1878 Commits
Author | SHA1 | Message | Date |
---|---|---|---|
Tom Tromey | d59b55f095 |
Use gdb::byte_vector in target_write_memory
Pedro pointed out that target_write_memory should use gdb::byte_vector rather than std::vector<unsigned char>. gdb/gdbserver/ChangeLog 2019-08-15 Tom Tromey <tromey@adacore.com> * target.c (target_write_memory): Use gdb::byte_vector. |
|
Tom Tromey | 4196ab2a6d |
Replace write_inferior_memory with target_write_memory
target_write_memory is just a simple wrapper for write_inferior_memory. Because target_write_memory is needed for gdbsupport, and because gdb uses the name "target_write_memory" everywhere, this patch renames write_inferior_memory and removes the wrapper. I think this brings gdb and gdbserver slightly more in sync. gdb/gdbserver/ChangeLog 2019-08-15 Tom Tromey <tromey@adacore.com> * tracepoint.c (write_inferior_data_pointer) (write_inferior_integer, write_inferior_int8) (write_inferior_uinteger, m_tracepoint_action_download) (r_tracepoint_action_download, x_tracepoint_action_download) (l_tracepoint_action_download, clear_inferior_trace_buffer) (download_agent_expr, download_tracepoint_1) (download_trace_state_variables, upload_fast_traceframes): Update. * server.c (gdb_write_memory): Update. * remote-utils.c (relocate_instruction): Update. * proc-service.c (ps_pdwrite): Update. * mem-break.c (remove_memory_breakpoint) (delete_fast_tracepoint_jump, set_fast_tracepoint_jump) (uninsert_fast_tracepoint_jumps_at) (reinsert_fast_tracepoint_jumps_at): Update. * linux-x86-low.c (append_insns) (i386_install_fast_tracepoint_jump_pad) (amd64_write_goto_address, i386_write_goto_address): Update. * linux-s390-low.c (append_insns, s390_write_goto_address): Update. * linux-ppc-low.c (ppc_relocate_instruction) (ppc_install_fast_tracepoint_jump_pad, emit_insns) (ppc_write_goto_address): Update. * linux-aarch64-low.c (append_insns): Update. * target.h (struct target_ops): Update. (write_inferior_memory): Don't declare. * target.c (target_write_memory): Rename from write_inferior_memory. Remove old target_write_memory. |
|
Tom Tromey | c6778d00df |
Simplify write_inferior_memory
gdbserver's write_inferior_memory uses a static variable to avoid memory leaks, and has a comment referring to the lack of cleanups. This patch removes this comment and the code in favor of a straightforward use of std::vector. gdb/gdbserver/ChangeLog 2019-08-15 Tom Tromey <tromey@adacore.com> * target.c (write_inferior_memory): Use std::vector. |
|
Frank Ch. Eigler | 404f29021a |
[PR build/24886] disable glibc mcheck support
