Since _GLOBAL_OFFSET_TABLE_ may be referenced implicitly on x86,
checking ref_regular_nonweak leaves the unused _GLOBAL_OFFSET_TABLE_
in output. This patch checks explicit GOT references instead.
ld-i386/discarded1.s and ld-x86-64/discarded1.s are updated to avoid
linker optimization which removes GOT references.
bfd/
PR ld/22782
* elf32-i386.c (elf_i386_check_relocs): Set got_referenced if
_GLOBAL_OFFSET_TABLE_ is referenced or GOT is needed to resolve
undefined weak symbol to 0.
* elf64-x86-64.c (elf_x86_64_check_relocs): Set got_referenced
if _GLOBAL_OFFSET_TABLE_ is referenced.
* elfxx-x86.c (_bfd_x86_elf_size_dynamic_sections): Check
got_referenced instead of ref_regular_nonweak. Remove the
unused _GLOBAL_OFFSET_TABLE_ from symbol table.
* elfxx-x86.h (elf_x86_link_hash_table): Add got_referenced.
ld/
PR ld/22782
* testsuite/ld-i386/discarded1.s: Replace mov with div.
* testsuite/ld-x86-64/discarded1.s: Likewise.
* testsuite/ld-i386/i386.exp: Run pr22782.
* testsuite/ld-i386/load1-nacl.d: Updated for removing
_GLOBAL_OFFSET_TABLE_ from output.
* testsuite/ld-i386/load1.d: Likewise.
* testsuite/ld-x86-64/load1a-nacl.d: Likewise.
* testsuite/ld-x86-64/load1a.d: Likewise.
* testsuite/ld-x86-64/load1b-nacl.d: Likewise.
* testsuite/ld-x86-64/load1b.d: Likewise.
* testsuite/ld-i386/pr22782.d: New file.
* testsuite/ld-i386/pr22782.s: Likewise.
* testsuite/ld-x86-64/pr22782.s: Likewise.
* testsuite/ld-x86-64/pr22782a.d: Likewise.
* testsuite/ld-x86-64/pr22782b.d: Likewise.
* testsuite/ld-x86-64/x86-64.exp: Run pr22782a and pr22782b.
Add $AFLAGS_PIC flags for PIC assembly to a number of tests missing them
and remove `tic6x-*-*' XFAIL annotations from them, previously added to
paper over:
.../ld-new: warning: generating a shared library containing non-PID code
error messages produced due to `-mpic -mpid=near' GAS options having not
been used. Such errors now do not happen anymore, removing:
XFAIL: Build shared library for pr14170
XFAIL: PR ld/21703 shared
XFAIL: Build shared library for broken linker script test
XFAIL: Build pr17068.so
XFAIL: -Bsymbolic-functions
XFAIL: Build pr20995.so
XFAIL: Build pr22374 shared library
with `tic6x-elf' and `tic6x-uclinux' targets. These tests now pass all
except for:
FAIL: PR ld/21703 shared
which is now due to a different reason, as follows:
extra regexps in .../ld/testsuite/ld-elf/pr21703-shared.sd starting with "^Symbol table '\.dynsym' contains [0-9]+ entries:$"
EOF from dump.out
FAIL: PR ld/21703 shared
The addition of $AFLAGS_PIC requires the affected test cases to use the
`list' command rather than `{}' characters to create a list, to avoid
the quoting property `{}' also have in TCL. Consequently the change is
slightly more extensive than it could otherwise be.
ld/
* testsuite/ld-elf/shared.exp: Add $AFLAGS_PIC throughout to PIC
assembly builds where missing and remove `tic6x-*-*' XFAIL
markings accordingly.
Correct LD test suite failures with VR4100, VR4300 and VR5000 bare metal
MIPS/ELF targets which do not default to linking with shared libraries,
which leads to link failures like:
.../ld/ld-new: cannot find -lcomm-data
FAIL: Common symbol override test
or:
.../ld/ld-new: attempted static link of dynamic object `tmpdir/pr14170.so'
FAIL: PR ld/14170
removing:
FAIL: Build pr22471b.so
FAIL: Build pr22471
FAIL: Build pr22649-2b.so
FAIL: Build pr22649-2d.so
FAIL: Build pr22150
FAIL: PR ld/14170
FAIL: --gc-sections with __gxx_personality
test failures.
ld/
* testsuite/ld-elf/comm-data.exp: Pass `-call_shared' to links
involving a shared library for `mips*vr4100*-*-elf*',
`mips*vr4300*-*-elf*' and `mips*vr5000*-*-elf*' targets.
