Change compressed input debug section name for objdump is very confusing.
But we need to change it for linker so that linker will consider the
input section as a debug section. This patch delays section rename to
elf_fake_sections for objcopy and avoids it for objdump.
bfd/
PR binutils/18209
* bfd.c (bfd): Add is_linker_input.
* elf.c (convert_debug_to_zdebug): New.
(convert_zdebug_to_debug): Likewise.
(_bfd_elf_make_section_from_shdr): Don't convert .debug_* to
.zdebug_* here. Use convert_zdebug_to_debug. Set SEC_ELF_RENAME.
(_bfd_elf_init_reloc_shdr): Pass a pointer to section name
instead of a pointer to section.
(elf_fake_sections): Rename the section name if SEC_ELF_RENAME
is set.
* section.c (SEC_ELF_RENAME): New.
* bfd-in2.h: Regenerated.
binutils/
PR binutils/18209
* objcopy.c (setup_section): Copy compress status.
binutils/testsuite/
PR binutils/18209
* binutils-all/compress.exp: Replace dw2-3.W with dw2-3gabi.W
on zlib-gabi output.
* binutils-all/dw2-1.W: Convert section names to .zdebug_*.
* binutils-all/dw2-3.W: Likewise.
* binutils-all/objdump.W: Likewise.
* binutils-all/dw2-3gabi.W: New file.
ld/
PR binutils/18209
* ldfile.c (ldfile_try_open_bfd): Set is_linker_input to 1.
The linker tries to put the end of the last section in the relro
segment exactly on a page boundary, because the relro segment itself
must end on a page boundary. If for any reason this can't be done,
padding is inserted. Since the end of the relro segment is typically
between .got and .got.plt, padding effectively increases the size of
the GOT. This isn't nice for targets and code models with limited GOT
addressing.
The problem with the current code is that it doesn't cope very well
with aligned sections in the relro segment. When making .got aligned
to a 256 byte boundary for PowerPC64, I found that often the initial
alignment attempt failed and the fallback attempt to be less than
adequate. This is a particular problem for PowerPC64 since the
distance between .got and .plt affects the size of plt call stubs,
leading to "stubs don't match calculated size" errors.
So this rewrite takes a direct approach to calculating a new relro
base. Starting from the last section in the segment, we calculate
where it must start to position its end on the boundary, or as near as
possible considering alignment requirements. The new start then
becomes the goal for the previous section to end, and so on for all
sections. This of course ignores the possibility that user scripts
will place . = ALIGN(xxx); in the relro segment, or provide section
address expressions. In those cases we might fail, but the old code
probably did too, and a fallback is provided.
ld/
* ldexp.h (struct ldexp_control): Delete dataseg.min_base. Add
data_seg.relro_offset.
* ldexp.c (fold_binary <DATA_SEGMENT_ALIGN>): Don't set min_base.
(fold_binary <DATA_SEGMENT_RELRO_END>): Do set relro_offset.
* ldlang.c (lang_size_sections): Rewrite code adjusting relro
segment base to line up last section on page boundary.
ld/testsuite/
* ld-x86-64/pr18176.d: Update.
This patch adds --compress-debug-sections=[none|zlib|zlib-gnu|zlib-gabi]
to ld for ELF targets to support generating compressed DWARF debug
sections. We always generate .zdebug_* section since section names have
been finalized and they can't be changed easily when compression is
being performed.
bfd/
* bfd-in.h (compressed_debug_section_type): New.
* compress.c (bfd_compress_section_contents): Add an argument
for linker write compression and always generate .zdebug_*
section when linking.
(bfd_init_section_compress_status): Pass FALSE to
bfd_compress_section_contents.
(bfd_compress_section): New function.
* elf.c (elf_fake_sections): For linking, set SEC_ELF_COMPRESS
on DWARF debug sections if COMPRESS_DEBUG is set and rename
section if COMPRESS_DEBUG_GABI_ZLIB isn't set.
(assign_file_positions_for_non_load_sections): Set sh_offset
to -1 if SEC_ELF_COMPRESS is set.
(assign_file_positions_except_relocs): Likwise.
(_bfd_elf_assign_file_positions_for_relocs): Renamed to ...
(_bfd_elf_assign_file_positions_for_non_load): This. Change
return time to bfd_boolean. Compress the section if
SEC_ELF_COMPRESS is set.
(_bfd_elf_write_object_contents): Updated.
(_bfd_elf_set_section_contents): Write section contents to
the buffer if SEC_ELF_COMPRESS is set.
* merge.c: Include "elf-bfd.h".
(sec_merge_emit): Add arguments for contents and offset. Write
to contents with offset if contents isn't NULL.
(_bfd_write_merged_section): Write section contents to the
buffer if SEC_ELF_COMPRESS is set. Pass contents and
output_offset to sec_merge_emit.
* elflink.c (bfd_elf_final_link): Allocate the buffer for
output section contents if SEC_ELF_COMPRESS is set.
* section.c (SEC_ELF_COMPRESS): New.
* bfd-in2.h: Regenerated.
gas/
* as.h (compressed_debug_section_type): Removed.
include/
* bfdlink.h (bfd_link_info): Add compress_debug.
ld/
* ld.texinfo: Document --compress-debug-sections=.
* ldmain.c (main): Set BFD_COMPRESS on output_bfd if
COMPRESS_DEBUG is set. Set BFD_COMPRESS_GABI on output_bfd
for COMPRESS_DEBUG_GABI_ZLIB.
* lexsup.c (elf_static_list_options): Add
--compress-debug-sections=.
* emultempl/elf32.em (OPTION_COMPRESS_DEBUG): New.
(xtra_long): Add "compress-debug-sections".
