This commit does most of the mechanical removal. IOW, the easy part.
procfs.c isn't touched beyond removing a couple obvious bits that are
guarded by a couple macros defined in config/alpha/nm-osf3.h. Going
beyond that for procfs.c & co would be a harder excision that
potentially affects Solaris.
Some comments in the generic alpha code ABIs that may still be
relevant and I wouldn't know what to do with them. That can always be
done on a separate pass, preferably by someone who can test on alpha.
A couple other spots have references to OSF/Tru64 and related files
being removed, but it felt like removing them would make things worse,
not better. We can revisit those when we next need to touch that
code.
I didn't remove a reference to osf in testsuite/lib/future.exp, as I
believe that code is imported from DejaGNU.
Built and tested on x86_64 Fedora 20, with --enable-targets=all.
Tested that building for --target=alpha-osf3 on x86_64 Fedora 20
fails with:
checking for default auto-load directory... $debugdir:$datadir/auto-load
checking for default auto-load safe-path... $debugdir:$datadir/auto-load
*** Configuration alpha-unknown-osf3 is obsolete.
*** Support has been REMOVED.
make[1]: *** [configure-gdb] Error 1
make[1]: Leaving directory `build-osf'
make: *** [all] Error 2
gdb/
2014-10-17 Pedro Alves <palves@redhat.com>
* Makefile.in (ALL_64_TARGET_OBS): Remove alpha-osf1-tdep.o.
(HFILES_NO_SRCDIR): Remove config/alpha/nm-osf3.h.
(ALLDEPFILES): Remove alpha-nat.c, alpha-osf1-tdep.c and
solib-osf.c.
* NEWS: Mention that support for alpha*-*-osf* has been removed.
* ada-lang.h [__alpha__ && __osf__]
(ADA_KNOWN_RUNTIME_FILE_NAME_PATTERNS): Delete.
* alpha-nat.c, alpha-osf1-tdep.c: Delete files.
* alpha-tdep.c (alpha_gdbarch_init): Remove reference to
GDB_OSABI_OSF1.
* config/alpha/alpha-osf3.mh, config/alpha/nm-osf3.h: Delete
files.
* config/djgpp/fnchange.lst (config/alpha/alpha-osf1.mh)
(config/alpha/alpha-osf2.mh, config/alpha/alpha-osf3.mh): Delete.
* configure: Regenerate.
* configure.ac: Remove references to osf.
* configure.host: Handle alpha*-*-osf* in the obsolete hosts
section. Remove all other references to osf.
* configure.tgt: Add alpha*-*-osf* to the obsolete targets section.
Remove all other references to osf.
* dec-thread.c: Delete file.
* defs.h (GDB_OSABI_OSF1): Delete.
* inferior.h (START_INFERIOR_TRAPS_EXPECTED): New unconditionally
defined.
* osabi.c (gdb_osabi_names): Delete "OSF/1".
* procfs.c (procfs_debug_inferior) [PROCFS_DONT_TRACE_FAULTS]:
Delete code.
(unconditionally_kill_inferior)
[PROCFS_NEED_CLEAR_CURSIG_FOR_KILL]: Delete code.
* solib-osf.c: Delete file.
gdb/testsuite/
2014-10-17 Pedro Alves <palves@redhat.com>
* gdb.base/callfuncs.exp: emove references to osf.
* gdb.base/sigall.exp: Likewise.
* gdb.gdb/selftest.exp: Likewise.
* gdb.hp/gdb.base-hp/callfwmall.exp: Likewise.
* gdb.mi/non-stop.c: Likewise.
* gdb.mi/pthreads.c: Likewise.
* gdb.reverse/sigall-precsave.exp: Likewise.
* gdb.reverse/sigall-reverse.exp: Likewise.
* gdb.threads/pthreads.c: Likewise.
* gdb.threads/pthreads.exp: Likewise.
gdb/doc/
2014-10-17 Pedro Alves <palves@redhat.com>
* gdb.texinfo (Ada Tasks and Core Files): Delete mention of Tru64.
(SVR4 Process Information): Delete mention of OSF/1.
clear_threads_listing_context is used for thread listing methods other
than the xml based, but it's only defined when HAVE_LIBEXPAT is defined.
gdb/
2014-10-17 Pedro Alves <palves@redhat.com>
* remote.c (clear_threads_listing_context): Move higher up, out of
the HAVE_LIBEXPAT guard.
I am confused by the noargs checking at each proc in commands.exp,
if [target_info exists noargs] {
verbose "Skipping progvar_simple_while_test because of noargs."
return
}
gdb_test_no_output "set args 5" "set args in progvar_simple_while_test"
if { ![runto factorial] } then { gdb_suppress_tests }
# Don't depend upon argument passing, since most simulators don't
# currently support it. Bash value variable to be what we want.
gdb_test "p value=5" ".*" "set value to 5 in progvar_simple_if_test #2"
They are conflicting to me. If the argument passing can't be done on
the target, we skip this test, why do we still have to set value below?
On the other hand, the test case is compiled with -DFAKEARGV, it doesn't
get anything from argv[1], why do we need to skip it if noargs is true?
I don't find any useful clues from the git log, as the code is quite
old, predating import to sourceware cvs. However, I find something
useful from the ChangeLog.
