This patch teaches GDB to take advantage of target-assisted range
stepping. It adds a new 'r ADDR1,ADDR2' action to vCont (vCont;r),
meaning, "step once, and keep stepping as long as the thread is in the
[ADDR1,ADDR2) range".
Rationale:
When user issues the "step" command on the following line of source,
a = b + c + d * e - a;
GDB single-steps every single instruction until the program reaches a
new different line. E.g., on x86_64, that line compiles to:
0x08048434 <+65>: mov 0x1c(%esp),%eax
0x08048438 <+69>: mov 0x30(%esp),%edx
0x0804843c <+73>: add %eax,%edx
0x0804843e <+75>: mov 0x18(%esp),%eax
0x08048442 <+79>: imul 0x2c(%esp),%eax
0x08048447 <+84>: add %edx,%eax
0x08048449 <+86>: sub 0x34(%esp),%eax
0x0804844d <+90>: mov %eax,0x34(%esp)
0x08048451 <+94>: mov 0x1c(%esp),%eax
and the following is the RSP traffic between GDB and GDBserver:
--> vCont;s:p2e13.2e13;c
<-- T0505:68efffbf;04:30efffbf;08:3c840408;thread:p2e13.2e13;core:1;
--> vCont;s:p2e13.2e13;c
<-- T0505:68efffbf;04:30efffbf;08:3e840408;thread:p2e13.2e13;core:2;
--> vCont;s:p2e13.2e13;c
<-- T0505:68efffbf;04:30efffbf;08:42840408;thread:p2e13.2e13;core:2;
--> vCont;s:p2e13.2e13;c
<-- T0505:68efffbf;04:30efffbf;08:47840408;thread:p2e13.2e13;core:0;
--> vCont;s:p2e13.2e13;c
<-- T0505:68efffbf;04:30efffbf;08:49840408;thread:p2e13.2e13;core:0;
--> vCont;s:p2e13.2e13;c
<-- T0505:68efffbf;04:30efffbf;08:4d840408;thread:p2e13.2e13;core:0;
--> vCont;s:p2e13.2e13;c
<-- T0505:68efffbf;04:30efffbf;08:51840408;thread:p2e13.2e13;core:0;
IOW, a lot of roundtrips between GDB and GDBserver.
If we add a new command to the RSP, meaning "keep stepping and don't
report a stop until the program goes out of the [0x08048434,
0x08048451) address range", then the RSP traffic can be reduced down
to:
--> vCont;r8048434,8048451:p2db0.2db0;c
<-- T0505:68efffbf;04:30efffbf;08:51840408;thread:p2db0.2db0;core:1;
As number of packets is reduced dramatically, the performance of
stepping source lines is much improved.
In case something is wrong with range stepping on the stub side, the
debug info or even gdb, this adds a "set/show range-stepping" command
to be able to turn range stepping off.
gdb/
2013-05-23 Yao Qi <yao@codesourcery.com>
Pedro Alves <palves@redhat.com>
* gdbthread.h (struct thread_control_state) <may_range_step>: New
field.
* infcmd.c (step_once, until_next_command): Enable range stepping.
* infrun.c (displaced_step_prepare): Disable range stepping.
(resume): Disable range stepping if stepping over a breakpoint or
we have software watchpoints. If range stepping is enabled,
assert the thread is in the stepping range.
(clear_proceed_status_thread): Clear may_range_step.
(handle_inferior_event): Disable range stepping as soon as we know
the thread that hit the event. Re-enable it whenever we're going
to step with a step range.
* remote.c (struct vCont_action_support) <r>: New field.
(use_range_stepping): New global.
(remote_vcont_probe): Handle 'r' action.
(append_resumption): Append an 'r' action if the thread may range
step.
(show_range_stepping): New function.
(set_range_stepping): New function.
(_initialize_remote): Call add_setshow_boolean_cmd to register the
'set range-stepping' and 'show range-stepping' commands.
* NEWS: Mention range stepping, the new vCont;r action, and the
new "set/show range-stepping" commands.
gdb/doc/
2013-05-23 Yao Qi <yao@codesourcery.com>
Pedro Alves <palves@redhat.com>
* gdb.texinfo (Packets): Document 'vCont;r'.
(Continuing and Stepping): Document target-assisted range
stepping, and the 'set range-stepping' and 'show range-stepping'
commands.
This adds a function for doing within-thread's-stepping-range checks,
and converts a couple spots to use it. Following patches will add
more uses.
gdb/
2013-05-23 Yao Qi <yao@codesourcery.com>
Pedro Alves <palves@redhat.com>
* gdbthread.h (pc_in_thread_step_range): New declaration.
* thread.c (pc_in_thread_step_range): New function.
* infrun.c (handle_inferior_event): Use it.
Two modifications:
1. The addition of 2013 to the copyright year range for every file;
2. The use of a single year range, instead of potentially multiple
year ranges, as approved by the FSF.
2012-06-28 Jan Kratochvil <jan.kratochvil@redhat.com>
Pedro Alves <palves@redhat.com>
* gdbthread.h (ALL_THREADS): New macro.
(thread_list): Declare.
* infrun.c (handle_inferior_event) <spurious signal>: Don't keep
going, but instead fall through to the stepping handling.
* linux-nat.c (resume_lwp): New parameter 'signo'. Resume with
the passed in signal. Adjust debug output.
(resume_callback): Rename to ...
(linux_nat_resume_callback): ... this. Pass the thread's last
stop signal, if in "pass" state.
(linux_nat_resume): Adjust to rename.
(stop_wait_callback): New assertion. Don't respawn signals;
instead let the LWP remain with SIGNALLED set.
(linux_nat_wait_1): Remove flushing of pending SIGSTOPs.
* remote.c (append_pending_thread_resumptions): New.
(remote_vcont_resume): Call it.
* target.h (target_resume): Extend comment.
gdb/testsuite/
2012-06-28 Jan Kratochvil <jan.kratochvil@redhat.com>
Pedro Alves <palves@redhat.com>
* gdb.threads/siginfo-threads.exp: New file.
* gdb.threads/siginfo-threads.c: New file.
* gdb.threads/sigstep-threads.exp: New file.
* gdb.threads/sigstep-threads.c: New file.
Remove stale dummy frames.
* breakpoint.c: Include dummy-frame.h.
(longjmp_breakpoint_ops): New variable.
(update_breakpoints_after_exec, breakpoint_init_inferior): Delete also
bp_longjmp_call_dummy.
(bpstat_what, bptype_string, print_one_breakpoint_location)
(init_bp_location): Support bp_longjmp_call_dummy.
(set_longjmp_breakpoint): Use longjmp_breakpoint_ops. Comment why.
(set_longjmp_breakpoint_for_call_dummy)
(check_longjmp_breakpoint_for_call_dummy, longjmp_bkpt_dtor): New
functions.
(initialize_breakpoint_ops): Initialize longjmp_breakpoint_ops.
* breakpoint.h (enum bptype): New item bp_longjmp_call_dummy. Delete
FIXME comment and extend the other comment for bp_call_dummy.
(set_longjmp_breakpoint_for_call_dummy)
(check_longjmp_breakpoint_for_call_dummy): New declarations.
* dummy-frame.c: Include gdbthread.h.
(pop_dummy_frame_bpt): New function.
(pop_dummy_frame): Call pop_dummy_frame_bpt.
(dummy_frame_discard): New function.
(cleanup_dummy_frames): Update the comment about longjmps.
* dummy-frame.h (dummy_frame_discard): New declaration.
* gdbthread.h (struct thread_info): Extend initiating_frame comment.
