As on amd64, these registers hold the base address of the fs and gs
segments, respectively. For i386 these two registers are 32 bits.
gdb/ChangeLog:
* amd64-fbsd-nat.c (amd64_fbsd_nat_target::read_description):
Update calls to i386_target_description to add 'segments'
parameter.
* amd64-tdep.c (amd64_init_abi): Set tdep->fsbase_regnum. Don't
add segment base registers.
* arch/i386.c (i386_create_target_description): Add 'segments'
parameter to enable segment base registers.
* arch/i386.h (i386_create_target_description): Likewise.
* features/i386/32bit-segments.xml: New file.
* features/i386/32bit-segments.c: Generate.
* i386-fbsd-nat.c (i386_fbsd_nat_target::read_description): Update
call to i386_target_description to add 'segments' parameter.
* i386-fbsd-tdep.c (i386fbsd_core_read_description): Likewise.
* i386-go32-tdep.c (i386_go32_init_abi): Likewise.
* i386-linux-tdep.c (i386_linux_read_description): Likewise.
* i386-tdep.c (i386_validate_tdesc_p): Add segment base registers
if feature is present.
(i386_gdbarch_init): Pass I386_NUM_REGS to set_gdbarch_num_regs.
Add 'segments' parameter to call to i386_target_description.
(i386_target_description): Add 'segments' parameter to enable
segment base registers.
(_initialize_i386_tdep) [GDB_SELF_TEST]: Add 'segments' parameter
to call to i386_target_description.
* i386-tdep.h (struct gdbarch_tdep): Add 'fsbase_regnum'.
(enum i386_regnum): Add I386_FSBASE_REGNUM and I386_GSBASE_REGNUM.
Define I386_NUM_REGS.
(i386_target_description): Add 'segments' parameter to enable
segment base registers.
gdb/gdbserver/ChangeLog:
* linux-x86-tdesc.c (i386_linux_read_description): Update call to
i386_create_target_description for 'segments' parameter.
* lynx-i386-low.c (lynx_i386_arch_setup): Likewise.
* nto-x86-low.c (nto_x86_arch_setup): Likewise.
* win32-i386-low.c (i386_arch_setup): Likewise.
This removes the last cleanup from gdbserver, replacing it with
SCOPE_EXIT. This could perhaps be done in a different way, but this
approach was direct and obviously correct.
2019-03-06 Tom Tromey <tom@tromey.com>
* server.c (detach_or_kill_for_exit_cleanup): Remove parameter.
(captured_main): Use SCOPE_EXIT.
On commit 8ecfd7bd4a ("Add parameter to
allow enabling/disabling selftests via configure") it seems that I
forgot to use the proper '$enable_unittest' variable when checking to
see whether to add selftest-related objects to 'srv_regobj'. This
causes a build failure on Aarch64 when 'development=false' (which is
the case for the 8.3 branch) and 'enable_unittest=true'.
This patch fixes the problem by using '$enable_unittest' instead of
'$development' when performing the check. As a reminder, it's
important to notice that '$enable_unittest's default value (i.e., when
the option '--enable-unit-tests' is not passed to configure) is the
same as '$development', so this patch doesn't affect the current
build.
I'd like to install this patch both on master and on the 8.3 branch.
OK?
gdb/gdbserver/ChangeLog:
2019-03-04 Sergio Durigan Junior <sergiodj@redhat.com>
* configure.srv: Use '$enable_unittest' instead of '$development'
when checking whether to fill 'srv_regobj' on 'aarch64*-*-linux*'
case.
gdb/ChangeLog:
2019-03-02 Eli Zaretskii <eliz@gnu.org>
PR gdb/24292
* common/netstuff.c:
* gdbserver/gdbreplay.c
* gdbserver/remote-utils.c:
* ser-tcp.c:
* unittests/parse-connection-spec-selftests.c [USE_WIN32API]:
Include ws2tcpip.h instead of wsiapi.h and winsock2.h. Redefine
_WIN32_WINNT to 0x0501 if defined to a smaller value, as
'getaddrinfo' and 'freeaddrinfo' were not available before
Windows XP, and mingw.org's MinGW headers by default define
_WIN32_WINNT to 0x500.
I tried gdbreplay yesterday, but the remotelogfile I received was made
on Windows, so the lines were terminated with \r\n rather than plain
\n.
This patch changes gdbreplay to allow \r\n line termination when
reading the log file.
gdb/gdbserver/ChangeLog
2019-02-27 Tom Tromey <tromey@adacore.com>
* gdbreplay.c (logchar): Handle \r\n.
The recent BP/WP changes for AArch64 swapping the order in add_lwp()
so that the process was added before the lwp. This was due to the lwp
creation requiring the process data.
This also needs changing in linux_attach().
Also add additional checks to make sure cannot attach to the same
process twice. Add test case for this - do this by splitting
attach.exp into distinct pass and error case sections.
Fixes gdb.server/ext-attach.exp on Aarch64.
gdb/gdbserver/ChangeLog:
* linux-low.c (linux_attach): Add process before lwp.
* server.c (attach_inferior): Check if already attached.
gdb/testsuite/ChangeLog:
* gdb.base/attach.exp: Add double attach test.
While working on my other scripts to deal with gdb headers, I noticed
that some files were missing include guards. I wrote a script to add
the missing ones, but found that using the obvious names for the
guards ran into clashes -- for example, gdb/nat/linux-nat.h used
"LINUX_NAT_H", but this was also the script's choice for
gdb/linux-nat.h.
So, I changed the script to normalize all include guards in gdb. This
patch is the result.
As usual the script is available here:
https://github.com/tromey/gdb-refactoring-scripts
Tested by rebuilding; I also ran it through "Fedora-x86_64-m64" on the
buildbot.
gdb/ChangeLog
2019-02-07 Tom Tromey <tom@tromey.com>
* yy-remap.h: Add include guard.
* xtensa-tdep.h: Add include guard.
* xcoffread.h: Rename include guard.
* varobj-iter.h: Add include guard.
* tui/tui.h: Rename include guard.
* tui/tui-winsource.h: Rename include guard.
* tui/tui-wingeneral.h: Rename include guard.
* tui/tui-windata.h: Rename include guard.
* tui/tui-win.h: Rename include guard.
* tui/tui-stack.h: Rename include guard.
* tui/tui-source.h: Rename include guard.
* tui/tui-regs.h: Rename include guard.
* tui/tui-out.h: Rename include guard.
* tui/tui-layout.h: Rename include guard.
* tui/tui-io.h: Rename include guard.
* tui/tui-hooks.h: Rename include guard.
* tui/tui-file.h: Rename include guard.
* tui/tui-disasm.h: Rename include guard.
* tui/tui-data.h: Rename include guard.
* tui/tui-command.h: Rename include guard.
* tic6x-tdep.h: Add include guard.
* target/waitstatus.h: Rename include guard.
* target/wait.h: Rename include guard.
* target/target.h: Rename include guard.
* target/resume.h: Rename include guard.
* target-float.h: Rename include guard.
* stabsread.h: Add include guard.
* rs6000-tdep.h: Add include guard.
* riscv-fbsd-tdep.h: Add include guard.
* regformats/regdef.h: Rename include guard.
* record.h: Rename include guard.
* python/python.h: Rename include guard.
* python/python-internal.h: Rename include guard.
* python/py-stopevent.h: Rename include guard.
* python/py-ref.h: Rename include guard.
* python/py-record.h: Rename include guard.
* python/py-record-full.h: Rename include guard.
* python/py-record-btrace.h: Rename include guard.
* python/py-instruction.h: Rename include guard.
* python/py-events.h: Rename include guard.
* python/py-event.h: Rename include guard.
* procfs.h: Add include guard.
* proc-utils.h: Add include guard.
* p-lang.h: Add include guard.
* or1k-tdep.h: Rename include guard.
* observable.h: Rename include guard.
* nto-tdep.h: Rename include guard.
* nat/x86-linux.h: Rename include guard.
* nat/x86-linux-dregs.h: Rename include guard.
* nat/x86-gcc-cpuid.h: Add include guard.
* nat/x86-dregs.h: Rename include guard.
* nat/x86-cpuid.h: Rename include guard.
* nat/ppc-linux.h: Rename include guard.
* nat/mips-linux-watch.h: Rename include guard.
* nat/linux-waitpid.h: Rename include guard.
* nat/linux-ptrace.h: Rename include guard.
* nat/linux-procfs.h: Rename include guard.
* nat/linux-osdata.h: Rename include guard.
* nat/linux-nat.h: Rename include guard.
* nat/linux-namespaces.h: Rename include guard.
* nat/linux-btrace.h: Rename include guard.
* nat/glibc_thread_db.h: Rename include guard.
* nat/gdb_thread_db.h: Rename include guard.
* nat/gdb_ptrace.h: Rename include guard.
* nat/fork-inferior.h: Rename include guard.
* nat/amd64-linux-siginfo.h: Rename include guard.
* nat/aarch64-sve-linux-sigcontext.h: Rename include guard.
* nat/aarch64-sve-linux-ptrace.h: Rename include guard.
* nat/aarch64-linux.h: Rename include guard.
* nat/aarch64-linux-hw-point.h: Rename include guard.
* mn10300-tdep.h: Add include guard.
* mips-linux-tdep.h: Add include guard.
* mi/mi-parse.h: Rename include guard.
* mi/mi-out.h: Rename include guard.
* mi/mi-main.h: Rename include guard.
* mi/mi-interp.h: Rename include guard.
* mi/mi-getopt.h: Rename include guard.
* mi/mi-console.h: Rename include guard.
* mi/mi-common.h: Rename include guard.
* mi/mi-cmds.h: Rename include guard.
* mi/mi-cmd-break.h: Rename include guard.
* m2-lang.h: Add include guard.
* location.h: Rename include guard.
* linux-record.h: Rename include guard.
* linux-nat.h: Add include guard.
* linux-fork.h: Add include guard.
* i386-darwin-tdep.h: Rename include guard.
* hppa-linux-offsets.h: Add include guard.
* guile/guile.h: Rename include guard.
* guile/guile-internal.h: Rename include guard.
* gnu-nat.h: Rename include guard.
* gdb-stabs.h: Rename include guard.
* frv-tdep.h: Add include guard.
* f-lang.h: Add include guard.
* event-loop.h: Add include guard.
* darwin-nat.h: Rename include guard.
* cp-abi.h: Rename include guard.
* config/sparc/nm-sol2.h: Rename include guard.
* config/nm-nto.h: Rename include guard.
* config/nm-linux.h: Add include guard.
