(i[3456]86-*-netbsd*): ...this. Set gdb_target to nbsd.
(i[3456]86-*-openbsd*): Make this a separate entry. Add a
comment noting that this needs its own target configuration.
* config/i386/nbsd.mt: New file.
* config/i386/nbsdaout.mt: Remove.
* config/i386/nbsdelf.mt: Ditto.
* config/i386/tm-nbsdaout.h: Ditto.
$(i386_tdep_h), and nbsd-tdep.h to dependency list.
* i386-tdep.h (i386bsd_init_abi): New prototype.
* i386bsd-tdep.c (i386bsd_init_abi): Remove "static" from
function declaration.
(_initialize_i386bsd_tdep): Don't register OS ABI handlers
for NetBSD-a.out or NetBSD-ELF.
(i386nbsd_sigtramp_start, i386nbsd_sigtramp_end)
(i386nbsd_sc_pc_offset, i386nbsd_sc_sp_offset)
(i386nbsd_init_abi, i386nbsdelf_init_abi): Move to...
* i386nbsd-tdep.c: ...here. Include arch-utils.h, i386-tdep.h,
and nbsd-tdep.h.
(i386nbsd_pc_in_sigtramp): New function.
(i386nbsd_init_abi): Set gdbarch_pc_in_sigtramp to
i386nbsd_pc_in_sigtramp.
(_initialize_i386nbsd_tdep): Register i386nbsd_init_abi
and i386nbsdelf_init_abi OS ABI handlers.
* config/i386/nbsdaout.mt (TDEPFILES): Add nbsd-tdep.o.
* config/i386/nbsdelf.mt (TDEPFILES): Likewise.
status line.
(tuiShowLocatorContent): Use it instead of displayableWinContentAt.
* tuiData.h (PROC_PREFIX): Use "In:" to reduce length of prefix.
(PC_PREFIX): Use upper case.
(SINGLE_KEY, MIN_LINE_WIDTH, MIN_PROC_WIDTH): Define.
(MAX_TARGET_WIDTH, MAX_PID_WIDTH): Define.
list.
* alphanbsd-tdep.c (alphanbsd_sigcontext_addr)
(alphanbsd_skip_sigtramp_frame): New functions.
(alphanbsd_init_abi): Set tdep->skip_sigtramp_frame to
alphanbsd_skip_sigtramp_frame. Set tdep->sigcontext_addr
to alphanbsd_sigcontext_addr.
list.
(nbsd-tdep.o): Add $(gdb_string_h) to dependency list.
* alphanbsd-tdep.c (alphanbsd_pc_in_sigtramp): Use
nbsd_pc_in_sigtramp.
* mipsnbsd-tdep.c: Include nbsd-tdep.h.
(mipsnbsd_pc_in_sigtramp): Use nbsd_pc_in_sigtramp.
* nbsd-tdep.c: Include gdb_string.h.
(nbsd_pc_in_sigtramp): New function.
* nbsd-tdep.h (nbsd_pc_in_sigtramp): New prototype.
* ppcnbsd-tdep.c (ppcnbsd_pc_in_sigtramp): New function.
(ppcnbsd_init_abi): Set gdbarch_pc_in_sigtramp to
ppcnbsd_pc_in_sigtramp.
* shnbsd-tdep.c (shnbsd_pc_in_sigtramp): New function.
(shnbsd_init_abi): Set gdbarch_pc_in_sigtramp to
shnbsd_pc_in_sigtramp.
* sparcnbsd-tdep.c (sparcnbsd_init_abi_elf): Set
gdbarch_pc_in_sigtramp to nbsd_pc_in_sigtramp.
* config/mips/nbsd.mt (TDEPFILES): Add nbsd-tdep.o.
* tui.c (tui_commands): Table of single key commands.
(tui_rl_command_key): New function to execute gdb command.
(tui_rl_command_mode): New function to temporarily leave SingleKey.
(tui_rl_next_keymap): New function to enter/leave the SingleKey mode.
(tui_rl_startup_hook): New function to avoid prompt display by
readline functions.
(tui_set_key_mode): New function to set the key mode and install
the readline keymap.