This patch drops gdb's configury support for glibc's mcheck function. It has been observed to cause false abort()s, because it is thread-unsafe yet interposes every malloc/free operation. So if any library transitively used by gdb also uses threads, then these functions can easily corrupt their own checking data. These days, gcc ASAN and valgrind provide high quality checking, and mcheck is apparently itself being slowly deprecated. So, let's stop linking to it. Attached patch drops the autoconf/Makefile machinery for both gdb and gdbserver. No testsuite-visible impact. IMHO not worth mentioning in NEWS. See also: https://sourceware.org/bugzilla/show_bug.cgi?id=9939 gdb/ChangeLog PR build/24886 * configure.ac: Drop enable-libmcheck support. * configure, config.in: Rebuild. * libmcheck.m4: Remove. * acinclude.m4: Don't include it. * Makefile.in: Don't distribute it. * top.c (print_gdb_configuration): Don't mention it. gdb/gdbserver/ChangeLog PR build/24886 * configure.ac: Drop enable-libmcheck support. * configure, config.in: Rebuild. * acinclude.m4: Don't include it. |
|
Alan Hayward | 4c5aa8e0b1 |
Arm: Remove unused feature files and tests
Remove the xml tests. Now that it has been proven the new descriptions are identical, there is no need to keep testing that. Also, it would prevent the old xml files from being removed. Remove the old xml files from gdbserver and delete them. gdb/ChangeLog: * arm-tdep.c (_initialize_arm_tdep): Remove xml tests. * features/arm/arm-with-iwmmxt.c: Remove. * features/arm/arm-with-iwmmxt.xml: Remove. * features/arm/arm-with-m-fpa-layout.c: Remove. * features/arm/arm-with-m-fpa-layout.xml: Remove. * features/arm/arm-with-m-vfp-d16.c: Remove. * features/arm/arm-with-m-vfp-d16.xml: Remove. * features/arm/arm-with-m.c: Remove. * features/arm/arm-with-m.xml: Remove. * features/arm/arm-with-neon.c: Remove. * features/arm/arm-with-neon.xml: Remove. * features/arm/arm-with-vfpv2.c: Remove. * features/arm/arm-with-vfpv2.xml: Remove. * features/arm/arm-with-vfpv3.c: Remove. * features/arm/arm-with-vfpv3.xml: Remove. gdb/gdbserver/ChangeLog: 2019-07-05 Alan Hayward <alan.hayward@arm.com> * configure.srv: Remove Arm xml files. |
|
Alan Hayward | 7cc1743302 |
Arm: Use read_description funcs in gdbserver
Switch gdbserver over to using feature target descriptions. Add a function for determining the type of a given target description, and use where required. gdb/gdbserver/ChangeLog: * configure.srv: Add new files. Remove xml generated files. * linux-aarch32-low.c (initialize_low_arch_aarch32): Don't init registers. * linux-aarch32-low.h (tdesc_arm_with_neon): Remove. * linux-aarch32-tdesc.c: New file. * linux-aarch32-tdesc.h: New file. * linux-aarch64-low.c (aarch64_arch_setup): Call aarch32_linux_read_description. * linux-arm-low.c (init_registers_arm, tdesc_arm) (init_registers_arm_with_iwmmxt, tdesc_arm_with_iwmmxt) (init_registers_arm_with_vfpv2, tdesc_arm_with_vfpv2) (init_registers_arm_with_vfpv3, tdesc_arm_with_vfpv3): Remove. (arm_fill_wmmxregset, arm_store_wmmxregset, arm_fill_vfpregset) (arm_store_vfpregset): Call arm_linux_get_tdesc_fp_type. (arm_read_description): Call arm_linux_read_description. (initialize_low_arch): Don't init registers. * linux-arm-tdesc.c: New file. * linux-arm-tdesc.h: New file. |
|
Alan Hayward | 166a82be89 |
Arm: Minor style cleanups