* config/i386/nm-i386gnu.h: Rename include guard.
* config/djgpp/nl_types.h: Rename include guard.
* config/djgpp/langinfo.h: Rename include guard.
* compile/gcc-cp-plugin.h: Add include guard.
* compile/gcc-c-plugin.h: Add include guard.
* compile/compile.h: Rename include guard.
* compile/compile-object-run.h: Rename include guard.
* compile/compile-object-load.h: Rename include guard.
* compile/compile-internal.h: Rename include guard.
* compile/compile-cplus.h: Rename include guard.
* compile/compile-c.h: Rename include guard.
* common/xml-utils.h: Rename include guard.
* common/x86-xstate.h: Rename include guard.
* common/version.h: Rename include guard.
* common/vec.h: Rename include guard.
* common/tdesc.h: Rename include guard.
* common/selftest.h: Rename include guard.
* common/scoped_restore.h: Rename include guard.
* common/scoped_mmap.h: Rename include guard.
* common/scoped_fd.h: Rename include guard.
* common/safe-iterator.h: Rename include guard.
* common/run-time-clock.h: Rename include guard.
* common/refcounted-object.h: Rename include guard.
* common/queue.h: Rename include guard.
* common/ptid.h: Rename include guard.
* common/print-utils.h: Rename include guard.
* common/preprocessor.h: Rename include guard.
* common/pathstuff.h: Rename include guard.
* common/observable.h: Rename include guard.
* common/netstuff.h: Rename include guard.
* common/job-control.h: Rename include guard.
* common/host-defs.h: Rename include guard.
* common/gdb_wait.h: Rename include guard.
* common/gdb_vecs.h: Rename include guard.
* common/gdb_unlinker.h: Rename include guard.
* common/gdb_unique_ptr.h: Rename include guard.
* common/gdb_tilde_expand.h: Rename include guard.
* common/gdb_sys_time.h: Rename include guard.
* common/gdb_string_view.h: Rename include guard.
* common/gdb_splay_tree.h: Rename include guard.
* common/gdb_setjmp.h: Rename include guard.
* common/gdb_ref_ptr.h: Rename include guard.
* common/gdb_optional.h: Rename include guard.
* common/gdb_locale.h: Rename include guard.
* common/gdb_assert.h: Rename include guard.
* common/filtered-iterator.h: Rename include guard.
* common/filestuff.h: Rename include guard.
* common/fileio.h: Rename include guard.
* common/environ.h: Rename include guard.
* common/common-utils.h: Rename include guard.
* common/common-types.h: Rename include guard.
* common/common-regcache.h: Rename include guard.
* common/common-inferior.h: Rename include guard.
* common/common-gdbthread.h: Rename include guard.
* common/common-exceptions.h: Rename include guard.
* common/common-defs.h: Rename include guard.
* common/common-debug.h: Rename include guard.
* common/cleanups.h: Rename include guard.
* common/buffer.h: Rename include guard.
* common/btrace-common.h: Rename include guard.
* common/break-common.h: Rename include guard.
* cli/cli-utils.h: Rename include guard.
* cli/cli-style.h: Rename include guard.
* cli/cli-setshow.h: Rename include guard.
* cli/cli-script.h: Rename include guard.
* cli/cli-interp.h: Rename include guard.
* cli/cli-decode.h: Rename include guard.
* cli/cli-cmds.h: Rename include guard.
* charset-list.h: Add include guard.
* buildsym-legacy.h: Rename include guard.
* bfin-tdep.h: Add include guard.
* ax.h: Rename include guard.
* arm-linux-tdep.h: Add include guard.
* arm-fbsd-tdep.h: Add include guard.
* arch/xtensa.h: Rename include guard.
* arch/tic6x.h: Add include guard.
* arch/i386.h: Add include guard.
* arch/arm.h: Rename include guard.
* arch/arm-linux.h: Rename include guard.
* arch/arm-get-next-pcs.h: Rename include guard.
* arch/amd64.h: Add include guard.
* arch/aarch64-insn.h: Rename include guard.
* arch-utils.h: Rename include guard.
* annotate.h: Add include guard.
* amd64-darwin-tdep.h: Rename include guard.
* aarch64-linux-tdep.h: Add include guard.
* aarch64-fbsd-tdep.h: Add include guard.
* aarch32-linux-nat.h: Add include guard.
gdb/gdbserver/ChangeLog
2019-02-07 Tom Tromey <tom@tromey.com>
* x86-tdesc.h: Rename include guard.
* x86-low.h: Add include guard.
* wincecompat.h: Rename include guard.
* win32-low.h: Add include guard.
* utils.h: Rename include guard.
* tracepoint.h: Rename include guard.
* tdesc.h: Rename include guard.
* target.h: Rename include guard.
* server.h: Rename include guard.
* remote-utils.h: Rename include guard.
* regcache.h: Rename include guard.
* nto-low.h: Rename include guard.
* notif.h: Add include guard.
* mem-break.h: Rename include guard.
* lynx-low.h: Add include guard.
* linux-x86-tdesc.h: Add include guard.
* linux-s390-tdesc.h: Add include guard.
* linux-ppc-tdesc-init.h: Add include guard.
* linux-low.h: Add include guard.
* linux-aarch64-tdesc.h: Add include guard.
* linux-aarch32-low.h: Add include guard.
* inferiors.h: Rename include guard.
* i387-fp.h: Rename include guard.
* hostio.h: Rename include guard.
* gdbthread.h: Rename include guard.
* gdb_proc_service.h: Rename include guard.
* event-loop.h: Rename include guard.
* dll.h: Rename include guard.
* debug.h: Rename include guard.
* ax.h: Rename include guard.
The IPA objects currently may use gnulib replacement apis, which is
wrong: gnulib is not linked into the produced dso and it cannot be
because it is not built with -fPIC -fvisibility=hidden.
The gnulib replacement detection is broken under cross compilation:
for targets other than *-gnu*, replacements are enabled that depend
on execution time detection. This causes unnecessary build failure
when the target has proper support for the replaced api.
This fix tries to undo the replacements, which is tricky because the
gnulib headers are still used for various compile time fixups and
there is no simple knob in gnulib to only turn the replacements off.
Without this workaround gdb fails to cross build to non-gnu targets:
ld: tracepoint-ipa.o: in function `gdb_agent_helper_thread(void*)':
gdb/gdbserver/tracepoint.c:7221: undefined reference to `rpl_strerror'
...
Makefile:434: recipe for target 'libinproctrace.so' failed
gdb/gdbserver/ChangeLog:
PR gdb/23985
* Makefile.in (IPAGENT_CFLAGS): Add UNDO_GNULIB_CFLAGS.
(UNDO_GNULIB_CFLAGS): Undo gnulib replacements.
The recent BP/WP changes for AArch64 swapping the order in add_lwp()
so that the process was added before the lwp. This was due to the lwp
creation requiring the process data.
This also needs changing in linux_attach().
Fixes gdb.server/ext-attach.exp on Aarch64.
(This regression was hidden due to the racy nature of the gdb.server
tests - now they are no longer racy it'll be easier to spot. Also
checked X86).
gdb/gdbserver/ChangeLog:
2019-01-25 Alan Hayward <alan.hayward@arm.com>
* linux-low.c (linux_attach): Add process before lwp.
This changes the Makefiles to remove the -I for the common/
subdirectory. This will enforce the rule that includes must use the
'common/filename.h' form.
gdb/ChangeLog
2019-01-25 Tom Tromey <tom@tromey.com>
* Makefile.in (GDB_CFLAGS): Don't add -I for common.
gdb/gdbserver/ChangeLog
2019-01-25 Tom Tromey <tom@tromey.com>
* Makefile.in (INCLUDE_CFLAGS): Don't add -I for common.
gdb/ChangeLog:
* top.c (print_gdb_version): Update Copyright year in version
message.
gdb/gdbserver/ChangeLog:
* gdbreplay.c (gdbreplay_version): Update copyright year in
version message.
* server.c (gdbserver_version): Likewise.
This commit applies all changes made after running the gdb/copyright.py
script.
Note that one file was flagged by the script, due to an invalid
copyright header
(gdb/unittests/basic_string_view/element_access/char/empty.cc).
As the file was copied from GCC's libstdc++-v3 testsuite, this commit
leaves this file untouched for the time being; a patch to fix the header
was sent to gcc-patches first.
gdb/ChangeLog:
Update copyright year range in all GDB files.
On some heavily loaded AArch64 boxes, GDB will sometimes hang forever when
the inferior creates a thread. This hang happens inside the kernel during
the ptrace call to set hardware watchpoints or hardware breakpoints.
Currently, GDB will always set hw wp/bp at the start of each thread even if
there are none set in the process.
This patch works around the issue by avoiding setting hw wp/bp if there
are none set for the process.
On an effected machine, this fix drastically reduces the racy nature of the
gdb.threads test set. I ran the entire gdb test suite across all processors
for 100 iterations, then ran the results through the racy tests script.
Without the patch, 58 .exp files in gdb.threads were marked as racy. After
the patch this reduced to the same ~14 tests as the non effected boxes.
Clearly GDB will still be subject to hangs on an effect box if hw wp/bp's are
used prior to creating inferior threads on a heavily loaded system.
To enable this in gdbserver, the sequence in gdbserver add_lwp() is switched
to the same as gdb order as gdb, to ensure the thread is registered before
calling new_thread(). This allows aarch64_linux_new_thread() to read the
ptid.
gdb/ChangeLog:
* nat/aarch64-linux-hw-point.c
(aarch64_linux_any_set_debug_regs_state): New function.
* nat/aarch64-linux-hw-point.h
(aarch64_linux_any_set_debug_regs_state): New declaration.
* nat/aarch64-linux.c (aarch64_linux_new_thread): Check if any
BPs or WPs are set.
gdb/gdbserver/ChangeLog:
* linux-low.c (add_lwp): Switch ordering.
-fsanitize=address pointed out a use-after-free in gdbserver. In
particular, handle_detach could reference "process" after it was
deleted by detach_inferior. Avoiding this also necessitated changing
target_ops::join to take a pid rather than a process_info*.
Tested by the buildbot using a few of the gdbserver builders.
gdb/gdbserver/ChangeLog
2018-11-29 Tom Tromey <tom@tromey.com>
* win32-low.c (win32_join): Take pid, not process.
* target.h (struct target_ops) <join>: Change argument type.
(join_inferior): Change argument name.
* spu-low.c (spu_join): Take pid, not process.
* server.c (handle_detach): Preserve pid before destroying
process.
* lynx-low.c (lynx_join): Take pid, not process.