(tui_initialize_readline): Create TUI SingleKey readline map.
(tui_enable): Install rl_startup_hook.
(tui_disable): Remove it.
* tui.h (enum tui_key_mode): Declare.
(tui_set_key_mode, tui_current_key_mode): Declare.
* tuiIO.c (tui_redisplay_readline): Don't display the prompt in
SingleKey mode.
* tuiIO.h (tui_redisplay_readline): Declare.
(tui_update_breakpoint_info): Declare.
(tuiSetHasBreakAt, tuiAllSetHasBreakAt): Remove.
* tuiSourceWin.c (tuiUpdateSourceWindowAsIs): Update breakpoint
information using tui_update_breakpoint_info.
(tui_update_all_breakpoint_info): New function to refresh all
execution windows.
(tui_update_breakpoint_info): New function to recompute the status
of exec info window from breakpoints.
(tuiSetHasBreakAt, tuiAllSetHasBreakAt): Remove.
(tuiSetExecInfoContent): Use the exec info flags computed by
tui_update_breakpoint_info to display a short status about breakpoints.
* tuiData.h (TuiExecInfoContent): New for exec info string.
(TuiWhichElement): Use it.
(TUI_BP_ENABLED, TUI_BP_DISABLED, TUI_BP_HIT): New defines.
(TUI_BP_CONDITIONAL, TUI_BP_HARDWARE): New defines.
(TUI_BP_HIT_POS, TUI_BP_BREAK_POS, TUI_EXEC_POS): Likewise.
(TUI_EXECINFO_SIZE): Likewise.
* tuiData.c (initContentElement): Clear exec info string.
* tui-hooks.c (get_breakpoint): Remove.
(tui_event_create_breakpoint): Call tui_update_all_breakpoint_info.
(tui_event_delete_breakpoint): Likewise.
(tui_event_modify_breakpoint): Likewise.
minimal symbol of an appropriate name and use its address to
select a symtab to read and search, use `name' (as passed to us)
as the demangled name when searching the symtab's global and
static blocks, not the minsym's name.
the new PID.
(unstopped_p, linux_signal_pid): Remove.
(linux_target_ops): Remove linux_signal_pid.
* remote-utils.c (putpkt, input_interrupt): Use signal_pid
global instead of target method.
* target.h (struct target_ops): Remove signal_pid. Update comment
for create_inferior.
* server.c (signal_pid): New variable.
(create_inferior): Set signal_pid. Block SIGTTOU and SIGTTIN in
gdbserver. Set the child to be the foreground process group.
(attach_inferior): Set signal_pid.
events.
(select_frame_command): Send selected-frame-level-changed
event notification, but only if the level actually changed.
(up_silently_base): Add selected-frame-level-changed event
notification.
(down_silently_base): Likewise.
several lines in a buffer.
(tui_find_disassembly_address): New function to search backward
or forward a disassembly line.
(tuiSetDisassemContent): Use tui_disassemble to obtain the real
content and format it in the window.
(tuiShowDisassemAndUpdateSource): Remove unused locals.
(tuiVerticalDisassemScroll): Use tui_find_disassembly_address to
obtain the address to disassemble for the scrolling.
* tuiDisassem.h (tuiGetBeginAsmAddress): Update.
* tuiSourceWin.c (tuiUpdateSourceWindowAsIs): Don't pass symtab.
* cli/cli-script.c (copy_command_lines): New function.
* defs.h (copy_command_lines): Export.
* testsuite/gdb.base/commands.exp: New tests for commands
attached to a temporary breakpoint, and for commands that
delete the breakpoint they are attached to.
2002-08-26 Michael Snyder <msnyder@redhat.com>
* breakpoint.c (bpstat_stop_status): Instead of copying the
pointer to the breakpoint commands struct, make a new copy
of the struct and point to that.
(bpstat_clear): Free the commands struct.
(bpstat_clear_actions): Free the commands struct.
(bpstat_do_actions): Free the command actions. Also execute
the local cleanups, instead of deleting them.
(delete_breakpoint): Leave the commands field of the bpstat
chain alone -- it will be freed later.
