This patch changes find_pc_partial_function so that *block is set to
nullptr when it fails, so that fill_in_stop_func won't access an
uninitialized variable.
gdb/ChangeLog:
2019-08-09 Pedro Franco de Carvalho <pedromfc@linux.ibm.com>
* blockframe.c (find_pc_partial_function): Set *block to nullptr
when the function fails.
The align.exp test case yields many FAILs on s390x, since GDB's _Alignoff
doesn't always agree with the compiler's. On s390x, the maximum alignment
is 8, but GDB returns an alignment of 16 for 16-byte data types such as
"long double".
This is fixed by implementing the type_align gdbarch method. The new
method returns an alignment of 8 for all integer, floating-point, and
vector types larger than 8 bytes. With this change, all align.exp tests
pass.
gdb/ChangeLog:
* s390-tdep.c (s390_type_align): New function.
(s390_gdbarch_init): Set it as type_align gdbarch method.
This patch is a reimplementation of [1] which was submitted in 2015 by
Neil Schellenberger. Copyright issue was sorted out [2] last year.
It proposed a new section (.gnu.xhash) and related dynamic tag
(DT_GNU_XHASH). The new section would be virtually identical to the
existing .gnu.hash except for the translation table (xlat) which would
contain correct MIPS .dynsym indexes corresponding to the hashvals in
chains. This is because MIPS ABI imposes a different ordering on the
dynsyms than the one expected by the .gnu.hash section. Another addition
would be a leading word (ngnusyms) which would contain the number of
entries in the translation table.
In this patch, the new section name and dynamic tag are changed to
reflect the fact that the section should be treated as MIPS-specific
(.MIPS.xhash and DT_MIPS_XHASH).
This patch addresses the alignment issue as reported in [3], which is
caused by the leading word added to the .MIPS.xhash section. Leading word
is removed in this patch, and the number of entries in the translation
table is now calculated using DT_MIPS_SYMTABNO dynamic tag (this is
addressed by the corresponding glibc patch).
Suggestions on coding style in [4] were taken into account. Existing
GNU hash testcase was covered, and another one was added in the MIPS
part of the testsuite.
The other major change is reserving MIPS ABI version 5 for .MIPS.xhash,
marking the need of support for .MIPS.xhash in the dynamic linker (again,
addressed in the corresponding glibc patch). This is something which I
am not sure of, especially after reading [5]. I am confused on whether
this ABI version is reserved for IFUNC, or it can be used for this
purpose.
Already mentioned glibc patch is submitted at:
https://sourceware.org/ml/libc-alpha/2019-06/msg00456.html
[1] https://sourceware.org/ml/binutils/2015-10/msg00057.html
[2] https://sourceware.org/ml/binutils/2018-03/msg00025.html
[3] https://sourceware.org/ml/binutils/2016-01/msg00006.html
[4] https://sourceware.org/ml/binutils/2016-02/msg00097.html
[5] https://sourceware.org/ml/libc-alpha/2016-12/msg00853.html
ld * emulparams/elf32bmip.sh: Add .MIPS.xhash section.
* emulparams/elf32bmipn32-defs.sh: Add .MIPS.xhash section.
* emulparams/elf64bmip-defs.sh: Add .MIPS.xhash section.
* emultempl/mipself.em: Remove mips_after_parse function.
* testsuite/ld-elf/hash.d: Update comment.
* testsuite/ld-mips-elf/hash1.d: New test.
* testsuite/ld-mips-elf/hash1.s: Ditto.
* testsuite/ld-mips-elf/hash1a.d: Remove.
* testsuite/ld-mips-elf/hash1b.d: Ditto.
* testsuite/ld-mips-elf/hash1c.d: Ditto
* testsuite/ld-mips-elf/hash2.d: New test.
* testsuite/ld-mips-elf/mips-elf.exp: New tests.
* testsuite/ld-mips-elf/start.s: New test.
bfd * elf-bfd.h (struct elf_backend_data): New members.
* elflink.c (_bfd_elf_link_create_dynamic_sections): Create
.gnu.hash section if necessary.
(struct collect_gnu_hash_codes): New member.
(elf_gnu_hash_process_symidx): New function name.
(elf_renumber_gnu_hash_syms): Ignore local and undefined
symbols. Record xlat location for every symbol which should have
a .MIPS.xhash entry.
(bfd_elf_size_dynamic_sections): Add DT_GNU_HASH dynamic tag to
dynamic section if necessary.
(GNU_HASH_SECTION_NAME): New define.
(bfd_elf_size_dynsym_hash_dynstr): Get .MIPS.xhash section.
Update the section size info.
* elfxx-mips.c (struct mips_elf_hash_sort_data): New members.
(struct mips_elf_link_hash_entry): New member.
