equivalence.
(rank_one_type): Use strcmp instead of == to compare type names.
Don't swap parm with arg when checking TYPE_CODE_REF types.
* valops.c (find_overload_match): Fix indentation. Compare
parameter rankings to 0..9, 10..99, and 100+ instead of 0, 10,
and 100.
spelling.
(test_enums): New procedure. Move enum tests from end of script
to here. Set breakpoint on function name instead of line number.
* gdb.c++/misc.cc (ClassWithEnum): Move past Foo definitions.
(enums2): New marker function.
(enums1): New function.
(main): Call enums1(). Move enum tests to enums1().
Committed by Elena Zannoni <ezannoni@cygnus.com>
* sh-tdep.c (sh_skip_prologue): Change prologue matching for modern
compilers.
(sh_frame_find_saved_regs): Ditto.
(sh_find_callers_reg): Stop if pc is zero.
(nindy_xfer_inferior_memory): Use dcache_xfer_memory() instead of
breaking transfer into chunks and using nindy_fetch_word() and
nindy_store_word().
* remote-bug.c (bug_xfer_memory): Use dcache_xfer_memory() instead
of breaking transfer into chunks and using gr_fetch_word() and
gr_store_word().
* remote.c (remote_fetch_word, remote_store_word): Removed.
* remote-utils.h (gr_fetch_word, gr_store_word): Removed.
* remote-utils.c (gr_fetch_word, gr_store_word): Removed.
* dcache.h (dcache_fetch, dcache_poke, dcache_poke_block): Removed.
* dcache.c (dcache_fetch, dcache_poke): Removed.
support. Incorporate most of tm-rs6000.h.
(find_toc_address_hook): Rename to rs6000_find_toc_address_hook.
(rs6000_set_host_arch_hook): Declare.
(read_memory_addr): Define.
(pop_frame): Rename to rs6000_pop_frame.
(rs6000_pop_frame, rs6000_fix_call_dummy, rs6000_push_arguments,
rs6000_frame_saved_pc, rs6000_frame_chain): Remove non-generic
dummy frame handling.
(branch_dest, rs6000_pop_frame, rs6000_skip_trampoline_code,
rs6000_frame_saved_pc, frame_get_saved_regs,
frame_initial_stack_address, rs6000_frame_chain,
rs6000_convert_from_func_ptr_addr): Call read_memory_addr instead
of read_memory_integer.
(branch_dest, rs6000_pop_frame, rs6000_push_arguments,
rs6000_skip_trampoline_code, rs6000_frame_saved_pc,
frame_get_saved_regs, frame_initial_stack_address,
rs6000_frame_chain): Replace 4 with TDEP->wordsize.
(skip_prologue): Recognize some 64-bit stack adjustments.
(push_dummy_frame, pop_dummy_frame, set_processor,
show_processor): Delete.
(frame_get_saved_regs): Manipulate saved register addresses using
CORE_ADDR instead of int.
(rs6000_create_inferior): New function.
(register_names_*[]): Change to struct reg registers_*[].
(variants[]): Assimilate into multi-arch approach.
(register_names_*[], variants[]): Refer to pre-PowerPC
architectures as POWER instead of RS6000.
* rs6000-nat.c: Ubiquitous changes for 64-bit support.
(vmap_secs, xcoff_relocate_symtab): Cast addresses
to unsigned long to avoid sign-extension errors.
(set_host_arch): New function.
(xcoff_relocate_symtab): Try disabling usleep(36000) workaround.
(rs6000_core_fns): Use new bfd_target_xcoff_flavour.
(_initialize_core_rs6000): Initialize rs6000_set_host_arch_hook.
* symfile.c (find_sym_fns): Remove special xcoff kludge.
* xcoffread.c (secnum_to_bfd_section): Initialize args.objfile.
(process_linenos): Query line struct size from coff
backend instead of using compile-time constant.
(enter_line_range): Likewise.
