Remove note on "set print symbol-loading".
* main.c (captured_main): Pass !batch for from_tty when calling
symbol_file_add_main.
* objfiles.h (objfile_has_partial_symbols): Declare.
(objfile_has_full_symbols): Declare.
* objfiles.c (objfile_has_partial_symbols): New function.
(have_partial_symbols): Use it.
(objfile_has_full_symbols): New function.
(have_full_symbols): Use it.
* solib.c: Include interps.h.
(solib_read_symbols): Back out patch of 2008-07-10.
Add test for info_verbose for symbol loading messages for
consistency with symfile.c.
(info_sharedlibrary_command): Handle optional parameter of regex of
libraries to list. Inform user of libraries without debugging info.
Rewrite to use ui_out routines to format output.
* symfile.c (print_symbol_loading): Delete.
(symbol_file_add_with_addrs_or_offsets): Back out patch of 2008-07-10.
Print "no debugging symbols found" only if from_tty || info_verbose;
and only check file being loaded, not all files.
(reread_symbols): Test file being loaded for whether it has symbols,
not all files.
(__initialize_symfile): Delete `set print symbol-loading'.
* symfile.h (print_symbol_loading): Delete.
* doc/gdb.texinfo (Symbols): Delete `set print symbol-loading'.
(Files): Add note on new optional regex arg to `info sharedlibrary'.
* NEWS: Announce JIT interface.
* Makefile.in (SFILES): Add jit.c.
(HFILES_NO_SRCDIR): Add jit.h.
(COMMON_OBS): Add jit.o.
* jit.c: New file.
* jit.h: New file.
* breakpoint.h (enum bptype): Add bp_jit_event to enum.
* breakpoint.c:
(update_breakpoints_after_exec): Delete jit breakpoints after exec.
(bpstat_what): Update event table for bp_jit_event.
(print_it_typical): Added case for bp_jit_event.
(print_one_breakpoint_location): Added case for bp_jit_event.
(allocate_bp_location): Added case for bp_jit_event.
(mention): Added case for bp_jit_event.
(delete_command): Added case for bp_jit_event.
(breakpoint_re_set_one): Added case for bp_jit_event.
(breakpoint_re_set): Added call to jit_inferior_created_hook.
(create_jit_event_breakpoint): New.
* infrun.c (handle_inferior_event): Add handler for jit event.
(follow_exec): Add call to jit_inferior_created_hook.
* doc/gdb.texinfo: Add chapter on JIT interface.
* target.h (enum strata): New value arch_stratum.
* target.c (target_require_runnable): Skip arch_stratum targets.
* configure.tgt (powerpc-*-linux* | powerpc64-*-linux*): Add
solib-spu.o and spu-multiarch.o to gdb_target_obs.
* Makefile.in (ALL_TARGET_OBS): Add solib-spu.o and spu-multiarch.o.
(ALLDEPFILES): Add solib-spu.c and spu-multiarch.c.
* solib-spu.c: New file.
* solib-spu.h: New file.
* spu-multiarch.c: New file.
* spu-tdep.h (SPUADDR, SPUADDR_SPU, SPUADDR_ADDR): New macros.
* spu-tdep.c (struct gdbarch_tdep): New member id.
(spu_gdbarch_id): New function.
(spu_lslr): New function.
(spu_address_to_pointer): New function.
(spu_pointer_to_address): Support SPU ID address encoding. Use
spu_gdbarch_id and spu_lslr.
(spu_integer_to_address): Likewise.
(spu_frame_unwind_cache): Update for encoded addresses.
(spu_unwind_pc, spu_unwind_sp): Likewise.
(spu_read_pc, spu_write_pc): Likewise.
(spu_push_dummy_call): Likewise.
(spu_software_single_step): Likewise.
(spu_get_longjmp_target): Likewise.
(spu_overlay_update_osect): Likewise.
(spu_dis_asm_print_address): New function.
(gdb_print_insn_spu): Likewise.
(spu_gdbarch_init): Store SPU ID in tdep structure.
Install spu_address_to_pointer and gdb_print_insn_spu.
* ppc-linux-tdep.c: Include "observer.h", "auxv.h", "elf/common.h"
and "solib-spu.h".
(ppc_linux_entry_point_addr): New static variable.
(ppc_linux_inferior_created): New function.
(ppc_linux_displaced_step_location): Likewise.
(ppc_linux_init_abi): Enable Cell/B.E. support if supported
by the target.
(_initialize_ppc_linux_tdep): Attach to inferior_created observer.
* NEWS: Mention multi-architecture and Cell/B.E. debugging
capabilities.
testsuite/ChangeLog:
* gdb.xml/tdesc-regs.exp: Skip for SPU targets.
* features/gdb-target.dtd (target): Accept an optional 'osabi'
element.
(osabi): Define element.
* features/mips-linux.xml (target): Add an osabi subelement set to
GNU/Linux.
* regformats/regdat.sh (xmlarch, xmlosabi): New variables. Don't
write the architecture into $xmltarget. Store it in $xmlarch.
Handle the 'osabi' type. Handle outputting the osabi element of
the target description.
* regformats/reg-x86-64-linux.dat (osabi): Set to GNU/Linux.
* regformats/reg-i386-linux.dat (osabi): Set to GNU/Linux.
* target-descriptions.h (tdesc_osabi, set_tdesc_osabi): Declare.
* target-descriptions.c (struct target_desc) <osabi>: New field.
(tdesc_osabi): New function.
(set_tdesc_osabi): New function.
* xml-tdesc.c: Include osabi.h.
(tdesc_end_osabi): New.
(target_children): Parse "osabi" elements.
* arch-utils.c (gdbarch_info_fill): Try to get the osabi from the
target description if the user didn't override it or it is not
extractable from the bfd. If that still fails, fallback to the
configured in default.
* osabi.h (osabi_from_tdesc_string): Declare.
* osabi.c (osabi_from_tdesc_string): New.
(gdbarch_lookup_osabi): Return GDB_OSABI_UNKNOWN instead of
GDB_OSABI_DEFAULT.
* NEWS: Mention that target descriptions can now describe the
target OS ABI.
2009-07-20 Pedro Alves <pedro@codesourcery.com>
* gdb.texinfo (Target Description Format): Mention the new <osabi>
optional element.
(subsection OS ABI): New subsection.
* cli/cli-cmds.c (disassemble_command): Add a new modifier /r
to "disassemble" command to print the raw instructions in hex as
well as in symbolic form.
(init_cli_cmds): Ditto.
(print_disassembly): Change "mixed" to "flags" to translate
the behavior of disassemble.
(disassemble_current_function): Ditto.
* mi/mi-cmd-disas.c (mi_cmd_disassemble): Ditto.
* stack.c (gdb_disassembly_stub): Ditto.
* disasm.c (do_mixed_source_and_assembly): Ditto.
(do_mixed_source_and_assembly): Ditto.
(do_assembly_only): Ditto.
(gdb_disassembly): Ditto.
(dump_insns): print the raw instructions in hex as well as in
symbolic form if DISASSEMBLY_RAW_INSN and flags is true.
* disasm.h (DISASSEMBLY_SOURCE): Include source code with the
assembly if it and flags is true.
(DISASSEMBLY_RAW_INSN): Include the raw instructions in hex with
the assembly if it and flags is true.
(gdb_disassembly): Update extern.
* NEWS: Document disassemble/r support.
2009-07-02 Pedro Alves <pedro@codesourcery.com>
* linux-nat.c (linux_child_follow_fork): If we're staying attached
to the child process, enable event reporting on it. Don't handle
checkpoints here. Instead, add the child fork to the lwp thread
and inferior lists without clobbering the previous inferior. Let
the thread_db layer learn about a new child process, even if
following the parent.
