signals. Use that in favour of the old code to get rid of
superfluous SIGINTs.
(lin_lwp_wait): Use the new support in stop_wait_callback to
flush all but one SIGINT.
config/m68k/xm-linux.h, config/powerpc/xm-linux.h,
config/sparc/xm-linux.h, config/ia64/xm-linux.h (HAVE_TERMIOS):
Removed. Taken care of by autoconf and terminal.h.
* config/sh/tm-sh.h (struct gdbarch_tdep): Add
FLOAT_ARGLAST_REGNUM, RETURN_REGNUM, ARG0_REGNUM, ARGLAST_REGNUM,
PR_REGNUM fields.
* sh-tdep.c (sh_skip_prologue_hard_way): Rename from
skip_prologue_hard_way().
(skip_prologue_hard_way): Make it a function pointer.
(sh_print_register): Use function pointer do_pseudo_register,
instead of sh_do_pseudo_register.
(sh_do_registers_info): Ditto.
(sh_gdbarch_init): Initialize do_pseudo_register.
(IS_MOV_TO_R14): Rename from IS_MOV_R14.
(skip_prologue_hard_way): Update.
(sh_gdbarch_init): Move setting of frame_chain,
get_saved_register, init_extra_frame_info, push_arguments,
extract_return_value, pop_frame, store_struct_return,
extract_struct_value_address, use_struct_convention,
init_extra_frame_info to before target specific settings.
(sh_gdbarch_init): Initialize new tdep fields
FLOAT_ARGLAST_REGNUM, RETURN_REGNUM, ARG0_REGNUM, ARGLAST_REGNUM,
PR_REGNUM.
(sh_push_arguments): Use new gdbarch_tdep fields
{ARG0,ARGLAST}_REGNUM.
(sh_saved_pc_after_call, sh_nofp_frame_init_saved_regs,
sh_init_extra_frame_info, sh_push_return_address,
sh_generic_show_regs, sh3_show_regs, sh3e_show_regs,
sh3_dsp_show_regs, sh4_show_regs, sh_dsp_show_regs): Update to use
gdbarch_tdep->PR_REGNUM.
(dr_reg_base_num, fv_reg_base_num): Move to earlier in the file.
* elf64-alpha.c (elf64_alpha_check_relocs): Only use the same
ALLOC|LOAD flags as the source section for debugging sections
when creating the reloc section.
of SIGIO.
(input_interrupt): Don't block on read, in case we got redundant
SIGIO. Don't gripe about redundant SIGIO.
* gdbserver/low-hppabsd.c (mywait): Use waitpid(). Enable SIGIO
handler while waiting.
* gdbserver/low-linux.c (mywait): Likewise.
* gdbserver/low-nbsd.c (mywait): Likewise.
* gdbserver/low-sparc.c (mywait): Likewise.
(go32_info_dos_command): New function.
(_initialize_go32_nat): Convert all DOS-specific commands into
subcommands of "info dos". Suggested by Andrew Cagney
<ac131313@redhat.com>.
reasonable defaults for REALTIME_LO and REALTIME_HI if they're not
already defined.
* config/nm-linux.h: Include <signal.h>.
[__SIGRTMIN] (REALTIME_LO, REALTIME_HI): Define to __SIGRTMIN and
(__SIGRTMAX + 1) respectively.
* config/obj-elf.c (obj_elf_section): md_elf_section_change_data_hook
added to grab section information after it's been extracted from the
.section directive.
longer disagree on how big pointers are.
* findvar.c (value_from_register): Remove special case code for D10V.
* printcmd.c (print_frame_args): Same.
* valops.c (value_at, value_fetch_lazy): Same.
* values.c (unpack_long): Same.
* gdbarch.sh: Changes to effect the following:
* gdbarch.h (GDB_TARGET_IS_D10V, D10V_MAKE_DADDR,
gdbarch_d10v_make_daddr_ftype, gdbarch_d10v_make_daddr,
set_gdbarch_d10v_make_daddr, D10V_MAKE_IADDR,
gdbarch_d10v_make_iaddr_ftype, gdbarch_d10v_make_iaddr,
set_gdbarch_d10v_make_iaddr, D10V_DADDR_P,
gdbarch_d10v_daddr_p_ftype, gdbarch_d10v_daddr_p,
set_gdbarch_d10v_daddr_p, D10V_IADDR_P,
gdbarch_d10v_iaddr_p_ftype, gdbarch_d10v_iaddr_p,
set_gdbarch_d10v_iaddr_p, D10V_CONVERT_DADDR_TO_RAW,
gdbarch_d10v_convert_daddr_to_raw_ftype,
gdbarch_d10v_convert_daddr_to_raw,
set_gdbarch_d10v_convert_daddr_to_raw, D10V_CONVERT_IADDR_TO_RAW,
gdbarch_d10v_convert_iaddr_to_raw_ftype,
gdbarch_d10v_convert_iaddr_to_raw,
set_gdbarch_d10v_convert_iaddr_to_raw): Delete declarations.
* gdbarch.c: Delete the corresponding definitions.
(struct gdbarch): Delete members d10v_make_daddr,
d10v_make_iaddr, d10v_daddr_p, d10v_iaddr_p,
d10v_convert_daddr_to_raw, and d10v_convert_iaddr_to_raw.
(startup_gdbarch): Remove initializers for the above.
(verify_gdbarch, gdbarch_dump): Don't verify or dump them any
more.
* d10v-tdep.c (d10v_register_virtual_type): Rather that
claiming the stack pointer and PC are 32 bits long (which they
aren't), say that the stack pointer is an int16_t, and the
program counter is a function pointer. This allows the rest
of GDB to make the appropriate conversions between the code
pointer format and real addresses.
(d10v_register_convertible, d10v_register_convert_to_virtual,
d10v_register_convert_to_raw): Delete function; no registers
are convertible now, so we use
generic_register_convertible_not instead.
(d10v_address_to_pointer, d10v_pointer_to_address): New gdbarch
methods.
(d10v_push_arguments, d10v_extract_return_value): Remove special
cases for code and data pointers.
(d10v_gdbarch_init): Set gdbarch_ptr_bit to 16, so that GDB and
the target agree on how large pointers are. Say that addresses
are 32 bits long. Register the address_to_pointer and
pointer_to_address conversion functions. Since no registers are
convertible now, register generic_register_convertible_not as the
gdbarch_register_convertible method instead of
d10v_register_convertible. Remove registrations for
d10v_register_convert_to_virtual,
d10v_register_convert_to_raw, gdbarch_d10v_make_daddr,
gdbarch_d10v_make_iaddr, gdbarch_d10v_daddr_p,
gdbarch_d10v_iaddr_p, gdbarch_d10v_convert_daddr_to_raw, and
gdbarch_d10v_convert_iaddr_to_raw.
include of "serial.h".
* Makefile.in (remote_utils_h): Update.
* monitor.h (struct serial): Declare as opaque. Remove include of
"serial.h".
(struct monitor_ops): Replace serial_t with `struct serial *'.
* monitor.c (monitor_desc): Ditto.
