This removes set_batch_flag_and_make_cleanup_restore_page_info and
make_cleanup_restore_page_info in favor of a new RAII class. This
then allows for the removal of make_cleanup_restore_uinteger and
make_cleanup_restore_integer
ChangeLog
2017-10-03 Tom Tromey <tom@tromey.com>
* guile/scm-ports.c (ioscm_with_output_to_port_worker): Update.
* top.c (execute_command_to_string): Update.
* utils.c (make_cleanup_restore_page_info): Remove.
(do_restore_page_info_cleanup): Remove.
(set_batch_flag_and_restore_page_info):
New.
(make_cleanup_restore_page_info): Remove.
(set_batch_flag_and_make_cleanup_restore_page_info): Remove.
(~set_batch_flag_and_restore_page_info): New
(make_cleanup_restore_uinteger): Remove.
(make_cleanup_restore_integer): Remove.
(struct restore_integer_closure): Remove.
(restore_integer): Remove.
* utils.h (struct set_batch_flag_and_restore_page_info): New
class.
(set_batch_flag_and_make_cleanup_restore_page_info): Remove.
(make_cleanup_restore_page_info): Remove.
(make_cleanup_restore_uinteger) Remove.
(make_cleanup_restore_integer) Remove.
This changes record_full_gdb_operation_disable_set to return a
scoped_restore rather than a cleanup, and fixes all the users.
ChangeLog
2017-10-03 Tom Tromey <tom@tromey.com>
* record-full.h (record_full_gdb_operation_disable_set): Return
scoped_restore_tmpl<int>.
* infrun.c (adjust_pc_after_break): Update.
(handle_signal_stop): Update.
* record-full.c (record_full_gdb_operation_disable_set): Return
scoped_restore_tmpl<int>.
(record_full_wait_1, record_full_insert_breakpoint)
(record_full_remove_breakpoint, record_full_save)
(record_full_goto_insn): Update.
Printing a string slice ("&str") in Rust would print until the
terminating \0; but that is incorrect because a slice has a length.
This fixes &str printing, and arranges to preserve the type name when
slicing a slice, so that printing a slice of an "&str" works as well.
This is PR rust/22236.
2017-10-02 Tom Tromey <tom@tromey.com>
PR rust/22236:
* rust-lang.c (rust_val_print_str): New function.
(val_print_struct): Call it.
(rust_subscript): Preserve name of slice type.
2017-10-02 Tom Tromey <tom@tromey.com>
PR rust/22236:
* gdb.rust/simple.rs (main): New variable "fslice".
* gdb.rust/simple.exp: Add slice tests. Update string tests.
Something like "ptype &x[..]" (where "x" was a slice) would crash gdb.
rust_subscript wasn't handling slicing in the EVAL_AVOID_SIDE_EFFECTS
case.
2017-10-02 Tom Tromey <tom@tromey.com>
* rust-lang.c (rust_subscript): Handle slices in
EVAL_AVOID_SIDE_EFFECTS case.
2017-10-02 Tom Tromey <tom@tromey.com>
* gdb.rust/simple.exp: Test ptype of a slice.
rust_slice_type_p was not recognizing &str as a slice type, so indexing
into (or making a slice of) a slice was not working.
2017-10-02 Tom Tromey <tom@tromey.com>
* rust-lang.c (rust_slice_type_p): Recognize &str as a slice type.
2017-10-02 Tom Tromey <tom@tromey.com>
* gdb.rust/simple.exp: Test index of slice.
I noticed that one function in rust-lang.h was not declared using
"extern". In the interested of uniformity, this patch adds it.
Tested by rebuilding.
2017-10-02 Tom Tromey <tom@tromey.com>
* rust-lang.h (rust_slice_type): Add "extern".
G++ 4.8 trips on:
In file included from /opt/gcc-4.8/include/c++/4.8.5/algorithm:62:0,
from ../../src/gdb/ada-lang.c:65:
/opt/gcc-4.8/include/c++/4.8.5/bits/stl_algo.h: In instantiation of ‘_RandomAccessIterator std::__unguarded_partition(_RandomAccessIterator, _RandomAccessIterator, const _Tp&) [with _RandomAccessIterator = __gnu_cxx::__normal_iterator<ada_exc_info*, std::vector<ada_exc_info> >; _Tp = ada_exc_info]’:
/opt/gcc-4.8/include/c++/4.8.5/bits/stl_algo.h:2283:70: required from ‘_RandomAccessIterator std::__unguarded_partition_pivot(_RandomAccessIterator, _RandomAccessIterator) [with _RandomAccessIterator = __gnu_cxx::__normal_iterator<ada_exc_info*, std::vector<ada_exc_info> >]’
/opt/gcc-4.8/include/c++/4.8.5/bits/stl_algo.h:2315:54: required from ‘void std::__introsort_loop(_RandomAccessIterator, _RandomAccessIterator, _Size) [with _RandomAccessIterator = __gnu_cxx::__normal_iterator<ada_exc_info*, std::vector<ada_exc_info> >; _Size = long int]’
/opt/gcc-4.8/include/c++/4.8.5/bits/stl_algo.h:5461:36: required from ‘void std::sort(_RAIter, _RAIter) [with _RAIter = __gnu_cxx::__normal_iterator<ada_exc_info*, std::vector<ada_exc_info> >]’
../../src/gdb/ada-lang.c:13153:61: required from here
/opt/gcc-4.8/include/c++/4.8.5/bits/stl_algo.h:2245:19: error: passing ‘const ada_exc_info’ as ‘this’ argument of ‘bool ada_exc_info::operator<(const ada_exc_info&)’ discards qualifiers [-fpermissive]
while (__pivot < *__last)
^
Seems to be a libstdc++ bug meanwhile fixed by:
https://gcc.gnu.org/ml/libstdc++/2012-04/msg00074.
In any case, there's no reason these methods can't be const.
gdb/ChangeLog:
2017-10-02 Tom Tromey <tom@tromey.com>
Pedro Alves <palves@redhat.com>
* ada-lang.h (ada_exc_info::operator<): Make const.
(ada_exc_info::operator==): Make const.
* ada-lang.c (ada_exc_info::operator<, ada_exc_info::operator==):
Make const.
In gdbserver, target descriptions need to be initialized by calling
init_target_desc. Because i386_create_target_description is shared with
GDB, it doesn't do that, the callers must take care of it. These two
platforms currently don't.
I am not able to build them, so I couldn't test.
gdb/gdbserver/ChangeLog:
* lynx-i386-low.c (lynx_i386_arch_setup): Call init_target_desc.
* nto-x86-low.c (nto_x86_arch_setup): Likewise.
This changes read_memory_robust to return a std::vector, allowing the
removal of free_memory_read_result_vector and associated cleanups.
This patch also changes the functions it touches to be a bit more
robust with regards to deallocation; it's perhaps possible that
read_memory_robust could have leaked in some situations.
This patch is based on my earlier series to remove some MI cleanups.
Regression tested by the buildbot.
gdb/ChangeLog
2017-09-29 Tom Tromey <tom@tromey.com>
* target.c (read_whatever_is_readable): Change type of "result".
Update.
(free_memory_read_result_vector): Remove.
(read_memory_robust): Change return type. Update.
* mi/mi-main.c (mi_cmd_data_read_memory_bytes): Update. Use
bin2hex, std::string.
* target.h (memory_read_result_s): Remove typedef.
(free_memory_read_result_vector): Remove.
(read_memory_robust): Return std::vector.
Change captured_mi_execute_command to use a scoped_restore, removing a
cleanup. The old code copied the current token, but I don't believe
that is necessary.
gdb/ChangeLog
2017-09-29 Tom Tromey <tom@tromey.com>
* mi/mi-main.c (captured_mi_execute_command): Use scope_restore.
Change ada_exceptions_list to return a std::vector and fix up the
users. This allows removing a cleanup in MI.
gdb/ChangeLog
2017-09-29 Tom Tromey <tom@tromey.com>
* mi/mi-cmd-info.c (mi_cmd_info_ada_exceptions): Update.
* ada-lang.h (struct ada_exc_info): Remove typedef. Declare
operator< and operator==.
(ada_exceptions_list): Return a std::vector.
* ada-lang.c (ada_exc_info::operator<): Rename from
compare_ada_exception_info.
(ada_exc_info::operator==): New.
(sort_remove_dups_ada_exceptions_list): Change type of
"exceptions".
(ada_add_standard_exceptions, ada_add_exceptions_from_frame)
(ada_add_global_exceptions): Likewise.
(ada_exceptions_list_1): Return a std::vector.
(ada_exceptions_list): Likewise.
Change a couple of spots in mi-main.c to use std::set. This
simplifies the code and removes some cleanups.
gdb/ChangeLog
2017-09-29 Tom Tromey <tom@tromey.com>
* mi/mi-main.c (struct print_one_inferior_data) <inferiors>: Now a
'std::set *'.
(print_one_inferior): Update.
(free_vector_of_ints): Remove.
(list_available_thread_groups): Change "ids" to std::set.
(mi_cmd_list_thread_groups): Update.
(struct collect_cores_data) <core>: Now a std::set.
(collect_cores): Update.
(unique): Remove.
(print_one_inferior): Update.