Thu Jul 20 13:28:36 1995 Jeffrey A. Law <law@rtl.cygnus.com>
.....
* gdb.base/commands.exp: Protect tests which need arguments with
$noargs conditionals.
Mon Apr 21 13:38:58 1997 Fred Fish <fnf@cygnus.com>
* gdb.base/run.c: Use FAKEARGV to build test executable that
does not require a command line arg, since most simulators
don't currently support passing such an arg into the simulated
program.
* gdb.base/commands.exp: Change tests to insert the proper
value as the arg to the first recursive factorial call. Change
compilation line to define FAKEARGV at compile time.
Jeff added noargs checking as argument is passed to the inferior. Then,
I presume Fred wanted to run this test on simulators which don't support
argument passing, and change the code not get input from argv. (I guess)
noargs wasn't set in simulator board files at that moment.
Since Fred changed test to set input by gdb, instead of getting input
from argv, the test should be able to run on target doesn't support
argument passing, such as simulator and gdbserver.
This patch is to remove these checks to noargs and "set args". I run
commands.exp with these board files, and no fail is found
- unix and native-gdbserver
- arm-none-eabi with qemu
- gdbserver on arm-linux-gnueabi with qemu
gdb/testsuite:
2014-10-17 Yao Qi <yao@codesourcery.com>
* gdb.base/commands.exp (gdbvar_complex_if_while_test): Don't check
'target_info exists noargs'.
(test_command_prompt_position): Likewise.
(progvar_simple_if_test): Don't check 'target_info exists noargs'.
Remove "set args".
(progvar_simple_while_test): Likewise.
(progvar_complex_if_while_test): Likewise.
(if_while_breakpoint_command_test): Likewise.
(infrun_breakpoint_command_test): Likewise.
(breakpoint_command_test): Likewise.
(watchpoint_command_test): Likewise.
(bp_deleted_in_command_test): Likewise.
(temporary_breakpoint_commands): Likewise.
strtold is currently used to decode templates which have a floating-point
value encoded inside; but this routine is not available on some systems,
such as Solaris 2.9 for instance.
This patch fixes the issue by replace the use of strtold by strtod.
It reduces a bit the precision, but it should still remain acceptable
in most cases.
libiberty/ChangeLog:
* d-demangle.c: Replace strtold with strtod in global comment.
(strtold): Remove declaration.
(strtod): New declaration.
(dlang_parse_real): Declare value as double instead of long
double. Replace call to strtold by call to strtod.
Update format in call to snprintf.
Some Darwin kernels return values out of bounds for gs and fs segments.
With this commit, they are masked to avoid garbage.
gdb/ChangeLog:
* i386-darwin-nat.c (i386_darwin_fetch_inferior_registers)
(i386_darwin_store_inferior_registers): Sanitize gs and fs values
on amd64.
The condition [target_info exists noargs] is checked when
remotetimeout.exp was added
https://sourceware.org/ml/gdb-patches/2005-02/msg00052.html
noargs means GDB does not support argument passing for inferior,
rather than doesn't support argument passing to GDB. remotetimeout.exp
passes -l to GDB only, doesn't pass any arguments to the inferior.
This patch is to remove such unnecessary checking, and
remotetimeout.exp then can be run with native-gdbserver board file.
gdb/testsuite:
2014-10-16 Yao Qi <yao@codesourcery.com>
* gdb.base/remotetimeout.exp: Remove noargs checking.
For binary ouput, we don't have an ELF bfd output so can't access
elf_elfheader. The elf64-ppc.c changes are really just a tidy,
triggered by looking at all places where the abiversion bits are
accessed.
bfd/
* elf64-ppc.c (ppc64_elf_before_check_relocs): Do .opd processing
even when output is not ppc64 ELF. Remove redundant tests on
type of input bfd.
ld/
PR 17488
* emultempl/ppc64elf.em (gld${EMULATION_NAME}_finish): Don't attempt
to access ELF header e_flags when not ppc64 ELF output.
In short relaxation is the linker's generation of stubs that fixes the
out-of-range jumps/branches in the original object file.
With this implementation, we are able to link a 456MB aarch64 application.
Tested:
1) Build natively on x86_64 and aarch64 machines.
2) Pass unit tests regarding relaxation.
Seems to me that we can simplify DEC thread's
target_update_thread_list implementation, avoiding the need to build
the array of GDB threads.
I have no way to test this, but then again support for Tru64 is about
to be removed.
Pushing anyway to have the last version in git be the cleanest one
should start from, if this file turns out to be resurrected in the
future.
gdb/
2014-10-15 Pedro Alves <palves@redhat.com>
* dec-thread.c (dec_thread_count_gdb_threads)
(dec_thread_add_gdb_thread): Delete.
(dec_thread_update_thread_list): Delete.
(dec_thread_find_new_threads): Rename to ...
(dec_thread_update_thread_list): ... this. Delete GDB-size
threads that are no longer found in dec_thread_list.
(resync_thread_list): Delete.
(dec_thread_wait): Call dec_thread_update_thread_list instead of
resync_thread_list.