*When reading a target description, do the ptrace check before picking the target description. *In wmmxregset functions, declare the counter inside the for. *Call arm_linux_init_hwbp_cap from in arm_arch_setup - it doesn't belong in arm_read_description. gdb/ChangeLog: * arm-linux-nat.c (arm_linux_nat_target::read_description): Check ptrace earlier, gdb/gdbserver/ChangeLog: * linux-arm-low.c (arm_fill_wmmxregset, arm_store_wmmxregset): Move counter inside for. (arm_read_description): Check ptrace earlier. (arm_arch_setup): Call arm_linux_init_hwbp_cap here. |
|
Tom Tromey | 268a13a5a3 |
Rename common to gdbsupport
This is the next patch in the ongoing series to move gdbsever to the top level. This patch just renames the "common" directory. The idea is to do this move in two parts: first rename the directory (this patch), then move the directory to the top. This approach makes the patches a bit more tractable. I chose the name "gdbsupport" for the directory. However, as this patch was largely written by sed, we could pick a new name without too much difficulty. Tested by the buildbot. gdb/ChangeLog 2019-07-09 Tom Tromey <tom@tromey.com> * contrib/ari/gdb_ari.sh: Change common to gdbsupport. * configure: Rebuild. * configure.ac: Change common to gdbsupport. * gdbsupport: Rename from common. * acinclude.m4: Change common to gdbsupport. * Makefile.in (CONFIG_SRC_SUBDIR, COMMON_SFILES) (HFILES_NO_SRCDIR, stamp-version, ALLDEPFILES): Change common to gdbsupport. * aarch64-tdep.c, ada-lang.c, ada-lang.h, agent.c, alloc.c, amd64-darwin-tdep.c, amd64-dicos-tdep.c, amd64-fbsd-nat.c, amd64-fbsd-tdep.c, amd64-linux-nat.c, amd64-linux-tdep.c, amd64-nbsd-tdep.c, amd64-obsd-tdep.c, amd64-sol2-tdep.c, amd64-tdep.c, amd64-windows-tdep.c, arch-utils.c, arch/aarch64-insn.c, arch/aarch64.c, arch/aarch64.h, arch/amd64.c, arch/amd64.h, arch/arm-get-next-pcs.c, arch/arm-linux.c, arch/arm.c, arch/i386.c, arch/i386.h, arch/ppc-linux-common.c, arch/riscv.c, arch/riscv.h, arch/tic6x.c, arm-tdep.c, auto-load.c, auxv.c, ax-gdb.c, ax-general.c, ax.h, breakpoint.c, breakpoint.h, btrace.c, btrace.h, build-id.c, build-id.h, c-lang.h, charset.c, charset.h, cli/cli-cmds.c, cli/cli-cmds.h, cli/cli-decode.c, cli/cli-dump.c, cli/cli-option.h, cli/cli-script.c, coff-pe-read.c, command.h, compile/compile-c-support.c, compile/compile-c.h, compile/compile-cplus-symbols.c, compile/compile-cplus-types.c, compile/compile-cplus.h, compile/compile-loc2c.c, compile/compile.c, completer.c, completer.h, contrib/ari/gdb_ari.sh, corefile.c, corelow.c, cp-support.c, cp-support.h, cp-valprint.c, csky-tdep.c, ctf.c, darwin-nat.c, debug.c, defs.h, disasm-selftests.c, disasm.c, disasm.h, dtrace-probe.c, dwarf-index-cache.c, dwarf-index-cache.h, dwarf-index-write.c, dwarf2-frame.c, dwarf2expr.c, dwarf2loc.c, dwarf2read.c, event-loop.c, event-top.c, exceptions.c, exec.c, extension.h, fbsd-nat.c, features/aarch64-core.c, features/aarch64-fpu.c, features/aarch64-pauth.c, features/aarch64-sve.c, features/i386/32bit-avx.c, features/i386/32bit-avx512.c, features/i386/32bit-core.c, features/i386/32bit-linux.c, features/i386/32bit-mpx.c, features/i386/32bit-pkeys.c, features/i386/32bit-segments.c, features/i386/32bit-sse.c, features/i386/64bit-avx.c, features/i386/64bit-avx512.c, features/i386/64bit-core.c, features/i386/64bit-linux.c, features/i386/64bit-mpx.c, features/i386/64bit-pkeys.c, features/i386/64bit-segments.c, features/i386/64bit-sse.c, features/i386/x32-core.c, features/riscv/32bit-cpu.c, features/riscv/32bit-csr.c, features/riscv/32bit-fpu.c, features/riscv/64bit-cpu.c, features/riscv/64bit-csr.c, features/riscv/64bit-fpu.c, features/tic6x-c6xp.c, features/tic6x-core.c, features/tic6x-gp.c, filename-seen-cache.h, findcmd.c, findvar.c, fork-child.c, gcore.c, gdb_bfd.c, gdb_bfd.h, gdb_proc_service.h, gdb_regex.c, gdb_select.h, gdb_usleep.c, gdbarch-selftests.c, gdbthread.h, gdbtypes.h, gnu-nat.c, go32-nat.c, guile/guile.c, guile/scm-ports.c, guile/scm-safe-call.c, guile/scm-type.c, i386-fbsd-nat.c, i386-fbsd-tdep.c, i386-go32-tdep.c, i386-linux-nat.c, i386-linux-tdep.c, i386-tdep.c, i387-tdep.c, ia64-libunwind-tdep.c, ia64-linux-nat.c, inf-child.c, inf-ptrace.c, infcall.c, infcall.h, infcmd.c, inferior-iter.h, inferior.c, inferior.h, inflow.c, inflow.h, infrun.c, infrun.h, inline-frame.c, language.h, linespec.c, linux-fork.c, linux-nat.c, linux-tdep.c, linux-thread-db.c, location.c, machoread.c, macrotab.h, main.c, maint.c, maint.h, memattr.c, memrange.h, mi/mi-cmd-break.h, mi/mi-cmd-env.c, mi/mi-cmd-stack.c, mi/mi-cmd-var.c, mi/mi-interp.c, mi/mi-main.c, mi/mi-parse.h, minsyms.c, mips-linux-tdep.c, namespace.h, nat/aarch64-linux-hw-point.c, nat/aarch64-linux-hw-point.h, nat/aarch64-linux.c, nat/aarch64-sve-linux-ptrace.c, nat/amd64-linux-siginfo.c, nat/fork-inferior.c, nat/linux-btrace.c, nat/linux-btrace.h, nat/linux-namespaces.c, nat/linux-nat.h, nat/linux-osdata.c, nat/linux-personality.c, nat/linux-procfs.c, nat/linux-ptrace.c, nat/linux-ptrace.h, nat/linux-waitpid.c, nat/mips-linux-watch.c, nat/mips-linux-watch.h, nat/ppc-linux.c, nat/x86-dregs.c, nat/x86-dregs.h, nat/x86-linux-dregs.c, nat/x86-linux.c, nto-procfs.c, nto-tdep.c, objfile-flags.h, objfiles.c, objfiles.h, obsd-nat.c, observable.h, osdata.c, p-valprint.c, parse.c, parser-defs.h, ppc-linux-nat.c, printcmd.c, probe.c, proc-api.c, procfs.c, producer.c, progspace.h, psymtab.h, python/py-framefilter.c, python/py-inferior.c, python/py-ref.h, python/py-type.c, python/python.c, record-btrace.c, record-full.c, record.c, record.h, regcache-dump.c, regcache.c, regcache.h, remote-fileio.c, remote-fileio.h, remote-sim.c, remote.c, riscv-tdep.c, rs6000-aix-tdep.c, rust-exp.y, s12z-tdep.c, selftest-arch.c, ser-base.c, ser-event.c, ser-pipe.c, ser-tcp.c, ser-unix.c, skip.c, solib-aix.c, solib-target.c, solib.c, source-cache.c, source.c, source.h, sparc-nat.c, spu-linux-nat.c, stack.c, stap-probe.c, symfile-add-flags.h, symfile.c, symfile.h, symtab.c, symtab.h, target-descriptions.c, target-descriptions.h, target-memory.