* testsuite/ld-elf/provide-hidden.exp: Likewise.
* testsuite/ld-elf/shared.exp: Likewise.
* testsuite/ld-gc/gc.exp: Likewise.
* testsuite/ld-mips-elf/comm-data.exp: Likewise.
Move those ELF shared library tests that are in ld-elf/elf.exp over to
ld-elf/shared.exp, to keep them all together and make the maintenance of
extra flags needed with some targets and shared library builds easier,
and also removing the need for the large:
if { [check_shared_lib_support] } then {
[...]
}
conditional block and consequently reducing indentation, which always
helps with TCL code. No functional change, except for the order of
individual test case execution which has changed accordingly, i.e. the
test results are shuffled.
ld/
* testsuite/ld-elf/elf.exp: Move shared library tests over to...
* testsuite/ld-elf/shared.exp: ... here.
We really need to check for a dynamic def, not only a ref.
See added testcase.
bfd/
* elflink.c (bfd_elf_define_start_stop): Fix check of
def_dynamic.
ld/
* testsuite/ld-elf/pr21964-5.c: New test.
* testsuite/ld-elf/shared.exp: Run it.
Define __start/__stop symbols if they are referenced by shared objects,
not if they are also defined in shared objects.
bfd/
PR ld/21964
* elflink.c (bfd_elf_define_start_stop): Check if __start and
__stop symbols are referenced by shared objects.
ld/
PR ld/21964
* testsuite/ld-elf/pr21964-4.c: New file.
* testsuite/ld-elf/shared.exp: Run pr21964-4 test on Linux.
Fix commit d664fd41e1 ("Ignore dynamic references on forced local
symbols") and use alternative test actions and match patterns to
correctly handle messages like:
.../ld/ld-new: Removing unused section '.reginfo' in file 'tmpdir/pr22649-2b.o'
or:
.../ld/ld-new: Removing unused section '.MIPS.options' in file 'tmpdir/pr22649-2b.o'
produced by LD on MIPS targets, removing:
FAIL: Build pr22649-2c.so
FAIL: Build pr22649-2d.so
test suite failures and tightening checks made with `pr22649-2a.so' and
`pr22649-2b.so' test cases.
Keep the original empty action with `pr22649-2c.so' and `pr22649-2d.so'
links and MIPS/ELF targets though, because for them the linker does not
garbage-collect the `.reginfo' section. This is because the section has
its flags set differently by code in GAS in `md_begin':
if (strncmp (TARGET_OS, "elf", 3) != 0)
flags |= SEC_ALLOC | SEC_LOAD;
and consequently BFD linker code in `_bfd_elf_gc_mark_extra_sections':
else if (((isec->flags & SEC_DEBUGGING) != 0
|| (isec->flags & (SEC_ALLOC | SEC_LOAD | SEC_RELOC)) == 0)
&& elf_next_in_group (isec) == NULL)
isec->gc_mark = 1;
marks these sections to be kept due to their SEC_ALLOC, SEC_LOAD and
SEC_RELOC flags all being zero (`.reginfo' sections never have
relocations attached).
ld/
PR ld/22649
* testsuite/ld-elf/pr22649-2ab-mips.msg: New stderr output.
* testsuite/ld-elf/pr22649-2cd-mips.msg: New stderr output.
* testsuite/ld-elf/shared.exp: Use the new outputs with
`mips*-*-*' targets.
