Commit Graph

59669 Commits

Author SHA1 Message Date
Alan Modra d6e14abcef * elf32-ppc.c (allocate_dynrelocs): Always use tlsld_got for
TLS_LD even when symbol is used with other TLS reloc types.
	(ppc_elf_relocate_section): Bypass symbol checks when using tlsld_got.
	Leave addend zero on LD DTPMOD dynamic reloc.
2008-11-20 08:47:10 +00:00
Hans-Peter Nilsson 63cb8e5fe5 Forgot to save entry before commit:
* config/tc-cris.c (cris_number_to_imm): Apply S_SET_THREAD_LOCAL
	on symbols in TLS relocs.
2008-11-20 02:48:28 +00:00
Doug Evans 642fd10146 * inferior.h (proceed_to_finish): Delete, unused.
(stop_registers): Tweak comment.
	* infrun.c (stop_registers): Tweak comment.
2008-11-20 00:35:23 +00:00
Alan Modra 1f7d85c731 daily update 2008-11-20 00:00:05 +00:00
gdbadmin c7a9fda064 *** empty log message *** 2008-11-20 00:00:03 +00:00
Kevin Buettner 9bc7b6c67c * frv-tdep.c (frv_skip_main_prologue): New function.
(frv_gdbarch_init): Register frv_skip_main_prologue.
	* solib-frv.c (fetch_loadmap): Return early when no segments are
	found.
	(frv_relocate_main_executable): Return early when both interpreter
	and executable loadmap addresses are zero.
2008-11-19 21:17:07 +00:00
Bob Wilson d0107bb6ae gdb/
* xtensa-config.c (rmap): Remove entries for ar32 through ar63.  Add
	threadptr, scompare1, mmid, epc5, epc6, epc7, eps5, eps6, eps7,
	excsave5, excsave6, excsave7, cpenable, and vecbase registers.
	(xtensa_submask0, xtensa_submask1, xtensa_submask2)
	(xtensa_submask3, xtensa_submask4, xtensa_submask5, xtensa_submask6)
	(xtensa_submask7, xtensa_submask8, xtensa_submask9, xtensa_submask10)
	(xtensa_submask11, xtensa_submask12, xtensa_submask13, xtensa_submask14)
	(xtensa_submask15): Adjust register numbers.
	* xtensa-xtregs.c (XTENSA_ELF_XTREG_SIZE): Change to 4.
	(xtensa_regmap_table): Add entry for scompare1.
	* regformats/reg-xtensa.dat: Remove ar32 through ar63.  Add threadptr
	and scompare1.
gdb/gdbserver/
	* xtensa-xtregs.c (XTENSA_ELF_XTREG_SIZE): Change to 4.
	(xtensa_regmap_table): Add entry for scompare1.
2008-11-19 18:29:47 +00:00
Bob Wilson 33430bd0ae include/
* xtensa-config.h (XCHAL_HAVE_MUL16, XCHAL_HAVE_MUL32, XCHAL_HAVE_DIV32)
	(XCHAL_HAVE_MINMAX, XCHAL_HAVE_SEXT, XCHAL_HAVE_THREADPTR)
	(XCHAL_HAVE_RELEASE_SYNC, XCHAL_HAVE_S32C1I): Change to 1.
	(XCHAL_NUM_AREGS): Change to 32.
	(XCHAL_ICACHE_SIZE, XCHAL_DCACHE_SIZE): Change to 16K.
	(XCHAL_ICACHE_LINESIZE, XCHAL_DCACHE_LINESIZE): Change to 32.
	(XCHAL_ICACHE_LINEWIDTH, XCHAL_DCACHE_LINEWIDTH): Change to 5.
	(XCHAL_DCACHE_IS_WRITEBACK): Change to 1.
	(XCHAL_DEBUGLEVEL): Change to 6.
bfd/
	* xtensa-modules.c (sysregs): Add MMID, VECBASE, EPC5, EPC6, EPC7,
	EXCSAVE5, EXCSAVE6, EXCSAVE7, EPS5, EPS6, EPS7, CPENABLE,
	SCOMPARE1, and THREADPTR registers.