This commit avoids the prune_threads call in the remote target's
target_update_thread_list's implementation, eliminating all the "thread
alive" RSP traffic (one packet per thread) whenever we fetch the
thread list.
IOW, this:
Sending packet: $Tp2141.2150#82...Packet received: OK
Sending packet: $Tp2141.214f#b7...Packet received: OK
Sending packet: $Tp2141.2141#82...Packet received: OK
... more T packets; it's one per previously known live thread ...
Sending packet: $qXfer:threads:read::0,fff#03...Packet received: l<threads>\n<thread id="p2141.2141" core="2"/>\n<thread id="p2141.214f" core="1"/>\n<thread id="p2141.2150" core="2"/>\n</threads>\n
Becomes:
Sending packet: $qXfer:threads:read::0,fff#03...Packet received: l<threads>\n<thread id="p2141.2141" core="2"/>\n<thread id="p2141.214f" core="1"/>\n<thread id="p2141.2150" core="2"/>\n</threads>\n
Tested on x86_64 Fedora 20, native gdbserver:
- tests the qXfer:threads:read method.
Tested on x86_64 Fedora 20, native gdbserver with qXfer:threads:read
force-disabled in gdbserver:
- So that GDB falls back to the qfThreadInfo/qsThreadInfo method.
And also manually smoked tested force disabling both
qXfer:threads:read and qfThreadInfo/qsThreadInfo in gdbserver.
gdb/
2014-10-15 Pedro Alves <palves@redhat.com>
* gdbthread.h (ALL_NON_EXITED_THREADS_SAFE): New macro.
* remote.c (remote_update_thread_list): Skip calling prune_threads
if any thread listing method is supported, and instead walk over
the set of remote threads listed, deleting those that are not
found in GDB's thread list.
When GDB wants to sync the thread list with the target's (e.g., due to
"info threads"), it calls update_thread_list:
update_thread_list (void)
{
prune_threads ();
target_find_new_threads ();
update_threads_executing ();
}
And then prune_threads does:
prune_threads (void)
{
struct thread_info *tp, *next;
for (tp = thread_list; tp; tp = next)
{
next = tp->next;
if (!thread_alive (tp))
delete_thread (tp->ptid);
}
}
Calling thread_live on each thread one by one is expensive.
E.g., on Linux, it ends up doing kill(SIG0) once for each thread. Not
a big deal, but still a bunch of syscalls...
With the remote target, it's cumbersome. That thread_alive call ends
up generating one T packet per thread:
Sending packet: $Tp2141.2150#82...Packet received: OK
Sending packet: $Tp2141.214f#b7...Packet received: OK
Sending packet: $Tp2141.2141#82...Packet received: OK
Sending packet: $qXfer:threads:read::0,fff#03...Packet received: l<threads>\n<thread id="p2141.2141" core="2"/>\n<thread id="p2141.214f" core="1"/>\n<thread id="p2141.2150" core="2"/>\n</threads>\n
That seems a bit silly when target_find_new_threads method
implementations will always fetch the whole current set of target
threads, and then add those that are not in GDB's thread list, to
GDB's thread list.
This patch thus pushes down the responsibility of pruning dead threads
to the target_find_new_threads method instead, so a target may
implement pruning dead threads however it wants.
Once we do that, target_find_new_threads becomes a misnomer, so the
patch renames it to target_update_thread_list.
The patch doesn't attempt to do any optimization to any target yet.
It simply exports prune_threads, and makes all implementations of
target_update_thread_list call that. It's meant to be a no-op.
gdb/
2014-10-15 Pedro Alves <palves@redhat.com>
* ada-tasks.c (print_ada_task_info, task_command_1): Adjust.
* bsd-uthread.c (bsd_uthread_find_new_threads): Rename to ...
(bsd_uthread_update_thread_list): ... this. Call prune_threads.
(bsd_uthread_target): Adjust.
* corelow.c (core_open): Adjust.
* dec-thread.c (dec_thread_find_new_threads): Update comment.
(dec_thread_update_thread_list): New function.
(init_dec_thread_ops): Adjust.
* gdbthread.h (prune_threads): New declaration.
* linux-thread-db.c (thread_db_find_new_threads): Rename to ...
(thread_db_update_thread_list): ... this. Call prune_threads.
(init_thread_db_ops): Adjust.
* nto-procfs.c (procfs_find_new_threads): Rename to ...
(procfs_update_thread_list): ... this. Call prune_threads.
(procfs_attach, procfs_create_inferior, init_procfs_targets):
Adjust.
* obsd-nat.c (obsd_find_new_threads): Rename to ...
(obsd_update_thread_list): ... this. Call prune_threads.
(obsd_add_target): Adjust.
* procfs.c (procfs_target): Adjust.
(procfs_notice_thread): Update comment.
(procfs_find_new_threads): Rename to ...
(procfs_update_thread_list): ... this. Call prune_threads.
* ravenscar-thread.c (ravenscar_update_inferior_ptid): Update
comment.
(ravenscar_wait): Adjust.
(ravenscar_find_new_threads): Rename to ...
(ravenscar_update_thread_list): ... this. Call prune_threads.
(init_ravenscar_thread_ops): Adjust.
* record-btrace.c (record_btrace_find_new_threads): Rename to ...