Update `readelf' symbol table dump match patterns to handle SHN_MIPS_DATA
and SHN_MIPS_TEXT special section indexes produced by the IRIX ELF format
variation used with a number of MIPS targets and printed by `readelf' as
PRC[0xff02] and PRC[0xff01] respectively, correcting LD test suite
failures:
extra regexps in .../ld/testsuite/ld-elf/comm-data1.sd starting with "^ +[0-9]+: +[0-9a-f]+ +0 +OBJECT +GLOBAL +DEFAULT +[0-9]+ +foo$"
EOF from dump.out
FAIL: Common symbol override test (auxiliary shared object build)
extra regexps in .../ld/testsuite/ld-elf/pr21703-shared.sd starting with "^ +[0-9]+: +[0-9a-f]+ +4 +FUNC +GLOBAL +DEFAULT +[0-9] +foo@FOO$"
EOF from dump.out
FAIL: PR ld/21703 shared
extra regexps in .../ld/testsuite/ld-elf/comm-data1.sd starting with "^ +[0-9]+: +[0-9a-f]+ +0 +OBJECT +GLOBAL +DEFAULT +[0-9]+ +foo$"
EOF from dump.out
FAIL: MIPS o32/copyreloc common symbol override test (auxiliary shared object build)
extra regexps in .../ld/testsuite/ld-elf/comm-data1.sd starting with "^ +[0-9]+: +[0-9a-f]+ +0 +OBJECT +GLOBAL +DEFAULT +[0-9]+ +foo$"
EOF from dump.out
FAIL: MIPS o32/nocopyreloc common symbol override test (auxiliary shared object build)
observed due to file contents like:
7: 5ffe02e8 0 OBJECT GLOBAL DEFAULT PRC[0xff02] foo
shown by `readelf -s' vs:
+[0-9]+: +[0-9a-f]+ +0 +OBJECT +GLOBAL +DEFAULT +[0-9]+ +foo
pattern expected, triggered by widening testing to these targets by commit
05a5feafdd ("Rewrite check_shared_lib_support").
ld/
* testsuite/ld-elf/comm-data1.sd: Alternatively accept
`PRC[0xff02]' in place of a regular section index.
* testsuite/ld-elf/pr21703-shared.sd: Likewise `PRC[0xff01]'.
bfd/
* elflink.c (bfd_elf_define_start_stop): Make __start and __stop
symbols dynamic.
ld/
* testsuite/ld-elf/pr21964-3a.c: New file.
* testsuite/ld-elf/pr21964-3c.c: New file.
* testsuite/ld-elf/shared.exp: Run new __start/__stop testcase.
On the SPARC architecture, you need to pass a special flag to GNU as
when you're assembling PIC/PIE code or else you get a wrong relocation
for the GOT symbol.
ld/
* testsuite/ld-elf/shared.exp (AFLAGS_PIC): Define on SPARC.
(pr22269-1): Pass AFLAGS_PIC to the assembler.
The .dc.a directive has wrong size (32 bits) on SPARC 64-bit because
the assembler sets the correct BFD architecture only at the very end
of the processing and it's too late for the directive. It's fixed by
defining TARGET_MACH and making it return a sensible default value.
gas/
* config/tc-sparc.h (sparc_mach): Declare.
(TARGET_MACH): Define to above.
* config/tc-sparc.c (sparc_mach): New function.
(sparc_md_end): Minor tweak.
ld/
* testsuite/ld-elf/pr22450.d: Remove reference to SPARC64.
