microblaze-linux uses the standard ELF script, microblaze-elf its own
script lacking an input section pattern needed to make this test pass.
Add the missing pattern for .data, in line with most other sections
that do have .* patterns.
* scripttempl/elfmicroblaze.sc (.data): Add .data.* entry.
* testsuite/ld-elf/var1.d: Don't xfail microblaze.
On x86_64-nacl we currently see
FAIL: Absolute non-overflowing relocs
FAIL: ld-x86-64/protected2-k1om
FAIL: ld-x86-64/protected3-k1om
This limits the tests as per the l1om variants.
* testsuite/ld-x86-64/abs-k1om.d: Run only on x86_64-*-linux*.
* testsuite/ld-x86-64/protected2-k1om.d: Likewise.
* testsuite/ld-x86-64/protected3-k1om.d: Likewise.
This unfortunately means conditionalizing out all the libctf code, but
the result is not too unbearably ugly, if a bit repetitive. I have
stubbed out code in the !ENABLE_LIBCTF path to avoid extra redundant
ifdefs where it seems that might be helpful. (The stubs are not too
disruptive, but I've tried to keep them on one line where possible to
avoid filling up the screen with stubs that nobody would care about.
If this is too much of a coding style violation I can change it.)
Changes since v2: use GCC_ENABLE rather than repeating all the
AC_ARG_ENABLE stuff over and over again.
ld/
* configure.ac [--enable-libctf]: New, default yes.
Set ENABLE_LIBCTF accordingly.
* Makefile.am [!ENABLE_LIBCTF]: Empty LIBCTF.
* configure: Regenerate.
* config.in: Regenerate.
* Makefile.in: Regenerate.
* aclocal.m4: Regenerate.
* ldlang.c (ctf_output): Conditionalize on ENABLE_LIBCTF.
(ldlang_open_ctf): Likewise.
(lang_merge_ctf): Likewise.
(ldlang_ctf_apply_strsym): Likewise.
(lang_write_ctf): Likewise.
(ldlang_write_ctf_late): Likewise.
(ldlang_open_ctf) [!ENABLE_LIBCTF]: Warn about the presence of CTF
sections.
(lang_merge_ctf) [!ENABLE_LIBCTF]: New stub.
(ldlang_ctf_apply_strsym) [!ENABLE_LIBCTF]: Likewise.
(lang_write_ctf) [!ENABLE_LIBCTF]: Likewise.
(ldlang_write_ctf_late) [!ENABLE_LIBCTF]: Likewise.
* ldelfgen.c (ldelf_emit_ctf_early): Conditionalize on
ENABLE_LIBCTF.
(struct ctf_strsym_iter_cb_arg): Likewise.
(ldelf_ctf_strtab_iter_cb): Likewise.
(ldelf_ctf_symbols_iter_cb): Likewise.
(ldelf_examine_strtab_for_ctf): Likewise.
(ldelf_emit_ctf_early) [!ENABLE_LIBCTF]: New stub.
(ldelf_examine_strtab_for_ctf) [!ENABLE_LIBCTF]: New stub.
binutils/
* configure.ac [--enable-libctf]: New, default yes.
Set ENABLE_LIBCTF accordingly.
* Makefile.am [!ENABLE_LIBCTF]: Empty LIBCTF and LIBCTF_NOBFD.
* configure: Regenerate.
* config.in: Regenerate.
* Makefile.in: Regenerate.
* aclocal.m4: Regenerate.
* objdump.c (usage): Conditionalize portions on ENABLE_LIBCTF.
(option_values): Likewise.
(long_options): Likewise.
(main): Likewise.
(dump_ctf_indent_lines): Conditionalize out when !ENABLE_LIBCTF.
(make_ctfsect): Likewise.
(dump_ctf_archive_member): Likewise.
(dump_ctf) [ENABLE_LIBCTF]: Likewise.
(dump_ctf) [!ENABLE_LIBCTF]: New empty stub.
* readelf.c (options): Conditionalize portions on ENABLE_LIBCTF.
(usage): Likewise.
(process_section_contents): Likewise.
(shdr_to_ctf_sect): Conditionalize out when !ENABLE_LIBCTF.
(dump_ctf_indent_lines): Likewise.
(dump_section_as_ctf) [ENABLE_LIBCTF]: Likewise.