Change a couple of spots in mi-main.c to use std::string, and change
one place to use field_fmt. This removes some cleanups.
gdb/ChangeLog
2017-09-29 Tom Tromey <tom@tromey.com>
* mi/mi-main.c (mi_execute_cli_command): Use std::string.
(mi_execute_async_cli_command): Likewise.
(mi_cmd_trace_frame_collected): Use field_fmt.
This changes mi_cmd_data_write_memory_bytes to use gdb::byte_vector,
removing some cleanups.
gdb/ChangeLog
2017-09-29 Tom Tromey <tom@tromey.com>
* mi/mi-main.c (mi_cmd_data_write_memory_bytes): Use
gdb::byte_vector.
There was a leftover cleanup declaration in mi_parse. Remove it.
gdb/ChangeLog
2017-09-29 Tom Tromey <tom@tromey.com>
* mi/mi-parse.c (mi_parse): Remove unused declaration.
This string copy in mi_cmd_disassemble seems not to be needed, so
don't do it.
gdb/ChangeLog
2017-09-29 Tom Tromey <tom@tromey.com>
* mi/mi-cmd-disas.c (mi_cmd_disassemble): Don't copy "oarg".
This removes some cleanups from mi-cmd-var.c. varobj_gen_name now
returns a string, simplifying mi_cmd_var_create. In
mi_cmd_var_delete, a string copy is apparently unnecessary, so it's
simply removed.
gdb/ChangeLog
2017-09-29 Tom Tromey <tom@tromey.com>
* varobj.h (varobj_gen_name): Return std::string.
* varobj.c (varobj_gen_name): Return std::string.
* mi/mi-cmd-var.c (mi_cmd_var_create): Use std::string.
(mi_cmd_var_delete): Don't copy "name".
This changes mi_argv_to_format to return a string, allowing the
removal of some cleanups.
gdb/ChangeLog
2017-09-29 Tom Tromey <tom@tromey.com>
* mi/mi-cmd-break.c (mi_argv_to_format): Return std::string.
(mi_cmd_break_insert_1): Update.
This removes make_cleanup_defer_target_commit_resume in favor of using
scoped_restore.
gdb/ChangeLog
2017-09-29 Tom Tromey <tom@tromey.com>
* target.h (make_scoped_defer_target_commit_resume): Update.
* target.c (make_scoped_defer_target_commit_resume): Rename from
make_cleanup_defer_target_commit_resume. Return a
scoped_restore.
* infrun.c (proceed): Use make_scoped_defer_target_commit_resume.
This removes an unused outer cleanup from symtab.c, and an unused
cleanup declaration as well.
gdb/ChangeLog
2017-09-29 Tom Tromey <tom@tromey.com>
* symtab.c (search_symbols): Remove unused outer cleanup.
(make_source_files_completion_list): Remove unused declaration.
Remove a cleanup from mt-tdep.c, using gdb::byte_vector.
gdb/ChangeLog
2017-09-29 Tom Tromey <tom@tromey.com>
* mt-tdep.c (mt_push_dummy_call): Use gdb::byte_vector.
This removes a cleanup from xstormy16-tdep.c, using gdb::byte_vector.
gdb/ChangeLog
2017-09-29 Tom Tromey <tom@tromey.com>
* xstormy16-tdep.c (xstormy16_push_dummy_call): Use
gdb::byte_vector.
This removes a cleanup from complaints.c by using std::string.
gdb/ChangeLog
2017-09-29 Tom Tromey <tom@tromey.com>
* complaints.c (vcomplaint): Use std::string.
This removes some cleanups from tracepoint.c by using std::string. It
also removes some unused cleanup declarations.
gdb/ChangeLog
2017-09-29 Tom Tromey <tom@tromey.com>
* tracepoint.c (trace_variable_command): Use std::string.
(encode_actions_1): Remove unused declarations.
(create_tsv_from_upload): Use std::string.
This removes some cleanups from cp-support.c, using std::string.
gdb/ChangeLog
2017-09-29 Tom Tromey <tom@tromey.com>
* cp-support.c (gdb_demangle): Use std::string.
This removes some cleanups from stack.c by using std::string or
gdb::unique_xmalloc_ptr. One cleanup remains in this file; I did not
remove it here because it is handled in another patch series that has
yet to be resolved.
gdb/ChangeLog
2017-09-29 Tom Tromey <tom@tromey.com>
* stack.c (parse_frame_specification): Use std::string
(info_frame_command): Use gdb::unique_xmalloc_ptr.
This removes a cleanup from tilegx-tdep.c, by using gdb::byte_vector.
gdb/ChangeLog
2017-09-29 Tom Tromey <tom@tromey.com>
* tilegx-tdep.c (tilegx_push_dummy_call): Use gdb::byte_vector.
This removes a couple of cleanups from utils.c through the use of
std::string.
gdb/ChangeLog
2017-09-29 Tom Tromey <tom@tromey.com>
* utils.c (vfprintf_maybe_filtered): Use std::string.
(vfprintf_unfiltered): Likewise.
This removes a cleanup from display_gdb_prompt by using std::string.
gdb/ChangeLog
2017-09-29 Tom Tromey <tom@tromey.com>
* event-top.c (top_level_prompt): Return std::string.
(display_gdb_prompt): Update.
This adds string_vprintf, a va_list variant of string_printf. This
will be used in later patches.
gdb/ChangeLog
2017-09-29 Tom Tromey <tom@tromey.com>
* unittests/common-utils-selftests.c (format): New function.
(string_vprintf_tests): New function.
(_initialize_common_utils_selftests): Register new tests.
* common/common-utils.c (string_vprintf): New function.
* common/common-utils.h (string_vprintf): Declare.
This finally eliminates an old hack left in place when tracepoint RSP
support was migrated from tracepoint.c to remote.c, back in
35b1e5cca0 ("Make tracepoint operations go through target vector.")
over 7 years ago.
Tested on x86_64 GNU/Linux.
gdb/ChangeLog:
2017-09-29 Pedro Alves <palves@redhat.com>
* remote.c (target_buf, target_buf_size): Delete.
(remote_get_noisy_reply): Remove buf_p and sizeof_buf parameters.
Use the connection's packet buffer instead.
All callers adjusted.
(_initialize_remote): Remove references to target_buf and
target_buf_size.
If we had this in place before, then the regression fixed by the
previous commit would have been been visible is all test runs. E.g.:
Running src/gdb/testsuite/gdb.threads/multi-create-ns-info-thr.exp ...
FAIL: gdb.threads/multi-create-ns-info-thr.exp: continue to breakpoint 6
Debugging manually we'd see this:
gdbserver: Cannot get thread handle for LWP 1467: generic error
Instead of:
gdbserver: PID mismatch! Expected 27472, got 27471
which is misleading - gdbserver didn't 27471, that was stale stack
data from previous function invocations.
gdb/gdbserver/ChangeLog:
2017-09-29 Pedro Alves <palves@redhat.com>
* proc-service.c (ps_pdread): Return PS_ERR if reading memory
fails.
Commit 8629910955 ("Add thread_db_notice_clone to gdbserver")
introduced calls into libthread_db without making sure that the
current thread is pointing to a know-stopped thread. This resulted in
sometimes thread_db_notice_clone failing->find_one_thread failing like
this, as seen when running gdb.threads/multi-create-ns-info-thr.exp:
~~~
Thread <6> executing
Thread <7> executing
gdbserver: PID mismatch! Expected 27472, got 27471
gdbserver: Cannot find thread after clone.
Thread <1000> executing
Thread <1001> executing
~~~
Things go south from here and sometimes that ends up resulting in
gdbserver crashing and the test failing.
gdb/gdbserver/ChangeLog:
2017-09-29 Pedro Alves <palves@redhat.com>
* linux-low.c (handle_extended_wait): Pass parent thread instead
of process to thread_db_notice_clone.
* linux-low.h (thread_db_notice_clone): Replace parent process
parameter with parent thread parameter.
* thread-db.c (find_one_thread): Add comment.
(thread_db_notice_clone): Replace parent process parameter with
parent thread parameter. Temporarily switch to the parent thread.
This file was only under gdb/ currently because it predates the
gdb/unittests/ directory.
gdb/ChangeLog:
2017-09-28 Pedro Alves <palves@redhat.com>
* Makefile.in (SUBDIR_UNITTESTS_SRCS): Add
unittests/common-utils-selftests.c.
(SUBDIR_UNITTESTS_OBS): Add common-utils-selftests.o.
(COMMON_OBS): Remove utils-selftests.o.
* utils-selftests.c: Move to ...
* unittests/common-utils-selftests.c: ... here and rename self
test to "string_printf".
This is a "tiny patch", no assignment required.
2017-09-28 Alexander Shaposhnikov <alexander.v.shaposhnikov@gmail.com>
* dwarf2read.c (open_and_init_dwp_file): Protect against dwp_file
having NULL cus or tus.
Many tdep files need to perform conversions between two floating-point
types, usually when accessing FP registers. Most targets now use the
convert_typed_floating helper routine to do so. However, a small number
still use the old method of converting via a DOUBLEST. Since we want
to get rid of DOUBLEST, these targets need to be moved to the new
method as well.
The main obstacle is that for convert_typed_floating we need an actual
*type*, not just a floatformat.