(linux_nat_switch_fork): Delete lwps of the current inferior only,
instead of clearing the whole list. Use thread_change_ptid to
give the core the illusion the new checkpoint is still the same
inferior. Clear the register cache.
(linux_handle_extended_wait): Handle checkpoints here.
(linux_multi_process): Turn on.
* linux-fork.c (struct fork_info) <pc>: Remove field.
(init_fork_list): Do not delete the checkpoint from the inferior
list (it is not there).
(fork_load_infrun_state): Don't switch inferior_ptid here. Pass
the new checkpoint's ptid to linux_nat_switch_fork.
(fork_save_infrun_state): Make static. Don't stop the pc field of
fork_info, it's gone.
(linux_fork_mourn_inferior): Don't delete the checkpoint from the
inferior list, it's not there.
(linux_fork_detach): Ditto.
(delete_fork_command): Replace mention of fork/checkpoint by
checkpoint only.
(detach_fork_command): Likewise. Don't delete the checkpoint from
the inferior list.
(info_forks_command): Adjust.
(restore_detach_fork): Delete.
(checkpointing_pid): New.
(linux_fork_checkpointing_p): New.
(save_detach_fork): Delete.
(checkpoint_command): Delete temp_detach_fork. Don't remove
breakpoints, that's a nop. Store the pid of the process we're
checkpointing, and use make_cleanup_restore_integer to restore it.
Don't reinsert breakpoints here.
(process_command, fork_command): Delete.
(restart_command): Update comments to only mention checkpoints,
not forks.
(_initialize_linux_fork): Delete "fork", "process", "info forks"
commands.
* linux-fork.h (fork_save_infrun_state, fork_list): Delete
declarations.
(linux_fork_checkpointing_p): Declare.
* cli/cli-cmds.c (killlist): New.
* cli/cli-cmds.h (killlist): Declare.
* gdbcmd.h (killlist): Declare.
* inferior.c: Include "gdbthread.h".
(detach_inferior_command, kill_inferior_command)
(inferior_command): New.
(info_inferiors_command): Allow specifying a specific inferior id.
(_initialize_inferiors): Register "inferior", "kill inferior" and
"detach inferior" commands.
* infcmd.c (_initialize_infcmd): Make "kill" a prefix command.
* gdbthread.h (any_thread_of_process): Declare.
* thread.c (any_thread_of_process): New.
* NEWS: Mention multi-inferior debugging. Mention 'info
inferiors', 'inferior', 'detach inferior' and 'kill inferior' as
new commands.
(Removed commands): New section, mentioning that 'info forks',
'fork', 'process', 'delete fork' and 'detach fork' are now gone.
gdb/testsuite/
2009-07-02 Pedro Alves <pedro@codesourcery.com>
* gdb.base/multi-forks.exp: Only run detach-on-fork tests on
linux. Adjust to use "inferior", "info inferiors", "detach
inferior" and "kill inferior" instead of "restart", "info fork",
"detach fork" and "delete fork".
* gdb.base/ending-run.exp: Spell out "info".
* gdb.base/help.exp: Adjust to use test_prefix_command_help for
the "kill" command.
gdb/doc/
2009-07-02 Pedro Alves <pedro@codesourcery.com>
* gdb.texinfo (Debugging multiple inferiors): Document the
"inferior", "detach inferior" and "kill inferior" commands.
(Debugging Programs with Multiple Processes): Adjust to mention
generic "inferior" commands. Delete mention of "detach fork" and
"delete fork". Cross reference to "Debugging multiple inferiors"
section.
* NEWS: Document inlined function support.
* Makefile.in (SFILES): Add inline-frame.c.
(COMMON_OBS): Add inline-frame.o.
* block.c (contained_in): Rewrite to use lexical nesting.
(block_linkage_function): Skip inlined function blocks.
(block_inlined_p): New.
* block.h (struct block): Update comment.
(block_inlined_p): New prototype.
* blockframe.c (get_frame_block): Handle inlined functions.
(get_frame_function): Do not use block_linkage_function.
(block_innermost_frame): Use get_frame_block and contained_in.
* breakpoint.c (watchpoint_check): Remove extra reinit_frame_cache.
Skip over inlined functions. Simplify epilogue check.
(bpstat_check_breakpoint_conditions): Use get_stack_frame_id.
Update comments.
(set_momentary_breakpoint): Only accept non-inlined frames.
(watch_command_1): Use frame_unwind_caller_pc and
frame_unwind_caller_id instead of get_prev_frame.
(until_break_command): Likewise. Use get_stack_frame_id.
* buildsym.c (end_symtab): Set SYMBOL_SYMTAB for block functions.
* dwarf2loc.c (dwarf_expr_frame_base): Use block_linkage_function.
* dwarf2read.c (process_die): Handle DW_TAG_inlined_subroutine.
(read_func_scope, new_symbol): Likewise. Handle arguments specially
for inlined functions without call site information.
(inherit_abstract_dies): Allow tag mismatch for inlined subroutines.
(die_specification): Treat DW_AT_abstract_origin as a specification.
(read_type_die): Handle DW_TAG_inlined_subroutine.
* frame-unwind.c (frame_unwind_init): Add inline_frame_unwind.
* frame.c (fprint_frame_id): Print inline depth.
(fprint_frame_type): Handle INLINE_FRAME and SENTINEL_FRAME.
(skip_inlined_frames, get_stack_frame_id): New.
(frame_unwind_caller_id): Use skip_inlined_frames.
(frame_id_inlined_p): New.
(frame_id_eq): Make the logic match the comments. Add inline_depth
check.
(frame_id_inner): Handle inlined functions.
(frame_unwind_pc): New function, copied from frame_unwind_caller_pc.
(frame_unwind_caller_pc): Use skip_inlined_frames and frame_unwind_pc.
(get_prev_frame_1): Check for inline frames. Split out frame
allocation to get_prev_frame_raw.
(get_prev_frame_raw): New function.
(get_prev_frame): Handle inline frames.
(get_frame_pc): Use frame_unwind_pc.
(get_frame_address_in_block): Skip inlined frames on both sides.
(pc_notcurrent): Delete.
(find_frame_sal): Rewrite to handle inline call sites. Use
get_frame_address_in_block.
(deprecated_update_frame_pc_hack): Make static.
* frame.h: Update comments.
(struct frame_id): Add inline_depth.
(enum frame_type): Add INLINE_FRAME.
(frame_id_inlined_p, get_stack_frame_id): New prototypes.
* gdbthread.h (struct thread_info): Add step_stack_frame_id field.
* infcmd.c (set_step_frame): New function.
(step_once): Use set_step_frame. Handle inlined functions.
(until_next_command): Use set_step_frame.
(finish_backward), finish_forward): Use get_stack_frame_id.
(finish_command): Support inlined functions.
* inferior.h (set_step_info): New prototype.
* infrun.c (RESUME_ALL): Use minus_one_ptid.
(clear_proceed_status): Clear step_stack_frame_id.
(init_wait_for_inferior): Call clear_inline_frame_state.
(init_execution_control_state): Make static.
(set_step_info): New function.
(init_thread_stepping_state): Do not set the symtab or line here.
(stepped_in_from): New function.
(handle_inferior_event): Handle inlined functions. Use set_step_info.
(insert_step_resume_breakpoint_at_frame): Use get_stack_frame_id.
(struct inferior_status): Add step_stack_frame_id.
(save_inferior_status, restore_inferior_status): Save and restore
step_stack_frame_id.
* inline-frame.c, inline-frame.h: New files.
* minsyms.c (prim_record_minimal_symbol_and_info): Use XCALLOC.
