bfd/
2014-01-09 Tristan Gingold <gingold@adacore.com>
* coff-rs6000.c (rs6000coff_vec, pmac_xcoff_vec): use jump
table macros and add macros to initializa the structure.
... not when a new GDB connection sends the status packet ('?').
Mainly just a cleanup/simplification, as GDB always sends '?' first.
Tested on x86_64 Fedora 17.
2014-01-08 Pedro Alves <palves@redhat.com>
* server.c (handle_status): Don't discard previous queued stop
replies or thread's pending status here.
(main) <disconnection>: Do it here instead.
Currently, when GDB connects in all-stop mode, GDBserver always
responds to the status packet with a GDB_SIGNAL_TRAP, even if the
program is actually stopped for some other signal.
(gdb) tar rem ...
...
(gdb) c
Program received signal SIGUSR1, User defined signal 1.
(gdb) disconnect
(gdb) tar rem ...
(gdb) c
(Or a GDB crash instead of an explicit disconnect.)
This results in the program losing that signal on that last continue,
because gdb will tell the target to resume with no signal (to suppress
the GDB_SIGNAL_TRAP, due to 'handle SISGTRAP nopass'), and that will
actually suppress the real signal the program had stopped for
(SIGUSR1). To fix that, I think we should make GDBserver report the
real signal the thread had stopped for in response to the status
packet:
@item ?
@cindex @samp{?} packet
Indicate the reason the target halted. The reply is the same as for
step and continue.
But, that raises the question -- which thread are we reporting the
status for? Due to how the RSP in all-stop works, we can only report
one status. The status packet's response is a stop reply packet, so
it includes the thread identifier, so it's not a problem packet-wise.
However, GDBserver is currently always reporting the status for first
thread in the thread list, even though that may well not be the thread
that got the signal that caused the program to stop. So the next
logical step would be to report the status for the
last_ptid/last_status thread (the last event reported to gdb), if it's
still around; and if not, fallback to some other thread.
There's an issue on the GDB side with that, though...
GDB currently always adds the thread reported in response to the
status query as the first thread in its list. That means that if we
start with e.g.,
(gdb) info threads
3 Thread 1003 ...
* 2 Thread 1002 ...
1 Thread 1001 ...
And reconnect:
(gdb) disconnect
(gdb) tar rem ...
We end up with:
(gdb) info threads
3 Thread 1003 ...
2 Thread 1001 ...
* 1 Thread 1002 ...
Not a real big issue, but it's reasonably fixable, by having GDB
fetch/sync the thread list before fetching the status/'?', and then
using the status to select the right thread as current on the GDB
side. Holes in the thread numbers are squashed before/after
reconnection (e.g., 2,3,5 becomes 1,2,3), but the order is preserved,
which I think is both good, and good enough.
However (yes, there's more...), the previous GDB that was connected
might have had gdbserver running in non-stop mode, or could have left
gdbserver doing disconnected tracing (which also forces non-stop), and
if the new gdb/connection is in all-stop mode, we can end up with more
than one thread with a signal to report back to gdb. As we can only
report one thread/status (in the all-stop RSP variant; the non-stop
variant doesn't have this issue), we get to do what we do at every
other place we have this situation -- leave events we can't report
right now as pending, so that the next resume picks them up.
Note all this ammounts to a QoI change, within the existing framework.
There's really no RSP change here.
The only user visible change (other than that the signal is program is
stopped at isn't lost / is passed to the program), is in "info
program", that now can show the signal the program stopped for. Of
course, the next resume will respect the pass/nopass setting for the
signal in question. It'd be reasonable to have the initial connection
tell the user the program was stopped with a signal, similar to when
we load a core to debug, but I'm leaving that out for a future change.
I think we'll need to either change how handle_inferior_event & co
handle stop_soon, or maybe bypass them completely (like
fork-child.c:startup_inferior) for that.
Tested on x86_64 Fedora 17.
gdb/gdbserver/
2014-01-08 Pedro Alves <palves@redhat.com>
* gdbthread.h (struct thread_info) <status_pending_p>: New field.
* server.c (visit_actioned_threads, handle_pending_status): New
function.