This patch adds GNU attribute support to m68k and utilises it to tag the
floating-point calling convention used (hard-float or soft-float). It enables
the linker to ensure linked objects use a consistent floating-point ABI and
allows tools like GDB to infer the ABI used from the ELF file. It is based on
similar work done for PowerPC.
bfd/
* elf32-m68k.c (m68k_elf_merge_obj_attributes): New function.
(elf32_m68k_merge_private_bfd_data): Merge GNU attributes.
binutils/
* readelf.c (display_m68k_gnu_attribute): New function.
(process_arch_specific): Call display_m68k_gnu_attribute for EM_68K.
gas/
* config/tc-m68k.c (m68k_elf_gnu_attribute): New function.
(md_pseudo_table): Handle "gnu_attribute".
* doc/as.texi: Document GNU attribute for M68K.
include/
* elf/m68k.h: Add enum for GNU object attribute with floating point
tag name and values.
ld/
* testsuite/ld-m68k/attr-gnu-4-0.s: New file.
* testsuite/ld-m68k/attr-gnu-4-1.s: Likewise.
* testsuite/ld-m68k/attr-gnu-4-2.s: Likewise.
* testsuite/ld-m68k/attr-gnu-4-00.d: Likewise.
* testsuite/ld-m68k/attr-gnu-4-01.d: Likewise.
* testsuite/ld-m68k/attr-gnu-4-02.d: Likewise.
* testsuite/ld-m68k/attr-gnu-4-10.d: Likewise.
* testsuite/ld-m68k/attr-gnu-4-11.d: Likewise.
* testsuite/ld-m68k/attr-gnu-4-12.d: Likewise.
* testsuite/ld-m68k/attr-gnu-4-20.d: Likewise.
* testsuite/ld-m68k/attr-gnu-4-21.d: Likewise.
* testsuite/ld-m68k/attr-gnu-4-22.d: Likewise.
* testsuite/ld-m68k/m68k.exp: Run the new tests.
Change ld --help output to
-d, -dc, -dp Force common symbols to be defined
--dependency-file FILE Write dependency file
instead of
-d, -dc Force common symbols to be defined
--dependency-file FILE, -dp Write dependency file
PR ld/26165
* lexsup.c (ld_options): Correct --dependency-file order.
Dynamic tags, DT_JMPREL, PLTREL and PLTRELSZ, are needed only if there
are relocation entries for PLT. Don't generate them if there are no
relocation entries for PLT.
bfd/
PR ld/26083
* elf32-csky.c (csky_elf_size_dynamic_sections): Call
_bfd_elf_add_dynamic_tags.
ld/
PR ld/26083
* testsuite/ld-csky/tls-ie-v1.d: Updated.
* testsuite/ld-csky/tls-ie.d: Likewise.
Dynamic tags, DT_JMPREL, PLTREL and PLTRELSZ, are needed only if there
are relocation entries for PLT. Don't generate them if there are no
relocation entries for PLT.
bfd/
PR ld/26083
* elf32-cris.c (elf_cris_size_dynamic_sections): Call
_bfd_elf_add_dynamic_tags.
ld/
PR ld/26083
* testsuite/ld-cris/libdso-15b.d: Updated.
* testsuite/ld-cris/libdso-1c.d: Likewise.
* testsuite/ld-cris/libdso-1d.d: Likewise.
* testsuite/ld-cris/libdso-15c.d: New file.
We need to set non_ir_ref_regular on the source for assignment to get
the correct LTO resolution:
190 a27be7f4ad90c5ce PREVAILING_DEF real_g
instead of
190 30c3b2d8f967f5ea PREVAILING_DEF_IRONLY real_g
PR ld/26163
* ldexp.c (exp_fold_tree_1): Set non_ir_ref_regular on the source
for assignment.
* testsuite/ld-plugin/lto.exp: Run ld/26163 test.
* testsuite/ld-plugin/pr26163a.c: New file.
* testsuite/ld-plugin/pr26163b.c: Likewise.
It's best if help message output does not contain tabs, since we don't
know tab stop settings or even if tabs are handled by the output
device. This reverts some 2020-06-23 changes and fixes the csky help
message.
* lexsup.c (elf_shlib_list_options): Properly format help message.
(elf_plt_unwind_list_options): Likewise.
* emultempl/cskyelf.em (PARSE_AND_LIST_OPTIONS): Likewise.
