PR gdb/15165
* breakpoint.c (dprintf_print_recreate): New.
(save_breakpoints): Let it not save dprintf commands.
(initialize_breakpoint_ops): Set dprintf_print_recreate.
2013-04-23 Hui Zhu <hui@codesourcery.com>
PR gdb/15165
* gdb.base/save-bp.exp: Add test for dprintf.
If !PARSE_CONDITION_AND_THREAD, then ARG is just the location, nothing
else. The fact that the describing comment of create_breakpoint
doesn't mention this just looks like an oversight of when extra_string
was added. "parse_condition_and_thread" has been a misnomer ever
since extra_string was added -- better rename it avoid more confusion.
This makes it "parse_arg", as that'll remain stable even if/when more
explicit parameters are added.
gdb/
2013-04-08 Pedro Alves <palves@redhat.com>
Keith Seitz <keiths@redhat.com>
* breakpoint.c (create_breakpoint): Rename
"parse_condition_and_thread" parameter to "parse_arg". Update
describing comment. If !PARSE_ARG, then error out if ARG is not
the empty string after extracting the location.
* breakpoint.h (create_breakpoint): Rename
"parse_condition_and_thread" parameter to "parse_arg".
gdb/testsuite/
2013-04-08 Pedro Alves <palves@redhat.com>
* gdb.mi/mi-break.exp (test_error): Add tests with garbage after
the location.
If a tracepoint's actions list includes a while-stepping action, and
then the actions are changed to a list without any while-stepping
action, the tracepoint's step_count will be left with a stale value.
For example:
(gdb) trace subr
Tracepoint 1 at 0x4004d9: file ../../../src/gdb/testsuite//actions-changed.c, line 31.
(gdb) actions
Enter actions for tracepoint 1, one per line.
End with a line saying just "end".
>collect $reg
>end
(gdb) set debug remote 1
(gdb) tstart
Sending packet: $QTinit#59...Packet received: OK
Sending packet: $QTDP:1:00000000004004d9:E:0:0-#a3...Packet received: OK
Sending packet: $QTDP👎00000000004004d9:R03FFFFFFFFFFFFFFFFFF#2b...Packet received: OK
(gdb) tstop
Sending packet: $QTStop#4b...Packet received: OK
Sending packet: $QTNotes:#e8...Packet received: OK
(gdb) actions
Enter actions for tracepoint 1, one per line.
End with a line saying just "end".
>collect $reg
>while-stepping 1
>collect $reg
>end
>end
(gdb) tstart
Sending packet: $QTinit#59...Packet received: OK
Sending packet: $QTDP:1:00000000004004d9:E:1:0-#a4...Packet received: OK
Sending packet: $QTDP👎00000000004004d9:R03FFFFFFFFFFFFFFFFFF-#58...Packet received: OK
Sending packet: $QTDP👎00000000004004d9:SR03FFFFFFFFFFFFFFFFFF#7e...Packet received: OK
(gdb) tstop
Sending packet: $QTStop#4b...Packet received: OK
Sending packet: $QTNotes:#e8...Packet received: OK
(gdb) actions
Enter actions for tracepoint 1, one per line.
End with a line saying just "end".
>collect $regs
>end
(gdb) tstart
Sending packet: $QTinit#59...Packet received: OK
Sending packet: $QTDP:1:00000000004004d9:E:1:0-#a4...Packet received: OK
Sending packet: $QTDP👎00000000004004d9:R03FFFFFFFFFFFFFFFFFF#2b...Packet received: OK
The last "$QTDP:1:00000000004004d9:E:1:0-#a4" should be "$QTDP:1:00000000004004d9:E:0:0-#a3".
In pseudo-diff:
-$QTDP:1:00000000004004d9:E:1:0-#a4
+$QTDP:1:00000000004004d9:E:0:0-#a3
A related issue is that the "commands" command actually supports
setting commands to a range of breakpoints/tracepoints at once. But,
hacking "maint info breakpoints" to print t->step_count, reveals:
(gdb) trace main
Tracepoint 5 at 0x45a2ab: file ../../src/gdb/gdb.c, line 29.
(gdb) trace main
Note: breakpoint 5 also set at pc 0x45a2ab.
Tracepoint 6 at 0x45a2ab: file ../../src/gdb/gdb.c, line 29.
(gdb) commands 5-6
Type commands for breakpoint(s) 5-6, one per line.
End with a line saying just "end".
> while-stepping 5
>end
> end
(gdb) maint info breakpoints 5
Num Type Disp Enb Address What
5 tracepoint keep y 0x000000000045a2ab in main at ../../src/gdb/gdb.c:29 inf 1
step_count=5
^^^^^^^^^^^^
while-stepping 5
end
not installed on target
(gdb) maint info breakpoints 6
Num Type Disp Enb Address What
6 tracepoint keep y 0x000000000045a2ab in main at ../../src/gdb/gdb.c:29 inf 1
step_count=0
^^^^^^^^^^^^
while-stepping 5
end
not installed on target
(gdb)
that tracepoint 6 doesn't end up with the correct step_count.
The issue is that here:
static void
do_map_commands_command (struct breakpoint *b, void *data)
{
struct commands_info *info = data;
if (info->cmd == NULL)
{
struct command_line *l;
if (info->control != NULL)
l = copy_command_lines (info->control->body_list[0]);
else
{
struct cleanup *old_chain;
char *str;
str = xstrprintf (_("Type commands for breakpoint(s) "
"%s, one per line."),
info->arg);
old_chain = make_cleanup (xfree, str);
l = read_command_lines (str,
info->from_tty, 1,
(is_tracepoint (b)
? check_tracepoint_command : 0),
b);
do_cleanups (old_chain);
}
info->cmd = alloc_counted_command_line (l);
}
validate_actionline is never called for tracepoints other than the
first (the copy_command_lines path). Right below, we have:
/* If a breakpoint was on the list more than once, we don't need to
do anything. */
if (b->commands != info->cmd)
{
validate_commands_for_breakpoint (b, info->cmd->commands);
incref_counted_command_line (info->cmd);
decref_counted_command_line (&b->commands);
b->commands = info->cmd;
observer_notify_breakpoint_modified (b);
}
And validate_commands_for_breakpoint looks like the right place to put
a call; if we reset step_count there too, we have a nice central fix
for the first issue as well, because trace_actions_command calls
breakpoint_set_commands that also calls
validate_commands_for_breakpoint.
We end up calling validate_actionline twice for the first tracepoint,
since read_command_lines calls it too, through
check_tracepoint_command, but that should be harmless.
2013-04-04 Pedro Alves <palves@redhat.com>
Hui Zhu <hui@codesourcery.com>
* breakpoint.c (validate_commands_for_breakpoint): If validating a
tracepoint, reset its STEP_COUNT and call validate_actionline.
2013-04-04 Stan Shebs <stan@codesourcery.com>
Pedro Alves <palves@redhat.com>
* gdb.trace/Makefile.in (PROGS): Add actions-changed.
* gdb.trace/actions-changed.c: New file.
* gdb.trace/actions-changed.exp: New file.
* lib/trace-support.exp (gdb_trace_setactions): Rename to ...
(gdb_trace_setactions_command): ... this. Add "actions_command"
parameter, and handle it.
(gdb_trace_setactions, gdb_trace_setcommands): New procedures.