(mips_elf_link_hash_newfunc): Initialize .MIPS.xhash translation
table location.
(mips_elf_sort_hash_table): Initialize the pointer to the
.MIPS.xhash section.
(mips_elf_sort_hash_table_f): Populate the .MIPS.xhash
translation table entry with the symbol dynindx.
(_bfd_mips_elf_section_from_shdr): Add SHT_MIPS_XHASH.
(_bfd_mips_elf_fake_sections): Initialize .MIPS.xhash section
info.
(_bfd_mips_elf_create_dynamic_sections): Create .MIPS.xhash
section.
(_bfd_mips_elf_size_dynamic_sections): Add DT_MIPS_XHASH tag to
dynamic section.
(_bfd_mips_elf_finish_synamic_sections): Add DT_MIPS_XHASH.
(_bfd_mips_elf_final_write_processing): Set .MIPS.xhash section
sh_link info.
(_bfd_mips_elf_get_target_dtag): Get DT_MIPS_XHASH tag.
(MIPS_LIBC_ABI_XHASH): New ABI version enum value.
(_bfd_mips_post_process_headers): Mark the ABI version as
MIPS_LIBC_ABI_XHASH if there exists a .MIPS.xhash section,
but not a .hash section.
(_bfd_mips_elf_record_xhash_symbol): New function. Record a
position in the translation table, associated with the hash
entry.
* elfxx-mips.h (literal_reloc_p): Define
elf_backend_record_xhash_symbol backend hook.
* elfxx-target.h: Initialize elf_backend_record_xhash_symbol
backend hook.
include * elf/mips.h (SHT_GNU_XHASH): New define.
(DT_GNU_XHASH): New define.
binutils * readelf.c (get_mips_dynamic_type): Return MIPS_XHASH dynamic type.
(get_mips_section_type_name): Return MI{S_XHASH name string.
(dynamic_section_mips_val): Initialize the .MIPS.xhash dynamic
info.
(process_symbol_table): Initialize the .MIPS.xhash section
pointer. Adjust the readelf output to support the new section.
(process_object): Set the .MIPS.xhash dynamic info to zero.
The following tests fail on wince as they rely on mapping symbols to
give them a fixed order.
This skips them on platforms that don't have mapping symbols.
binutils/ChangeLog:
* testsuite/binutils-all/arm/in-order-all.d: Skip on pe, wince, coff.
* testsuite/binutils-all/arm/in-order.d: Likewise.
* testsuite/binutils-all/arm/out-of-order-all.d: Likewise.
* testsuite/binutils-all/arm/out-of-order.d: Likewise.
In order to be able to add/remove insns to/from the middle of these
tests, generalize the patterns for the symbol reference comments of RIP-
relative operands.
With target board unix/-fPIE/-pie, we get:
...
FAIL: gdb.dwarf2/varval.exp: print varval2
...
This is due comparing a get_frame_pc result (which includes the for PIE
non-zero relocation offset) with pc_high and pc_low obtained using
get_scope_pc_bounds (which do not include the relocation offset).
Fix this by adjusting pc_high and pc_low with the relocation offset.
Tested on x86_64-linux with target board unix/-fPIE/-pie.
gdb/ChangeLog:
2019-08-09 Tom de Vries <tdevries@suse.de>
PR gdb/24591
* dwarf2read.c (dwarf2_fetch_die_loc_sect_off): Adjust pc_high and
pc_low with relocation offset.
With gdb.tui/basic.exp and check-read1, we run into (using -v for
verbose log):
...
^[[0+++ _csi_0 <<<>>>
ERROR: (DejaGnu) proc "_csi_0" does not exist.
...
In contrast, without check-read1, we have:
...
^[[0;10m<SNIP>+++ _csi_m <<<0;10>>>
...
The problem is that this regexp in _accept:
...
-re "^\x1b\\\[(\[0-9;\]*)(\[0-9a-zA-Z@\])" {
...
while matching the longer sequence '^[' '[' '0' ';' '1' '0' 'm', also matches
the shorter sequence '^[' '[' '0'.
The regexp attempts to match a CSI (Control Sequence Introducer) sequence, and
the final byte of such a sequence cannot be a digit.
Fix the regexp accordingly:
...
- -re "^\x1b\\\[(\[0-9;\]*)(\[0-9a-zA-Z@\])" {
+ -re "^\x1b\\\[(\[0-9;\]*)(\[a-zA-Z@\])" {
...
Tested on x86_64-linux.
gdb/testsuite/ChangeLog:
2019-08-08 Tom de Vries <tdevries@suse.de>
PR testsuite/24862
* lib/tuiterm.exp (_accept): Fix CSI regexp.