If an archive map contains symbols that aren't actually defined by the
indexed element for any reason, then loading that element will leave
the symbol undefined (or common). This leads to the possibility of
the element being loaded again should the archive be searched again
due to the action of --start-group/--end-group. The testcase
triggering this problem was an archive containing fat lto objects,
with the archive map incorrectly created by ar rather than gcc-ar.
PR 26150
* ldlang.c (ldlang_add_file): Assert that we aren't adding the
current end of link.next list again too.
* ldmain.c (add_archive_element): Don't load archive elements
again that have already been loaded.
We do know some conflicts among different privileged specs. For linker,
the safest approach is that don't allow the object linked with others which
may cause conflicts. But this may cause inconvenience since not all objects
with conflicting priv specs are linked will cause problems. But it is hard
to know the detailed conflict cases for linker, so we probably need a option
to tell linker that we do know there are no conflicts, or we are willing to
take risks to link the objects with conflicted priv specs. But the option
is still under discussion.
Therefore, we can report warnings rather than errors when linking the objects
with conflicted priv specs. This not only makes the linker more flexible,
but also warns people that the conflicts may happen. We also need to update
the output priv spec version once the input priv spec is newer.
bfd/
* elfxx-riscv.c (struct priv_spec_t priv_specs[]): Move them from
opcodes/riscv-opc.c to bfd/elfxx-riscv.c, since we need it in linker.
(riscv_get_priv_spec_class): Likewise.
(riscv_get_priv_spec_name): Likewise.
(riscv_get_priv_spec_class_from_numbers): New function, convert
the version numbers into string, then call riscv_get_priv_spec_class
to get the priv spec class.
* elfxx-riscv.h (riscv_get_priv_spec_class): Move forward declaration
from include/opcode/riscv.h to bfd/elfxx-riscv.h.
(riscv_get_priv_spec_name): Likewise.
(riscv_get_priv_spec_class_from_numbers): New forward declaration.
(opcode/riscv.h): Include it in the header rather than elfxx-riscv.c.
* elfnn-riscv.c (riscv_merge_attributes): Get the priv spec classes
of input and output objects form their priv spec attributes by
riscv_get_priv_spec_class_from_numbers. Report warning rather than
errors when linking objects with differnet priv spec versions. We do
know v1.9.1 may have conflicts to other versions, so report the
warning, too. After that, update the output priv spec version to the
newest one so far.
gas/
* config/tc-riscv.c (buf_size, buf): Remove the unused variables.
(riscv_set_default_priv_spec): Get the priv spec version from the
priv spec attributes by riscv_get_priv_spec_class_from_numbers.
include/
* opcode/riscv.h (riscv_get_priv_spec_class): Move the function
forward declarations to bfd/elfxx-riscv.h.
(riscv_get_priv_spec_name): Likewise.
opcodes/
* riscv-opc.c: Move the structures and functions to bfd/elfxx-riscv.c.
* riscv-dis.c: Include elfxx-riscv.h.
ld/
* testsuite/ld-riscv-elf/attr-merge-priv-spec-failed-01.d: Updated.
* testsuite/ld-riscv-elf/attr-merge-priv-spec-failed-02.d: Updated.
* testsuite/ld-riscv-elf/attr-merge-priv-spec-failed-03.d: Updated.
* testsuite/ld-riscv-elf/attr-merge-priv-spec-failed-04.d: Updated.
* testsuite/ld-riscv-elf/attr-merge-priv-spec-failed-05.d: Updated.
* testsuite/ld-riscv-elf/attr-merge-priv-spec-failed-06.d: Updated.
ERROR should really be reserved for errors in the testsuite framework,
not just normal errors from the tools under test. Removing use of
perror has been suggested before but without action, over concerns
that some test failures might be missed. This patch removes uses of
perror in ld_assemble, ld_compile and ld_nm, and updates numerous
places that ignored the result of these functions by inappropriately
returning an "unresolved" test status. Net result over my large set
of targets look good, in some cases improving the diagnostics, eg:
i386-msdos -ERROR: tmpdir/script: nm failed
i386-msdos -ERROR: tmpdir/script: nm failed
i386-msdos -ERROR: tmpdir/script: nm failed
i386-msdos -ERROR: tmpdir/script: nm failed
i386-msdos +FAIL: script
i386-msdos +FAIL: MRI script
i386-msdos +FAIL: MEMORY
i386-msdos +FAIL: MEMORY with symbols
* testsuite/lib/ld-lib.exp (default_ld_compile): Don't perror on
a compiler error.
