The -n command-line of x86 assembler disables optimization of alignment
directives, like ".balign 8, 0x90", with multi-byte nop instructions
such as leal 0(%esi),%esi.
PR gas/22464
* testsuite/gas/i386/align-1.s: New file.
* testsuite/gas/i386/align-1a.d: Likewise.
* testsuite/gas/i386/align-1b.d: Likewise.
* testsuite/gas/i386/i386.exp: Run align-1a and align-1b.
When debugging a program using a ravenscar runtime, the thread
layer sometimes gets confused, and even missing some threads.
This was traced to an assumption that ravenscar_wait was making,
which is that calling the "to_wait" target_ops method would
set the inferior_ptid, so that we could then use that assumption
to update our thread_list and current ptid. However, this has not
been the case for quite a while now. This patch fixes the problem
by assigning inferior_ptid the ptid returned by "to_wait".
gdb/ChangeLog:
* ravenscar-thread.c (ravenscar_wait): Update inferior ptid
with event ptid from the lower layer before doing the
ravenscar-specific update.
Connecting to a TSIM simulator over the remote protocol causes GDB
to crash with the following failed assertion:
(gdb) tar remote :1234
Remote debugging using :1234
/[...]/gdb/ravenscar-thread.c:182: internal-error: ravenscar_update_inferior_ptid: Assertion `!is_ravenscar_task (inferior_ptid)' failed.
A problem internal to GDB has been detected,
further debugging may prove unreliable.
Quit this debugging session? (y or n) y
What happens is the following. Upon connection to the target, GDB
sends a 'qfThreadInfo' query, which is the query asking the target
for the ID of the first thread, and TSIM replies 'm0':
Sending packet: $qfThreadInfo#bb...Ack
Packet received: m0
As a result of this, GDB takes the '0' as the TID, and because of it,
constructs a ptid whose value is {42000, 0, 0}. This trips our
!is_ravenscar_task check, because all it does to identify threads
corresponding to ravenscar tasks is that their lwp is null, because
that's how we construct their ptid.
But this is unfortunatly not sufficient when debugging with TSIM,
because the thread ID that TSIM returns causes the creation of
a ptid whose lwp is zero, which matches the current identification
scheme and yet is clearly not a ravenscar task.
The fix is to also make sure that the ptid's tid field is nonzero.
gdb/ChangeLog:
* ravenscar-thread.c (is_ravenscar_task): Also verify that
the ptid's TID is nonzero.
Trying to debug a program using a stripped version of the ravenscar
runtime, we can get the following error:
(gdb) cont
Continuing.
Cannot find Ada_Task_Control_Block type. Aborting
This is because the ravenscar-thread layer makes the assumption that
the runtime is built the way we expect it, meaning that the Ada tasking
units we rely on for Ada tasking debugging, are built with debugging
information, and that this debug information has not been stripped from
the runtime.
When this assumption is not true, resuming such a program can trigger
the error above, which then leads GDB a little confused. For instance,
we can see things like:
(gdb) bt
Target is executing.
This patch fixes the issue by disabling the ravenscar thread layer
if we detect that the runtime is missing some of the debugging info
we need in order to support Ada task debugging. This is the best
we can do, as the ravenscar-thread layer actually depends on the
ada-tasks layer to implement thread debugging.
gdb/ChangeLog:
* ada-lang.h (ada_get_tcb_types_info): Add declaration.
* ada-tasks.c (ada_get_tcb_types_info): Renames get_tcb_types_info.
Make non-static. Change return type to char *. Adjust code
accordingly. Rewrite the function's documentation.
(read_atcb): Adjust call to get_tcb_types_info accordingly.
* ravenscar-thread.c (ravenscar_inferior_created): Check that
we have enough debugging information in the runtime to support
Ada task debugging before we enable the ravenscar-thread layer.
This patch reworks the ravenscar-thread layer to remove the
assumption that the target only has 1 CPU. In particular,
when connected to a QEMU target over the remote protocol,
QEMU reports each CPU as one thread. This patch adapts
the ravenscar-thread layer to this, and adds a large comment
explaining the general design of this unit.
gdb/ChangeLog:
* ada-lang.h (ada_get_task_info_from_ptid): Add declaration.