(handle_v_cont): Factor out parts to ...
(resume): ... this new function. If in all-stop, and a thread
being resumed has a pending status, report it without actually
resuming.
(myresume): Adjust to use the new 'resume' function.
(clear_pending_status_callback, set_pending_status_callback)
(find_status_pending_thread_callback): New functions.
(handle_status): Handle the case of multiple threads having
interesting statuses to report. Report threads' real last signal
instead of always reporting GDB_SIGNAL_TRAP. Look for a thread
with an interesting thread to report the status for, instead of
always reporting the status of the first thread.
gdb/
2014-01-08 Pedro Alves <palves@redhat.com>
* remote.c (remote_add_thread): Add threads silently if starting
up.
(remote_notice_new_inferior): If in all-stop, and starting up,
don't call notice_new_inferior.
(get_current_thread): New function, factored out from ...
(add_current_inferior_and_thread): ... this. Adjust.
(remote_start_remote) <all-stop>: Fetch the thread list. If we
found any thread, then select the remote's current thread as GDB's
current thread too.
gdb/testsuite/
2014-01-08 Pedro Alves <palves@redhat.com>
* gdb.threads/reconnect-signal.c: New file.
* gdb.threads/reconnect-signal.exp: New file.
This patch fixes 2 GNU_RELRO segment bugs:
1. lang_size_sections didn't properly align base to the maximum
alignment power of sections between DATA_SEGMENT_ALIGN and
DATA_SEGMENT_RELRO_END.
2. ld failed to adjust LOAD segment to generate GNU_RELRO segment
when LOAD segment doesn't fit GNU_RELRO segment. This is
https://sourceware.org/bugzilla/show_bug.cgi?id=14207
We "fixed" ld by not generating GNU_RELRO segment. This patch
adjusts LOAD segment to generate GNU_RELRO segment. It fixes
PR ld/16322 and at the same time it also fixes PR binutils/16323
since now we can adjust LOAD segment if it is too small.
bfd/
PR ld/14207
PR ld/16322
PR binutils/16323
* elf.c (_bfd_elf_map_sections_to_segments): Don't check section
size for PT_GNU_RELRO segment.
(assign_file_positions_for_load_sections): If PT_LOAD segment
doesn't fit PT_GNU_RELRO segment, adjust its p_filesz and p_memsz.
ld/
PR ld/14207
PR ld/16322
PR binutils/16323
* ldlang.c (lang_size_sections): Properly align RELRO base.
ld/testsuite/
PR ld/14207
PR ld/16322
PR binutils/16323
* ld-elf/pr16322.d: New file.
* ld-elf/pr16322.s: Likewise.
* ld-x86-64/pr14207.d: Expect PT_GNU_RELRO segment.
binutils/
* version.c (print_version): Update copyright year to 2014.
gas/
* as.c (parse_args): Update copyright year to 2014.
gold/
* version.cc (print_version): Update copyright year to 2014.
ld/
* ldver.c (ldversion): Update copyright year to 2014.
opcodes/
* i386-gen.c (process_copyright): Update copyright year to 2014.
Now that the GDB 7.7 branch has been created, we can
bump the version number.
gdb/ChangeLog:
GDB 7.7 branch created (79301218fa):
* version.in: Bump version to 7.7.50.DATE-cvs.
This patch fixes these errors below:
../../binutils-gdb/gdb/spu-linux-nat.c: In function ‘spu_symbol_file_add_from_memory’:
../../binutils-gdb/gdb/spu-linux-nat.c:368:3: error: pointer targets in passing argument 2 of ‘spu_proc_xfer_spu’ differ in signedness [-Werror=pointer-sign]
../../binutils-gdb/gdb/spu-linux-nat.c:232:1: note: expected ‘gdb_byte *’ but argument is of type ‘char *’
../../binutils-gdb/gdb/spu-linux-nat.c: In function ‘spu_xfer_partial’:
../../binutils-gdb/gdb/spu-linux-nat.c:598:7: error: pointer targets in passing argument 1 of ‘strtoulst’ differ in signedness [-Werror=pointer-sign]
In file included from ../../binutils-gdb/gdb/defs.h:769:0,
from ../../binutils-gdb/gdb/spu-linux-nat.c:21:
../../binutils-gdb/gdb/utils.h:43:15: note: expected ‘const char *’ but argument is of type ‘gdb_byte *’
gdb:
2014-01-08 Yao Qi <yao@codesourcery.com>
* spu-linux-nat.c (spu_symbol_file_add_from_memory): Change
type of 'id' to gdb_byte. Cast 'id' to 'const char *'.