(default_ld_assemble): Similarly for an assembler error.
(default_ld_nm): Similarly for an nm error.
(run_ld_link_tests): Report ld_assemble errors as a fail.
(check_as_cfi): Remove now unnecessary perror substitution.
* testsuite/ld-elf/exclude.exp: Report ld_nm error return as test
fails rather then unresolved.
* testsuite/ld-gc/gc.exp: Likewise.
* testsuite/ld-scripts/alignof.exp: Likewise.
* testsuite/ld-scripts/defined.exp: Likewise.
* testsuite/ld-scripts/script.exp: Likewise.
* testsuite/ld-scripts/sizeof.exp: Likewise.
* testsuite/ld-selective/selective.exp: Likewise.
* testsuite/ld-scripts/extern.exp: Likewise. Return on ld_link
failure.
* testsuite/ld-elfweak/elfweak.exp: Report compiler errors as
test unresolved.
* testsuite/ld-fastcall/fastcall.exp: Report assember errors as
test fails.
* testsuite/ld-i386/i386.exp (iamcu_tests): Likewise.
* testsuite/ld-ia64/line.exp: Likewise.
* testsuite/ld-mep/mep.exp: Likewise.
* testsuite/ld-mips-elf/mips-elf-flags.exp: Likewise.
* testsuite/ld-nios2/nios2.exp: Likewise.
* testsuite/ld-scripts/alignof.exp: Likewise.
* testsuite/ld-x86-64/line.exp: Likewise.
* testsuite/ld-x86-64/x86-64.exp: Likewise.
* testsuite/ld-scripts/log2.exp: Formatting.
* testsuite/ld-tic6x/tic6x.exp: Report ld_link errors as a test fail.
The aim of this change is to remove a whole lot of "assembly failed"
errors for ecoff targets.
* testsuite/ld-alpha/alpha.exp: Exclude *ecoff targets.
* testsuite/ld-elf/binutils.exp: Likewise.
* testsuite/ld-elf/tls.exp: Likewise.
* testsuite/ld-elf/tls_common.exp: Likewise.
* testsuite/ld-scripts/phdrs2.exp: Likewise.
All current SH gas targets use BFD. sh-coff was incorrectly reported
as unsupported.
gas/
* configure.tgt: Set bfd_gas for all SH targets.
ld/
* testsuite/ld-sh/sh.exp: Don't run relax tests for non-ELF.
Fail when ld_assemble fails. Use elseif to reduce indentation.
Some tests failed just due to st_other info, eg. [NOPV], being
emitted by readelf or objdump. Fix that. Also since alpha doesn't
support ifunc, don't run the ifunc tests for alpha.
* testsuite/ld-elf/dynamic-1.rd: Accept st_other notations.
* testsuite/ld-elf/rdynamic-1.rd: Likewise.
* testsuite/ld-elf/pr9676.rd: Likewise.
* testsuite/ld-elf/pr9679.rd: Likewise.
* testsuite/ld-elfvers/vers30.dsym: Likewise.
* testsuite/ld-elfvers/vers31.dsym: Likewise.
* testsuite/ld-plugin/pr22983.3.d: Likewise.
* testsuite/ld-ifunc/ifunc.exp: Exclude alpha.
ld silently accepts -z relro and -z norelro for targets that lack the
necessary GNU_RELRO support. This patch makes those targets emit a
warning instead, and adds testsuite infrastructure to detect when
relro is unsupported.
binutils/
* testsuite/config/default.exp (ld_elf_shared_opt): Don't set.
* testsuite/lib/binutils-common.exp (check_relro_support): New proc.
(run_dump_test): Use check_relro_support to decide whether to pass
extra ld option "-z norelro".
ld/
* emultempl/elf.em (gld${EMULATION_NAME}_handle_option): Omit
-z relro and -z norelro when target support for GNU_RELRO is lacking.
(gld${EMULATION_NAME}_before_parse): Ignore RELRO default too.
* emultempl/aarch64elf.em (gld${EMULATION_NAME}_before_parse): Ignore
RELRO default when target support for GNU_RELRO is lacking.
* emultempl/armelf.em (gld${EMULATION_NAME}_before_parse): Likewise.
* emultempl/linux.em (gld${EMULATION_NAME}_before_parse): Likewise.