When printing unknown note types, readelf prints the raw description
section byte-by-byte. However, it does not mask appropriately, e.g. it
prints the byte 'ba' as 'ffffffba'.
* readelf.c (process_note): Mask unknown description data bytes.
PR 24854
* arc-dis.c (arc_insn_length): Return 0 rather than aborting when
encountering an unknown machine type.
(print_insn_arc): Handle arc_insn_length returning 0. In error
cases return -1 rather than calling abort.
I noticed the test for overflow of amt = size * nmemb in get_data
wasn't effective. An obvious example of nmemb = 3 and size = half max
value overflows but doesn't result in amt < nmemb. This patch fixes
this problem and reports a size truncation or overflow rather than out
of memory in more cases.
* readelf.c (get_data): Improve overflow checks.
PR 24777
* doc/binutils.texi: Ensure consistent formating of title strings
for man pages. Extend the title of the size man page to be more
informative.
This changes struct frame_arg to be self-managing and then fixes the
various users.
Tested by the buildbot.
gdb/ChangeLog
2019-08-07 Tom Tromey <tromey@adacore.com>
* stack.c (print_frame_arg, read_frame_local, read_frame_arg)
(print_frame_args): Update.
* python/py-framefilter.c (py_print_single_arg, enumerate_args):
Update.
* mi/mi-cmd-stack.c (list_arg_or_local): Update.
* frame.h (struct frame_arg): Add initializers.
<error>: Now a unique_xmalloc_ptr.
Armv8.3-a Pointer Authentication causes the function return address to be
obfuscated on entry to some functions. GDB must unmask the link register in
order to produce a backtrace.
The following patch adds markers of [PAC] to the bracktrace, to indicate
which addresses needed unmasking. This includes the backtrace when using MI.
For example, consider the following backtrace:
(gdb) bt
0 0x0000000000400490 in puts@plt ()
1 0x00000000004005dc in foo ("hello") at cbreak-lib.c:6
2 0x0000000000400604 [PAC] in bar () at cbreak-lib.c:12
3 0x0000000000400620 [PAC] in main2 () at cbreak.c:17
4 0x00000000004005b4 in main () at cbreak-3.c:10
The functions in cbreak-lib use pointer auth, which masks the return address
to the previous function, causing the addresses of bar (in the library) and main2
(in the main binary) to require unmasking in order to unwind the backtrace.
An extra bool is added alongside the prev_pc in the frame structure. At the
point at which the link register is unmasked, the AArch64 port calls into frame
to sets the bool. This is the most efficient way of doing it.
The marker is also added to the python frame printer, which is always printed if
set. The marker is not explicitly exposed to the python code.
I expect this will potentially cause issues with some tests in the testsuite
when Armv8.3 pointer authentication is used. This should be fixed up in the
the future once real hardware is available for full testsuite testing.
gdb/ChangeLog:
* NEWS: Expand the Pointer Authentication entry.
* aarch64-tdep.c (aarch64_frame_unmask_address): Rename from this.
(aarch64_frame_unmask_lr): ... to this.
(aarch64_prologue_prev_register, aarch64_dwarf2_prev_register):
Call aarch64_frame_unmask_lr.
* frame.c (struct frame_info): Add "masked" variable.
(frame_set_previous_pc_masked) (frame_get_pc_masked): New functions.
(fprint_frame): Check for masked pc.
* frame.h (frame_set_previous_pc_masked) (frame_get_pc_masked): New
declarations.
* python/py-framefilter.c (py_print_frame): Check for masked pc.
* stack.c (print_frame): Check for masked pc.
gdb/doc/ChangeLog:
* gdb.texinfo (AArch64 Pointer Authentication): New subsection.
This patch makes the elf64bpf emulation to use it's own linker script,
based on elf.sc. At the moment, the only change is that the BPF
executable doesn't define an entry symbol (BPF programs feature
several entry points scattered in several sections.)
This is a step towards the goal of generating proper ELF executables
that would be loaded by the kernel's libbpf. We are not there yet:
BPF "programs" should still be linked with -r.
This change removes a warning while linking executables, decreases the
number of unsupported tests in the target from 47 to 29, and increases
the number of expected passes from 104 to 145.
Regtested in x86_64 for all targets.
No regressions.
ld/ChangeLog:
2019-08-07 Jose E. Marchesi <jose.marchesi@oracle.com>
* scripttempl/elf64bpf.sc: Adapted from elf.sc.
* emulparams/elf64bpf.sh (SCRIPT_NAME): Use elf64bpf.
(EMBEDDED): Define.
* testsuite/ld-bpf/call-1.d: Do not expect a warning regarding an
undefined entry symbol.
* testsuite/ld-bpf/jump-1.d: Likewise.