(spu_xfer_partial): Cast 'buf' to 'const char *'.
This patch fixes the following build error:
../../binutils-gdb/gdb/spu-linux-nat.c:383:5: error: passing argument 2 of ‘symbol_file_add_from_bfd’ makes pointer from integer without a cast [-Werror]
In file included from ../../binutils-gdb/gdb/spu-linux-nat.c:29:0:
../../binutils-gdb/gdb/symfile.h:444:24: note: expected ‘const char *’ but argument is of type ‘int’
../../binutils-gdb/gdb/spu-linux-nat.c:383:5: error: passing argument 3 of ‘symbol_file_add_from_bfd’ makes integer from pointer without a cast [-Werror]
In file included from ../../binutils-gdb/gdb/spu-linux-nat.c:29:0:
../../binutils-gdb/gdb/symfile.h:444:24: note: expected ‘int’ but argument is of type ‘void *’
../../binutils-gdb/gdb/spu-linux-nat.c:383:5: error: passing argument 5 of ‘symbol_file_add_from_bfd’ makes integer from pointer without a cast [-Werror]
In file included from ../../binutils-gdb/gdb/spu-linux-nat.c:29:0:
../../binutils-gdb/gdb/symfile.h:444:24: note: expected ‘int’ but argument is of type ‘void *’
../../binutils-gdb/gdb/spu-linux-nat.c:383:5: error: too few arguments to function ‘symbol_file_add_from_bfd’
Argument 'name' was added to function symbol_file_add_from_bfd by this patch
[patchv4 4/5] Keep objfile original filename
https://sourceware.org/ml/gdb-patches/2013-09/msg00683.html
but caller of symbol_file_add_from_bfd in spu-linux-nat.c wasn't updated.
This patch fixes the build error.
gdb:
2014-01-08 Yao Qi <yao@codesourcery.com>
* spu-linux-nat.c (spu_symbol_file_add_from_memory): Pass
return value of bfd_get_filename to symbol_file_add_from_bfd.
* coff-pe-read.c (struct read_pe_section_data): Add index field.
(add_pe_exported_sym): Use SECTION_DATA->INDEX for call
to prim_record_mininal_symbol_and_info.
(add_pe_forwarded_sym): Use known section number of forwarded symbol
in call to prim_record_minimal_symbol_and_info.
(read_pe_exported_syms): Set index field of section_data.
gdb/ChangeLog:
2014-01-07 Edjunior Barbosa Machado <emachado@linux.vnet.ibm.com>
* source.c (add_path): Fix check for duplicated paths in the previously
included paths.
gdb/testsuite/ChangeLog:
2014-01-07 Jan Kratochvil <jan.kratochvil@redhat.com>
* gdb.base/source-dir.exp: New file.
This removes the last uses of PARAMS from sim.
2014-01-06 Tom Tromey <tromey@redhat.com>
* README-HACKING: Don't use PARAMS.
* arm/wrapper.c: Don't use PARAMS.
* bfin/sim-main.h: Don't use PARAMS.
* common/callback.c: Don't use PARAMS.
* common/cgen-trace.c: Don't use PARAMS.
* common/run-sim.h: Don't use PARAMS.
* common/run.c: Don't use PARAMS.
* common/sim-base.h: Don't use PARAMS.
* common/sim-load.c: Don't use PARAMS.
* common/sim-options.h: Don't use PARAMS.
* common/sim-trace.c: Don't use PARAMS.
* common/sim-trace.h: Don't use PARAMS.
* common/sim-utils.h: Don't use PARAMS.
* cr16/cr16_sim.h: Don't use PARAMS.
* cr16/gencode.c: Don't use PARAMS.