* infcall.c (call_function_by_hand): New variable longjmp_b. Call
set_longjmp_breakpoint_for_call_dummy. Chain its breakpoints with BPT.
* infrun.c (handle_inferior_event) <BPSTAT_WHAT_CLEAR_LONGJMP_RESUME>:
Add case 4 comment. Call check_longjmp_breakpoint_for_call_dummy and
keep_going if IS_LONGJMP and there is no other reason to stop.
gdb/testsuite/
Remove stale dummy frames.
* gdb.base/call-signal-resume.exp (maintenance print dummy-frames)
(maintenance info breakpoints): New tests.
* gdb.base/stale-infcall.c: New file.
* gdb.base/stale-infcall.exp: New file.
* thread.c (any_live_thread_of_process): Prioritize threads
that are not executing.
* gdbthread.h (any_live_thread_of_process): Update comment
as per above change.
* gdbthread.h (print_thread_info): Change prototype.
* thread.c (print_thread_info): Accept char* instead of int for
requested_threads argument. Use new function number_is_in_list
to determine which threads to list.
(info_threads_command): Pass char* to print_thread_info.
* cli/cli-utils.c (number_is_in_list): New function.
* cli/cli-utils.h (number_is_in_list): Export.
* mi/mi-main.c (mi_cmd_thread_info): Pass char* to
print_thread_info.
(print_one_inferior): Ditto.
(mi_cmd_list_thread_groups): Ditto.
2011-02-21 Michael Snyder <msnyder@vmware.com>
* gdb.threads/thread-find.exp: Update patterns for changes in
output of "info threads" command.
Fix step_resume_breakpoint unsaved during an infcall.
* gdbthread.h (struct thread_control_state): Move here field
step_resume_breakpoint ...
(struct thread_info): ... from here.
* infrun.c (save_infcall_control_state): Reset
control.step_resume_breakpoint to NULL.
(restore_infcall_control_state, discard_infcall_control_state): Delete
control.step_resume_breakpoint.
* arm-linux-tdep.c, infrun.c, thread.c: Update all the references to
the moved field.
gdb/testsuite/
Fix step_resume_breakpoint unsaved during an infcall.
* gdb.base/step-resume-infcall.exp: New file.
* gdb.base/step-resume-infcall.c: New file.
Rename and move inferior_thread_state and inferior_status.
* gdbthread.h (struct thread_control_state): New struct, move fields
step_range_start, step_range_end, step_frame_id, step_stack_frame_id,
trap_expected, proceed_to_finish, in_infcall, step_over_calls,
stop_step and stop_bpstat here from struct thread_info.
(struct thread_suspend_state): New struct, move field stop_signal here
from struct thread_info.
(struct thread_info): Move the fields above from this struct.
* inferior.h: Move the inferior_thread_state and inferior_status
declarations comment to their definitions at infrun.c.
(struct inferior_control_state): New struct, move field stop_soon from
struct inferior here.
(struct inferior_suspend_state): New empty struct.
(struct inferior): New fields control and suspend. Move out field
stop_soon.
* infrun.c (struct inferior_thread_state): Rename to ...
(infcall_suspend_state): ... here. Replace field stop_signal by
fields thread_suspend and inferior_suspend.
(save_inferior_thread_state): Rename to ...
(save_infcall_suspend_state): ... here. New variable inf. Update the
code for new fields.
(restore_inferior_thread_state): Rename to ...
(restore_infcall_suspend_state): ... here. New variable inf. Update
the code for new fields.
(do_restore_inferior_thread_state_cleanup): Rename to ...
(do_restore_infcall_suspend_state_cleanup): ... here.
(make_cleanup_restore_inferior_thread_state): Rename to ...
(make_cleanup_restore_infcall_suspend_state): ... here.
(discard_inferior_thread_state): Rename to ...
(discard_infcall_suspend_state): ... here.
(get_inferior_thread_state_regcache): Rename to ...
(get_infcall_suspend_state_regcache): ... here.
(struct inferior_status): Rename to ...
(struct infcall_control_state): ... here. Replace fields
step_range_start, step_range_end, step_frame_id, step_stack_frame_id,
trap_expected, proceed_to_finish, in_infcall, step_over_calls,
stop_step, stop_bpstat and stop_soon by fields thread_control and
inferior_control.
(save_inferior_status): Rename to ...
(save_infcall_control_state): ... here. Update the code for new
fields.
(restore_inferior_status): Rename to ...
(restore_infcall_control_state): ... here. Update the code for new
fields.
(do_restore_inferior_status_cleanup): Rename to ...
(do_restore_infcall_control_state_cleanup): ... here.
(make_cleanup_restore_inferior_status): Rename to ...
(make_cleanup_restore_infcall_control_state): ... here.
(discard_inferior_status): Rename to ...
(discard_infcall_control_state): ... here.
* alpha-tdep.c, breakpoint.c, dummy-frame.c, dummy-frame.h,
exceptions.c, fbsd-nat.c, gdbthread.h, infcall.c, infcmd.c,
inferior.c, inferior.h, infrun.c, linux-nat.c, mi/mi-interp.c,
mips-tdep.c, procfs.c, solib-irix.c, solib-osf.c, solib-spu.c,
solib-sunos.c, solib-svr4.c, thread.c, windows-nat.c: Update all the
references to the moved fields and renamed functions.
Revert:
2010-10-17 Jan Kratochvil <jan.kratochvil@redhat.com>
Pedro Alves <pedro@codesourcery.com>
* gdbthread.h (currently_stepping): New declaration.
* infrun.c (currently_stepping): Remove the forward declaration.
(currently_stepping): Make it global.
* linux-nat.c (resume_callback) <lp->stopped && lp->status == 0>: New
variables tp and step, initialized them. Pass STEP to to_resume.
Print also possibly "PTRACE_SINGLESTEP" if STEP. Initialize LP->STEP.
* remote.c (currently_stepping_callback): New.
(remote_vcont_resume)
<ptid_equal (ptid, minus_one_ptid) || ptid_is_pid (ptid)>:
New variable tp. Call currently_stepping_callback and step such
thread.
gdb/testsuite/
Revert:
2010-10-17 Jan Kratochvil <jan.kratochvil@redhat.com>
* gdb.threads/sigstep-threads.exp: New file.
* gdb.threads/sigstep-threads.c: New file.
Stan Shebs <stan@codesourcery.com>
Add base multi-executable/process support to GDB.
gdb/
* Makefile.in (SFILES): Add progspace.c.
(COMMON_OBS): Add progspace.o.
* progspace.h: New.
* progspace.c: New.
* breakpoint.h (struct bp_target_info) <placed_address_space>: New
field.
(struct bp_location) <pspace>: New field.
(struct breakpoint) <pspace>: New field.
(bpstat_stop_status, breakpoint_here_p)
(moribund_breakpoint_here_p, breakpoint_inserted_here_p)
(regular_breakpoint_inserted_here_p)
(software_breakpoint_inserted_here_p, breakpoint_thread_match)
(set_default_breakpoint): Adjust prototypes.
(remove_breakpoints_pid, breakpoint_program_space_exit): Declare.
(insert_single_step_breakpoint, deprecated_insert_raw_breakpoint):
Adjust prototypes.
* breakpoint.c (executing_startup): Delete.
(default_breakpoint_sspace): New.
(breakpoint_restore_shadows): Skip if the address space doesn't
match.
(update_watchpoint): Record the frame's program space in the
breakpoint location.
(insert_bp_location): Record the address space in target_info.
Adjust to pass the symbol space to solib_name_from_address.
(breakpoint_program_space_exit): New.
(insert_breakpoint_locations): Switch the symbol space and thread
when inserting breakpoints. Don't insert breakpoints in a vfork
parent waiting for vfork done if we're not attached to the vfork
child.