This is sort of a continuation of Keith's parse_exp_1 constification
patch. It started out by undoing these bits:
@@ -754,9 +754,12 @@ validate_actionline (char **line, struct
tmp_p = p;
for (loc = t->base.loc; loc; loc = loc->next)
{
- p = tmp_p;
- exp = parse_exp_1 (&p, loc->address,
+ const char *q;
+
+ q = tmp_p;
+ exp = parse_exp_1 (&q, loc->address,
block_for_pc (loc->address), 1);
+ p = (char *) q;
and progressively making more things const upwards, fixing fallout,
rinse repeat, until GDB built again (--enable-targets=all).
That ended up constifying lookup_cmd/add_cmd and (lots of) friends,
and the completers.
I didn't try to constify the command hooks themselves, because I know
upfront there are commands that write to the command string argument,
and I think I managed to stop at a nice non-hacky split point already.
I think the only non-really-super-obvious changes are
tracepoint.c:validate_actionline, and tracepoint.c:trace_dump_actions.
The rest is just mostly about 'char *' => 'const char *', 'char **'=>
'const char **', and the occasional (e.g., deprecated_cmd_warning)
case of 'char **'=> 'const char *', where/when I noticed that nothing
actually cares about the pointer to pointer output.
Tested on x86_64 Fedora 17, native and gdbserver.
gdb/
2013-03-13 Pedro Alves <palves@redhat.com>
* ada-lang.c (struct add_partial_datum) <text, text0, word>: Make
fields const.
(ada_make_symbol_completion_list): Make "text0" parameter const.
* ax-gdb.c (agent_eval_command_one): Make "exp" parameter const.
* breakpoint.c (condition_completer): Make "text" and "word"
parameters const. Adjust.
(check_tracepoint_command): Adjust to validate_actionline
prototype change.
(catch_syscall_completer): Make "text" and "word" parameters
const.
* cli/cli-cmds.c (show_user): Make "comname" local const.
(valid_command_p): Make "command" parameter const.
(alias_command): Make "alias_prefix" and "command_prefix" locals
const.
* cli/cli-decode.c (add_cmd): Make "name" parameter const.
(add_alias_cmd): Make "name" and "oldname" parameters const.
Adjust. No longer make copy of OLDNAME.
(add_prefix_cmd, add_abbrev_prefix_cmd, add_set_or_show_cmd)
(add_setshow_cmd_full, add_setshow_enum_cmd)
(add_setshow_auto_boolean_cmd, add_setshow_boolean_cmd)
(add_setshow_filename_cmd, add_setshow_string_cmd)
(add_setshow_string_noescape_cmd)
(add_setshow_optional_filename_cmd, add_setshow_integer_cmd)
(add_setshow_uinteger_cmd, add_setshow_zinteger_cmd)
(add_setshow_zuinteger_unlimited_cmd, add_setshow_zuinteger_cmd)
(delete_cmd, add_info, add_info_alias, add_com, add_com_alias):
Make "name" parameter const.
(help_cmd): Rename "command" parameter to "arg". New const local
"command".
(find_cmd): Make "command" parameter const.
(lookup_cmd_1): Make "text" parameter pointer to const. Adjust to
deprecated_cmd_warning prototype change.
(undef_cmd_error): Make "cmdtype" parameter const.
(lookup_cmd): Make "line" parameter const.
(deprecated_cmd_warning): Change type of "text" parameter to
pointer to const char, from pointer to pointer to char. Adjust.
(lookup_cmd_composition): Make "text" parameter const.
(complete_on_cmdlist, complete_on_enum): Make "text" and "word"
parameters const.
* cli/cli-decode.h (struct cmd_list_element) <name>: Make field
const.
* cli/cli-script.c (validate_comname): Make "tem" local const.
(define_command): New const local "tem_c". Use it in calls to
lookup_cmd.
(document_command): Make "tem" and "comfull" locals const.
(show_user_1): Make "prefix" and "name" parameters const.
* cli-script.h (show_user_1): Make "prefix" and "name" parameters
const.
* command.h (add_cmd, add_alias_cmd, add_prefix_cmd)
(add_abbrev_prefix_cmd, completer_ftype, lookup_cmd, lookup_cmd_1)
(deprecated_cmd_warning, lookup_cmd_composition, add_com)
(add_com_alias, add_info, add_info_alias, complete_on_cmdlist)
(complete_on_enum, add_setshow_enum_cmd)
(add_setshow_auto_boolean_cmd, add_setshow_boolean_cmd)
(add_setshow_filename_cmd, add_setshow_string_cmd)
(add_setshow_string_noescape_cmd)
(add_setshow_optional_filename_cmd, add_setshow_integer_cmd)
(add_setshow_uinteger_cmd, add_setshow_zinteger_cmd)
(add_setshow_zuinteger_cmd, add_setshow_zuinteger_unlimited_cmd):
Change prototypes, constifying strings.
* completer.c (noop_completer, filename_completer): Make "text"
and "prefix" parameters const.
(location_completer, expression_completer)
(complete_line_internal): Make "text" and "prefix" parameters
const and adjust.
(command_completer, signal_completer): Make "text" and "prefix"
parameters const.
* completer.h (noop_completer, filename_completer)
(expression_completer, location_completer, command_completer)
(signal_completer): Change prototypes.
* corefile.c (complete_set_gnutarget): Make "text" and "word"
parameters const.
* cp-abi.c (cp_abi_completer): Likewise.
* expression.h (parse_expression_for_completion): Change
prototype.
* f-lang.c (f_make_symbol_completion_list): Make "text" and "word"
parameters const.
* infcmd.c (_initialize_infcmd): Make "cmd_name" local const.
* infrun.c (handle_completer): Make "text" and "word" parameters
const.
* interps.c (interpreter_completer): Make "text" and "word"
parameters const.
* language.h (struct language_defn)
<la_make_symbol_completion_list>: Make "text" and "word"
parameters const.
* parse.c (parse_exp_1): Move const hack to parse_exp_in_context.
(parse_exp_in_context): Rename to ...
(parse_exp_in_context_1): ... this.
(parse_exp_in_context): Reimplement, with const hack from
parse_exp_1.
(parse_expression_for_completion): Make "string" parameter const.
* printcmd.c (decode_format): Make "string_ptr" parameter pointer
to pointer to const char. Adjust.
(print_command_1): Make "exp" parameter const.
(output_command): Rename to ...
(output_command_const): ... this. Make "exp" parameter const.
(output_command): Reimplement.
(x_command): Adjust.
(display_command): Rename "exp" parameter to "arg". New "exp"
local, const version of "arg".
* python/py-auto-load.c (gdbpy_initialize_auto_load): Make
"cmd_name" local const.
* python/py-cmd.c (cmdpy_destroyer): Cast const away in xfree
call.
(cmdpy_completer): Make "text" and "word" parameters const.
(gdbpy_parse_command_name): Make "prefix_text2" local const.
* python/py-param.c (add_setshow_generic): Make "tmp_name" local
const.
* remote.c (_initialize_remote): Make "cmd_name" local const.
* symtab.c (language_search_unquoted_string): Make "text" and "p"
parameters const. Adjust.
(completion_list_add_fields): Make "sym_text", "text" and "word"
parameters const.
(struct add_name_data) <sym_text, text, word>: Make fields const.
(default_make_symbol_completion_list_break_on): Make "text" and
"word" parameters const. Adjust locals.
(default_make_symbol_completion_list)
(make_symbol_completion_list, make_symbol_completion_type)
(make_symbol_completion_list_fn): Make "text" and "word"
parameters const.
(make_file_symbol_completion_list): Make "text", "word" and
"srcfile" parameters const. Adjust locals.
(add_filename_to_list): Make "text" and "word" parameters const.
(struct add_partial_filename_data) <text, word>: Make fields
const.
(make_source_files_completion_list): Make "text" and "word"
parameters const.