* cr16/interp.c: Don't use PARAMS.
* cr16/simops.c: Don't use PARAMS.
* d10v/d10v_sim.h: Don't use PARAMS.
* d10v/gencode.c: Don't use PARAMS.
* d10v/interp.c: Don't use PARAMS.
* d10v/simops.c: Don't use PARAMS.
* erc32/erc32.c: Don't use PARAMS.
* erc32/exec.c: Don't use PARAMS.
* erc32/float.c: Don't use PARAMS.
* erc32/func.c: Don't use PARAMS.
* erc32/sis.c: Don't use PARAMS.
* erc32/sis.h: Don't use PARAMS.
* mips/interp.c: Don't use PARAMS.
* mips/sim-main.h: Don't use PARAMS.
* sh/interp.c: Don't use PARAMS.
* v850/sim-main.h: Don't use PARAMS.
* v850/v850_sim.h: Don't use PARAMS.
This removes the remaining uses of PARAMS from include/cgen.
Tested by rebuilding; a file in opcodes includes this header.
2014-01-06 Tom Tromey <tromey@redhat.com>
* bitset.h: Remove uses of PARAMS.
This removes the last uses of the obsolete VA_* macros from binutils.
All the binutils and bfd changes were tested by rebuilding.
I didn't rebuild the gas change but I think it is obviously correct.
2014-01-07 Tom Tromey <tromey@redhat.com>
* elf32-xtensa.c (vsprint_msg): Don't use old VA_* compatibility
wrappers.
2014-01-07 Tom Tromey <tromey@redhat.com>
* bucomm.c (fatal, non_fatal): Replace obsolete VA_* macros with
stdarg macros.
* dlltool.c (inform): Replace obsolete VA_* macros with stdarg
macros.
* dllwrap.c (inform, warn): Replace obsolete VA_* macros with
stdarg macros.
2014-01-07 Tom Tromey <tromey@redhat.com>
* config/tc-tic30.c (debug): Avoid old VA_* compatibility
wrappers.
This removes the last uses of PARAMS from binutils.
The two changes in binutils were tested by rebuilding.
I didn't rebuild the gas change but I think it is obviously correct.
2014-01-07 Tom Tromey <tromey@redhat.com>
* coffgrok.h (coff_ofile): Don't use PARAMS.
* nlmheader.y (strerror): Don't use PARAMS.
2014-01-07 Tom Tromey <tromey@redhat.com>
* config/tc-microblaze.h (parse_cons_expression_microblaze): Don't
use PARAMS.
This removes the last use of ANSI_PROTOTYPES in the tree.
It appears in gas.
I didn't even rebuild this but I think it is obviously correct.
2014-01-07 Tom Tromey <tromey@redhat.com>
* config/tc-xc16x.h: Don't use ANSI_PROTOTYPES.
This patch fixes this build error below:
../../binutils-gdb/gdb/spu-linux-nat.c:616:1: error: no previous prototype for ‘_initialize_spu_nat’ [-Werror=missing-prototypes]
gdb:
2014-01-07 Yao Qi <yao@codesourcery.com>
* spu-linux-nat.c (_initialize_spu_nat): Declare.
When I verify my changes to target.h doesn't break build on aix, I get
the following build error on a clean GDB checkout.
../../binutils-gdb/gdb/aix-thread.c: In function 'pdc_read_regs':
../../binutils-gdb/gdb/aix-thread.c:366:4: error: passing argument 3 of 'ptrace32' makes integer from pointer without a cast [-Werror]
if (!ptrace32 (PTT_READ_GPRS, tid, gprs32, 0, NULL))
^
../../binutils-gdb/gdb/aix-thread.c:263:1: note: expected 'long long int' but argument is of type 'uint32_t *'
ptrace32 (int req, int id, addr_ptr addr, int data, int *buf)
^
../../binutils-gdb/gdb/aix-thread.c:375:42: error: cast from pointer to integer of different size [-Werror=pointer-to-int-cast]
if (!ptrace32 (PTT_READ_FPRS, tid, (addr_ptr) fprs, 0, NULL))
^
../../binutils-gdb/gdb/aix-thread.c:392:39: error: cast from pointer to integer of different size [-Werror=pointer-to-int-cast]
if (!ptrace32 (PTT_READ_SPRS, tid, (addr_ptr) &sprs32, 0, NULL))
GCC uses -maix32 in default, so the 'long long' is 64 bit and address
is 32 bit. Such warnings should go away if -maix64 is used.