* linux-low.c (linux_join): Take pid, not process.
The cannot store/fetch register functions are only used for checking
if a register can be accessed using PEEKUSER/POKEUSER.
The AArch64 port doesn't support this method of access, so remove the
unused functions.
gdb/gdbserver:
* linux-aarch64-low.c (aarch64_cannot_store_register): Remove.
(aarch64_cannot_fetch_register): Likewise.
(struct linux_target_ops): Update references.
Patch "[PowerPC] Add support for PPR and DSCR" used
PTRACE_GETREGSET/SETREGSET without including the fallback definitions
from "nat/linux-ptrace.h". Include this header to avoid breaking
builds in systems that don't define them.
gdb/ChangeLog:
2018-10-31 Pedro Franco de Carvalho <pedromfc@linux.ibm.com>
* ppc-linux-nat.c: Include nat/linux-ptrace.h.
gdb/gdbserver/ChangeLog:
2018-10-31 Pedro Franco de Carvalho <pedromfc@linux.ibm.com>
* linux-ppc-low.c: Include nat/linux-ptrace.h.
This patch adds support for Hardware Transactional Memory registers
for the powerpc linux native and core file targets, and for the
pwoerpc linux server stub.
These registers include both the HTM special-purpose registers (TFHAR,
TEXASR and TFIAR) as well as the set of registers that are
checkpointed (saved) when a transaction is initiated, which the
processor restores in the event of a transaction failure.
The set of checkpointed general-purpose registers is returned by the
linux kernel in the same format as the regular general-purpose
registers, defined in struct pt_regs. However, the architecture
specifies that only some of the registers present in pt_regs are
checkpointed (GPRs 0-31, CR, XER, LR and CTR). The kernel fills the
slots for MSR and NIP with other info. The other fields usually don't
have meaningful values. GDB doesn't define registers that are not
checkpointed in the architecture, but when generating a core file, GDB
fills the slot for the checkpointed MSR with the regular MSR. These
are usually similar, although some bits might be different, and in
some cases the checkpointed MSR will have a value of 0 in a
kernel-generated core-file. The checkpointed NIP is filled with TFHAR
by GDB in the core-file, which is what the kernel does. The other
fields are set to 0 by GDB.
Core files generated by the kernel have a note section for
checkpointed GPRs with the same size for both 32-bit and 64-bit
threads, and the values for the registers of a 32-bit thread are
squeezed in the first half, with no useful data in the second half.
GDB generates a smaller note section for 32-bit threads, but can read
both sizes.
The checkpointed XER is required to be 32-bit in the target
description documentation, even though the more recent ISAs define it
as 64-bit wide, since the high-order 32-bits are reserved, and because
in Linux there is no way to get a 64-bit checkpointed XER for 32-bit
threads. If this changes in the future, the target description
feature requirement can be relaxed to allow for a 64-bit checkpointed
XER.
Access to the checkpointed CR (condition register) can be confusing.
The architecture only specifies that CR fields 1 to 7 (the 24 least
significant bits) are checkpointed, but the kernel provides all 8
fields (32 bits). The value of field 0 is not masked by ptrace, so it
will sometimes show the result of some kernel operation, probably
treclaim., which sets this field.
The checkpointed registers are marked not to be saved and restored.
Inferior function calls during an active transaction don't work well,
and it's unclear what should be done in this case. TEXASR and TFIAR
can be altered asynchronously, during transaction failure recording,
so they are also not saved and restored. For consistency neither is
TFHAR.
Record and replay also doesn't work well when transactions are
involved. This patch doesn't address this, so the values of the HTM
SPRs will sometimes be innacurate when the record/relay target is
enabled. For instance, executing a "tbegin." alters TFHAR and TEXASR,
but these changes are not currently recorded.
Because the checkpointed registers are only available when a
transaction is active (or suspended), ptrace can return ENODATA when
gdb tries to read these registers and the inferior is not in a
transactional state. The registers are set to the unavailable state
when this happens. When gbd tries to write to one of these registers,
and it is unavailable, an error is raised.
The "fill" functions for checkpointed register sets in the server stub
are not implemented for the same reason as for the EBB register set,
since ptrace can also return ENODATA for checkpointed regsets. The
same issues with 'G' packets apply here.
Just like for the EBB registers, tracepoints will not mark the
checkpointed registers as unavailable if the inferior was not in a
transaction, so their content will also show 0 instead of
<unavailable> when inspecting trace data.
The new tests record the values of the regular registers before
stepping the inferior through a "tbegin." instruction to start a
transaction, then the checkpointed registers are checked against the
recorded pre-transactional values. New values are written to the
checkpointed registers and recorded, the inferior continues until the
transaction aborts (which is usually immediately when it is resumed),
and the regular registers are checked against the recorded values,
because the abort should have reverted the registers to these values.
Like for the EBB registers, target_store_registers will ignore the
checkpointed registers when called with -1 as the regno
argument (store all registers in one go).
gdb/ChangeLog:
2018-10-26 Edjunior Barbosa Machado <emachado@linux.vnet.ibm.com>
Pedro Franco de Carvalho <pedromfc@linux.ibm.com>
* arch/ppc-linux-tdesc.h (tdesc_powerpc_isa207_htm_vsx32l)
(tdesc_powerpc_isa207_htm_vsx64l): Declare.
* arch/ppc-linux-common.h (PPC_LINUX_SIZEOF_TM_SPRREGSET)
(PPC32_LINUX_SIZEOF_CGPRREGSET, PPC64_LINUX_SIZEOF_CGPRREGSET)
(PPC_LINUX_SIZEOF_CFPRREGSET, PPC_LINUX_SIZEOF_CVMXREGSET)
(PPC_LINUX_SIZEOF_CVSXREGSET, PPC_LINUX_SIZEOF_CPPRREGSET)
(PPC_LINUX_SIZEOF_CDSCRREGSET, PPC_LINUX_SIZEOF_CTARREGSET):
Define.
(struct ppc_linux_features) <htm>: New field.
(ppc_linux_no_features): Add initializer for htm field.
* arch/ppc-linux-common.c (ppc_linux_match_description): Return
new tdescs.
* nat/ppc-linux.h (PPC_FEATURE2_HTM, NT_PPC_TM_CGPR)
(NT_PPC_TM_CFPR, NT_PPC_TM_CVMX, NT_PPC_TM_CVSX)
(NT_PPC_TM_SPR, NT_PPC_TM_CTAR, NT_PPC_TM_CPPR, NT_PPC_TM_CDSCR):
Define if not already defined.
* features/Makefile (WHICH): Add rs6000/powerpc-isa207-htm-vsx32l
and rs6000/powerpc-isa207-htm-vsx64l.
(XMLTOC): Add rs6000/powerpc-isa207-htm-vsx32l.xml and
rs6000/powerpc-isa207-htm-vsx64l.xml.
* features/rs6000/power-htm-spr.xml: New file.
* features/rs6000/power-htm-core.xml: New file.
* features/rs6000/power64-htm-core.xml: New file.
* features/rs6000/power-htm-fpu.xml: New file.
* features/rs6000/power-htm-altivec.xml: New file.
* features/rs6000/power-htm-vsx.xml: New file.
* features/rs6000/power-htm-ppr.xml: New file.
* features/rs6000/power-htm-dscr.xml: New file.
* features/rs6000/power-htm-tar.xml: New file.
* features/rs6000/powerpc-isa207-htm-vsx32l.xml: New file.
* features/rs6000/powerpc-isa207-htm-vsx64l.xml: New file.
* features/rs6000/powerpc-isa207-htm-vsx32l.c: Generate.
* features/rs6000/powerpc-isa207-htm-vsx64l.c: Generate.
* regformats/rs6000/powerpc-isa207-htm-vsx32l.dat: Generate.
* regformats/rs6000/powerpc-isa207-htm-vsx64l.dat: Generate.
* ppc-linux-nat.c (fetch_register, fetch_ppc_registers): Call
fetch_regset with HTM regsets.
(store_register, store_ppc_registers): Call store_regset with HTM
regsets.
(ppc_linux_nat_target::read_description): Set htm field in the
features struct if needed.
* ppc-linux-tdep.c: Include
features/rs6000/powerpc-isa207-htm-vsx32l.c and
features/rs6000/powerpc-isa207-htm-vsx64l.c.
(ppc32_regmap_tm_spr, ppc32_regmap_cgpr, ppc64_le_regmap_cgpr)
(ppc64_be_regmap_cgpr, ppc32_regmap_cfpr, ppc32_le_regmap_cvmx)
(ppc32_be_regmap_cvmx, ppc32_regmap_cvsx, ppc32_regmap_cppr)
(ppc32_regmap_cdscr, ppc32_regmap_ctar): New globals.
(ppc32_linux_tm_sprregset, ppc32_linux_cgprregset)
(ppc64_be_linux_cgprregset, ppc64_le_linux_cgprregset)
(ppc32_linux_cfprregset, ppc32_le_linux_cvmxregset)
(ppc32_be_linux_cvmxregset, ppc32_linux_cvsxregset)
(ppc32_linux_cpprregset, ppc32_linux_cdscrregset)
(ppc32_linux_ctarregset): New globals.
(ppc_linux_cgprregset, ppc_linux_cvmxregset): New functions.
(ppc_linux_collect_core_cpgrregset): New function.
(ppc_linux_iterate_over_regset_sections): Call back with the htm
regsets.
(ppc_linux_core_read_description): Check if the tm spr section is
present and set htm in the features struct.
(_initialize_ppc_linux_tdep): Call
initialize_tdesc_powerpc_isa207_htm_vsx32l and
initialize_tdesc_powerpc_isa207_htm_vsx64l.
* ppc-linux-tdep.h (ppc_linux_cgprregset, ppc_linux_cvmxregset):
Declare.
(ppc32_linux_tm_sprregset, ppc32_linux_cfprregset)
(ppc32_linux_cvsxregset, ppc32_linux_cpprregset)
(ppc32_linux_cdscrregset, ppc32_linux_ctarregset): Declare.
* ppc-tdep.h (struct gdbarch_tdep) <have_htm_spr, have_htm_core>:
New fields.
<have_htm_fpu, have_htm_altivec, have_htm_vsx>:
Likewise.
<ppc_cppr_regnum, ppc_cdscr_regnum, ppc_ctar_regnum>: Likewise.
<ppc_cdl0_regnum, ppc_cvsr0_regnum, ppc_cefpr0_regnum>: Likewise.
(enum) <PPC_TFHAR_REGNUM, PPC_TEXASR_REGNUM, PPC_TFIAR_REGNUM>:
New enum fields.