* testsuite/ld-undefined/undefined.exp: Do not pass '-e entry' to
ld in BPF targets, and do not expect line number information.
* testsuite/ld-srec/srec.exp (run_srec_test): xfail s-record tests
in BPF targets.
This patch changes the eBPF linker to provide a relocate_section
function instead of relying on using special functions in relocation
howtos.
Tested in x86_64 host.
No regressions.
bfd/ChangeLog:
2019-08-07 Jose E. Marchesi <jose.marchesi@oracle.com>
* elf64-bpf.c (bpf_elf_relocate_section): New function.
(bpf_elf_insn_disp_reloc): Delete function.
(elf_backend_relocate_section): Define.
* testsuite/binutils-all/objdump.exp
(test_objdump_dotnet_assemblies): Fix test to distinguish errors
in parsing simple pei-i386 and pei-x86-64 vs parsing the newly
introduced machine types.
* testsuite/gentestdlls.c (write_simple_dll): New function.
(main): Generate simple and Linux-specific variants of pei-i386
and pei-x86-64 files so both can be used by tests.
The flag is supposed to be used in templates which allow for both a
"short" and a "long" format memory operand. Drop it from templates not
matching this pattern. In the control/status word cases it was (ab)used
in place of the intended IgnoreSize.
This introduces obstack_strndup and changes gdb to use it.
Note that obstack_strndup works like savestring, and not exactly like
xstrndup. The difference is that obstack_strndup uses the passed-in
length, while xstrndup uses strnlen to choose the length.
gdb/ChangeLog
2019-08-06 Tom Tromey <tom@tromey.com>
* stabsread.c (patch_block_stabs, read_one_struct_field)
(read_enum_type): Use obstack_strndup.
* rust-exp.y (rust_parser::copy_name): Use obstack_strndup.
* gdb_obstack.h (obstack_strndup): Use obstack_strndup.
* dwarf2read.c (guess_full_die_structure_name)
(anonymous_struct_prefix): Use obstack_strndup.
* dbxread.c (cp_set_block_scope): Use obstack_strndup.
* c-exp.y (yylex): Use obstack_strndup.
* ada-exp.y (write_object_renaming, write_ambiguous_var)
(write_var_or_type): Use obstack_strndup.
This adds an obstack_strdup overload that takes a std::string, and
changes a few spots in gdb to use it.
gdb/ChangeLog
2019-08-06 Tom Tromey <tom@tromey.com>
* symfile.c (reread_symbols): Use obstack_strdup.
* stabsread.c (read_type): Use obstack_strdup.
* gdb_obstack.h (obstack_strdup): New overload.
* dwarf2read.c (dwarf2_compute_name, create_dwo_unit_in_dwp_v1)
(create_dwo_unit_in_dwp_v2, build_error_marker_type)
(dwarf2_canonicalize_name): Use obstack_strdup.
* dbxread.c (read_dbx_symtab): Use obstack_strdup.
* cp-support.c (inspect_type, replace_typedefs_qualified_name):
Use obstack_strdup.
This changes obstack_strdup to be an inline function. This seems
better to me, considering how small it is; but also it follows what
the code did before the previous patch.
gdb/ChangeLog
2019-08-06 Tom Tromey <tom@tromey.com>
* gdb_obstack.h (obstack_strdup): Define.
* gdb_obstack.c (obstack_strdup): Don't define.
This changes gdb to use obstack_strdup when appropriate, rather than
the wordier obstack_copy0.
gdb/ChangeLog
2019-08-06 Tom Tromey <tom@tromey.com>
* xcoffread.c (SYMNAME_ALLOC, process_xcoff_symbol): Use
obstack_strdup.
* typeprint.c (typedef_hash_table::find_global_typedef): Use
obstack_strdup.
* symfile.c (allocate_compunit_symtab): Use obstack_strdup.
* stabsread.c (common_block_start): Use obstack_strdup.
* objfiles.c (set_objfile_main_name, objfile): Use
obstack_strdup.
* namespace.c (add_using_directive): Use obstack_strdup.
* mdebugread.c (parse_symbol, parse_type): Use obstack_strdup.
* jit.c (finalize_symtab): Use obstack_strdup.
* dwarf2read.c (fixup_go_packaging, dwarf2_physname)
(guess_partial_die_structure_name, partial_die_info::fixup)
(dwarf2_name): Use obstack_strdup.
* coffread.c (coff_read_struct_type, coff_read_enum_type): Use
obstack_strdup.
* c-exp.y (scan_macro_expansion): Use obstack_strdup.
* buildsym.c (buildsym_compunit::end_symtab_with_blockvector): Use
obstack_strdup.
* ada-lang.c (ada_decode_symbol): Use obstack_strdup.