(remove_breakpoints_pid): New.
(reattach_breakpoints): Switch to a thread of PID. Ignore
breakpoints of other symbol spaces.
(create_internal_breakpoint): Store the symbol space in the sal.
(create_longjmp_master_breakpoint): Iterate over all symbol
spaces.
(update_breakpoints_after_exec): Ignore breakpoints for other
symbol spaces.
(remove_breakpoint): Rename to ...
(remove_breakpoint_1): ... this. Pass the breakpoints symbol
space to solib_name_from_address.
(remove_breakpoint): New.
(mark_breakpoints_out): Ignore breakpoints from other symbol
spaces.
(breakpoint_init_inferior): Ditto.
(breakpoint_here_p): Add an address space argument and adjust to
use breakpoint_address_match.
(moribund_breakpoint_here_p): Ditto.
(regular_breakpoint_inserted_here_p): Ditto.
(breakpoint_inserted_here_p): Ditto.
(software_breakpoint_inserted_here_p): Ditto.
(breakpoint_thread_match): Ditto.
(bpstat_check_location): Ditto.
(bpstat_stop_status): Ditto.
(print_breakpoint_location): If there's a location to print,
switch the current symbol space.
(print_one_breakpoint_location): Add `allflag' argument.
(print_one_breakpoint): Ditto. Adjust.
(do_captured_breakpoint_query): Adjust.
(breakpoint_1): Adjust.
(breakpoint_has_pc): Also match the symbol space.
(describe_other_breakpoints): Add a symbol space argument and
adjust.
(set_default_breakpoint): Add a symbol space argument. Set
default_breakpoint_sspace.
(breakpoint_address_match): New.
(check_duplicates_for): Add an address space argument, and adjust.
(set_raw_breakpoint): Record the symbol space in the location and
in the breakpoint.
(set_longjmp_breakpoint): Skip longjmp master breakpoints from
other symbol spaces.
(remove_thread_event_breakpoints, remove_solib_event_breakpoints)
(disable_breakpoints_in_shlibs): Skip breakpoints from other
symbol spaces.
(disable_breakpoints_in_unloaded_shlib): Match symbol spaces.
(create_catchpoint): Set the symbol space in the sal.
(disable_breakpoints_before_startup): Skip breakpoints from other
symbol spaces. Set executing_startup in the current symbol space.
(enable_breakpoints_after_startup): Clear executing_startup in the
current symbol space. Skip breakpoints from other symbol spaces.
(clone_momentary_breakpoint): Also copy the symbol space.
(add_location_to_breakpoint): Set the location's symbol space.
(bp_loc_is_permanent): Switch thread and symbol space.
(create_breakpoint): Adjust.
(expand_line_sal_maybe): Expand comment to mention symbol spaces.
Switch thread and symbol space when reading memory.
(parse_breakpoint_sals): Set the symbol space in the sal.
(break_command_really): Ditto.
(skip_prologue_sal): Switch and space.
(resolve_sal_pc): Ditto.
(watch_command_1): Record the symbol space in the sal.
(create_ada_exception_breakpoint): Adjust.
(clear_command): Adjust. Match symbol spaces.
(update_global_location_list): Use breakpoint_address_match.
(breakpoint_re_set_one): Switch thread and space.
(breakpoint_re_set): Save symbol space.
(breakpoint_re_set_thread): Also reset the symbol space.
(deprecated_insert_raw_breakpoint): Add an address space argument.
Adjust.
(insert_single_step_breakpoint): Ditto.
(single_step_breakpoint_inserted_here_p): Ditto.
(clear_syscall_counts): New.
(_initialize_breakpoint): Install it as inferior_exit observer.
* exec.h: Include "progspace.h".
(exec_bfd, exec_bfd_mtime): New defines.
(exec_close): Declare.
* exec.c: Include "gdbthread.h" and "progspace.h".
(exec_bfd, exec_bfd_mtime, current_target_sections_1): Delete.
(using_exec_ops): New.
(exec_close_1): Rename to exec_close, and make public.
(exec_close): Rename to exec_close_1, and adjust all callers. Add
description. Remove target sections and close executables from
all program spaces.
(exec_file_attach): Add comment.
(add_target_sections): Check on `using_exec_ops' to check if the
target should be pushed.
(remove_target_sections): Only unpush the target if there are no
more target sections in any symbol space.
* gdbcore.h: Include "exec.h".
(exec_bfd, exec_bfd_mtime): Remove declarations.
* frame.h (get_frame_program_space, get_frame_address_space)
(frame_unwind_program_space): Declare.
* frame.c (struct frame_info) <pspace, aspace>: New fields.
(create_sentinel_frame): Add program space argument. Set the
pspace and aspace fields of the frame object.
(get_current_frame, create_new_frame): Adjust.
(get_frame_program_space): New.
(frame_unwind_program_space): New.
(get_frame_address_space): New.
* stack.c (print_frame_info): Adjust.
(print_frame): Use the frame's program space.
* gdbthread.h (any_live_thread_of_process): Declare.
* thread.c (any_live_thread_of_process): New.
(switch_to_thread): Switch the program space as well.
(restore_selected_frame): Don't warn if trying to restore frame
level 0.
* inferior.h: Include "progspace.h".
(detach_fork): Declare.
(struct inferior) <removable, aspace, pspace>
<vfork_parent, vfork_child, pending_detach>
<waiting_for_vfork_done>: New fields.
<terminal_info>: Remove field.
<data, num_data>: New fields.
(register_inferior_data, register_inferior_data_with_cleanup)
(clear_inferior_data, set_inferior_data, inferior_data): Declare.
(exit_inferior, exit_inferior_silent, exit_inferior_num_silent)
(inferior_appeared): Declare.
(find_inferior_pid): Typo.
(find_inferior_id, find_inferior_for_program_space): Declare.
(set_current_inferior, save_current_inferior, prune_inferiors)
(number_of_inferiors): Declare.
(inferior_list): Declare.
* inferior.c: Include "gdbcore.h" and "symfile.h".
(inferior_list): Make public.
(delete_inferior_1): Always delete thread silently.
(find_inferior_id): Make public.
(current_inferior_): New.
(current_inferior): Use it.
(set_current_inferior): New.
(restore_inferior): New.
(save_current_inferior): New.
(free_inferior): Free the per-inferior data.
(add_inferior_silent): Allocate per-inferior data.
Call inferior_appeared.
(delete_threads_of_inferior): New.
(delete_inferior_1): Adjust interface to take an inferior pointer.
(delete_inferior): Adjust.
(delete_inferior_silent): Adjust.
(exit_inferior_1): New.
(exit_inferior): New.
(exit_inferior_silent): New.
(exit_inferior_num_silent): New.
(detach_inferior): Adjust.
(inferior_appeared): New.
(discard_all_inferiors): Adjust.
(find_inferior_id): Make public. Assert pid is not zero.
(find_inferior_for_program_space): New.
(have_inferiors): Check if we have any inferior with pid not zero.
(have_live_inferiors): Go over all pushed targets looking for
process_stratum.
(prune_inferiors): New.
(number_of_inferiors): New.
(print_inferior): Add executable column. Print vfork parent/child
relationships.
(inferior_command): Adjust to cope with not running inferiors.
(remove_inferior_command): New.
(add_inferior_command): New.
(clone_inferior_command): New.
(struct inferior_data): New.
(struct inferior_data_registration): New.
(struct inferior_data_registry): New.
(inferior_data_registry): New.
(register_inferior_data_with_cleanup): New.
(register_inferior_data): New.