(gld${EMULATION_NAME}_handle_option): Handle
OPTION_COMPRESS_DEBUG.
ld/testsuite/
* ld-elf/compress.exp (build_tests): Add tests for
--compress-debug-sections=.
(run_tests): Likewise.
Add additonal tests for --compress-debug-sections=.
* ld-elf/gabiend.rt: New file.
* ld-elf/gabinormal.rt: Likewise.
* ld-elf/gnubegin.rS: Likewise.
* ld-elf/gnunormal.rS: Likewise.
* ld-elf/zlibbegin.rS: Likewise.
* ld-elf/zlibnormal.rS: Likewise.
Address of protected data defined in the shared library may be external,
i.e., due to copy relocation. By default, linker backend checks if
relocations against protected data symbols are valid for building shared
library and issues an error if relocation isn't allowed. The new option
override linker backend default. When -z noextern-protected-data is used,
updates on protected data symbols by another module won't be visibile
to the resulting shared library. This option is specific to ELF/i386
and ELF/x86-64.
bfd/
PR ld/pr17709
* elflink.c (_bfd_elf_adjust_dynamic_copy): Check
info->extern_protected_data when warning copy relocs against
protected symbols.
(_bfd_elf_symbol_refs_local_p): Check info->extern_protected_data
when checking protected non-function symbols.
include/
PR ld/pr17709
* bfdlink.h (bfd_link_info): Add extern_protected_data.
ld/
PR ld/pr17709
* ld.texinfo: Document "-z noextern-protected-data".
* ldmain.c (main): Initialize link_info.extern_protected_data
to -1.
* lexsup.c (elf_shlib_list_options): Add
"-z [no]extern-protected-data".
* emulparams/elf32_x86_64.sh: Source extern_protected_data.sh.
* emulparams/elf_i386.sh: Likewise.
* emulparams/elf_i386_be.sh: Likewise.
* emulparams/elf_i386_chaos.sh: Likewise.
* emulparams/elf_i386_ldso.sh: Likewise.
* emulparams/elf_i386_vxworks.sh: Likewise.
* emulparams/elf_k1om.sh: Likewise.
* emulparams/elf_l1om.sh: Likewise.
* emulparams/elf_x86_64.sh: Source extern_protected_data.sh.
(PARSE_AND_LIST_OPTIONS): Renamed to ...
(PARSE_AND_LIST_OPTIONS_BNDPLT): This.
(PARSE_AND_LIST_ARGS_CASE_Z): Renamed to ...
(PARSE_AND_LIST_ARGS_CASE_Z_BNDPLT): This.
(PARSE_AND_LIST_OPTIONS): Append $PARSE_AND_LIST_OPTIONS_BNDPLT.
(PARSE_AND_LIST_ARGS_CASE_Z): Append
$PARSE_AND_LIST_ARGS_CASE_Z_BNDPLT.
* emulparams/extern_protected_data.sh: New file.
ld/testsuite/
PR ld/pr17709
* ld-i386/i386.exp: Run protected6b.
* ld-i386/protected6b.d: New file.
* ld-x86-64/protected6b.d: Likewise.
* ld-x86-64/x86-64.exp: Run protected6b.
PR binutils/18198
* ld.texinfo (--be8): Add a note about the interaction of this
option with the assembler's -EB option.
* doc/c-arm.texi (ARM Options): Add a note about the interaction of
the -EB option with the linker's --be8 option.
gold marks _init and _fini via symbol, ld marks them via section
(default scripts set .init and .fini section KEEP). This makes it
possible for people to write their own _init and not bother to put the
function into the right section.
PR ld/18223
* ldlang.c (lang_process): Add _init and _fini to gc_sym_list.
When --enable-targets=all is used with non-ELF target, we should enable
ELF ld_list_options.
* configure.ac (elf_list_options): Set to TRUE for
--enable-targets=all.
(elf_shlib_list_options): Likewise.
(elf_plt_unwind_list_options): Likewise.
* configure: Regenerated.
ld * ld.h (struct ld_config_type): Add new field: warn_orphan.
* ldlex.h (enum option_values): Add OPTION_WARN_ORPHAN and
OPTION_NO_WARN_ORPHAN.
* lexsup.c (ld_options): Add --warn-orphan and --no-warn-orphan.
(parse_args): Handle the new options.
* ldemul.c (ldemul_place_orphan): If requested, generate a warning
message when an orphan section is placed in the output file.
* ld.texinfo: Document the new option.
* NEWS: Mention the new feature.
tests * ld-elf/orphan-5.l: New test - checks the linker's output with
--warn-orphan enabled.
* ld-elf/elf.exp: Run the new test.
This is a linker-only solution to the incompatibility between shared
library protected visibility variables and using .dynbss and copy
relocs for non-PIC access to shared library variables.
bfd/
* elf32-ppc.c (struct ppc_elf_link_hash_entry): Add has_addr16_ha
and has_addr16_lo. Make has_sda_refs a bitfield.
(ppc_elf_check_relocs): Set new flags.
(ppc_elf_link_hash_table_create): Update default_params.
(ppc_elf_adjust_dynamic_symbol): Clear protected_def in cases
where we won't be making .dynbss entries or editing code. Set
params->pic_fixup when we'll edit code for protected var access.
(allocate_dynrelocs): Allocate got entry for edited code and
discard dyn_relocs.
(struct ppc_elf_relax_info): Add picfixup_size.
(ppc_elf_relax_section): Rename struct one_fixup to struct
one_branch_fixup. Rename fixups to branch_fixups. Size space for
pic fixups.
(ppc_elf_relocate_section): Edit non-PIC accessing protected
visibility variables to PIC. Don't emit dyn_relocs for code
we've edited.
