* config/ia64/ia64.mt: New file.
* config/alpha/alpha.mt: New file.
* MAINTAINERS: Change the alpha target to alpha-elf and IA-64 to
ia64-linux-gnu. Mention that ia64-elf is broken.
* configure.tgt: Add alpha*-*-* and ia64*-*-* patterns.
* config/ia64/ia64.mt: New file.
* config/alpha/alpha.mt: New file.
* MAINTAINERS: Change the alpha target to alpha-elf and IA-64 to
ia64-linux-gnu. Mention that ia64-elf is broken.
* configure.tgt: Add alpha*-*-* and ia64*-*-* patterns.
procfs appears to be broken when debugging on multi-processor
machines. So enable software single stepping in order to avoid
using the procfs interface to do next/step operations, using
internal breakpoints instead.
* infrun.c (handle_inferior_event): Readjust the stop_pc by
DECR_PC_AFTER_BREAK when hitting a single step breakpoint, to
make this pc address equal to the value it would have if the
system stepping capability was used. Also set a new flag used
to ensure that we don't readjust the PC one more time later.
* breakpoint.c (bpstat_stop_status): Do not adjust the PC
address by DECR_PC_AFTER_BREAK when software single step is
in use for this architecture, as this has already been taken
care of in handle_inferior_event().
* Makefile.in (copying.o): Separate out compile rule.
(hpux-thread.o, procfs.o, signals.o): Ditto.
(v850ice.o, z8k-tdep.o): Ditto.
(tui-file.o): Move to TUI section.
(xdr_ptrace.o, xdr_rdb.o, xdr_ld.o): Move to separate section.
(nindy.o, Onindy.o, ttyflush.o): Move to separate section.
signal, check whether we hit a breakpoint before checking for a
single step breakpoint. Otherwise, GDB fails to notice that a
breakpoint has been hit when stepping onto a breakpoint.
* config/mips/tm-mips.h (FUNCTION_START_OFFSET, IN_SIGTRAMP,
REGISTER_VIRTUAL_SIZE): Delete.
(REGISTER_CONVERT_FROM_TYPE, REGISTER_CONVERT_TO_TYPE): Convert
from macros to functions.
* mips-tdep.c (mips_register_convert_from_type,
mips_register_convert_to_type): New functions.
(mips_gdbarch_init): Set up function_start_offset,
register_virtual_size, pc_in_sigtramp.
* config/mips/tm-mips.h (REGISTER_CONVERT_TO_VIRTUAL,
REGISTER_CONVERT_TO_RAW, REGISTER_CONVERTIBLE,
MAX_REGISTER_RAW_SIZE, MAX_REGISTER_VIRTUAL_SIZE): Delete.
* mips-tdep.c (mips_gdbarch_init): Set the above in the gdbarch.
(mips_register_convertible, mips_register_convert_to_virtual,
mips_register_convert_to_raw): Make static.
* config/i386/nm-i386gnu.h: New file.
(THREAD_STATE_FLAVOR, THREAD_STATE_SIZE,
THREAD_STATE_SET_TRACED, THREAD_STATE_CLEAR_STATE, ATTACH_DETACH):
Moved here from ...
* config/i386/tm-i386gnu.h: ... here. Removed.
* config/i386/xm-i386gnu.h: Removed.
* config/i386/i386gnu.mh (XM_FILE): Set to xm-i386.h.
(NAT_FILE): Set to nm-i386gnu.h.
* config/i386/i386gnu.mt (TDEPFILES): Add i386gnu-tdep.o.
* i386-tdep.c: New file.
* Makefile.in (ALLDEPFILES): Add i386gnu-nat.c and i386gnu-tdep.c.
(i386gnu-tdep.o): Specify dependencies.
"i386/tm-i386.h", "i386/tm-i386v.h" and "config/tm-sysv.h".
Adjust a few comments to reflect reality a bit closer.
(KERNEL_U_SIZE, TARGET_HAS_HARDWARE_WATCHPOINTS,
TARGET_CAN_USE_HARDWARE_WATCHPOINT, HAVE_CONTINUEABLE_WATCHPOINT,
HAVE_STEPPABLE_WATCHPOINT, STOPPED_BY_WATCHPOINT,
target_insert_watchpoint, target_remove_watchpoint):
Move defines to ...
* config/i386/nm-i386sco5.h: ... here.
(kernel_u_size): Add prototype. Improve a few comments and add
protection against multiple inclusion.
* i387-tdep.c (print_i387_value, print_i387_ext,
print_i387_status_word, print_i387_control_word): Add `struct
ui_file *' argument and use it for output.
(i387_print_float_info): Renamed from i387_float_info. Add
`struct gdbarch *' and `struct ui_file *' arguments and use the
latter for output.
* i386-tdep.c: Include "i387-tdep.h".
(i386_gdbarch_init): Set print_float_info.
* config/i386/tm-i386.h (i387_float_info): Remove prototype.
(FLOAT_INFO): Remove define.
* mips-tdep.c (mips_push_arguments): Rename to
mips_eabi_push_arguments, and tune for EABI.
(MIPS_REGS_HAVE_HOME_P): Delete.
(struct gdbarch_tdep): Remove mips_regs_have_home_p field.
(mips_gdbarch_init): Set gdbarch push_arguments for eabi.
Delete references to mips_regs_have_home_p.
* mips-tdep.c (mips_o32o64_push_arguments): New function,
cloned from mips_push_arguments, tuned for o32/o64 ABI.
(mips_gdbarch_init): Set gdbarch_push_arguments to new func.