	(NUM_SYSREGS, MAX_USER_REG): Update.
	(states): Change width of INTERRUPT, WindowBase, WindowStart, and
	INTENABLE.  Add VECBASE, EPC5, EPC6, EPC7, EXCSAVE5, EXCSAVE6,
	EXCSAVE7, EPS6, EPS6, EPS7, THREADPTR, CPENABLE, and SCOMPARE1 states.
	(NUM_STATES): Update.
	(enum xtensa_state_id): Add entries for new states.
	(enum xtensa_field_id): Add entries for xt_wbr15_imm and xt_wbr18_imm
	fields, along with functions to extract and set them.
	(regfiles): Change number of AR registers to 32.
	(Operand_ar0_encode, Operand_ar4_encode, Operand_ar8_encode,
	Operand_ar12_encode, Operand_ars_entry_encode): Update register mask.
	(operands): Add entries for tp7, xt_wbr15_label, xt_wbr18_label,
	xt_wbr15_imm, and xt_wbr18_imm operands, along with functions to
	encode and decode them.
	(enum xtensa_operand_id): Add entries for new operands.
	(Iclass_xt_iclass_rfi_stateArgs): Add EPC5, EPC6, EPC7, EPS5, EPS6, and
	EPC7 states.
	(Iclass_xt_iclass_rfdo_stateArgs): Replace EPC4 and EPS4 by EPC6 and
	EPS6, respectively.
	(iclasses): Add entries for rur_threadptr, wur_threadptr,
	xt_iclass_wsr_176, xt_iclass_rsr_epc5, xt_iclass_wsr_epc5,
	xt_iclass_xsr_epc5, xt_iclass_rsr_excsave5, xt_iclass_wsr_excsave5,
	xt_iclass_xsr_excsave5, xt_iclass_rsr_epc6, xt_iclass_wsr_epc6,
	xt_iclass_xsr_epc6, xt_iclass_rsr_excsave6, xt_iclass_wsr_excsave6,
	xt_iclass_xsr_excsave6, xt_iclass_rsr_epc7, xt_iclass_wsr_epc7,
	xt_iclass_xsr_epc7, xt_iclass_rsr_excsave7, xt_iclass_wsr_excsave7,
	xt_iclass_xsr_excsave7, xt_iclass_rsr_eps5, xt_iclass_wsr_eps5,
	xt_iclass_xsr_eps5, xt_iclass_rsr_eps6, xt_iclass_wsr_eps6,
	xt_iclass_xsr_eps6, xt_iclass_rsr_eps7, xt_iclass_wsr_eps7,
	xt_iclass_xsr_eps7, xt_iclass_rsr_vecbase, xt_iclass_wsr_vecbase,
	xt_iclass_xsr_vecbase, xt_iclass_mul16, xt_iclass_wsr_mmid,
	xt_iclass_icache_lock, xt_iclass_dcache_lock, xt_iclass_rsr_cpenable,
	xt_iclass_wsr_cpenable, xt_iclass_xsr_cpenable, xt_iclass_clamp,
	xt_iclass_minmax, xt_iclass_sx, xt_iclass_l32ai, xt_iclass_s32ri,
	xt_iclass_s32c1i, xt_iclass_rsr_scompare1, xt_iclass_wsr_scompare1,
	xt_iclass_xsr_scompare1, xt_iclass_div, and xt_iclass_mul32, along
	with corresponding argument and state argument arrays.  Change
	number of state arguments for xt_iclass_rfi.  Add arguments for
	xt_iclass_rfdo.
	(enum xtensa_iclass_id): Add entries for new iclasses.