* elf32-ppc.h (struct ppc_elf_params): Add pic_fixup.
ld/
* emultempl/ppc32elf.em: Handle --no-pic-fixup.
(params): Init new field.
(ppc_before_allocation): Enable relaxation for pic_fixup.
Some early revisions of the Cortex-A53 have an erratum (843419). The
details of the erratum are quite complex and involve dynamic
conditions. For the purposes of the workaround we have simplified the
static conditions to an ADRP in the last two instructions of a 4KByte
page, followed within four instructions by a load/store dependent on
the ADRP.
This patch adds support to conservatively scan for and workaround
Cortex A53 erratum 843419. There are two different workaround
strategies used. The first is to rewrite ADRP instructions which form
part of an erratum sequence with an ADR instruction. In situations
where the ADR provides insufficient offset the dependent load or store
instruction from the sequence is moved to a stub section and branches
are inserted from the original sequence to the relocated instruction
and back again.
Stub section sizes are rounded up to a multiple of 4096 in order to
ensure that the act of inserting work around stubs does not create
more errata sequences.
Workaround stubs are always inserted into the stub section associated
with the input section containing the erratum sequence. This ensures
that the fully relocated form of the veneered load store instruction
is available at the point in time when the stub section is written.
Adjusting the start of the relro segment in order to make it end
exactly on a page boundary runs into difficulties when sections in the
relro segment are aligned; Adjusting the start by (next_page - end)
sometimes results in more than that adjustment occurring at the end,
overrunning the page boundary. So when that occurs we try a new lower
start position by masking the adjusted start with the maximum section
alignment. However, we didn't consider that this masked start address
may in fact be before the initial relro base, which is silly since
that can only increase padding at the relro end.
I've also moved some calculations closer to where they are used, and
comments closer to the relevant statements.
* ldlang.c (lang_size_sections): When alignment of sections
results in relro base adjustment being too large, don't go lower
than the initial value.
* ldexp.c (fold_binary <DATA_SEGMENT_RELRO_END>): Comment.
* scripttempl/elf.sc (DATA_SEGMENT_ALIGN): Omit SEGMENT_SIZE
alignment when SEGMENT_SIZE is the same as MAXPAGESIZE.
Older compilers that warn wrongly will just need -Wno-error. No way
am I going to init every single field, then have to edit this code
whenever bfd_link_hash_entry changes. Another option, making the
struct static, isn't very nice since it means larger binaries and
worse code.
* emultempl/elf32.em (gld${EMULATION_NAME}_before_allocation): Don't
init ehdr_start_save.
The ehdr_start_save variable does not need to be initialized. However,
not initializing it will trigger a compiler warning when using older
versions of GCC. Self-assignment unfortunately doesn't work for Clang
as Clang has a warning similar to -Winit-self as part of -Wall.
* emultempl/elf32.em (gld*_before_allocation): Zero-initialize
the ehdr_start_save variable.
When src or dst is NULL, the next fread or fwrite will cause a
segmentation fault, so we need to treat it as fatal.
* ldmain.c (main): Use %F instead of %X for einfo.
bfd * elf32-v850.c (v850_set_note): New function. Creates a Renesas
style note entry.
(v850_elf_make_note_section): New function. Creates a note
section.
(v850_elf_create_sections): New function. Create a note section
if one is not already present.
(v850_elf_set_note): New function. Adds a note to a bfd.
(v850_elf_copy_private_bfd_data): New function. Copies V850
notes.
(v850_elf_merge_notes): New function. Merges V850 notes.
(print_v850_note): New function. Displays a V850 note.
(v850_elf_print_notes): New function. Displays all notes attached
to a bfd.
(v850_elf_merge_private_bfd_data): Call v850_elf_merge_notes.
(v850_elf_print_private_bfd_data): Call v850_elf_print_notes.
(v850_elf_fake_sections): Set the type of the V850 note section.
* bfd-in.h (v850_elf_create_sections): Add prototype.
(v850_elf_set_note): Add prototype.
* bfd-in2.h: Regenerate.
binutils* readelf.c (get_machine_flags): Remove deprecated V850 machine
flags.
(get_v850_section_type_name): New function. Handles V850 special
sections.
(get_section_type_name): Add support for V850.
(get_v850_elf_note_type): New function. Returns the name of a
V850 note.
(print_v850_note): New function. Prints a V850 note.
(process_v850_notes): New function. Prints V850 notes.
(process_note_sections): Add support for V850.
binutils/testsute
* binutils-all/objcopy.exp: Skip the strip-10 test for the V850.
gas * config/tc-v850.c (soft_float): New variable.
(v850_data_8): New variable.
(md_show_usage): Add -msoft-float/-mhard-float.
(md_parse_option): Likewise.
(md_begin): Set the default value of soft_float.
(v850_md_end): New function. Creates a note section.
* config/tc-v850.h (md_end): Define.
* doc/c-v850.texi: Document -msoft-float/-mhard-float.
gas/testsuite
* gas/elf/elf.exp: Add special version of the section2 test for
the V850.
* gas/elf/section2.e-v850: New file.
include/elf
* v850.h (EF_RH850_SIMD): Delete deprecated flag.
(EF_RH850_CACHE): Likewise.
(EF_RH850_MMU): Likewise.
(EF_RH850_DATA_ALIGN8): Likewise.
(SHT_RENESAS_IOP): Fix typo in name.
(SHT_RENESAS_INFO): Define.
(V850_NOTE_SECNAME): Define.
(SIZEOF_V850_NOTE): Define.
(V850_NOTE_NAME): Define.
(enum v850_notes): New enum.
(NUM_V850_NOTES): Define.
ld/ChangeLog
2015-02-24 Nick Clifton <nickc@redhat.com>
* Makefile.am (ev850.c): Add dependency upon
$(srcdir)/emultempl/v850elf.em.
