If !PARSE_CONDITION_AND_THREAD, then ARG is just the location, nothing
else. The fact that the describing comment of create_breakpoint
doesn't mention this just looks like an oversight of when extra_string
was added. "parse_condition_and_thread" has been a misnomer ever
since extra_string was added -- better rename it avoid more confusion.
This makes it "parse_arg", as that'll remain stable even if/when more
explicit parameters are added.
gdb/
2013-04-08 Pedro Alves <palves@redhat.com>
Keith Seitz <keiths@redhat.com>
* breakpoint.c (create_breakpoint): Rename
"parse_condition_and_thread" parameter to "parse_arg". Update
describing comment. If !PARSE_ARG, then error out if ARG is not
the empty string after extracting the location.
* breakpoint.h (create_breakpoint): Rename
"parse_condition_and_thread" parameter to "parse_arg".
gdb/testsuite/
2013-04-08 Pedro Alves <palves@redhat.com>
* gdb.mi/mi-break.exp (test_error): Add tests with garbage after
the location.
* remote.c (remote_trace_find): Change type of parameters 'addr1'
and 'addr2' to CORE_ADDR.
* target.c (update_current_target): Update.
* target.h (struct target_ops) <to_trace_find>: Change parameter
type to CORE_ADDR.
* tracepoint.c (tfind_1): Change type of parameters 'addr1' and
'addr2' to CORE_ADDR.
(tfile_trace_find): Likewise.
(tfile_get_traceframe_address): Change return type to CORE_ADDR.
Change local variable 'addr' to type CORE_ADDR.
* tracepoint.h (tfind_1): Update declaration.
Make current with UA2011 specification.
Add an F_PREFERRED opcode flag that indicates a preferred alias
when multiple aliases for the same opcode exists.
For 'lzd':
Add 'lzcnt' as primary instruction, and make 'lzd' an alias.
Add 'ldtw', 'ldtwa', 'sttw', 'sttwa':
The modern opcode for for 'ldd', 'ldda', 'std', and 'stda' on
integer registers. Mark the latter now as aliases.
For 'flush':
Support "[address]" syntax as well as plain "address".
Rework 'mov' aliases for 'wr':
Eliminate bogus three operand moves, and encode the
instructions properly for the "mov REG, %ASR" cases,
specifically we should encode the register in rs2 not rs1 as
per The SPARC V8 Architecture Manual.
Add missing cbcond aliases:
c{w,x}bz, c{w,x}blu, c{w,x}bnz, c{w,x}bgeu
Add 'd' suffix VIS logical ops:
The primary opcode for 'fzero' is now 'fzerod' (compare with
'fzeros'), for example. And thus 'fzero' is now an alias.
Add modern opcodes for condition code setting edge instructions:
They are now edgeN{,l}cc instead of plain edgeN{,l}.
Add modern opcodes for VIS comparisons:
All VIS comparisons now start with prefix "fp", retain the
older variants as aliases.
The signed variants for equal and not-equal have "u" aliases
to show that these comparisons are equally suited for unsigned
compares.
Update existing test cases as needed, and add several new ones.
include/opcode/
* sparc.h (F_PREFERRED): Define.
(F_PREF_ALIAS): Define.
opcodes/
* sparc-dis.c (compare_opcodes): When encountering multiple aliases
of an opcode, prefer the one with F_PREFERRED set.
* sparc-opc.c (sparc_opcodes): Add ldtw, ldtwa, sttw, sttwa,
lzcnt, flush with '[address]' syntax, and missing cbcond pseudo
ops. Make 64-bit VIS logical ops have "d" suffix in their names,
mark existing mnenomics as aliases. Add "cc" suffix to edge
instructions generating condition codes, mark existing mnenomics
as aliases. Add "fp" prefix to VIS compare instructions, mark
existing mnenomics as aliases.
gas/testsuite/
* gas/sparc/cbcond.s: Add tests for new opcode aliases.
* gas/sparc/cbcond.d: Updated.
* gas/sparc/hpcvis3.s: Add tests for new opcode aliases.