* regcache.h (register_offset_hack): Declare.
(regcache_cooked_read_using_offset_hack): Declare.
(regcache_cooked_write_using_offset_hack): Declare.
* regcache.c (register_offset_hack): New function.
(regcache_cooked_read_using_offset_hack): New function.
(regcache_cooked_write_using_offset_hack): New function.
(regcache_dump): Check that the registers, according to their
offset, are packed hard against each other.
(cooked_xfer_using_offset_hack): New function.
(tuiUpdateLocatorInfoFromFrame): Remove.
(tui_set_locator_info): Allocate the content buffer if necessary.
(tui_set_locator_filename): Call tui_set_locator_info directly.
(tuiShowFrameInfo): Likewise and use find_pc_line instead of
find_pc_symtab.
* regcache.c (struct regcache_descr): Add field register_type.
(init_legacy_regcache_descr): Pass a pre-allocated regcache_descr
in as a parameter
(init_regcache_descr): Initialize register_type. Pass the descr
to init_legacy_regcache_descr. Use register_type instead of
REGISTER_VIRTUAL_TYPE.
(register_type): New function.
(regcache_dump): Replace REGISTER_VIRTUAL_TYPE with register_type.
* regcache.h (register_type): Declare.
* rs6000-tdep.c (rs6000_gdbarch_init): Set store_struct_return
instead of deprecated_store_return_value. Fix fallout from
2002-08-23 Andrew Cagney <cagney@redhat.com>.
* regcache.c (max_register_size): New function.
(init_legacy_regcache_descr): Ensure that max_register_size is
large enough for REGISTER_VIRTUAL_SIZE.
* regcache.h (max_register_size): Declare.
* Makefile.in (clean): Move to end of file.
(distclean, maintainer-clean, realclean): Ditto.
(mostlyclean): Move rule to end of file. Use GDB_TEX_TMPS,
GDBINT_TEX_TMPS, STABS_TEX_TMPS.
(gdb.dvi, gdb.pdf): Do not cleanup TeX temp files after texi2dvi.
(gdbint.dvi, gdbint.pdf, stabs.dvi, stabs.pdf): Ditto.
* rs6000-tdep.c (rs6000_gdbarch_init): Use deprecated version of
store_return_value.
(e500_extract_return_value): Change type of valbuf pointer to
void.
tuiUpdateLocatorFilename.
* tuiStack.c (tuiSetLocatorInfo): Make it static.
(tuiSetLocatorContent): Likewise.
(tuiUpdateLocatorInfoFromFrame): Likewise.
(tuiSwitchFilename): Remove.
(tui_set_locator_filename): New function
(tui_set_locator_info): Rename from tuiSetLocatorInfo to GNU-ify;
use tui_set_locator_filename to record the filename.
(tuiUpdateLocatorFilename): Likewise.
(tuiUpdateLocatorInfoFromFrame): Update.
(tuiSetLocatorContent): Likewise.
* tuiStack.h (tuiClearLocatorContent): Don't declare.
(tuiSetLocatorInfo, tuiSetLocatorContent): Likewise.
(tuiUpdateLocatorInfoFromFrame, tuiSwitchFilename): Likewise.
* tuiStack.c (tuiClearLocatorDisplay): Remove.
(tuiShowLocatorContent): Use wclrtoeol to clear end of status line.
(tuiUpdateLocatorDisplay): Don't call tuiClearLocatorDisplay.
is the size of command window.
(tuiResizeAll): Call it instead of init_page_info.
* tui.c (tui_enable): Call it to resize to TUI command window.
(tui_disable): Likewise for plain screen.
when breakpoints fail. Move general breakpoint error messages to
insert_breakpoints.
* breakpoint.c (insert_breakpoints): Change warnings when
breakpoints are nto inserted to specify the type. Remove call to
memory_error when hardware breakpoints can't be inserted. Remove
multiple calls to warning so all messages are sent to the user at
once.
(delete_breakpoints): Make insert error messsages more explicit.
(i386_svr4_init_abi): Set in_solib_call_trampoline and
skip_trampoline_code.