In this patch, I cast the parameter to uintptr_t first, and then cast
to addr_ptr.
gdb:
2014-01-07 Yao Qi <yao@codesourcery.com>
Joel Brobecker <brobecker@adacore.com>
* aix-thread.c (pdc_read_regs): Cast parameter to uintptr_t.
(pdc_write_regs): Likewise.
(fetch_regs_kernel_thread): Likewise.
(store_regs_kernel_thread): Likewise.
Consider the following code:
type Element is abstract tagged null record;
type GADataType is interface;
type Data_Type is new Element and GADataType with record
I : Integer := 42;
end record;
Result1 : Data_Type;
GGG1 : GADataType'Class := GADataType'Class (Result1);
When trying to create a varobj for variable ggg1, GDB currently
returns an object which has no child:
-var-create ggg1 * ggg1
^done,name="ggg1",numchild="0",[...]
This is incorrect, it should return an object which has one child
(field "i"). This is because tagged-type objects are dynamic, and
we need to apply a small transformation in order to get their actual
type. This is already done on the GDB/CLI side in ada-valprint,
and it needs to be done on the ada-varobj side as well.
gdb/ChangeLog:
* ada-varobj.c (ada_varobj_adjust_for_child_access): Convert
tagged type objects to their actual type.
gdb/testsuite/ChangeLog:
* gdb.ada/mi_interface: New testcase.
Consider the following types:
type Time_T is record
Secs : Integer;
end record;
Before : Time_T := (Secs => 1384395743);
In this example, we assume that type Time_T is the number of seconds
since Epoch, and so added a Python pretty-printer, to print this
type in a more human-friendly way. For instance:
(gdb) print before
$1 = Thu Nov 14 02:22:23 2013 (1384395743)
However, we've noticed that things stop working when this type is
embedded inside another record, and we try to print that record.
For instance, with the following declarations:
type Composite is record
Id : Integer;
T : Time_T;
end record;
Afternoon : Composite := (Id => 1, T => (Secs => 1384395865));
(gdb) print afternoon
$2 = (id => 1, t => (secs => 1384395865))
We expected instead:
(gdb) print afternoon
$2 = (id => 1, t => Thu Nov 14 02:24:25 2013 (1384395865))
This patch fixes the problem by making sure that we try to print
each field via a call to val_print, rather than calling ada_val_print
directly. We need to go through val_print, as the val_print
handles all language-independent features such as calling the
pretty-printer, knowing that ada_val_print will get called eventually
if actual Ada-specific printing is required (which should be the
most common scenario).
And because val_print takes the language as parameter, we enhanced
the print_field_values and print_variant_part to also take a language.
As a bonus, this allows us to remove a couple of references to
current_language.
gdb/ChangeLog:
* ada-valprint.c (print_field_values): Add "language" parameter.
Update calls to print_field_values and print_variant_part.
Pass new parameter "language" in call to val_print instead
of "current_language". Replace call to ada_val_print by call
to val_print.
(print_variant_part): Add "language" parameter.
(ada_val_print_struct_union): Update call to print_field_values.
gdb/testsuite/ChangeLog:
* gdb.ada/pp-rec-component.exp, gdb.ada/pp-rec-component.py,
gdb.ada/pp-rec-component/foo.adb, gdb.ada/pp-rec-component/pck.adb,
gdb.ada/pp-rec-component/pck.ads: New files.
ada_print_floating declares a char buffer with a size that we're hoping
to always be large enough to hold any string representation of a float
value. But that's not really necessary, and also forces us to create
a small wrapper (ui_memcpy) to perform the extraction from a temporary
stream into this buffer. This patches fixes both issues by relying on
ui_file_xstrdup. This forces us to make a few adjustments that are
minor in nature, as we now need to defer the cleanup to the end of
the function.
gdb/ChangeLog:
* ada-valprint.c (ui_memcpy): Delete.