Update the ld-mips-elf/comm-data.exp test script to correctly select
emulations for targets using non-traditional MIPS emulation and also
correctly select ABIs for targets that do not support all of them, and
finally use the default endianness selection to benefit targets which
support only one, complementing commit 05a5feafdd ("Rewrite
check_shared_lib_support") and removing numerous test failures such as:
FAIL: MIPS o32/copyreloc common symbol override test (auxiliary shared object build)
FAIL: MIPS o32/copyreloc common symbol override test
FAIL: MIPS o32/nocopyreloc common symbol override test (auxiliary shared objectbuild)
FAIL: MIPS o32/nocopyreloc common symbol override test
FAIL: MIPS n32/copyreloc common symbol override test (auxiliary shared object build)
FAIL: MIPS n32/copyreloc common symbol override test
FAIL: MIPS n32/nocopyreloc common symbol override test (auxiliary shared objectbuild)
FAIL: MIPS n32/nocopyreloc common symbol override test
due to:
.../ld/ld-new: unrecognised emulation mode: elf32btsmip
Supported emulations: elf64btsmip elf64ltsmip
or:
.../ld/ld-new: unrecognised emulation mode: elf32btsmip
Supported emulations: elf32ebmip
or:
.../ld/ld-new: unrecognised emulation mode: elf32btsmip
Supported emulations: elf32l4300
etc., and:
ERROR: -n32 -march=mips3 -EB -call_shared .../ld/testsuite/ld-mips-elf/../ld-elf/comm-data1.s: assembly failed
UNRESOLVED: MIPS n32/copyreloc common symbol override test (auxiliary shared object build)
ERROR: -n32 -march=mips3 -EB -call_nonpic .../ld/testsuite/ld-mips-elf/../ld-elf/comm-data2.s: assembly failed
UNRESOLVED: MIPS n32/copyreloc common symbol override test
ERROR: -n32 -march=mips3 -EB -call_shared .../ld/testsuite/ld-mips-elf/../ld-elf/comm-data1.s: assembly failed
UNRESOLVED: MIPS n32/nocopyreloc common symbol override test (auxiliary shared object build)
ERROR: -n32 -march=mips3 -EB -call_nonpic .../ld/testsuite/ld-mips-elf/../ld-elf/comm-data2.s: assembly failed
UNRESOLVED: MIPS n32/nocopyreloc common symbol override test
due to:
Assembler messages:
Fatal error: selected target format 'elf32-nbigmips' unknown
and:
ERROR: -64 -march=mips3 -EB -call_shared .../ld/testsuite/ld-mips-elf/../ld-elf/comm-data1.s: assembly failed
UNRESOLVED: MIPS n64/copyreloc common symbol override test (auxiliary shared object build)
ERROR: -64 -march=mips3 -EB --defsym ELF64=1 -call_nonpic .../ld/testsuite/ld-mips-elf/../ld-elf/comm-data2.s:assembly failed
UNRESOLVED: MIPS n64/copyreloc common symbol override test
ERROR: -64 -march=mips3 -EB -call_shared .../ld/testsuite/ld-mips-elf/../ld-elf/comm-data1.s: assembly failed
UNRESOLVED: MIPS n64/nocopyreloc common symbol override test (auxiliary shared object build)
ERROR: -64 -march=mips3 -EB --defsym ELF64=1 -call_nonpic .../ld/testsuite/ld-mips-elf/../ld-elf/comm-data2.s:assembly failed
UNRESOLVED: MIPS n64/nocopyreloc common symbol override test
due to:
Assembler messages:
Fatal error: no compiled in support for 64 bit object file format
ld/
* testsuite/ld-mips-elf/comm-data.exp: Correct support for
targets using non-traditional MIPS emulation or having a limited
selection of ABIs available. Don't force big endianness, use
defaults.
Skip static executable tests if static executable is unsupported.
Tested on Linux/x86 without libc.a.
PR ld/22732
* testsuite/config/default.exp (STATIC_LDFLAGS): New. Set to
"-static" if target compiler supports it.
* testsuite/ld-bootstrap/bootstrap.exp: Skip static executable
tests if target compiler doesn't support it.
* testsuite/ld-ifunc/ifunc.exp: Likewise.
* testsuite/lib/ld-lib.exp (run_ld_link_exec_tests): Likewise.
(run_cc_link_tests): Likewise.
Since dummy.o must be placed before
-Wl,--whole-archive tmpdir/pr22751.a -Wl,--no-whole-archive
to trigger the bug, this patch adds an optional trailing ld options to
run_ld_link_exec_tests.
PR ld/22751
* testsuite/config/default.exp (INT128_CFLAGS): New.
* testsuite/ld-plugin/lto.exp (INT128_CFLAGS): New.
Run ld/22751 tests.
* testsuite/ld-plugin/pr22751.c: New file.
* testsuite/lib/ld-lib.exp (run_ld_link_exec_tests): Add
ld trailing options.
There are actually 2 different bugs:
1. TLS transition is broken in PIE mode.
2. TLS is broken in PIC/PIE mode when the __tls_get_addr symbol
is versioned (as is the case on Linux and Solaris at least).