* regcache.c (regcache_write_pc): Call reinit_frame_cache.
* s390-tdep.c (s390_prologue_frame_unwind_cache): Handle INLINE_FRAME.
* stack.c (frame_show_address): New.
(print_frame_info, print_frame): Use it.
(find_frame_funname): Use get_frame_function. Handle inlined blocks.
(frame_info): Mark inlined functions.
(backtrace_command_1): Use get_current_user_frame.
(print_frame_local_vars, print_frame_label_vars): Update comments.
(return_command): Refuse inlined functions.
* symtab.c (lookup_symbol_aux_local): Stop at inlined function
boundaries.
(find_function_start_sal): Avoid inlined functions.
(completion_list_add_fields): New function.
(default_make_symbol_completion_list): Use it. Use block_static_block
and block_global_block. Check for inlined functions.
(skip_prologue_using_sal): Avoid line number comparison across
inlining.
* symtab.h (struct symbol): Add is_inlined.
(SYMBOL_INLINED): New.
* target.c (target_resume): Call clear_inline_frame_state.
* valops.c (value_of_variable): Check block_inlined_p.
gdb/doc/
* gdb.texinfo (Debugging Optimized Code): New chapter.
(Compiling for Debugging): Reference it. Move some
text to the new section.
gdb/testsuite/
* gdb.base/break.exp: Add an XFAIL for gcc/36748.
* gdb.cp/annota2.exp: Accept frames-invalid in more places.
* gdb.opt/Makefile.in (EXECUTABLES): Update.
* gdb.opt/clobbered-registers-O2.exp: Update to GPL v3.
* gdb.opt/inline-bt.c, gdb.opt/inline-bt.exp,
gdb.opt/inline-cmds.c, gdb.opt/inline-cmds.exp,
gdb.opt/inline-locals.c, gdb.opt/inline-locals.exp,
gdb.opt/inline-markers.c: New files.
* lib/gdb.exp (skip_inline_frame_tests): New function.
(skip_inline_var_tests): New function.
* infrun.c (sched_multi): New global.
(resume): If sched_multi is set, resume only threads of the
current inferior.
(prepare_to_proceed): Don't switch over to wait_ptid if we're
resuming a different inferior, and sched_multi is off.
(show_schedule_multiple): New.
(_initialize_infrun): Register new "set schedule-multiple" command.
* inferior.h (sched_multi): Declare.
* NEWS: Mention new "schedule-multiple" setting.
gdb/doc/
* gdb.texinfo (All-Stop): Document new 'set schedule-multiple'
command.
2009-05-18 Jon Beniston <jon@beniston.com>
* MAINTAINERS: Add lm32 target.
* Makefile.in: Add lm32 dependencies.
* NEWS: Indicate lm32 is a new target.
* configure.tgt: Add lm32 targets.
* lm32-tdep.c: New file.
gdb/testsuite
2009-05-18 Jon Beniston <jon@beniston.com>
* gdb.asm/asm-source.exp: Add lm32 target.
include/gdb/
2009-05-18 Jon Beniston <jon@beniston.com>
* sim-lm32.h: New file.
sim/
2009-05-18 Jon Beniston <jon@beniston.com>
* MAINTAINERS: Add Jon Beniston as maintainer of lm32 sim.
* configure.ac: Add lm32 target.
* lm32: New directory.
sim/common
2009-05-18 Jon Beniston <jon@beniston.com>
* gennltvals.sh: Add lm32 target.
* nltvals.def: Add lm32 syscall definitions.
sim/lm32/
2009-05-18 Jon Beniston <jon@beniston.com>
* Makefile.in: New file.
* arch.c: New file.
* arch.h: New file.
* config.in: New file.
* configure: New file.
* configure.ac: New file.
* cpu.c: New file.
* cpu.h: New file.
* cpuall.h: New file.
* decode.c: New file.
* decode.h: New file.
* dv-lm32cpu.c: New file.
* dv-lm32timer.c: New file.
* dv-lm32uart.c: New file.
* lm32.c: New file.
* lm32-sim.h: New file.
* mloop.in: New file.
* model.c: New file.
* sem.c: New file.
* sem-switch.c: New file.
* sim-if.c: New file.
* sim-main.c: New file.
* tconfig.in: New file.
* traps.c: New file.
* user.c: New file.
* NEWS: Mention set/show libthread-db-search-path.
* gdb_thread_db.h (LIBTHREAD_DB_SEARCH_PATH): New define.
(LIBTHREAD_DB_SO): Moved from linux-thread-db.c
* linux-thread-db.c (libthread_db_search_path): New setting.
(thread_db_handle): New variable (replaces using_thread_db).
(try_thread_db_load_1): New function.
(try_thread_db_load, thread_db_load_search): Likewise.
(dladdr_to_soname): Likewise.
(thread_db_load): Iterate over possibly multiple libthread_db's.
(check_for_thread_db): Attempt to load new libthread_db.
(thread_db_detach, thread_db_wait): Unload libthread_db.
(thread_db_mourn_inferior): Likewise.
(_initialize_thread_db): Add new libthread-db-search-path option.
Defer loading of libthread_db to check_for_thread_db.
* solib.c (libpthread_name_p): New function.
(libpthread_solib_p): Call it.
* solib.h (libpthread_name_p): New prototype.
gdb/
* ser-tcp.c: Adjust includes.
(tcp_set_cmdlist, tcp_show_cmdlist): Declare.
(tcp_auto_retry, tcp_retry_limit): Declare.
(TIMEOUT): Remove, in favor of tcp_retry_limit.
(POLL_INTERVAL): Increase to 5, in favor of backoff logic.
(wait_for_connect): New function.
(net_open): Use it. Add auto-retry logic.
(set_tcp_cmd, show_tcp_cmd): New functions.
(_initialize_ser_tcp): Initialize new "set/show tcp auto-retry"
and "set/show tcp connect-timeout" commands.
* NEWS: Document new commands.
gdb/doc/
* gdb.texinfo (Remote Configuration): Document new
"set/show tcp auto-retry" and "set/show tcp connect-timeout"
commands.
2008-11-27 Tristan Gingold <gingold@adacore.com>
* NEWS: Add entry for new native configuration: Darwin.
* configure.host: Add Darwin host.
* configure.tgt: Add Darwin target.
* defs.h (enum gdb_osabi): Add GDB_OSABI_DARWIN.
* osabi.c (gdb_osabi_names): Add name for Darwin abi.
* i386-darwin-nat.c: New file.
* i386-darwin-tdep.c: New file.
* machoread.c: New file.
* darwin-nat-info.c: New file.
* darwin-nat.c: New file.
* darwin-nat.h: New file.
* darwin.defs: New file.
* config/i386/darwin.mh: New file.
gdb/doc:
2008-11-27 Tristan Gingold <gingold@adacore.com>
* gdb.texinfo (Darwin): Document Darwin specific features.
2008-08-12 Sandra Loosemore <sandra@codesourcery.com>
* gdb.texinfo (Remote Configuration): Document set remote noack-packet.
(Remote Protocol): Add Packet Acknowledgment to menu.
(Overview): Mention +/- can be disabled, and point to new section
where this is discussed in detail.
(General Query Packets): Document QStartNoAckMode packet, and
corresponding qSupported reply.
(Packet Acknowledgment): New section.
gdb/
2008-08-12 Pedro Alves <pedro@codesourcery.com>
Add no-ack mode to the remote protocol --- optionally stop ACKing
packets and responses when we have a reliable communication
medium.
Based on Apple's GDB, by Jason Molenda <jmolenda@apple.com>
* remote.c (struct remote_state): Add noack_mode field.
(PACKET_QStartNoAckMode): New.