* config/i386/tm-i386v4.h: Don't include "config/tm-sysv4.h".
(CPLUS_MARKER): Define to '.'.
member.
(linux_corefile_thread_callback): Increase args->num_notes.
(linux_make_note_section): Initialize thread_args.num_notes, and
use it to determine whether notes for any threads were created.
corresponding macro is not defined. Likewise for PCNICE, PCSHOLD
and PCUNKILL.
(write_with_trace): Conditionalize out the switch branch handling
PCSHOLD if the corresponding macro is not defined. Likewise for
PRSABORT and PRSTOP.
This change will be needed by the Interix port.
* rs6000-tdep.c (struct rs6000_framedata): Add saved_ev and
ev_offset fields.
(skip_prologue): Add support for BookE/e500 instructions.
(e500_extract_return_value): New function.
(frame_get_saved_regs): Add support for saving ev registers and
pseudo gpr's.
(e500_store_return_value): New function.
(rs6000_gdbarch_init): Move up default intializations of
deprecated_extract_return_value and store_return_value. Overwrite
init of store_return_value with e500 specific version.
Set extract_return_value for e500.
number table from disk if the image file doesn't have a symbol
table; we'll never actually look at the info anyway, and Windows
ships DLL's with bogus file offsets for the line number data.
* mips-tdep.c (MSYMBOL_IS_SPECIAL, MSYMBOL_SIZE): These are only
used locally, so move them from the target machine header to here.
(mips_set_processor_type, mips_register_name, mips32_next_pc,
mips16_next_pc, cached_proc_desc, mips_set_processor_type):
Make static.
* config/mips/tm-mips.h (MSYMBOL_IS_SPECIAL, MSYMBOL_SIZE): Delete.
* ppc-tdep.h (struct gdbarch_tdep): Add ev registers.
* rs6000-tdep.c (rs6000_register_virtual_type): Return 64 bit
vector type for ev registers.
(e500_pseudo_register_read): New function.
(e500_pseudo_register_write): New function.
(e500_dwarf2_reg_to_regnum): New function.
(PPC_UISA_NOFP_SPRS): New macro.
(PPC_EV_REGS): New macro.
(PPC_GPRS_PSEUDO_REGS): New macro.
(registers_e500): New register set for e500.
(variants): Add e500 variant.
(rs6000_gdbarch_init): Move setting of pc, sp, fp regnums to
before setting architectural dependent variations. Initialize ev
registers numbers. Add case for e500 architecture. Set the
number of pseudo registers.
* config/mips/tm-mips.h (STORE_STRUCT_RETURN): Delete.
(EXTRACT_STRUCT_VALUE_ADDRESS): Delete.
* mips-tdep.c (mips_store_struct_return): New function.
(mips_extract_struct_value_address): New function.
(mips_gdbarch_init): Set store_struct_return and
extract_struct_value_address.
* config/mips/tm-mips.h (STORE_STRUCT_RETURN): Delete.
(EXTRACT_STRUCT_VALUE_ADDRESS): Delete.
* mips-tdep.c (mips_store_struct_return): New function.
(mips_extract_struct_value_address): New function.
(mips_gdbarch_init): Set store_struct_return and
extract_struct_value_address.
* dwarf2read.c (dwarf2_build_psymtabs): Check that
dwarf_line_offset is nonzero before creating dwarf_line_buffer.
(read_file_scope): Check that line_header is nonzero before
decoding macro information.
* infcmd.c (do_registers_info): Print vector registers in hex
format only.
(print_vector_info): Check that printing registers
makes sense.
(print_float_info): Ditto.
* mips-tdep.c (mips_gdbarch_init): Update.
(mips_o32_extract_return_value): Rewrite.
(mips_o32_store_return_value): Rewrite.
(mips_o32_xfer_return_value): New function.
(mips_xfer_register): Tweak debug print message. Allow for
buf_offset when dumping the value transfered.
* rs6000-tdep.c (struct reg): Add field to indicate a pseudo
register.
(P): New macro to define a register as a pseudo register.
(R, R4, R8, R16, FR32, R64, R0): Updated.