The 1st bug is fixed by reverting the problematic change for now
(note that the associated test doesn't pass on SPARC because of another
issue so there is no formal regression in the testsuite). The 2nd bug
is fixed by changing the call to _bfd_generic_link_add_one_symbol
on __tls_get_addr into a mere lookup in _bfd_sparc_elf_check_relocs.
bfd/
* elfxx-sparc.c (_bfd_sparc_elf_check_relocs) <R_SPARC_TLS_GD_CALL>:
Do a mere lookup of the __tls_get_addr symbol instead of adding it.
Revert
2017-10-19 H.J. Lu <hongjiu.lu@intel.com>
PR ld/22263
* elfxx-sparc.c (sparc_elf_tls_transition): Replace
bfd_link_pic with !bfd_link_executable, !bfd_link_pic with
bfd_link_executable for TLS check.
(_bfd_sparc_elf_check_relocs): Likewise.
(allocate_dynrelocs): Likewise.
(_bfd_sparc_elf_relocate_section): Likewise.
ld/
* testsuite/ld-sparc/sparc.exp (32-bit: Helper shared library):
Link with a version script.
(32-bit: TLS -fpie): New test.
(64-bit: Helper shared library): Link with a version script.
(64-bit: TLS -fpie): New test.
(64-bit: GOTDATA relocations): Pass -Av9 to the assembler.
* testsuite/ld-sparc/tlslib.ver: New file.
* testsuite/ld-sparc/tlspie32.dd: Likewise.
* testsuite/ld-sparc/tlspie32.s: Likewise.
* testsuite/ld-sparc/tlspie64.dd: Likewise.
* testsuite/ld-sparc/tlspie64.s: Likewise.
* testsuite/ld-sparc/tlssunbin32.dd: Adjust for versioned symbol.
* testsuite/ld-sparc/tlssunbin32.rd: Likewise.
* testsuite/ld-sparc/tlssunbin32.sd: Likewise.
* testsuite/ld-sparc/tlssunbin64.dd: Likewise.
* testsuite/ld-sparc/tlssunbin64.rd: Likewise.
* testsuite/ld-sparc/tlssunbin64.sd: Likewise.
We need to check the versioned __tls_get_addr symbol when looking up
"__tls_get_addr".
bfd/
PR ld/22721
* elfxx-x86.c (_bfd_x86_elf_link_check_relocs): Check the
versioned __tls_get_addr symbol.
ld/
PR ld/22721
* testsuite/ld-plugin/lto.exp: Run PR ld/22721 tests.
* testsuite/ld-plugin/pr22721.t: New file.
* testsuite/ld-plugin/pr22721a.s: Likewise.
* testsuite/ld-plugin/pr22721b.c: Likewise.
Also xfail ld-elf/group1.d for Solaris since _GLOBAL_OFFSET_TABLE_ is
always generated for Solaris as a global symbol after
.*: 0+1000 +0 +(NOTYPE|OBJECT) +WEAK +DEFAULT +. foo
instead of appending "#..." which will weaken the test.
* testsuite/ld-elf/group1.d: Also xfail Solaris.
Update ld-elf/linkinfo1[ab].d to accommodate slightly different PLT/GOT
order/layout for Solaris/x86 targets.
* testsuite/ld-elf/linkinfo1a.d: Updated for slightly different
PLT/GOT order/layout for Solaris/x86 targets.
* testsuite/ld-elf/linkinfo1b.d: Likewise.
This is in preparation for the next patch adding Spectre variant 2
mitigation for PowerPC and PowerPC64. Besides tidying code involved
in stub output (to reduce the number of places where bctr is output),
the patch adds some user visible features:
1) PowerPC64 ELFv2 global entry stubs now are aligned under the
control of --plt-align, with a default alignment of 32 bytes.
2) PowerPC64 __glink_PLTresolve is no longer padded out with nops.
3) PowerPC32 PLT stubs are aligned under the control of --plt-align,
with the default alignment being 16 bytes as before.