In arm-tdep.c, this is very straightforward, since there is already a
type using the ARM extended floatformat.
For sh-tdep.c and sh64-tdep.c, no such type already exists, so I've
added one to the gdbarch_tdep struct as done on other targets.
gdb/ChangeLog
2017-09-27 Ulrich Weigand <uweigand@de.ibm.com>
* arm-tdep.c: (convert_from_extended): Remove.
(convert_to_extended): Likewise.
(arm_extract_return_value): Use convert_typed_floating.
(arm_store_return_value): Likewise.
* sh-tdep.h (struct gdbarch_tdep): Add sh_littlebyte_bigword_type.
* sh-tdep.c: Do not include "floatformat.h".
(sh_littlebyte_bigword_type): New function.
(sh_register_convert_to_virtual): Use convert_typed_floating.
(sh_register_convert_to_raw): Likewise.
* sh64-tdep.c: (struct gdbarch_tdep): Add sh_littlebyte_bigword_type.
(sh64_littlebyte_bigword_type): New function.
(sh64_extract_return_value): Use convert_typed_floating.
(sh64_register_convert_to_virtual): Likewise.
(sh64_register_convert_to_raw): Likewise.
For historical reasons, the TYPE_FLOATFORMAT element is still set to hold
an array of two floatformat structs, one for big-endian and the other for
little-endian. When accessing the element via floatformat_from_type,
the code would check the type's byte order and return the appropriate
floatformat.
However, these days this is quite unnecessary, since the type's byte order
is already known at the time the type is allocated and the floatformat is
installed into TYPE_FLOATFORMAT. Therefore, we can just install the correct
version here.
Also, moves the (now trivially simple) floatformat_from_type accessor to
gdbtypes.{c,h}, since it doesn't really need to be in doublest.c now.
gdb/ChangeLog
2017-09-27 Ulrich Weigand <uweigand@de.ibm.com>
* doublest.h (floatformat_from_type): Move to gdbtypes.h.
* doublest.c (floatformat_from_type): Move to gdbtypes.c.
* gdbtypes.h (union type_specific): Make field floatformat hold
just a single struct floatformat, not an array.
(floatformat_from_type): Move here.
* gdbtypes.c (floatformat_from_type): Move here. Update to
changed TYPE_FLOATFORMAT definition.
(verify_floatformat): Update to changed TYPE_FLOATFORMAT.
(recursive_dump_type): Likewise.
(init_float_type): Install correct floatformat for byte order.
(arch_float_type): Likewise.
This changes the interfaces to init_type and arch_type to take the
type length in bits as input (instead of as bytes). The routines
assert that the length is a multiple of TARGET_CHAR_BIT.
For consistency, arch_flags_type is changed likewise, so that now
all type creation interfaces always use length in bits.
All callers are updated in the straightforward manner.
The assert actually found a bug in read_range_type, where the
init_integer_type routine was called with a wrong argument (probably
a bug introduced with the conversion to use init_integer_type).
gdb/ChangeLog
2017-09-27 Ulrich Weigand <uweigand@de.ibm.com>
* gdbtypes.c (init_type): Change incoming argument from
length-in-bytes to length-in-bits. Assert length is a
multiple of TARGET_CHAR_BITS.
(arch_type, arch_flags_type): Likewise.
(init_integer_type): Update call to init_type.
(init_character_type): Likewise.
(init_boolean_type): Likewise.
(init_float_type): Likewise.
(init_decfloat_type): Likewise.
(init_complex_type): Likewise.
(init_pointer_type): Likewise.
(objfile_type): Likewise.
(arch_integer_type): Update call to arch_type.
(arch_character_type): Likewise.
(arch_boolean_type): Likewise.
(arch_float_type): Likewise.
(arch_decfloat_type): Likewise.
(arch_complex_type): Likewise.
(arch_pointer_type): Likewise.
(gdbtypes_post_init): Likewise.
* dwarf2read.c (dwarf2_init_float_type): Update call to init_type.
(read_base_type): Likewise.
* mdebugread.c (basic_type): Likewise.
* stabsread.c (dbx_init_float_type): Likewise.
(rs6000_builtin_type): Likewise.
(read_range_type): Likewise. Also, fix call to init_integer_type
with erroneous length argument.
* ada-lang.c (ada_language_arch_info): Update call to arch_type.
* d-lang.c (build_d_types): Likewise.
* f-lang.c (build_fortran_types): Likewise.
* go-lang.c (build_go_types): Likewise.
* opencl-lang.c (build_opencl_types): Likewise.
* jit.c (finalize_symtab): Likewise.
* gnu-v3-abi.c (build_gdb_vtable_type): Likewise.
(build_std_type_info_type): Likewise.
* target-descriptions.c (tdesc_gdb_type): Likewise. Also,
update call to arch_flags_type.
* linux-tdep.c (linux_get_siginfo_type_with_fields): Update call to
arch_type.
* fbsd-tdep.c (fbsd_get_siginfo_type): Likewise.
* windows-tdep.c (windows_get_tlb_type): Likewise.
* avr-tdep.c (avr_gdbarch_init): Update call to arch_type.
* ft32-tdep.c (ft32_gdbarch_init): Likewise.
* m32c-tdep.c (make_types): Likewise.
* rl78-tdep.c (rl78_gdbarch_init): Likewise.
(rl78_psw_type): Update call to arch_flags_type.
* m68k-tdep.c (m68k_ps_type): Update call to arch_flags_type.
* rx-tdep.c (rx_psw_type): Likewise.
(rx_fpsw_type): Likewise.
* sparc-tdep.c (sparc_psr_type): Likewise.
(sparc_fsr_type): Likewise.
* sparc64-tdep.c (sparc64_pstate_type): Likewise.
(sparc64_ccr_type): Likewise.
(sparc64_fsr_type): Likewise.
(sparc64_fprs_type): Likewise.
This also makes delete_command static; but now I wonder if it is used
in Insight and should not be touched.
gdb/ChangeLog
2017-09-27 Tom Tromey <tom@tromey.com>
* breakpoint.h (delete_command): Don't declare.
* breakpoint.c (delete_command, enable_once_command)
(enable_count_command, enable_delete_command, breakpoint_1)
(maintenance_info_breakpoints, stopin_command, stopat_command)
(delete_command, delete_trace_command, save_breakpoints)
(save_breakpoints_command, save_tracepoints_command): Constify.
Note that this commit also changes deprecated_file_changed_hook -- not
used in the tree, but Insight will require a (presumably minor)
change.
gdb/ChangeLog
2017-09-27 Tom Tromey <tom@tromey.com>
* symfile.c (symbol_file_command): Constify.
* gdbcore.h (deprecated_file_changed_hook): Constify.
* exec.c (deprecated_file_changed_hook, exec_file_command)
(file_command): Constify.
* defs.h (symbol_file_command): Constify.
In addition to the constification, this fixes a command-repeat bug.
gdb/ChangeLog
2017-09-27 Tom Tromey <tom@tromey.com>
* tracepoint.c (delete_trace_variable_command)
(tfind_end_command, tfind_start_command, tfind_pc_command)
(tfind_tracepoint_command, tfind_line_command)
(tfind_range_command, tfind_outside_command): Constify.
This adds two add_cmd overloads: one whose callback takes a const char *,
and one that doesn't accept a function at all. The no-function overload
was introduced to avoid ambiguity when NULL was passed as the function.
Long term the goal is for all commands to take const arguments, and
for the non-const variants to be removed entirely.
gdb/ChangeLog
2017-09-27 Tom Tromey <tom@tromey.com>
* cli/cli-decode.c (add_cmd, set_cmd_cfunc): New function
overloads.
(do_add_cmd): Rename from add_cmd. Don't call set_cmd_cfunc.
(do_const_cfunc): New function.
(cmd_cfunc_eq): New overload.
(cli_user_command_p): Check do_const_cfunc.
* cli/cli-decode.h (struct cmd_list_element) <function>: New field
const_cfunc.
* command.h (add_cmd): Add const overload and no-function
overload.
(set_cmd_cfunc): Add const overload.
(cmd_const_cfunc_ftype): Declare.
(cmd_cfunc_eq): Add const overload.
* breakpoint.c, cli-cmds.c, cli-dump.c, guile/scm-cmd.c,
python/py-cmd.c, target.c, tracepoint.c: Use no-function add_cmd
overload.
C++2a adds a "__VA_OPT__" feature that can be used to control the
pesky "," emission when the final (variable) argument of a variadic
macro is empty. This patch implements this feature for gdb. (A patch
to implement it for gcc is pending.)
gdb/ChangeLog
2017-09-27 Tom Tromey <tom@tromey.com>
* macroexp.c (get_next_token_for_substitution): New function.
(substitute_args): Call it. Check for __VA_OPT__.
gdb/testsuite/ChangeLog
2017-09-27 Tom Tromey <tom@tromey.com>
* gdb.base/macscp.exp: Add __VA_OPT__ tests.
GDB has a workaround for DWARF output by ICC, related to missing
DW_AT_declaration on incomplete types. The bug was fixed in ICC 14,
so this commit adjusts GDB accordingly.