* ada-tasks.c (ada_get_task_info_from_ptid): New function.
* ravenscar-thread.c: Add into comment.
(base_magic_null_ptid): Delete.
(base_ptid): Change documentation.
(ravenscar_active_task): Renames ravenscar_running_thread.
All callers updated throughout.
(is_ravenscar_task, ravenscar_get_thread_base_cpu): New function.
(ravenscar_task_is_currently_active): Likewise.
(get_base_thread_from_ravenscar_task): Ditto.
(ravenscar_update_inferior_ptid): Adjust to handle multiple CPUs.
(ravenscar_runtime_initialized): Likewise.
(get_running_thread_id): Add new parameter "cpu". Adjust
implementation to handle this new parameter.
(ravenscar_fetch_registers): Small adjustment to use
is_ravenscar_task and ravenscar_task_is_currently_active in
order to decide whether to use the target beneath or this
module's arch_ops.
(ravenscar_store_registers, ravenscar_prepare_to_store): Likewise.
(ravenscar_stopped_by_sw_breakpoint): Use
get_base_thread_from_ravenscar_task to get the underlying
thread, rather than using base_ptid.
(ravenscar_stopped_by_hw_breakpoint, ravenscar_stopped_by_watchpoint)
(ravenscar_stopped_data_address, ravenscar_core_of_thread):
Likewise.
(ravenscar_inferior_created): Do not set base_magic_null_ptid.
At the user level, this patch enhances the debugger to print the ID
of the base CPU a task is running on:
(gdb) info task 3
Ada Task: 0x13268
Name: raven1
Thread: 0x13280
LWP: 0
!!!-> Base CPU: 1
No parent
Base Priority: 127
State: Runnable
This new field is only printed when the base CPU is nonzero or, in
other words, if the base CPU info is being provided by the runtime.
For instance, on native systems, where threads/processes can "jump"
from CPU to CPU, the info is not available, and the output of the
command above then remains unchanged.
At the internal level, the real purpose of this change is to prepare
the way for ravenscar-thread to start handling SMP systems. For that,
we'll need to know which CPU each task is running on... More info
on that in the commit that actually adds support for it.
gdb/ChangeLog:
* ada-lang.h (struct ada_task_info) <base_cpu>: New field.
* ada-lang.c (struct atcb_fieldno) <base_cpu>: New field.
(get_tcb_types_info): Set fieldnos.base_cpu.
(read_atcb): Set task_info->base_cpu.
(info_task): Print "Base CPU" info if set by runtime.
We have noticed a regression in our watchpoint support when debugging
through the remote protocol a program running on a bare metal platform,
when the program uses what we call the Ravenscar Runtime.
This runtime is a subset of the Ada runtime defined by the Ravenscar
Profile. One of the nice things about this runtime is that it provides
tasking, which is equivalent to the concept of threads in C (it is
actually often mapped to threads, when available). For bare metal
targets, however, there is no OS, and therefore no thread layer.
What we did, then, was add a ravenscar-thread layer, which has insider
knowledge of the runtime to get the list of threads, but also all
necessary info to perform thread switching.
For the record, the commit which caused the regression is:
commit 799a2abe613be0645b84f5aaa050f2f91e6ae3f7
Date: Mon Nov 30 16:05:16 2015 +0000
Subject: remote: stop reason and watchpoint data address per thread
Running local-watch-wrong-thread.exp with "maint set target-non-stop
on" exposes that gdb/remote.c only records whether the target stopped
for a breakpoint/watchpoint plus the watchpoint data address *for the
last reported remote event*. But in non-stop mode, we need to keep
that info per-thread, as each thread can end up with its own
last-status pending.
Our testcase is very simple. We have a package defining a global
variable named "Watch"...
package Pck is
Watch : Integer := 1974;
end Pck;
... and a main subprogram which changes its value
procedure Foo is
begin
Pck.Watch := Pck.Watch + 1;
end Foo;
To reproduce, we built our program as usual, started it in QEMU,
and then connected GDB to QEMU...