(remote_start_remote): Don't any outstanding packet here.
(remote_open_1): Clear noack_mode. Ack any outstanding packet
here. Activate noack mode if requested.
(remote_protocol_features): Add QStartNoAckMode.
(remote_open_1):
(putpkt_binary): Don't send ack in noack mode.
(read_frame): Don't recompute the checksum in noack mode.
(getpkt_sane): Skip sending ack if in noack mode.
(_initialize_remote): Add set/show remote noack mode.
* NEWS: Note the new features.
gdb/gdbserver/
2008-08-12 Pedro Alves <pedro@codesourcery.com>
* remote-utils.c (noack_mode, transport_is_reliable): New globals.
(remote_open): Set or clear transport_is_reliable.
(putpkt_binary): Don't expect acks in noack mode.
(getpkt): Don't send ack/nac in noack mode.
* server.c (handle_general_set): Handle QStartNoAckMode.
(handle_query): If connected by tcp pass QStartNoAckMode+ in
qSupported.
(main): Reset noack_mode on every connection.
* server.h (noack_mode): Declare.
(arm_force_mode_string, arm_show_fallback_mode)
(arm_show_force_mode): New.
(arm_pc_is_thumb): Honor fallback-mode and force-mode. Use
arm_frame_is_thumb.
(_initialize_arm_tdep): Add "set arm fallback-mode"
and "set arm force-mode".
* NEWS: Document new commands.
* gdb.texinfo (ARM): Document set/show arm fallback-mode
and set/show arm force-mode.
Pedro Alves <pedro@codesourcery.com>
Based on work by Jan Kratochvil <jan.kratochvil@redhat.com> and Jeff
Johnston <jjohnstn@redhat.com>.
* NEWS: Mention attach to stopped process fix.
* infcmd.c (detach_command, disconnect_command): Discard the thread
list.
* infrun.c (handle_inferior_event): Do not ignore non-SIGSTOP while
attaching. Use signal_stop_state.
(signal_stop_state): Check stop_soon.
* linux-nat.c (kill_lwp): Declare earlier.
(pid_is_stopped, linux_nat_post_attach_wait): New.
(lin_lwp_attach_lwp): Use linux_nat_post_attach_wait. Update
comments.
(linux_nat_attach): Use linux_nat_post_attach_wait.
(detach_callback, linux_nat_detach): Improve handling for signalled
processes.
(linux_nat_pid_to_str): Always print out the LWP ID if it differs
from the process ID.
* Makefile.in (infcmd.o): Update.
2008-05-01 Jan Kratochvil <jan.kratochvil@redhat.com>
Daniel Jacobowitz <dan@codesourcery.com>
* gdb.threads/attach-into-signal.c, gdb.threads/attach-into-signal.exp,
gdb.threads/attach-stopped.c, gdb.threads/attach-stopped.exp,
gdb.threads/attachstop-mt.c, gdb.threads/attachstop-mt.exp: New.
of "library". Add "section" element and describe its attributes.
* solib-target.c (struct lm_info): Add section_bases member.
(library_list_start_segment): Error out if seen a section element.
(library_list_start_section): New.
(library_list_end_library): New.
(solib_target_free_library_list): Free section_bases.
(section_attributes): New.
(library_children): Make "segment" optional. Add "section" child.
(library_list_children): Register library_list_end_library.
(solib_target_relocate_section_addresses): Handle section bases.
* NEWS: Mention new qXfer:libraries:read section offsets support.
doc/
* gdb.texinfo (Library List Format): Update to mention the
possibility to pass section addresses instead of segment
addresses.
* NEWS: Document "set exec-wrapper" and the gdbserver --wrapper
argument. Gather all gdbserver features together.
* fork-child.c (exec_wrapper): New variable.
(fork_inferior): Use it.
(startup_inferior): Skip an extra trap if using "set exec-wrapper".
(unset_exec_wrapper_command, _initialize_fork_child): New.
* gdb.texinfo (Starting): Document "set exec-wrapper".
(Server): Document gdbserver --wrapper.
* server.c (wrapper_argv): New.
(start_inferior): Handle wrapper_argv. If set, expect an extra
trap.
(gdbserver_usage): Document --wrapper.
(main): Parse --wrapper.
(update_watchpoint): Set and clear val_valid. Use
fetch_watchpoint_value. Handle unreadable values on the
value chain. Correct check for user-requested array watchpoints.
(breakpoint_init_inferior): Clear val_valid.
(watchpoint_value_print): New function.
(print_it_typical): Use it. Do not free or clear old_val. Print
watchpoints even if old_val == NULL.
(watchpoint_check): Use fetch_watchpoint_value. Check for values
becoming readable or unreadable.
(watch_command_1): Use fetch_watchpoint_value. Set val_valid.
(do_enable_watchpoint): Likewise.
* breakpoint.h (struct breakpoint): Update comment for val. Add
val_valid.
* NEWS: Mention watchpoints on inaccessible memory.
* gdb.base/watchpoint.c (global_ptr, func4): New.
(main): Call func4.
* gdb.base/watchpoint.exp: Call test_inaccessible_watchpoint.
(test_inaccessible_watchpoint): New.
* gdb.texinfo (Set Watchpoints): Mention watchpoints on
unreadable memory. Delete obsolete SPARClite reference.
* NEWS (New native configurations): Xtensa GNU/Linux.
(New targets): Xtensa GNU/Linux.
* Makefile.in (ALL_TARGET_OBS): Add xtensa-linux-nat.o and
xtensa-linux-tdep.o
(ALLDEPFILES): Add xtensa-linux-tdep.c and xtensa-linux-nat.c
(xtensa-linux-nat.o, xtensa-linux-tdep.o): New dependencies.
* configure.tgt (xtensa*-*-linux*): New entry.
* xtensa-config.c (xtensa_tdep): New variable.
(xtensa_config_byte_order, xtensa_config_tdep): Removed.
(rmap): Change format based on new macro XTREG.
(XTENSA_CONFIG_INSTANTIATE): Use new macro defined in xtensa-tdep.h.
* xtensa-linux-nat.c: New.
* xtensa-linux-tdep.c: New.
* xtensa-xtregs.c: New.
* xtensa-tdep.h (xtensa_elf_gregset_t): Update.
(XTENSA_ELF_NGREG, XTREG, XTREG_END, XTENSA_GDBARCH_TDEP_INSTANTIATE)
(XCHAL_NUM_CONTEXTS, XCHAL_HAVE_EXCEPTIONS): New macros.
(xtensa_register_t): New field coprocessor.
(XTENSA_REGISTER_FLAGS_PRIVILEGED): Name spelling corrected.
* xtensa-tdep.c (xtensa_config_tdep, xtensa_config_byte_order): Removed.
(xtensa_pseudo_register_read, xtensa_pseudo_register_write):
Update to handle privileged registers.
(xtensa_supply_gregset) Remove exccause and excvaddr registers.
(xtensa_push_dummy_call): Set windowstart register correctly.
(call0_analyze_prologue): Initialize xtensa_default_isa.
(xtensa_derive_tdep): New.
(xtensa_gdbarch_init): Get rid of xtensa_config_byte_order and
xtensa_config_tdep, use XCHAL_HAVE_BE and xtensa_tdep instead.
Call xtensa_derive_tdep().
* config/xtensa/linux.mh: New.
* regformats/reg-xtensa.dat: New.
(linux_kill, linux_detach): Clean up the process list.
* remote-utils.c (remote_open): Improve port number parsing.
(putpkt_binary, input_interrupt): Only send interrupts if the target
is running.
* server.c (extended_protocol): Make static.
(attached): Define earlier.
(exit_requested, response_needed, program_argv): New variables.