<PPC_CR0_REGNUM, PPC_CCR_REGNUM, PPC_CXER_REGNUM>: Likewise.
<PPC_CLR_REGNUM, PPC_CCTR_REGNUM, PPC_CF0_REGNUM>: Likewise.
<PPC_CFPSCR_REGNUM, PPC_CVR0_REGNUM, PPC_CVSCR_REGNUM>: Likewise.
<PPC_CVRSAVE_REGNUM, PPC_CVSR0_UPPER_REGNUM>: Likewise.
<PPC_CPPR_REGNUM, PPC_CDSCR_REGNUM>: Likewise.
<PPC_CTAR_REGNUM>: Likewise.
(PPC_IS_TMSPR_REGNUM, PPC_IS_CKPTGP_REGNUM, PPC_IS_CKPTFP_REGNUM)
(PPC_IS_CKPTVMX_REGNUM, PPC_IS_CKPTVSX_REGNUM): Define.
* rs6000-tdep.c (IS_CDFP_PSEUDOREG, IS_CVSX_PSEUDOREG)
(IS_CEFP_PSEUDOREG): Define.
(rs6000_register_name): Hide the upper halves of checkpointed VSX
registers. Return names for the checkpointed DFP, VSX, and EFP
pseudo registers.
(rs6000_pseudo_register_type): Remove initial assert and raise an
internal error in the else clause instead. Return types for the
checkpointed DFP, VSX, and EFP pseudo registers.
(dfp_pseudo_register_read, dfp_pseudo_register_write): Handle
checkpointed DFP pseudo registers.
(vsx_pseudo_register_read, vsx_pseudo_register_write): Handle
checkpointed VSX pseudo registers.
(efp_pseudo_register_read, efp_pseudo_register_write): Rename
from efpr_pseudo_register_read and
efpr_pseudo_register_write. Handle checkpointed EFP pseudo
registers.
(rs6000_pseudo_register_read, rs6000_pseudo_register_write):
Handle checkpointed DFP, VSX, and EFP registers.
(dfp_ax_pseudo_register_collect, vsx_ax_pseudo_register_collect)
(efp_ax_pseudo_register_collect): New functions.
(rs6000_ax_pseudo_register_collect): Move DFP, VSX and EFP pseudo
register logic to new functions. Handle checkpointed DFP, VSX,
and EFP pseudo registers.
(rs6000_gdbarch_init): Look for and validate the htm features.
Include checkpointed DFP, VSX and EFP pseudo-registers.
* NEWS: Mention access to PPR, DSCR, TAR, EBB/PMU registers and
HTM registers.
gdb/gdbserver/ChangeLog:
2018-10-26 Pedro Franco de Carvalho <pedromfc@linux.ibm.com>
* configure.srv (ipa_ppc_linux_regobj): Add
powerpc-isa207-htm-vsx32l-ipa.o and
powerpc-isa207-htm-vsx64l-ipa.o.
(powerpc*-*-linux*): Add powerpc-isa207-htm-vsx32l.o and
powerpc-isa207-htm-vsx64l.o to srv_regobj. Add
rs6000/power-htm-spr.xml, rs6000/power-htm-core.xml,
rs6000/power64-htm-core.xml, rs6000/power-htm-fpu.xml,
rs6000/power-htm-altivec.xml, rs6000/power-htm-vsx.xml,
rs6000/power-htm-ppr.xml, rs6000/power-htm-dscr.xml,
rs6000/power-htm-tar.xml, rs6000/powerpc-isa207-htm-vsx32l.xml,
and rs6000/powerpc-isa207-htm-vsx64l.xml to srv_xmlfiles.
* linux-ppc-tdesc-init.h (enum ppc_linux_tdesc)
<PPC_TDESC_ISA207_HTM_VSX>: New enum value.
(init_registers_powerpc_isa207_htm_vsx32l)
(init_registers_powerpc_isa207_htm_vsx64l): Declare.
* linux-ppc-low.c (ppc_fill_tm_sprregset, ppc_store_tm_sprregset)
(ppc_store_tm_cgprregset, ppc_store_tm_cfprregset)
(ppc_store_tm_cvrregset, ppc_store_tm_cvsxregset)
(ppc_store_tm_cpprregset, ppc_store_tm_cdscrregset)
(ppc_store_tm_ctarregset): New functions.
(ppc_regsets): Add entries for HTM regsets.
(ppc_arch_setup): Set htm in features struct when needed. Set
sizes for the HTM regsets.
(ppc_get_ipa_tdesc_idx): Return PPC_TDESC_ISA207_HTM_VSX.
(initialize_low_arch): Call
init_registers_powerpc_isa207_htm_vsx32l and
init_registers_powerpc_isa207_htm_vsx64l.
* linux-ppc-ipa.c (get_ipa_tdesc): Handle
PPC_TDESC_ISA207_HTM_VSX.
(initialize_low_tracepoint): Call
init_registers_powerpc_isa207_htm_vsx32l and
init_registers_powerpc_isa207_htm_vsx64l.
gdb/testsuite/ChangeLog:
2018-10-26 Pedro Franco de Carvalho <pedromfc@linux.ibm.com>
* gdb.arch/powerpc-htm-regs.c: New file.
* gdb.arch/powerpc-htm-regs.exp: New file.
gdb/doc/ChangeLog:
2018-10-26 Pedro Franco de Carvalho <pedromfc@linux.ibm.com>
* gdb.texinfo (PowerPC Features): Describe new features
"org.gnu.gdb.power.htm.spr", "org.gnu.gdb.power.htm.core",
"org.gnu.gdb.power.htm.fpu", "org.gnu.gdb.power.htm.altivec",
"org.gnu.gdb.power.htm.vsx", "org.gnu.gdb.power.htm.ppr",
"org.gnu.gdb.power.htm.dscr", "org.gnu.gdb.power.htm.tar".
This patch adds support for registers of the Event Based Branching and
Performance Monitoring Units for the powerpc linux native and core
file targets, and for the powerpc linux server stub.
All three EBB registers are accessible. Only a subset of the PMU
registers can be accessed through ptrace. Because of this, the PMU
registers are enumerated individually in gdbarch_tdep, as opposed to
having a single "have_pmu" flag. This is intended to make it easier
to add additional PMU registers in the future, since checking a
"have_pmu" flag elsewhere in the code would no longer be correct. The
tdesc feature is named org.gnu.gdb.power.linux.pmu because of this.
It's unclear if it makes sense to save and restore these registers
across function calls, since some of them can be modified
asynchronously. They are also not tracked in record-replay mode.
The kernel can return ENODATA when ptrace is used to get the EBB
registers, unless a linux performance event that uses EBB is open in
the inferior. For this reason, the "fill" functions in the server
stub for the ebb register sets is not implemented.
Since gdbserver writes all registers in one go before resuming the
inferior, this error would not be detected at the time the user tries
to write to one of the registers on the client side, and gdbserver
would print out warnings every time it resumes the inferior when no
ebb performance event is opened, so there is currently no
straightforward way to handle this case. This means the ebb registers
in the client-side regcache can become dirty when the user tries to
write to them, until the inferior is resumed and stopped again.
A related issue is that 'G' packets used to write to unrelated
registers will include bad data for the EBB registers if they are
unavailable, since no register status information is included in the
'G' packet. This data won't be written to the inferior by the
gdbserver stub because the "fill" functions are not implemented, and
currently the gdbserver stub doesn't change the status of the
registers in its own regcache in response to 'G' packets.
Another limitation for the ebb registers is that traceframes don't
record if registers are available or not, so if these registers are
collected when a tracepoint is hit and the inferior has no ebb event
opened, the user will see zero values for all of them, instead of the
usual <unavailable>.
Because these registers are often unavailable, trying to store them
with target_store_registers with -1 for the regno argument (all
registers) would almost always fail, so they are ignored in this case.
gdb/ChangeLog:
2018-10-26 Edjunior Barbosa Machado <emachado@linux.vnet.ibm.com>
Pedro Franco de Carvalho <pedromfc@linux.ibm.com>
* arch/ppc-linux-common.h (PPC_LINUX_SIZEOF_EBBREGSET)
(PPC_LINUX_SIZEOF_PMUREGSET): Declare.
* nat/ppc-linux.h (PPC_FEATURE2_EBB, NT_PPC_EBB, NT_PPC_PMU):
Define if not already defined.
* features/rs6000/power-ebb.xml: New file.
* features/rs6000/power-linux-pmu.xml: New file.
* features/rs6000/powerpc-isa207-vsx32l.xml: Include ebb and pmu
features.
* features/rs6000/powerpc-isa207-vsx64l.xml: Likewise.
* features/rs6000/powerpc-isa207-vsx32l.c: Re-generate.
* features/rs6000/powerpc-isa207-vsx64l.c: Re-generate.
* regformats/rs6000/powerpc-isa207-vsx32l.dat: Re-generate.
* regformats/rs6000/powerpc-isa207-vsx64l.dat: Re-generate.
* ppc-linux-nat.c (fetch_register, fetch_ppc_registers): Call
fetch_regset with ebb and pmu regsets.
(store_register, store_ppc_registers): Call store_regset with ebb
and pmu regsets.
(ppc_linux_nat_target::read_description): Set isa207 field in the
features struct if ebb and pmu are avaiable.
* ppc-linux-tdep.c (ppc32_regmap_ebb, ppc32_regmap_pmu)
(ppc32_linux_ebbregset, ppc32_linux_pmuregset): New globals.
(ppc_linux_iterate_over_regset_sections): Call back with the ebb
and pmu regsets.
(ppc_linux_core_read_description): Check if the pmu section is
present and set isa207 in the features struct.
* ppc-linux-tdep.h (ppc32_linux_ebbregset)
(ppc32_linux_pmuregset): Declare.
* ppc-tdep.h (struct gdbarch_tdep) <ppc_mmcr0_regnum>: New field.
<ppc_mmcr2_regnum, ppc_siar_regnum, ppc_sdar_regnum>: New fields.
<ppc_sier_regnum>: New field.
(enum): <PPC_BESCR_REGNUM, PPC_EBBHR_REGNUM, PPC_EBBRR_REGNUM>:
New enum values.
<PPC_MMCR0_REGNUM, PPC_MMCR2_REGNUM, PPC_SIAR_REGNUM>: New enum
values.
<PPC_SDAR_REGNUM, PPC_SIER_REGNUM>: New enum values.
(PPC_IS_EBB_REGNUM, PPC_IS_PMU_REGNUM): Define.