c, target.c, target.h, target/waitstatus.c, target/waitstatus.h, thread-iter.h, thread.c, tilegx-tdep.c, top.c, top.h, tracefile-tfile.c, tracefile.c, tracepoint.c, tracepoint.h, tui/tui-io.c, ui-file.c, ui-out.h, unittests/array-view-selftests.c, unittests/child-path-selftests.c, unittests/cli-utils-selftests.c, unittests/common-utils-selftests.c, unittests/copy_bitwise-selftests.c, unittests/environ-selftests.c, unittests/format_pieces-selftests.c, unittests/function-view-selftests.c, unittests/lookup_name_info-selftests.c, unittests/memory-map-selftests.c, unittests/memrange-selftests.c, unittests/mkdir-recursive-selftests.c, unittests/observable-selftests.c, unittests/offset-type-selftests.c, unittests/optional-selftests.c, unittests/parse-connection-spec-selftests.c, unittests/ptid-selftests.c, unittests/rsp-low-selftests.c, unittests/scoped_fd-selftests.c, unittests/scoped_mmap-selftests.c, unittests/scoped_restore-selftests.c, unittests/string_view-selftests.c, unittests/style-selftests.c, unittests/tracepoint-selftests.c, unittests/unpack-selftests.c, unittests/utils-selftests.c, unittests/xml-utils-selftests.c, utils.c, utils.h, valarith.c, valops.c, valprint.c, value.c, value.h, varobj.c, varobj.h, windows-nat.c, x86-linux-nat.c, xml-support.c, xml-support.h, xml-tdesc.h, xstormy16-tdep.c, xtensa-linux-nat.c, dwarf2read.h: Change common to gdbsupport. gdb/gdbserver/ChangeLog 2019-07-09 Tom Tromey <tom@tromey.com> * configure: Rebuild. * configure.ac: Change common to gdbsupport. * acinclude.m4: Change common to gdbsupport. * Makefile.in (SFILES, OBS, GDBREPLAY_OBS, IPA_OBJS) (version-generated.c, gdbsupport/%-ipa.o, gdbsupport/%.o): Change common to gdbsupport. * ax.c, event-loop.c, fork-child.c, gdb_proc_service.h, gdbreplay.c, gdbthread.h, hostio-errno.c, hostio.c, i387-fp.c, inferiors.c, inferiors.h, linux-aarch64-tdesc-selftest.c, linux-amd64-ipa.c, linux-i386-ipa.c, linux-low.c, linux-tic6x-low.c, linux-x86-low.c, linux-x86-tdesc-selftest.c, linux-x86-tdesc.c, lynx-i386-low.c, lynx-low.c, mem-break.h, nto-x86-low.c, regcache.c, regcache.h, remote-utils.c, server.c, server.h, spu-low.c, symbol.c, target.h, tdesc.c, tdesc.h, thread-db.c, tracepoint.c, win32-i386-low.c, win32-low.c: Change common to gdbsupport. |
|
Alan Hayward | 350fab5416 |
Arm/AArch64: Use a single set of Arm register set size defines
Both targets were using a mixture of defines and hardcoded values. Add a standard set in arch/arm.h and use throughout, ensuring that none of the existing sizes change. No functionality changes. gdb/ChangeLog: * aarch32-linux-nat.h (VFP_REGS_SIZE): Remove define. * aarch64-linux-nat.c (fetch_fpregs_from_thread) (store_fpregs_to_thread) (aarch64_linux_nat_target::read_description): Use ARM_VFP3_REGS_SIZE. * arch/arm.h (IWMMXT_VEC_REGISTER_SIZE, ARM_CORE_REGS_SIZE) (ARM_FP_REGS_SIZE, ARM_VFP2_REGS_SIZE, ARM_VFP3_REGS_SIZE) (IWMMXT_REGS_SIZE): Add define. * arm-linux-nat.c (IWMMXT_REGS_SIZE): Remove define. (fetch_vfp_regs, store_vfp_regs) (arm_linux_nat_target::read_description): Use ARM_VFP3_REGS_SIZE. * arm-tdep.c (arm_register_g_packet_guesses): Use new defines. gdb/gdbserver/ChangeLog: * linux-aarch32-low.c (arm_read_description, arm_regsets): Use new defines. * linux-arm-low.c (arm_read_description, arm_regsets): Likewise. |