(ev850_rh850.c): Likewise.
* Makefile.in: Regenerate.
* emultempl/v850elf.em: New file.
* emulparams/v850.sh (EXTRA_EM_FILE): Define.
* emulparams/v850_rh850.sh (EXTRA_EM_FILE): Define.
* scripttempl/v850.sc: Add .note.renesas section.
* scripttempl/v850_rh850.sc: Likewise.
ld/testsuite
* ld-elf/extract-symbol-1sec.d: Expect to fail on the V850.
ld * scripttempl/avr.sc: Add new user_signatures region. Define and Use
symbols for all region lengths.
* scripttempl/avrtiny.sc: Define and use symbols for all region lengths.
testsuite * ld-avr/region_overflow.d: New test.
* ld-avr/region_overflow.s: Likewise.
LTO output objects have an STT_FILE symbol using the name of the file,
a temporary file. This results in executables that can't be exactly
reproduced, so the file name needs to be dropped. We don't want to
lose all file symbols when linking a mix of lto and non-lto objects as
a file symbol can be used to figure which source file generated a
given local symbol. So lto output objects need to be marked.
I chose to mark lto output objects with a new bfd flag. This flag is
also used to fix a bug in the link-once handling; An object being
loaded after "loading_lto_outputs" is set might be one extracted from
an archive to satisfy new references from lto objects, not an lto
object itself.
The new flag is copied from archive to elements, and the same done
for no_export. This fixes a bug in that --exclude-libs doesn't work
with thin archives. I'm not completely happy with this part of the
patch and may revist this to avoid the hack in
_bfd_look_for_bfd_in_cache.
PR ld/17973
include/
* bfdlink.h (struct bfd_link_info): Delete loading_lto_outputs.
bfd/
* bfd.c (struct bfd): Add lto_output.
* linker.c (_bfd_handle_already_linked): Explicitly test for
objects added by the lto plugin.
* opncls.c (_bfd_new_bfd_contained_in): Copy lto_output and
no_export flags from archive.
* archive.c (open_nested_file): New function, setting lto_output
and no_export, extracted from..
(find_nested_archive): ..here. Flip params. Rename from
_bfd_find_nested_archive.
(_bfd_get_elt_at_filepos): Correct var typo. Use open_nested_file.
(_bfd_look_for_bfd_in_cache): Copy no_export.
* elflink.c (elf_link_add_object_symbols): Remove now unnecessary
my_archive->no_export test.
(elf_link_input_bfd): Drop existing lto_output STT_FILE syms.
Don't use the file name when adding lto_output STT_FILE sym.
* bfd-in2.h: Regenerate.
ld/
* ldlang.h (struct lang_input_statement_flags): Add lto_output.
* ldlang.c (lang_process): Don't set loading_lto_outputs.
* ldfile.c (ldfile_try_open_bfd): Transfer entry flags.lto_output
to bfd.
* plugin.c (add_input_file, add_input_library): Set flags.lto_output.
Gold supports:
--map-whole-files Map whole files to memory (default on 64-bit hosts)
--no-map-whole-files Map relevant file parts to memory (default on 32-bit hosts)
This patch adds --[no-]map-whole-files command line options for gold
compatibility. They are ignored for ld.
* lexsup.c (ld_options): Add --[no-]map-whole-files for gold
option compatibility.
If plugin didn't claim the file, unmap the buffer.
* plugin.c (plugin_input_file_t): Add use_mmap.
(plugin_pagesize): New.
(get_view): Use plugin_pagesize. Set use_mmap if mmap is used.
(plugin_load_plugins): Initialize plugin_pagesize.
(plugin_maybe_claim): Unmap the buffer if plugin didn't claim the
file.
Offset passed to mmap must be a multiple of the page size. This patch
aligns offset passed to mmap.
* plugin.c (get_view): Align offset passed to mmap.
When plugin isn't active or there is no thing more to claim, we don't
need to call bfd_check_format.
* ldfile.c (ldfile_try_open_bfd): Don't call bfd_check_format
if plugin isn't active or there is no thing more to claim.
There is no need to call bfd_check_format. We should just check format
against bfd_object directly.
* plugin.c (plugin_maybe_claim): Check format against bfd_object
directly.
This patch removes the argument of pointer to struct ld_plugin_input_file.
This is the first step to extract a plugin_object_p out of
plugin_maybe_claim for BFD.
* plugin.c: Include "libbfd.h".
(plugin_strdup): New.
(plugin_maybe_claim): Remove the argument of pointer to struct
ld_plugin_input_file. Open and handle input entry.
* plugin.h (plugin_maybe_claim): Updated.
* ldfile.c (ldfile_try_open_bfd): Call plugin_maybe_claim directly
without passing a pointer to struct ld_plugin_input_file.
* ldmain.c: Don't include "libbfd.h".
(add_archive_element): Call plugin_maybe_claim directly without
passing a pointer to struct ld_plugin_input_file.
This patch uses mmap if it is available and works. It also caches the
view buffer for get_view.
* configure.ac: Add AC_FUNC_MMAP.
* config.in: Regenerated.
* configure: Likewise.
* plugin.c: Include <sys/mman.h>.
(MAP_FAILED): New. Defined if not defined.
(PROT_READ): Likewise.
(MAP_PRIVATE): Likewise.
(view_buffer_t): New.
(plugin_input_file_t): Add view_buffer.
(get_view): Try mmap and cache the view buffer.
(plugin_maybe_claim): Initialize view_buffer.
This patch closes fd only if fd != -1.
* plugin.c (release_input_file): Set fd to -1 after closing it.
(plugin_maybe_claim): Close fd only if fd != -1.