For the version check, this adds a new parser function for the ICC
producer string. While at it, it also adds unit tests for the
producer parsing covering the new function and preexisting parsers.
gdb/ChangeLog:
2017-09-26 Walfred Tedeschi <walfred.tedeschi@intel.com>
Pedro Alves <palves@redhat.com>
* dwarf2read.c (dwarf2_cu): Remove field producer_is_icc and add
producer_is_icc_lt_14.
(producer_is_icc_lt_14): New function.
(check_producer): Add code for checking version of ICC.
(producer_is_icc): Move to producer.c.
(read_structure_type): Restrict ICC workaround to ICC<14.
* producer.c: Include selftest.h.
(producer_is_icc, producer_parsing_tests, _initialize_producer):
New functions.
* producer.h (producer_is_icc): New declaration.
This is a technical debt that I left when I ported "switch_to_thread"
to gdbserver. It's a simple patch that converts occurences of:
current_thread = find_thread_ptid (ptid);
to:
switch_to_thread (ptid);
This patch also converts a simple "if" to a "gdb_assert" on
gdbserver's version of "switch_to_thread":
gdb_assert (ptid != minus_one_ptid);
This change makes the code more similar to what GDB already does.
Regtested on BuildBot.
gdb/gdbserver/ChangeLog:
2017-09-26 Sergio Durigan Junior <sergiodj@redhat.com>
* gdbthread.h: Include "common-gdbthread.h".
* inferiors.c (switch_to_thread): Use "gdb_assert" instead of
"if" when validating the ptid.
* remote-utils.c: Include "gdbthread.h".
(prepare_resume_reply): Use "switch_to_thread".
* target.c (done_accessing_memory): Likewise.
Triggered by https://launchpad.net/bugs/1275210, to be able to cope
with UTF-8 characters in gdbtui.
Reference:
https://sourceware.org/ml/gdb-patches/2017-09/msg00356.html
gdb/ChangeLog:
2017-09-26 Matthias Klose <doko@ubuntu.com>
* configure.ac: Search ncursesw before ncurses.
Check ncursesw/ncurses.h before ncurses/ncurses.h.
* gdb_curses.h: Include <ncursesw/ncurses.h>
* config.in, configure: Regenerate.
Given that GCC has obsoleted/removed support for Solaris 9 in GCC 4.9/5 in 2013:
https://gcc.gnu.org/gcc-4.9/changes.htmlhttps://gcc.gnu.org/ml/gcc-patches/2013-05/msg00728.html
and the last gdb version that can be compiled with gcc 4.9 is 7.12.1 only when
configured with --disable-build-with-cxx, it's time to obsolete/remove support
for Solaris < 10.
This patch does this, simplifying configure.nat along the way (only a single
sol2 configuration with variants for i386 and sparc).
Some configure checks for older Solaris versions can go, too, and the check
for libthread_db.so.1 removed:
* Since Solaris 10, dlopen has moved to libc and libdl.so is just a
filter on ld.so.1, so no need to check.
* $RDYNAMIC is already handled above (and is a no-op with Solaris ld
anyway).
Both proc-service.c and sol-thread.c lose support for (Solaris-only)
PROC_SERVICE_IS_OLD.
The attached revised patch has been tested on sparcv9-sun-solaris2.10,
sparcv9-sun-solaris2.11.4, amd64-pc-solaris2.10, amd64-pc-solaris2.11.4,
and x86_64-pc-linux-gnu.
I've also started an i386-pc-solaris2.9 build to check that it really
stops as expected.
PR gdb/22185
* configure.host <*-*-solaris2.[01], *-*-solaris2.[2-9]*>: Mark as
obsolete.
Use gdb_host sol2 for i[34567]86-*-solaris2*, x86_64-*-solaris2*.
Remove i386sol2 support.
* configure.nat <i386sol2>: Remove.
<sol2-64>: Fold into ...
<sol2>: ... this.
Move common settings to default section.
Add sol-thread.o.
* configure.tgt <i[34567]86-*-solaris2.1[0-9]*,
x86_64-*-solaris2.1[0-9]*>: Rename to ...
<i[34567]86-*-solaris2*, x86_64-*-solaris2*>: ... this.
<i[34567]86-*-solaris*>: Remove.
<sparc-*-solaris2.[0-6], sparc-*-solaris2.[0-6].*>: Remove.
* configure.ac: Remove wctype in libw check.
(_MSE_INT_H): Don't define on Solaris 7-9.
<solaris*>: Remove libthread_db.so.1 check.
* configure: Regenerate.
* config.in: Regenerate.
* proc-service.c: Remove PROC_SERVICE_IS_OLD handling.
(gdb_ps_prochandle_t, gdb_ps_read_buf_t, gdb_ps_write_buf_t)
(gdb_ps_size_t): Remove.
Use base types in users.
* sol-thread.c: Likewise, also for gdb_ps_addr_t.
* NEWS (Changes since GDB 8.0): Document Solaris 2.0-9 removal.
When testing my Solaris < 10 removal patch on Solaris/SPARC, I found
that gdb mainline is currently broken there due to the recent SPARC M7
ADI patches:
/vol/src/gnu/gdb/gdb/local/gdb/sparc64-tdep.c:1876:0: error: "PSR_ICC" redefined [-Werror]
#define PSR_ICC 0x00f00000
^
In file included from /usr/include/v7/sys/privregs.h:24:0,
from /usr/include/sys/regset.h:420,
from /usr/include/sys/ucontext.h:21,
from /usr/include/sys/signal.h:231,
from /usr/include/sys/procset.h:23,
from /usr/include/sys/wait.h:25,
from /usr/include/stdlib.h:21,
from build-gnulib/import/stdlib.h:36,
from /vol/src/gnu/gdb/gdb/local/gdb/common/common-defs.h:53,
from /vol/src/gnu/gdb/gdb/local/gdb/defs.h:28,
from /vol/src/gnu/gdb/gdb/local/gdb/sparc64-tdep.c:20:
/usr/include/v7/sys/psr.h:35:0: note: this is the location of the previous definition
#define PSR_ICC 0x00F00000 /* integer condition codes */
^
/vol/src/gnu/gdb/gdb/local/gdb/sparc64-tdep.c:1878:0: error: "PSR_IMPL" redefined [-Werror]
#define PSR_IMPL 0xf0000000
^
In file included from /usr/include/v7/sys/privregs.h:24:0,
from /usr/include/sys/regset.h:420,
from /usr/include/sys/ucontext.h:21,
from /usr/include/sys/signal.h:231,
from /usr/include/sys/procset.h:23,
from /usr/include/sys/wait.h:25,
from /usr/include/stdlib.h:21,
from build-gnulib/import/stdlib.h:36,
from /vol/src/gnu/gdb/gdb/local/gdb/common/common-defs.h:53,
from /vol/src/gnu/gdb/gdb/local/gdb/defs.h:28,
from /vol/src/gnu/gdb/gdb/local/gdb/sparc64-tdep.c:20:
/usr/include/v7/sys/psr.h:41:0: note: this is the location of the previous definition
#define PSR_IMPL 0xF0000000 /* implementation */
^
Comparing Solaris 11.4 <v7/sys/psr.h> and sparc64-tdep.c, there are more
inconsistencies:
<v7/sys/psr.h>:
#define PSR_S 0x00000080 /* supervisor mode */
#define PSR_ICC 0x00F00000 /* integer condition codes */
#define PSR_VER 0x0F000000 /* mask version */
#define PSR_IMPL 0xF0000000 /* implementation */
#define PSR_RSV 0x000FC000 /* reserved */
sparc64-tdep.c:
#define PSR_S 0x00000080
#define PSR_ICC 0x00f00000
#define PSR_VERS 0x0f000000
#define PSR_IMPL 0xf0000000
#define PSR_V8PLUS 0xff000000
#define PSR_XCC 0x000f0000
Apart from the capitalization differences that trip g++, the names
differ (PSR_VER vs. PSR_VERS), PSR_XCC is included in Solaris' PSR_RSV,
and there's no PSR_V8PLUS on Solaris either.
/vol/src/gnu/gdb/gdb/local/gdb/sparc64-tdep.c: In function `int adi_tag_fd()':
/vol/src/gnu/gdb/gdb/local/gdb/sparc64-tdep.c:296:63: error: format `%d' expects argument of type `int', but argument 4 has type `pid_t {aka long int}' [-Werror=format=]
snprintf (cl_name, sizeof(cl_name), "/proc/%d/adi/tags", pid);
^
/vol/src/gnu/gdb/gdb/local/gdb/sparc64-tdep.c: In function `bool adi_is_addr_mapped(CORE_ADDR, std::size_t)':
/vol/src/gnu/gdb/gdb/local/gdb/sparc64-tdep.c:314:64: error: format `%d' expects argument of type `int', but argument 4 has type `pid_t {aka long int}' [-Werror=format=]
snprintf (filename, sizeof filename, "/proc/%d/adi/maps", pid);
^
You cannot always print a pid_t, which can be either int or long on
Solaris, as an int.
Obviously, the ADI patch which modifies code shared between all SPARC
targets, hasn't been tested on anything but Linux/SPARC.
The patch below includes the minimal fixes necessary to unbreak the
Solaris/SPARC build.