Several approaches were discussed (mail or irc) to verify the invariants of
the GDB help documentation : checking with apropos ., modifying add_cmd
to do the check and output a warning, implement maintenance check-doc.
A selftest was finally chosen as:
* this can be run on demand, including by users if they want
to check user defined commands.
* it does not interact with the normal behaviour of apropos, define,
python, ...
(such as output warnings when a user defines a command help that
does not respect the doc).
* when the selftest runs, it checks the user defined and python
defined commands currently defined.
gdb/ChangeLog
* unittests/help-doc-selftests.c: New file.
* Makefile.in: Add the new file.
With this patch, the help docs now respect 2 invariants:
* The first line of a command help is terminated by a '.' character.
* The last character of a command help is not a newline character.
Note that the changes for the last invariant were done by Tom, as part of :
[PATCH] Remove trailing newlines from help text
https://sourceware.org/ml/gdb-patches/2019-06/msg00050.html
but some occurrences have been re-introduced since then.
Some help docs had to be rephrased/restructured to respect the above
invariants.
Before this patch, print_doc_line was printing the first line
of a command help documentation, but stopping at the first '.'
or ',' character.
This was giving inconsistent results :
* The first line of command helps was sometimes '.' terminated,
sometimes not.
* The first line of command helps was not always designed to be
readable/understandable/unambiguous when stopping at the first
'.' or ',' character.
This e.g. created the following inconsistencies/problems:
< catch exception -- Catch Ada exceptions
< catch handlers -- Catch Ada exceptions
< catch syscall -- Catch system calls by their names
< down-silently -- Same as the `down' command
while the new help is:
> catch exception -- Catch Ada exceptions, when raised.
> catch handlers -- Catch Ada exceptions, when handled.
> catch syscall -- Catch system calls by their names, groups and/or numbers.
> down-silently -- Same as the `down' command, but does not print anything.
Also, the command help doc should not be terminated by a newline
character, but this was not respected by all commands.
The cli-option -OPT framework re-introduced some occurences.
So, the -OPT build help framework was changed to not output newlines at the
end of %OPTIONS% replacement.
This patch changes the help documentations to ensure the 2 invariants
given above.
It implied to slightly rephrase or restructure some help docs.
Based on the above invariants, print_doc_line (called by
'apropos' and 'help' commands to print the first line of a command
help) now outputs the full first line of a command help.
This all results in a lot of small changes in the produced help docs.
There are less code changes than changes in the help docs, as a lot
of docs are produced by some code (e.g. the remote packet usage settings).
gdb/ChangeLog
2019-08-07 Philippe Waroquiers <philippe.waroquiers@skynet.be>
* cli/cli-decode.h (print_doc_line): Add for_value_prefix argument.
* cli/cli-decode.c (print_doc_line): Likewise. It now prints
the full first line, except when FOR_VALUE_PREFIX. In this case,
the trailing '.' is not output, and the first character is uppercased.
(print_help_for_command): Update call to print_doc_line.
(print_doc_of_command): Likewise.
* cli/cli-setshow.c (deprecated_show_value_hack): Likewise.
* cli/cli-option.c (append_indented_doc): Do not append newline.
(build_help_option): Append newline after first appended_indented_doc
only if a second call is done.
(build_help): Append 2 new lines before each option, except the first
one.
* compile/compile.c (_initialize_compile): Add new lines after
%OPTIONS%, when not at the end of the help.
Change help doc or code
producing the help doc to respect the invariants.
* maint-test-options.c (_initialize_maint_test_options): Likewise.
Also removed the new line after 'Options:', as all other commands
do not put an empty line between 'Options:' and the first option.
* printcmd.c (_initialize_printcmd): Likewise.
* stack.c (_initialize_stack): Likewise.
* interps.c (interpreter_exec_cmd): Fix "Usage:" line that was
incorrectly telling COMMAND is optional.
* ada-lang.c (_initialize_ada_language): Change help doc or code
producing the help doc to respect the invariants.
* ada-tasks.c (_initialize_ada_tasks): Likewise.
* breakpoint.c (_initialize_breakpoint): Likewise.
* cli/cli-cmds.c (_initialize_cli_cmds): Likewise.
* cli/cli-logging.c (_initialize_cli_logging): Likewise.
* cli/cli-setshow.c (_initialize_cli_setshow): Likewise.
* cli/cli-style.c (cli_style_option::add_setshow_commands,
_initialize_cli_style): Likewise.
* corelow.c (core_target_info): Likewise.
* dwarf-index-cache.c (_initialize_index_cache): Likewise.
* dwarf2read.c (_initialize_dwarf2_read): Likewise.
* filesystem.c (_initialize_filesystem): Likewise.
* frame.c (_initialize_frame): Likewise.
* gnu-nat.c (add_task_commands): Likewise.