* rs6000-tdep.c (rs6000_gdbarch_init): Look for and validate the
ebb and pmu features.
gdb/gdbserver/ChangeLog:
2018-10-26 Pedro Franco de Carvalho <pedromfc@linux.ibm.com>
* configure.srv (powerpc*-*-linux*): Add rs6000/power-ebb.xml and
rs6000/power-linux-pmu.xml to srv_xmlfiles.
* linux-ppc-low.c (ppc_store_ebbregset, ppc_fill_pmuregset)
(ppc_store_pmuregset): New functions.
(ppc_regsets): Add entries for ebb and pmu regsets.
(ppc_arch_setup): Set isa207 in features struct if the ebb and
pmu regsets are available. Set sizes for these regsets.
gdb/doc/ChangeLog:
2018-10-26 Pedro Franco de Carvalho <pedromfc@linux.ibm.com>
* gdb.texinfo (PowerPC Features): Describe new features
"org.gnu.gdb.power.ebb" and "org.gnu.gdb.power.linux.pmu".
This patch adds support for the Target Address Register for powerpc
linux native and core file targets, and in the powerpc linux server
stub.
gdb/ChangeLog:
2018-10-26 Edjunior Barbosa Machado <emachado@linux.vnet.ibm.com>
Pedro Franco de Carvalho <pedromfc@linux.ibm.com>
* arch/ppc-linux-tdesc.h (tdesc_powerpc_isa207_vsx32l)
(tdesc_powerpc_isa207_vsx64l): Declare.
* arch/ppc-linux-common.h (PPC_LINUX_SIZEOF_TARREGSET): Define.
(struct ppc_linux_features) <isa207>: New field.
(ppc_linux_no_features): Add initializer for isa207 field.
* arch/ppc-linux-common.c (ppc_linux_match_description): Return
new tdescs.
* nat/ppc-linux.h (PPC_FEATURE2_ARCH_2_07, PPC_FEATURE2_TAR)
(NT_PPC_TAR): Define if not already defined.
* features/Makefile (WHICH): Add rs6000/powerpc-isa207-vsx32l and
rs6000/powerpc-isa207-vsx64l.
(XMLTOC): Add rs6000/powerpc-isa207-vsx32l.xml and
rs6000/powerpc-isa207-vsx64l.xml.
* features/rs6000/power-tar.xml: New file.
* features/rs6000/powerpc-isa207-vsx32l.xml: New file.
* features/rs6000/powerpc-isa207-vsx64l.xml: New file.
* features/rs6000/powerpc-isa207-vsx32l.c: Generate.
* features/rs6000/powerpc-isa207-vsx64l.c: Generate.
* regformats/rs6000/powerpc-isa207-vsx32l.dat: Generate.
* regformats/rs6000/powerpc-isa207-vsx64l.dat: Generate.
* ppc-linux-nat.c (fetch_register, fetch_ppc_registers): Call
fetch_regset with the TAR regset.
(store_register, store_ppc_registers): Call store_regset with the
TAR regset.
(ppc_linux_nat_target::read_description): Set isa207 field in the
features struct if needed.
* ppc-linux-tdep.c: Include
features/rs6000/powerpc-isa207-vsx32l.c and
features/rs6000/powerpc-isa207-vsx64l.c.
(ppc32_regmap_tar, ppc32_linux_tarregset): New globals.
(ppc_linux_iterate_over_regset_sections): Call back with the tar
regset.
(ppc_linux_core_read_description): Check if the tar section is
present and set isa207 in the features struct.
(_initialize_ppc_linux_tdep): Call
initialize_tdesc_powerpc_isa207_vsx32l and
initialize_tdesc_powerpc_isa207_vsx64l.
* ppc-linux-tdep.h (ppc32_linux_tarregset): Declare.
* ppc-tdep.h (gdbarch_tdep) <ppc_tar_regnum>: New field.
(enum) <PPC_TAR_REGNUM>: New enum value.
* rs6000-tdep.c (rs6000_gdbarch_init): Look for and validate tar
feature.
(ppc_process_record_op31): Record changes to TAR.
gdb/gdbserver/ChangeLog:
2018-10-26 Pedro Franco de Carvalho <pedromfc@linux.ibm.com>
* configure.srv (ipa_ppc_linux_regobj): Add
powerpc-isa207-vsx64l-ipa.o and powerpc-isa207-vsx32l-ipa.o.
(powerpc*-*-linux*): Add powerpc-isa207-vsx32l.o and
powerpc-isa207-vsx64l.o to srv_regobj, add rs6000/power-tar.xml,
rs6000/powerpc-isa207-vsx32l.xml, and
rs6000/powerpc-isa207-vsx64l.xml to srv_xmlfiles.
* linux-ppc-tdesc-init.h (enum ppc_linux_tdesc)
<PPC_TDESC_ISA207_VSX>: New enum value.
(init_registers_powerpc_isa207_vsx32l): Declare.
(init_registers_powerpc_isa207_vsx64l): Declare.
* linux-ppc-low.c (ppc_fill_tarregset): New function.
(ppc_store_tarregset): New function.
(ppc_regsets): Add entry for the TAR regset.
(ppc_arch_setup): Set isa207 in features struct when needed. Set
size for the TAR regsets.
(ppc_get_ipa_tdesc_idx): Return PPC_TDESC_ISA207_VSX.
(initialize_low_arch): Call init_registers_powerpc_isa207_vsx32l
and init_registers_powerpc_isa207_vsx64l.
* linux-ppc-ipa.c (get_ipa_tdesc): Handle PPC_TDESC_ISA207_VSX.
(initialize_low_tracepoint): Call
init_registers_powerpc_isa207_vsx32l and
init_registers_powerpc_isa207_vsx64l.
gdb/testsuite/ChangeLog:
2018-10-26 Pedro Franco de Carvalho <pedromfc@linux.ibm.com>
* gdb.arch/powerpc-tar.c: New file.
* gdb.arch/powerpc-tar.exp: New file.
gdb/doc/ChangeLog:
2018-10-26 Pedro Franco de Carvalho <pedromfc@linux.ibm.com>
* gdb.texinfo (PowerPC Features): Describe new feature
"org.gnu.gdb.power.tar".
This patch adds gdb support for the Program Priorty Register and the
Data Stream Control Register, for the powerpc linux native and core
file targets, and for the powerpc linux server stub.
gdb/ChangeLog:
2018-10-26 Edjunior Barbosa Machado <emachado@linux.vnet.ibm.com>
Pedro Franco de Carvalho <pedromfc@linux.ibm.com>
* arch/ppc-linux-tdesc.h (tdesc_powerpc_isa205_ppr_dscr_vsx32l)
(tdesc_powerpc_isa205_ppr_dscr_vsx64l): Declare.
* arch/ppc-linux-common.h (PPC_LINUX_SIZEOF_PPRREGSET)
(PPC_LINUX_SIZEOF_DSCRREGSET): Define.
(struct ppc_linux_features) <ppr_dscr>: New field.
(ppc_linux_no_features): Add initializer for ppr_dscr field.
* arch/ppc-linux-common.c (ppc_linux_match_description): Return
new tdescs.
* nat/ppc-linux.h (PPC_FEATURE2_DSCR, NT_PPC_PPR, NT_PPC_DSCR):
Define if not already defined.
* features/Makefile (WHICH): Add
rs6000/powerpc-isa205-ppr-dscr-vsx32l and
rs6000/powerpc-isa205-ppr-dscr-vsx64l.
(XMLTOC): Add rs6000/powerpc-isa205-ppr-dscr-vsx32l.xml and
rs6000/powerpc-isa205-ppr-dscr-vsx64l.xml.
* features/rs6000/power-dscr.xml: New file.
* features/rs6000/power-ppr.xml: New file.
* features/rs6000/powerpc-isa205-ppr-dscr-vsx32l.xml: New file.
* features/rs6000/powerpc-isa205-ppr-dscr-vsx64l.xml: New file.
* features/rs6000/powerpc-isa205-ppr-dscr-vsx32l.c: Generate.
* features/rs6000/powerpc-isa205-ppr-dscr-vsx64l.c: Generate.
* regformats/rs6000/powerpc-isa205-ppr-dscr-vsx32l.dat: Generate.
* regformats/rs6000/powerpc-isa205-ppr-dscr-vsx64l.dat: Generate.
* ppc-linux-nat.c: Include <sys/uio.h>.
(fetch_regset, store_regset, check_regset): New functions.
(fetch_register, fetch_ppc_registers): Call fetch_regset with
DSCR and PPR regsets.
(store_register, store_ppc_registers): Call store_regset with
DSCR and PPR regsets.
(ppc_linux_get_hwcap2): New function.
(ppc_linux_nat_target::read_description): Call
ppc_linux_get_hwcap2 and check_regset, set ppr_dscr field in the
features struct if needed.
* ppc-linux-tdep.c: Include
features/rs6000/powerpc-isa205-ppr-dscr-vsx32l.c and
features/rs6000/powerpc-isa205-ppr-dscr-vsx64l.c.
(ppc32_regmap_ppr, ppc32_regmap_dscr, ppc32_linux_pprregset)
(ppc32_linux_dscrregset): New globals.
(ppc_linux_iterate_over_regset_sections): Call back with the ppr
and dscr regsets.
(ppc_linux_core_read_description): Check if the ppr and dscr
sections are present and set ppr_dscr in the features struct.
(_initialize_ppc_linux_tdep): Call
initialize_tdesc_powerpc_isa205_ppr_dscr_vsx32l and
initialize_tdesc_powerpc_isa205_ppr_dscr_vsx64l.
* ppc-linux-tdep.h (ppc32_linux_pprregset)
(ppc32_linux_dscrregset): Declare.
* ppc-tdep.h (struct gdbarch_tdep) <ppc_ppr_regnum>: New field.
<ppc_dscr_regnum>: New field.
(enum) <PPC_PPR_REGNUM, PPC_DSCR_REGNUM>: New enum values.
* rs6000-tdep.c (rs6000_gdbarch_init): Look for and validate ppr
and dscr features.
(ppc_process_record_op31): Record changes to PPR and DSCR.
gdb/gdbserver/ChangeLog:
2018-10-26 Edjunior Barbosa Machado <emachado@linux.vnet.ibm.com>
Pedro Franco de Carvalho <pedromfc@linux.ibm.com>
* configure.srv (ipa_ppc_linux_regobj): Add
powerpc-isa205-ppr-dscr-vsx32l-ipa.o and
powerpc-isa205-ppr-dscr-vsx64l-ipa.o.