However, as detailed in the PR, there's more breakage here: apart from
not bothering to implement ADI support on Solaris, the code contains
several more changes to shared/common SPARC code that are simply wrong
on anything but Linux/SPARC.
The patch was tested on sparcv9-sun-solaris2.10 and
sparcv9-sun-solaris2.11.4 (build and gdb/gdb gdb/gdb smoke test only).
PR build/22206
* sparc64-tdep.c (adi_tag_fd): Print pid as long.
(adi_is_addr_mapped): Likewise.
(PSR_ICC): Don't redefine.
(PSR_IMPL): Likewise.
compare-sections.exp has two cases that are not handled appropriately:
1) value read with msb set
2) error while patching that section
This patch adapts the "get value of read-only section" test to print
the value as an unsigned integer to fix 1) and test for the error
message to not set the written variable if read-only section cannot
be written to so as to solve 2).
2017-09-26 Thomas Preud'homme <thomas.preudhomme@arm.com>
Pedro Alves <palves@redhat.com>
gdb/testsuite/
* gdb.base/compare-sections.exp (get value of read-only section): Read
as unsigned value.
(corrupt read-only section): Likewise and don't set written if patching
failed.
This removes the last cleanup from regcache.c by changing one function
to use std::string.
gdb/ChangeLog
2017-09-25 Tom Tromey <tom@tromey.com>
* regcache.c (regcache::dump): Use string_printf.
This removes make_cleanup_regcache_invalidate in favor of a simple
RAII class that handles register invalidation.
gdb/ChangeLog
2017-09-25 Tom Tromey <tom@tromey.com>
* regcache.c (class regcache_invalidator): New.
(struct register_to_invalidate): Remove.
(make_cleanup_regcache_invalidate): Remove.
(regcache::raw_write): Use regcache_invalidator.
This documents the newly added support for guarded-storage registers on
IBM z.
gdb/ChangeLog:
* NEWS: Advertise support for guarded-storage registers on IBM z.
gdb/doc/ChangeLog:
* gdb.texinfo (S/390 and System z Features): Document the new
features org.gnu.gdb.s390.gs and org.gnu.gdb.s390.gsbc.
Enable gdbserver to deal with the new guarded-storage register sets.
gdb/gdbserver/ChangeLog:
* configure.srv (s390*-*-linux*): Add s390-gs-linux64.o and
s390x-gs-linux64.o to srv_regobj. Add s390-gs-linux64.xml,
s390x-gs-linux64.xml, s390-gs.xml, and s390-gsbc.xml to
srv_xmlfiles. Add s390-gs-linux64-ipa.o and
s390x-gs-linux64-ipa.o to ipa_obj.
* linux-s390-low.c (HWCAP_S390_GS): New define.
(s390_fill_gs, s390_store_gs, s390_fill_gsbc, s390_store_gsbc):
New functions.
(s390_regsets): Add regsets for NT_S390_GS_CB and NT_S390_GS_BC.
(s390_arch_setup): Check for guarded-storage support and choose
appropriate tdesc.
(initialize_low_arch): Invoke init_registers_s390_gs_linux64 and
init_registers_s390x_gs_linux64.
* linux-s390-tdesc.h (enum s390_linux_tdesc) <S390_TDESC_GS>: New
enum value.
(init_registers_s390x_gs_linux64, tdesc_s390x_gs_linux64)
(init_registers_s390_gs_linux64, tdesc_s390_gs_linux64): Declare.
Recognize targets with the new guarded-storage feature and then present
the guarded-storage registers and the Linux-specific guarded-storage
broadcast control block appropriately.
gdb/ChangeLog:
* s390-linux-nat.c (have_regset_gs): New static variable.
(s390_linux_fetch_inferior_registers): Handle guarded-storage
control block and guarded-storage broadcast control regsets.
(s390_read_description): Detect whether the target has
guarded-storage support, return appropriate tdesc.
* s390-linux-tdep.c (features/s390-gs-linux64.c): New include.
(features/s390x-gs-linux64.c): Likewise.
(struct gdbarch_tdep) <have_gs>: New field.
(s390_regmap_gs, s390_regmap_gsbc, s390_gs_regset)
(s390_gsbc_regset): New variables.
(s390_iterate_over_regset_sections): Iterate over s390_gs_regset
and s390_gsbc_regset, if applicable.
(s390_core_read_description): Check whether core file was from a
target with guarded-storage support; include appropriate regsets.
(s390_gdbarch_init): Add registers for guarded-storage support.
(_initialize_s390_tdep): Initialize new target descriptions that
include registers for guarded-storage support.
* s390-linux-tdep.h (HWCAP_S390_GS, S390_GSD_REGNUM)
(S390_GSSM_REGNUM, S390_GSEPLA_REGNUM)
(S390_BC_GSD_REGNUM, S390_BC_GSSM_REGNUM): New defines.
(S390_NUM_REGS): Adjust macro definition.
(s390_gs_regset, s390_gsbc_regset, tdesc_s390_gs_linux64)
(tdesc_s390x_gs_linux64): New declarations.
Newer Linux kernel versions offer two new register sets in support of the
z/Architecture's guarded storage facility. This patch adds XML
descriptions and the respective autogenerated .c and .dat files for
s390/s390x targets with this feature.
gdb/ChangeLog:
* features/s390-gs-linux64.xml: New file.
* features/s390-gs.xml: New file.
* features/s390-gsbc.xml: New file.
* features/s390x-gs-linux64.xml: New file.
* features/Makefile (WHICH): Add s390-gs-linux64 and
s390x-gs-linux64.
(s390-gs-linux64-expedite, s390x-gs-linux64-expedite): New macros.
(XMLTOC): Add s390-gs-linux64.xml and s390x-linux64.xml.
* features/s390-gs-linux64.c: New generated file.
* features/s390x-gs-linux64.c: New file.
* regformats/s390-gs-linux64.dat: New file.
* regformats/s390x-gs-linux64.dat: New file.
An earlier patch of mine removed make_cleanup_override_quit_handler,
but neglected to remove the declaration. This patch removes it.
Tested by rebuilding. I'm committing this as obvious.
ChangeLog
2017-09-23 Tom Tromey <tom@tromey.com>
* defs.h (make_cleanup_override_quit_handler): Don't declare.
Simon pointed out that scoped_input_handler::m_quit_handler must have
the correct scoped_restore_tmpl type, to avoid binding to a temporary.
This patch fixes the problem.
gdb/ChangeLog
2017-09-22 Tom Tromey <tom@tromey.com>
* utils.c (class scoped_input_handler) <m_quit_handler>: Change
type to scoped_restore_tmpl.
<scoped_input_handler>: Initialize m_quit_handler directly.
Reviewed-By: Pedro Alves <palves@redhat.com>
Currently we have "current_directory" and "gdb_dirbuf" globals, which
means that we basically have two possible places to consult when we
want to know GDB's current working directory.
This is not ideal and can lead to confusion. Moreover, the way we're
using "gdb_difbuf" along with "getcwd" is problematic because we
declare the buffer with "1024" elements hardcoded, which does not take
into account longer pathnames that are possible in many filesystems.
Using "PATH_MAX" would also not be a solution because of portability
problems. Therefore, the best solution is to rely on the fact that
"getcwd (NULL, 0)" will "do the right thing" and return a
heap-allocated string containing the full path. With the new "getcwd"
module from gnulib, it is now possible to do that without worrying
about breaking some host.
With this patch "current_directory" is now the only place to check for
GDB's cwd.
Reviewed-by: Pedro Alves <palves@redhat.com>
gdb/ChangeLog:
2017-09-22 Sergio Durigan Junior <sergiodj@redhat.com>
* cli/cli-cmds.c (pwd_command): Use "getcwd (NULL, 0)".
(cd_command): Likewise. Free "current_directory" before
assigning to it.
* main.c (captured_main_1): Use "getcwd (NULL, 0)".
* mi/mi-cmd-env.c (mi_cmd_env_pwd): Likewise.
* top.c (gdb_dirbuf): Remove global declaration.
* top.h (gdb_dirbuf): Likewise.
These two modules are necessary because of the rework that will be
done in the "change directory" logic on GDB/gdbserver in the next
commits.
First, we will get rid of the "gdb_dirbuf" global variable and instead
rely on the fact that "getcwd (NULL, 0)", which is a GNU extension,
returns a heap-allocated string with the necessary bytes to hold the
full path. This is a good practice not only because globals are not
ideal but also because there is no good way to know beforehand the
size of the full pathname allowed in the filesystem ("PATH_MAX" is not
portable and does not reflect all the possible filesystems out there).
We will also have a way to "cd" to a directory also on gdbserver, but
in order to do that uniformly, there must be a way to do tilde
expansion on directories provided by the user. Currently, GDB uses
"tilde_expand" from readline to do that, but gdbserver doesn't link
against readline and therefore cannot use this function. The solution
is to use "glob" instead, which can perform tilde expansion as a GNU
extension. Therefore, we need gnulib's version of "glob".
A special note is necessary for gdb/ser-tcp.c. It defines "close" as
"closesocket" on Win32 targets. If we leave the code as is, this
would conflict with gnulib's definition of "close". Therefore, in
order to keep the same code path from before this import, I decided to
"#undef close" first, and then let the original (re)definition of it
take place.
gdb/ChangeLog:
2017-09-22 Sergio Durigan Junior <sergiodj@redhat.com>
* gnulib/aclocal.m4: Regenerate.