(struct variant): Add new fields for number of pseudo registers
and number of total registers.
(tot_num_registers): New macro replacing....
(num_registers): ...deleted macro.
(num_registers): New function.
(num_pseudo_registers): New function.
(variants): Update all variants to intialize new fields correctly.
Postpone initialization of number of pseudo regs and real regs.
(init_variants): New function.
(rs6000_gdbarch_init): Initialize variants. Update calculation of
registers offsets.
* valops.c (search_struct_field): Change error message to treat
return value of 0 from value_static_field as meaning that field is
optimized out.
(value_struct_elt_for_reference): Ditto.
* values.c (value_static_field): Treat an unresolved location the
same as a nonexistent symbol. Fix PR gdb/635.
* mips-tdep.c (mips_xfer_register): New function.
(mips_n32n64_extract_return_value): Rewrite.
(mips_gdbarch_init): For N32 and N64, set extract_return_value
instead of deprecated_extract_return_value.
conditionally.
(JB_PC, JB_ELEMENT_SIZE): Rename to MIPS_LINUX_JB_PC and
MIPS_LINUX_JB_ELEMENT_SIZE.
* mips-linux-tdep.c (supply_gregset, fill_gregset): Use alloca
for MAX_REGISTER_RAW_SIZE arrays.
(mips_linux_get_longjmp_target): Use MIPS_LINUX_JB_PC and
MIPS_LINUX_JB_ELEMENT_SIZE.
(TM_FILE): Set to tm-i386.h.
* config/i386/i386v.mt (TM_FILE): Set to tm-i386.h.
* config/i386/tm-i386v.h: Remove file.
* config/i386/tm-ptx.h [!SEQUENT_PTX4]: Include "i386/tm-i386.h"
instead of "i386/tm-i386v.h".
(START_INFERIOR_TRAPS_EXPECTED): Remove define.
* config/i386/tm-symmetry: Include "i386/tm-i386.h" instead of
"i386/tm-i386v.h".
(START_INFERIOR_TRAPS_EXPECTED): Remove define.
* config/i386/tm-vxworks.h: Include "i386/tm-i386.h" instead of
"i386/tm-i386.h".
multiple-inclusion.
(i386_register_u_addr): Remove prototype.
(register_u_addr): New prototype.
(REGISTER_U_ADDR): Redefine accordingly.
* i386v-nat.c: Improve several comments.
(i386_register_u_addr): Change signature and rename to
register_u_addr. Use FP_REGNUM_P. Rewrite slightly to get rid of
ubase variable.
* ada-lang.h: run through gdb_indent.sh
* ada-tasks.c: run through gdb_indent.sh
* ada-typeprint.c: run through gdb_indent.sh
* ada-valprint.c: run through gdb_indent.sh
* config/ia64/ia64.mt: New file.
* config/alpha/alpha.mt: New file.
* MAINTAINERS: Change the alpha target to alpha-elf and IA-64 to
ia64-linux-gnu. Mention that ia64-elf is broken.
* configure.tgt: Add alpha*-*-* and ia64*-*-* patterns.
* config/ia64/ia64.mt: New file.
* config/alpha/alpha.mt: New file.
* MAINTAINERS: Change the alpha target to alpha-elf and IA-64 to
ia64-linux-gnu. Mention that ia64-elf is broken.
* configure.tgt: Add alpha*-*-* and ia64*-*-* patterns.
procfs appears to be broken when debugging on multi-processor
machines. So enable software single stepping in order to avoid
using the procfs interface to do next/step operations, using
internal breakpoints instead.
* infrun.c (handle_inferior_event): Readjust the stop_pc by
DECR_PC_AFTER_BREAK when hitting a single step breakpoint, to
make this pc address equal to the value it would have if the
system stepping capability was used. Also set a new flag used
to ensure that we don't readjust the PC one more time later.
* breakpoint.c (bpstat_stop_status): Do not adjust the PC
address by DECR_PC_AFTER_BREAK when software single step is
in use for this architecture, as this has already been taken
care of in handle_inferior_event().
* Makefile.in (copying.o): Separate out compile rule.
(hpux-thread.o, procfs.o, signals.o): Ditto.