(target_running): New.
(start_inferior): Clear attached here.
(attach_inferior): Set attached here.
(require_running): Define.
(handle_query): Use require_running and target_running. Implement
"monitor exit".
(handle_v_attach, handle_v_run): New.
(handle_v_requests): Use require_running. Handle vAttach and vRun.
(gdbserver_usage): Update.
(main): Redo argument parsing. Handle --debug and --multi. Handle
--attach along with other options or after the port. Save
program_argv. Support no initial program. Resynchronize
communication with GDB after an error. Handle "monitor exit".
Use require_running and target_running. Always allow the extended
protocol. Do not error out for Hc0 or Hc-1. Do not automatically
restart in extended mode.
* README: Refer to the GDB manual. Update --attach usage.
* remote.c (struct remote_state): Add cached_wait_status.
(remote_exec_file): New variable.
(PACKET_vAttach, PACKET_vRun): New constants.
(extended_remote_restart): Do not query for status.
(struct start_remote_args): New.
(remote_start_remote): Take it as a second argument. Check
whether the target is running. Issue an error for non-running
non-extended targets. Cache the wait status. Set inferior_ptid
here.
(remote_open_1): Prompt to disconnect non-running targets. Make
sure the target is marked running. Do not set inferior_ptid here.
Update call to remote_start_remote. Do not call remote_check_symbols
if the target is not running.
(remote_detach_1): Rename from remote_detach. Take an EXTENDED
argument. Handle a non-running target.
(remote_detach): Use it.
(extended_remote_detach): New.
(remote_disconnect): Fix typo. Use remoute_mourn_1.
(extended_remote_attach_1, extended_remote_attach)
(extended_async_remote_attach): New.
(remote_vcont_resume): Remove unused variable.
(remote_wait, remote_async_wait): Use any cached wait status.
(putpkt_binary, getpkt): Clear any cached wait status.
(extended_remoute_mourn_1): New.
(extended_remote_mourn): Use it.
(extended_async_remote_mourn, extended_remote_run): New.
(extended_remote_create_inferior_1): New.
(extended_remote_create_inferior): Use it.
(extended_remote_async_create_inferior): Likewise.
(remote_xfer_partial): Skip for non-executing targets.
(init_extended_remote_ops): Set to_detach and to_attach.
(init_extended_async_remote_ops): Likewise. Use
extended_async_remote_mourn.
(_initialize_remote): Register vAttach, vRun, and
set remote exec-file.
* NEWS: Mention vAttach, vRun, and gdbserver extended-remote support.
* gdb.server/ext-attach.c, gdb.server/ext-attach.exp,
gdb.server/ext-run.exp: New files.
* lib/gdbserver-support.exp (gdbserver_download): New.
(gdbserver_start): New. Update gdbserver expected
output.
(gdbserver_spawn): Use them.
(gdbserver_start_extended): New.
* gdb.texinfo (Using the `gdbserver' Program): Add security
warning. Rearrange into subsections and subsubsections. Document
--multi and --debug. Correct --with-sysroot typo. Update --attach
usage. Make load reference clearer. Document monitor exit.
(Remote Configuration): Document set remote exec-file, attach-packet,
and run-packet.
(Packets): Document vAttach and vRun.
* NEWS: Mention exec tracing support.
* inf-ttrace.c (inf_ttrace_wait): Return TARGET_WAITKIND_EXECD for
exec events.
* infcmd.c (kill_if_already_running, detach_command)
(disconnect_command): Replace SOLIB_RESTART with no_shared_libraries.
* infrun.c (MAY_FOLLOW_EXEC, may_follow_exec): Delete.
(follow_exec): Do not check may_follow_exec. Do not mourn and push
targets. Apply the sysroot path to the loaded executable. Use
no_shared_libraries.
* linux-nat.c (linux_child_follow_fork): Print fork following
messages if verbose.
(kill_wait_callback): Kill again before waiting a second time.
* symfile.c (symbol_file_clear): Replace SOLIB_RESTART with
no_shared_libraries.
* gdb.base/foll-exec.exp: Update header. Skip on remote targets.
Run on GNU/Linux.
(do_exec_tests): Check for systems which do not support catchpoints.
Do not match START.
* gdb.base/foll-fork.exp: Update header. Skip on remote targets.
Run on GNU/Linux. Enable verbose output.
(check_fork_catchpoints): New.
(explicit_fork_child_follow, catch_fork_child_follow)
(tcatch_fork_parent_follow): Update expected messages.
(do_fork_tests): Use check_fork_catchpoints.
* gdb.base/foll-vfork.exp: Update header. Skip on remote targets.
Run on GNU/Linux. Enable verbose output.
(check_vfork_catchpoints): New.
(vfork_parent_follow_to_bp, tcatch_vfork_then_child_follow): Update
expected messages.
(do_vfork_and_exec_tests): Use check_fork_catchpoints.
* hppabsd-tdep.c (hppabsd_supply_gregset): Move to ...
(hppabsd_gregset): Move to ...
(hppabsd_regset_from_core_section): Rename
hppaobsd_regset_from_core_section and move to ...
(hppabsd_find_global_pointer): Update comment.
(hppabsd_init_abi): Make global. Do not register
hppabsd_regset_from_core_section.
(hppabsd_core_osabi_sniffer): Rename hppaobsd_core_osabi_sniffer and
move to ...
(_initialize_hppabsd_tdep): Move to ...
* hppaobsd-tdep.c: ... here. New file.
* hppnbsd-tdep.c: New file.
* hppnbsd-nat.c: New file.
* Makefile.in (ALL_TARGET_OBS): Add hppanbsd-tdep.o and hppaobsd-tdep.o.
(ALLDEPFILES): Add hppabsd-nat.c and hppabsd-tdep.c.
(hppabsd-nat.o, hppabsd-tdep.o): New dependencies.
(hppabsd-tdep.o, hppaobsd-tdep.o): Update dependencies.
* configure.host (hppa*-*-netbsd*): New entry.
* configure.tgt (hppa*-*-netbsd*): New entry.
(hppa*-*-openbsd*): Update.
* NEWS (New native configuration): Mention NetBSD/hppa.
(New targets): Mention NetBSD/hppa.
* NEWS: Mention --pid and --core command line behaviour changes.
gdb/doc/
* gdb.texinfo (File Options): Remove mention of the attempt to
open a core file with the -p option. Don't list -c as a valid
option to attach to a process.
support for breakpoints at multiple locations.
* gdb.texinfo (Setting Breakpoints): Revise
documentation for pending breakpoints. Document
breakpoints with multiple locations.
* c-valprint.c (textual_element_type): New.
(c_val_print): Use it. Do not skip address printing for pointers
with a string format.
(c_value_print): Doc update.
* dwarf2read.c (read_array_type): Use make_vector_type.
* gdbtypes.c (make_vector_type): New.
(init_vector_type): Use it.
(gdbtypes_post_init): Initialize builtin_true_unsigned_char.
(_initialize_gdbtypes): Mark int8_t and uint8_t as TYPE_FLAG_NOTTEXT.
* gdbtypes.h (struct builtin_type): Add builtin_true_unsigned_char.
(TYPE_FLAG_NOTTEXT, TYPE_NOTTEXT): New.
(make_vector_type): New.
* printcmd.c (print_formatted): Only handle 's' and 'i' for examine.
Call the language print routine for string format.
(print_scalar_formatted): Call val_print for string format. Handle
unsigned original types for char format.
(validate_format): Do not reject string format.
* stabsread.c (read_type): Use make_vector_type.
* xml-tdesc.c (tdesc_start_vector): Use init_vector_type.
* gdb.texinfo (Output Formats): Update 'c' description. Describe 's'.