(powerpc*-*-linux*): Add powerpc-isa205-ppr-dscr-vsx32l.o and
powerpc-isa205-ppr-dscr-vsx64l.o to srv_regobj, add
rs6000/power-dscr.xml, rs6000/power-ppr.xml,
rs6000/powerpc-isa205-ppr-dscr-vsx32l.xml and
rs6000/powerpc-isa205-ppr-dscr-vsx64l.xml to srv_xmlfiles.
* linux-ppc-tdesc-init.h (enum ppc_linux_tdesc)
<PPC_TDESC_ISA205_PPR_DSCR_VSX>: New enum value.
(init_registers_powerpc_isa205_ppr_dscr_vsx32l)
(init_registers_powerpc_isa205_ppr_dscr_vsx64l): Declare.
* linux-ppc-low.c: Include "elf/common.h" and <sys/uio.h>.
(ppc_hwcap): Add comment.
(ppc_hwcap2): New global.
(ppc_check_regset, ppc_fill_pprregset, ppc_store_pprregset)
(ppc_fill_dscrregset, ppc_store_dscrregset): New functions.
(ppc_regsets): Add entries for the DSCR and PPR regsets.
(ppc_arch_setup): Get AT_HWCAP2. Set ppr_dscr in features struct
when needed. Set sizes for the the DSCR and PPR regsets.
(ppc_get_ipa_tdesc_idx): Return PPC_TDESC_ISA205_PPR_DSCR_VSX.
(initialize_low_arch): Call
init_registers_powerpc_isa205_ppr_dscr_vsx32l and
init_registers_powerpc_isa205_ppr_dscr_vsx64l.
* linux-ppc-ipa.c (get_ipa_tdesc): Handle
PPC_TDESC_ISA205_PPR_DSCR_VSX.
(initialize_low_tracepoint): Call
init_registers_powerpc_isa205_ppr_dscr_vsx32l and
init_registers_powerpc_isa205_ppr_dscr_vsx64l.
gdb/testsuite/ChangeLog:
2018-10-26 Pedro Franco de Carvalho <pedromfc@linux.ibm.com>
* gdb.arch/powerpc-ppr-dscr.c: New file.
* gdb.arch/powerpc-ppr-dscr.exp: New file.
gdb/doc/ChangeLog:
2018-10-26 Pedro Franco de Carvalho <pedromfc@linux.ibm.com>
* gdb.texinfo (PowerPC Features): Describe new features
"org.gnu.gdb.power.ppr" and "org.gnu.gdb.power.dscr".
Now that linux-tdep.c already zero-initializes the buffer used for
generating core file notes, there is no need to do this in the linux
collect functions for the vector regset. The memsets in gdbserver were
not useful to begin with.
gdb/ChangeLog:
2018-10-26 Pedro Franco de Carvalho <pedromfc@linux.ibm.com>
* ppc-linux-tdep.c (ppc_linux_collect_vrregset): Remove.
(ppc32_le_linux_vrregset, ppc32_be_linux_vrregset): Replace
ppc_linux_collect_vrregset by regcache_collect_regset.
gdb/gdbserver/ChangeLog:
2018-10-26 Pedro Franco de Carvalho <pedromfc@linux.ibm.com>
* linux-ppc-low.c (ppc_fill_vrregset): Remove memset calls.
When invoking gdbserver, if the COMM parameter takes the form "unix::/path/name"
then a local (unix) domain socket will be created with that name and gdbserver
will listen for connections on that.
gdb/
* NEWS: Mention new feature.
gdb/gdbserver/
* configure.ac (AC_CHECK_HEADERS): Add sys/un.h.
* configure: Regenerate.
* remote-utils.c (remote_prepare): Create a local socket if requested.
(remote_open): Don't attempt to open a file if it's a socket.
(handle_accept_event): Display the name of the socket on connection.
gdb/common/
* netstuff.c (parse_connection_spec)[prefixes]: New member for local domain sockets.
This is a follow-up of:
https://sourceware.org/ml/gdb-patches/2018-08/msg00347.html
Instead of going throttle and always enabling our selftests (even in
non-development builds), this patch is a bit more conservative and
introduces a configure option ("--enable-unit-tests") that allows the
user to choose whether she wants unit tests in the build or not. Note
that the current behaviour is retained: if no option is provided, GDB
will have selftests included in a development build, and will *not*
have selftests included in a non-development build.
The rationale for having this option is still the same: due to the
many racy testcases and random failures we see when running the GDB
testsuite, it is unfortunately not possible to perform a full test
when one is building a downstream package. As the Fedora GDB
maintainer and one of the Debian GDB uploaders, I feel like this
situation could be improved by, at least, executing our selftests
after the package has been built.
This patch introduces no regressions to our build.
OK?
gdb/ChangeLog:
2018-10-10 Sergio Durigan Junior <sergiodj@redhat.com>
Simon Marchi <simark@simark.ca>
* README (`configure' options): Add documentation for new
"--enable-unit-tests" option.
* acinclude.m4: Include "selftest.m4".
* configure: Regenerate.
* configure.ac: Use "GDB_AC_SELFTEST".
* maint.c (maintenance_selftest): Update message informing
that selftests have been disabled.
(maintenance_info_selftests): Likewise.
* selftest.m4: New file.
gdb/gdbserver/ChangeLog:
2018-10-10 Sergio Durigan Junior <sergiodj@redhat.com>
Simon Marchi <simark@simark.ca>
* acinclude.m4: Include "../selftest.m4".
* configure: Regenerate.
* configure.ac: Use "GDB_AC_SELFTEST".
* configure.srv: Use "$enable_unittests" instead of
"$development" when checking whether unit tests have been
enabled.
* server.c (captured_main): Update message informing that
selftests have been disabled.
gdb/testsuite/ChangeLog:
2018-10-10 Sergio Durigan Junior <sergiodj@redhat.com>
* gdb.gdb/unittest.exp: Update expected message informing that
selftests have been disabled.
* gdb.server/unittest.exp: Likewise.
squash! Add parameter to allow enabling/disabling selftests via configure
This fixes a few instances of shadowing in gdbserver. These are all
simple fixes.
gdb/gdbserver/ChangeLog
2018-10-04 Tom Tromey <tom@tromey.com>
* server.c (handle_status): Rename inner "thread".
(process_serial_event): Declare "res" in 'm' case.
* linux-low.c (last_thread_of_process_p, find_lwp_pid)
(iterate_over_lwps): Rename inner "thread".
(linux_qxfer_libraries_svr4): Rename inner "len".
* gdbthread.h (find_thread_in_random): Rename inner "thread".
This commit moves now-identical code from gdb/gdb_proc_service.h
and gdb/gdbserver/gdb_proc_service.h into the new shared file
gdb/common/gdb_proc_service.h.
gdb/ChangeLog:
* common/gdb_proc_service.h: New file, factored out from...
* gdb_proc_service.h: Moved common code to the above file.
* Makefile.in (HFILES_NO_SRCDIR): Add the above new file.
gdb/gdbserver/ChangeLog:
* gdb_proc_service.h: Moved common code to
common/gdb_proc_service.h.
This commit updates comments and whitespace in GDB's and gdbserver's
gdb_proc_service.h.
gdb/ChangeLog:
* gdb_proc_service.h: Whitespace change.
gdb/gdbserver/ChangeLog:
* gdb_proc_service.h: Synchronize comments and whitespace with
GDB's version of this file.
gdbserver's configure removes -Wmissing-prototypes from the warning
flags. However, this flag is only useful for C, so this deletion is
no longer needed.
gdb/gdbserver/ChangeLog
2018-09-25 Tom Tromey <tom@tromey.com>
* configure: Rebuild.
* configure.ac (WARN_CFLAGS): Don't remove -Wmissing-prototypes.
Tom mentioned this a while ago, as a way to give you a cheap sense of
progression in your build, as all object files will be built
alphabetically (including the directory part). I tried it and I think
it's nice.
gdb/ChangeLog:
* Makefile.in (LIBGDB_OBS): Sort COMMON_OBS.
gdb/gdbserver/ChangeLog:
* Makefile.in (gdbserver$(EXEEXT)): Sort OBS.
(gdbreplay$(EXEEXT)): Sort GDBREPLAY_OBS.
($(IPA_LIB)): Sort IPA_OBJS.
ADD_DEPS is defined nowhere, so I presume it's not useful. If I'm wrong
and this is actually used, there should be a comment explaining where it
comes from.
gdb/gdbserver/ChangeLog:
* Makefile.in: Remove references to $(ADD_DEPS).
This changes a couple of places in gdbserver to use the GNU style for
metasyntactic variables.
gdb/gdbserver/ChangeLog
2018-09-16 Tom Tromey <tom@tromey.com>
* remote-utils.c (remote_open): Use GNU style for metasyntactic
variables.
* gdbreplay.c (gdbreplay_usage): Use GNU style for metasyntactic
variables.
After looking into why the build failed for Simon but not for me, we
found that the underlying cause was due to how gcc treats
-Wformat-nonliteral. gcc requires -Wformat to be given first; but
warning.m4 was not doing this, so -Wformat-nonliteral was not being
used.
This patch changes warning.m4 to account gcc's requirement.
This then showed that the target-float.c build change in the earlier
Makefile patch was also incorrect. Simon didn't see this in his
build, but gcc now points it out. So, this patch fixes this problem
as well.
2018-09-05 Tom Tromey <tom@tromey.com>
* warning.m4 (AM_GDB_WARNINGS): Add -Wformat when testing
-Wformat-nonliteral.
* target-float.c (host_float_ops<T>::to_string)
(host_float_ops<T>::from_string): Use
DIAGNOSTIC_IGNORE_FORMAT_NONLITERAL.
* configure: Rebuild.
gdb/gdbserver/ChangeLog
2018-09-05 Tom Tromey <tom@tromey.com>
* configure: Rebuild.
The PR reports that building with -Wodr -flto complains about different
versions of struct ipa_sym_addresses, in common/agent.c and
gdbserver/tracepoint.c. This patch renames the version in common to
ipa_sym_addresses_common to avoid the name clash. Because the IPA_SYM
assumed the name ipa_sym_addresses, it now requires the includer to
define the IPA_SYM_STRUCT_NAME macro to define the name of the structure
holding the IPA symbol addresses.
gdb/ChangeLog:
PR build/23399
* common/agent.c (IPA_SYM_STRUCT_NAME): Define.
(struct ipa_sym_addresses): Rename to...
(struct ipa_sym_addresses_common): ... this.
* common/agent.h (IPA_SYM): Use IPA_SYM_STRUCT_NAME.
gdb/gdbserver/ChangeLog:
PR build/23399
* tracepoint.c (IPA_SYM_STRUCT_NAME): Define.