* gnulib/config.in: Regenerate.
* gnulib/configure: Regenerate.
* gnulib/import/Makefile.am: Regenerate.
* gnulib/import/Makefile.in: Regenerate.
* gnulib/import/assure.h: New file.
* gnulib/import/at-func.c: Likewise
* gnulib/import/chdir-long.c: New file.
* gnulib/import/chdir-long.h: New file.
* gnulib/import/cloexec.c: New file.
* gnulib/import/cloexec.h: New file.
* gnulib/import/close.c: New file.
* gnulib/import/closedir.c: New file.
* gnulib/import/dirent-private.h: New file.
* gnulib/import/dup-safer.c: New file.
* gnulib/import/dup.c: New file.
* gnulib/import/dup2.c: New file.
* gnulib/import/error.c: New file.
* gnulib/import/error.h: New file.
* gnulib/import/exitfail.c: New file.
* gnulib/import/exitfail.h: New file.
* gnulib/import/fchdir.c: New file.
* gnulib/import/fcntl.c: New file.
* gnulib/import/fcntl.in.h: New file.
* gnulib/import/fd-hook.c: New file.
* gnulib/import/fd-hook.h: New file.
* gnulib/import/fd-safer.c: New file.
* gnulib/import/fdopendir.c: New file.
* gnulib/import/filename.h: New file.
* gnulib/import/filenamecat-lgpl.c: New file.
* gnulib/import/filenamecat.h: New file.
* gnulib/import/fstat.c: New file.
* gnulib/import/fstatat.c: New file.
* gnulib/import/getcwd-lgpl.c: New file.
* gnulib/import/getcwd.c: New file.
* gnulib/import/getdtablesize.c: New file.
* gnulib/import/getlogin_r.c: New file.
* gnulib/import/getprogname.c: New file.
* gnulib/import/getprogname.h: New file.
* gnulib/import/gettext.h: New file.
* gnulib/import/glob-libc.h: New file.
* gnulib/import/glob.c: New file.
* gnulib/import/glob.in.h: New file.
* gnulib/import/intprops.h: New file.
* gnulib/import/m4/chdir-long.m4: New file.
* gnulib/import/m4/close.m4: New file.
* gnulib/import/m4/closedir.m4: New file.
* gnulib/import/m4/d-ino.m4: New file.
* gnulib/import/m4/d-type.m4: New file.
* gnulib/import/m4/dup.m4: New file.
* gnulib/import/m4/dup2.m4: New file.
* gnulib/import/m4/error.m4: New file.
* gnulib/import/m4/fchdir.m4: New file.
* gnulib/import/m4/fcntl.m4: New file.
* gnulib/import/m4/fcntl_h.m4: New file.
* gnulib/import/m4/fdopendir.m4: New file.
* gnulib/import/m4/filenamecat.m4: New file.
* gnulib/import/m4/fstat.m4: New file.
* gnulib/import/m4/fstatat.m4: New file.
* gnulib/import/m4/getcwd-abort-bug.m4: New file.
* gnulib/import/m4/getcwd-path-max.m4: New file.
* gnulib/import/m4/getcwd.m4: New file.
* gnulib/import/m4/getdtablesize.m4: New file.
* gnulib/import/m4/getlogin_r.m4: New file.
* gnulib/import/m4/getprogname.m4: New file.
* gnulib/import/m4/glob.m4: New file.
* gnulib/import/m4/gnulib-cache.m4: Regenerate.
* gnulib/import/m4/gnulib-comp.m4: Regenerate.
* gnulib/import/m4/mempcpy.m4: New file.
* gnulib/import/m4/memrchr.m4: New file.
* gnulib/import/m4/mode_t.m4: New file.
* gnulib/import/m4/msvc-inval.m4: New file.
* gnulib/import/m4/msvc-nothrow.m4: New file.
* gnulib/import/m4/open.m4: New file.
* gnulib/import/m4/openat.m4: New file.
* gnulib/import/m4/opendir.m4: New file.
* gnulib/import/m4/readdir.m4: New file.
* gnulib/import/m4/realloc.m4: New file.
* gnulib/import/m4/rewinddir.m4: New file.
* gnulib/import/m4/save-cwd.m4: New file.
* gnulib/import/m4/strdup.m4: New file.
* gnulib/import/m4/strerror.m4: New file.
* gnulib/import/m4/unistd-safer.m4: New file.
* gnulib/import/mempcpy.c: New file.
* gnulib/import/memrchr.c: New file.
* gnulib/import/msvc-inval.c: New file.
* gnulib/import/msvc-inval.h: New file.
* gnulib/import/msvc-nothrow.c: New file.
* gnulib/import/msvc-nothrow.h: New file.
* gnulib/import/open.c: New file.
* gnulib/import/openat-die.c: New file.
* gnulib/import/openat-priv.h: New file.
* gnulib/import/openat-proc.c: New file.
* gnulib/import/openat.c: New file.
* gnulib/import/openat.h: New file.
* gnulib/import/opendir.c: New file.
* gnulib/import/pipe-safer.c: New file.
* gnulib/import/readdir.c: New file.
* gnulib/import/realloc.c: New file.
* gnulib/import/rewinddir.c: New file.
* gnulib/import/save-cwd.c: New file.
* gnulib/import/save-cwd.h: New file.
* gnulib/import/strdup.c: New file.
* gnulib/import/strerror-override.c: New file.
* gnulib/import/strerror-override.h: New file.
* gnulib/import/strerror.c: New file.
* gnulib/import/unistd--.h: New file.
* gnulib/import/unistd-safer.h: New file.
* gnulib/update-gnulib.sh (IMPORTED_GNULIB_MODULES): Add
"getcwd" and "glob".
* ser-tcp.c: Undefine "close" before redefining it.
When trying to run gdbserver compiled for x86 win32 under wine, I get:
$ wine ./gdbserver/gdbserver.exe --once :1234 ./test
/home/emaisin/src/binutils-gdb/gdb/gdbserver/regcache.c:177: A problem internal to GDBserver has been detected.
regcache* new_register_cache(const target_desc*): Assertion `tdesc->registers_size != 0' failed.
It seems like on that platform, init_target_desc is never called, so
registers_size is never computed.
My first thought was to call init_target_desc somewhere in win32-low.c,
but it turns out that when using win32 on arm, the target description is
already initialized by the generated code. My second thought was to
call it in {i386,amd64}_create_target_description, but those functions
are shared with GDB, and init_target_desc is gdbserver-specific. So I
ended up with the simplest fix, calling it in i386_arch_setup.
Now I hit some other problem:
$ wine ./gdbserver/gdbserver.exe --once :1234 ./test
Killing process(es): 39
No program to debug
Exiting
but still, I think fixing the tdesc issue this is a step forward.
gdb/gdbserver/ChangeLog:
* win32-i386-low.c (i386_arch_setup): Call init_target_desc.
I am getting this warning with clang:
/home/emaisin/src/binutils-gdb/gdb/guile/scm-value.c:439:11: error: variable 'address' is used uninitialized whenever 'if' condition is false [-Werror,-Wsometimes-uninitialized]
if (res_val != NULL)
^~~~~~~~~~~~~~~
/home/emaisin/src/binutils-gdb/gdb/guile/scm-value.c:444:32: note: uninitialized use occurs here
if (gdbscm_is_exception (address))
^~~~~~~
/home/emaisin/src/binutils-gdb/gdb/guile/scm-value.c:439:7: note: remove the 'if' if its condition is always true
if (res_val != NULL)
^~~~~~~~~~~~~~~~~~~~
/home/emaisin/src/binutils-gdb/gdb/guile/scm-value.c:427:18: note: initialize the variable 'address' to silence this warning
SCM address;
^
= nullptr
We can get rid of it with a small refactoring. I think it's a bit
cleaner/safer to initialize address with a pessimistic value and assign
it on success. Then there's no chance of using it uninitialized. If I
understand correctly, the NULL check on res_val was to check whether
value_addr threw, and that if value_addr returns without throwing, the
result will never be NULL. If that's true, we can skip the res_val
variable.
Tested by running gdb.guile/*.exp locally.
gdb/ChangeLog:
* guile/scm-value.c (gdbscm_value_address): Initialize address,
get rid of res_val.
I just tried to compile gdb trunk on Solaris 11.4 (formerly 12), and
failed for a couple of reasons:
*
In file included from /usr/include/python2.7/Python.h:128:0,
from /vol/src/gnu/gdb/gdb/dist/gdb/python/python-internal.h:94,
from /vol/src/gnu/gdb/gdb/dist/gdb/python/py-instruction.h:23,
from /vol/src/gnu/gdb/gdb/dist/gdb/python/py-instruction.c:21:
/usr/include/python2.7/ceval.h:67:0: error: ignoring #pragma no_inline [-Werror=unknown-pragmas]
#pragma no_inline(PyEval_EvalFrameEx)
^
New in Solaris 11.4: <python2.7/ceval.h> uses a Studio-only #pragma.
I've disabled the warning in warnings.m4.