(record_btrace_update_thread_list): ... this. Adjust comment.
(init_record_btrace_ops): Adjust.
* remote.c (remote_threads_info): Rename to ...
(remote_update_thread_list): ... this. Call prune_threads.
(remote_start_remote, extended_remote_attach_1, init_remote_ops):
Adjust.
* sol-thread.c (check_for_thread_db): Adjust.
(sol_find_new_threads_callback): Rename to ...
(sol_update_thread_list_callback): ... this.
(sol_find_new_threads): Rename to ...
(sol_update_thread_list): ... this. Call prune_threads. Adjust.
(sol_get_ada_task_ptid, init_sol_thread_ops): Adjust.
* target-delegates.c: Regenerate.
* target.c (target_find_new_threads): Rename to ...
(target_update_thread_list): ... this.
* target.h (struct target_ops): Rename to_find_new_threads field
to to_update_thread_list.
(target_find_new_threads): Rename to ...
(target_update_thread_list): ... this.
* thread.c (prune_threads): Make extern.
(update_thread_list): Adjust.
We have three methods to list the current remote thread list:
1. The qXfer:threads:read method (the preferred one nowadays), builds a
remote thread list while parsing the XML, and then after the XML
parsing is done, goes over the built list and adds threads GDB doesn't
know about yet to GDB's list.
2. If the qXfer method isn't available, we fallback to using the
qfThreadInfo/qsThreadInfo packets. When we do this, we adds threads
to GDB's list immediately as we parse the qfThreadInfo/qsThreadInfo
packet replies.
3. And then if the previous method isn't available either, we try the
old deprecated qL packet. This path is already looking somewhat
broken for not using remote_notice_new_inferior to add threads to
GDB's list.
This patch makes all variants work in two passes, like the qXfer
method, and then makes all variants share the code path that adds
threads to GDB's list.
Tested on x86_64 Fedora 20 with native gdbserver.
gdb/
2014-10-15 Pedro Alves <palves@redhat.com>
* remote.c (remote_get_threadlist, remote_threadlist_iterator):
Add describing comment. Return -1 if the qL packet is not
supported.
(struct thread_item, thread_item_t): Move higher up in
the file. Add comments.
(struct threads_parsing_context): Move higher up in
the file, add comments, and remote to ...
(struct threads_listing_context): ... this.
(remote_newthread_step): Don't add the thread to GDB's thread
database here. Instead push it to the thread_listing_context
list.
(remote_find_new_threads): Rename to ...
(remote_get_threads_with_ql): ... this. Add target_ops and
targets_listing_context parameters. Pass down context.
(start_thread): Adjust.
(clear_threads_parsing_context): Rename to ...
(clear_threads_listing_context): ... this.
(remote_get_threads_with_qxfer): New, with parts salvaged from old
remote_threads_info.
(remote_get_threads_with_qthreadinfo): Ditto.
(remote_threads_info): Reimplement.
This finally reverts this bit of commit 929dfd4f:
2009-07-31 Pedro Alves <pedro@codesourcery.com>
Julian Brown <julian@codesourcery.com>
...
(resume): If this is a software single-stepping arch, and
displaced-stepping is enabled, use it for all single-step
requests.
...
That means that in non-stop (or really displaced-stepping) mode, on
software single-step archs - even those that only use sss breakpoints
to deal with atomic sequences, like PPC - if we have more than one
thread single-stepping, we'll always serialize the threads'
single-steps, as only one thread may be displaced stepping at a given
time, because there's only one scratch pad.
We originally did that because GDB didn't support having multiple
threads software-single-stepping simultaneously. The previous patches
fixed that limitation, so we can now finally revert this too.
Tested on:
- x86_64 Fedora 20, on top of the 'software single-step on x86'
series.
gdb/
2014-10-15 Pedro Alves <palves@redhat.com>
* infrun.c (resume): Don't force displaced-stepping for all
single-steps on software single-stepping archs.
This patch finally makes each thread have its own set of single-step
breakpoints. This paves the way to have multiple threads software
single-stepping, though this patch doesn't flip that switch on yet.
That'll be done on a subsequent patch.
gdb/
2014-10-15 Pedro Alves <palves@redhat.com>
* breakpoint.c (single_step_breakpoints): Delete global.
(insert_single_step_breakpoint): Adjust to store the breakpoint
pointer in the current thread.
(single_step_breakpoints_inserted, remove_single_step_breakpoints)
(cancel_single_step_breakpoints): Delete functions.
(breakpoint_has_location_inserted_here): Make extern.
(single_step_breakpoint_inserted_here_p): Adjust to walk the
breakpoint list.
* breakpoint.h (breakpoint_has_location_inserted_here): New
declaration.
(single_step_breakpoints_inserted, remove_single_step_breakpoints)
(cancel_single_step_breakpoints): Remove declarations.
* gdbthread.h (struct thread_control_state)
<single_step_breakpoints>: New field.
(delete_single_step_breakpoints)
(thread_has_single_step_breakpoints_set)
(thread_has_single_step_breakpoint_here): New declarations.
* infrun.c (follow_exec): Also clear the single-step breakpoints.
(singlestep_breakpoints_inserted_p, singlestep_ptid)
(singlestep_pc): Delete globals.