* gas/sparc/hpcvis3.d: Updated.
* gas/sparc/v8-movwr-imm.d: Fix expected disassembly.
* gas/sparc/edge.s: New test.
* gas/sparc/edge.d: Expected disassembly.
* gas/sparc/flush.s: New test.
* gas/sparc/flush.d: Expected disassembly.
* gas/sparc/ldd_std.s: New test.
* gas/sparc/ldd_std.d: Expected disassembly.
* gas/sparc/ldtw_sttw.s: New test.
* gas/sparc/ldtw_sttw.d: Expected disassembly.
* gas/sparc/sparc.exp: Run new tests.
* gdb.texinfo (gdbserver man): Rename tty to comm. Swap --attach
parameters order. Remove "On some targets" for --attach. Document the
--multi parameter and extended-remote command. Document all the
options.
Fix compatibility with Linux kernel 3.8.3.
* linux-tdep.c (linux_find_memory_regions_full): Move variable number
to more inner block. Remove parsing of NUMBER from outer block.
Parse NUMBER only if KEYWORD has been identified.
If a tracepoint's actions list includes a while-stepping action, and
then the actions are changed to a list without any while-stepping
action, the tracepoint's step_count will be left with a stale value.
For example:
(gdb) trace subr
Tracepoint 1 at 0x4004d9: file ../../../src/gdb/testsuite//actions-changed.c, line 31.
(gdb) actions
Enter actions for tracepoint 1, one per line.
End with a line saying just "end".
>collect $reg
>end
(gdb) set debug remote 1
(gdb) tstart
Sending packet: $QTinit#59...Packet received: OK
Sending packet: $QTDP:1:00000000004004d9:E:0:0-#a3...Packet received: OK
Sending packet: $QTDP👎00000000004004d9:R03FFFFFFFFFFFFFFFFFF#2b...Packet received: OK
(gdb) tstop
Sending packet: $QTStop#4b...Packet received: OK
Sending packet: $QTNotes:#e8...Packet received: OK
(gdb) actions
Enter actions for tracepoint 1, one per line.
End with a line saying just "end".
>collect $reg
>while-stepping 1
>collect $reg
>end
>end
(gdb) tstart
Sending packet: $QTinit#59...Packet received: OK
Sending packet: $QTDP:1:00000000004004d9:E:1:0-#a4...Packet received: OK
Sending packet: $QTDP👎00000000004004d9:R03FFFFFFFFFFFFFFFFFF-#58...Packet received: OK
Sending packet: $QTDP👎00000000004004d9:SR03FFFFFFFFFFFFFFFFFF#7e...Packet received: OK
(gdb) tstop
Sending packet: $QTStop#4b...Packet received: OK
Sending packet: $QTNotes:#e8...Packet received: OK
(gdb) actions
Enter actions for tracepoint 1, one per line.
End with a line saying just "end".
>collect $regs
>end
(gdb) tstart
Sending packet: $QTinit#59...Packet received: OK
Sending packet: $QTDP:1:00000000004004d9:E:1:0-#a4...Packet received: OK
Sending packet: $QTDP👎00000000004004d9:R03FFFFFFFFFFFFFFFFFF#2b...Packet received: OK
The last "$QTDP:1:00000000004004d9:E:1:0-#a4" should be "$QTDP:1:00000000004004d9:E:0:0-#a3".
In pseudo-diff:
-$QTDP:1:00000000004004d9:E:1:0-#a4
+$QTDP:1:00000000004004d9:E:0:0-#a3
A related issue is that the "commands" command actually supports
setting commands to a range of breakpoints/tracepoints at once. But,
hacking "maint info breakpoints" to print t->step_count, reveals:
(gdb) trace main
Tracepoint 5 at 0x45a2ab: file ../../src/gdb/gdb.c, line 29.
(gdb) trace main
Note: breakpoint 5 also set at pc 0x45a2ab.
Tracepoint 6 at 0x45a2ab: file ../../src/gdb/gdb.c, line 29.
(gdb) commands 5-6
Type commands for breakpoint(s) 5-6, one per line.