This patchs adds plugin_input_file_t to implement get_input_file, get_view
and release_input_file. The maximum memeory overhead per IR input file
are about 40 bytes for plugin_input_file_t plus the memory to store input
IR filename. According to
http://gcc.gnu.org/wiki/whopr/driver
RELEASE_INPUT_FILE: Function pointer to the linker interface that
releases a file descriptor for a claimed input file. The plug-in library
must call this interface for each file descriptor obtained by the "get
input file" interface. It must release all such file descriptors before
returning from the WPA phase.
However, GCC plug-in library doesn't use the "get input file" interface.
It processed the IR input in the claim file handler. Since the the file
descriptor opened for the IR input was unused after the claim file
handler returns and GCC plug-in library before GCC 5 doesn't call the
RELEASE_INPUT_FILE function pointer, ld closed the file descriptor to
avoid leaking file descriptor. But this approach doesn't work with
other plug-in libraries which uses the "get input file", "get view" and
"release input file" interfaces. To avoid file descriptor leak with
GCC prior to GCC 5 and support other plug-in libraries at the same time,
we close the file descriptor only if the input IR file is a bfd_object
file. This scheme doesn't work when a plug-in library needs the file
descriptor and its IR is stored in bfd_object file.
PR ld/17878
* plugin.c: Include <errno.h>.
(errno): New. Declare if needed.
(plugin_input_file_t): New.
(get_input_file): Implemented.
(get_view): Likewise.
(release_input_file): Likewise.
(add_symbols): Updated.
(get_symbols): Likewise.
(plugin_maybe_claim): Allocate a plugin_input_file_t. Close fd
only for a bfd_object input.
Moving .toc out of .got caused us to lose toc sorting and multi-toc
support.
* emultempl/ppc64elf.em (toc_section_name): New var.
(ppc_after_open): Set it.
(ppc_before_allocation): Use it.
(gld${EMULATION_NAME}_after_allocation): Here too.
The changes to reorder sections for better relro protection on powerpc64,
3e2b0f31, 23283c1b, and 5ad18f16, run into a problem with xlc.
xlc -qdatalocal puts global variables into .toc, which means that .toc
must be writable. The simplest way to accomplish this is to edit the
linker script to remove .toc sections from .got on detecting xlc object
files.
bfd/
* elf64-ppc.h (struct ppc64_elf_params): Add "object_in_toc".
* elf64-ppc.c (ppc64_elf_add_symbol_hook): Assume that global symbols
in .toc indicate xlc compiled code that might require a rw .toc.
ld/
* emulparams/elf64ppc.sh (INITIAL_READWRITE_SECTIONS): Define.
* emultempl/ppc64elf.em (params): Init new field.
(ppc_after_open): New function.
(LDEMUL_AFTER_OPEN): Define.
* ldlang.c (lang_final): Whitespace fix.
ld/testsuite/
* ld-powerpc/tocvar.d, * ld-powerpc/tocvar.s: New test.
* ld-powerpc/tocnovar.d, * ld-powerpc/tocnovar.s: New test.
* ld-powerpc/powerpc.exp: Run tocvar and tocnovar.
This patch fixes PR 4643 by allowing symbols in the LENGTH and ORIGIN
fields of MEMORY regions. Previously, only constants and constant
expressions are allowed.
For the AVR target, this helps define memory constraints more
accurately (per device), without having to create a ton of device
specific linker scripts.
ld/
PR 4643
* ldexp.c (fold_name): Fold LENGTH only after
lang_first_phase_enum.
* ldgram.y (memory_spec): Don't evaluate ORIGIN and LENGTH
rightaway.
* ldlang.h (struct memory_region_struct): Add origin_exp and
length_exp fields.
* ldlang.c (lang_do_memory_regions): New.
(lang_memory_region_lookup): Initialize origin_exp and
length_exp fields.
(lang_process): Call lang_do_memory_regions.
ld/testsuite/
* ld-scripts/memory.t: Define new symbol tred.
* ld-scripts/memory_sym.t: New.
* ld-scripts/script.exp: Perform MEMORY with symbols test, and
conditionally check values of linker symbols.
.toc1 is the second level TOC section used by gcc's -mminimal-toc. It
too should be read-only after relocation. Also, the last patch
description mentioned .sbss moving but didn't actually do that, so fix
that problem. .tocbss (whatever that is) was before .sbss previously,
so move that one too.
* emulparams/elf64ppc.sh (OTHER_SDATA_SECTIONS): Use in place of..
(OTHER_BSS_SYMBOLS): ..this.
(OTHER_PLT_RELOC_SECTIONS): Don't define.
(OTHER_GOT_RELOC_SECTIONS): Add rela.toc1 and rela.tocbss.
(OTHER_READWRITE_SECTIONS): Don't define. Move .toc1 to..
(OTHER_RELRO_SECTIONS_2): ..here.
* scripttempl/elf.sc: Move SBSS too when DATA_SDATA.
When creating a linker mapfile (using -Map=MAPFILE), we previously would
always try to evaluate the expression from a PROVIDE statement.
However, this is not always safe, consider:
PROVIDE (foo = 0x10);
PROVIDE (bar = foo);
In this example, if neither 'foo' or 'bar' is needed, then while
generating the linker mapfile evaluating the expression for 'foo' is
harmless (just the value 0x10). However, evaluating the expression for
'bar' requires the symbol 'foo', which is undefined. This used to cause
a fatal error.
This patch changes the behaviour, so that when the destination of the
PROVIDE is not defined (that is the PROVIDE is not going to provide
anything) the expression is not evaluated, and instead a special string
is displayed to indicate that the linker is discarding the PROVIDE
statement.