	(opcodes): Add entries for RUR_THREADPTR, WUR_THREADPTR, WSR_176,
	RSR_EPC5, WSR_EPC5, XSR_EPC5, RSR_EXCSAVE5, WSR_EXCSAVE5, XSR_EXCSAVE5,
	RSR_EPC6, WSR_EPC6, XSR_EPC6, RSR_EXCSAVE6, WSR_EXCSAVE6, XSR_EXCSAVE6,
	RSR_EPC7, WSR_EPC7, XSR_EPC7, RSR_EXCSAVE7, WSR_EXCSAVE7, XSR_EXCSAVE7,
	RSR_EPS5, WSR_EPS5, XSR_EPS5, RSR_EPS6, WSR_EPS6, XSR_EPS6, RSR_EPS7,
	WSR_EPS7, XSR_EPS7, RSR_VECBASE, WSR_VECBASE, XSR_VECBASE, MUL16U,
	MUL16S, WSR_MMID, IPFL, IHU, IIU, DPFL, DHU, DIU, RSR_CPENABLE,
	WSR_CPENABLE, XSR_CPENABLE, CLAMPS, MIN, MAX, MINU, MAXU, SEXT, L32AI,
	S32RI, S32C1I, RSR_SCOMPARE1, WSR_SCOMPARE1, XSR_SCOMPARE1, QUOU, QUOS,
	REMU, REMS, and MULL opcodes, along with the corresponding functions
	to encode them.
	(enum xtensa_opcode_id): Add entries for new opcodes.
	(Slot_inst_decode): Handle new opcodes.
	(Slot_inst_get_field_fns, Slot_inst_set_field_fns): Add entries for
	xt_wbr15_imm and xt_wbr18_imm fields.
	(Slot_inst16a_get_field_fns, Slot_inst16a_set_field_fns): Likewise.
	(Slot_inst16b_get_field_fns, Slot_inst16b_set_field_fns): Likewise.
	(xtensa_modules): Update number of fields, operands, iclasses and
	opcodes.
2008-11-19 18:25:20 +00:00
Nick Clifton 793c580792 Change documentation license to FDL v1.3 2008-11-19 16:22:48 +00:00
Pedro Alves 6e5abd65ae * remote.c (escape_buffer): New.
(putpkt_binary, read_frame, getpkt_or_notif_sane_1): Use it.  Make
	sure debug output printing a packet buffer goes through a single
	fprintf_unfiltered call.
	* utils.c (vfprintf_unfiltered): If outputting timestamps, end
	output with a newline if it wasn't going to already.
2008-11-19 14:45:09 +00:00
Nick Clifton c91e322a29 * elf.c (swap_out_syms) [USE_STT_COMMON]: Fix syntax error. 2008-11-19 10:09:21 +00:00
Nick Clifton af1fb11f4b PR 7027
* elfxx-sparc.c (_bfd_sparc_elf_check_relocs): Treat WPLT30 relocs
        against local symbols in 64-bit binaries as if they were WDISP30
        relocs.
        (_bfd_sparc_elf_relocate_section): Likewise.
2008-11-19 09:25:56 +00:00
Hans-Peter Nilsson 4b1824c64a * gas/cris/rd-tls-1.d, gas/cris/rd-tls-1.s: Use a local thread
variable instead of .text location for :GD decoration test.
2008-11-19 06:16:54 +00:00
Hans-Peter Nilsson f329435679 * config/tc-cris.c (cris_number_to_imm): Apply S_SET_THREAD_LOCAL
on symbols in TLS relocs.
2008-11-19 06:16:04 +00:00
Alan Modra 156b28010a daily update 2008-11-19 00:00:09 +00:00
gdbadmin eb0d4782bf *** empty log message *** 2008-11-19 00:00:03 +00:00
Paul Pluzhnikov 15c99a447e 2008-11-18 Paul Pluzhnikov <ppluzhnikov@google.com>
* maint.c (maintenance_translate_address): Fix a buglet.
2008-11-18 22:46:27 +00:00
Thiago Jung Bauermann 2c4ad78125 gdb/
* features/Makefile (rs6000/powerpc-isa205-32l-expedite,
	rs6000/powerpc-isa205-altivec32l-expedite,
	powerpc-isa205-vsx32l-expedite, rs6000/powerpc-isa205-64l-expedite,
	rs6000/powerpc-isa205-altivec64l-expedite,
	powerpc-isa205-vsx64l-expedite): New variables.
	* regformats/rs6000/powerpc-isa205-32l.dat: Generate.
	* regformats/rs6000/powerpc-isa205-altivec32l.dat: Generate.
	* regformats/rs6000/powerpc-isa205-vsx32l.dat: Generate.