(inferior_alloc_data): New.
(inferior_free_data): New.
(clear_inferior_data): New.
(set_inferior_data): New.
(inferior_data): New.
(initialize_inferiors): New.
(_initialize_inferiors): Register "add-inferior",
"remove-inferior" and "clone-inferior" commands.
* objfiles.h: Include "progspace.h".
(struct objfile) <pspace>: New field.
(symfile_objfile, object_files): Don't declare.
(ALL_PSPACE_OBJFILES): New.
(ALL_PSPACE_OBJFILES_SAFE): New.
(ALL_OBJFILES, ALL_OBJFILES_SAFE): Adjust.
(ALL_PSPACE_SYMTABS): New.
(ALL_PRIMARY_SYMTABS): Adjust.
(ALL_PSPACE_PRIMARY_SYMTABS): New.
(ALL_PSYMTABS): Adjust.
(ALL_PSPACE_PSYMTABS): New.
* objfiles.c (object_files, symfile_objfile): Delete.
(struct objfile_sspace_info): New.
(objfiles_pspace_data): New.
(objfiles_pspace_data_cleanup): New.
(get_objfile_pspace_data): New.
(objfiles_changed_p): Delete.
(allocate_objfile): Set the objfile's program space. Adjust to
reference objfiles_changed_p in pspace data.
(free_objfile): Adjust to reference objfiles_changed_p in pspace
data.
(objfile_relocate): Ditto.
(update_section_map): Add pspace argument. Adjust to iterate over
objfiles in the passed in pspace.
(find_pc_section): Delete sections and num_sections statics.
Adjust to refer to program space's objfiles_changed_p. Adjust to
refer to sections and num_sections store in the objfile's pspace
data.
(objfiles_changed): Adjust to reference objfiles_changed_p in
pspace data.
(_initialize_objfiles): New.
* linespec.c (decode_all_digits, decode_dollar): Set the sal's
program space.
* source.c (current_source_pspace): New.
(get_current_source_symtab_and_line): Set the sal's program space.
(set_current_source_symtab_and_line): Set current_source_pspace.
(select_source_symtab): Ditto. Use ALL_OBJFILES.
(forget_cached_source_info): Iterate over all program spaces.
* symfile.c (clear_symtab_users): Adjust.
* symmisc.c (print_symbol_bcache_statistics): Iterate over all
program spaces.
(print_objfile_statistics): Ditto.
(maintenance_print_msymbols): Ditto.
(maintenance_print_objfiles): Ditto.
(maintenance_info_symtabs): Ditto.
(maintenance_info_psymtabs): Ditto.
* symtab.h (SYMTAB_PSPACE): New.
(struct symtab_and_line) <pspace>: New field.
* symtab.c (init_sal): Clear the sal's program space.
(find_pc_sect_symtab): Set the sal's program space. Switch thread
and space.
(append_expanded_sal): Add program space argument. Iterate over
all program spaces.
(expand_line_sal): Iterate over all program spaces. Switch
program space.
* target.h (enum target_waitkind) <TARGET_WAITKIND_VFORK_DONE>: New.
(struct target_ops) <to_thread_address_space>: New field.
(target_thread_address_space): Define.
* target.c (target_detach): Only remove breakpoints from the
inferior we're detaching.
(target_thread_address_space): New.
* defs.h (initialize_progspace): Declare.
* top.c (gdb_init): Call it.
* solist.h (struct so_list) <sspace>: New field.
* solib.h (struct program_space): Forward declare.
(solib_name_from_address): Adjust prototype.
* solib.c (so_list_head): Replace with a macro referencing the
program space.
(update_solib_list): Set the so's program space.
(solib_name_from_address): Add a program space argument and adjust.
* solib-svr4.c (struct svr4_info) <pid>: Delete field.
<interp_text_sect_low, interp_text_sect_high, interp_plt_sect_low>
<interp_plt_sect_high>: New fields.
(svr4_info_p, svr4_info): Delete.
(solib_svr4_sspace_data): New.
(get_svr4_info): Rewrite.
(svr4_sspace_data_cleanup): New.
(open_symbol_file_object): Adjust.
(svr4_default_sos): Adjust.
(svr4_fetch_objfile_link_map): Adjust.
(interp_text_sect_low, interp_text_sect_high, interp_plt_sect_low)
(interp_plt_sect_high): Delete.
(svr4_in_dynsym_resolve_code): Adjust.
(enable_break): Adjust.
(svr4_clear_solib): Revert bit that removed the svr4_info here,
and reinstate clearing debug_base, debug_loader_offset_p,
debug_loader_offset and debug_loader_name.
(_initialize_svr4_solib): Register solib_svr4_pspace_data. Don't
install an inferior_exit observer anymore.
* printcmd.c (struct display) <pspace>: New field.
(display_command): Set the display's sspace.
(do_one_display): Match the display's sspace.
(display_uses_solib_p): Ditto.
* linux-fork.c (detach_fork): Moved to infrun.c.
(_initialize_linux_fork): Moved "detach-on-fork" command to
infrun.c.
* infrun.c (detach_fork): Moved from linux-fork.c.
(proceed_after_vfork_done): New.
(handle_vfork_child_exec_or_exit): New.
(follow_exec_mode_replace, follow_exec_mode_keep)
(follow_exec_mode_names, follow_exec_mode_string)
(show_follow_exec_mode_string): New.
(follow_exec): New. Reinstate the mark_breakpoints_out call.
Remove shared libraries before attaching new executable. If user
wants to keep the inferior, keep it.
(displaced_step_fixup): Adjust to pass an address space to the
breakpoints module.
(resume): Ditto.
(clear_proceed_status): In all-stop mode, always clear the proceed
status of all threads.
(prepare_to_proceed): Adjust to pass an address space to the
breakpoints module.
(proceed): Ditto.
(adjust_pc_after_break): Ditto.
(handle_inferior_event): When handling a process exit, switch the
program space to the inferior's that had exited. Call
handle_vfork_child_exec_or_exit. Adjust to pass an address space
to the breakpoints module. In non-stop mode, when following a
fork and detach-fork is off, also resume the other branch. Handle
TARGET_WAITKIND_VFORK_DONE. Set the program space in sals.
(normal_stop): Prune inferiors.
(_initialize_infrun): Install the new "follow-exec-mode" command.
"detach-on-fork" moved here.
* regcache.h (get_regcache_aspace): Declare.
* regcache.c (struct regcache) <aspace>: New field.
(regcache_xmalloc): Clear the aspace.
(get_regcache_aspace): New.
(regcache_cpy): Copy the aspace field.
(regcache_cpy_no_passthrough): Ditto.
(get_thread_regcache): Fetch the thread's address space from the
target, and store it in the regcache.
* infcall.c (call_function_by_hand): Set the sal's pspace.
* arch-utils.c (default_has_shared_address_space): New.
* arch-utils.h (default_has_shared_address_space): Declare.
* gdbarch.sh (has_shared_address_space): New.
* gdbarch.h, gdbarch.c: Regenerate.
* linux-tdep.c: Include auxv.h, target.h, elf/common.h.
(linux_has_shared_address_space): New.
(_initialize_linux_tdep): Declare.
* arm-tdep.c (arm_software_single_step): Pass the frame's address
space to insert_single_step_breakpoint.
* arm-linux-tdep.c (arm_linux_software_single_step): Pass the
frame's pspace to breakpoint functions.
* cris-tdep.c (crisv32_single_step_through_delay): Ditto.
(cris_software_single_step): Ditto.
* mips-tdep.c (deal_with_atomic_sequence): Add frame argument.
Pass the frame's pspace to breakpoint functions.
(mips_software_single_step): Adjust.