(ada_print_floating): Update documentation. Add empty line
between between function documentation and implementation.
Delete variable "buffer". Use ui_file_xstrdup in place of
ui_file_put. Minor adjustments following this change.
This patch creates a new function called "ada_val_print_string"
whose code is directly extracted out of ada_val_print_array.
The extracted code is then replaced by a call to this new function,
followed by a "return". The return avoids the need for an "else"
branch, with the associated block nesting. The latter is not really
terrible in this case, but it seems more readable this way.
gdb/ChangeLog:
* ada-valprint.c (ada_val_print_string): New function,
extracted from ada_val_print_array.
(ada_val_print_array): Replace extracted code by call
to ada_val_print_string followed by a return. Move
"else" branch to the function's top block.
This patch moves ada_val_print_array to group it with the other
ada_val_print_* function which are being called by ada_val_print_1.
Since this function is in the same situation, it is more logical
to move it within that group.
It also rationalizes the function's prototype to match the prototype
of the other ada_val_print_* routines.
gdb/ChangeLog:
* ada-valprint.c (ada_val_print_array): Move implementation
down. Rename parameter "offset" and "val" into "offset_aligned"
and "original_value" respectively. Add parameter "offset".
The logic as currently implemented in this function was a little
difficult to follow, due to the nested of if/else conditions,
but most of the time, the "else" block was very simple. So this
patch re-organizes the code to use fewer levels of nesting by
using return statements, and writing the code as a sequence of
"if something simple, then handle it and return" blocks.
While touching this code, this patch changes the cryptic "???"
printed when trying to print a reference pointing to an undefined
type. This should only ever happen if the debugging information
was corrupted or improperly read. But in case that happens, we now
print "<ref to undefined type>" instead. This is more in line
with how we print other conditions such as optimized out pieces,
or synthetic pointers.
gdb/ChangeLog:
* ada-valprint.c (ada_val_print_ref): Rewrite by mostly
re-organizing the code. Change the "???" message printed
when target type is a TYPE_CODE_UNDEF into
"<ref to undefined type>".
The function print_record is a fairly small and straightforward
function which is only called from one location. So this patch
inlines the code at the point of call.
One small advantage is that the context of use of this patch has
now become such that we can assume that TYPE is not a typedef,
nor an enum. So thhe call to ada_check_typedef is unnecessary,
and this patch removes it.
gdb/ChangeLog:
* ada-valprint.c (print_record): Delete, implementation inlined...
(ada_val_print_struct_union): ... here. Remove call to
ada_check_typedef in inlined implementation.
The idea of this patch is that it's hard to have a global view of
ada_val_print_1 because its body spans over too many lines. Also,
each individual "case" block within the giant "switch" can be hard
to isolate if spanning over multiple pages as well.
gdb/ChangeLog:
* ada-valprint.c (ada_val_print_gnat_array): New function,
extracted from ada_val_print_1;
(ada_val_print_ptr, ada_val_print_num, ada_val_print_enum)
(ada_val_print_flt, ada_val_print_struct_union)
(ada_val_print_ref): Likewise.
(ada_val_print_1): Delete variables i and elttype.
Replace extracted-out code by call to corresponding
new functions.
I am not sure why this function was called in the first place, but
it disrupts the printing flow when in GDB/MI mode, ending the current
console stream output, and starting a new one. It's not clear whether,
with the code as currently written, the problem is actually visible
or only latent. But, it becomes visible when we replace one of the
"return" statements in the "switch" block just above by a "break"
statement (this is something I'd like to do, and what made me realize
the problem). With the gdb_flush call (after having replaced the
"return" statement as explained above), we get:
% gdb -q -i=mi ada_prg
(gdb)
print 1
&"print 1\n"
!! -> ~"$1 = 1"
!! -> ~"\n"
^done
With the gdb_flush call removed, we now get the entire output into
a single stream.
(gdb)
print 1
&"print 1\n"
~"$1 = 1"
~"\n"
^done
gdb/ChangeLog:
* ada-valprint.c (ada_val_print_1): Remove call to gdb_flush.