(read_xcoff_symtab): Pass "XCOFF64" instead of "XCOFF" to
record_debugformat() if appropriate.
(process_xcoff_symbol): Access symbol addresses using
SYMBOL_VALUE_ADDRESS instead of SYMBOL_VALUE.
(read_symbol_lineno): Retrieve XCOFF64 symbol names from strtbl.
(scan_xcoff_symtab): Likewise. Query syment struct size from
coff backend instead of using compile-time constant.
(xcoff_sym_fns): Set flavour to bfd_target_xcoff_flavour.
* Makefile.in (INTERNAL_LDFLAGS): Add $(MH_LDFLAGS) to list of flags
that this Makefile variable get set to. (From Kevin Buettner.)
* config/powerpc/aix.mh (MH_LDFLAGS): Add linker flags so that
the TOC doesn't overflow. (From Kevin Buettner.)
* config/powerpc/tm-ppc-aix.h: Move config decisions to
multi-arched rs6000-tdep.c.
* config/rs6000/tm-rs6000.h: Likewise.
(GDB_MULTI_ARCH): Define.
(skip_trampoline_code): Rename to rs6000_skip_trampoline_code.
(is_magic_function_pointer): Replace with
rs6000_convert_from_func_ptr_addr.
(TARGET_CREATE_INFERIOR_HOOK): Define.
(find_toc_address_hook): Rename to rs6000_find_toc_address_hook.
(rs6000_set_host_arch_hook): Declare.
* config/rs6000/nm-rs6000.h (CHILD_XFER_MEMORY): Define.
* dwarf2read.c (dump_die): Use the proper printf format for
printing DW_UNSND values; they're longs now.
* dwarf2read.c (dump_die): We can read DW_FORM_data8 now, on
at least some platforms, so print it out too.
2000-06-14 James E. Wilson <wilson@bletchleypark.cygnus.com>
* dwarf2read.c (struct attribute): Change unsnd and snd field types
to long.
(read_8_bytes): Change return type to long.
(read_unsigned_leb128): Change return type to long. Change type of
local result to long. Cast argument of left shift to long.
(read_signed_leb128): Likewise.
* gdb.base/annota1.exp (run until main breakpoint): Loosen up
the regular expression: accept an (almost) arbitrary sequence of
"frames-invalid" and "breakpoints-invalid" messages both before
and after the "starting" message.
(FIX_CALL_DUMMY): Redefined to call i386_fix_call_dummy.
(i386_fix_call_dummy): Add prototype.
* i386-tdep.c (i386_fix_call_dummy): New function based on the
code from the old FIX_CALL_DUMMY macro.
here.
(safe_symbol_file_add_stub): Redirect gdb_stdout as well as stderr.
(safe_symbol_file_add_cleanup): Restore gdb_stdout.
(info_dll_command): Use the pager for displaying DLLs since there are often
quite a few.
* config/i386/tm-embed.h: New file. Specific for embedded targets
like i386-elf, i386-coff and i386-aout.
* config/i386/embed.mt (): Specify tm-embed.h instead of the System V
header file.
* values.c (value_primitive_field): Copy VALUE_REGNO as well.
With typed registers we may have the location information in this field,
in addition to VALUE_ADDRESS (which was already being copied).
arch-utils.{h,c}. The ``set architecutre'' and ``set endian''
commands (part of the move) were implemented to use add_set_enum_cmd()
so that ``set architecture <tab>'' works.
before deleting and restoring it.
(safe_symbol_file_add): Ensure that gdb_stderr is flushed before reassigning
it.
(handle_load_dll): Split into two functions so that WFI can handle shared
library events.
(child_solib_loaded_library_pathname): New function.
(child_clear_solibs): New function. Clears shared library list.
(child_solib_add): New function. Adds shared library symbols.
(dll_symbol_command): New function. Handles "dll-symbol" command.
(info_dll_command): New function. Handles info "sharedlibrary" command.
(handle_exceptions): Eliminate 'ignore_trap' argument.