(gdb) target remote :4444
(gdb) break _ada_foo
(gdb) cont <--- this is to make sure the program is started
and the variable we want to watch is initialized
... at which point we try to use a watchpoint on our global variable:
(gdb) watch watch
... but, upon resuming the execution with a "cont", we expected to
get a watchpoint-hit notification, such as...
(gdb) cont
Hardware watchpoint 2: watch
Old value = 1974
New value = 1975
0xfff00258 in foo () at /[...]/foo.adb:6
6 end Foo;
... but unfortunately, we get a SIGTRAP instead:
(gdb) cont
Program received signal SIGTRAP, Trace/breakpoint trap.
foo () at /[...]/foo.adb:6
6 end Foo;
What happens is that, on the one hand, the change in remote.c
now stores the watchpoint-hit notification info in the thread
that received it; and on the other hand, we have a ravenscar-thread
layer which manages the thread list on top of the remote protocol
layer. The two of them get disconnected, and this eventually results
in GDB not realizing that we hit a watchpoint. Below is how:
First, once connected and just before inserting our watchpoint,
we have the ravenscar-thread layer which built the list of threads
by extracting some info from inferior memory, giving us the following
two threads:
(gdb) info threads
Id Target Id Frame
1 Thread 0 "0Q@" (Ravenscar task) foo () at /[...]/foo.adb:5
* 2 Thread 0x24618 (Ravenscar task) foo () at /[...]/foo.adb:5
The first thread is the only thread QEMU told GDB about. The second
one is a thread that the ravenscar-thread added. QEMU has now way
to know about those threads, since they are really embedded inside
the program; that's why we have the ravenscar layer, which uses
inside-knowledge to extract the list of threads.
Next, we insert a watchpoint, which applies to all threads. No problem
so far.
Then, we continue; meaning that GDB sends a Z2 packet to QEMU to
get the watchpoint inserted, then a vCont to resume the program's
execution. The program hits the watchpoints, and thererfore QEMU
reports it back:
Packet received: T05thread:01;watch:000022c4;
Since QEMU knows about one thread and one thread only, it stands
to reason that it would say that the event applies to thread:01,
which is our first thread in the "info threads" listing. That
thread has a ptid of {42000, lwp=1, tid=0}.
This is where Pedro's change kicks in: Seeing this event, and
having determined that the event was reported for thread 01,
and therefore ptid {42000, lwp=1, tid=0}, it saves the watchpoint-hit
event info in the private area of that thread/ptid. Once this is
done, remote.c's event-wait layer returns.
Enter the ravenscar-thread layer of the event-wait, which does
a little dance to delegate the wait to underlying layers with
ptids that those layers know about, and then when the target_beneath's
to_wait is done, tries to figure out which thread is now the active
thread. The code looks like this:
1. inferior_ptid = base_ptid;
2. beneath->to_wait (beneath, base_ptid, status, 0);
3. [...]
4. ravenscar_update_inferior_ptid ();
5.
6. return inferior_ptid;
Line 1 is where we reset inferior_ptid to the ptid that
the target_beneath layer knows about, allowing us to then
call its to_wait implementation (line 2). And then, upon
return, we call ravenscar_update_inferior_ptid, which reads
inferior memory to determine which thread is actually active,
setting inferior_ptid accordingly. Then we return that
inferior_ptid (which, again, neither QEMU and therefore nor
the remote.c layer knows about).
Upon return, we eventually arrive to the part where we try
to handle the inferior event: we discover that we got a SIGTRAP
and, as part of its handling, we call watchpoints_triggered,
which calls target_stopped_by_watchpoint, which eventually
remote_stopped_by_watchpoint, where Pedro's change kicks in
again:
struct thread_info *thread = inferior_thread ();
return (thread->priv != NULL
&& thread->priv->stop_reason == TARGET_STOPPED_BY_WATCHPOINT);
Because the ravenscar-thread layer changed the inferior_ptid
to the ptid of the active thread, inferior_thread now returns
the private data of that thread. This is not the thread that
QEMU reported the watchpoint-hit on, and thus, the function
returns "no watchpoint hit, mister". Hence GDB not understanding
the SIGTRAP, thus reporting it verbatim.