* infcall.c (_initialize_infcall): Likewise.
* infcmd.c (_initialize_infcmd): Likewise.
* interps.c (_initialize_interpreter): Likewise.
* language.c (_initialize_language): Likewise.
* linux-fork.c (_initialize_linux_fork): Likewise.
* maint-test-settings.c (_initialize_maint_test_settings): Likewise.
* maint.c (_initialize_maint_cmds): Likewise.
* memattr.c (_initialize_mem): Likewise.
* printcmd.c (_initialize_printcmd): Likewise.
* python/lib/gdb/function/strfns.py (_MemEq, _StrLen, _StrEq,
_RegEx): Likewise.
* ravenscar-thread.c (_initialize_ravenscar): Likewise.
* record-btrace.c (_initialize_record_btrace): Likewise.
* record-full.c (_initialize_record_full): Likewise.
* record.c (_initialize_record): Likewise.
* regcache-dump.c (_initialize_regcache_dump): Likewise.
* regcache.c (_initialize_regcache): Likewise.
* remote.c (add_packet_config_cmd, init_remote_threadtests,
_initialize_remote): Likewise.
* ser-tcp.c (_initialize_ser_tcp): Likewise.
* serial.c (_initialize_serial): Likewise.
* skip.c (_initialize_step_skip): Likewise.
* source.c (_initialize_source): Likewise.
* stack.c (_initialize_stack): Likewise.
* symfile.c (_initialize_symfile): Likewise.
* symtab.c (_initialize_symtab): Likewise.
* target-descriptions.c (_initialize_target_descriptions): Likewise.
* top.c (init_main): Likewise.
* tracefile-tfile.c (tfile_target_info): Likewise.
* tracepoint.c (_initialize_tracepoint): Likewise.
* tui/tui-win.c (_initialize_tui_win): Likewise.
* utils.c (add_internal_problem_command): Likewise.
* valprint.c (value_print_option_defs): Likewise.
gdb/testsuite/ChangeLog
2019-08-07 Philippe Waroquiers <philippe.waroquiers@skynet.be>
* gdb.base/style.exp: Update tests for help doc new invariants.
* gdb.base/help.exp: Likewise.
This patch drops gdb's configury support for glibc's mcheck function.
It has been observed to cause false abort()s, because it is
thread-unsafe yet interposes every malloc/free operation. So if any
library transitively used by gdb also uses threads, then these
functions can easily corrupt their own checking data. These days, gcc
ASAN and valgrind provide high quality checking, and mcheck is
apparently itself being slowly deprecated.
So, let's stop linking to it. Attached patch drops the
autoconf/Makefile machinery for both gdb and gdbserver. No
testsuite-visible impact. IMHO not worth mentioning in NEWS.
See also: https://sourceware.org/bugzilla/show_bug.cgi?id=9939
gdb/ChangeLog
PR build/24886
* configure.ac: Drop enable-libmcheck support.
* configure, config.in: Rebuild.
* libmcheck.m4: Remove.
* acinclude.m4: Don't include it.
* Makefile.in: Don't distribute it.
* top.c (print_gdb_configuration): Don't mention it.
gdb/gdbserver/ChangeLog
PR build/24886
* configure.ac: Drop enable-libmcheck support.
* configure, config.in: Rebuild.
* acinclude.m4: Don't include it.
This adds more styling to the disassemble command. In particular,
addresses and function names in the disassembly are now styled.
This required fixing a small latent bug in set_output_style. This
function always passed NULL to emit_style_escape; but when writing to
a file other than gdb_stdout, it should emit the style escape
directly. (FWIW this is another argument for better integrating the
pager with ui_file and getting rid of this entire layer.)
gdb/ChangeLog
2019-08-06 Tom Tromey <tom@tromey.com>
* utils.c (set_output_style): Sometimes pass stream to
emit_style_escape.
* ui-out.h (class ui_out) <can_emit_style_escape>: Declare.
* record-btrace.c (btrace_insn_history): Update.
* mi/mi-out.h (class mi_ui_out) <can_emit_style_escape>: New
method.
* disasm.h (gdb_pretty_print_disassembler): Add uiout parameter.
Update initializers.
<m_uiout>: New field.
<m_di>: Move lower.
* disasm.c (gdb_pretty_print_disassembler::pretty_print_insn):
Remove "uiout" parameter.
(dump_insns): Update.
* cli-out.h (class cli_ui_out) <can_emit_style_escape>: Declare.
* cli-out.c (cli_ui_out::can_emit_style_escape): New method.
gdb/testsuite/ChangeLog
2019-08-06 Tom Tromey <tom@tromey.com>
* gdb.base/style.exp: Add disassemble test.
* gdb.base/style.c (some_called_function): New function.