|
Alan Hayward | 2b40fda74b |
i386/AArch64: Remove old xml tests
Both the i386, X86_64 and AArch64 builds of gdbserver include a bunch of legacy xml files, dat files and auto generated C files, when building for unit test. These tests exists back from when feature target descriptions were added to prove that the new target descriptions were identical to the original older versions. The old files are not used for anything other than these tests. Now that this has been proven, we are not gaining anything by keeping the original files and tests. Should new functionality be added, it would break the tests, unless the functionality was backported to the xml. There is no requirement that we must match the exact xml from N releases ago. It adds obfuscation, where as the feature target descriptions were meant to simplify the code. In addition, there are a bunch of xml and dat files which are completely unused. This patch removes the selftests and the target descriptions from gdbserver. Update the unittest to allow 0 tests (note, this failed on other targets that never had any tests). gdb/ChangeLog: * aarch64-tdep.c: Remove xml self tests. * amd64-linux-tdep.c: Likewise. * amd64-tdep.c: Likewise. * i386-linux-tdep.c: Likewise. * i386-tdep.c: Likewise. gdb/gdbserver/ChangeLog: * configure.srv: Remove legacy xml. * linux-aarch64-low.c (initialize_low_arch): Remove initialize_low_tdesc call. * linux-aarch64-tdesc-selftest.c: Remove file. * linux-aarch64-tdesc.h (initialize_low_tdesc): Remove. * linux-x86-low.c (initialize_low_arch): Remove initialize_low_tdesc call. * linux-x86-tdesc-selftest.c: Remove file. * linux-x86-tdesc.h (initialize_low_tdesc): Remove. gdb/testsuite/ChangeLog: * gdb.server/unittest.exp: Allow 0 unit tests to run. |
|
Tom de Vries | 7d10623d3b |
[gdbserver] Fix s390x -m31 gdbserver build
When building gdb on s390x with -m31, we run into this error:
...
gdb/gdbserver/linux-s390-ipa.c: \
In function 'const target_desc* get_ipa_tdesc(int)':
gdb/gdbserver/linux-s390-ipa.c:371:18: error: 's390_te_ft_collect_regmap' \
was not declared in this scope
SET_REGMAP(s390_te_ft_collect_regmap, 0);
The offending line is part of this code snippet:
...
case S390_TDESC_GS:
SET_REGMAP(s390_te_ft_collect_regmap, 0);
return tdesc_s390_gs_linux64;
...
introduced in commit
|
|
Tom de Vries | 8d6a48df54 |
[gdb] Fix clang buildbreaker
Building gdb with clang, I run into:
...
src/gdb/gdbserver/linux-low.c:6190:41: error: comparison of unsigned \
expression < 0 is always false [-Werror,-Wtautological-compare]
if (debug_write ("sigchld_handler\n",
sizeof ("sigchld_handler\n") - 1) < 0)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ^ ~
...