The way we chose to fix the issue is by making sure that the
ravenscar-thread layer doesn't let the remote layer be called
with inferior_ptid being set to a thread that the remote layer
does not know about.
gdb/ChangeLog:
* ravenscar-thread.c (ravenscar_stopped_by_sw_breakpoint)
(ravenscar_stopped_by_hw_breakpoint, ravenscar_stopped_by_watchpoint)
(ravenscar_stopped_data_address, ravenscar_core_of_thread):
New functions.
(init_ravenscar_thread_ops): Set the to_stopped_by_sw_breakpoint,
to_stopped_by_hw_breakpoint, to_stopped_by_watchpoint,
to_stopped_data_address and to_core_of_thread fields of
ravenscar_ops.
Check in the object file generated from the older assembler as a
compressed file.
PR binutils/22451
* testsuite/binutils-all/x86-64/objects.exp: New file.
* testsuite/binutils-all/x86-64/pr22451.o.bz2: Likewise.
Current versions of GCC support switching the format used for "long double"
to either IBM double double or IEEE-128. The resulting binary is marked
via different setting of the Tag_GNU_Power_ABI_FP GNU attribute.
This patch checks this attribute to detect the format of the default
"long double" type and sets GDB's notion of the format accordingly.
The patch also adds support for the "__ibm128" type, which always uses
IBM double double format independent of the format used for "long double".
A new test case verifies that all three types, "long double", "__float128",
and "__ibm128" are correctly detected in all three compiler settings,
the default setting, -mabi=ieeelongdouble, and -mabi=ibmlongdouble.
gdb/ChangeLog:
2017-11-21 Ulrich Weigand <uweigand@de.ibm.com>
* ppc-tdep.h (enum powerpc_long_double_abi): New data type.
(struct gdbarch_tdep): New member long_double_abi.
* rs6000-tdep.c (rs6000_gdbarch_init): Initialize long_double_abi
member of tdep struct based on Tag_GNU_Power_ABI_FP attribute.
* ppc-linux-tdep.c (ppc_linux_init_abi): Install long double data
format depending on long_double_abi tdep member.
(ppc_floatformat_for_type): Handle __ibm128 type.
gdb/testsuite/ChangeLog:
2017-11-21 Ulrich Weigand <uweigand@de.ibm.com>
* gdb.arch/ppc-longdouble.exp: New file.
* gdb.arch/ppc-longdouble.c: Likewise.
This new testcase has a test that fails like this here:
$1 = (<data variable, no debug info> *) 0x60208c <some_minsym>
(gdb) FAIL: gdb.ada/minsyms.exp: print &some_minsym
The problem is that the testcase hardcodes an expected address for the
"some_minsym" variable, which obviously isn't stable.
Fix that by expecting $hex instead.
gdb/testsuite/ChangeLog:
2017-11-21 Pedro Alves <palves@redhat.com>
* gdb.ada/minsyms.exp: Accept any address for 'some_minsym'.
PR 22419
* emultempl/v850elf.em (v850_create_output_section_statements):
New function. Generate an error if attempting to convert the
format of the output file.
* testsuite/ld-unique/pr21529.d: Skip for the V850.
* testsuite/ld-elf/pr21884.d: Skip for the V850.
* dwarf.c (dwo_name, dwo_dir, dwo_id, dwo_id_len): New variables.
(read_and_display_attr_value): Record dwo variables if requested.
(display_augmentation_data): Rename to display_data and make
generic.
(load_dwo_file): New function. Loads a separate dwarf object
file.
(load_separate_debug_file): Add reporting and loading of separate
dwarf objet files.
* readelf.c (process_section_headers): Add do_debug_links to list
of flags requiring a debug dump.
(display_debug_section): Tidy up code.
* doc/debug.options.texi: Add note that dwo links will also be
followed.
* testsuite/binutils-all/debuglink.s: Tidy code.
* testsuite/binutils-all/dwo.s: New test file.
* testsuite/binutils-all/readelf.wk2: New file - expected output
from readelf.
* testsuite/binutils-all/readelf.exp: Run the new test.
Fix:
/Users/simark/src/binutils-gdb/gdb/darwin-nat.c:2404:3: error: no matching function for call to 'add_setshow_boolean_cmd'
add_setshow_boolean_cmd ("mach-exceptions", class_support,
^~~~~~~~~~~~~~~~~~~~~~~
gdb/ChangeLog:
* darwin-nat.c (set_enable_mach_exceptions): Constify parameter.