(main): Use it.
For better readability and type safety.
gdb/ChangeLog:
2019-08-06 Christian Biesinger <cbiesinger@google.com>
* symtab.c (symbol_cache_lookup): Change int to enum block_enum.
(error_in_psymtab_expansion): Likewise.
(lookup_symbol_via_quick_fns): Likewise.
(basic_lookup_transparent_type_quick): Likewise.
(basic_lookup_transparent_type_1): Likewise.
print_source_lines_base reopens the source file every time that a
source line is to be printed. However, there's no need to do this so
frequently -- it's enough to do it when switching source files, and
otherwise rely on the cache.
The code seems to try to avoid these multiple opens; at a guess I'd
say something just got confused along the way.
This patch fixes the problem by reorganizing the code both to make it
more clear, and to ensure that reopens only occur when the "last
source visited" changes.
gdb/ChangeLog
2019-08-06 Tom Tromey <tromey@adacore.com>
* source.c (last_source_error): Now bool.
(print_source_lines_base): Make "noprint" bool. Only open
source file when last_source_visited changes.
Currently, gdb stores the number of lines and an array of file offsets
for the start of each line in struct symtab. This patch moves this
information to the source cache. This has two benefits.
First, it allows gdb to read a source file less frequently.
Currently, a source file may be read multiple times: once when
computing the file offsets, once when highlighting, and then pieces
may be read again while printing source lines. With this change, the
file is read once for its source text and file offsets; and then
perhaps read again if it is evicted from the cache.
Second, if multiple symtabs cover the same source file, then this will
share the file offsets between them. I'm not sure whether this
happens in practice.
gdb/ChangeLog
2019-08-06 Tom Tromey <tromey@adacore.com>
* annotate.c (annotate_source_line): Use g_source_cache.
* source-cache.c (source_cache::get_plain_source_lines): Change
parameters. Populate m_offset_cache.
(source_cache::ensure): New method.
(source_cache::get_line_charpos): New method.
(extract_lines): Move lower. Change parameters.
(source_cache::get_source_lines): Move lower.
* source-cache.h (class source_cache): Update comment.
<get_line_charpos>: New method.
<get_source_lines>: Update comment.
<clear>: Clear m_offset_cache.
<get_plain_source_lines>: Change parameters.
<ensure>: New method
<m_offset_cache>: New member.
* source.c (forget_cached_source_info_for_objfile): Update.
(info_source_command): Use g_source_cache.
(find_source_lines, open_source_file_with_line_charpos): Remove.
(print_source_lines_base, search_command_helper): Use g_source_cache.
* source.h (open_source_file_with_line_charpos): Don't declare.
* symtab.h (struct symtab) <nlines, line_charpos>: Remove.
* tui/tui-source.c (tui_source_window::do_scroll_vertical):
Use g_source_cache.
Currently the source cache will only store highlighted text. However,
there's no reason it could not also store plain text, when styling is
turned off.
This patch makes this change. This also simplifies the source cache
code somewhat.
gdb/ChangeLog
2019-08-06 Tom Tromey <tromey@adacore.com>
* source-cache.c (source_cache::get_plain_source_lines):
Remove "first_line" and "last_line" parameters.
(source_cache::get_source_lines): Cache plain text.
* source-cache.h (class source_cache)
<get_plain_source_lines>: Update.
The source cache was not returning the final \n of the requested range
of lines. This caused regressions with later patches in this series,
so this patch pre-emptively fixes the bug.
This adds a self-test of "extract_lines" to the source cache code. To
make it simpler to test, I changed extract_lines to be a static
function, and changed it's API a bit.
gdb/ChangeLog
2019-08-06 Tom Tromey <tromey@adacore.com>
* source-cache.c (extract_lines): No longer a method.
Changed type of parameter. Include final newline.
(selftests::extract_lines_test): New function.
(_initialize_source_cache): Likewise.
* source-cache.h (class source_cache)
<extract_lines>: Don't declare.
This changes breakpoint::filter to be a unique_xmalloc_ptr, removing
an explicit xfree, as well as a use of a "release" method.
gdb/ChangeLog
2019-08-06 Tom Tromey <tromey@adacore.com>
* breakpoint.c (init_breakpoint_sal): Update.
(breakpoint): Update.
* breakpoint.h (struct breakpoint) <filter>: Now a
unique_xmalloc_ptr.
This is a mostly cosmetic fix for cases like PR24873 where LTO
recompiled objects were supposed to be inserted inside a group. The
specific case handled by this patch is when the first file inside a
group is an archive, the first file claimed by the plugin. Prior to
this patch we would have inserted the recompiled objects before the
group, which doesn't matter really since the entire group will be
reloaded, but it looks a little wrong in map files.
