* i386-stub.c, m32r-stub.c, m68k-stub.c, sh-stub.c, sparc-stub.c,
sparcl-stub, sparclet-stub.c: Change declaration of putDebugChar
to include explicit void return type as per documentation. Fix up
occasions where stubs erroneously checked return type.
* gdbtk.c (gdbtk_init): Set the fputs_unfiltered_hook to
gdbtk_fputs BEFORE you eval script. The old code was setting it
to null until after you did this, but that is wrong, because it
will cause the output of CAUGHT errors to go to gdb_stderr, which
is wrong. You only want to write errors to the console if the
eval generates an error.
* srcwin.test (click): New function that generates an event
at a location.
(srcwin-4.4): New test. Simulate a click on a line and
check for breakpoint set.
(srcwin-4.5): New test. Right-click on a line and select "Continue
to Here" from popup.
* srcwin.exp: Source srcwin3.test, which will test source window
assembly debugging on executables built without "-g".
so-thresh.linkopts, so-thresh.mk: Move to gdb.hp from gdb.base
(shortening names from solib_threshold.exp etc), won't run on
anything but HP-UX for the foreseeable future.
* gdb.hp/Makefile.in, gdb.base/Makefile.in (clean): Adjust to
reflect move.
* gdbtk-cmds.c (gdb_get_breakpoint_info): When printing addresses,
do not rely on the format string "%lx" -- it does not exist for all
hosts. Use paddr instead.
(gdb_loadfile): Increase maximum line size to pass testsuite cases.
* gdbtk-hooks.c (gdbtk_add_hooks): Remove pc_changed_hook and
add register_changed_hook and memory_changed_hook.
(gdbtk_register_changed): New function.
(gdbtk_memory_changed): New function.
Changes from Keith Seitz <keiths@cygnus.com>
* valops.c (value_assign): Add calls to register_changed_hook and
memory_changed_hook to inform UIs that the user has changed
the target's registers/memory.
* findvar.c (write_register_gen): Remove call to pc_changed_hook.
* defs.h: Remove declaration for pc_changed_hook and
add declarations for register_changed_hook and
memory_changed_hook.
* top.c: Ditto.
* gdbtk.c (gdbtk_init): Create tcl warp_pointer command
for use with testing.
* gdbtk-cmds.c (gdb_loc): Fix for case where there are only
minimal symbols. Also make gdb_loc return the shared library
the location is in, if it is in one.
* tui.h: Include stdarg.h instead of varargs.h if we're on an ISO Cish
system.
Without this you'll get a build failure in gdbtk.c because it includes
stdarg.h but tui.h includes varargs.h; gdbtk.c tries to use va_start
and things die.
v850_register_names, v850_processor_type_table): Declare tables
and structures for handling differences in register names for
v850 and v850e.
(struct reg_list): Define new structure for creating tables
of register bit masks in v850e instrutions.
(handle_prepare, handle_pushm): New helpers for v850_scan_prologue.
(v850_scan_prologue): Recognize v850e instructions: callt, prepare,
and pushm.
(v850_target_architecture_hook): New function to set register
names based on current machine.
(_initialize_v850_tdep): Set up target_architecture_hook.
* config/v850/tm-v850.h (v850_register_names): Declare.
(REGISTER_NAME): Define to refer to v850_register_names.
(SR0_REGNUM, CTBP_REGNUM): Define.
(PS_REGNUM): Redefine in terms of SR0_REGNUM.
* Makefile.in (c-exp.tab.c): use BISON instead of YACC, to pick
the correct value from configure output.
(jv-exp.tab.c): ditto.
(f-exp.tab.c): ditto.
(m2-exp.tab.c): ditto.
* breakpoint.h (ep_is_exception_catchpoint): Add prototype.
* frame.h (select_and_print_frame): Add prototype.
* stack.c (func_command): Call select_and_print_frame with correct
number of arguments. Reformat whitespace.
As far as I can tell, the func command (only enabled in --dbx mode) doesn't
actually work right now, even with this rather glaring fix. I'm not going
to spend time on it; dbx mode looks pretty seriously broken after a five
second glance.
* remote-mips.c (mips_initialize): Fix parameters to clear_breakpoint.
(common_breakpoint): Restore support for instruction breakpoints
on non-LSI targets.
* top.c (init_main): Fix tipo in description of the remotetimeout
variable.
* breakpoint.c (bpstat_stop_status): Handle systems where
DECR_PC_AFTER_BREAK != DECR_PC_AFTER_HW_BREAK.
init only nonzero fields, leave to_require_attach and
to_require_detach empty, not needed for /proc systems yet.
(_initialize_procfs): Call init_procfs_ops.
* h8300-tdep.c (original_register_names, h8300h_register_names,
h8300_register_names): Define new variables.
(set_register_names): New function to set register names based on
current CPU type.
(h8300_command, h8300h_command, h8300s_command): Call
set_register_names.
* config/h8300/tm-h8300.h (h8300_register_names): Declare.
(REGISTER_NAME): Define to refer to h8300_register_names.