4) The PowerPC32 branch/nop table emitted before __glink_PLTresolve
is now smaller in many cases. It was sized incorrectly when the
__tls_get_addr_opt stub was used, and unnecessarily included space
for local ifuncs.
bfd/
* elf32-ppc.c (GLINK_ENTRY_SIZE): Add parameters, handle
__tls_get_addr_opt, and alignment sizing.
(TLS_GET_ADDR_GLINK_SIZE): Delete.
(is_nonpic_glink_stub): Don't use GLINK_ENTRY_SIZE.
(ppc_elf_get_synthetic_symtab): Recognize stubs spaced at 4, 6,
or 8 insns.
(ppc_elf_link_hash_table_create): Init new ppc_elf_params field.
(allocate_dynrelocs): Use new GLINK_ENTRY_SIZE.
(ppc_elf_size_dynamic_sections): Likewise. Size branch table
by PLT reloc count.
(write_glink_stub): Handle __tls_get_addr_opt stub.
Pad out to size given by GLINK_ENTRY_SIZE.
(ppc_elf_relocate_section): Adjust write_glink_stub call.
(ppc_elf_finish_dynamic_symbol): Likewise.
(ppc_elf_finish_dynamic_sections): Write PLTresolve without using
insn array since so many need rewriting.
* elf32-ppc.h (struct ppc_elf_params): Add plt_stub_align.
* elf64-ppc.c (GLINK_PLTRESOLVE_SIZE): Rename from
GLINK_CALL_STUB_SIZE. Add htab param and evaluate to size without
nops. Adjust all uses.
(ppc64_elf_get_synthetic_symtab): Don't use GLINK_CALL_STUB_SIZE
in glink_vma calculation.
(struct ppc_link_hash_table): Add global_entry section pointer.
(create_linkage_sections): Create separate section for global
entry stubs.
(PPC_LO, PPC_HI, PPC_HA): Move earlier.
(size_global_entry_stubs): Handle sizing for aligned stubs.
(ppc64_elf_size_dynamic_sections): Handle global_entry alloc,
and don't stash end of glink branch table in rawsize.
(ppc_build_one_stub): Rewrite stub size calculations.
(build_global_entry_stubs): Use new section.
(ppc64_elf_build_stubs): Don't pad __glink_PLTresolve with nops.
Build lazy link stubs out to end of section. Build global entry
stubs in new section.
gold/
* options.h (plt_align): Support for PowerPC32 too.
* powerpc.cc (Stub_table::stub_align): Heed --plt-align for 32-bit.
(Stub_table::plt_call_size, branch_stub_size): Tidy.
(Stub_table::plt_call_align): Implement using stub_align.
(Output_data_glink::global_entry_align): New function.
(Output_data_glink::global_entry_off): New function.
(Output_data_glink::global_entry_address): Use global_entry_off.
(Output_data_glink::pltresolve_size): New function, replacing
pltresolve_size_ constant. Update all uses.
(Output_data_glink::add_global_entry): Align offset.
(Output_data_glink::set_final_data_size): Use global_entry_align.
(Stub_table::do_write): Don't pad __glink_PLTrelsolve with nops.
Tidy stub output. Use global_entry_off.
ld/
* emultempl/ppc32elf.em (params): Init new field.
(enum ppc32_opt): New enum to define OPTION_* values. Add
OPTION_PLT_ALIGN and OPTION_NO_PLT_ALIGN.
(PARSE_AND_LIST_LONGOPTS): Handle new options.
(PARSE_AND_LIST_ARGS_CASES): Likewise.
(PARSE_AND_LIST_OPTIONS): Likewise. Break up help output.
* emultempl/ppc64elf.em (ppc_add_stub_section): Init alignment
correctly for negative --plt-stub-align.
* testsuite/ld-powerpc/elfv2exe.d,
* testsuite/ld-powerpc/elfv2so.d,
* testsuite/ld-powerpc/relbrlt.d,
* testsuite/ld-powerpc/relbrlt.s,
* testsuite/ld-powerpc/tlsexe.d,
* testsuite/ld-powerpc/tlsexe.r,
* testsuite/ld-powerpc/tlsexe32.d,
* testsuite/ld-powerpc/tlsexe32.g,
* testsuite/ld-powerpc/tlsexe32.r,
* testsuite/ld-powerpc/tlsexetoc.d,
* testsuite/ld-powerpc/tlsexetoc.r,
* testsuite/ld-powerpc/tlsopt5_32.d,
* testsuite/ld-powerpc/tlsso.d,
* testsuite/ld-powerpc/tlstocso.d: Update for changed stub order.