* emultempl/scoreelf.em (gld${EMULATION_NAME}_before_parse): Likewise.
* testsuite/config/default.exp (ld_elf_shared_opt): Don't set.
* testsuite/ld-elf/pr16322.d: xfail when no relro support.
* testsuite/ld-elf/pr22393-1a.d: Likewise.
* testsuite/ld-elf/pr22393-1b.d: Likewise.
* testsuite/ld-elf/shared.exp (pr20995-2.so, pr20995-2): Likewise.
* testsuite/lib/ld-lib.exp (run_ld_link_tests): Use check_relro_support
to decide whether to pass extra ld option "-z norelro".
2020-06-15 Max Filippov <jcmvbkbc@gmail.com>
bfd/
* elf32-xtensa.c (XSHAL_ABI, XTHAL_ABI_UNDEFINED)
(XTHAL_ABI_WINDOWED, XTHAL_ABI_CALL0): New macros.
(elf32xtensa_abi): New global variable.
(xtensa_abi_choice): New function.
(elf_xtensa_create_plt_entry): Use xtensa_abi_choice instead of
XSHAL_ABI to select PLT code.
gas/
* config/tc-xtensa.c (XTHAL_ABI_WINDOWED, XTHAL_ABI_CALL0): New
macros.
(elf32xtensa_abi): New declaration.
(option_abi_windowed, option_abi_call0): New enum constants.
(md_longopts): Add entries for --abi-windowed and --abi-call0.
(md_parse_option): Add handlers for --abi-windowed and
--abi-call0.
(xtensa_add_config_info): Use xtensa_abi_choice instead of
XSHAL_ABI to format ABI tag.
* doc/as.texi (Target Xtensa options): Add --abi-windowed and
--abi-call0 to the list of options.
* doc/c-xtensa.texi: Add description for options --abi-windowed
and --abi-call0.
* testsuite/gas/xtensa/abi-call0.d: New test definition.
* testsuite/gas/xtensa/abi-windowed.d: New test definition.
* testsuite/gas/xtensa/abi.s: New test source.
include/
* elf/xtensa.h (xtensa_abi_choice): New declaration.
ld/
* emultempl/xtensaelf.em (XSHAL_ABI): Remove macro definition.
(XTHAL_ABI_UNDEFINED, XTHAL_ABI_WINDOWED, XTHAL_ABI_CALL0): New
macros.
(elf32xtensa_abi): New declaration.
(xt_config_info_unpack_and_check): Set elf32xtensa_abi if it is
undefined. Use xtensa_abi_choice instead of XSHAL_ABI to test
ABI tag consistency.
(xtensa_add_config_info): Use xtensa_abi_choice instead of
XSHAL_ABI to format ABI tag.
(PARSE_AND_LIST_PROLOGUE): Define OPTION_ABI_WINDOWED,
OPTION_ABI_CALL0 and declare elf32xtensa_abi.
(PARSE_AND_LIST_LONGOPTS): Add entries for --abi-windowed and
--abi-call0.
(PARSE_AND_LIST_OPTIONS): Add help text for --abi-windowed and
--abi-call0.
(PARSE_AND_LIST_ARGS_CASES): Add handlers for --abi-windowed and
--abi-call0.
* ld.texi: Add description for options --abi-windowed and
--abi-call0.
* testsuite/ld-linkonce/zeroeh_x.s: Rename from x.s.
* testsuite/ld-linkonce/zeroeh_y.s: Rename from y.s.
* testsuite/ld-linkonce/zeroehl32.d: Adjust for renaming. Support
big-endian output. Run for powerpc.
lto-6.c refers to _etext, pr12760b.c has a .gnu.warning section,
the pr23818 test uses readelf, and pr23958.c has a .symver directive.
* testsuite/ld-plugin/lto.exp (lto_link_tests): Move lto-6,
pr12760, pr23818 and pr23958 tests to..
(lto_link_elf_tests): ..here.
* testsuite/ld-elf/linux-x86.exp: Build tests when non-native.
(check_pr25749b): Add optional args. Set expected pass file
from args. Run -1b and -2a tests with passall.out.
* testsuite/ld-elf/passall.out: New file.
* testsuite/ld-elf/pr25749-1.c: Adjust to pass with older glibc.
* testsuite/ld-elf/pr25749-2.c: Likewise.