(Examining Memory): Update mentions of the 's' format.
(Automatic Display): Likewise.
* gdb.arch/i386-sse.exp: Do not expect character constants.
* gdb.base/charsign.c, gdb.base/charsign.exp: Delete.
* gdb.base/display.exp: Allow print/s.
* gdb.base/printcmds.exp, gdb.base/setvar.exp: Revert signed
and unsigned char array changes.
* disasm.c (gdb_print_insn): Return the number of branch delay
slot instructions too.
* disasm.h (gdb_print_insn): Update prototype.
* printcmd.c (branch_delay_insns): New variable to record the
number of delay slot instructions after disassembling a branch.
(print_formatted): Record the number of branch delay slot
instructions.
(do_examine): When disassembling, if the last instruction
disassembled has any branch delay slots, then bump the count so
that they get disassembled too.
* tui/tui-disasm.c (tui_disassemble): Update the call to
gdb_print_insn().
* NEWS: Document the new behaviour.
gdb/doc/:
* gdb.texinfo (Examining Memory): Document the new behaviour.
gdb/gdbtk/:
* generic/gdbtk-cmds.c (gdbtk_load_asm): Update the call to
gdb_print_insn().
* solib.c (solib_absolute_prefix): Delete. Replace
all uses with gdb_sysroot.
(_initialize_solib): Add "set sysroot" and "show sysroot".
Make "solib-absolute-prefix" an alias to it.
* gdb.texinfo (Commands to specify files): Describe
"set sysroot" and "show sysroot".
(Using the `gdbserver' program): Lowercase argument
to @var. Expand description of setting up GDB on the
host.
* Makefile.in (gnu-v3-abi.o): Delete special rule.
(eval.o, gnu-v3-abi.o, ia64-tdep.o): Update.
* ada-valprint.c (ada_print_scalar): Update for new type codes.
* c-typeprint.c (c_print_type): Update for new type codes.
(c_type_print_varspec_prefix, c_type_print_varspec_suffix)
(c_type_print_base): Likewise.
(c_type_print_args): Rewrite.
* c-valprint.c (c_val_print): Update for new type codes. Remove
support for references to members. Treat methods like functions.
* cp-abi.c (cplus_print_method_ptr, cplus_method_ptr_size)
(cplus_make_method_ptr, cplus_method_ptr_to_value): New.
* cp-abi.h (cplus_print_method_ptr, cplus_method_ptr_size)
(cplus_make_method_ptr, cplus_method_ptr_to_value): New prototypes.
(struct cp_abi_ops): Add corresponding members.
* cp-valprint.c (cp_print_class_method): Delete.
(cp_find_class_member): New function.
(cp_print_class_member): Use it. Simplify support for bogus
member pointers.
* dwarf2read.c (quirk_gcc_member_function_pointer): Use
lookup_methodptr_type.
(read_tag_ptr_to_member_type): Likewise, and lookup_memberptr_type.
* eval.c (evaluate_subexp_standard): Implement EVAL_SKIP for
OP_SCOPE. Update call to value_aggregate_elt. Rewrite member
pointer support.
(evaluate_subexp_for_address): Handle OP_SCOPE explicitly. Handle
references returned by user defined operators.
* f-typeprint.c (f_print_type, f_type_print_varspec_prefix)
(f_type_print_varspec_suffix): Remove support for member pointers.
* gdbtypes.c (lookup_memberptr_type): Renamed from lookup_member_type
and adjusted.
(smash_to_memberptr_type): Likewise, from smash_to_member_type.
(lookup_methodptr_type): New.
(rank_one_type): Adjust for TYPE_CODE_MEMBERPTR.
(recursive_dump_type): Update for new types.
* gdbtypes.h (enum type_code): Replace TYPE_CODE_MEMBER with
TYPE_CODE_MEMBERPTR and TYPE_CODE_METHODPTR.
(lookup_memberptr_type, lookup_methodptr_type)
(smash_to_memberptr_type): New prototypes.
(smash_to_method_type): Formatting fix.
(lookup_member_type, smash_to_member_type): Delete prototypes.
* gnu-v3-abi.c (gnuv3_get_vtable, gnuv3_get_virtual_fn): New.
Do not rely on debug information for the vptr or the method's
enclosing type. Handle function descriptors for IA64.
(gnuv3_virtual_fn_field): Rewrite using the new functions.
(gnuv3_find_method_in, gnuv3_print_method_ptr)
(gnuv3_method_ptr_size, gnuv3_make_method_ptr)
(gnuv3_method_ptr_to_value): New.
(init_gnuv3_ops): Set new members of gnu_v3_abi_ops.
* hpread.c (hpread_type_lookup): Update for new types.
* infcall.c (value_arg_coerce): Likewise.
* m2-typeprint.c (m2_print_type): Remove explicit support
for member pointers.
* m2-valprint.c (m2_val_print): Likewise.
* p-typeprint.c (pascal_type_print_varspec_prefix)
(pascal_type_print_varspec_suffix, pascal_type_print_base): Likewise.
* p-valprint.c (pascal_val_print): Likewise.
(pascal_object_print_class_method, pascal_object_print_class_member):
Delete.
* p-lang.h (pascal_object_print_class_method)
(pascal_object_print_class_member): Delete prototypes.
* stabsread.c (read_type): Update for new types.
* typeprint.c (print_type_scalar): Likewise.
* valops.c (value_struct_elt_for_reference, value_namespace_elt)
(value_maybe_namespace_elt, value_aggregate_elt): Add want_address
argument. Construct a pointer to member if the address of a
function or data member is requested.
(value_cast_pointers): Don't modify the input value.
(value_cast): Adjust pointer to member handling for new types.
Allow null pointer to member constants. Don't modify the input
value.
(value_ind): Remove pointer to member check. Handle function
descriptors for function pointers.
(value_struct_elt, value_find_oload_method_list, check_field):
Remove pointer to member checks.
* value.c (unpack_long): Allow pointers to data members.
(value_from_longest): Allow member pointers.
* value.h (value_aggregate_elt): Add want_address.
* varobj.c (c_variable_editable): Remove check for members.
* gdbarch.sh: Add vtable_function_descriptors and vbit_in_delta.
* ia64-tdep.c (ia64_convert_from_func_ptr_addr): Handle descriptors
in virtual tables.
(ia64_gdbarch_init): Call set_gdbarch_vtable_function_descriptors.
* c-lang.h (cp_print_class_method): Delete prototype.
* arm-tdep.c (arm_gdbarch_init): Call set_gdbarch_vbit_in_delta.
* mips-tdep.c (mips_gdbarch_init): Likewise.
* gdbarch.c, gdbarch.h: Regenerated.
* gdb.cp/classes.exp (test_pointers_to_class_members): Update expected
output. Test the types of members and member pointers.
* gdb.cp/inherit.exp (test_print_mi_member_types): Remove KFAILs for
gdb/2092.
* gdb.cp/member-ptr.exp: Search for a comment instead of a
statement. Enable for GCC. Update expected output for some tests
and add new tests. Remove obsolete GCC KFAILs. Allow GCC's class
layout.
* gdb.cp/member-ptr.cc (Padding, Padding::vspacer, Base, Base::get_x)
(Base::vget_base, Left, Left::vget, Right, Right::vget, Diamond)
(Diamond::vget_base): New.
(main): Add new tests.
* gdb.cp/printmethod.exp: Update expected output for member functions.
* gdb.cp/virtfunc.exp (test_virtual_calls): Add a KFAIL for
print pEe->D::vg().
* remote.c (PACKET_qXfer_auxv): New, renamed from PACKET_qPart_auxv.
(remote_supported_packet): Remove #if 0.