(v850ice.o, z8k-tdep.o): Ditto.
(tui-file.o): Move to TUI section.
(xdr_ptrace.o, xdr_rdb.o, xdr_ld.o): Move to separate section.
(nindy.o, Onindy.o, ttyflush.o): Move to separate section.
signal, check whether we hit a breakpoint before checking for a
single step breakpoint. Otherwise, GDB fails to notice that a
breakpoint has been hit when stepping onto a breakpoint.
* config/mips/tm-mips.h (FUNCTION_START_OFFSET, IN_SIGTRAMP,
REGISTER_VIRTUAL_SIZE): Delete.
(REGISTER_CONVERT_FROM_TYPE, REGISTER_CONVERT_TO_TYPE): Convert
from macros to functions.
* mips-tdep.c (mips_register_convert_from_type,
mips_register_convert_to_type): New functions.
(mips_gdbarch_init): Set up function_start_offset,
register_virtual_size, pc_in_sigtramp.
* config/mips/tm-mips.h (REGISTER_CONVERT_TO_VIRTUAL,
REGISTER_CONVERT_TO_RAW, REGISTER_CONVERTIBLE,
MAX_REGISTER_RAW_SIZE, MAX_REGISTER_VIRTUAL_SIZE): Delete.
* mips-tdep.c (mips_gdbarch_init): Set the above in the gdbarch.
(mips_register_convertible, mips_register_convert_to_virtual,
mips_register_convert_to_raw): Make static.
* config/i386/nm-i386gnu.h: New file.
(THREAD_STATE_FLAVOR, THREAD_STATE_SIZE,
THREAD_STATE_SET_TRACED, THREAD_STATE_CLEAR_STATE, ATTACH_DETACH):
Moved here from ...
* config/i386/tm-i386gnu.h: ... here. Removed.
* config/i386/xm-i386gnu.h: Removed.
* config/i386/i386gnu.mh (XM_FILE): Set to xm-i386.h.
(NAT_FILE): Set to nm-i386gnu.h.
* config/i386/i386gnu.mt (TDEPFILES): Add i386gnu-tdep.o.
* i386-tdep.c: New file.
* Makefile.in (ALLDEPFILES): Add i386gnu-nat.c and i386gnu-tdep.c.
(i386gnu-tdep.o): Specify dependencies.
"i386/tm-i386.h", "i386/tm-i386v.h" and "config/tm-sysv.h".
Adjust a few comments to reflect reality a bit closer.
(KERNEL_U_SIZE, TARGET_HAS_HARDWARE_WATCHPOINTS,
TARGET_CAN_USE_HARDWARE_WATCHPOINT, HAVE_CONTINUEABLE_WATCHPOINT,
HAVE_STEPPABLE_WATCHPOINT, STOPPED_BY_WATCHPOINT,
target_insert_watchpoint, target_remove_watchpoint):
Move defines to ...
* config/i386/nm-i386sco5.h: ... here.
(kernel_u_size): Add prototype. Improve a few comments and add
protection against multiple inclusion.
* i387-tdep.c (print_i387_value, print_i387_ext,
print_i387_status_word, print_i387_control_word): Add `struct
ui_file *' argument and use it for output.
(i387_print_float_info): Renamed from i387_float_info. Add
`struct gdbarch *' and `struct ui_file *' arguments and use the
latter for output.
* i386-tdep.c: Include "i387-tdep.h".
(i386_gdbarch_init): Set print_float_info.
* config/i386/tm-i386.h (i387_float_info): Remove prototype.
(FLOAT_INFO): Remove define.
* mips-tdep.c (mips_push_arguments): Rename to
mips_eabi_push_arguments, and tune for EABI.
(MIPS_REGS_HAVE_HOME_P): Delete.
(struct gdbarch_tdep): Remove mips_regs_have_home_p field.
(mips_gdbarch_init): Set gdbarch push_arguments for eabi.
Delete references to mips_regs_have_home_p.
* mips-tdep.c (mips_o32o64_push_arguments): New function,
cloned from mips_push_arguments, tuned for o32/o64 ABI.