(infrun_thread_ptid_changed): Remove references to removed
globals.
(resume_cleanups): Delete the current thread's single-step
breakpoints.
(maybe_software_singlestep): Remove references to removed globals.
(resume): Adjust to use thread_has_single_step_breakpoints_set and
delete_single_step_breakpoints.
(init_wait_for_inferior): Remove references to removed globals.
(delete_thread_infrun_breakpoints): Delete the thread's
single-step breakpoints too.
(delete_just_stopped_threads_infrun_breakpoints): Don't delete
single-step breakpoints here.
(delete_stopped_threads_single_step_breakpoints): New function.
(adjust_pc_after_break): Adjust to use
thread_has_single_step_breakpoints_set.
(handle_inferior_event): Remove references to removed globals.
Use delete_stopped_threads_single_step_breakpoints.
(handle_signal_stop): Adjust to per-thread single-step
breakpoints. Swap test order to do cheaper tests first.
(switch_back_to_stepped_thread): Extend debug output. Remove
references to removed globals.
* record-full.c (record_full_wait_1): Adjust to per-thread
single-step breakpoints.
* thread.c (delete_single_step_breakpoints)
(thread_has_single_step_breakpoints_set)
(thread_has_single_step_breakpoint_here): New functions.
(clear_thread_inferior_resources): Also delete the thread's
single-step breakpoints.
A little refactoring to reduce duplicate code.
gdb/
2014-10-15 Pedro Alves <palves@redhat.com>
* thread.c (delete_thread_breakpoint): New function.
(delete_step_resume_breakpoint)
(delete_exception_resume_breakpoint): Use it.
(delete_at_next_stop): New function.
(clear_thread_inferior_resources): Use delete_at_next_stop.
There are no users of deprecated_{insert,remove}_raw_breakpoint left.
gdb/
2014-10-15 Pedro Alves <palves@redhat.com>
* breakpoint.c (regular_breakpoint_inserted_here_p): Inline ...
(breakpoint_inserted_here_p): ... here. Remove special case for
software single-step breakpoints.
(find_non_raw_software_breakpoint_inserted_here): Inline ...
(software_breakpoint_inserted_here_p): ... here. Remove special
case for software single-step breakpoints.
(bp_target_info_copy_insertion_state)
(deprecated_insert_raw_breakpoint)
(deprecated_remove_raw_breakpoint): Delete functions.
* breakpoint.h (deprecated_insert_raw_breakpoint)
(deprecated_remove_raw_breakpoint): Remove declarations.
This patch makes single-step breakpoints "real" breakpoints on the
global location list.
There are several benefits to this:
- It removes the currently limitation that only 2 single-step
breakpoints can be inserted. See an example here of a discussion
around a case that wants more than 2, possibly unbounded:
https://sourceware.org/ml/gdb-patches/2014-03/msg00663.html
- makes software single-step work on read-only code regions.
The logic to convert a software breakpoint to a hardware breakpoint
if the memory map says the breakpoint address is in read only memory
is in insert_bp_location. Because software single-step breakpoints
bypass all that go and straight to target_insert_breakpoint, we
can't software single-step over read only memory. This patch
removes that limitation, and adds a test that makes sure that works,
by forcing a code region to read-only with "mem LOW HIGH ro" and
then stepping through that.
- Fixes PR breakpoints/9649
This is an assertion failure in insert_single_step_breakpoint in
breakpoint.c, because we may leave stale single-step breakpoints
behind on error.
The tests for stepping through read-only regions exercise the root
cause of the bug, which is that we leave single-step breakpoints
behind if we fail to insert any single-step breakpoint. Deleting
the single-step breakpoints in resume_cleanups,
delete_just_stopped_threads_infrun_breakpoints, and
fetch_inferior_event fixes this. Without that, we'd no longer hit
the assertion, as that code is deleted, but we'd instead run into
errors/warnings trying to insert/remove the stale breakpoints on
next resume.
- Paves the way to have multiple threads software single-stepping at
the same time, leaving update_global_location_list to worry about
duplicate locations.
- Makes the moribund location machinery aware of software single-step
breakpoints, paving the way to enable software single-step on
non-stop, instead of forcing serialized displaced stepping for all
single steps.
- It's generaly cleaner.
We no longer have to play games with single-step breakpoints
inserted at the same address as regular breakpoints, like we
recently had to do for 7.8. See this discussion:
https://sourceware.org/ml/gdb-patches/2014-06/msg00052.html.
Tested on x86_64 Fedora 20, on top of my 'single-step breakpoints on
x86' series.
gdb/
2014-10-15 Pedro Alves <palves@redhat.com>
PR breakpoints/9649
* breakpoint.c (single_step_breakpoints, single_step_gdbarch):
Delete array globals.
(single_step_breakpoints): New global.
(breakpoint_xfer_memory): Remove special handling for single-step
breakpoints.
(update_breakpoints_after_exec): Delete bp_single_step
breakpoints.
(detach_breakpoints): Remove special handling for single-step
breakpoints.
(breakpoint_init_inferior): Delete bp_single_step breakpoints.
(bpstat_stop_status): Add comment.
(bpstat_what, bptype_string, print_one_breakpoint_location)
(adjust_breakpoint_address, init_bp_location): Handle
bp_single_step.