(remote_protocol_features): Add qPart:auxv:read.
(remote_unescape_input): New function.
(readchar): Don't mask off the high bit.
(read_frame): Use fputstrn_filtered for packet data.
(getpkt_sane): Return the number of bytes read or -1. Use
fputstrn_unfiltered.
(remote_read_qxfer): New.
(remote_xfer_partial): Use it for TARGET_OBJECT_AUXV.
(_initialize_remote): Update packet registration.
* defs.h (fputstrn_filtered): New prototype.
* utils.c (fputstrn_filtered): New.
* NEWS: Mention qXfer.
gdb/doc/
* gdb.texinfo (OS Information): Update qPart reference to
qXfer.
(Remote configuration): Likewise.
(Overview): Move @cindex to the start of a paragraph. Talk
about binary data encoding.
(Packets): Refer to the overview for the details of the X
packet encoding.
(General Query Packets): Remove qPart description. Add qXfer
description. Add an anchor to qSupported. Correct feature
table title. Add a new feature for qXfer:auxv:read.
(Interrupts): Add a missing parenthesis.
gdb/gdbserver/
* server.c (decode_xfer_read, write_qxfer_response): New.
(handle_query): Take a packet length argument. Handle
qXfer:auxv:read instead of qPart:auxv:read. Mention it in
the qSupported response.
(main): Update call to handle_query.
that the gdb-6.5 branch has been created.
* NEWS: Create a new section for changes that are included
since gdb-6.5. Name the "since gdb-6.4" section as the "in gdb-6.5"
section.
* 2006-03-22 Jim Blandy <jimb@redhat.com>
Add support for the Renesas M32C and M16C.
* configure.tgt (m32c-*-*): New entry.
* config/m32c/m32c.mt: New file.
* m32c-tdep.c: New file.
* Makefile.in (elf_m32c_h): New variable.
(m32c-tdep.o): New rule.
* NEWS: Mention new target.
* MAINTAINERS: Designate Jim Blandy as responsible maintainer.
* Makefile.in (gdb_select_h, ser_tcp_h): New.
(ALLDEPFILES): Add ser-mingw.c.
(event-loop.o, inflow.o, mingw-hdep.o, posix-hdep.o, ser-base.o)
(ser-tcp.o, ser-unix.o): Update.
(ser-mingw.o): New rule.
* configure: Regenerated.
* configure.ac: Add ser-mingw.o for mingw32.
* ser-mingw.c: New file.
* event-loop.c: Include "gdb_select.h".
(gdb_select): Remove, moved to mingw-hdep.c and posix-hdep.c.
* ser-base.c: Include "gdb_select.h".
(ser_base_wait_for): Use gdb_select.
* serial.c (serial_for_fd): New function.
(serial_fdopen): Try "terminal" before "hardwire". Initialize
the allocated struct serial.
(serial_wait_handle): New function.
* serial.h (serial_for_fd, serial_wait_handle): New prototypes.
(struct serial_ops) [USE_WIN32API]: Add wait_handle.
* gdb_select.h: New file.
* ser-tcp.c: Include "ser-tcp.h". Remove unused "ser-unix.h" include.
(net_close, net_read_prim, net_write_prim): Make global.
(net_open): Likewise. Pass an exception set to select. Whitespace fix.
Document why we can not use gdb_select.
(_initialize_ser_tcp) [USE_WIN32API]: Do not register TCP support here.
* ser-tcp.h: New file.
* inflow.c (gdb_has_a_terminal): Don't initialize stdin_serial here.
(handle_sigio): Use gdb_select.
(initialize_stdin_serial): New function.
* terminal.h (initialize_stdin_serial): New prototype.
* top.c (gdb_init): Call initialize_stdin_serial.
* mingw-hdep.c (gdb_select): New function, moved from gdb_select in
event-loop.c. Add exception condition support. Use serial_for_fd
and serial_wait_handle. Fix timeout handling.
* posix-hdep.c: Include "gdb_select.h".
(gdb_select): New function.
* remote-st.c (connect_command): Use gdb_select.
* ser-unix.c: Include "gdb_select.h".
(hardwire_send_break, wait_for): Use gdb_select.
Checkpoint/Restart for Linux.
* linux-nat.c: Add support for debugging multiple forks.
Add #include for linux-fork.h (interface spec).
(super_mourn_inferior): New function pointer.
(child_mourn_inferior): New function / target method.
(linux_target): Claim to_mourn_inferior method pointer.
(child_follow_fork): Call interface to linux-fork, conditionally
add new fork processes to list of debugged processes.
(kill_inferior): Use interface to linux-fork to kill
multiple processes.
* linux-fork.h: New file.
* linux-fork.c: New file. Support for debugging multiple forks
of the same program. Support for checkpoint and restart commands.
* infrun.c (nullify_last_target_wait_ptid): New function.
* Makefile.in: Add linux-fork.
* config/*/linux.mh: Add linux-fork.
* NEWS: Mention new functionality.
the following configurations have been removed: h8300*-*-*,
mn10300-*-*, and v850-*-*. These configurations had been
removed within the 6.4 development cycle, but were later
restored within the same cycle.
* MAINTAINERS: Mark the xstormy16, sh64, ns32k, mn10300, mcore,
and h8300 as broken.
* NEWS: END-OF-LIFE frame compatibility module.
* PROBLEMS: For "Stack backtraces", remove powerpc, hppa and mips
specific comments.
* configure.host: Add vax-*-netbsdelf* and vax-*-netbsd*.
* config/vax/nbsdelf.mh: New file.
* config/vax/nbsdaout.mh: New file.
* config/vax/nm-nbsd.h: New file.
* config/vax/nm-nbsdaout.h: New file.
instructions to generate a SIGSEGV in addition to SIGTRAP, SIGILL
and SIGEMT. Update comments.
* NEWS (Revised SPARC target): Mention support for non-executable
stack.
Obsolete old MIPS SVr3 and SVr4 systems.
* NEWS: Mention obsoleted systems.
* configure.tgt: Mark mips*-*-sysv4* as obsolete.
* configure.host: Mark mips-dec-*, mips-little-*, mips-sony-*,
mips-*-sysv4*, mips-*-sysv*, mips-*-riscos* and mips-*-mach3* as
obsolete.
* config/mips/decstation.mh: Mark as obsolete.
* config/mips/littlemips.mh: Mark as obsolete.
* config/mips/nm-mips.h: Mark as obsolete.
* config/mips/xm-mips.h: Mark as obsolete.
* config/mips/news-mips.mh: Mark as obsolete.
* config/mips/nm-news-mips.h: Mark as obsolete.
* config/mips/riscos.mh: Mark as obsolete.
* config/mips/nm-riscos.h: Mark as obsolete.
* config/mips/xm-riscos.h: Mark as obsolete.
* config/mips/mipsv4.mt: Mark as obsolete.
* config/mips/tm-mipsv4.h: Mark as obsolete.
* config/mips/xm-mipsv4.h: Mark as obsolete.
Obsolete old m68k systems.
* configure.host: Mark m68*-sun-*, m68*-sun-sunos4*,
m68*-sun-sunos3*, m68*-motorola-*, m68*-*-sysv4*, m68*-*-lynxos*,
m68*-bull*-sysv*, m68*-att-*, m680[01]0-sun-sunos4*, and
m680[01]0-sun-sunos3* as obsolete.
* configure.tgt: Mark m68*-*-lynxos*, m68*-*-sunos3*,
m68*-*-sunos4*, m68*-*-sysv4*, m68000-*-sunos3*, m68000-*-sunos4*,
m68*-bull-sysv*, m68*-att-*, and m68*-motorola-*, as obsolete.
