey.com>
* gdb.gdb/observer.exp: Remove.
Some of GDB's trace test cases define a function end() and place a
breakpoint there with "break end". However, when libinproctrace is linked
to the binary, there are multiple methods named "end", such as
std::string::end() from the C++ library or format_pieces::end() from
common/format.h. GDB then creates multiple breakpoints instead of just a
single one, and some FAILs result, such as these:
FAIL: gdb.trace/trace-mt.exp: ftrace on: break end
FAIL: gdb.trace/trace-mt.exp: ftrace off: break end
Fix this by adding the "-qualified" option to the break commands. For
consistency, change all occurrences of "break end" (and similar) in all
trace test cases, even if the current behavior does not cause problems.
Also, consequently use the gdb_breakpoint convenience proc.
gdb/testsuite/ChangeLog:
* gdb.trace/actions-changed.exp: Call gdb_breakpoint with the
"qualified" option when setting breakpoints.
* gdb.trace/backtrace.exp: Likewise.
* gdb.trace/circ.exp: Likewise.
* gdb.trace/collection.exp: Likewise.
* gdb.trace/disconnected-tracing.exp: Likewise.
* gdb.trace/ftrace-lock.exp: Likewise.
* gdb.trace/ftrace.exp: Likewise.
* gdb.trace/infotrace.exp: Likewise.
* gdb.trace/packetlen.exp: Likewise.
* gdb.trace/passc-dyn.exp: Likewise.
* gdb.trace/qtro.exp: Likewise.
* gdb.trace/read-memory.exp: Likewise.
* gdb.trace/report.exp: Likewise.
* gdb.trace/signal.exp: Likewise.
* gdb.trace/status-stop.exp: Likewise.
* gdb.trace/strace.exp: Likewise.
* gdb.trace/tfind.exp: Likewise.
* gdb.trace/trace-break.exp: Likewise.
* gdb.trace/trace-condition.exp: Likewise.
* gdb.trace/trace-mt.exp: Likewise.
* gdb.trace/tstatus.exp: Likewise.
* gdb.trace/tsv.exp: Likewise.
* gdb.trace/unavailable-dwarf-piece.exp: Likewise.
* gdb.trace/unavailable.exp: Likewise.
* gdb.trace/while-dyn.exp: Likewise.
This removes some cleanups from solib.c, replacing them with
gdb::def_vector.
Regression tested by the buildbot.
gdb/ChangeLog
2018-03-18 Tom Tromey <tom@tromey.com>
* solib.c (gdb_bfd_lookup_symbol_from_symtab): Use
gdb::def_vector.
(bfd_lookup_symbol_from_dyn_symtab): Likewise.
This replaces some manual string manipulation in
auto_load_objfile_script_1 with std::string, simplifying the code and
allowing the removal of some cleanups.
Tested by the buildbot.
2018-03-17 Tom Tromey <tom@tromey.com>
* auto-load.c (auto_load_objfile_script_1): Use std::string.
This removes target_fileio_close_cleanup in favor of a new RAII class.
The new class is similar to scoped_fd but calls
target_fileio_close_cleanup rather than close.
Regression tested by the buildbot.
gdb/ChangeLog
2018-03-17 Tom Tromey <tom@tromey.com>
* target.c (class scoped_target_fd): New.
(target_fileio_close_cleanup): Remove.
(target_fileio_read_alloc_1): Use scoped_target_fd.
Many projects (e.g. the Linux kernel) and build systems use "silent"
rules, which means that they'll only print a summary of what's being
done instead of printing all the detailed command lines. While chatting
on the #gdb IRC channel, I realized a few people (including me) thought
it would be nice to have it in GDB too.
The idea is that too much text is not useful, the important information
gets lost. If there's only the essential information, it's more likely
to be useful. Most of the time, when I look at the build output, it's
to see how it's progressing. By just printing a brief summary of each
operation, I can easily spot what's currently being compiled and
therefore how the build progresses (with time you know the order in
which files are compiled almost by heart).
As with other projects (Linux, automake-based things, probably others),
it's possible to print the complete command lines by passing V=1 to make
(or any other non-zero value).
I had one hesitation about this: when people report build failures, we
are more likely to miss the full compile command line. We'll probably
sometimes need to ask people to include the build log with "make V=1".
I don't think it's a big downside, if other projects the size of the
Linux kernel can live with it, I'm sure we can too.
gdb/ChangeLog:
* silent-rules.mk: New.
* Makefile.in: Include silent-rules.mk
(srcdir, VPATH, top_srcdir): Move up.
(COMPILE): Add ECHO_CXX.
(test-cp-name-parser$(EXEEXT)): Add ECHO_CXXLD.
(init.c): Add ECHO_INIT_C.
(gdb$(EXEEXT)): Add SILENCE and ECHO_CXXLD.
(version.c): Add ECHO_GEN.
(printcmd.o): Add ECHO_CXX.
(target-float.o): Add ECHO_CXX.
(ada-exp.o): Add ECHO_CXX.
(stamp-xml): Add SILENCE and ECHO_GEN_XML_BUILTIN.
(insight$(EXEEXT)): Add ECHO_CXXLD.
* gnulib/configure.ac: Add AM_SILENT_RULES.
* gnulib/aclocal.m4: Re-generate.
* gnulib/configure: Re-generate.
* gnulib/import/Makefile.in: Re-generate.
gdb/gdbserver/ChangeLog:
* Makefile.in: Include silent-rules.mk.
(srcdir, abs_top_srcdir, abs_srcdir, VPATH): Move up.
(COMPILE): Add ECHO_CXX.
(gdbserver$(EXEEXT)): Add SILENCE and ECHO_CXXLD.
(gdbreplay$(EXEEXT)): Add SILENCE and ECHO_CXXLD.
($(IPA_LIB)): Add SILENCE and ECHO_CXXLD.
(version-generated.c): Add ECHO_GEN.
(stamp-xml): Add SILENCE and ECHO_GEN_XML_BUILTIN_GENERATED.
(IPAGENT_COMPILE): Add ECHO_CXX.
(%-generated.c): Add ECHO_REGDAT.