* testsuite/lib/ld-lib.exp (run_ld_link_exec_tests): Use
regexp_diff to compare expected output from running binary.
Add ifunc_resolvers to elf_link_hash_table and use it for both x86 and
ppc64. Before glibc commit b5c45e837, DT_TEXTREL is incompatible with
IFUNC resolvers. Set ifunc_resolvers if there are IFUNC resolvers and
issue a warning for IFUNC resolvers with DT_TEXTREL.
bfd/
PR ld/18801
* elf-bfd.h (elf_link_hash_table): Add ifunc_resolvers.
(_bfd_elf_allocate_ifunc_dyn_relocs): Remove the
bfd_boolean * argument. Set ifunc_resolvers if there are IFUNC
resolvers.
* elf-ifunc.c (_bfd_elf_allocate_ifunc_dyn_relocs): Updated.
Set ifunc_resolvers if there are FUNC resolvers.
* elf64-ppc.c (ppc_link_hash_table): Remove local_ifunc_resolver.
(build_global_entry_stubs_and_plt): Replace local_ifunc_resolver
with elf.ifunc_resolvers.
(write_plt_relocs_for_local_syms): Likewise.
(ppc64_elf_relocate_section): Likewise.
(ppc64_elf_finish_dynamic_sections): Likewise.
* elfnn-aarch64.c (elfNN_aarch64_allocate_ifunc_dynrelocs):
Updated.
* elfxx-x86.c (elf_x86_allocate_dynrelocs): Likewise.
(_bfd_x86_elf_size_dynamic_sections): Check elf.ifunc_resolvers
instead of readonly_dynrelocs_against_ifunc.
* elfxx-x86.h (elf_x86_link_hash_table): Remove
readonly_dynrelocs_against_ifunc.
ld/
PR ld/18801
* testsuite/ld-i386/i386.exp: Run ifunc-textrel-1a,
ifunc-textrel-1b, ifunc-textrel-2a and ifunc-textrel-2b.
* testsuite/ld-x86-64/x86-64.exp: Likewise.
* testsuite/ld-i386/ifunc-textrel-1a.d: Likewise.
* testsuite/ld-i386/ifunc-textrel-1b.d: Likewise.
* testsuite/ld-i386/ifunc-textrel-2a.d: Likewise.
* testsuite/ld-i386/ifunc-textrel-2b.d: Likewise.
* testsuite/ld-x86-64/ifunc-textrel-1.s: Likewise.
* testsuite/ld-x86-64/ifunc-textrel-1a.d: Likewise.
* testsuite/ld-x86-64/ifunc-textrel-1b.d: Likewise.
* testsuite/ld-x86-64/ifunc-textrel-2.s: Likewise.
* testsuite/ld-x86-64/ifunc-textrel-2a.d: Likewise.
* testsuite/ld-x86-64/ifunc-textrel-2b.d: Likewise.
* testsuite/ld-i386/pr18801a.d: Expect warning for IFUNC
resolvers.
* testsuite/ld-i386/pr18801b.d: Likewise.
* estsuite/ld-x86-64/pr18801a.d: Likewise.
* estsuite/ld-x86-64/pr18801b.d: Likewise.
$LFLAGS is needed for -shared test. This fixes
FAIL: PR ld/21703 shared
for tic6x-*-elf.
* testsuite/ld-elf/shared.exp: Pass $LFLAGS to PR ld/21703
shared test.
It looks like this one was previously just swept under the rug. Prior
to git commit c4b126b87a, the arm backend emitted an absolute
dynamic symbol "foo" with value zero for what was originally a common
symbol. That was just wrong.
The patch also removes an xfail for bfin-linux-uclibc.
PR 13802
* testsuite/ld-elf/comm-data.exp: Don't xfail arm or bfin-linux.
This patch makes ld accept and ignore -plugin options when configured
with --disable-plugins. The idea is to allow using a linker built
without plugin support with a gcc built with plugin support. Quite
obviously such a combination won't work if using LTO, but gcc has a
habit of passing a bunch of -plugin and -plugin-opt arguments to ld
even when not generating or linking LTO objects.
Why do I want to do this? Well, it lets me and other binutils
developers answer the question as to whether plugin support breaks
binutils in some areas. Which it does for some targets.
* lexsup.c (ld_options): Accept -plugin and -plugin-opt when
!ENABLE_PLUGINS.