(new_single_step_breakpoint): New function.
(set_momentary_breakpoint, bkpt_remove_location): Remove special
handling for single-step breakpoints.
(insert_single_step_breakpoint, single_step_breakpoints_inserted)
(remove_single_step_breakpoints, cancel_single_step_breakpoints):
Rewrite.
(detach_single_step_breakpoints, find_single_step_breakpoint):
Delete functions.
(breakpoint_has_location_inserted_here): New function.
(single_step_breakpoint_inserted_here_p): Rewrite.
* breakpoint.h: Remove FIXME.
(enum bptype) <bp_single_step>: New enum value.
(insert_single_step_breakpoint): Update comment.
* infrun.c (resume_cleanups)
(delete_step_thread_step_resume_breakpoint): Remove single-step
breakpoints.
(fetch_inferior_event): Install a cleanup that removes infrun
breakpoints.
(switch_back_to_stepped_thread) <expect thread advanced also>:
Clear step-over info.
gdb/testsuite/
2014-10-15 Pedro Alves <palves@redhat.com>
PR breakpoints/9649
* gdb.base/breakpoint-in-ro-region.c (main): Add more instructions.
* gdb.base/breakpoint-in-ro-region.exp
(probe_target_hardware_step): New procedure.
(top level): Probe hardware stepping and hardware breakpoint
support. Test stepping through a read-only region, with both
"breakpoint auto-hw" on and off and both "always-inserted" on and
off.
This is a preparatory/cleanup patch that does two things:
- Renames 'delete_step_thread_step_resume_breakpoint'. The
"step_resume" part is misnomer these days, as the function deletes
other kinds of breakpoints, not just the step-resume breakpoint. A
following patch will want to make it delete yet another kind of
breakpoint, even.
- Splits out the logic of which threads get those breakpoints deleted
to a separate "for_each"-style function, so that the same following
patch may use it with a different callback.
Tested on x86_64 Fedora 20.
gdb/
2014-10-15 Pedro Alves <palves@redhat.com>
* infrun.c (delete_step_resume_breakpoint_callback): Delete.
(delete_thread_infrun_breakpoints): New function, with parts
salvaged from delete_step_resume_breakpoint_callback.
(delete_step_thread_step_resume_breakpoint): Delete.
(for_each_just_stopped_thread_callback_func): New typedef.
(for_each_just_stopped_thread): New function.
(delete_just_stopped_threads_infrun_breakpoints): New function.
(delete_step_thread_step_resume_breakpoint_cleanup): Rename to ...
(delete_just_stopped_threads_infrun_breakpoints_cleanup):
... this. Adjust.
(wait_for_inferior, fetch_inferior_event): Adjust to renames.
When GDB finds out the target triggered a watchpoint, and the target
has non-continuable watchpoints, GDB sets things up to step past the
instruction that triggered the watchpoint. This is just like stepping
past a breakpoint, but goes through a different mechanism - it resumes
only the thread that needs to step past the watchpoint, but also
switches a "infwait state" global, that has the effect that the next
target_wait only wait for events only from that thread.
This forcing of a ptid to pass to target_wait obviously becomes a
bottleneck if we ever support stepping past different watchpoints
simultaneously (in separate processes).
It's also unnecessary -- the target should only return events for
threads that have been resumed; if no other thread than the one we're
stepping past the watchpoint has been resumed, then those other
threads should not report events. If we couldn't assume that, then
stepping past regular breakpoints would be broken for not likewise
forcing a similar infwait_state.
So this patch eliminates infwait_state, and instead teaches keep_going
to mark step_over_info in a way that has the breakpoints module skip
inserting watchpoints (because we're stepping past one), like it skips
breakpoints when we're stepping past one.
Tested on:
- x86_64 Fedora 20 (continuable watchpoints)
- PPC64 Fedora 18 (non-steppable watchpoints)
gdb/
2014-10-15 Pedro Alves <palves@redhat.com>
* breakpoint.c (should_be_inserted): Don't insert watchpoints if
trying to step past a non-steppable watchpoint.
* gdbthread.h (struct thread_info) <stepping_over_watchpoint>: New
field.
* infrun.c (struct step_over_info): Add new field
'nonsteppable_watchpoint_p' and adjust comments.
(set_step_over_info): New 'nonsteppable_watchpoint_p' parameter.
Adjust.
(clear_step_over_info): Clear nonsteppable_watchpoint_p as well.
(stepping_past_nonsteppable_watchpoint): New function.
(step_over_info_valid_p): Also return true if stepping past a
nonsteppable watchpoint.
(proceed): Adjust call to set_step_over_info. Remove reference to
init_infwait_state.
(init_wait_for_inferior): Remove reference to init_infwait_state.
(waiton_ptid): Delete global.
(struct execution_control_state)
<stepped_after_stopped_by_watchpoint>: Delete field.
(wait_for_inferior, fetch_inferior_event): Always pass
minus_one_ptid to target_wait.
(init_thread_stepping_state): Clear 'stepping_over_watchpoint'
field.
(init_infwait_state): Delete function.
(handle_inferior_event): Remove infwait_state handling.