PR 24873
* ldlang.c (find_replacements_insert_point): Return "before" flag.
(find_next_input_statement): New function.
(lang_process): When placing recompiled LTO objects before a
claimed archive, place them immediately before in the statement
list.
Reloading of archives (and checking --as-needed DSOs again) is
disabled until we hit the plugin insert point. It's necessary to do
that because in a case like lib1.a lto.o lib2.a where lib1.a and
lib2.a contain duplicate symbols, we want the lto.o recompiled object
to pull in objects from lib2.a as necessary, but not from lib1.a.
Unfortunately this heuristic fails when the insert point is inside a
group, because ld actually loads the symbols from the recompiled
object before running over the contours of the script, thus missing
the fact that new undefs appeared in the group.
PR 24873
* ldlang.c (plugin_undefs): New static var.
(open_input_bfds <lang_group_statement_enum>): Loop on
plugin_undefs and hitting plugin_insert point.
(lang_process <lto_plugin_active>): Set plugin_undefs.
Currently we support iteration on blocks; this patch extends that to make
subscript access work as well.
gdb/ChangeLog:
2019-08-05 Christian Biesinger <cbiesinger@google.com>
* NEWS: Mention dictionary access on blocks.
* python/py-block.c (blpy_getitem): New function.
(block_object_as_mapping): New struct.
(block_object_type): Use new struct for tp_as_mapping field.
gdb/doc/ChangeLog:
2019-08-05 Christian Biesinger <cbiesinger@google.com>
* python.texi (Blocks In Python): Document dictionary access on blocks.
gdb/testsuite/ChangeLog:
2019-08-05 Christian Biesinger <cbiesinger@google.com>
* gdb.python/py-block.exp: Test dictionary access on blocks.
Based on an explanation by tromey on IRC.
gdb/ChangeLog:
2019-08-05 Christian Biesinger <cbiesinger@google.com>
* objfiles.h (objfile): Add a comment describing partial symbols.
Running
make check-read1 TESTS="gdb.mi/list-thread-groups-available.exp"
on my machine results in timeout failures. Running it while having
`tail -F testsuite/gdb.log` on the side shows that the test is never
really blocked, it is just slow at consuming the large output generated
by `-list-thread-groups --available` (which lists all the processes on
the system).
If I increase the timeout to a large value, the test passes in ~30
seconds (compared to under 1 second normally).
Increase the timeout for the particular mi_gdb_test that is long to
execute under read1. The new timeout value is a bit arbitrary. The
default timeout is 10 seconds, so I set the new timeout to be
"old-timeout * 10", so 100 seconds in the typical case.
gdb/testsuite/ChangeLog:
PR gdb/24863
* gdb.mi/list-thread-groups-available.exp: Increase timeout for
-list-thread-groups --available test when running under
check-read1.
When running tests with check-read1, we run into some timeouts where the tests
are not easy to rewrite using gdb_test_sequence:
...
FAIL: gdb.base/help.exp: help data (timeout)
FAIL: gdb.base/help.exp: help files (timeout)
FAIL: gdb.base/help.exp: help internals (timeout)
FAIL: gdb.base/help.exp: help user-defined (timeout)
FAIL: gdb.base/help.exp: help breakpoint "b" abbreviation (timeout)
FAIL: gdb.base/help.exp: help breakpoint "br" abbreviation (timeout)
FAIL: gdb.base/help.exp: help breakpoint "bre" abbreviation (timeout)
FAIL: gdb.base/info-macros.exp: info macros 2 (timeout)
FAIL: gdb.base/info-macros.exp: next (timeout)
FAIL: gdb.base/info-macros.exp: info macros 3 (timeout)
FAIL: gdb.base/info-macros.exp: next (timeout)
FAIL: gdb.base/info-macros.exp: next (timeout)
FAIL: gdb.base/info-macros.exp: info macros (timeout)
FAIL: gdb.base/info-macros.exp: next (timeout)
FAIL: gdb.base/info-macros.exp: next (timeout)
FAIL: gdb.base/info-macros.exp: info macros 7 (timeout)
FAIL: gdb.cp/nested-types.exp: ptype S10 (limit = -1) // parse failed (timeout)
FAIL: gdb.cp/nested-types.exp: set print type nested-type-limit 1 (timeout)
...
Fix these by increasing the timeout by a factor 10.
Tested on x86_64-linux.
gdb/testsuite/ChangeLog:
2019-08-05 Tom de Vries <tdevries@suse.de>
PR testsuite/24863
* lib/gdb.exp (with_read1_timeout_factor): New proc.
* gdb.base/help.exp: Use with_read1_timeout_factor.
* gdb.base/info-macros.exp: Same.
* gdb.cp/nested-types.exp: Same.