(get_child_debug_event): Eliminate two arguments. Return "pid" when
appropriate. Break out on most events to allow WFI to handle stuff.
(child_wait): Accomodate get_child_debug_event changes.
(child_attach): Clear thread list and list of loaded dlls.
(child_create_inferior): Clear list of loaded dlls. Use wait_for_inferior in a
loop to look for first "trap".
(child_resume): Avoid accessing a possibly-freed thread pointer.
(_initialize_inftarg): Add "dll-symbols", "sharedlibrary", and "info
dll", and "info sharedlibrary" commands.
* config/i386/tm-cygwin.h: Add some shared library (aka DLL) hooks.
(handle_load_dll): Change DLL name to lower case.
(handle_exception): Add a second argument indicating whether a breakpoint
should be ignored. Return a 0 if the breakpoint was ignored.
(get_child_debug_event): Pass argument to handle_exception to control whether a
breakpoint should be ignored.
(child_create_inferior): Use modern cygwin API. Explicitly clear last_sig.
Pass FIRST_EXCEPTION to get_child_debug_event for detection of first
breakpoint.
* configure.in: Eliminate unneeded WINDRES/DLLTOOL tests left over after last change.
* configure: Regenerate.
* config/i386/nbsdelf.mt: New file.
* config/i386/tm-nbsdelf.h: New file.
* config/i386/tm-nbsd.h: change include of tm-nbsd.h to
the more explicit config/tm-nbsd.h.
* sol-thread.c (rw_common): Circumstances (eg. a bug in Sun's
thread_db library) may cause this function to be called with an
illegal address, in which case procfs_to_xfer_memory will
return zero. Return an error code instead of looping forever.
and i[3456]86-*-netbsdelf*.
* config/i386/nm-nbsdelf.h: New file.
* config/i386/nbsdelf.mh: New file.
* config/i386/nm-nbsd.h: change include of nm-nbsd.h to
the more explicit config/nm-nbsd.h.
* config/i386/tm-nbsd.h: change include of tm-i386bsd.h to
tm-i386.h.
(SIGTRAMP_START, SIGTRAMP_END, SIGCONTEXT_PC_OFFSET): Define.
-------------------------------------------------------------------
(CANNOT_STORE_REGISTER): Define to cannot_fetch_register instead
of CANNOT_FETCH_REGISTER, if not already defined.
(supply_gregset): Call supply_register with NULL as its second
argument instead of supplying our own zeroed out buffer.
(fill_gregset): Copy contents of correct registers instead of the
contents of register REGNO.
* gregset.h: New file. Typedefs for gdb_gregset_t and
gdb_fpregset_t, prototypes for supply_gregset and friends.
* procfs.c: Include gregset.h. Delete local prototypes for
supply_gregset etc., and local typedef gdb_gregset_t etc.
* sol-thread.c: Include gregset.h, delete local prototypes,
add appropriate casts to gdb_gregset_t.
* uw-thread.c, lin-thread.c, core-sol2.c, core-regset.c,
sparc-tdep.c, ptx4-nat.c, ppc-linux-nat.c, mipsv4-nat.c,
m88k-nat.c, m68klinux-nat.c, m68k-tdep.c, irix5-nat.c,
irix4-nat.c, ia64-linux-nat.c, i386v4-nat.c, cxux-nat.c,
arm-linux-nat.c, alpha-nat.c: Include gregset.h.
* config/nm-linux.h: Define GDB_GREGSET_T, GDB_FPREGET_T.
* config/sparc/tm-sun4sol2.h: Ditto.
Nicholas Duffek
Andrew Cagney
Mark Kettenis
Michael Snyder
Christopher Faylor
Eli Zaretskii
Elena Zannoni
Kevin Buettner
Pierre Muller
J.T. Conklin
Jim Blandy
Jeff Law
Fernando Nasser
Daniel Berlin
Klee Dienes
Scott Bambrough
Alexandre Oliva
David Taylor