* symtab.h (default_make_symbol_completion_list_break_on)
(default_make_symbol_completion_list, make_symbol_completion_list)
(make_symbol_completion_type enum type_code)
(make_symbol_completion_list_fn make_file_symbol_completion_list)
(make_source_files_completion_list): Change prototype.
* top.c (execute_command): Adjust to pass pointer to pointer to
const char to lookup_cmd, and to deprecated_cmd_warning prototype
change.
(set_verbose): Make "cmdname" local const.
* tracepoint.c (decode_agent_options): Make "exp" parameter const,
and adjust.
(validate_actionline): Make "line" parameter a pointer to const
char, and adjust.
(encode_actions_1): Make "action_exp" local const, and adjust.
(encode_actions): Adjust.
(replace_comma): Delete.
(trace_dump_actions): Make "action_exp" and "next_comma" locals
const, and adjust. Don't frob the action string while splitting
it at commas. Instead, make a copy of each split substring in
turn.
(trace_dump_command): Adjust to validate_actionline prototype
change.
* tracepoint.h (decode_agent_options, decode_agent_options)
(encode_actions, validate_actionline): Change prototypes.
* valprint.h (output_command): Delete declaration.
(output_command_const): Declare.
* value.c (function_destroyer): Cast const away in xfree call.
pointer to expression string to parse_exp_1.
(create_excep_cond_exprs): Likewise.
* ax-gdb.c (agent_eval_command_one): Likewise.
(maint_agent_printf_command): Likewise.
Constify much of the string handling/parsing.
* breakpoint.c (set_breakpoint_condition): Pass const
pointer to expression string to parse_exp_1.
(update_watchpoint): Likewise.
(parse_cmd_to_aexpr): Constify string handling.
Pass const pointer to parse_exp_1.
(init_breakpoint_sal): Pass const pointer to parse_exp_1.
(find_condition_and_thread): Likewise.
Make TOK const.
(watch_command_1): Make "arg" const.
Constify string handling.
Copy the expression string instead of changing the input
string.
(update_breakpoint_location): Pass const pointer to
parse_exp_1.
* eval.c (parse_and_eval_address): Make "exp" const.
(parse_to_comma_and_eval): Make "expp" const.
(parse_and_eval): Make "exp" const.
* expression.h (parse_expression): Make argument const.
(parse_exp_1): Make first argument const.
* findcmd.c (parse_find_args): Treat "args" as const.
* linespec.c (parse_linespec): Pass const pointer to
linespec_expression_to_pc.
(linespec_expression_to_pc): Make "exp_ptr" const.
* parse.c (parse_exp_1): Make "stringptr" const.
Make a copy of the expression to pass to parse_exp_in_context until
this whole interface can be constified.
(parse_expression): Make "string" const.
* printcmd.c (ui_printf): Treat "arg" as const.
Handle const strings.
* tracepoint.c (validate_actionline): Pass const pointer to
all calls to parse_exp_1.
(encode_actions_1): Likewise.
* value.h (parse_to_comma_and_eval): Make argument const.
(parse_and_eval_address): Likewise.
(parse_and_eval): Likewise.
* varobj.c (varobj_create): Pass const pointer to parse_exp_1.
(varobj_set_value): Likewise.
* cli/cli-cmds.c (disassemble_command): Treat "arg" as const and
constify string handling.
Pass const pointers to parse_and_eval_address and
parse_to_comman_and_eval.
* cli/cli-utils.c (skip_to_space): Rename to ...
(skip_to_space_const): ... this. Handle const strings.
* cli/cli-utils.h (skip_to_space): Turn into macro which invokes
skip_to_space_const.
(skip_to_space_const): Declare.
* common/format.c (parse_format_string): Make "arg" const.
Handle const strings.
* common/format.h (parse_format_string): Make "arg" const.
* gdbserver/ax.c (ax_printf): Make "format" const.
* python/python.c (gdbpy_parse_and_eval): Do not make a copy
of the expression string.
(trace_pass_command): Likewise.
* cli/cli-cmds.c: Include cli/cli-utils.h.
(source_command): Use skip-spaces.
(disassemble_command): Likewise.
* findcmd.c: Include cli/cli-utils.h.
(parse_find_args): Use skip_spaces.
* go32-nat.c: Include cli/cli-utils.h.
(go32_sldt): Use skip_spaces.
(go32_sgdt): Likewise.
(go32_sidt): Likewise.
(go32_pde): Likewise.
(go32_pte): Likewise.
(go32_pte_for_address): Likewise.
* infcmd.c: Include cli/cli-utils.h.
(registers_info): Use skip_spaces.
* linux-tdep.c (read_mapping): Use skip_spaces_const.
(linux_info_proc): Likewise.
* linux-thread-db.c: Include cli/cli-utils.h.
(info_auto_load_libthread_db): Use skip_spaces_const.
* m32r-rom.c: Include cli/cli-utils.h.
(m32r_upload_command): Use skip_spaces.
* maint.c: Include cli/cli-utils.h.
(maintenance_translate_address): Use skip_spaces.
* mi/mi-parse.c: Include cli/cli-utils.h.
(mi_parse_argv): Use skip_spaces.
(mi_parse): Likewise.
* minsyms.c: Include cli/cli-utils.h.
(msymbol_hash_iw): Use skip_spaces_const.
* objc-lang.c: Include cli/cli-utils.h.
(parse_selector): Use skip_spaces.
(parse_method): Likewise.
* python/python.c: Include cli/cli-utils.h.
(python_interactive_command)[HAVE_PYTHON]: Use skip_spaces.
(python_command)[HAVE_PYTHON]: Likewise.
(python_interactive_command)[!HAVE_PYTHON]: Likewise.
* remote-m32r-sdi.c: Include cli/cli-utils.h.
(m32r_load): Use skip_spaces.
* serial.c: Include cli/cli-utils.h.
(serial_open): Use skip_spaces_const.
* stack.c: Include cli/cli-utils.h.
(parse_frame_specification_1): Use skip_spaces_const.
* symfile.c: Include cli/cli-utils.h.
(set_ext_lang_command): Use skip_spaces.
* symtab.c: Include cli/cli-utils.h.
(rbreak_command): Use skip_spaces.
* thread.c (thread_name_command): Use skip_spaces.
* tracepoint.c (validate_actionline): Use skip_spaces.
(encode_actions_1): Likewise.
(trace_find_range_command): Likewise.
(trace_find_outside_command): Likewise.
(trace_dump_actions): Likewise.
$ make WERROR_CFLAGS="-Wpointer-sign -Werror" breakpoint.o 2>&1 1>/dev/null
../../src/gdb/breakpoint.c: In function ‘breakpoint_xfer_memory’:
../../src/gdb/breakpoint.c:1578:2: error: pointer targets in passing argument 3 of ‘gdbarch_breakpoint_from_pc’ differ in signedness [-Werror=pointer-sign]
In file included from ../../src/gdb/defs.h:644:0,
from ../../src/gdb/breakpoint.c:20:
../../src/gdb/gdbarch.h:495:25: note: expected ‘int *’ but argument is of type ‘unsigned int *’
target_info.placed_size is an 'int', and gdbarch_breakpoint_from_pc
takes an int too.
gdb/
2013-03-07 Pedro Alves <palves@redhat.com>
* breakpoint.c.c (breakpoint_xfer_memory): Change type of local to
int.
* ada-lang.c (user_select_syms): Replace symtab->filename refererences
by symtab_to_filename_for_display calls.
* breakpoint.c (print_breakpoint_location, resolve_sal_pc): Likewise.