(mips_single_step_through_delay): Adjust.
* rs6000-aix-tdep.c (rs6000_software_single_step): Adjust.
* rs6000-tdep.c (ppc_deal_with_atomic_sequence): Adjust.
* solib-irix.c (enable_break): Adjust to pass the current frame's
address space to breakpoint functions.
* sparc-tdep.c (sparc_software_single_step): Ditto.
* spu-tdep.c (spu_software_single_step): Ditto.
* alpha-tdep.c (alpha_software_single_step): Ditto.
* record.c (record_wait): Adjust to pass an address space to the
breakpoints module.
* fork-child.c (fork_inferior): Set the new inferior's program and
address spaces.
* inf-ptrace.c (inf_ptrace_follow_fork): Copy the parent's program
and address spaces.
(inf_ptrace_attach): Set the inferior's program and address spaces.
* linux-nat.c: Include "solib.h".
(linux_child_follow_fork): Manage parent and child's program and
address spaces. Clone the parent's program space if necessary.
Don't wait for the vfork to be done here. Refuse to resume if
following the vfork parent while leaving the child stopped.
(resume_callback): Don't resume a vfork parent.
(linux_nat_resume): Also check for pending events in the
lp->waitstatus field.
(linux_handle_extended_wait): Report TARGET_WAITKIND_VFORK_DONE
events to the core.
(stop_wait_callback): Don't wait for SIGSTOP on vfork parents.
(cancel_breakpoint): Adjust.
* linux-thread-db.c (thread_db_wait): Don't remove thread event
breakpoints here.
(thread_db_mourn_inferior): Don't mark breakpoints out here.
Remove thread event breakpoints after mourning.
* corelow.c: Include progspace.h.
(core_open): Set the inferior's program and address spaces.
* remote.c (remote_add_inferior): Set the new inferior's program
and address spaces.
(remote_start_remote): Update address spaces.
(extended_remote_create_inferior_1): Don't init the thread list if
we already debugging other inferiors.
* darwin-nat.c (darwin_attach): Set the new inferior's program and
address spaces.
* gnu-nat.c (gnu_attach): Ditto.
* go32-nat.c (go32_create_inferior): Ditto.
* inf-ttrace.c (inf_ttrace_follow_fork, inf_ttrace_attach): Ditto.
* monitor.c (monitor_open): Ditto.
* nto-procfs.c (procfs_attach, procfs_create_inferior): Ditto.
* procfs.c (do_attach): Ditto.
* windows-nat.c (do_initial_windows_stuff): Ditto.
* inflow.c (inferior_process_group)
(terminal_init_inferior_with_pgrp, terminal_inferior,
(terminal_ours_1, inflow_inferior_exit, copy_terminal_info)
(child_terminal_info, new_tty_postfork, set_sigint_trap): Adjust
to use per-inferior data instead of inferior->terminal_info.
(inflow_inferior_data): New.
(inflow_new_inferior): Delete.
(inflow_inferior_data_cleanup): New.
(get_inflow_inferior_data): New.
* mi/mi-interp.c (mi_new_inferior): Rename to...
(mi_inferior_appeared): ... this.
(mi_interpreter_init): Adjust.
* tui/tui-disasm.c: Include "progspace.h".
(tui_set_disassem_content): Pass an address space to
breakpoint_here_p.
* NEWS: Mention multi-program debugging support. Mention new
commands "add-inferior", "clone-inferior", "remove-inferior",
"maint info program-spaces", and new option "set
follow-exec-mode".
2009-10-19 Pedro Alves <pedro@codesourcery.com>
Stan Shebs <stan@codesourcery.com>
gdb/doc/
* observer.texi (new_inferior): Rename to...
(inferior_appeared): ... this.
2009-10-19 Pedro Alves <pedro@codesourcery.com>
Stan Shebs <stan@codesourcery.com>
gdb/testsuite/
* gdb.base/foll-vfork.exp: Adjust to spell out "follow-fork".
* gdb.base/foll-exec.exp: Adjust to expect a process id before
"Executing new program".
* gdb.base/foll-fork.exp: Adjust to spell out "follow-fork".
* gdb.base/multi-forks.exp: Ditto. Adjust to the inferior being
left listed after having been killed.
* gdb.base/attach.exp: Adjust to spell out "symbol-file".
* gdb.base/maint.exp: Adjust test.
* Makefile.in (ALL_SUBDIRS): Add gdb.multi.
* gdb.multi/Makefile.in: New.
* gdb.multi/base.exp: New.
* gdb.multi/goodbye.c: New.
* gdb.multi/hangout.c: New.
* gdb.multi/hello.c: New.
* gdb.multi/bkpt-multi-exec.c: New.
* gdb.multi/bkpt-multi-exec.exp: New.
* gdb.multi/crashme.c: New.
2009-10-19 Pedro Alves <pedro@codesourcery.com>
Stan Shebs <stan@codesourcery.com>
gdb/doc/
* gdb.texinfo (Inferiors): Rename node to ...
(Inferiors and Programs): ... this. Mention running multiple
programs in the same debug session.
<info inferiors>: Mention the new 'Executable' column if "info
inferiors". Update examples. Document the "add-inferior",
"clone-inferior", "remove-inferior" and "maint info
program-spaces" commands.
(Process): Rename node to...
(Forks): ... this. Document "set|show follow-exec-mode".
2009-07-02 Pedro Alves <pedro@codesourcery.com>
* linux-nat.c (linux_child_follow_fork): If we're staying attached
to the child process, enable event reporting on it. Don't handle
checkpoints here. Instead, add the child fork to the lwp thread
and inferior lists without clobbering the previous inferior. Let
the thread_db layer learn about a new child process, even if
following the parent.
(linux_nat_switch_fork): Delete lwps of the current inferior only,
instead of clearing the whole list. Use thread_change_ptid to
give the core the illusion the new checkpoint is still the same
inferior. Clear the register cache.
(linux_handle_extended_wait): Handle checkpoints here.
(linux_multi_process): Turn on.
* linux-fork.c (struct fork_info) <pc>: Remove field.
(init_fork_list): Do not delete the checkpoint from the inferior
list (it is not there).
(fork_load_infrun_state): Don't switch inferior_ptid here. Pass
the new checkpoint's ptid to linux_nat_switch_fork.
(fork_save_infrun_state): Make static. Don't stop the pc field of
fork_info, it's gone.
(linux_fork_mourn_inferior): Don't delete the checkpoint from the
inferior list, it's not there.
(linux_fork_detach): Ditto.
(delete_fork_command): Replace mention of fork/checkpoint by
checkpoint only.
(detach_fork_command): Likewise. Don't delete the checkpoint from
the inferior list.
(info_forks_command): Adjust.
(restore_detach_fork): Delete.
(checkpointing_pid): New.
(linux_fork_checkpointing_p): New.
(save_detach_fork): Delete.
(checkpoint_command): Delete temp_detach_fork. Don't remove
breakpoints, that's a nop. Store the pid of the process we're
checkpointing, and use make_cleanup_restore_integer to restore it.
Don't reinsert breakpoints here.
(process_command, fork_command): Delete.
(restart_command): Update comments to only mention checkpoints,
not forks.
(_initialize_linux_fork): Delete "fork", "process", "info forks"
commands.
* linux-fork.h (fork_save_infrun_state, fork_list): Delete
declarations.
(linux_fork_checkpointing_p): Declare.
* cli/cli-cmds.c (killlist): New.
* cli/cli-cmds.h (killlist): Declare.
* gdbcmd.h (killlist): Declare.
* inferior.c: Include "gdbthread.h".