When I added this test I said I'd look at fixing more targets.
That hasn't happened yet, so xfail to tidy results.
* testsuite/ld-elf/elf.exp: xfail "pr22374 function pointer
initialization" for currently failing targets.
PowerPC64 has its own mark_dynamic_ref, which needs the same change as
made by d664fd41e1 to the generic ELF version. Some other targets
discard more than just .data, so allow for that too in expected ld
messages.
bfd/
PR ld/22649
* elf64-ppc.c (ppc64_elf_gc_mark_dynamic_ref): Ignore dynamic
references on forced local symbols.
ld/
PR ld/22649
* testsuite/ld-elf/pr22649.msg: Allow other messages.
* testsuite/ld-elf/shared.exp: Check that --gc-sections is
supported before running ld/22649 tests.
Although they aren't passed to linker, we should get it right.
* testsuite/ld-elf/pr22393-2a.rd: Replace "-z textonly" with
"-z separate-code".
* testsuite/ld-elf/pr22393-2b.rd: Likewise.
* testsuite/ld-x86-64/pr22393-3a.rd: Likewise.
* testsuite/ld-x86-64/pr22393-3b.rd: Likewise.
We should ignore dynamic references on forced local symbols during
garbage collection since they can never be referenced dynamically.
bfd/
PR ld/22649
* elflink.c (bfd_elf_gc_mark_dynamic_ref_symbol): Ignore dynamic
references on forced local symbols.
ld/
PR ld/22649
* testsuite/ld-elf/pr22649-1.s: New file.
* testsuite/ld-elf/pr22649-2a.s: Likewise.
* testsuite/ld-elf/pr22649-2b.s: Likewise.
* testsuite/ld-elf/pr22649.msg: Likewise.
* testsuite/ld-elf/shared.exp: Run ld/22649 tests.
We must keep all PREINIT_ARRAY, INIT_ARRAY as well as FINI_ARRAY sections
for ld -r --gc-sections.
bfd/
PR ld/22677
* elflink.c (bfd_elf_gc_sections): Keep all PREINIT_ARRAY,
INIT_ARRAY as well as FINI_ARRAY sections for ld -r --gc-sections.
ld/
PR ld/22677
* scripttempl/elf.sc (PREINIT_ARRAY): New.
Don't add .preinit_array for ld -r.
* testsuite/ld-elf/pr22677.d: New file.
* testsuite/ld-elf/pr22677.s: Likewise.
In a linker script, a sequence like this:
foo = ADDR (.some_section);
bar = foo;
PROVIDE (foo = 0);
will result in 'bar = ADDR (.some_section)' and 'foo = 0', which seems
like incorrect behaviour, foo is clearly defined elsewhere, and so the
PROVIDE should not trigger.
The problem is that an expression like this:
foo = ADDR (.some_section);
can't be evaluated until a late phase of the linker, due to the need
for the section '.some_section' to have been placed, then the PROVIDE
was being marked as being used during an earlier phase. At the end of
the link, both lines:
foo = ADDR (.some_section);
PROVIDE (foo = 0);
are active, and this causes the final value of 'foo' to be 0.
The solution proposed in this commit is that, during earlier phases of
the linker, when we see the expression 'foo = ADDR (.some_section);',
instead of ignoring the expression, we create a "fake" definition of
'foo'. The existence of this "fake" definition prevents the PROVIDE
from being marked used, and during the final phase the real definition
of 'foo' will replace the "fake" definition.
The new test provide-6 covers the exact case described above. The
provide-7 test is similar to the above, but using constant
expressions, this was never broken, but is added here to increase
coverage.
The provide-8 case also didn't fail before this commit, but I did
manage to break this case during development of this patch. This case
was only covered by a mmix test before, so I've added this here to
increase coverage.
ld/ChangeLog:
* ldexp.c (exp_fold_tree_1): Rework condition underwhich provide
nodes are ignored in the tree walk, and move the location at which
we change provide nodes into provided nodes.