* config/m68k/sun3os4.mh: Mark file obsolete.
* config/m68k/xm-sun3os4.h: Mark file obsolete.
* config/m68k/sun3os3.mh: Mark file obsolete.
* config/m68k/nm-sun3.h: Mark file obsolete.
* config/m68k/xm-sun3.h: Mark file obsolete.
* config/m68k/sun2os4.mh: Mark file obsolete.
* config/m68k/sun2os3.mh: Mark file obsolete.
* config/m68k/nm-sun2.h: Mark file obsolete.
* config/m68k/xm-sun2.h: Mark file obsolete.
* config/m68k/m68kv4.mh: Mark file obsolete.
* config/m68k/nm-sysv4.h: Mark file obsolete.
* config/m68k/xm-m68kv4.h: Mark file obsolete.
* config/m68k/m68klynx.mh: Mark file obsolete.
* config/m68k/nm-m68klynx.h: Mark file obsolete.
* config/m68k/dpx2.mh: Mark file obsolete.
* config/m68k/xm-dpx2.h: Mark file obsolete.
* config/m68k/nm-dpx2.h: Mark file obsolete.
* config/m68k/delta68.mh: Mark file obsolete.
* config/m68k/xm-delta68.h: Mark file obsolete.
* config/m68k/nm-delta68.h: Mark file obsolete.
* config/m68k/3b1.mh: Mark file obsolete.
* config/m68k/xm-3b1.h: Mark file obsolete.
* config/m68k/sun3os4.mt: Mark file obsolete.
* config/m68k/tm-sun3os4.h: Mark file obsolete.
* config/m68k/sun3os3.mt: Mark file obsolete.
* config/m68k/tm-sun3.h: Mark file obsolete.
* config/m68k/sun2os4.mt: Mark file obsolete.
* config/m68k/tm-sun2os4.h: Mark file obsolete.
* config/m68k/sun2os3.mt: Mark file obsolete.
* config/m68k/tm-sun2.h: Mark file obsolete.
* config/m68k/m68kv4.mt: Mark file obsolete.
* config/m68k/tm-m68kv4.h: Mark file obsolete.
* config/m68k/m68klynx.mt: Mark file obsolete.
* config/m68k/tm-m68klynx.h: Mark file obsolete.
* config/m68k/dpx2.mt: Mark file obsolete.
* config/m68k/tm-dpx2.h: Mark file obsolete.
* config/m68k/delta68.mt: Mark file obsolete.
* config/m68k/tm-delta68.h: Mark file obsolete.
* config/m68k/3b1.mt: Mark file obsolete.
* config/m68k/tm-3b1.h: Mark file obsolete.
* NEWS: Mention the new backtrace mechanism, DWARF 2 CFI, hosted
file I/O, multi-arch, TLS and NPTL, DWARF 2 Location Expressions,
and Java.
* PROBLEMS: Mention that mips*-*-*, powerpc*-*-*, sparc*-*-* and
arm*-*-* do not use the new frame code.
* NEWS: Mention that m32r is multi-arch.
From 2003-07-28 Kei Sakamoto <sakamoto.kei@renesas.com>:
* configure.tgt: Recognize m32r-*-*.
* config/m32r/tm-m32r.h: Delete file.
* config/m32r/m32r.mt: New file.
* m32r-rom.c (m32r_upload_command): Use hostent only when
gethostname succeeds, in order to avoid a compilation
warning.
* m32r-tdep.c (m32r_store_return_value): Add a cast to remove a
compiler warning.
* m68hc11-tdep.c (_initialize_m68hc11_tdep): Deprecate "regs" command.
(m68hc11_print_register): New function to print out one register.
(m68hc11_print_registers_info): New function to print registers.
(show_regs): Deprecate and use the above.
(m68hc11_gdbarch_init): Install the print_registers_info.
* MAINTAINERS: Mark h8500 as obsolete.
* configure.tgt (h8500-*-*): Mark h8500 code as obsolete.
* findvar.c (value_from_register): Ditto.
* h8500-tdep.c: Mark file as obsolete.
* config/h8500/h8500.mt: Ditto.
* config/h8500/tm-h8500.h: Ditto.
* NEWS: Mention that h8500 is obsolete.
* frame.h: Note that namelen can be negative.
* frame.c (frame_map_name_to_regnum): When LEN is negative, use
NAME's length.
* NEWS: Mention that the d10v's `regs' command is deprecated.
* d10v-tdep.c (d10v_gdbarch_init): Set print_registers_info.
(d10v_print_registers_info): New function.
(show_regs): Call d10v_print_registers_info.
(_initialize_d10v_tdep): Mark "show regs" command as deprecated.
Jason Molenda <jmolenda@apple.com>.
* Makefile.in (PROFILE_CFLAGS): Substitute from configure.
(INTERNAL_LDFLAGS): Don't include PROFILE_CFLAGS.
* NEWS: Mention profiling.
* configure.in (--enable-gdbtk): Fix typo.
(--enable-profiling): New. Set PROFILE_CFLAGS.
* maint.c (maintenance_set_profile_cmd): Remove NOTYET.
Fill in function.
(profiling_state): New variable.
(mcleanup_wrapper): New function.
(_initialize_maint): Remove NOTYET, fix call to
add_setshow_boolean_cmd for "maint set profile".
* configure: Regenerated.
* NEWS: add recent mi fixes.
* varobj.c (struct varobj): Add new "updated" flag.
(new_variable): Default "updated" flag to 0.
(varobj_set_value): Set "updated" flag to 1 if value
changes.
(varobj_update): Check varobj "updated" flag before
comparing old and refreshed values. Fix for
PR gdb/702.
* NEWS: Mention that MI syntax, selected by "mi" changed to "mi2"
and that "mi0" syntax has been removed.
2002-10-01 Andrew Cagney <ac131313@redhat.com>
* gdb.texinfo (Mode Options): Update --interpreter option. "mi2"
and "mi1" instead of "mi1" and "mi0".
2002-10-01 Andrew Cagney <ac131313@redhat.com>
* mi-main.c (mi2_command_loop): New function.
(mi0_command_loop): Delete function.
(_initialize_mi_main): Recognize, and default to, "mi2". Do not
recognize "mi0".
* mi-out.c (mi_table_begin): Remove mi0 code.
(mi_table_body, mi_table_end): Ditto.
(mi_table_header, mi_open, mi_close): Ditto.
* configure.tgt: Make arc-*-* obsolete.
* NEWS: Mention that arc-*-* has been identifed as obsolete.
* MAINTAINERS: Make arc-elf obsolete.
* arc-tdep.c: Make file obsolete.
* config/arc/arc.mt: Ditto.
* config/arc/tm-arc.h: Ditto.
Doug Evans
Don Lee
Ulrich Weigand
Daniel Jacobowitz
Pedro Alves
Stan Shebs
Hui Zhu
Jon Beniston
Paul Pluzhnikov
Michael Snyder
David Daney
Eli Zaretskii
Tom Tromey
Thiago Jung Bauermann
Joel Brobecker
Sandra Loosemore
Vladimir Prus
Tristan Gingold
Paul N. Hilfinger
Jan Kratochvil
Pierre Muller
Corinna Vinschen
Craig Silverstein
Maxim Grigoriev
Nick Hudson
Jim Blandy
Maciej W. Rozycki
Bob Wilson
Kevin Buettner
Mark Kettenis
Andrew Stubbs
Gaius Mulley
Mark Mitchell
Nathan Sidwell
Andrew Cagney
Andreas Schwab
Michael Chastain
Randolph Chung
Brian Ford
David Carlton
Ian Lance Taylor
Kazuhiro Inaoka
Stephane Carrez
Jeff Johnston
Nick Clifton