(clear_command): New variable sal_fullname, initialize it. Replace
compare_filenames_for_search by filename_cmp with sal_fullname.
(say_where, update_static_tracepoint): Replace symtab->filename
refererences by symtab_to_filename_for_display calls.
* cli/cli-cmds.c (edit_command, list_command, ambiguous_line_spec):
Likewise.
* dwarf2read.c: Include source.h.
(fixup_go_packaging): Replace symtab->filename refererences by
symtab_to_filename_for_display calls.
* linespec.c (add_sal_to_sals): Rename variable filename to fullname.
Replace symtab->filename refererences by symtab_to_filename_for_display
calls.
(create_sals_line_offset, convert_linespec_to_sals): New variable
fullname, initialize it, replace symtab->filename reference by the
variable.
* linux-fork.c: Include source.h.
(info_checkpoints_command): Replace symtab->filename refererences by
symtab_to_filename_for_display calls.
* macroscope.c (sal_macro_scope): Replace symtab->filename refererences
by symtab_to_filename_for_display calls.
* mdebugread.c: Include source.h.
(psymtab_to_symtab_1): Replace symtab->filename refererences by
symtab_to_filename_for_display calls.
* mi/mi-cmd-file.c (mi_cmd_file_list_exec_source_file)
(mi_cmd_file_list_exec_source_files): Likewise.
* printcmd.c: Include source.h.
(build_address_symbolic): Replace symtab->filename refererences by
symtab_to_filename_for_display calls.
* psymtab.c (partial_map_symtabs_matching_filename)
(read_psymtabs_with_fullname): Call compare_filenames_for_search also
with psymtab_to_fullname.
* python/py-symtab.c (stpy_str): Replace symtab->filename refererences
by symtab_to_filename_for_display calls.
(stpy_get_filename): New variable filename, initialize it, use instead
of symtab->filename refererences.
(salpy_str): Make variable filename const char *. Replace
symtab->filename refererences by symtab_to_filename_for_display calls.
* skip.c: Include source.h and filenames.h.
(skip_file_command): Remove const from the symtab variable. Replace
symtab->filename refererences by symtab_to_fullname call.
(function_name_is_marked_for_skip): New variables searched_for_fullname
and fullname. Use them to search also with symtab's fullname.
* source.c (find_source_lines): Replace symtab->filename refererences
by symtab_to_filename_for_display calls.
(print_source_lines_base): New variable filename, use it instead of
symtab->filename. Replace symtab->filename refererences by
symtab_to_filename_for_display calls.
(line_info, forward_search_command): Replace symtab->filename
refererences by symtab_to_filename_for_display calls.
(reverse_search_command): Replace symtab->filename refererences by
symtab_to_filename_for_display calls. New variable filename for it.
* stack.c (frame_info): Likewise.
* symmisc.c: Include source.h.
(dump_objfile, dump_symtab_1, maintenance_print_symbols)
(maintenance_info_symtabs): Replace symtab->filename refererences by
symtab_to_filename_for_display calls.
* symtab.c (iterate_over_some_symtabs): Call
compare_filenames_for_search also with symtab_to_fullname.
(lookup_symbol_aux_quick, basic_lookup_transparent_type_quick): Replace
symtab->filename refererences by symtab_to_filename_for_display calls.
(find_line_symtab): Replace symtab->filename refererences by
symtab_to_filename_for_display calls.
(file_matches): Replace filename_cmp by compare_filenames_for_search.
(print_symbol_info): Make the last parameter const char *. New
variable s_filename. Use it in the function.
(symtab_symbol_info): Make the last_filename variable const char *.
Replace symtab->filename refererences by symtab_to_filename_for_display
calls.
(rbreak_command): New variable fullname. Use it. Replace
symtab->filename refererence by symtab_to_filename_for_display call.
* tracepoint.c (set_traceframe_context, trace_find_line_command)
(print_one_static_tracepoint_marker): Replace symtab->filename
refererences by symtab_to_filename_for_display calls.
* tui/tui-source.c (tui_set_source_content): New variables filename and
s_filename. Replace symtab->filename refererences by this variable.
Replace other symtab->filename refererences by
symtab_to_filename_for_display calls.
Code cleanup.
* breakpoint.c (clear_command): Remove variable is_abs, unify the
call of filename_cmp with compare_filenames_for_search.
* dwarf2read.c (dw2_map_symtabs_matching_filename): Remove variable
is_abs, unify the call of FILENAME_CMP with
compare_filenames_for_search. New gdb_asserts for real_path and name.
Unify the call of compare_filenames_for_search with FILENAME_CMP.
* psymtab.c (partial_map_symtabs_matching_filename): Likewise.
* symfile.h (struct quick_symbol_functions): Extend the comment for
map_symtabs_matching_filename.
* symtab.c (compare_filenames_for_search): Remove the function comment
relative path requirement. Handle absolute filenames, with a comment.
(iterate_over_some_symtabs): Remove variable is_abs, unify the call of
FILENAME_CMP with compare_filenames_for_search. New gdb_asserts for
real_path and name. Unify the call of compare_filenames_for_search
with FILENAME_CMP.
(iterate_over_symtabs): New gdb_assert on REAL_PATH.
gdb/testsuite/
* gdb.mi/mi-fullname-deleted.exp: Use double last slash for $srcfileabs.
(compare_filenames_for_search does not match)
(compare_filenames_for_search does match): New tests.
Code cleanup.
* breakpoint.c (print_breakpoint_location): Replace bp_location field
source_file references by symtab field references. Remove variables
sal and fullname.
(momentary_breakpoint_from_master, add_location_to_breakpoint):
(clear_command, say_where): Replace bp_location field source_file
references by symtab field references.
(bp_location_dtor): Remove the source_file reference.
(update_static_tracepoint): Replace bp_location field source_file
references by symtab field references.
(breakpoint_free_objfile): New function.
* breakpoint.h (struct bp_location): Extend the comment for line_number.
Replace the field source_file by field symtab, extend its comment.
(breakpoint_free_objfile): New declaration.
* objfiles.c (free_objfile): Call breakpoint_free_objfile.
* tui/tui-winsource.c (tui_update_breakpoint_info): Replace bp_location
field source_file references by symtab field references.
observer_notify_breakpoints_changed calls. All, except the
init_raw_breakpoint one. But that one is actually wrong. The
breakpoint is being constructed at that point, and hasn't been placed
on the breakpoint chain yet. It would be better placed in
install_breakpoint, and I actually started out that way. But once the
annotate_breakpoints_changed are parallel to the observer calls, we
can fully move annotations to observers too.
One issue is that this changes the order of annotations a bit.
Before, we'd emit the annotation, and after call "mention()" on the
breakpoint (which prints the breakpoint number, etc.). But, we call
the observers _after_ mention is called, so the annotation output will
change a little:
void
install_breakpoint (int internal, struct breakpoint *b, int update_gll)
{
add_to_breakpoint_chain (b);
set_breakpoint_number (internal, b);
if (is_tracepoint (b))
set_tracepoint_count (breakpoint_count);
if (!internal)
mention (b);
observer_notify_breakpoint_created (b);
if (update_gll)
update_global_location_list (1);
}
I believe this order doesn't really matter (the frontend needs to wait
for the prompt anyway), so I just adjust the expected output in the
tests. Emacs in annotations mode doesn't seem to complain. Couple
that with the previous patch that suppressed duplicated annotations,
and, the fact that some annotations calls were actually missing (were
we do have observer calls), more changes to the tests are needed
anyway.
Tested on x86_64 Fedora 17.
gdb/
2013-01-22 Pedro Alves <palves@redhat.com>
* annotate.c (annotate_breakpoints_changed): Rename to ...