This change not only fixes the spurious undefined symbol error, but also
means that a user can now tell if a PROVIDE statement has provided
anything by inspecting the linker mapfile, something that could not be
done before.
ld/ChangeLog:
* ldlang.c (print_assignment): Only evaluate the expression for a
PROVIDE'd assignment when the destination is being defined.
Display a special message for PROVIDE'd symbols that are not being
provided.
ld/testsuite/ChangeLog:
* ld-scripts/provide-4.d: New file.
* ld-scripts/provide-4-map.d: New file.
* ld-scripts/provide-4.t: New file.
* ld-scripts/provide-5.d: New file.
* ld-scripts/provide-5.s: New file.
* ld-scripts/provide-5-map.d: New file.
* ld-scripts/provide-5.t: New file.
* ld-scripts/provide.exp: Run the provide-4.d and provide-5.d
tests.
This moves .got too, which requires .sdata and .sbss to move with it,
because these sections share addressing via the toc pointer and with
small-model code must be within a 16-bit signed offset. .plt, .iplt
and .branch_lt must also be moved since they are addressed via a
32-bit offset from the toc pointer, and we might have a very large
.data section.
This change means we may have some bss style sections before the data
segment, necessitating another PT_LOAD header. Also, since _edata is
defined at the end of the data segment it's possible with an empty
.data to have _edata at the end of .plt which looks a little unusual
since .plt is a bss style section. That should only happen rarely in
real world binaries, but does occur in the ld testsuite.
ld/
* emulparams/elf64ppc.sh (BSS_PLT): Don't define.
(OTHER_READWRITE_SECTIONS): Move .branch_lt to..
(OTHER_RELRO_SECTIONS_2): ..here.
(DATA_GOT, SEPARATE_GOTPLT, DATA_SDATA, DATA_PLT,
PLT_BEFORE_GOT): Define.
* scripttempl/elf.sc: Handle DATA_SDATA and DATA_GOT/DATA_PLT/
PLT_BEFORE_GOT combination.
(DATA_GOT, SDATA_GOT): Don't define if either is already defined.
ld/testsuite/
* ld-powerpc/ambiguousv1.d,
* ld-powerpc/ambiguousv1b.d,
* ld-powerpc/ambiguousv2.d,
* ld-powerpc/ambiguousv2b.d,
* ld-powerpc/elfv2exe.d,
* ld-powerpc/elfv2so.d,
* ld-powerpc/tlsexe.r,
* ld-powerpc/tlsexetoc.r,
* ld-powerpc/tlsso.r,
* ld-powerpc/tlstocso.r: Update.
More sections can be read-only after relocation. .opd is an obvious
candidate.
* emulparams/elf64ppc.sh (OTHER_READWRITE_SECTIONS): Move .opd to..
(OTHER_RELRO_SECTIONS_2): ..here, new define.
* scripttempl/elf.sc: Add OTHER_RELRO_SECTIONS_2.
Running lang_common before garbage collection means slightly less work
in garbage collection code, since common symbols should no longer
appear there. It does have the side effect of keeping linker script
symbols (at least those defined outside of sections) global too,
hence some testsuite churn.
bfd/
PR 17165
* elf-bfd.h (ELF_COMMON_DEF): Note that this might be true for
linker script assignments too.
* elflink.c (elf_gc_sweep_symbol): Don't drop ELF_COMMON_DEF syms.
(bfd_elf_gc_mark_dynamic_ref_symbol): Similarly.
ld/
PR 17165
* ldlang.c (lang_process): Run lang_common before lang_gc_sections.
ld/testsuite/
* ld-gc/pr14265.d,
* ld-cris/tls-gc-68.d,
* ld-cris/tls-gc-69.d,
* ld-cris/tls-gc-70.d,
* ld-cris/tls-gc-71.d,
* ld-cris/tls-gc-75.d,
* ld-cris/tls-gc-76.d,
* ld-cris/tls-gc-79.d,
* ld-mmix/bpo-10.d,
* ld-mmix/bpo-11.d: Update.
If no object files have .eh_frame, but some shared library does, then
ld creates a .eh_frame_hdr section using the shared library bfd. This
is silly since shared library .eh_frame sections don't contribute to
the output .eh_frame and thus no .eh_frame_hdr is needed.
Also, the bfd section list and count is cleared for shared libraries,
and a zero section count used as a flag in lang_check to omit a call
to bfd_merge_private_bfd_data for shared libraries. If we create a
section on a shared lib bfd then ld will wrongly attempt to merge the
shared library private bfd data.
PR 17742
* ld/emultempl/elf32.em (gld${EMULATION_NAME}_after_open): Exclude
shared libraries in loop looking for .eh_frame sections.
Similarly for build-id loop.
The AVR target has an elf header flag to indicate if an object was
assembler ready for linker relaxation. If a partial link is performed
then it is important that the link-relax flag in the output object is
set correctly, otherwise, during the final link, we might try to perform
linker relaxation on code that was not assembled suitably.
As the link-relax elf header covers the entire object file we must be
conservative when setting the flag in the output object, so, for a
partial link, any input object that does not have the link-relax flag
set will cause the output object to also not have the link-relax flag
set.
This conservative approach could be softened in future, we only need to
disable the link relax flag if an input file is not marked link-relax
ready, and the input file contains a relaxable section. However, I've
left this optimisation for a later day.
For the final link I've overloaded the use of the link-relax elf header
flag, in a final executable, the flag now indicates if the executable
was built with linker relaxation on or not.
ld/ChangeLog:
* emultempl/avrelf.em: Add include of elf/avr.h.
(avr_finish): New function.
(LDEMUL_FINISH): Added.
ld/testsuite/ChangeLog:
* ld-avr/relax-elf-flags-01.d: New file.