* acinclude.m4: New file, containing the hand-written local macro
definitions that used to be in aclocal.m4. Don't sinclude
../bfd/aclocal.m4 any more; running aclocal in this directory will
get us the definitions we need. HOWEVER: Do sinclude
../bfd/acinclude.m4, because we need the definition of
BFD_NEED_DECLARATION.
* aclocal.m4: Regenerated by aclocal.
* configure: Regenerated by autoconf.
(init_dummy_target): New function, fills in dummy_target.
(initialize_targets): Use it.
* hpux-thread.c (hpux_thread_ops): Don't initialize statically.
(init_hpux_thread_ops): New function, fills in hpux_thread_ops.
(_initialize_hpux_thread): Use it.
* m3-nat.c (m3_ops): Don't initialize statically.
(init_m3_ops): New function, fills in m3_ops.
(_initialize_m3): Use it.
* infrun.c (set/show scheduler-locking) New command. Set a
mode bit that will control how GDB attempts to control thread
scheduling for step, continue, etc. (resume): make use of
the schedule-locking mode.
* target.h (struct target_ops): new field to_has_thread_control.
* sol-thread.c: initialize target_ops to_has_thread_control.
* procfs.c: ditto.
* target.c: ditto.
* m3-nat.c: ditto.
* remote.c: ditto.
* hpux-thread.c: ditto.
* infrun.c (set/show scheduler-locking) New command. Set a
mode bit that will control how GDB attempts to control thread
scheduling for step, continue, etc. (resume): make use of
the schedule-locking mode.
* target.h (struct target_ops): new field to_has_thread_control.
* sol-thread.c: initialize target_ops to_has_thread_control.
* procfs.c: ditto.
* target.c: ditto.
* m3-nat.c: ditto.
* remote.c: ditto.
* hpux-thread.c: ditto.
* gdb.texinfo: Changes made as part of a project to merge in
changes made by HP. Documentation makes extensive use of
@ifclear HPPA and @ifset HPPA. The HP manual omits doumentation
on remote debugging. There are differences in documentation
(HP vs. non-HP) on C++ support (aCC vs. gnu gcc++). Also,
the HP manual discusses catchpoints, hardware watchpoints, and
some HPUX specific limitations for shared library support.
There are also a number of @node changes.
* gdbint.texinfo (Formatting): Disambiguate a sentence.
(C Usage): Same.
I am stupid, so I had trouble reading these two sentences.
Now I can read them, so I am happy.
* gdb.texinfo (Shell Commands): fixed messages about shell usage.
HP was insisting on C shell. Now all UNIX platforms have the
same message. removed @ifset HPPA and @ifclear HPPA
Tue Jan 12 17:00:00 1999 Edith Epstein <eepstein@sophia.cygnus.com>
* inftarg.c (child_create_inferior): fixed HPUXHPPA specific
call to fork_inferior. The shell param is now NULL.
to conform to standards, fix spelling errors.
(ishex, stubhex, record_currthread, etc): Declare.
(ishex, stubhex): Declare char arg as int.
(pack_string): Comment out, never used but possibly useful.
(threadref_to_int, remote_get_threadinfo, etc): Make static.
as part of a project to merge in changes made by HP.
all-cfg.texi -- set HPPA for HP PA-RISC targets.
refcard.tex -- change documentation about catch; removed info catch.
HPPA-cfg.texi -- new file; HPPA configuration for manual.
called from wait_for_inferior. Instead, if a new thread-id is
detected, call add_thread. (MAGIC_NULL_PID): new macro, use
instead of the magic number "42000". (remote_find_new_threads):
if inferior_pid is unknown, get and use the current thread id.
(remote_start_remote): on connecting, attempt to get the current
thread id for inferior_pid. (remote_resume): If pid == -1,
then resume any-thread (not the current thread specifically).
* thread.c (info_threads_command): don't initialize current_pid
until after call to FIND_NEW_THREADS (which may change inferior_pid).
scope.exp, langs.exp, list.exp -- compile one file at a time, then link.
default.exp -- change expected messages for catch and info catch tests to
reflect hp merge changes.
to delete on clean.
(EXECUTABLES): update to reflect new additions.
* gdb.base/commands.exp: update message expected.
* gdb.base/default.exp: add copyright notice.
* gdb.base/funcargs.exp (timeout): if hpux, increase timeout.
* gdb.base/help.exp: update messages to reflect current text.
* gdb.base/recurse.exp: add hpppa*-*-bsd* to 'list' of enabled
targets for recurse tests.
* gdb.base/watchpoint.exp: if on hpux and not gcc compiled, then
skip this file.
Stan Shebs
Jim Blandy
Brendan Kehoe
Jim Ingham
Martin Hunt
Elena Zannoni
Edith Epstein
Keith Seitz
Mark Alexander
Jason Molenda
Andrew Cagney
Fernando Nasser
Jeff Law
Felix Lee
David Taylor
Christopher Faylor
Zdenek Radouch
Michael Snyder
Stu Grossman