*
/vol/src/gnu/gdb/gdb/dist/gdb/ser-pipe.c: In function ‘int pipe_open(serial*, const char*)’:
/vol/src/gnu/gdb/gdb/dist/gdb/ser-pipe.c:77:9: error: ‘pid_t vfork()’ is deprecated (declared at /usr/include/unistd.h:659) [-Werror=deprecated-declarations]
pid = vfork ();
^
/vol/src/gnu/gdb/gdb/dist/gdb/ser-pipe.c:77:16: error: ‘pid_t vfork()’ is deprecated (declared at /usr/include/unistd.h:659) [-Werror=deprecated-declarations]
pid = vfork ();
^
Since Solaris 11, vfork () is marked deprecated in <unistd.h>.
cf. vfork(2):
The vfork() and vforkx() functions are deprecated. Their sole legiti-
mate use as a prelude to an immediate call to a function from the exec
family can be achieved safely by posix_spawn(3C) or posix_spawnp(3C).
Again, I've disabled the warning.
*
/vol/src/gnu/gdb/gdb/dist/gdb/cli/cli-cmds.c: In function ‘void shell_escape(const char*, int)’:
/vol/src/gnu/gdb/gdb/dist/gdb/cli/cli-cmds.c:750:14: error: ‘pid_t vfork()’ is deprecated (declared at /usr/include/unistd.h:659) [-Werror=deprecated-declarations]
if ((pid = vfork ()) == 0)
^
/vol/src/gnu/gdb/gdb/dist/gdb/cli/cli-cmds.c:750:21: error: ‘pid_t vfork()’ is deprecated (declared at /usr/include/unistd.h:659) [-Werror=deprecated-declarations]
if ((pid = vfork ()) == 0)
^
Same problem.
*
/vol/src/gnu/gdb/gdb/dist/gdb/procfs.c: In function ‘void procfs_init_inferior(target_ops*, int)’:
/vol/src/gnu/gdb/gdb/dist/gdb/procfs.c:4380:30: error: ‘START_INFERIOR_TRAPS_EXPECTED’ was not declared in this scope
gdb_startup_inferior (pid, START_INFERIOR_TRAPS_EXPECTED);
^
defined in nat/fork-inferior.h, need to include that header
/vol/src/gnu/gdb/gdb/dist/gdb/procfs.c: In function ‘void procfs_create_inferior(target_ops*, const char*, const string&, char**, int)’:
/vol/src/gnu/gdb/gdb/dist/gdb/procfs.c:4605:38: error: ‘fork_inferior’ was not declared in this scope
NULL, NULL, shell_file, NULL);
^
likewise
/vol/src/gnu/gdb/gdb/dist/gdb/procfs.c: In function ‘void procfs_info_proc(target_ops*, const char*, info_proc_what)’:
/vol/src/gnu/gdb/gdb/dist/gdb/procfs.c:5124:20: error: ‘argv’ was not declared in this scope
for (char *arg : argv)
^
Typo, should be built_argv instead!
*
Undefined first referenced
symbol in file
fork_inferior(char const*, std::basic_string<char, std::char_traits<char>, std::allocator<char> > const&, char**, void (*)(), void (*)(int), void (*)(), char const*, void (*)(char const*, char* const*, char* const*)) procfs.o
startup_inferior(int, int, target_waitstatus*, ptid_t*) fork-child.o
ld: fatal: symbol referencing errors
collect2: error: ld returned 1 exit status
make[2]: *** [Makefile:2249: gdb] Error 1
Need to add fork-inferior.o to NATDEPFILES.
With the changes below, I can build gdb on sparcv9-sun-solaris2.11 and
amd64-pc-solaris2.11 and a simple smoke test (gdb/gdb gdb/gdb) works.
As the title says, this is a test case for
Inferior.thread_from_thread_handle, a python method which will,
given a thread library dependent thread handle, find the GDB thread
which corresponds to that thread handle (in the inferior under
consideration).
The C file for this test case causes the thread handles for the
main thread and two child threads to be placed into an array. The
test case runs to one of the functions (do_something()) at which point,
it retrieves the thread handles from the array and attempts to find the
corresponding thread in GDB's internal thread list.
I use barriers to make sure that both threads have actually started;
execution will stop when one of the threads breaks at do_something.
Thanks to Simon Marchi for suggestions for forcing the thread
numbering to be stable.
gdb/testsuite/ChangeLog:
* gdb.python/py-thrhandle.c, gdb.python/py-thrhandle.exp: New
files.
This patch adds support to remote targets for converting a thread
handle to a thread_info struct pointer.
A thread handle is fetched via a "handle" attribute which has been
added to the qXfer:threads:read query packet. An implementation is
provided in gdbserver for targets using the Linux kernel.
gdb/gdbserver/ChangeLog:
* linux-low.h (struct lwp_info): Add new field, thread_handle.
(thread_db_thread_handle): Declare.
* linux-low.c (linux_target_ops): Initialize thread_handle.
* server.c (handle_qxfer_threads_worker): Add support for
"handle" attribute.
* target.h (struct target_ops): Add new function pointer,
thread_handle.
(target_thread_handle): Define.
* thread-db.c (find_one_thread, attach_thread): Set thread_handle
field in lwp.
(thread_db_thread_handle): New function.
gdb/ChangeLog:
* remote.c (vector): Include.
(struct private_thread_info): Add field, thread_handle.
(free_private_thread_info): Deallocate storage associated with
thread handle.
(get_private_info_thread): Initialize `thread_handle' field.
(struct thread_item): Add field, thread_handle.
(clear_threads_listing_context): Deallocate storage associated
with thread handle.
(start_thread): Add support for "handle" attribute.
(thread_attributes): Add "handle".
(remote_get_threads_with_qthreadinfo): Initialize thread_handle
field.
(remote_update_thread_list): Update thread_handle.
(remote_thread_handle_to_thread_info): New function.
(init_remote_ops): Initialize to_thread_handle_to_thread_info.
While working on a patch for fetching a thread handle in gdbserver, I
ran into a circumstance in which tests in gdb.mi/mi-nsmoribund.exp
would occasionally fail. Over a large enough number of runs, it would
fail roughly 2% of the time.
That thread handle patch caused find_one_thread() to be called on
every stop. find_one_thread() calls td_ta_map_lwp2thr() which, in
turn, can cause ps_get_thread_area() to be called.
ps_get_thread_area() makes a call to ptrace() for getting the thread
area address. If this should happen when the thread is not stopped,
the call to ptrace will return error which in turn propogates back to
find_one_thread(). find_one_thread() calls error() in this instance
which causes the program to die.
This patch causes find_one_thread() to be called upon reciept of a
clone event. Since the clone is stopped, the circumstances described
above cannot occur.
gdb/gdbserver/ChangeLog:
* linux-low.c (handle_extended_wait): Call thread_db_notice_clone().
* linux-low.h (thread_db_notice_clone): Declare.
* thread-db.c (thread_db_notice_clone): New function.
This patch adds a target method named `to_thread_handle_to_thread_info'.
It is intended to map a thread library specific thread handle (such as
pthread_t for the pthread library) to the corresponding GDB internal
thread_info struct (pointer).
An implementation is provided for Linux pthreads; see linux-thread-db.c.
gdb/ChangeLog:
* target.h (struct target_ops): Add to_thread_handle_to_thread_info.
(target_thread_handle_to_thread_info): Declare.
* target.c (target_thread_handle_to_thread_info): New function.
* target-delegates.c: Regenerate.
* gdbthread.h (find_thread_by_handle): Declare.
* thread.c (find_thread_by_handle): New function.
* linux-thread-db.c (thread_db_thread_handle_to_thread_info): New
function.
(init_thread_db_ops): Register thread_db_thread_handle_to_thread_info.
Back in commit f0db101d98 ("gdbserver: don't pick a random thread if
the current thread dies"), a couple years ago, the last references to
set_desired_thread(0) [select the Hc thread] were removed, and all the
remaining calls to set_desired_thread pass '1', meaning general
thread. This means we can simplify set_desired_thread.
gdb/gdbserver/ChangeLog:
2017-09-21 Pedro Alves <palves@redhat.com>
* server.c (gdb_read_memory, handle_status, process_serial_event)
(handle_serial_event, handle_target_event): Adjust to
set_desired_thread prototype change.
* target.c (set_desired_thread): Remove 'use_general' parameter
and adjust.
* target.h (set_desired_thread): Remove 'use_general' parameter.
Clang gives this warning:
/home/emaisin/src/binutils-gdb/gdb/gdbserver/../nat/linux-waitpid.c:45:25: error: format string is not a string literal [-Werror,-Wformat-nonliteral]
vfprintf (stderr, format, args);
^~~~~~
Get rid of it by adding ATTRIBUTE_PRINTF.
gdb/ChangeLog:
* nat/linux-waitpid.c (linux_debug): Add ATTRIBUTE_PRINTF.
I am getting this warning with clang:
/home/emaisin/src/binutils-gdb/gdb/microblaze-tdep.c:94:28: error: format string is not a string literal [-Werror,-Wformat-nonliteral]
vprintf_unfiltered (fmt, args);
^~~
Adding ATTRIBUTE_PRINTF to microblaze_debug gets rid of it. Strangely,
gcc doesn't warn about non-literal format strings when calling vprintf
(or a vprintf-style function, like vprintf_unfiltered). I filed this
gcc bug:
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=82206
gdb/ChangeLog:
* microblaze-tdep.c (microblaze_debug): Add ATTRIBUTE_PRINTF.