(annotate_breakpoints_invalid): ... this. Make static.
(breakpoint_changed): Adjust.
(_initialize_annotate): Always install the observers. Install a
"breakpoint_created" observer.
* annotate.h (annotate_breakpoints_changed): Delete declaration.
* breakpoint.c (set_breakpoint_condition)
(breakpoint_set_commands, do_map_commands_command)
(init_raw_breakpoint, clear_command, set_ignore_count)
(enable_breakpoint_disp): No longer call
annotate_breakpoints_changed.
gdb/testsuite/
2013-01-22 Pedro Alves <palves@redhat.com>
* gdb.base/annota1.exp (breakpoints_invalid): New variable.
Adjust tests to breakpoints-invalid changes.
* gdb.cp/annota2.exp (breakpoints_invalid, frames_invalid): New
variables.
Adjust tests to breakpoints-invalid changes.
suppress multiple breakpoints-invalid annotations when the ignore
count of a breakpoint changes, up until the target actually stops.
But, the code is bogus:
void
annotate_breakpoints_changed (void)
{
if (annotation_level == 2)
{
target_terminal_ours ();
printf_unfiltered (("\n\032\032breakpoints-invalid\n"));
if (ignore_count_changed)
ignore_count_changed = 0; /* Avoid multiple break annotations. */
}
}
The "ignore_count_changed" flag isn't actually guarding the output of
the annotation at all. It would have been better written something
like:
void
annotate_breakpoints_changed (void)
{
if (annotation_level == 2 && !ignore_count_changed)
{
target_terminal_ours ();
printf_unfiltered (("\n\032\032breakpoints-invalid\n"));
ignore_count_changed = 0; /* Avoid multiple break annotations. */
}
}
but, it wasn't. AFAICS, that goes all the way back to the original
patch'es submission and check in, at
<http://sourceware.org/ml/gdb-patches/1999-q4/msg00106.html>. I
looked a tar of HP's wdb from 1999, and even though that contains
local changes in the annotate code, this suppression seems borked
there too to me.
The original patch added a test to supposedly exercise this
suppression, but, it actually doesn't. It merely tests that
"breakpoints-invalid" is output after "stopped", but doesn't check
whether the duplicates supression actually works (IOW, check that only
_one_ annotation is seen). I was going to simply delete the tests
too, but a following patch will eliminate the duplicates in a
different way (which I needed for a different reason), so instead, I'm
making the tests actually fail if a duplicate annotation is seen.
Worry not, the test doesn't actually fail! The reason is that
breakpoint.c does:
else if (b->ignore_count > 0)
{
b->ignore_count--;
annotate_ignore_count_change ();
bs->stop = 0;
/* Increase the hit count even though we don't stop. */
++(b->hit_count);
observer_notify_breakpoint_modified (b);
}
where the annotate_ignore_count_change call is meant to inform the
"breakpoint_modified" annotation observer to ignore the notification.
All sounds good. But, the trouble is that nowadays annotate.c only
installs the observers if GDB is started with annotations enabled with
a command line option (gdb --annotate=2):
void
_initialize_annotate (void)
{
if (annotation_level == 2)
{
observer_attach_breakpoint_deleted (breakpoint_changed);
observer_attach_breakpoint_modified (breakpoint_changed);
}
}
and annota1.exp, to enable annotations, starts GDB normally, and
afterwards does "set annotate 2", so the observers aren't installed
when annota1.exp is run, and therefore changing the ignore count isn't
triggering any annotation at all...
gdb/
2013-01-22 Pedro Alves <palves@redhat.com>
* annotate.c (ignore_count_changed): Delete.
(annotate_breakpoints_changed): Don't clear ignore_count_changed.
(annotate_ignore_count_change): Delete.
(annotate_stopped): Don't emit a delayed breakpoints-changed
annotation.
* annotate.h (annotate_ignore_count_change): Delete.
* breakpoint.c (bpstat_check_breakpoint_conditions): Don't call
annotate_ignore_count_change.
gdb/testsuite/
2013-01-22 Pedro Alves <palves@redhat.com>
* gdb.base/annota1.exp (annotate ignore count change): Add
expected output for failure case.
* breakpoint.c (print_one_breakpoint_location): Add MI
field 'thread-groups' when printing a breakpoint.
(output_thread_groups): New function.
2013-01-21 Marc Khouzam <marc.khouzam@ericsson.com>
* gdb.texinfo (GDB/MI Breakpoint Commands): Document new
'thread-groups' field when printing a breakpoint in MI.
2013-01-21 Marc Khouzam <marc.khouzam@ericsson.com>
* gdb.mi/mi-break.exp: Expect new 'thread-groups' field.
* gdb.mi/mi-nsmoribund.exp: Expect new 'thread-groups' field.
Also handle 'thread' field.
* gdb.mi/mi-simplerun.exp: Expect new 'thread-groups' field.
* gdb.mi/mi-watch.exp: Ditto.
* lib/mi-support.exp: Ditto.
* breakpoint.c (print_one_breakpoint_location): Remove dead code.
(update_dprintf_command_list): Assert that 'printf_line' is
non-null. Remove condition check.
Two modifications:
1. The addition of 2013 to the copyright year range for every file;
2. The use of a single year range, instead of potentially multiple
year ranges, as approved by the FSF.
* breakpoint.c (breakpoint_re_set): Remove the skip_re_set call.
* infrun.c (handle_inferior_event): Rename the called function to
function_name_is_marked_for_skip, pass it TMP_SAL.
* skip.c (struct skiplist_entry): Update function_name comment. Remove
fields pc, gdbarch and pending.
(skip_function_pc): Rename this forward declaration to ...
(skip_function): ... here.
(skip_file_command): Remove variable pending and its use, remove
initialization of E fields pending and gdbarch. Do not use SYMTAB
filename, use the specified one.
(skip_function_command): Remove variable func_pc, do not set it.
Update the caller of skip_function. Replace decode_line_1 call by
a lookup_symbol call. Remove variables orig_arg, decode_exception and
sals. Update the caller of skip_function.
(skip_info): Remove variable address_width and its use. Do not print
address (PC). Renumber column 5 to 4.
(skip_function_pc): Rename to ...
(skip_function): ... here and remove its parameters pc, arch and
pending. Update the function comment and no longer use those
parameters.
(function_pc_is_marked_for_skip): Rename to ...
(function_name_is_marked_for_skip): ... here, update function comment
just to a skip.h reference, replace pc parameter by function_name and
function_sal. No longer use E field pending and pc. Remove variables
searched_for_sal, sal and filename. Call compare_filenames_for_search
instead of just strcmp.
(skip_re_set): Remove the function.
* skip.h (struct symtab_and_line): New declaration.
(function_pc_is_marked_for_skip): Rename to ...
(function_name_is_marked_for_skip): ... here, replace pc parameter by
function_name and function_sal, update the function comment.
gdb/testsuite/
* gdb.base/skip-solib.exp (info skip with pending file): Update the
expected output.
(info skip with pending file): Remove.
(ignoring function in solib, info skip for function multiply): Update
the expected output.
* gdb.base/skip.ex (skip (main), skip function baz, info skip)
(info skip (delete 1), info skip after disabling all)
(info skip after enabling all, info skip after disabling 4 2-3)
(info skip after enabling 2-3, info skip 2-3)
(info skip after deleting 2 3): Update the expected output.
* gdb.linespec/base/two/thefile.cc (n): New variable v, split the
statement to its initialization and return.
* gdb.linespec/skip-two.exp: New file.
Code cleanup.