Commit
c12a508 ("Add client_state struct.")
inadvertently changed the default behavior of GDBserver wrt address
randomization. The old disable_randomization global variable was
initialized to 1, whereas the corresponding field in the client_state
structure is initialized to 0.
This fixes
make check TESTS="gdb.base/jit-simple.exp" RUNTESTFLAGS="--target_board=native-gdbserver"
make check TESTS="gdb.base/execl-update-breakpoints.exp" RUNTESTFLAGS="--target_board=native-gdbserver"
Note that the execl-update-breakpoints.exp would only fail on systems
where the toolchain emits position-independent executables by default
(otherwise the main executable position is never randomized, so the
value of disable_randomization didn't matter).
gdb/gdbserver/ChangeLog:
PR gdb/23374
PR gdb/23375
* server.h (struct client_state) <disable_randomization>:
Initialize to 1.
This adds -Wunused-variable to the build. This required a special
check in configure in order to work around a bug in GCC 4.9. Simon
ound the correct test to use, so I've added him to the ChangeLog.
gdb/ChangeLog
2018-07-22 Simon Marchi <simon.marchi@polymtl.ca>
Tom Tromey <tom@tromey.com>
* warning.m4 (AM_GDB_WARNINGS): Add -Wunused-variable and special
test for it.
* configure: Rebuild.
gdb/gdbserver/ChangeLog
2018-07-22 Tom Tromey <tom@tromey.com>
* configure: Rebuild.
This removes a few unused variables from gdbserver.
The x86-tdesc.h change is a bit unusual for this series. This file
was not defining the multiple-include guard symbol, so I've added that
here. Also, it is hard to determine when i386_expedite_regs will be
needed, so this patch simply marks it ATTRIBUTE_UNUSED.
gdb/gdbserver/ChangeLog
2018-07-22 Tom Tromey <tom@tromey.com>
* win32-low.c (win32_create_inferior): Remove unused variables.
* gdbreplay.c (remote_open): Remove unused variable.
* remote-utils.c (remote_prepare): Remove unused variable.
* x86-tdesc.h (X86_TDESC_H): Define.
(amd64_expedite_regs): Define conditionally.
(i386_expedite_regs): Mark ATTRIBUTE_UNUSED.
* linux-x86-tdesc.c (i386_tdescs): Move inside #if.
* remote-utils.c (readchar): Remove unused variable.
We start from a process_info pointer, pass down process->pid, and
then the target_kill implementations need to find the process from the
pid again. Pass the process_info pointer down directly instead.
gdb/gdbserver/ChangeLog:
2018-07-13 Pedro Alves <palves@redhat.com>
* linux-low.c (linux_kill): Change parameter to process_info
pointer instead of pid. Adjust.
* lynx-low.c (lynx_kill): Likewise.
* nto-low.c (nto_kill): Likewise.
* spu-low.c (spu_kill): Likewise.
* win32-low.c (win32_kill): Likewise.
* server.c (handle_v_kill, kill_inferior_callback)
(detach_or_kill_for_exit): Adjust.
* target.c (kill_inferior): Change parameter to process_info
pointer instead of pid. Adjust.
* target.h (struct target_ops) <kill>: Change parameter to
process_info pointer instead of pid. Adjust all implementations
and callers.
(kill_inferior): Likewise.
We start from a process_info pointer, pass down process->pid, and then
the target_detach and target_join implementations need to find the
process from the pid again. Pass the process_info pointer down
directly instead.
gdb/gdbserver/ChangeLog:
2018-07-13 Pedro Alves <palves@redhat.com>
* linux-low.c (linux_detach, linux_join): Change parameter to
process_info pointer instead of pid. Adjust.
* lynx-low.c (lynx_detach, lynx_join): Likewise.
* nto-low.c (nto_detach): Likewise.
* spu-low.c (spu_detach, spu_join): Likewise.
* win32-low.c (win32_detach, win32_join): Likewise.
* server.c (handle_detach, detach_or_kill_for_exit): Adjust.
* target.h (struct target_ops) <detach, join>: Change parameter to
process_info pointer instead of pid. Adjust all implementations
and callers.
(detach_inferior, join_inferior): Rename 'pid' parameter to
'proc'.
This patch implements IPv6 support for both GDB and gdbserver. Based
on my research, it is the fourth attempt to do that since 2006. Since
I used ideas from all of the previous patches, I also added their
authors's names on the ChangeLogs as a way to recognize their
efforts. For reference sake, you can find the previous attempts at:
https://sourceware.org/ml/gdb-patches/2006-09/msg00192.htmlhttps://sourceware.org/ml/gdb-patches/2014-02/msg00248.htmlhttps://sourceware.org/ml/gdb-patches/2016-02/msg00226.html
The basic idea behind the patch is to start using the new
'getaddrinfo'/'getnameinfo' calls, which are responsible for
translating names and addresses in a protocol-independent way. This
means that if we ever have a new version of the IP protocol, we won't
need to change the code again (or, at least, won't have to change the
majority of the code).
The function 'getaddrinfo' returns a linked list of possible addresses
to connect to. Dealing with multiple addresses proved to be a hard
task with the current TCP auto-retry mechanism implemented on
ser-tcp:net_open. For example, when gdbserver listened only on an
IPv4 socket:
$ ./gdbserver --once 127.0.0.1:1234 ./a.out
and GDB was instructed to try to connect to both IPv6 and IPv4
sockets:
$ ./gdb -ex 'target extended-remote localhost:1234' ./a.out
the user would notice a somewhat big delay before GDB was able to
connect to the IPv4 socket. This happened because GDB was trying to
connect to the IPv6 socket first, and had to wait until the connection
timed out before it tried to connect to the IPv4 socket.
For that reason, I had to rewrite the main loop and implement a new
method for handling multiple connections. After some discussion,
Pedro and I agreed on the following algorithm:
1) For each entry returned by 'getaddrinfo', we try to open a socket
and connect to it.
2.a) If we have a successful 'connect', we just use that connection.
2.b) If we don't have a successfull 'connect', but if we've got a
ECONNREFUSED (meaning the the connection was refused), we keep track
of this fact by using a flag.
2.c) If we don't have a successfull 'connect', but if we've got a
EINPROGRESS (meaning that the connection is in progress), we perform
a 'select' call on the socket until we have a result (either a
successful connection, or an error on the socket).
3) If tcp_auto_retry is true, and we haven't gotten a successful
connection, and at least one of our attempts failed with
ECONNREFUSED, then we wait a little bit (i.e., call
'wait_for_connect'), check to see if there was a
timeout/interruption (in which case we bail out), and then go back
to (1).
After multiple tests, I was able to connect without delay on the
scenario described above, and was also able to connect in all other
types of scenarios.
I also implemented some hostname parsing functions (along with their
corresponding unit tests) which are used to help GDB and gdbserver to
parse hostname strings provided by the user. These new functions are
living inside common/netstuff.[ch]. I've had to do that since IPv6
introduces a new URL scheme, which defines that square brackets can be
used to enclose the host part and differentiate it from the
port (e.g., "[::1]:1234" means "host ::1, port 1234"). I spent some
time thinking about a reasonable way to interpret what the user wants,
and I came up with the following:
- If the user has provided a prefix that doesn't specify the protocol
version (i.e., "tcp:" or "udp:"), or if the user has not provided
any prefix, don't make any assumptions (i.e., assume AF_UNSPEC when
dealing with 'getaddrinfo') *unless* the host starts with "[" (in
which case, assume it's an IPv6 host).
- If the user has provided a prefix that does specify the protocol
version (i.e., "tcp4:", "tcp6:", "udp4:" or "udp6:"), then respect
that.
This method doesn't follow strictly what RFC 2732 proposes (that
literal IPv6 addresses should be provided enclosed in "[" and "]")
because IPv6 addresses still can be provided without square brackets
in our case, but since we have prefixes to specify protocol versions I
think this is not an issue.
Another thing worth mentioning is the new 'GDB_TEST_SOCKETHOST'
testcase parameter, which makes it possible to specify the
hostname (without the port) to be used when testing GDB and
gdbserver. For example, to run IPv6 tests:
$ make check-gdb RUNTESTFLAGS='GDB_TEST_SOCKETHOST=tcp6:[::1]'
Or, to run IPv4 tests:
$ make check-gdb RUNTESTFLAGS='GDB_TEST_SOCKETHOST=tcp4:127.0.0.1'
This required a few changes on the gdbserver-base.exp, and also a
minimal adjustment on gdb.server/run-without-local-binary.exp.
Finally, I've implemented a new testcase,
gdb.server/server-connect.exp, which is supposed to run on the native
host and perform various "smoke tests" using different connection
methods.
This patch has been regression-tested on BuildBot and locally, and
also built using a x86_64-w64-mingw32 GCC, and no problems were found.
gdb/ChangeLog:
2018-07-11 Sergio Durigan Junior <sergiodj@redhat.com>
Jan Kratochvil <jan.kratochvil@redhat.com>
Paul Fertser <fercerpav@gmail.com>
Tsutomu Seki <sekiriki@gmail.com>
Pedro Alves <palves@redhat.com>
* Makefile.in (SUBDIR_UNITTESTS_SRCS): Add
'unittests/parse-connection-spec-selftests.c'.
(COMMON_SFILES): Add 'common/netstuff.c'.
(HFILES_NO_SRCDIR): Add 'common/netstuff.h'.
* NEWS (Changes since GDB 8.2): Mention IPv6 support.
* common/netstuff.c: New file.
* common/netstuff.h: New file.
* ser-tcp.c: Include 'netstuff.h' and 'wspiapi.h'.
(wait_for_connect): Update comment. New parameter
'gdb::optional<int> sock' instead of 'struct serial *scb'.
Use 'sock' directly instead of 'scb->fd'.
(try_connect): New function, with code from 'net_open'.
(net_open): Rewrite main loop to deal with multiple
sockets/addresses. Handle IPv6-style hostnames; implement
support for IPv6 connections.
* unittests/parse-connection-spec-selftests.c: New file.
gdb/gdbserver/ChangeLog:
2018-07-11 Sergio Durigan Junior <sergiodj@redhat.com>
Jan Kratochvil <jan.kratochvil@redhat.com>
Paul Fertser <fercerpav@gmail.com>
Tsutomu Seki <sekiriki@gmail.com>
* Makefile.in (SFILES): Add '$(srcdir)/common/netstuff.c'.
(OBS): Add 'common/netstuff.o'.
(GDBREPLAY_OBS): Likewise.
* gdbreplay.c: Include 'wspiapi.h' and 'netstuff.h'.
(remote_open): Implement support for IPv6
connections.