(detach_inferior_command, kill_inferior_command)
(inferior_command): New.
(info_inferiors_command): Allow specifying a specific inferior id.
(_initialize_inferiors): Register "inferior", "kill inferior" and
"detach inferior" commands.
* infcmd.c (_initialize_infcmd): Make "kill" a prefix command.
* gdbthread.h (any_thread_of_process): Declare.
* thread.c (any_thread_of_process): New.
* NEWS: Mention multi-inferior debugging. Mention 'info
inferiors', 'inferior', 'detach inferior' and 'kill inferior' as
new commands.
(Removed commands): New section, mentioning that 'info forks',
'fork', 'process', 'delete fork' and 'detach fork' are now gone.
gdb/testsuite/
2009-07-02 Pedro Alves <pedro@codesourcery.com>
* gdb.base/multi-forks.exp: Only run detach-on-fork tests on
linux. Adjust to use "inferior", "info inferiors", "detach
inferior" and "kill inferior" instead of "restart", "info fork",
"detach fork" and "delete fork".
* gdb.base/ending-run.exp: Spell out "info".
* gdb.base/help.exp: Adjust to use test_prefix_command_help for
the "kill" command.
gdb/doc/
2009-07-02 Pedro Alves <pedro@codesourcery.com>
* gdb.texinfo (Debugging multiple inferiors): Document the
"inferior", "detach inferior" and "kill inferior" commands.
(Debugging Programs with Multiple Processes): Adjust to mention
generic "inferior" commands. Delete mention of "detach fork" and
"delete fork". Cross reference to "Debugging multiple inferiors"
section.
* NEWS: Document inlined function support.
* Makefile.in (SFILES): Add inline-frame.c.
(COMMON_OBS): Add inline-frame.o.
* block.c (contained_in): Rewrite to use lexical nesting.
(block_linkage_function): Skip inlined function blocks.
(block_inlined_p): New.
* block.h (struct block): Update comment.
(block_inlined_p): New prototype.
* blockframe.c (get_frame_block): Handle inlined functions.
(get_frame_function): Do not use block_linkage_function.
(block_innermost_frame): Use get_frame_block and contained_in.
* breakpoint.c (watchpoint_check): Remove extra reinit_frame_cache.
Skip over inlined functions. Simplify epilogue check.
(bpstat_check_breakpoint_conditions): Use get_stack_frame_id.
Update comments.
(set_momentary_breakpoint): Only accept non-inlined frames.
(watch_command_1): Use frame_unwind_caller_pc and
frame_unwind_caller_id instead of get_prev_frame.
(until_break_command): Likewise. Use get_stack_frame_id.
* buildsym.c (end_symtab): Set SYMBOL_SYMTAB for block functions.
* dwarf2loc.c (dwarf_expr_frame_base): Use block_linkage_function.
* dwarf2read.c (process_die): Handle DW_TAG_inlined_subroutine.
(read_func_scope, new_symbol): Likewise. Handle arguments specially
for inlined functions without call site information.
(inherit_abstract_dies): Allow tag mismatch for inlined subroutines.
(die_specification): Treat DW_AT_abstract_origin as a specification.
(read_type_die): Handle DW_TAG_inlined_subroutine.
* frame-unwind.c (frame_unwind_init): Add inline_frame_unwind.
* frame.c (fprint_frame_id): Print inline depth.
(fprint_frame_type): Handle INLINE_FRAME and SENTINEL_FRAME.
(skip_inlined_frames, get_stack_frame_id): New.
(frame_unwind_caller_id): Use skip_inlined_frames.
(frame_id_inlined_p): New.
(frame_id_eq): Make the logic match the comments. Add inline_depth
check.
(frame_id_inner): Handle inlined functions.
(frame_unwind_pc): New function, copied from frame_unwind_caller_pc.
(frame_unwind_caller_pc): Use skip_inlined_frames and frame_unwind_pc.
(get_prev_frame_1): Check for inline frames. Split out frame
allocation to get_prev_frame_raw.
(get_prev_frame_raw): New function.
(get_prev_frame): Handle inline frames.
(get_frame_pc): Use frame_unwind_pc.
(get_frame_address_in_block): Skip inlined frames on both sides.
(pc_notcurrent): Delete.
(find_frame_sal): Rewrite to handle inline call sites. Use
get_frame_address_in_block.
(deprecated_update_frame_pc_hack): Make static.
* frame.h: Update comments.
(struct frame_id): Add inline_depth.
(enum frame_type): Add INLINE_FRAME.
(frame_id_inlined_p, get_stack_frame_id): New prototypes.
* gdbthread.h (struct thread_info): Add step_stack_frame_id field.
* infcmd.c (set_step_frame): New function.
(step_once): Use set_step_frame. Handle inlined functions.
(until_next_command): Use set_step_frame.
(finish_backward), finish_forward): Use get_stack_frame_id.
(finish_command): Support inlined functions.
* inferior.h (set_step_info): New prototype.
* infrun.c (RESUME_ALL): Use minus_one_ptid.
(clear_proceed_status): Clear step_stack_frame_id.
(init_wait_for_inferior): Call clear_inline_frame_state.
(init_execution_control_state): Make static.
(set_step_info): New function.
(init_thread_stepping_state): Do not set the symtab or line here.
(stepped_in_from): New function.
(handle_inferior_event): Handle inlined functions. Use set_step_info.
(insert_step_resume_breakpoint_at_frame): Use get_stack_frame_id.
(struct inferior_status): Add step_stack_frame_id.
(save_inferior_status, restore_inferior_status): Save and restore
step_stack_frame_id.
* inline-frame.c, inline-frame.h: New files.
* minsyms.c (prim_record_minimal_symbol_and_info): Use XCALLOC.
* regcache.c (regcache_write_pc): Call reinit_frame_cache.
* s390-tdep.c (s390_prologue_frame_unwind_cache): Handle INLINE_FRAME.
* stack.c (frame_show_address): New.
(print_frame_info, print_frame): Use it.
(find_frame_funname): Use get_frame_function. Handle inlined blocks.
(frame_info): Mark inlined functions.
(backtrace_command_1): Use get_current_user_frame.
(print_frame_local_vars, print_frame_label_vars): Update comments.
(return_command): Refuse inlined functions.
* symtab.c (lookup_symbol_aux_local): Stop at inlined function
boundaries.
(find_function_start_sal): Avoid inlined functions.
(completion_list_add_fields): New function.
(default_make_symbol_completion_list): Use it. Use block_static_block
and block_global_block. Check for inlined functions.
(skip_prologue_using_sal): Avoid line number comparison across
inlining.
* symtab.h (struct symbol): Add is_inlined.
(SYMBOL_INLINED): New.
* target.c (target_resume): Call clear_inline_frame_state.
* valops.c (value_of_variable): Check block_inlined_p.
gdb/doc/
* gdb.texinfo (Debugging Optimized Code): New chapter.
(Compiling for Debugging): Reference it. Move some
text to the new section.
gdb/testsuite/
* gdb.base/break.exp: Add an XFAIL for gcc/36748.
* gdb.cp/annota2.exp: Accept frames-invalid in more places.
* gdb.opt/Makefile.in (EXECUTABLES): Update.
* gdb.opt/clobbered-registers-O2.exp: Update to GPL v3.
* gdb.opt/inline-bt.c, gdb.opt/inline-bt.exp,
gdb.opt/inline-cmds.c, gdb.opt/inline-cmds.exp,
gdb.opt/inline-locals.c, gdb.opt/inline-locals.exp,
gdb.opt/inline-markers.c: New files.
* lib/gdb.exp (skip_inline_frame_tests): New function.
(skip_inline_var_tests): New function.