(exp_init_os): Add etree_provided.
* testsuite/ld-scripts/provide-6.d: New file.
* testsuite/ld-scripts/provide-6.t: New file.
* testsuite/ld-scripts/provide-7.d: New file.
* testsuite/ld-scripts/provide-7.t: New file.
* testsuite/ld-scripts/provide-8.d: New file.
* testsuite/ld-scripts/provide-8.t: New file.
Find the ld-script/provide-*.d tests using a wildcard, then run them in
a loop. This will make it easier to add more tests in the future. Some
associated clean up is required.
ld/ChangeLog:
* testsuite/ld-scripts/provide-3.d: Add xfail directive.
* testsuite/ld-scripts/provide-4.d: Use new map file name.
* testsuite/ld-scripts/provide-5.d: Use new map file name.
* testsuite/ld-scripts/provide-4-map.d: Renamed to...
* testsuite/ld-scripts/provide-4.map: ...this.
* testsuite/ld-scripts/provide-5-map.d: Renamed to...
* testsuite/ld-scripts/provide-5.map: ...this.
* testsuite/ld-scripts/provide.exp: Move xfail into provide-3.d
file, and run tests in a loop.
Currently when recording a PROVIDE statement in a linker map file we
display something like:
PROVIDE (SYMBOL, VALUE)
However, in a linker script we write these statements like this:
PROVIDE (SYMBOL = VALUE);
This commit changes the output in the map file to be closer to linker
script format, the map file now contains:
PROVIDE (SYMBOL = VALUE)
The ';' is still missing from the end, but map files are not intended
to be valid linker script input, so adding the ';' just seems like
clutter.
ld/ChangeLog:
* ldexp.c (exp_print_tree): Use '=' instead of ',' when printing
PROVIDE statements.
* testsuite/ld-scripts/provide-4.map: Update expected output.
* testsuite/ld-scripts/provide-5.map: Likewise.
R_AARCH64_ABS64, R_AARCH64_ABS32 and R_AARCH64_ABS16 are data relocations
supported in AArch64 elf ABI.
R_AARCH64_ABS64 under LP64 is allowed in shared object and a dynamic relocation entry
will be generated. This allows the dynamic linker to do further symbol resolution.
R_AARCH64_ABS32 likewise is allowed in shared object, however under ILP32 abi.
The original behavior for R_AARCH64_ABS32 under LP64 is that, it's allowed
in shared object and silently resolved at static linking time.
No dynamic relocation entry is generate for it.
R_AARCH64_ABS16 is allowed in shared object under both L64 and ILP32.
It's resolved at static linking time as well.
Under LP64, the address should be 64-bit. R_AARCH64_ABS32 relocation indicates
an address that is only sized 32 bits which is meaningless in LP64 shared object.
It's useful to error out.
I have checked glibc dynamic linker code, R_AARCH64_ABS16 is not supported at all. So
R_AARCH64_ABS16 should be reject in shared object completely.
In this patch, R_AARCH64_ABS32 is rejected under LP64 in constant section of shared object.
R_AARCH64_ABS16 is rejected in constant section of shared object in both ABI.
This will sometimes provide useful information for buggy code.
PR 22465
* testsuite/ld-elf/interleave.s: Use .data sections and provide
section attrs.
* testsuite/ld-elf/interleave.ld: Discard other sections. Adjust
for changed section names.
PR 22465
binutils/
* objcopy.c (copy_section): New local extra. If isection->lma not
exactly divisible by interleave, then bias from. Also adjust
osection->lma if necessary.
ld/
* testsuite/ld-elf/interleave-0.d, testsuite/ld-elf/interleave-4.d,
* testsuite/ld-elf/interleave.ld, testsuite/ld-elf/interleave.s: New.
These claim to support shared libs when configuring for <target>-linux
(in contrast to <target>-elf which doesn't support shared libs).
* testsuite/lib/ld-lib.exp (check_shared_lib_support): Return true
for frv, lm32, m32r, microblaze, nds32 and or1k linux targets.