This is to standardize a little bit how printing is done, and in
particular make sure that everyone goes through val_print when
printing sub-objects. This helps making sure that standard features
handled by val_print get activated when expected.
gdb/ChangeLog:
* ada-valprint.c (ada_val_print_1): Replace calls to
ada_val_print_1 by calls to val_print.
This is to help calling val_print. We would like to be more systematic
in calling val_print when printing, because it allows us to make sure
we take advantage of the standard features such as pretty-printing
which are handled by val_print.
gdb/ChangeLog:
* ada-valprint.c (ada_val_print_1): Add parameter "language".
Update calls to self accordingly. Replace calls to c_val_print
by calls to val_print.
Advance function declarations add to the maintenance cost, since
any update to the function prototype needs to be made twice.
For static functions, this is not necessary, and this patch
reorders the function so as to reduce the use of such advanche
declarations.
gdb/ChangeLog:
* ada-valprint.c (print_record): Delete declaration.
(adjust_type_signedness, ada_val_print_1): Likewise.
(ada_val_print): Move function implementation down.
(print_variant_part, print_field_values, print_record):
Move function implementation up.
Consider the following declarations:
typedef long our_time_t;
our_time_t current_time = 1384395743;
The purpose of this patch is to allow the use of a pretty-printer
for variables of type our_time_t. Normally, pretty-printing sniffers
use the tag name in order to determine which, if any, pretty-printer
should be used. But in the case above, the tag name is not set, since
it does not apply to integral types.
This patch extends the gdb.Type list of attributes to also include
the name of the type, thus allowing the sniffer to match against
that name. With that change, I was able to write a pretty-printer
which displays our variable as follow:
(gdb) print current_time
$1 = Thu Nov 14 02:22:23 2013 (1384395743)
gdb/ChangeLog:
* python/py-type.c (typy_get_name): New function.
(type_object_getset): Add entry for attribute "name".
* NEWS: Add entry mentioning this new attribute.
gdb/doc/ChangeLog:
* gdb.texinfo (Types In Python): Document new attribute Types.name.
gdb/testsuite:
* gdb.python/py-pp-integral.c: New file.
* gdb.python/py-pp-integral.py: New file.
* gdb.python/py-pp-integral.exp: New file.
Tested on x86_64-linux.
This patch removes the if statement and the comments together.
gdb:
2014-01-07 Yao Qi <yao@codesourcery.com>
* gnu-nat.c (set_exceptions_cmd): Remove an empty body 'if'
statement.
This patch fixes the following error.
../../../git/gdb/gnu-nat.c: In function 'info_port_rights':
../../../git/gdb/gnu-nat.c:3083:11: error: passing argument 1 of 'parse_to_comma_and_eval' from incompatible pointer type [-Werror]
In file included from ../../../git/gdb/breakpoint.h:23:0,
from ../../../git/gdb/inferior.h:37,
from ../../../git/gdb/gnu-nat.c:55:
../../../git/gdb/value.h:763:22: note: expected 'const char **' but argument is of type 'char **'
gdb:
2014-01-07 Yao Qi <yao@codesourcery.com>
* gnu-nat.c (info_port_rights): Add qualifier const to
argument args.
This patch fixes the following error:
../../../git/gdb/gnu-nat.c: In function 'trace_me':
../../../git/gdb/gnu-nat.c:2106:8: error: old-style function definition [-Werror=old-style-definition]
gdb:
2014-01-07 Yao Qi <yao@codesourcery.com>
* gnu-nat.c (trace_me): Use 'void' for empty argument list.
inf_tid_to_proc is not defined at all. This patch is to remove its
declaration.
gdb:
2014-01-07 Yao Qi <yao@codesourcery.com>
* gnu-nat.c (inf_tid_to_proc): Remove declaration.
This patch fixes this error below by declaring _initialize_gnu_nat.
../../../git/gdb/gnu-nat.c:3447:1: error: no previous prototype for '_initialize_gnu_nat' [-Werror=missing-prototypes]
gdb:
2014-01-07 Yao Qi <yao@codesourcery.com>
* gnu-nat.c (_initialize_gnu_nat): Declare.