Here we want to find where we'd insert "after", so we want
std::lower_bound, not std::upper_bound.
gdb/ChangeLog:
2017-11-21 Pedro Alves <palves@redhat.com>
* dwarf2read.c (mapped_index::find_name_components_bounds)
<completion mode, upper bound>: Use std::lower_bound instead of
std::upper_bound.
(test_mapped_index_find_name_component_bounds): Remove incorrect
"t1_fund" from expected symbols.
This commit factors out the name-components-vector building and bounds
searching out of dw2_expand_symtabs_matching_symbol into separate
functions, and adds unit tests that:
- expose both the latent bug mentioned in the previous commit, and
also,
- for completeness exercise the 0xff character handling fixed in the
previous commit more directly.
The actual fix for the now-exposed bug is left for the following
patch.
gdb/ChangeLog:
2017-11-21 Pedro Alves <palves@redhat.com>
* dwarf2read.c (mapped_index::name_components_casing): New field.
(mapped_index) <build_name_components,
find_name_components_bounds): Declare new methods.
(mapped_index::find_name_components_bounds)
(mapped_index::build_name_components): New methods, factored out
from dw2_expand_symtabs_matching_symbol.
(check_find_bounds_finds)
(test_mapped_index_find_name_component_bounds): New.
(run_test): Rename to ...
(test_dw2_expand_symtabs_matching_symbol): ... this.
(run_test): Reimplement.
The find-upper-bound-for-completion algorithm in the name components
accelerator table in dwarf2read.c increments a char in a string, and
asserts that it's not incrementing a 0xff char, but that's incorrect.
First, we shouldn't be calling gdb_assert on input.
Then, if "char" is signed, comparing a caracther with "0xff" will
never yield true, which is caught by Clang with:
error: comparison of constant 255 with expression of type '....' (aka 'char') is always true [-Werror,-Wtautological-constant-out-of-range-compare]
gdb_assert (after.back () != 0xff);
~~~~~~~~~~~~~ ^ ~~~~
And then, 0xff is a valid character on non-UTF-8/ASCII character sets.
E.g., it's 'ÿ' in Latin1. While GCC nor Clang support !ASCII &&
!UTF-8 characters in identifiers (GCC supports UTF-8 characters only
via UCNs, see https://gcc.gnu.org/onlinedocs/cpp/Character-sets.html),
but other compilers might (Visual Studio?), so it doesn't hurt to
handle it correctly. Testing is covered by extending the
dw2_expand_symtabs_matching unit tests with relevant cases.
However, without further changes, the unit tests still fail... The
problem is that cp-name-parser.y assumes that identifiers are ASCII
(via ISALPHA/ISALNUM). This commit fixes that too, so that we can
unit test the dwarf2read.c changes. (The regular C/C++ lexer in
c-lang.y needs a similar treatment, but I'm leaving that for another
patch.)
While doing this, I noticed a thinko in the computation of the upper
bound for completion in dw2_expand_symtabs_matching_symbol. We're
using std::upper_bound but we should use std::lower_bound. I extended
the unit test with a case that I thought would expose it, this one:
+ /* These are used to check that the increment-last-char in the
+ matching algorithm for completion doesn't match "t1_fund" when
+ completing "t1_func". */
+ "t1_func",
+ "t1_func1",
+ "t1_fund",
+ "t1_fund1",
The algorithm actually returns "t1_fund1" as lower bound, so "t1_fund"
matches incorrectly. But turns out the problem is masked because
later here:
for (;lower != upper; ++lower)
{
const char *qualified = index.symbol_name_at (lower->idx);
if (!lookup_name_matcher.matches (qualified)
the lookup_name_matcher.matches check above filters out "t1_fund"
because that doesn't start with "t1_func".
I'll fix the latent bug in follow up patches, after factoring things
out a bit in a way that allows unit testing the relevant code more
directly.
gdb/ChangeLog:
2017-11-21 Pedro Alves <palves@redhat.com>
* cp-name-parser.y (cp_ident_is_alpha, cp_ident_is_alnum): New.