Global renaming of find_thread_pid to find_thread_ptid.
* gdbthread.h (find_thread_ptid): Renamed from find_thread_pid.
* thread.c (find_thread_ptid): Renamed from find_thread_pid.
All callers updated.
gdbserver:
Global renaming of find_thread_pid to find_thread_ptid.
* server.h (find_thread_ptid): Renamed from find_thread_pid.
* inferiors.c (find_thread_ptid): Renamed from find_thread_pid.
All callers updated.
* gdbthread.h (struct thread_info): New `pending_follow' field.
* thread.c (new_thread): New function.
(add_thread_silent): Use it.
* breakpoint.c (internal_breakpoint_number): New global, moved
from inside...
(create_internal_breakpoint): ... this.
(clone_momentary_breakpoint): New.
* breakpoint.h (clone_momentary_breakpoint): Declare.
* infrun.c (nullify_last_target_wait_ptid): Move declaration
higher.
(pending_follow): Delete.
(follow_fork): Handle pending follow fork event here. Moved the
preserving of thread stepping state here.
(resume): Don't handle pending follow fork events here. Only
install the inferior's terminal modes if we're about to resume it.
(proceed): Handle possible pending follow fork events here.
(init_wait_for_inferior): No need to clear pending_follow anymore,
it's gone.
(handle_inferior_event): Adjust to per-thread `pending_follow'.
Call `follow_fork' to handle following the fork. If the
follow-fork is cancelled, stop stepping.
* linux-nat.c (linux_child_follow_fork): Adjust to per-thread
`pending_follow' events. Remove code that handled preserving the
thread stepping state.
* inf-ptrace.c (inf_ptrace_follow_fork): Ditto.
* inf-ttrace.c (inf_ttrace_follow_fork): Ditto.
gdb/testsuite/
* gdb.threads/fork-thread-pending.c: New.
* gdb.threads/fork-thread-pending.exp: New.
if the thread's ptid without a thread id field is in the list
before calling thread_change_ptid.
(extended_remote_attach_1): In non-stop mode, do not rely on
querying the current thread, instead, query the thread list, and
select the first thread of the process.
* gdbthread.h (first_thread_of_process): Declare.
* thread.c (first_thread_of_process): Define.
* gdbthread.h (finish_thread_state, finish_thread_state_cleanup):
Declare.
* thread.c (finish_thread_state, finish_thread_state_cleanup): New.
* infrun.c (wait_for_inferior, fetch_inferior_event): If an error
is thrown while handling an event, finish the thread state.
(normal_stop): Use finish_thread_state cleanup.
* infcmd.c (run_command_1): If an error is thrown while starting
the inferior, finish the thread state.
2008-10-23 Pedro Alves <pedro@codesourcery.com>
* defs.h: Mention ptid_is_pid.
* inferior.h (ptid_is_pid): Declare.
* gdbthread.h (struct thread_info) <stop_requested>: New field.
(set_stop_requested): Declare.
* infcmd.c (interrupt_target_1): Call set_stop_requested.
* infrun.c (clear_proceed_status): Clear stop_requested.
(infrun_thread_stop_requested_callback,
infrun_thread_stop_requested): New.
(handle_inferior_event): If a TARGET_SIGNAL_TRAP is reported on a
thread that had an explicit stop request, pretend we got a
TARGET_SIGNAL_0. Always stop if the thread had an explicit stop
request.
(print_stop_reason): In the SIGNAL_RECEIVED case, if we're not
outputting to MI, and we got a TARGET_SIGNAL_0, print "# Stopped",
instead of mentioning signal 0.
(ptid_is_pid): New.
* thread.c (set_stop_requested): New.
* linux-nat.c (queued_waitpid): Rename to ...
(queued_waitpid_1): ... this. Add `peek' argument. Handle it.
(queued_waitpid): New, as wrapper to queued_waitpid_1.
(push_waitpid): Push the SIGTRAP to the local event queue, to the
kernel's.
(send_sigint_callback): Delete.
(linux_nat_stop_lwp): New.
(linux_nat_stop): Use it.
gdb/doc/
2008-10-23 Pedro Alves <pedro@codesourcery.com>
* observer.texi (thread_stop_requested): New.
gdb/testsuite/
2008-10-23 Pedro Alves <pedro@codesourcery.com>
* lib/mi-support.exp (mi_expect_interrupt): Expect signal 0
instead of SIGINT.
* infrun.c (context_switch): Don't save and load infrun state.
(context_switch_to): Delete.
* infcmd.c (proceed_thread_callback): Replace context_switch_to
calls by switch_to_thread calls.
* gdbthread.h (save_infrun_state, load_infrun_state): Delete.
* thread.c (main_thread_state, main_thread_executing): Delete.
(inferior_thread): Delete references to them.
(add_thread_silent): Fix case where we're adding a thread with the
same ptid as an exited thread. Remove references to
context-switching.
(load_infrun_state, save_infrun_state): Delete.
(thread_alive, is_thread_state, any_running, is_executing)
(set_executing): Remove the special handling for targets that
don't register any thread.
(restore_current_thread, thread_apply_all_command)
(do_captured_thread_select): Unconditionally call
switch_to_thread.
* mi/mi-main.c (mi_cmd_execute): Check for exited threads.
Call switch_to_thread instead of context_switch_to.
continuations.
* gdbthread.h (struct thread_info): Add comments around
continuations and intermediate_continuations.
(save_infrun_state, load_infrun_state): Delete continuations and
intermediate_continuations arguments.
* infrun.c (fetch_inferior_event): Only call normal_stop if
stop_soon is NO_STOP_QUIETLY.
(context_switch): Don't context-switch the continuations.
* thread.c (clear_thread_inferior_resources): Discard all
continuations of the thread we're clearing.
(save_infrun_state, load_infrun_state): Delete continuations and
intermediate_continuations arguments, and the code referencing
them.
* utils.c: Include "gdbthread.h".
(cmd_continuation, intermediate_continuation): Delete.
(add_continuation): Add thread_info* argument. Install the
continuation on it.
(restore_thread_cleanup): New.
(do_all_continuations_ptid, do_all_continuations_thread_callback):
New.
(do_all_continuations): Reimplement.
(discard_all_continuations_thread_callback,
discard_all_continuations_thread): New.
(discard_all_continuations): Reimplement.
(add_intermediate_continuation): Add thread_info* argument.
Install the continuation on it.
(do_all_intermediate_continuations_thread_callback)
(do_all_intermediate_continuations_thread): New.
(do_all_intermediate_continuations): Reimplement.
(discard_all_intermediate_continuations_thread_callback): New.
(discard_all_intermediate_continuations_thread): New.
(discard_all_intermediate_continuations): Reimplement.
* breakpoint.c (until_break_command): Install the continuation on
the current thread.
* defs.h (cmd_continuation, intermediate_continuation): Delete.
(struct thread_info): Forward declare.
(add_continuation, add_intermediate_continuation): Add
thread_info* argument.
(do_all_continuations_thread, discard_all_continuations_thread)
(do_all_intermediate_continuations_thread)
(discard_all_intermediate_continuations_thread): Declare.
* inf-loop.c (inferior_event_handler): In non-stop only run
continuations on the thread that stopped. In all-stop, run
continuations on all threads.
* infcmd.c (step_once, finish_command): Adjust.
* breakpoint.h (bpstat_do_actions): Remove bpstat* argument.
* breakpoint.c (bpstat_do_actions): Rename to ...
(bpstat_do_actions_1): ... this. Make static. Change return type
to int. Return true if a breakpoint proceeded.
(bpstat_do_actions): New, as wrapper around bpstat_do_actions_1.