(handle_signal_stop) <watchpoints handling>: Adjust after
stepped_after_stopped_by_watchpoint removal. Don't remove
breakpoints here nor set infwait_state. Set the thread's
stepping_over_watchpoint flag, and call keep_going instead.
(keep_going): Handle stepping_over_watchpoint. Adjust
set_step_over_info calls.
* infrun.h (stepping_past_nonsteppable_watchpoint): Declare
function.
... instead of trap_expected.
Gets rid of one singlestep_breakpoints_inserted_p reference, and is
generally more to the point.
gdb/
2014-10-15 Pedro Alves <palves@redhat.com>
* infrun.c (step_over_info_valid_p): New function.
(resume): Use step_over_info_valid_p instead of checking the
threads's trap_expected flag.
Don't use debug_reg_state for both:
* "intent" - what we want the debug registers to look like
* "reality" - what/which were the contents of the DR registers when
the event triggered
Reserve it for the former only, like in the GNU/Linux port.
Otherwise the core x86 debug registers code can get confused if the
inferior itself changes the debug registers since GDB last set them.
This is also a requirement for being able to set watchpoints while the
target is running, if/when we get to it on Windows. See the big
comment in x86_dr_stopped_data_address.
Seems to me this may also fixes propagating watchpoints to all threads
-- continue_one_thread only calls win32_set_thread_context (what
copies the DR registers to the thread), if something already fetched
the thread's context before. Something else may be masking this
issue, I haven't checked.
Smoke tested by running gdbserver under Wine, connecting to it from
GNU/Linux, and checking that I could trigger a watchpoint as expected.
Joel tested it on x86-windows using AdaCore's testsuite.
gdb/gdbserver/
2014-10-15 Pedro Alves <palves@redhat.com>
PR server/17487
* win32-arm-low.c (arm_set_thread_context): Remove current_event
parameter.
(arm_set_thread_context): Delete.
(the_low_target): Adjust.
* win32-i386-low.c (debug_registers_changed)
(debug_registers_used): Delete.
(update_debug_registers_callback): New function.
(x86_dr_low_set_addr, x86_dr_low_set_control): Mark all threads as
needing to update their debug registers.
(win32_get_current_dr): New function.
(x86_dr_low_get_addr, x86_dr_low_get_control)
(x86_dr_low_get_status): Fetch the debug register from the thread
record's context.
(i386_initial_stuff): Adjust.
(i386_get_thread_context): Remove current_event parameter. Don't
clear debug_registers_changed nor copy DR values to
debug_reg_state.
(i386_set_thread_context): Delete.
(i386_prepare_to_resume): New function.
(i386_thread_added): Mark the thread as needing to update irs
debug registers.
(the_low_target): Remove i386_set_thread_context and install
i386_prepare_to_resume.
* win32-low.c (win32_get_thread_context): Adjust.
(win32_set_thread_context): Use SetThreadContext
directly.
(win32_prepare_to_resume): New function.
(win32_require_context): New function, factored out from ...
(thread_rec): ... this.
(continue_one_thread): Call win32_prepare_to_resume on each thread
we're about to continue.
(win32_resume): Call win32_prepare_to_resume on the event thread.
* win32-low.h (struct win32_thread_info)
<debug_registers_changed>: New field.
(struct win32_target_ops): Change prototype of set_thread_context,
delete set_thread_context and add prepare_to_resume.
(win32_require_context): New declaration.
gdb/ChangeLog:
* python/lib/gdb/__init__.py (packages): Add "printer".
* python/lib/gdb/command/bound_registers.py: Moved to ...
* python/lib/gdb/printer/bound_registers.py: ... here.
Add printer to global set of builtin printers. Rename printer from
"bound" to "mpx_bound128".
* python/lib/gdb/printing.py (_builtin_pretty_printers): New global,
registered as global "builtin" printer.
(add_builtin_pretty_printer): New function.
* data-directory/Makefile.in (PYTHON_FILE_LIST): Update, and add
gdb/printer/__init__.py.
On 32-bit S390 targets the longjmp target address "naturally" has the
most significant bit set. That bit indicates the addressing mode and
is not part of the address itself. Thus, in analogy with similar
cases (like when computing the caller PC in
insert_step_resume_breakpoint_at_caller), this change removes
non-address bits from the longjmp target address before using it as a
breakpoint address.
Note that there are two ways for determining the longjmp target
address: via a probe or via a gdbarch method. This change only
affects the probe method, because it is assumed that the address
returned by the gdbarch method is usable as-is.
This change was tested together with a patch that enables longjmp
probes in glibc for S/390:
https://sourceware.org/ml/libc-alpha/2014-10/msg00277.html
gdb/ChangeLog:
* gdb/infrun.c (process_event_stop_test): Apply
gdbarch_addr_bits_remove to longjmp resume address.
This file:
- Isn't used by GDBserver currently.
- Isn't included in the WHICH list in features/Makefile, so hasn't
been regenerated to pick the latest microblaze or generic fixes.
Just delete it.
gdb/
2014-10-15 Pedro Alves <palves@redhat.com>
* regformats/microblaze.dat: Delete file.