* breakpoint.c (clear_command): Remove variable sal_name_len and its
initialization, remove it from the compare_filenames_for_search call.
* dwarf2read.c (dw2_map_symtabs_matching_filename): Remove variable
name_len and its initialization, remove it from the
compare_filenames_for_search calls.
* psymtab.c (partial_map_symtabs_matching_filename): Likewise.
* symtab.c (compare_filenames_for_search): Remove the search_len
parameter, update the function comment, new variable search_len
initialized from SEARCH_NAME.
(iterate_over_some_symtabs): Remove variable name_len and its
initialization, remove it from the compare_filenames_for_search calls.
* symtab.h (compare_filenames_for_search): Remove the search_len
parameter,
* breakpoint.c (print_one_breakpoint_location): Display the
state of 'installed' of each non-pending location of a tracepoint
in both CLI and MI.
(download_tracepoint_locations): Notify 'breakpoint-modified'
observer if any tracepoint location is downloaded.
* tracepoint.c (start_tracing): Likewise.
(merge_uploaded_tracepoints): Record all modified
tracepoints and notify 'breakpoint-modified' observer for them.
* NEWS: Mention the change for CLI and MI.
gdb/doc:
2012-12-15 Yao Qi <yao@codesourcery.com>
* gdb.texinfo (Listing Tracepoints): New item and example about
'installed on target' output.
Add more in the example about 'installed on target'.
(GDB/MI Breakpoint Commands): Doc about 'installed field.
gdb/testsuite:
2012-12-15 Yao Qi <yao@codesourcery.com>
* gdb.trace/mi-tracepoint-changed.exp (test_pending_resolved): Check
'installed' field in '=breakpoint-modified'.
(test_reconnect): Check 'installed' field in
'=breakpoint-modified' and '=breakpoint-created'.
* gdb.trace/actions.exp: Update test for 'installed' field.
* gdb.trace/change-loc.exp (tracepoint_change_loc_1):
(tracepoint_change_loc_2): Likewise.
Check 'info tracepoint' display nothing else.
* gdb.trace/deltrace.exp: Likewise.
* gdb.trace/infotrace.exp: Likewise.
* gdb.trace/mi-traceframe-changed.exp (test_tfind_remote):
Likewise.
* gdb.trace/passcount.exp: Likewise.
* gdb.trace/tracecmd.exp: Likewise.
* gdb.trace/while-stepping.exp: Likewise.
2012-12-15 Yao Qi <yao@codesourcery.com>
* breakpoint.c (download_tracepoint_locations): Iterate over
ALL_TRACEPOINTS first and then iterate over locations of
each tracepoint.
They are equivalent to "catch load" and "catch unload" from CLI.
Rationale: GUIs might be interested in catching solib load or
unload events.
2012-11-16 Mircea Gherzan <mircea.gherzan@intel.com>
* Makefile.in (SUBDIR_MI_OBS): Add mi-cmd-catch.o.
(SUBDIR_MI_SRCS): Add mi/mi-cmd-catch.c.
* breakpoint.c (add_solib_catchpoint): New function that
can be used by both CLI and MI, factored out from
catch_load_or_unload.
(catch_load_or_unload): Strip it down and make it use the
new add_solib_catchpoint.
* breakpoint.h (add_solib_catchpoint): Declare it.
* mi/mi-cmd-break.h: New file.
* mi/mi-cmd-break.c: Include mi-cmd-break.h.
(setup_breakpoint_reporting): New function used for both
catchpoints and breakpoints.
(mi_cmd_break_insert): Use setup_breakpoint_reporting.
* mi/mi-cmd-catch.c: New file.
* mi/mi-cmds.c (mi_cmds): Add the handlers for -catch-load
and -catch-unload.
* mi/mi-cmds.h: Declare the handlers for -catch-load and
-catch-unload.
* breakpoint.c: Declare set_tracepoint_count.
(install_breakpoint): Call set_tracepoint_count if B is a
tracepoint.
(trace_command): Don't call set_tracepoint_count. Re-indent.
(strace_command, ftrace_command):
(create_tracepoint_from_upload): Likewise.
gdb/testsuite:
2012-11-09 Yao Qi <yao@codesourcery.com>
* gdb.mi/mi-break.exp (test_abreak_creation): New procedure.
(top level): Call it
gdb/ChangeLog
* breakpoint.c (update_global_location_list): Ignore previous
duplicate status of a breakpoint when starting a new scan for
duplicate breakpoints.
gdb/testsuite/ChangeLog
* gdb.base/duplicate-bp.c: New file.
* gdb.base/duplicate-bp.exp: New file.
* breakpoint.c (invalidate_bp_value_on_memory_change): Expand
parameter LEN to ssize_t.
gdb/doc/ChangeLog:
observer.texi (memory_changed): Expand parameter LEN to ssize_t.
Code cleanup - rename 'inline' depth to 'artificial' depth.
* breakpoint.c (set_momentary_breakpoint): Rename at a caller to
frame_id_artificial_p, extend the comment.
* dwarf2-frame-tailcall.c (tailcall_frame_this_id): Rename at a user.
* frame.c (fprint_frame_id): Rename at a user, change debug output
text to "artificial=".
(skip_inlined_frames): Rename to ...
(skip_artificial_frames): ... here. Extend the comment.
(get_stack_frame_id, frame_unwind_caller_id): Rename at a caller.
(frame_id_inlined_p): Rename to ...
(frame_id_artificial_p): ... here. Rename at a user.
(frame_id_eq, frame_id_inner, frame_unwind_caller_pc)
(frame_unwind_caller_pc_if_available, frame_unwind_caller_arch): Rename
at a user.
* frame.h (struct frame_id): Rename inline_depth to artificial_depth.
Extend the comment.
(frame_id_inlined_p): Rename to ...
(frame_id_artificial_p): ... here.
* inline-frame.c (inline_frame_this_id): Rename at a user.
there is an error inserting hardware breakpoints and use the
error message from the target.
* gdb/breakpoint.c (insert_bp_location, insert_breakpoint_locations):
Catch this exception and print the error message contained within. Do not
print the default hardware error breakpoint message in this case.
* breakpoint.c (parse_breakpoint_sals) <(*address) == NULL>: New
variable pc. Call find_pc_line instead of find_pc_overlay, restore
original PC for it.
gdb/testsuite/
* gdb.base/break-caller-line.c: New file.
* gdb.base/break-caller-line.exp: New file.
Before this change, detach_breakpoints would take a pid, and then
set inferior_ptid to a ptid that it constructs using pid_to_ptid (pid).
Unfortunately, this ptid is not necessarily valid. Consider for
instance the case of ia64-hpux, where ttrace refuses a register-read
operation if the LWP is not provided.
This problems shows up when GDB is trying to handle fork events.
Assuming GDB is configured to follow the parent, GDB will try to
detach from the child. But before doing so, it needs to remove
all breakpoints inside that child. On ia64, this involves reading
inferior (the child's) memory. And on ia64-hpux, reading memory
requires us to read the bsp and bspstore registers, in order to
determine where that memory is relative to the value of those
registers, and thus to determine which ttrace operation to use in
order to fetch that memory (see ia64_hpux_xfer_memory).
This patch therefore changes detach_breakpoints to take a ptid instead
of a pid, and then updates all callers.
One of the consequences of this patch is that it trips an assert
on GNU/Linux targets. But this assert appears to have not actual
purpose, and is thus removed.
gdb/ChangeLog:
* breakpoint.h (detach_breakpoints): pid parameter is now a ptid.
* breakpoint.c (detach_breakpoints): Change pid parameter into
a ptid. Adjust code accordingly.