* remote-utils.c: Include 'netstuff.h', 'filestuff.h'
and 'wspiapi.h'.
(handle_accept_event): Accept connections from IPv6 sources.
(remote_prepare): Handle IPv6-style hostnames; implement
support for IPv6 connections.
(remote_open): Implement support for printing connections from
IPv6 sources.
gdb/testsuite/ChangeLog:
2018-07-11 Sergio Durigan Junior <sergiodj@redhat.com>
Jan Kratochvil <jan.kratochvil@redhat.com>
Paul Fertser <fercerpav@gmail.com>
Tsutomu Seki <sekiriki@gmail.com>
* README (Testsuite Parameters): Mention new 'GDB_TEST_SOCKETHOST'
parameter.
* boards/native-extended-gdbserver.exp: Do not set 'sockethost'
by default.
* boards/native-gdbserver.exp: Likewise.
* gdb.server/run-without-local-binary.exp: Improve regexp used
for detecting when a remote debugging connection succeeds.
* gdb.server/server-connect.exp: New file.
* lib/gdbserver-support.exp (gdbserver_default_get_comm_port):
Do not prefix the port number with ":".
(gdbserver_start): New global GDB_TEST_SOCKETHOST. Implement
support for detecting and using it. Add '$debughost_gdbserver'
to the list of arguments used to start gdbserver. Handle case
when gdbserver cannot resolve a network name.
gdb/doc/ChangeLog:
2018-07-11 Sergio Durigan Junior <sergiodj@redhat.com>
Jan Kratochvil <jan.kratochvil@redhat.com>
Paul Fertser <fercerpav@gmail.com>
Tsutomu Seki <sekiriki@gmail.com>
* gdb.texinfo (Remote Connection Commands): Add explanation
about new IPv6 support. Add new connection prefixes.
This fixes a gdb.base/multi-forks.exp regression with GDBserver.
Git commit f2ffa92bbc ("gdb: Eliminate the 'stop_pc' global") caused
the regression by exposing a latent bug in gdbserver.
The bug is that GDBserver's implementation of the D;PID packet
incorrectly assumes that the selected thread points to the process
being detached. This happens via the any_persistent_commands call,
which calls current_process:
(gdb) bt
#0 0x000000000040a57e in internal_error(char const*, int, char const*, ...)
(file=0x4a53c0 "src/gdb/gdbserver/inferiors.c", line=212, fmt=0x4a539e "%s:
Assertion `%s' failed.") at src/gdb/gdbserver/../common/errors.c:54
#1 0x0000000000420acf in current_process() () at
src/gdb/gdbserver/inferiors.c:212
#2 0x00000000004226a0 in any_persistent_commands() () at
gdb/gdbserver/mem-break.c:308
#3 0x000000000042cb43 in handle_detach(char*) (own_buf=0x6f0280 "D;62ea") at
src/gdb/gdbserver/server.c:1210
#4 0x0000000000433af3 in process_serial_event() () at
src/gdb/gdbserver/server.c:4055
#5 0x0000000000434878 in handle_serial_event(int, void*) (err=0,
client_data=0x0)
The "eliminate stop_pc" commit exposes the problem because before that
commit, GDB's switch_to_thread always read the newly-selected thread's
PC, and that would end up forcing GDBserver's selected thread to
change accordingly as side effect. After that commit, GDB no longer
reads the thread's PC, and GDBserver does not switch the thread.
Fix this by removing the assumption from GDBserver.
gdb/gdbserver/ChangeLog:
2018-07-11 Pedro Alves <palves@redhat.com>
PR gdb/23377
* mem-break.c (any_persistent_commands): Add process_info
parameter and use it instead of relying on the current process.
Change return type to bool.
* mem-break.h (any_persistent_commands): Add process_info
parameter and change return type to bool.
* server.c (handle_detach): Remove require_running_or_return call.
Look up the process_info for the process we're about to detach.
If not found, return back error to GDB. Adjust
any_persistent_commands call to pass down a process pointer.
Running gdbserver under Valgrind I get:
==26925== Conditional jump or move depends on uninitialised value(s)
==26925== at 0x473E7F: i387_cache_to_xsave(regcache*, void*) (i387-fp.c:579)
==26925== by 0x46E3ED: x86_fill_xstateregset(regcache*, void*) (linux-x86-low.c:418)
==26925== by 0x45E747: regsets_store_inferior_registers(regsets_info*, regcache*) (linux-low.c:5456)
==26925== by 0x45EEF8: linux_store_registers(regcache*, int) (linux-low.c:5731)
==26925== by 0x426441: regcache_invalidate_thread(thread_info*) (regcache.c:89)
==26925== by 0x45CCAF: linux_resume_one_lwp_throw(lwp_info*, int, int, siginfo_t*) (linux-low.c:4447)
==26925== by 0x45CE2A: linux_resume_one_lwp(lwp_info*, int, int, siginfo_t*) (linux-low.c:4519)
==26925== by 0x45E17C: proceed_one_lwp(thread_info*, lwp_info*) (linux-low.c:5216)
==26925== by 0x45DC81: linux_resume_one_thread(thread_info*, bool) (linux-low.c:5031)
==26925== by 0x45DD34: linux_resume(thread_resume*, unsigned long)::{lambda(thread_info*)#2}::operator()(thread_info*) const (linux-low.c:5095)
==26925== by 0x462907: void for_each_thread<linux_resume(thread_resume*, unsigned long)::{lambda(thread_info*)#2}>(linux_resume(thread_resume*, unsigned long)::{lambda(thread_info*)#2}) (gdbthread.h:150)
==26925== by 0x45DE62: linux_resume(thread_resume*, unsigned long) (linux-low.c:5093)
==26925==
==26925== Conditional jump or move depends on uninitialised value(s)
==26925== at 0x473EBD: i387_cache_to_xsave(regcache*, void*) (i387-fp.c:586)
==26925== by 0x46E3ED: x86_fill_xstateregset(regcache*, void*) (linux-x86-low.c:418)
==26925== by 0x45E747: regsets_store_inferior_registers(regsets_info*, regcache*) (linux-low.c:5456)
==26925== by 0x45EEF8: linux_store_registers(regcache*, int) (linux-low.c:5731)
==26925== by 0x426441: regcache_invalidate_thread(thread_info*) (regcache.c:89)
==26925== by 0x45CCAF: linux_resume_one_lwp_throw(lwp_info*, int, int, siginfo_t*) (linux-low.c:4447)
==26925== by 0x45CE2A: linux_resume_one_lwp(lwp_info*, int, int, siginfo_t*) (linux-low.c:4519)
==26925== by 0x45E17C: proceed_one_lwp(thread_info*, lwp_info*) (linux-low.c:5216)
==26925== by 0x45DC81: linux_resume_one_thread(thread_info*, bool) (linux-low.c:5031)
==26925== by 0x45DD34: linux_resume(thread_resume*, unsigned long)::{lambda(thread_info*)#2}::operator()(thread_info*) const (linux-low.c:5095)
==26925== by 0x462907: void for_each_thread<linux_resume(thread_resume*, unsigned long)::{lambda(thread_info*)#2}>(linux_resume(thread_resume*, unsigned long)::{lambda(thread_info*)#2}) (gdbthread.h:150)
==26925== by 0x45DE62: linux_resume(thread_resume*, unsigned long) (linux-low.c:5093)
The problem is a type/width mismatch in code like this, in
gdbserver/i387-fp.c:
/* Some registers are 16-bit. */
collect_register_by_name (regcache, "fctrl", &val);
fp->fctrl = val;
In the above code:
#1 - 'val' is a 64-bit unsigned long.
#2 - "fctrl" is 32-bit in the register cache, thus half of 'val' is
left uninitialized by collect_register_by_name, which works with
an untyped raw buffer output (i.e., void*).
#3 - fp->fctrl is an unsigned short (16-bit). For some such
registers we're masking off the uninitialized bits with 0xffff,
but not in all cases.
We end up in such a fragile situation because
collect_registers_by_name works with an untyped output buffer pointer,
making it easy to pass a pointer to a variable of the wrong size.
Fix this by using regcache_raw_get_unsigned instead (actually a new
regcache_raw_get_unsigned_by_name wrapper), which always returns a
zero-extended ULONGEST register value. It ends up simplifying the
i387-tdep.c code a bit, even.
gdb/gdbserver/ChangeLog:
2018-07-11 Pedro Alves <palves@redhat.com>
* i387-fp.c (i387_cache_to_fsave, cache_to_fxsave)
(i387_cache_to_xsave): Use regcache_raw_get_unsigned_by_name
instead of collect_register_by_name.
* regcache.c (regcache_raw_get_unsigned_by_name): New.
* regcache.h (regcache_raw_get_unsigned_by_name): New.
There's a buildroot where I want to debug a binary, and I tried to
connect to it from outside, but got very weird errors like
architecture mismatch or protocol errors. At last, after switching on
'--debug' for gdbserver I found a message 'Can't open /proc/pid/'
message and suddenly found that I forgot to mount procfs in my
buildroot.
Make discovering the problem easier by making GDB / GDBserver warn
(even without --debug) if /proc can not be accessed.
Native debugging:
(gdb) start
Temporary breakpoint 1 at 0x400835: file test.c, line 10.
Starting program: /tmp/test
warning: /proc is not accessible.
GDBserver/remote debugging:
$ ./gdbserver :9999 ./gdbserver
gdbserver: /proc is not accessible.
gdb/ChangeLog:
2018-07-04 Vyacheslav Barinov <v.barinov@samsung.com>
Pedro Alves <palves@redhat.com>
* linux-nat.c (linux_init_ptrace): Rename to ...
(linux_init_ptrace_procfs): ... this. Call
linux_proc_init_warnings.
(linux_nat_target::post_attach)
(linux_nat_target::post_startup_inferior): Adjust.
* nat/linux-procfs.c (linux_proc_init_warnings): Define function.
* nat/linux-procfs.h (linux_proc_init_warnings): Declare function.
gdb/gdbserver/ChangeLog:
2018-07-04 Vyacheslav Barinov <v.barinov@samsung.com>
Pedro Alves <palves@redhat.com>
* linux-low.c (initialize_low): Call linux_proc_init_warnings.
John Baldwin
Tom Tromey
Tom Tromey
Sergio Durigan Junior
Eli Zaretskii
Alan Hayward
Szabolcs Nagy
Joel Brobecker
Pedro Franco de Carvalho
Simon Marchi
Edjunior Barbosa Machado
John Darrington
Gary Benson
Simon Marchi
Pedro Alves
Vyacheslav Barinov