	* regformats/rs6000/powerpc-isa205-64l.dat: Generate.
	* regformats/rs6000/powerpc-isa205-altivec64l.dat: Generate.
	* regformats/rs6000/powerpc-isa205-vsx64l.dat: Generate.

gdbserver/
	* Makefile.in (powerpc-isa205-32l.o, powerpc-isa205-32l.c,
	powerpc-isa205-altivec32l.o, powerpc-isa205-altivec32l.c,
	powerpc-isa205-vsx32l.o, powerpc-isa205-vsx32l.c,
	powerpc-isa205-64l.o, powerpc-isa205-64l.c,
	powerpc-isa205-altivec64l.o, powerpc-isa205-altivec64l.c,
	powerpc-isa205-vsx64l.o, powerpc-isa205-vsx64l.c): New targets.
	* configure.srv (powerpc*-*-linux*): Add ISA 2.05 object files and
	XML target descriptions.
	* linux-ppc-low.c (ppc_arch_setup): Init registers with 64-bit FPSCR
	when inferior is running on an ISA 2.05 or later processor.  Add
	special case to return offset for full 64-bit slot of FPSCR when
	in 32-bits.
2008-11-18 21:48:48 +00:00
Thiago Jung Bauermann 69abc51c17 gdb/
* ppc-linux-nat.c (ppc_register_u_addr): Add special case to return
	offset for full 64-bit slot of FPSCR when in 32-bits.
	(ppc_linux_read_description): Return target description with 64-bit
	FPSCR when inferior is running on an ISA 2.05 or later processor.
	* ppc-linux-tdep.c (_initialize_ppc_linux_tdep): Call
	initialize_tdec_powerpc_isa205_32l,
	initialize_tdec_powerpc_isa205_altivec32l,
	initialize_tdec_powerpc_isa205_vsx32l,
	initialize_tdec_powerpc_isa205_64l,
	initialize_tdec_powerpc_isa205_altivec64l and
	initialize_tdec_powerpc_isa205_vsx64l.
	* ppc-linux-tdep.h: Add external declaration for
	tdesc_powerpc_isa205_32l, tdesc_powerpc_isa205_altivec32l,
	tdesc_powerpc_isa205_vsx32l, tdesc_powerpc_isa205_64l,
	tdesc_powerpc_isa205_altivec64l and tdesc_powerpc_isa205_vsx64l.
	* features/rs600/powerpc-fpu-isa205.xml: New file.
	* features/rs600/powerpc-isa205-32l.xml: New file.
	* features/rs600/powerpc-isa205-64l.xml: New file.
	* features/rs600/powerpc-isa205-altivec32l.xml: New file.
	* features/rs600/powerpc-isa205-altivec64l.xml: New file.
	* features/rs600/powerpc-isa205-vsx32l.xml: New file.
	* features/rs600/powerpc-isa205-vsx64l.xml: New file.
	* features/rs600/powerpc-isa205-32l.c: Generate.
	* features/rs600/powerpc-isa205-64l.c: Generate.
	* features/rs600/powerpc-isa205-altivec32l.c: Generate.
	* features/rs600/powerpc-isa205-altivec64l.c: Generate.
	* features/rs600/powerpc-isa205-vsx32l.c: Generate.
	* features/rs600/powerpc-isa205-vsx64l.c: Generate.

gdb/testsuite/
	* gdb.arch/ppc-dfp.exp: New file.
	* gdb.arch/ppc-dfp.c: New file.
2008-11-18 21:39:47 +00:00
Paul Pluzhnikov c14c28ba11 2008-11-18 Paul Pluzhnikov <ppluzhnikov@google.com>
* objfiles.h: New MULTI_OBJFILE_P macro.
	* printcmd.c (sym_info): Print object name.
	* maint.c (maintenance_translate_address): Likewise.
2008-11-18 21:31:27 +00:00
Joel Sherrill 00a0b122cf 2008-11-18 Joel Sherrill <joel.sherrill@oarcorp.com>
* configure: Regenerated.
	* configure.ac: Add test for System V shared memory and semaphore.
	* debug.c, debug.h: Add trace support for new devices.