* ld-avr/relax-elf-flags-02.d: New file.
* ld-avr/relax-elf-flags-03.d: New file.
* ld-avr/relax-elf-flags-04.d: New file.
* ld-avr/relax-elf-flags-05.d: New file.
* ld-avr/relax-elf-flags-06.d: New file.
* ld-avr/relax-elf-flags-07.d: New file.
* ld-avr/relax-elf-flags-08.d: New file.
* ld-avr/relax-elf-flags-a.s: New file.
* ld-avr/relax-elf-flags-b.s: New file.
or maybe not just yet, but this is better than a FIXME.
* ldexp.c (update_definedness): Return false if script symbol is
redefining a strong symbol in an object.
(exp_fold_tree_1 <etree_assign>): Set up for reporting a multiple
definition error, but for now leave disabled.
Trying to use the SEC_LINKER_CREATED section flag to determine whether
a symbol is linker defined fails to work on targets like alpha that
define special SEC_COMMON sections. These might contain symbols that
originated in an object file.
include/
* bfdlink.h (struct bfd_link_hash_entry): Comment non_ir_ref. Add
linker_def.
bfd/
* elflink.c (_bfd_elf_define_linkage_sym): Set linker_def.
* linker.c (_bfd_generic_link_add_one_symbol): Clear linker_def
for CDEF, DEF, DEFW, COM.
ld/
* ldexp.c (exp_fold_tree_1 <etree_provide>): Test linker_def.
ld/testsuite/
* ld-powerpc/sdabase.s,
* ld-powerpc/sdabase.t,
* ld-powerpc/sdabase.d: New test.
* ld-powerpc/sdabase2.t,
* ld-powerpc/sdabase2.d: New test.
* ld-powerpc/powerpc.exp: Run them.
The old code missed testing bfd_link_hash_undefweak, and wrongly
excluded bfd_link_hash_common symbols. It is also clearer to invert
the set of enum bfd_link_hash_type values tested.
bfd_link_hash_indirect and bfd_link_hash_warning will never appear
here.
* ldexp.c (update_definedness): Correct logic setting by_object.
This moves support code for DEFINED to ldexp.c where it is used,
losing the lang_ prefix on identifiers. Two new functions are needed
to initialize and clean up to hash table, but other than that there
are no functional changes here.
* ldexp.c (struct definedness_hash_entry, definedness_table)
(definedness_newfunc, symbol_defined, update_definedness): Move
and rename from..
* ldlang.h (struct lang_definedness_hash_entry): ..here,..
* ldlang.c (lang_definedness_table, lang_definedness_newfunc)
(lang_symbol_defined, lang_update_definedness): ..and here.
* ldexp.c (ldexp_init, ldexp_finish): New functions, extracted from..
* ldlang.c (lang_init, lang_finish): ..here.
* ldexp.h (ldexp_init, ldexp_finish): Declare.
* ldlang.h (lang_symbol_defined, lang_update_definedness): Delete.
* ldmain.c (main): Call ldexp_init and ldexp_finish.
When there are both PLT and GOT references to the same function symbol,
linker will create a GOTPLT slot for PLT entry and a GOT slot for GOT
reference. A run-time JUMP_SLOT relocation is created to update the
GOTPLT slot and a run-time GLOB_DAT relocation is created to update the
GOT slot. Both JUMP_SLOT and GLOB_DAT relocations will apply the same
symbol value to GOTPLT and GOT slots, respectively, at run-time.
This optimization combines GOTPLT and GOT slots into a single GOT slot
and removes the run-time JUMP_SLOT relocation. It replaces the regular
PLT entry:
indirect jump [GOTPLT slot]
push relocation index
jump PLT0
with an GOT PLT entry with an indirect jump via the GOT slot:
indirect jump [GOT slot]
nop
and resolves PLT reference to the GOT PLT entry.
We must avoid this optimization if pointer equality is needed since
we don't clear symbol value in this case and the dynamic linker won't
update the GOT slot. Otherwise, the resulting binary will get into an
infinite loop at run-time.
bfd/
* elf32-i386.c (elf_i386_got_plt_entry): New.
(elf_i386_pic_got_plt_entry): Likewise.
(elf_i386_link_hash_entry): Add plt_got.
(elf_i386_link_hash_table): Likewise.
(elf_i386_link_hash_newfunc): Initialize plt_got.offset to -1.
(elf_i386_get_local_sym_hash): Likewise.
(elf_i386_check_relocs): Create the GOT PLT if there are both
PLT and GOT references when the regular PLT is used.
(elf_i386_allocate_dynrelocs): Use the GOT PLT if there are
both PLT and GOT references unless pointer equality is needed.
(elf_i386_relocate_section): Also check the GOT PLT when
resolving R_386_PLT32.
(elf_i386_finish_dynamic_symbol): Use the GOT PLT if it is
available.
* elf64-x86-64.c (elf_x86_64_link_hash_entry): Add plt_got.
(elf_x86_64_link_hash_table): Likewise.
(elf_x86_64_link_hash_newfunc): Initialize plt_got.offset to -1.
(elf_x86_64_get_local_sym_hash): Likewise.
(elf_x86_64_check_relocs): Create the GOT PLT if there are both
PLT and GOT references when the regular PLT is used.
(elf_x86_64_allocate_dynrelocs): Use the GOT PLT if there are
both PLT and GOT references unless pointer equality is needed.
(elf_x86_64_relocate_section): Also check the GOT PLT when
resolving R_X86_64_PLT32.
(elf_x86_64_finish_dynamic_symbol): Use the GOT PLT if it is
available.
ld/
* emulparams/elf_i386.sh (TINY_READONLY_SECTION): New.