(symbol_end): Use cp_ident_is_alnum.
(yylex): Use cp_ident_is_alpha and cp_ident_is_alnum.
* dwarf2read.c (make_sort_after_prefix_name): New function.
(dw2_expand_symtabs_matching_symbol): Use it.
(test_symbols): Add more symbols.
(run_test): Add tests.
The gdb.base/whatis-ptype-typedefs.exp testcase has several tests that
fail on 32-bit architectures. E.g., on 'x86-64 -m32', I see:
...
FAIL: gdb.base/whatis-ptype-typedefs.exp: lang=c: cast: whatis (float_typedef) v_uchar_array_t_struct_typedef (invalid)
FAIL: gdb.base/whatis-ptype-typedefs.exp: lang=c: cast: ptype (float_typedef) v_uchar_array_t_struct_typedef (invalid)
...
gdb.log:
(gdb) whatis (float_typedef) v_uchar_array_t_struct_typedef
type = float_typedef
(gdb) FAIL: gdb.base/whatis-ptype-typedefs.exp: lang=c: cast: whatis (float_typedef) v_uchar_array_t_struct_typedef (invalid)
As Simon explained [1], the issue boils down to the fact that on
64-bit, this is an invalid cast:
(gdb) p (float_typedef) v_uchar_array_t_struct_typedef
Invalid cast.
while on 32 bits it is valid:
(gdb) p (float_typedef) v_uchar_array_t_struct_typedef
$1 = 1.16251721e-41
The expression basically tries to cast an array (which decays to a
pointer) to a float. The cast works on 32 bits because a float and a
pointer are of the same size, and value_cast works in that case:
~~~
More general than a C cast: accepts any two types of the same length,
and if ARG2 is an lvalue it can be cast into anything at all. */
~~~
On 64 bits, they are not the same size, so it ends throwing the
"Invalid cast" error.
The testcase is expecting the invalid cast behavior, thus the FAILs.
A point of these tests was to cover as many code paths in value_cast
as possible, as a sort of documentation of the current behavior:
# The main idea here is testing all the different paths in the
# value casting code in GDB (value_cast), making sure typedefs are
# preserved.
...
# We try all combinations, even those that don't parse, or are
# invalid, to catch the case of a regression making them
# inadvertently valid. For example, these convertions are
# invalid:
...
In that spirit, this commit makes the testcase adjust itself depending
on size of floats and pointers, and also test floats of different
sizes.
Passes cleanly on x86-64 GNU/Linux both -m64/-m32.
[1] - https://sourceware.org/ml/gdb-patches/2017-11/msg00382.html
gdb/ChangeLog:
2017-11-20 Pedro Alves <palves@redhat.com>
* gdb.base/whatis-ptype-typedefs.c (double_typedef)
(long_double_typedef): New typedefs.
Use DEF on double and long double.
* gdb.base/whatis-ptype-typedefs.exp: Add double and long double
cases.
(run_tests): New 'float_ptr_same_size', 'double_ptr_same_size',
and 'long_double_ptr_same_size' locals. Use them to decide
whether cast from array/function to float is valid/invalid.
PR 22450
gas * elf-properties.c (_bfd_elf_link_setup_gnu_properties): Skip
objects without a GNU_PROPERTY note section when looking for a bfd
onto which notes can be accumulated.
ld * testsuite/ld-elf/elf.exp: Add --defsym ALIGN=2|3 to assembler
command line depending upon the size of the target address space.
* testsuite/ld-elf/pr22450.s: New test file.
* testsuite/ld-elf/pr22450.d: New test driver.
* testsuite/config/default.exp: Add note that LD_CLASS refers to
the size of the host linker not the size of the target linker.
Setting SHF_GROUP unconditionally on rel/rela sections associated with
SHF_GROUP sections fails badly with objcopy/strip and ld -r if the
input file SHT_GROUP section didn't specify the rel/rela sections.
This patch rearranges where SHF_GROUP is set for rel/rela sections.
PR 22451
PR 22460
* elf.c (_bfd_elf_init_reloc_shdr): Delete "sec_hdr" parameter
and leave rel_hdr->sh_flags zero. Update calls.