* infrun.c (handle_inferior_event): Delete variable child_pid.
Update call to detach_breakpoints to pass the child ptid for
fork events.
* linux-nat.c (linux_nat_iterate_watchpoint_lwps): Remove
assert that inferior_ptid's lwp is zero.
(linux_handle_extended_wait): Update call to detach_breakpoints.
* inf-ttrace.c (inf_ttrace_follow_fork): Update call to
detach_breakpoints.
* cli/cli-cmds.c (enablebreaklist): Move it to breakpoint.c.
(skiplist): Move it to skip.c.
(init_cmd_lists): Remove code setting enablebreaklist and
skiplist to NULL.
* breakpoint.c (enablebreaklist): Moved from cli/cli-cmds.c.
* cli/cli-cmds.h: Remove declaration of enablebreaklist and
skiplist.
* gdbcmd.h: Likewise.
* skip.c (_initialize_step_skip): Move 'skiplist' from
cli/cli-cmds.c.
TASK and REST.
(create_breakpiont): find_condition_and_thread will now
initialize COND_STRING, THREAD, and REST (and TASK).
(addr_string_to_sals): Likewise.
(decode_line_with_current_source): Moved here from symtab.c and
renamed from decode_line_spec. All callers updated.
(decode_line_with_last_displayed): Moved here from breakpoint.c and
renamed from decode_line_spec_1. All callers updated.
* linespec.h (decode_line_with_current_source): Move declaration here
from symtab.h and renamed from decode_line_spec.
(decode_line_with_last_displayed): Move declaration here from symtab.h
and renamed from decode_line_spec_1.
* macrocmd.c: #include "linespec.h".
* symtab.c: Remove #include "linespec.h".
Remove stale dummy frames.
* breakpoint.c: Include dummy-frame.h.
(longjmp_breakpoint_ops): New variable.
(update_breakpoints_after_exec, breakpoint_init_inferior): Delete also
bp_longjmp_call_dummy.
(bpstat_what, bptype_string, print_one_breakpoint_location)
(init_bp_location): Support bp_longjmp_call_dummy.
(set_longjmp_breakpoint): Use longjmp_breakpoint_ops. Comment why.
(set_longjmp_breakpoint_for_call_dummy)
(check_longjmp_breakpoint_for_call_dummy, longjmp_bkpt_dtor): New
functions.
(initialize_breakpoint_ops): Initialize longjmp_breakpoint_ops.
* breakpoint.h (enum bptype): New item bp_longjmp_call_dummy. Delete
FIXME comment and extend the other comment for bp_call_dummy.
(set_longjmp_breakpoint_for_call_dummy)
(check_longjmp_breakpoint_for_call_dummy): New declarations.
* dummy-frame.c: Include gdbthread.h.
(pop_dummy_frame_bpt): New function.
(pop_dummy_frame): Call pop_dummy_frame_bpt.
(dummy_frame_discard): New function.
(cleanup_dummy_frames): Update the comment about longjmps.
* dummy-frame.h (dummy_frame_discard): New declaration.
* gdbthread.h (struct thread_info): Extend initiating_frame comment.
* infcall.c (call_function_by_hand): New variable longjmp_b. Call
set_longjmp_breakpoint_for_call_dummy. Chain its breakpoints with BPT.
* infrun.c (handle_inferior_event) <BPSTAT_WHAT_CLEAR_LONGJMP_RESUME>:
Add case 4 comment. Call check_longjmp_breakpoint_for_call_dummy and
keep_going if IS_LONGJMP and there is no other reason to stop.
gdb/testsuite/
Remove stale dummy frames.
* gdb.base/call-signal-resume.exp (maintenance print dummy-frames)
(maintenance info breakpoints): New tests.
* gdb.base/stale-infcall.c: New file.
* gdb.base/stale-infcall.exp: New file.
(_initialize_breakpoint): Use it.
* value.c (complete_internalvar): New function.
* value.h (complete_internalvar): Declare.
testsuite
* gdb.base/condbreak.exp: Add tests for "condition" completion.
* breakpoint.h: Include command.h.
(add_catch_command): Use completer_ftype.
* cli/cli-decode.c (set_cmd_completer): Use completer_ftype.
* cli/cli-decode.h (struct cmd_list_element) <completer>:
Use completer_ftype.
* command.h (completer_ftype): New typedef.
(set_cmd_completer): Use it.
* python/py-cmd.c (struct cmdpy_completer) <completer>: Use
completer_ftype.
Fix regression by the "ambiguous linespec" series.
* breakpoint.c (parse_breakpoint_sals): New variable cursal. Use
get_last_displayed_symtab and get_last_displayed_line and depending
on CURSAL.
gdb/testsuite/
Fix regression by the "ambiguous linespec" series.
* gdb.base/break.exp (list marker1, break lineno, delete $bpnum): New
tests.
With an Ada program, trying to break on a specific Ada task, but
with the wrong capitalization of the `task' keyword, we currently
get only pieces of the "garbage" that caused the error:
(gdb) b *rendez_vous'address TASK 2
Garbage 2 at end of command
Pushing this a little further:
(gdb) b *rendez_vous'address TASK Task TaSK 2
Garbage 2 at end of command
Another interesting failure mode:
(gdb) b *rendez_vous'address TASK if
Argument required (expression to compute).
The parser skipped `TASK', then found the `if' keyword, and thus
started looking for a condition.
This patch fixes the problem by aborting the parsing as soon as
an invalid keyword is found. This makes it consistent with the
case where the REST parameter is passed as NULL (where an error
is raised immediately after seeing the first invalid keyword).
It also introduces a new testcase that reproduces all above scenarios.
gdb/ChangeLog:
* breakpoint.c (find_condition_and_thread): Stop parsing
as soon as the first invalid keyword is found.
gdb/testsuite/ChangeLog:
* gdb.ada/bad-task-bp-keyword: New testcase.
* breakpoint.h (bp_location): Add related_address member.
* inferior.h (get_return_value): Take a pointer to struct value
instead of struct type for the function requested.
* value.h (using_struct_return): Likewise.
* gdbarch.sh (return_value): Take a pointer to struct value
instead of struct type for the function requested.
* breakpoint.c (set_breakpoint_location_function): Initialize
related_address for bp_gnu_ifunc_resolver breakpoints.
* elfread.c (elf_gnu_ifunc_resolver_return_stop): Pass the
requested function's address to gdbarch_return_value.
* eval.c (evaluate_subexp_standard): Pass the requested
function's address to using_struct_return.
* infcall.c (call_function_by_hand): Pass the requested
function's address to using_struct_return and
gdbarch_return_value.
* infcmd.c (get_return_value): Take a pointer to struct value
instead of struct type for the function requested.
(print_return_value): Update accordingly.
(finish_command_continuation): Likewise.
* stack.c (return_command): Pass the requested function's
address to using_struct_return and gdbarch_return_value.
* value.c (using_struct_return): Take a pointer to struct value
instead of struct type for the function requested. Pass the
requested function's address to gdbarch_return_value.
* python/py-finishbreakpoint.c (finish_breakpoint_object):
New function_value member, replacing function_type.
(bpfinishpy_dealloc): Update accordingly.
(bpfinishpy_pre_stop_hook): Likewise.
(bpfinishpy_init): Likewise. Record the requested function's
address.
* mips-tdep.c (mips_fval_reg): New enum.
(mips_o32_push_dummy_call): For MIPS16 FP doubles do not swap
words put in GP registers.
(mips_o64_push_dummy_call): Update a comment.