The Microblaze PC register is called "rpc", not "pc", as can be seen
in microblaze-core.xml. Fix this, so GDBserver can find the register in
the regcache.
gdb/
2014-10-15 Ajit Agarwal <ajitkum@xilinx.com>
* features/Makefile (microblaze-expedite): Replace pc with rpc.
* regformats/microblaze-with-stack-protect.dat: Regenerate.
Before this, a copy constructor declared as in the following snippet was
not being treated as a copy constructor.
class A
{
public:
A (A &); // OK.
A (const A &); // Not being treated as a copy constructor because of the
// 'const' qualifier.
};
gdb/ChangeLog:
PR c++/13403
PR c++/15154
* gnu-v3-abi.c (gnuv3_pass_by_reference): Lookup copy constructors
with qualified args.
Test gdb.python/py-parameter.exp expects output "$srcdir/$subdir:\$cdir:\$cwd",
but proc gdb_reinitialize_dir doesn't set $srcdir/$subdir in search
directories on remote host because it doesn't exist on remote host.
proc gdb_reinitialize_dir { subdir } {
global gdb_prompt
if [is_remote host] {
return ""
}
It causes the fail below:
(gdb) python print (gdb.parameter ('directories'))^M
/tmp/gdb:$cdir:$cwd^M
(gdb) FAIL: gdb.python/py-parameter.exp: python print (gdb.parameter ('directories'))
This patch is to fix this fail by not matching $srcdir/$subdir on remote host.
gdb/testsuite:
2014-10-15 Yao Qi <yao@codesourcery.com>
* gdb.python/py-parameter.exp: Don't match $srcdir/$subdir on
remote host.
I see the following fails in the remote host testing we do for mingw32
hosted GDB,
python print (symtab[1][0].symtab)^M
python.c^M
(gdb) FAIL: gdb.python/python.exp: Test decode_line current locationn filename
python print (symtab[1][0].symtab)^M
python.c^M
(gdb) FAIL: gdb.python/python.exp: Test decode_line python.c:26 filename
The test cases doesn't consider remote host and assumes that directory
on build also exists on host. In this patch, we only match file base
name if host is remote, otherwise, match file with dir name.
gdb/testsuite:
2014-10-15 Yao Qi <yao@codesourcery.com>
* gdb.python/py-symbol.exp: Match file base name if host is
remote, otherwise match file name with dir name.
* gdb.python/py-symtab.exp: Likewise.
* gdb.python/python.exp: Likewise.
This patch is to clean up various gdb.python/*.exp tests, such as
removing trailing ".*" from the pattern and fix one typo I find during
reading the code.
gdb/testsuite:
2014-10-15 Yao Qi <yao@codesourcery.com>
* gdb.python/python.exp: Remove trailing ".*". Fix typo
locationn.
* gdb.python/py-symbol.exp: Remove trailing ".*" in the
pattern.
* gdb.python/py-symtab.exp: Likewise.
* ldlex.l (INPUTLIST): New start condition.
(comment pattern, ",", "(", ")", "AS_NEEDED")
({FILENAMECHAR1}{FILENAMECHAR}*, "-l"{FILENAMECHAR}+)
(quoted string pattern, whitespace pattern): Add INPUTLIST to
valid start conditions.
(<INPUTLIST>"="{FILENAMECHAR1}{FILENAMECHAR}*): New NAME rule.
(ldlex_inputlist): New start-condition-setter function.
* ldgram.y (input_list1): Rename from input_list. All recursive
use changed.
(input_list): New wrapper rule for input_list1, setting
INPUTLIST lexer state for the duration of parsing input_list1.
All this to say INPUT(=/path/to/file) and not be forced to use
INPUT("=/path/to/file") whenever there's a need to force a sysroot-
prefix. Still, IMHO it seems better to make use of a previously
invalid syntax and not only change the meaning of quoted =-prefixed
paths (though arguably that's not very useful before this patchset).
This got a little bit hairier than I'd expected: I had to add a new
lexer state (aka. start condition) to avoid a first "=" being lexed as
the token "=", despite that not making sense in constructs expecting
file-names in the first place. (The grammar doesn't allow for
expressions in any part of those lists.) I guess I *could* have made
it work using that token anyway, but I didn't like the idea that you
would be able to separate the "=" from the rest of the file-name with
whitespace.
* ldlang.c (lang_add_input_file): If the first character in the
filename is '=', prepend the sysroot and force the context of that
input file to non-sysroot.
The "input_flags.sysrooted = 0" thing described in the comment is
covered by the testsuite part ("root-anchored =-prefixed script
inside"), but only observable for --with-sysroot configurations.
* ld-scripts/sysroot-prefix.exp, ld-scripts/sysroot-prefix-x.s,
ld-scripts/sysroot-prefix-y.s: New files.
N.B: full coverage is only possible with complementary use of
--with-sysroot when configuring.
* ld.texinfo (input files in linker scripts): When mentioning
behavior of first character "/" on scripts within sysroot, also
mention that effect can be forced by prefixing with "=" and
refer to SEARCH_DIR.
If src contains n or more bytes, strncat() writes n+1 bytes to dest
(n from src plus the terminating null byte). Therefore, the size of
dest must be at least strlen(dest)+n+1.
* config/tc-tic4x.c (md_assemble): Correct strncat size.