(bfd_elf_set_group_contents): Check input rel/rela SHF_GROUP
flag when !gas before adding rel/rela section to group. Set
output rel/rela SHF_GROUP flags.
Replace with for_each_thread.
gdb/gdbserver/ChangeLog:
* linux-low.c (kill_one_lwp_callback): Return void, take
argument directly, don't filter on pid.
(linux_kill): Use for_each_thread.
Replace with find_thread. Instead of setting the flag in the callback,
make the callback return true/false, and check the result against NULL
in the caller.
gdb/gdbserver/ChangeLog:
* linux-low.c (resume_status_pending_p): Return bool, remove
flag_p argument.
(linux_resume): Use find_thread.
Replace it with for_each_thread.
gdb/gdbserver/ChangeLog:
* linux-low.c (struct thread_resume_array): Remove.
(linux_set_resume_request): Return void, take arguments
directly.
(linux_resume): Use for_each_thread.
Replace with for_each_thread. I inlined unsuspend_one_lwp in
unsuspend_all_lwps, since it is very simple.
gdb/gdbserver/ChangeLog:
* linux-low.c (unsuspend_one_lwp): Remove.
(unsuspend_all_lwps): Use for_each_thread, inline code from
unsuspend_one_lwp.
Replace find_inferior with find_thread. Since it may be useful in the
future, I added another overload to find_thread which filters based on a
ptid (using ptid_t::matches), so now iterate_over_lwps doesn't have to
do the filtering itself. iterate_over_lwps_filter is removed and
inlined into iterate_over_lwps.
gdb/gdbserver/ChangeLog:
* gdbthread.h (find_thread): Add overload with ptid_t filter.
* linux-low.c (struct iterate_over_lwps_args): Remove.
(iterate_over_lwps_filter): Remove.
(iterate_over_lwps): Use find_thread.
Replace with for_each_thread, and inline code from
reset_lwp_ptrace_options_callback.
gdb/gdbserver/ChangeLog:
* linux-low.c (reset_lwp_ptrace_options_callback): Remove.
(linux_handle_new_gdb_connection): Use for_each_thread, inline
code from reset_lwp_ptrace_options_callback.
Replace two usages with the overload of for_each_thread that filters on
pid. It allows to simplify the callback a little bit.
gdb/gdbserver/ChangeLog:
* linux-arm-low.c (struct update_registers_data): Remove.
(update_registers_callback): Return void, take arguments
directly, don't check thread's pid.
(arm_insert_point, arm_remove_point): Use for_each_thread.
Replace with for_each_thread.
gdb/gdbserver/ChangeLog:
* win32-low.c (continue_one_thread): Return void, take argument
directly.
(child_continue): Use for_each_thread.
Straightforward replacement of find_inferior with the overload of
for_each_thread that filters on pid. I am able to build-test this
patch, but not run it.
gdb/gdbserver/ChangeLog:
* win32-i386-low.c (update_debug_registers_callback): Rename
to ...
(update_debug_registers): ... this, return void, remove pid_p arg.
(x86_dr_low_set_addr, x86_dr_low_set_control): Use for_each_thread.
Symbols like *ABS* defined in bfd/section.c:global_syms are not
elf_symbol_type. They can appear on relocs and perhaps other places
in an ELF bfd, so a number of places in nm.c and objdump.c are wrong
to cast an asymbol based on the bfd being ELF. I think we lose
nothing by excluding all section symbols, not just the global_syms.
PR 22443
* nm.c (sort_symbols_by_size): Don't attempt to access
section symbol internal_elf_sym.
(print_symbol): Likewise. Don't call bfd_get_symbol_version_string
for section symbols.
* objdump.c (compare_symbols): Don't attempt to access
section symbol internal_elf_sym.
(objdump_print_symname): Don't call bfd_get_symbol_version_string
for section symbols.
binutils/
* readelf.c (elf/riscv.h): Alphabetize include.
(is_32bit_inplace_add_reloc, is_32bit_inplace_sub_reloc)
(is_64bit_inplace_add_reloc, is_64bit_inplace_sub_reloc)
(is_16bit_inplace_add_reloc, is_16bit_inplace_sub_reloc)
(is_8bit_inplace_add_reloc, is_8bit_inplace_sub_reloc): New.