I happen to see that fbsd-tdep.o is missing for target aarch64-freebsd,
and it causes the build failure,
aarch64-fbsd-tdep.o: In function `aarch64_fbsd_init_abi(gdbarch_info, gdbarch*)':
binutils-gdb/gdb/aarch64-fbsd-tdep.c:186: undefined reference to `fbsd_init_abi(gdbarch_info, gdbarch*)'
binutils-gdb/gdb/aarch64-fbsd-tdep.c:189: undefined reference to `svr4_lp64_fetch_link_map_offsets()'
binutils-gdb/gdb/aarch64-fbsd-tdep.c:189: undefined reference to `set_solib_svr4_fetch_link_map_offsets(gdbarch*, link_map_offsets* (*)())'
This patch fixed it.
gdb:
2017-09-21 Yao Qi <yao.qi@linaro.org>
* configure.tgt (aarch64*-*-freebsd*): Add fbsd-tdep.o solib-svr4.o
to gdb_target_obs.
This changes counted_command_line to be a typedef for std::shared_ptr
and removes the associated cleanups. In the long run I believe that
cmd_list_element should also be changed to use a shared_ptr.
gdb/ChangeLog
2017-09-20 Tom Tromey <tom@tromey.com>
* breakpoint.c (struct counted_command_line): Remove.
(breakpoint_commands): Update.
(alloc_counted_command_line, incref_counted_command_line)
(decref_counted_command_line, do_cleanup_counted_command_line)
(make_cleanup_decref_counted_command_line): Remove.
(breakpoint_set_commands, commands_command_1, ~bpstats, bpstats)
(bpstat_clear_actions, bpstat_do_actions_1, watchpoint_check)
(bpstat_stop_status, print_one_breakpoint_location, ~breakpoint)
(save_breakpoints): Update.
* breakpoint.h (counted_command_line): Now a typedef to
shared_ptr.
(struct breakpoint) <commands>: Now a counted_command_line.
(struct bpstats) <command>: Likewise.
This changes iterate_over_related_breakpoints and
map_breakpoint_numbers to take a function_view. Then, it simplifies
the callers by using lambdas. This then allows the removal of some
bookkeeping types.
gdb/ChangeLog
2017-09-20 Tom Tromey <tom@tromey.com>
* breakpoint.c (struct commands_info, do_map_commands_command):
Remove.
(commands_command_1): Update.
(iterate_over_related_breakpoints): Take a function_view.
(do_delete_breakpoint, do_map_delete_breakpoint): Remove.
(delete_command): Update.
(map_breakpoint_numbers): Take a function_view.
(do_disable_breakpoint, do_map_delete_breakpoint): Remove.
(disable_command): Update.
(do_enable_breakpoint, do_map_enable_breakpoint): Remove.
(enable_command): Update.
(struct disp_data, do_enable_breakpoint_disp)
(do_map_enable_once_breakpoint, do_map_enable_count_breakpoint)
(do_map_enable_delete_breakpoint): Remove.
(enable_once_command, enable_count_command, enable_delete_command)
(delete_trace_variable_command): Update.
This changes struct bpstats to be allocated with new and freed with
delete, adding constructors and a destructor in the process. This
allows the removal of one cleanup and clears the way for more to
follow.
gdb/ChangeLog
2017-09-20 Tom Tromey <tom@tromey.com>
* breakpoint.c (~bpstats): Rename from bpstat_free. Update.
(bpstat_clear): Use delete.
(bpstats): New constructors.
(bpstat_copy, bpstat_stop_status): Use new.
(dprintf_after_condition_true): Update.
* breakpoint.h (bpstats::bpstats): Add constructors.
(bpstats::~bpstats): Add destructor.
While working on the no-debug-info debugging improvements series, I
noticed these bare xfree calls, which lead to leaks if
evaluate_subexp_standard throws.
Fix that by reworking make_params as a RAII class. Ends up
eliminating a couple heap allocations too.
gdb/ChangeLog:
2017-09-20 Pedro Alves <palves@redhat.com>
* eval.c (make_params): Delete, refactored as ...
(class fake_method): ... this new type's ctor.
(fake_method::~fake_method): New.
(evaluate_subexp_standard): Use 'fake_method'.
This changes catch_command_errors_const to be an overload of
catch_command_errors, which may mildly help future constification
efforts.
Tested by rebuilding.
gdb/ChangeLog
2017-09-20 Tom Tromey <tom@tromey.com>
* main.c (catch_command_errors): Rename from
catch_command_errors_const.
(captured_main_1): Update.
Currently, with an ambiguous "list first,last", we get:
(gdb) list bar,main
Specified first line 'bar' is ambiguous:
file: "src/gdb/testsuite/gdb.cp/overload.cc", line number: 97
file: "src/gdb/testsuite/gdb.cp/overload.cc", line number: 98
This commit makes gdb's output above a bit clearer by printing the
symbol name as well:
(gdb) list bar,main
Specified first line 'bar' is ambiguous:
file: "src/gdb/testsuite/gdb.cp/overload.cc", line number: 97, symbol: "bar(A)"
file: "src/gdb/testsuite/gdb.cp/overload.cc", line number: 98, symbol: "bar(B)"
And while at it, makes gdb print the symbol name when actually listing
multiple locations too. I.e., before (with "set listsize 2"):
(gdb) list bar
file: "src/gdb/testsuite/gdb.cp/overload.cc", line number: 97
96
97 int bar (A) { return 11; }
file: "src/gdb/testsuite/gdb.cp/overload.cc", line number: 98
97 int bar (A) { return 11; }
98 int bar (B) { return 22; }
After:
(gdb) list bar
file: "src/gdb/testsuite/gdb.cp/overload.cc", line number: 97, symbol: "bar(A)"
96
97 int bar (A) { return 11; }
file: "src/gdb/testsuite/gdb.cp/overload.cc", line number: 98, symbol: "bar(B)"
97 int bar (A) { return 11; }
98 int bar (B) { return 22; }
Currently, the result of decoding a linespec loses information about
the original symbol that was found. All we end up with is an address.
This makes it difficult to find the original symbol again to get at
its print name. Fix that by storing a pointer to the symbol in the
sal. We already store the symtab and obj_section, so it feels like a
natural progression to me. This avoids having to do any extra symbol
lookup too.
gdb/ChangeLog:
2017-09-20 Pedro Alves <palves@redhat.com>
* cli/cli-cmds.c (list_command): Use print_sal_location.
(print_sal_location): New function.
(ambiguous_line_spec): Use print_sal_location.
* linespec.c (symbol_to_sal): Record the symbol in the sal.
* symtab.c (find_function_start_sal): Likewise.
* symtab.h (symtab_and_line::symbol): New field.
gdb/testsuite/ChangeLog:
2017-09-20 Pedro Alves <palves@redhat.com>
* gdb.base/list-ambiguous.exp (test_list_ambiguous_symbol): Expect
symbol names in gdb's output.
* gdb.cp/overload.exp ("list all overloads"): Likewise.
The "list" command allows specifying the name of variables as
argument, not just functions, so that users can type "list
a_global_variable".
That support is a broken when it comes to ambiguous locations though.
If there's more than one such global variable in the program, e.g.,
static globals in different compilation units, GDB ends up listing the
source of the first variable it finds, only.
linespec.c does find both symbol and minsym locations for all the
globals. The problem is that it ends up merging all the resulting
sals into one, because they all have address, zero. I.e., all sals
end up with sal.pc == 0, so maybe_add_address returns false for all
but the first.
The zero addresses appear because:
- in the minsyms case, linespec.c:minsym_found incorrectly treats all
minsyms as if they were function/text symbols. In list mode we can
end up with data symbols there, and we shouldn't be using
find_pc_sect_line on data symbols.
- in the debug symbols case, symbol_to_sal misses recording an address
(sal.pc) for non-block, non-label symbols.
gdb/ChangeLog:
2017-09-20 Pedro Alves <palves@redhat.com>
* linespec.c (minsym_found): Handle non-text minsyms.
(symbol_to_sal): Record a sal.pc for non-block, non-label symbols.
gdb/testsuite/ChangeLog:
2017-09-20 Pedro Alves <palves@redhat.com>
* gdb.base/list-ambiguous.exp (test_list_ambiguous_function):
Rename to ...
(test_list_ambiguous_symbol): ... this and add a symbol name
parameter. Adjust.
(test_list_ambiguous_function): Reimplement on top of
test_list_ambiguous_symbol and also test listing ambiguous
variables.
* gdb.base/list-ambiguous0.c (ambiguous): Rename to ...
(ambiguous_fun): ... this.
(ambiguous_var): New.
* gdb.base/list-ambiguous1.c (ambiguous): Rename to ...
(ambiguous_fun): ... this.
(ambiguous_var): New.
Tom Tromey
Pedro Alves
Simon Marchi
Doug Evans
Ulrich Weigand
Walfred Tedeschi
Sergio Durigan Junior
Matthias Klose
Rainer Orth
Thomas Preud'homme
Andreas Arnez
Kevin Buettner
Yao Qi