End with a line saying just "end".
> while-stepping 5
>end
> end
(gdb) maint info breakpoints 5
Num Type Disp Enb Address What
5 tracepoint keep y 0x000000000045a2ab in main at ../../src/gdb/gdb.c:29 inf 1
step_count=5
^^^^^^^^^^^^
while-stepping 5
end
not installed on target
(gdb) maint info breakpoints 6
Num Type Disp Enb Address What
6 tracepoint keep y 0x000000000045a2ab in main at ../../src/gdb/gdb.c:29 inf 1
step_count=0
^^^^^^^^^^^^
while-stepping 5
end
not installed on target
(gdb)
that tracepoint 6 doesn't end up with the correct step_count.
The issue is that here:
static void
do_map_commands_command (struct breakpoint *b, void *data)
{
struct commands_info *info = data;
if (info->cmd == NULL)
{
struct command_line *l;
if (info->control != NULL)
l = copy_command_lines (info->control->body_list[0]);
else
{
struct cleanup *old_chain;
char *str;
str = xstrprintf (_("Type commands for breakpoint(s) "
"%s, one per line."),
info->arg);
old_chain = make_cleanup (xfree, str);
l = read_command_lines (str,
info->from_tty, 1,
(is_tracepoint (b)
? check_tracepoint_command : 0),
b);
do_cleanups (old_chain);
}
info->cmd = alloc_counted_command_line (l);
}
validate_actionline is never called for tracepoints other than the
first (the copy_command_lines path). Right below, we have:
/* If a breakpoint was on the list more than once, we don't need to
do anything. */
if (b->commands != info->cmd)
{
validate_commands_for_breakpoint (b, info->cmd->commands);
incref_counted_command_line (info->cmd);
decref_counted_command_line (&b->commands);
b->commands = info->cmd;
observer_notify_breakpoint_modified (b);
}
And validate_commands_for_breakpoint looks like the right place to put
a call; if we reset step_count there too, we have a nice central fix
for the first issue as well, because trace_actions_command calls
breakpoint_set_commands that also calls
validate_commands_for_breakpoint.
We end up calling validate_actionline twice for the first tracepoint,
since read_command_lines calls it too, through
check_tracepoint_command, but that should be harmless.
2013-04-04 Pedro Alves <palves@redhat.com>
Hui Zhu <hui@codesourcery.com>
* breakpoint.c (validate_commands_for_breakpoint): If validating a
tracepoint, reset its STEP_COUNT and call validate_actionline.
2013-04-04 Stan Shebs <stan@codesourcery.com>
Pedro Alves <palves@redhat.com>
* gdb.trace/Makefile.in (PROGS): Add actions-changed.
* gdb.trace/actions-changed.c: New file.
* gdb.trace/actions-changed.exp: New file.
* lib/trace-support.exp (gdb_trace_setactions): Rename to ...
(gdb_trace_setactions_command): ... this. Add "actions_command"
parameter, and handle it.
(gdb_trace_setactions, gdb_trace_setcommands): New procedures.
read_die_and_siblings.
(read_die_and_siblings): New function.
(read_cutu_die_from_dwo): Dump die if requested.
(read_die_and_children): Call read_full_die_1 and
read_die_and_siblings_1.
(read_full_die): Dump die if requested.
* dwarf2read.c (read_comp_units_from_section): Add debugging printf.
Rename member name to dwo_name. All uses updated.
(hash_dwo_file): Include comp_dir in computation.
(eq_dwo_file): Ditto.
(lookup_dwo_file_slot): New arg comp_dir. All callers updated.
(create_dwo_in_dwp, lookup_dwo_in_dwp, open_and_init_dwo_file): Ditto.
Tom Tromey
Jan Beulich
Pedro Alves
Aleksandar Ristovski
Ramana Radhakrishnan
Alan Modra
gdbadmin
Yao Qi
Jan Kratochvil
David S. Miller
Eli Zaretskii
Doug Evans
Nick Clifton
Sandra Loosemore
Ian Lance Taylor
DJ Delorie