(apply_relocations): New locals reloc_inplace and reloc_subtract.
Call the new functions and set the new locals. Call byte_get if
reloc_inplace. Subtract sym->st_value if reloc_subtract.
This changes struct symbol to use an enum to encode the concrete
subclass of a particular symbol. Note that "enum class" doesn't work
properly with bitfields, so a plain enum is used.
2017-11-17 Tom Tromey <tom@tromey.com>
* symtab.h (enum symbol_subclass_kind): New.
(struct symbol) <is_cplus_template_function, is_rust_vtable>:
Remove.
<subclass>: New member.
(SYMBOL_IS_CPLUS_TEMPLATE_FUNCTION): Update.
* rust-lang.c (rust_get_trait_object_pointer): Update.
* dwarf2read.c (read_func_scope): Update.
(read_variable): Update.
This changes template_symbol to derive from symbol, which seems a bit
cleaner; and also more consistent with rust_vtable_symbol.
2017-11-17 Tom Tromey <tom@tromey.com>
* dwarf2read.c (read_func_scope): Update.
* symtab.h (struct template_symbol): Derive from symbol.
<base>: Remove.
In Rust, virtual tables work a bit differently than they do in C++. In
C++, as you know, they are connected to a particular class hierarchy.
Rust, instead, can generate a virtual table for potentially any type --
in fact, one such virtual table for each trait (a trait is similar to an
abstract class or to a Java interface) that a type implements.
Objects that are referenced via a trait can't currently be inspected by
gdb. This patch implements the Rust equivalent of "set print object".
gdb relies heavily on the C++ ABI to decode virtual tables; primarily to
make "set print object" work; but also "info vtbl". However, Rust does
not currently have a specified ABI, so this approach seems unwise to
emulate.
Instead, I've changed the Rust compiler to emit some DWARF that
describes trait objects (previously their internal structure was
opaque), vtables (currently just a size -- but I hope to expand this in
the future), and the concrete type for which a vtable was emitted.
The concrete type is expressed as a DW_AT_containing_type on the
vtable's type. This is a small extension to DWARF.
This patch adds a new entry to quick_symbol_functions to return the
symtab that holds a data address. Previously there was no way in gdb to
look up a full (only minimal) non-text symbol by address. The psymbol
implementation of this method works by lazily filling in a map that is
added to the objfile. This avoids slowing down psymbol reading for a
feature that is likely to not be used too frequently.
I did not update .gdb_index. My thinking here is that the DWARF 5
indices will obsolete .gdb_index soon-ish, meaning that adding a new
feature to them is probably wasted work. If necessary I can update the
DWARF 5 index code when it lands in gdb.
Regression tested on x86-64 Fedora 25.
2017-11-17 Tom Tromey <tom@tromey.com>
* symtab.h (struct symbol) <is_rust_vtable>: New member.
(struct rust_vtable_symbol): New.
(find_symbol_at_address): Declare.
* symtab.c (find_symbol_at_address): New function.
* symfile.h (struct quick_symbol_functions)
<find_compunit_symtab_by_address>: New member.
* symfile-debug.c (debug_qf_find_compunit_symtab_by_address): New
function.
(debug_sym_quick_functions): Link to
debug_qf_find_compunit_symtab_by_address.
* rust-lang.c (rust_get_trait_object_pointer): New function.
(rust_evaluate_subexp) <case UNOP_IND>: New case. Call
rust_get_trait_object_pointer.
* psymtab.c (psym_relocate): Clear psymbol_map.
(psym_fill_psymbol_map, psym_find_compunit_symtab_by_address): New
functions.
(psym_functions): Link to psym_find_compunit_symtab_by_address.
* objfiles.h (struct objfile) <psymbol_map>: New member.
* dwarf2read.c (dwarf2_gdb_index_functions): Update.
(process_die) <DW_TAG_variable>: New case. Call read_variable.
(rust_containing_type, read_variable): New functions.
2017-11-17 Tom Tromey <tom@tromey.com>
* gdb.rust/traits.rs: New file.
* gdb.rust/traits.exp: New file.