* emulparams/elf_x86_64.sh (TINY_READONLY_SECTION): Add .plt.got.
ld/testsuite/
* ld-i386/i386.exp: Add run-time relocation tests for plt-main.
* ld-i386/plt-main.rd: New file.
* ld-x86-64/plt-main-bnd.dd: Likewise.
* ld-x86-64/plt-main.rd: Likewise.
* ld-x86-64/x86-64.exp: Add run-time relocation tests for
plt-main.
Alignment of plt stubs was broken, firstly because the option was
being dropped due to the alignment value not being set in the "params"
struct used in elf64-ppc.c, and secondly due to not calculating the
number of alignment boundary crossings correctly.
bfd/
* elf64-ppc.c (plt_stub_pad): Correct.
ld/
* ld.texinfo: Correct --plt-align documentation.
* emultempl/ppc64elf.em (plt_stub_align): Delete. Use and set
params.plt_stub_align instead.
When performing linker relaxation, reduce the size of symbols that span
the deleted bytes. This ensures that, for example, function symbols
will have the correct size.
bfd/ChangeLog:
* elf32-avr.c (elf32_avr_relax_delete_bytes): During linker
relaxation, reduce the size of symbols that span the deleted
bytes.
ld/ChangeLog:
* testsuite/ld-avr/relax-02.d: Update to check size of symbols has
changed.
* testsuite/ld-avr/relax-03.d: Likewise.
Symbols at the very end of a section were not being updated correctly
when linker relaxation takes place due to the use of '<' instead of
'<='. Added a couple of tests to cover this behaviour.
bfd/ChangeLog:
* elf32-avr.c (elf32_avr_relax_delete_bytes): Modify symbols
located at the very end of the section.
ld/ChangeLog:
* ld/testsuite/ld-avr/relax-02.d: New file.
* ld/testsuite/ld-avr/relax-02.s: New file.
* ld/testsuite/ld-avr/relax-03.d: New file.
* ld/testsuite/ld-avr/relax-03.s: New file.
2014-10-22 Tejas Belagod <tejas.belagod@arm.com>
bfd/
* bfd-in.h (bfd_elf64_aarch64_set_options): Add a parameter.
* bfd-in2.h (bfd_elf64_aarch64_set_options): Likewise.
* elfnn-aarch64.c (aarch64_erratum_835769_stub): New.
(elf_aarch64_stub_type): Add new type
aarch64_stub_erratum_835769_veneer.
(elf_aarch64_stub_hash_entry): New fields for erratum 835769.
(aarch64_erratum_835769_fix): New data struct to record erratum
835769.
(elf_aarch64_link_hash_table: Global flags for 835769.
(aarch64_build_one_stub): Add case for 835769.
(aarch64_size_one_stub): Likewise.
(aarch64_mem_op_p, aarch64_mlxl_p,
aarch64_erratum_sequence,erratum_835769_scan):
New. Decode and scan functions for erratum 835769.
(elf_aarch64_create_or_find_stub_sec): New.
(elfNN_aarch64_size_stubs): Look for erratum 835769 and record
them.
(bfd_elfNN_aarch64_set_options: Set global flag for 835769.
(erratum_835769_branch_to_stub_data,
make_branch_to_erratum_835769_stub):New. Connect up all the
erratum stubs to occurances by branches.
(elfNN_aarch64_write_section): New hook.
(aarch64_map_one_stub): Output erratum stub symbol.
(elfNN_aarch64_size_dynamic_sections): Init mapping symbol
information for erratum 835769.
(elf_backend_write_section): Define.
ld/
* emultempl/aarch64elf.em: Add command-line option for erratum
835769.
ld/testsuite/
* ld-aarch64/aarch64-elf.exp (aarch64elftests): Drive erratum
835769 tests.
* ld-aarch64/erratum835769.d: New.
* ld-aarch64/erratum835769.s: New.
For binary ouput, we don't have an ELF bfd output so can't access
elf_elfheader. The elf64-ppc.c changes are really just a tidy,
triggered by looking at all places where the abiversion bits are
accessed.
bfd/
* elf64-ppc.c (ppc64_elf_before_check_relocs): Do .opd processing
even when output is not ppc64 ELF. Remove redundant tests on
type of input bfd.
ld/
PR 17488
* emultempl/ppc64elf.em (gld${EMULATION_NAME}_finish): Don't attempt
to access ELF header e_flags when not ppc64 ELF output.
* ldlex.l (INPUTLIST): New start condition.
(comment pattern, ",", "(", ")", "AS_NEEDED")
({FILENAMECHAR1}{FILENAMECHAR}*, "-l"{FILENAMECHAR}+)
(quoted string pattern, whitespace pattern): Add INPUTLIST to
valid start conditions.
(<INPUTLIST>"="{FILENAMECHAR1}{FILENAMECHAR}*): New NAME rule.
(ldlex_inputlist): New start-condition-setter function.
* ldgram.y (input_list1): Rename from input_list. All recursive
use changed.
(input_list): New wrapper rule for input_list1, setting
INPUTLIST lexer state for the duration of parsing input_list1.
All this to say INPUT(=/path/to/file) and not be forced to use
INPUT("=/path/to/file") whenever there's a need to force a sysroot-
prefix. Still, IMHO it seems better to make use of a previously
invalid syntax and not only change the meaning of quoted =-prefixed
paths (though arguably that's not very useful before this patchset).
This got a little bit hairier than I'd expected: I had to add a new
lexer state (aka. start condition) to avoid a first "=" being lexed as
the token "=", despite that not making sense in constructs expecting
file-names in the first place. (The grammar doesn't allow for
expressions in any part of those lists.) I guess I *could* have made
it work using that token anyway, but I didn't like the idea that you
would be able to separate the "=" from the rest of the file-name with
whitespace.