(mips_o32_return_value): Take a pointer to struct value instead
of struct type for the function requested and use it to check if
using the MIPS16 calling convention. Return the designated
general purpose registers for floating-point values returned in
MIPS16 mode.
(mips_o64_return_value): Likewise.
* ppc-tdep.h (ppc_sysv_abi_return_value): Update prototype.
(ppc_sysv_abi_broken_return_value): Likewise.
(ppc64_sysv_abi_return_value): Likewise.
* alpha-tdep.c (alpha_return_value): Take a pointer to struct
value instead of struct type for the function requested.
* amd64-tdep.c (amd64_return_value): Likewise.
* amd64-windows-tdep.c (amd64_windows_return_value): Likewise.
* arm-tdep.c (arm_return_value): Likewise.
* avr-tdep.c (avr_return_value): Likewise.
* bfin-tdep.c (bfin_return_value): Likewise.
* cris-tdep.c (cris_return_value): Likewise.
* frv-tdep.c (frv_return_value): Likewise.
* h8300-tdep.c (h8300_return_value): Likewise.
(h8300h_return_value): Likewise.
* hppa-tdep.c (hppa32_return_value): Likewise.
(hppa64_return_value): Likewise.
* i386-tdep.c (i386_return_value): Likewise.
* ia64-tdep.c (ia64_return_value): Likewise.
* iq2000-tdep.c (iq2000_return_value): Likewise.
* lm32-tdep.c (lm32_return_value): Likewise.
* m32c-tdep.c (m32c_return_value): Likewise.
* m32r-tdep.c (m32r_return_value): Likewise.
* m68hc11-tdep.c (m68hc11_return_value): Likewise.
* m68k-tdep.c (m68k_return_value): Likewise.
(m68k_svr4_return_value): Likewise.
* m88k-tdep.c (m88k_return_value): Likewise.
* mep-tdep.c (mep_return_value): Likewise.
* microblaze-tdep.c (microblaze_return_value): Likewise.
* mn10300-tdep.c (mn10300_return_value): Likewise.
* moxie-tdep.c (moxie_return_value): Likewise.
* mt-tdep.c (mt_return_value): Likewise.
* ppc-linux-tdep.c (ppc_linux_return_value): Likewise.
* ppc-sysv-tdep.c (ppc_sysv_abi_return_value): Likewise.
(ppc_sysv_abi_broken_return_value): Likewise.
(ppc64_sysv_abi_return_value): Likewise.
* ppcnbsd-tdep.c (ppcnbsd_return_value): Likewise.
* rl78-tdep.c (rl78_return_value): Likewise.
* rs6000-aix-tdep.c (rs6000_return_value): Likewise.
* rx-tdep.c (rx_return_value): Likewise.
* s390-tdep.c (s390_return_value): Likewise.
* score-tdep.c (score_return_value): Likewise.
* sh-tdep.c (sh_return_value_nofpu): Likewise.
(sh_return_value_fpu): Likewise.
* sh64-tdep.c (sh64_return_value): Likewise.
* sparc-tdep.c (sparc32_return_value): Likewise.
* sparc64-tdep.c (sparc64_return_value): Likewise.
* spu-tdep.c (spu_return_value): Likewise.
* tic6x-tdep.c (tic6x_return_value): Likewise.
* v850-tdep.c (v850_return_value): Likewise.
* vax-tdep.c (vax_return_value): Likewise.
* xstormy16-tdep.c (xstormy16_return_value): Likewise.
* xtensa-tdep.c (xtensa_return_value): Likewise.
* gdbarch.c: Regenerate.
* gdbarch.h: Regenerate.
gdb/testsuite/
* gdb.base/return-nodebug.exp: Also test float and double types.
Mostly removing trailing spaces at end of lines, and also adding
an empty line after the function's documentation.
gdb/ChangeLog:
* breakpoint.c (find_condition_and_thread): Minor reformatting.
Tom Tromey <tromey@redhat.com>
* breakpoint.c (struct breakpoint_objfile_data)
<longjmp_searched>,<longjmp_probes>,<exception_searched>,
<exception_probes>: New fields.
(free_breakpoint_probes): New function.
(create_longjmp_master_breakpoint): Prefer SystemTap probe over
`_Unwind_DebugHook'.
(create_exception_master_breakpoint): Likewise.
(_initialize_breakpoint): Registering cleanup for SystemTap probes.
* infrun.c: Including necessary header files for handling SystemTap
probes.
(handle_inferior_event): Handling longjmp breakpoint and exceptions
via SystemTap probes.
(check_exception_resume): Remove `func' argument. Handle exception
unwinding breakpoint set via a SystemTap probe.
(insert_exception_resume_from_probe): New function.
Revert this patch to allow breakpoint always-inserted
in record target.
2011-12-05 Pedro Alves <pedro@codesourcery.com>
* breakpoint.c: Include record.h.
(breakpoints_always_inserted_mode): Return false when the record
target is in use.
* breakpoint.c (iterate_over_bp_locations): New.
* breakpoint.h: Declare.
New typedef walk_bp_location_callback.
* record.c (record_open): Call record_init_record_breakpoints.
(record_sync_record_breakpoints): New.
(record_init_record_breakpoints): New.
* NEWS: Mention supporting breakpoint always-inserted mode in
record target.
When debugging on Windows with GDBserver, the debugger starts
failing after hitting a breakpoint. For instance:
(gdb) b foo
Breakpoint 1 at 0x40177e: file foo.adb, line 5.
(gdb) cont
Continuing.
Breakpoint 1, foo () at foo.adb:5
5 Put_Line ("Hello World."); -- STOP
(gdb) n
Program received signal SIGSEGV, Segmentation fault.
0x00401782 in foo () at foo.adb:5
5 Put_Line ("Hello World."); -- STOP
There are two issues:
1. While trying to re-insert a breakpoint that is still inserted
in memory, insert_bp_location wipes out the breakpoint location's
shadow_contents. As a consequence, we cannot restore the proper
instruction when removing the breakpoint anymore. That's why
the inferior's behavior changes when trying to resume after
the breakpoint was hit.
2. mem-break.c:default_memory_insert_breakpoint passes a breakpoint
location's shadow_contents as the buffer for a memory read.
This reveals a limitation of the various memory-read target
functions. This patch documents this limitation and adjust
the two calls that seem to hit that limitation.
gdb/ChangeLog:
* breakpoint.c (breakpoint_xfer_memory): Add assertion.
Update function description.
(insert_bp_location): Do not wipe bl->target_info out.
* mem-break.c: #include "gdb_string.h".
(default_memory_insert_breakpoint): Do not call target_read_memory
with a pointer to the breakpoint's shadow_contents buffer. Use
a local buffer instead.
* m32r-tdep.c (m32r_memory_insert_breakpoint): Ditto.
The 3 valid values for this setting are "auto", "host" and "target".
The help was advertising one of them to be "gdb" instead of "host".
gdb/ChangeLog:
* breakpoint.c (_initialize_breakpoint): Fix error in help of
"set breakpoint condition-evaluation" command.
Pedro Alves <palves@redhat.com>
PR breakpoints/13776:
* breakpoint.c (breakpoint_init_inferior): Delete step-resume
breakpoints.
(delete_longjmp_breakpoint_at_next_stop): New.
* breakpoint.h (delete_longjmp_breakpoint_at_next_stop): Declare.
* target.c (generic_mourn_inferior): Call mark_breakpoints_out
before deleting the inferior. Add comments.
* thread.c (clear_thread_inferior_resources): Don't delete lonjmp
breakpoints immediately, but only on next stop. Move that code
next to where we mark other breakpoints for deletion.