* testsuite/lib/ld-lib.exp (check_plugin_api_available): Adjust.
bfd/
* elfnn-riscv.c (riscv_merge_attributes): Add new boolean
priv_may_conflict, in_priv_zero and out_priv_zero to decide whether
the object can be linked according to it's priv attributes. The object
without any priv spec attributes can be linked with others. If the first
input object doesn't contain any priv attributes, then we need to copy
the setting from the next input one. Also report more detailed error
messages to user.
ld/
* testsuite/ld-riscv-elf/attr-merge-priv-spec.d: Rename to
attr-merge-priv-spec-01.d.
* testsuite/ld-riscv-elf/attr-merge-priv-spec-c.s: Set priv spec
to 1.11.
* testsuite/ld-riscv-elf/attr-merge-priv-spec-d.s: Empty priv spec
setting.
* testsuite/ld-riscv-elf/attr-merge-priv-spec-02.d: New testcase.
* testsuite/ld-riscv-elf/attr-merge-priv-spec-03.d: Likewise.
* testsuite/ld-riscv-elf/attr-merge-priv-spec-failed-01.d: Likewise.
* testsuite/ld-riscv-elf/attr-merge-priv-spec-failed-02.d: Likewise.
* testsuite/ld-riscv-elf/attr-merge-priv-spec-failed-03.d: Likewise.
* testsuite/ld-riscv-elf/attr-merge-priv-spec-failed-04.d: Likewise.
* testsuite/ld-riscv-elf/attr-merge-priv-spec-failed-05.d: Likewise.
* testsuite/ld-riscv-elf/attr-merge-priv-spec-failed-06.d: Likewise.
* testsuite/ld-riscv-elf/ld-riscv-elf.exp: Updated.
gas/
* config/tc-riscv.c (explicit_csr): New static boolean.
Used to indicate CSR are explictly used.
(riscv_ip): Set explicit_csr to TRUE if any CSR is used.
(riscv_write_out_attrs): If we already have set elf priv
attributes, then generate them. Otherwise, don't generate
them when no CSR are used.
* testsuite/gas/riscv/attribute-01.d: Remove the priv attributes.
* testsuite/gas/riscv/attribute-02.d: Likewise.
* testsuite/gas/riscv/attribute-03.d: Likewise.
* testsuite/gas/riscv/attribute-04.d: Likewise.
* testsuite/gas/riscv/attribute-05.d: Likewise.
* testsuite/gas/riscv/attribute-06.d: Likewise.
* testsuite/gas/riscv/attribute-07.d: Likewise.
* testsuite/gas/riscv/attribute-08.d: Likewise.
* testsuite/gas/riscv/attribute-09.d: Likewise.
* testsuite/gas/riscv/attribute-10.d: Likewise.
* testsuite/gas/riscv/attribute-unknown.d: Likewise.
* testsuite/gas/riscv/attribute-11.s: New testcase.
* testsuite/gas/riscv/attribute-11.d: New testcase. The CSR is
used, so we should output the ELF priv attributes.
* testsuite/gas/riscv/attribute-12.d: New testcase. The CSR is
used, so output the priv attributes according to the -mpriv-spec.
* testsuite/gas/riscv/attribute-13.d: New testcase. The CSR isn't
used, so ignore the -mpriv-spec setting.
ld/
* testsuite/ld-riscv-elf/attr-merge-arch-01.d: Likewise.
* testsuite/ld-riscv-elf/attr-merge-arch-02.d: Likewise.
* testsuite/ld-riscv-elf/attr-merge-arch-03.d: Likewise.
* testsuite/ld-riscv-elf/attr-merge-stack-align.d: Likewise.
* testsuite/ld-riscv-elf/attr-merge-strict-align-01.d: Likewise.
* testsuite/ld-riscv-elf/attr-merge-strict-align-02.d: Likewise.
* testsuite/ld-riscv-elf/attr-merge-strict-align-03.d: Likewise.
* testsuite/ld-riscv-elf/attr-merge-strict-align-04.d: Likewise.
* testsuite/ld-riscv-elf/attr-merge-strict-align-05.d: Likewise.
* testsuite/ld-riscv-elf/call-relax.d: Add -mno-arch-attr.
Alan Modra
Nick Clifton
H.J. Lu
Nick Alcock
Jan Beulich
Pat Bernardi
Roland McGrath
Nelson Chu
Max Filippov