* regcache.c (init_regcache_descr): Overallocate the
raw_register_valid_p array including space for NUM_PSEUDO_REGS.
(registers_changed): Replace NUM_REGS+NUM_PSEUDO_REGS with
num_raw_registers.
(set_register_cached): Add range checking assertions. Use
current_regcache.
(M68HC12_HARD_PC_REGNUM): Define specific PC for 68HC12 (pseudo reg).
(m68hc11_pseudo_register_read): Compute the 68HC12 PC using the
real PC and the page number (if it's within the memory bank window).
(m68hc11_pseudo_register_write): Likewise when saving.
(m68hc11_register_name): Name the virtual pc 'pc' and the real one ppc.
(m68hc11_register_virtual_type): Return uint32 for virtual pc.
(m68hc11_register_raw_size): And use 32-bit for it.
(m68hc11_gdbarch_init): Use 32-bit address for 68HC12 if the
16K memory bank is used by the prog; also use the virtual pc.
(m68hc11_gdbarch_init): Install it in gdbarch.
(MSYMBOL_SET_RTC, MSYMBOL_SET_RTI): New to set symbol specific flags.
(MSYMBOL_IS_RTC, MSYMBOL_IS_RTI): New to test these flags.
(MSYMBOL_SIZE): New for documentation.
(insn_return_kind): Enum to specify how a function returns.
(frame_extra_info): Cleanup and record the return mode.
(gdbarch_tdep, USE_PAGE_REGISTER): New to control the use of page
register in address computation.
(m68hc11_get_return_insn): New to obtain the return instruction used
by the function.
(m68hc11_frame_init_saved_regs): Take into account the return
instruction used by the function for far and interrupt functions.
(m68hc11_init_extra_frame_info): Take into account page register.
(m68hc11_frame_args_address): Adjust according to the return mode.
(show_regs): Print page register only when it's used.
(M68HC11_LAST_HARD_REG, m68hc11_register_names): Update.
(m68hc11_register_virtual_type): Return a 8-bit type for 8-bit
registers.
(m68hc11_register_raw_size): Likewise.
* i386-tdep.c (i386_register_name): Handle mmx registers.
(mmx_regnum_p): New function.
(i386_mmx_names): New array.
(mmx_num_regs): New variable.
(i386_pseudo_register_read): New function.
(i386_pseudo_register_write): New function.
(mmx_regnum_to_fp_regnum): New function. Code from Fernando Nasser.
* regcache.c (regcache_raw_read_unsigned): New function.
(regcache_raw_read_signed): New function.
* regcache.h (regcache_raw_read_unsigned): Declare.
(regcache_raw_read_signed): Declare.
(to_fixed_variant_branch_type) (find_line_in_linetable): Fix
prototype names so that grep ^func works properly.
* ada-lang.c (ada_array_element_type)
(ada_lookup_partial_symbol): Fix typos in parameter list.
* ada-valprint.c (val_print_packed_array_elements) (ada_val_print_1):
Fix prototype names so that grep ^func works properly.
Elena Zannoni <ezannoni@redhat.com>
Martin M. Hunt <hunt@redhat.com>
* gdbtypes.c (build_builtin_type_vec128): Set the vector bit.
(build_builtin_type_vec128i): Set the vector bit.
* gdbtypes.h (builtin_type_vec64, builtin_type_vec64i): Declare.
* gdbtypes.c (builtin_type_vec64, builtin_type_vec64i): Define.
(build_builtin_type_vec64): New function.
(build_builtin_type_vec64i): New function.
(build_gdbtypes): Initialize builtin_type_vec64 and
builtin_type_vec64i.
* mips-tdep.c (ROUND_DOWN, ROUND_UP): Move to global scope.
(mips_push_arguments): Correct some comments. Use paddr_nz
for printing addresses in debug output. Replace static
allocation using MAX_REGISTER_RAW_SIZE with alloca.
(mips_n32n64_push_arguments): New function, cloned from
mips_push_arguments and tuned for the n32/n64 ABI.
(mips_push_register): Buffer needs dynamic allocation.
(mips_print_register): Ditto.
(do_gp_register_row): Ditto.
(mips_store_return_value): Ditto.
(mips_gdbarch_init): Set gdbarch_push_arguments per ABI.
T-packets; the 'a' is not taken as a register number.
(remote_check_watch_resources, remote_stopped_by_watchpoint)
(remote_stopped_data_address): New functions; add to target
vector.
(remote_insert_hw_breakpoint, remote_remove_hw_breakpoint): Change
prototypes to match other implementations of this
function. replace integer argument with pointer -- the length
field in the Z-packet is the length of what is pointed to or 1 if
pointer is null. Add to target vector.
(remote_insert_watchpoint, remote_remove_watchpoint): Add to
target vector.
From Mark Salter:
* remote.c (remote_wait): Add support to extract optional
watchpoint information from T-packet. Ignore unrecognized
optional info in T-packet.
(remote_async_wait): Ditto.
doc:
From Mark Salter:
* gdb.texinfo (Protocol): Document T packet extension to
allow watchpoint address reporting.
* mips-tdep.c (mips_find_saved_regs): Adjust stack according
to MIPS_SAVED_REGSIZE, not GDB_TARGET_IS_MIPS64. Enhance comment.
(mips_gdbarch_init): Set N32 target to be mips64.
Mark Kettenis
Andrew Cagney
gdbadmin
Joel Brobecker
Keith Seitz
Grace Sainsbury
Michael Snyder
Tom Tromey
Kevin Buettner
Stephane Carrez
Aidan Skinner
Don Howard
Corinna Vinschen