	* hw_sem.c, hw_shm.c: New files.
	* Makefile.in: Add hw_sem.c and hw_shm.c.
2008-11-18 21:30:37 +00:00
Joel Brobecker 394a666683 * gdb.texinfo (Set Catchpoints): Remove the documentation of
commands "catch load" and "catch unload".
2008-11-18 20:43:12 +00:00
Joel Brobecker d5cbbe6e68 * NEWS: Document the removal of "catch load" and "catch unload". 2008-11-18 20:41:42 +00:00
Catherine Moore 8e79c3df51 Add support for ARM half-precision conversion instructions. 2008-11-18 15:45:05 +00:00
Nick Clifton dc80fd5cfc * dwarf2.c (read_section): Fix formatting.
(read_n_bytes): Remove unhelpful comment.
        (read_indirect_string): Pass symbol table to read_section in case
        the .debug_str section needs relocating.

        PR 7037
        * elf32-cr16.c (cr16_elf_howto_table): Zero the src_mask field of
        the reloc descriptions.
2008-11-18 14:05:00 +00:00
Doug Evans 2e74121d77 * infcall.c (call_function_by_hand): Fix punctuation and capitalization
on error messages.

	* gdb.mi/mi-syn-frame.exp: Update expected output.
	* gdb.mi/mi2-syn-frame.exp: Update expected output.
2008-11-18 00:13:04 +00:00
gdbadmin fc04d60907 *** empty log message *** 2008-11-18 00:00:33 +00:00
Alan Modra cf78ad824e daily update 2008-11-18 00:00:08 +00:00
Ulrich Weigand d7b99e76e2 * configure.tgt [spu-*-elf*]: Set NATIVE_LIB_DIRS to '/lib'. 2008-11-17 20:11:48 +00:00
Ulrich Weigand a721238407 PR gdb/2250
* infrun.c (clear_proceed_status_thread): New function.
	(clear_proceed_status_callback): New function.
	(clear_proceed_status): In all-stop mode, clear per-thread
	proceed status of *all* threads, not only the current.
	(handle_inferior_event): In all-stop mode, if we're stepping
	one thread, but got some inferior event in another thread
	that does not cause GDB to break to the user interface,
	ensure the interrupted stepping operation continues in the
	original thread.
	(currently_stepping): Move thread-related tests to ...
	(currently_stepping_thread): ... this new function.
	(currently_stepping_callback): New function.
2008-11-17 18:50:22 +00:00
Nick Clifton 764c62eb01 Update copyright year in --version messages. 2008-11-17 17:44:32 +00:00
Vladimir Prus 66bb093b5f Implement =thread-selected notification.
* mi/mi-common.h (struct mi_interp): New, moved from ...
        * mi/mi-interp.c: ...here.
        * mi/mi-main.c (mi_execute_command): If the thread changed
        as result of command, report that.
2008-11-17 16:43:34 +00:00
Vladimir Prus 8dd4f202ec Implement continue/interrupt of thread groups.
* mi/mi-main.c (proceed_thread_callback): New.
        (mi_cmd_exec_continue): If --thread-group is specified, resume all
        threads in that group.
        (interrupt_thread_callback): New.
        (mi_cmd_exec_interrupt): If --thread-group is specified, interrupt
        all threads in that group.
2008-11-17 16:39:51 +00:00
Vladimir Prus 6418d433f1 Implement '-target-detach pid'.
* infcmd.c (detach_command): Make nonstatic.
        * inferior.h (detach_command): Declare.
        * mi/mi-cmds.c (mi_cmds): Don't route -target-detach via CLI.
        * mi/mi-cmds.h (mi_cmd_target_detach): Declare.
        * mi/mi-main.c (find_thread_of_process, mi_cmd_target_detach): New.
2008-11-17 16:37:35 +00:00
Vladimir Prus 3d043ef6a3 Include group-id in thread-created notification.
* mi/mi-interp.c (mi_new_thread, mi_thread_exit): Include
        group id in the output.
2008-11-17 12:34:19 +00:00
Vladimir Prus 4a92f99bc7 Notification for attach/detach.
* inferior.c: Call the process observers.