(mips_gdbarch_init): Set gdbarch_push_arguments to new func.
* regcache.c (init_regcache_descr): Overallocate the
raw_register_valid_p array including space for NUM_PSEUDO_REGS.
(registers_changed): Replace NUM_REGS+NUM_PSEUDO_REGS with
num_raw_registers.
(set_register_cached): Add range checking assertions. Use
current_regcache.
(M68HC12_HARD_PC_REGNUM): Define specific PC for 68HC12 (pseudo reg).
(m68hc11_pseudo_register_read): Compute the 68HC12 PC using the
real PC and the page number (if it's within the memory bank window).
(m68hc11_pseudo_register_write): Likewise when saving.
(m68hc11_register_name): Name the virtual pc 'pc' and the real one ppc.
(m68hc11_register_virtual_type): Return uint32 for virtual pc.
(m68hc11_register_raw_size): And use 32-bit for it.
(m68hc11_gdbarch_init): Use 32-bit address for 68HC12 if the
16K memory bank is used by the prog; also use the virtual pc.
(m68hc11_gdbarch_init): Install it in gdbarch.
(MSYMBOL_SET_RTC, MSYMBOL_SET_RTI): New to set symbol specific flags.
(MSYMBOL_IS_RTC, MSYMBOL_IS_RTI): New to test these flags.
(MSYMBOL_SIZE): New for documentation.
(insn_return_kind): Enum to specify how a function returns.
(frame_extra_info): Cleanup and record the return mode.
(gdbarch_tdep, USE_PAGE_REGISTER): New to control the use of page
register in address computation.
(m68hc11_get_return_insn): New to obtain the return instruction used
by the function.
(m68hc11_frame_init_saved_regs): Take into account the return
instruction used by the function for far and interrupt functions.
(m68hc11_init_extra_frame_info): Take into account page register.
(m68hc11_frame_args_address): Adjust according to the return mode.
(show_regs): Print page register only when it's used.
(M68HC11_LAST_HARD_REG, m68hc11_register_names): Update.
(m68hc11_register_virtual_type): Return a 8-bit type for 8-bit
registers.
(m68hc11_register_raw_size): Likewise.
* i386-tdep.c (i386_register_name): Handle mmx registers.
(mmx_regnum_p): New function.
(i386_mmx_names): New array.
(mmx_num_regs): New variable.
(i386_pseudo_register_read): New function.
(i386_pseudo_register_write): New function.
(mmx_regnum_to_fp_regnum): New function. Code from Fernando Nasser.
* regcache.c (regcache_raw_read_unsigned): New function.
(regcache_raw_read_signed): New function.
* regcache.h (regcache_raw_read_unsigned): Declare.
(regcache_raw_read_signed): Declare.
(to_fixed_variant_branch_type) (find_line_in_linetable): Fix
prototype names so that grep ^func works properly.
* ada-lang.c (ada_array_element_type)
(ada_lookup_partial_symbol): Fix typos in parameter list.
* ada-valprint.c (val_print_packed_array_elements) (ada_val_print_1):
Fix prototype names so that grep ^func works properly.
Elena Zannoni <ezannoni@redhat.com>
Martin M. Hunt <hunt@redhat.com>
* gdbtypes.c (build_builtin_type_vec128): Set the vector bit.
(build_builtin_type_vec128i): Set the vector bit.
* gdbtypes.h (builtin_type_vec64, builtin_type_vec64i): Declare.
* gdbtypes.c (builtin_type_vec64, builtin_type_vec64i): Define.
(build_builtin_type_vec64): New function.
(build_builtin_type_vec64i): New function.
(build_gdbtypes): Initialize builtin_type_vec64 and
builtin_type_vec64i.
David Carlton
Keith Seitz
Michal Ludvig
Jason Thorpe
gdbadmin
Stephane Carrez
Mark Kettenis
Pierre Muller
Jim Blandy
Daniel Jacobowitz
Joel Brobecker
Andrew Cagney
Tom Tromey
Elena Zannoni
Michael Snyder
Kevin Buettner
Grace Sainsbury
Corinna Vinschen
Aidan Skinner