(delete_breakpoint): Don't reference the global stop_bpstat; it's
gone.
* gdbthread.h (struct thread_info): Add stop_bpstat.
(save_infrun_state, load_infrun_state): Remove stop_bpstat
argument.
* thread.c (load_infrun_state, save_infrun_state): Remove
stop_bpstat argument, and the code referencing it.
* infcall.c: Include "gdbthread.h".
(call_function_by_hand): Adjust.
* exceptions.c: Include "gdbthread.h".
(throw_exception): Adjust.
* infcmd.c (stop_bpstat): Delete.
(continue_command): In all-stop, set the ignore count on the
thread that reported the stop. In non-stop, set it on the current
thread.
(finish_command_continuation): Adjust.
(program_info): Adjust.
* infrun.c (clear_proceed_status): Adjust.
(context_switch): Don't context-switch stop_bpstat.
(handle_inferior_event): Adjust.
(normal_stop): Adjust.
(save_inferior_status, restore_inferior_status): Adjust.
* inf-loop.c (inferior_event_handler): Remove parameter to
bpstat_do_actions call.
* top.c (command_loop): Remove parameter to bpstat_do_actions
call. Call it unconditionally.
* event-top.c (command_handler): Ditto.
* python/python.c (execute_gdb_command): Ditto.
* gdbthread.h (find_thread_id): Declare.
* thread.c (find_thread_id): Make non-static.
* mi/mi-main.c (mi_cmd_execute): Switch to the right
thread and frame, if necessary.
* mi/mi-parse.c (mi_parse): Handle --thread and --frame.
* mi/mi-parse.h (strcut mi_parse): New fields thread and frame.
* thread.c (enum thread_state): New.
(thread_state main_thread_running): Delete, in favor of...
(thread_state main_thread_state): ... this. Update throughout.
(clear_thread_inferior_resources): New, split from free_thread.
(free_thread): Call clear_thread_inferior_resources.
(init_thread_list): Set main thread to stopped state.
(add_thread_silent): Take care of PTID reuses.
(delete_thread): If deleting inferior_ptid or a thread with
refcount > 0, mark it as exited, but still keep it in the list.
Only notify of thread exits, if we haven't done so yet.
(iterate_over_threads): Make it safe to delete threads while
iterating over them.
(do_captured_list_thread_ids): Don't account for exited threads.
(thread_alive): Check for the THREAD_EXITED state, and don't set
ptid to -1 on exited threads.
(set_running): Update to account for extra possible states.
(is_thread_state): New.
(is_stopped, is_exited): New.
(is_running): Implement in terms of is_thread_state.
(any_running): Update.
(print_thread_info): Update. Account for exited threads. Don't
warn about missed frame restoring here, its done in the cleanup.
(switch_to_thread): Don't read from a thread that has gone.
(restore_current_thread): In non-stop mode, do a full context
switch.
(restore_selected_frame): Add a frame_level argument. Rewrite.
(struct current_thread_cleanup): Add selected_frame_level and
was_stopped members.
(do_restore_current_thread_cleanup): Check if thread was stopped
and still is, and if the target has registers, stack and memory
before restoring the selected frame. Don't delete the cleanup
argument here.
(restore_current_thread_cleanup_dtor): New.
(make_cleanup_restore_current_thread): Remove all arguments.
Rewrite.
(thread_apply_all_command): Update. Prune threads.
(thread_apply_command): Update.
(thread_command): Account for currently selected exited thread.
(do_captured_thread_select): Check for a running thread. Prune
threads.
(_initialize_thread): Make "info threads", "thread", "thread
apply", and "thread apply all" appliable without a selected thread.
* gdbthread.h (struct thread_info): Replace running_ by state_.
Add refcount.
(is_exited, is_stopped): Declare.
(make_cleanup_restore_current_thread): Remove all arguments.
* infrun.c: Include "event-top.h".
(fetch_inferior_event): In non-stop mode, restore selected thread
and frame after handling the event and running breakpoint
commands. Display GDB prompt if needed.
(normal_stop): In non-stop mode, don't print thread switching
notice.
* cli/cli-decode.c (set_cmd_no_selected_thread_ok)
(get_cmd_no_selected_thread_ok): New.
* cli/cli-decode.h (CMD_NO_SELECTED_THREAD_OK): New.
(set_cmd_no_selected_thread_ok, get_cmd_no_selected_thread_ok):
Declare.
* cli/cli-cmds.c: Set "pwd", "help", "info", "show" as
no-selected-thread ok.
* top.c (execute_command): Check for non no-selected-thread-ok
commands.
* linux-nat.c (struct saved_ptids, threads_to_delete)
(record_dead_thread, prune_lwps): Delete.
(exit_lwp): Unconditionally delete thread.
(linux_nat_resume): Remove prune_lwps call.
* infcmd.c (proceed_thread_callback): Check if !is_stopped instead
of is_running. Adjust to make_cleanup_restore_current_thread
interface change.
* mi/mi-main.c (mi_cmd_execute): Only allow a few commands if the
selected thread has exited.
* inf-loop.c (inferior_event_handler): Don't display the prompt
here.
* varobj.c (c_value_of_root): Update.
* defs.h (make_cleanup_dtor): Declare.
* utils.c (make_cleanup_dtor): New.
* Makefile.in (infrun.o): Depend on $(event_top_h).
* gdbthread.h: Remove unneeded forward declarations.
Include "inferior.h".
(struct thread_info): Add continuations,
intermediate_continuations, proceed_to_finish, step_over_calls,
stop_step, step_multi and stop_signal members.
(save_infrun_state): Add continuations,
intermediate_continuations, proceed_to_finish, step_over_calls,
stop_step, step_multi, stop_signal and stop_bpstat parameters.
(load_infrun_state): Add continuations,
intermediate_continuations, proceed_to_finish, step_over_calls,
stop_step, step_multi, stop_signal and stop_bpstat parameters.
* thread.c (load_infrun_state): In non-stop mode, load
continuations, intermediate_continuations, proceed_to_finish,
step_over_calls, stop_step, step_multi and stop_signal.
(save_infrun_state): Store continuations,
intermediate_continuations, proceed_to_finish, step_over_calls,
stop_step, step_multi, stop_signal and stop_bpstat.
(save_infrun_state): Store continuations,
intermediate_continuations, proceed_to_finish, step_over_calls,
stop_step, step_multi, stop_signal and stop_bpstat.
(free_thread): Clear The thread's stop_bpstat.
* inferior.h (context_switch_to): Declare.
* infrun.c (ecss): New global.
(context_switch): Context switch continuations,
intermediate_continuations, proceed_to_finish, step_over_calls,
stop_step, step_multi, stop_signal and stop_bpstat.
(wait_for_inferior): Use global ecss.
(async_ecss, async_ecs): Delete.
(fetch_inferior_event): Use global ecss.
(context_switch_to): New.
* top.c (execute_command): In non-stop, only check if the current
thread is running, in all-stop, check if there's any thread
running.
* breakpoint.c (bpstat_remove_breakpoint): New.
(bpstat_remove_breakpoint_callback): New.
(delete_breakpoint): Clear the stop_bpstats of all threads.
* mi/mi-main.c (mi_cmd_execute): In non-stop, only check if the
current thread is running, in all-stop, check if there's any
thread running.
* Makefile.in (gdbthread_h): Depend on $(inferior_h).
Joel Brobecker
Luis Machado
Pedro Alves
Markus Metzger
Joel Brobecker
Jan Kratochvil
Yao Qi
Marc Khouzam
Michael Snyder
Tom Tromey
Vladimir Prus
Daniel Jacobowitz
Doug Evans