        * mi/mi-interp.c (mi_new_inferior, mi_inferior_exit): New.
        (mi_interpreter_init): Register the above.
2008-11-17 12:28:05 +00:00
Vladimir Prus 3ee1c036ac Implement -list-thread-groups.
* thread.c (print_thread_info): New parameter pid, to print
        threads of specific process.
        * gdbthread.h (print_thread_info): New parameter pid.
        * mi/mi-cmds.c (mi_cmds): Register -list-thread-groups.
        * mi/mi-cmds.h (mi_cmd_list_thread_groups): New.
        * mi/mi-main.c (mi_cmd_thread_info): Adjust.
        (print_one_process, mi_cmd_list_thread_groups): New.
2008-11-17 12:13:49 +00:00
gdbadmin 1604c175b2 *** empty log message *** 2008-11-17 00:00:33 +00:00
Alan Modra c0ef4cd878 daily update 2008-11-17 00:00:05 +00:00
Joel Brobecker 283de25fac Remove some unused macros related to the old load/unload catchpoints.
* breakpoint.c (SOLIB_LOADED_LIBRARY_PATHNAME)
        (SOLIB_UNLOADED_LIBRARY_PATHNAME, SOLIB_CREATE_CATCH_LOAD_HOOK)
        (SOLIB_CREATE_CATCH_UNLOAD_HOOK): Delete. No longer used.
2008-11-16 18:05:26 +00:00
Joel Brobecker 808104c836 * gdb.base/help.exp: Remove the "catch load" and "catch unload"
commands from the expected output for "help catch".
2008-11-16 18:03:25 +00:00
Joel Brobecker 533be4dd37 Remove support for catch load and catch unload commands.
* breakpoint.h (enum bptype): Remove bp_catch_load and bp_catch_unload.
        (struct breakpoint): Remove fields dll_pathname and
        triggered_dll_pathname.
        (bpstat_get_triggered_catchpoints, ep_is_shlib_catchpoint): Delete.
        * breakpoint.c (ep_is_catchpoint): Remove handling of
        bp_catch_load and bp_catch_unload.
        (print_it_typical, bpstat_check_location, bpstat_what)
        (print_one_breakpoint_location, print_one_breakpoint_location)
        (user_settable_breakpoint, allocate_bp_location)
        (set_raw_breakpoint_without_location, mention, delete_breakpoint,
        (breakpoint_re_set_one, disable_command, enable_command): Likewise.
        (ep_is_shlib_catchpoint, bpstat_get_triggered_catchpoints)
        (catch_load_command_1, catch_unload_command_1): Delete.
        (_initialize_breakpoint): Remove the "catch load" and "catch unload"
        command creation.
        * infrun.c (handle_inferior_event): Remove the handling of
        load/unload catchpoint events.
2008-11-16 18:01:46 +00:00
Danny Smith 9b91d2fc93 * dlltool.c (identify_search_section): Cast argument, not return
value, of xstrdup to 'char*'.
2008-11-16 06:00:41 +00:00
Alan Modra 23965a5aa6 daily update 2008-11-16 00:00:05 +00:00
gdbadmin 5ea394a1eb *** empty log message *** 2008-11-16 00:00:03 +00:00
Joel Brobecker 59205f5a0e From Jerome Guitton <guitton@adacore.com>
* dwarf2read.c (dwarf2_debug_line_missing_end_sequence_complaint):
        New function.
        (dwarf_decode_lines): Detect null file numbers. Detect the end of
        the line program sequence when no end sequence is emitted.
2008-11-15 18:49:50 +00:00
Joel Brobecker 00b22944a0 * gdb.ada/int_deref.exp: New testcase. 2008-11-15 18:30:38 +00:00
Joel Brobecker 9696763752 * ada-lang.c (ada_evaluate_subexp): Improve handling of integer
type dereferencing.
2008-11-15 18:27:27 +00:00
Charles Wilson d4732f7c88 Added --identify option to dlltool. 2008-11-15 18:15:18 +00:00
Daniel Jacobowitz da8bd9a3c5 * NEWS: Mention sparc64-linux-gnu gdbserver support. 2008-11-15 16:09:51 +00:00