This regression is introduced by commit
|
|
Simon Marchi | e79be6e5f3 | Fix some whitespace issues in gdb ChangeLogs | |
Tom Tromey | 73cc72729a |
Move gnulib to top level
This patch moves the gdb/gnulib subdirectory to the top level. It adjusts the top-level build system to build gnulib when necessary, and changes gdb to use this. However, gdbserver still builds its own copy of gnulib, just from the new source location. A small hack was needed to ensure that gnulib is only built when gdb is enabled. The Makefile only provides an ordering -- the directory must be mentioned in configdirs to actually be compiled at all. Most of the patch is just a "git mv" of gnulib, though a few minor path adjustments were needed in some files there. Tested by the buildbot. ChangeLog 2019-06-14 Tom Tromey <tom@tromey.com> * MAINTAINERS: Add gnulib. * gnulib: New directory, move from gdb/gnulib. * configure.ac (host_libs): Add gnulib. * configure: Rebuild. * Makefile.def (host_modules, dependencies): Add gnulib. * Makefile.in: Rebuild. gdb/ChangeLog 2019-06-14 Tom Tromey <tom@tromey.com> * gnulib: Move directory to top-level. * configure.ac: Don't configure gnulib. * configure: Rebuild. * common/common-defs.h: Use new path to gnulib. * Makefile.in (GNULIB_BUILDDIR): Now ../gnulib. (GNULIB_H): Remove. (INCGNU): Look in new gnulib location. (HFILES_NO_SRCDIR): Remove gnulib files. (SUBDIR, REQUIRED_SUBDIRS): Remove gnulib. (generated_files): Remove GNULIB_H. ($(LIBGNU), all-lib): Remove targets. (distclean): Don't mention GNULIB_BUILDDIR. ($(GNULIB_BUILDDIR)/Makefile): Remove target. gdb/gdbserver/ChangeLog 2019-06-14 Tom Tromey <tom@tromey.com> * configure.ac: Use new path to gnulib. * configure: Rebuild. * Makefile.in (INCGNU, $(GNULIB_BUILDDIR)/Makefile): Use new path to gnulib. gnulib/ChangeLog 2019-06-14 Tom Tromey <tom@tromey.com> * update-gnulib.sh: Adjust paths. * Makefile.in: Adjust paths. * configure.ac: Adjust paths. Use ACX_LARGEFILE. * configure: Rebuild. |
|
Tom Tromey | 08f10e02be |
Move gdb's xmalloc and friends to new file
When "common" becomes a library, linking will cause a symbol clash, because "xmalloc" and some related symbols are defined in that library, libiberty, and readline. To work around this problem, this patch moves the clashing symbols to a new file, which is then compiled separately for both gdb and gdbserver. gdb/ChangeLog 2019-06-11 Tom Tromey <tom@tromey.com> * common/common-utils.c (xmalloc, xrealloc, xcalloc) (xmalloc_failed): Move to alloc.c. * alloc.c: New file. * Makefile.in (COMMON_SFILES): Add alloc.c. gdb/gdbserver/ChangeLog 2019-06-11 Tom Tromey <tom@tromey.com> * Makefile.in (SFILES): Add alloc.c. (OBS): Add alloc.o. (IPA_OBJS): Add alloc-ipa.o. (alloc-ipa.o): New target. (%.o: ../%.c): New pattern rule. |
|
Tom Tromey | 422186a95c |
Remove newlines from warnings
ARI pointed out that a recent patch introduced a call to "warning" with a string that ended in a newline: https://sourceware.org/ml/gdb-patches/2019-06/msg00000.html This is generally forbidden, I believe, because warning adds its own newline. This patch removes all of the trailing newlines I was able to find. I searched for 'warning (.*\\n"' and then fixed the ones where the newline appeared at the end of the string (some had internal newlines). Tested on x86-64 Fedora 29. gdb/ChangeLog 2019-06-10 Tom Tromey <tromey@adacore.com> * m32c-tdep.c (m32c_m16c_address_to_pointer): Don't end warning with a newline. * guile/guile.c (handle_boot_error): Don't end warning with a newline. * cli/cli-cmds.c (exit_status_set_internal_vars): Don't end warning with a newline. * s12z-tdep.c (s12z_skip_prologue): Don't end warning with a newline. (s12z_frame_cache): Likewise. * dwarf-index-cache.c (index_cache::store): Don't end warning with a newline. * solib-svr4.c (disable_probes_interface): Don't end warning with a newline. * nat/fork-inferior.c (fork_inferior): Don't end warning with a newline. * python/python.c (do_finish_initialization): Don't end warning with a newline. gdb/gdbserver/ChangeLog 2019-06-10 Tom Tromey <tromey@adacore.com> * remote-utils.c (look_up_one_symbol, relocate_instruction): Don't end warning with a newline. * linux-s390-low.c (s390_get_wordsize): Don't end warning with a newline. * thread-db.c (attach_thread): Don't end warning with a newline. (thread_db_notice_clone): Likewise. * tracepoint.c (gdb_agent_helper_thread): Don't end warning with a newline. * linux-x86-low.c (x86_get_min_fast_tracepoint_insn_len): Don't end warning with a newline. |
|
Pedro Alves | b02f78f928 |
Introduce and use make_unique_xstrdup
Adds an utility function to make it shorter to write the common case of wrapping an xstrdup with a unique_xmalloc_ptr, and uses it throughout. Note: I tried to put this in common/common-utils.h near skip_spaces, etc. but that is included in common/common-defs.h before common/gdb_unique_ptr.h is included, so it would fail to compile because gdb::unique_xmalloc_ptr isn't defined at that point yet. I tried moving the gdb_unique_ptr.h inclusion before common-utils.h, but that doesn't work because gdb_unique_ptr.h depends on common-utils.h for xfree. gdb/ChangeLog: 2019-06-04 Pedro Alves <palves@redhat.com> * common/gdb_unique_ptr.h (make_unique_xstrdup): New. * ada-lang.c (catch_ada_completer): Use make_unique_xstrdup. * breakpoint.c (condition_completer): Likewise. * cli/cli-dump.c (scan_expression): Likewise. * common/filestuff.c (mkdir_recursive): Likewise. * common/gdb_tilde_expand.c (gdb_tilde_expand_up) * common/pathstuff.c (gdb_realpath, gdb_realpath_keepfile) (gdb_abspath): Likewise. * compile/compile-cplus-types.c (compile_cplus_instance::decl_name): Likewise. * completer.c (complete_explicit_location): (signal_completer, reg_or_group_completer_1): Likewise. * cp-support.c (cp_remove_params_if_any): Likewise. * fbsd-tdep.c (fbsd_core_vnode_path): Likewise. * guile/scm-safe-call.c (gdbscm_safe_eval_string): Likewise. * infcmd.c (strip_bg_char): Likewise. * linespec.c (copy_token_string): Likewise. * mi/mi-main.c (output_cores): Likewise. * psymtab.c (psymtab_search_name): * symfile.c (test_set_ext_lang_command): Likewise. * target.c (target_fileio_read_stralloc): Likewise. * tui/tui-regs.c (tui_reggroup_completer): Likewise. * value.c (complete_internalvar): Likewise. gdb/gdbserver/ChangeLog: 2019-06-04 Pedro Alves <palves@redhat.com> * server.c (captured_main): Use make_unique_xstrdup. |
|
Tom Tromey | 88ed7edbc6 |
Remove fromhex implementation from gdbreplay
gdbreplay had its own implementation of fromhex. This patch changes it to use the one in common/. gdb/gdbserver/ChangeLog 2019-06-02 Tom Tromey <tom@tromey.com> * gdbreplay.c (fromhex): Remove. * Makefile.in (GDBREPLAY_OBS): Add rsp-low.o. |
|
Tom Tromey | 33a6bc350f |
Add new GCC 9 warnings to warnings.m4
GCC 9 has a few new warnings that aren't enabled in the gdb build by default: -Wdeprecated-copy, -Wdeprecated-copy-dtor, and -Wredundant-move. This patch enables them all. Tested by rebuilding with a new GCC (git master) on x86-64 Fedora 29. gdb/ChangeLog 2019-05-29 Tom Tromey <tromey@adacore.com> * inflow.c (struct terminal_info): Add default operator=. * configure: Rebuild. * warning.m4 (AM_GDB_WARNINGS): Add -Wdeprecated-copy, -Wdeprecated-copy-dtor, -Wredundant-move. gdb/gdbserver/ChangeLog 2019-05-29 Tom Tromey <tromey@adacore.com> * configure: Rebuild. |
|
Kevin Buettner | e90a813d96 |
Fix regression caused by recently added syscall restart code
This line of code... *(int64_t *) ptr = *(int32_t *) ptr; ...in linux-x86-low.c is not needed (and does not work correctly) within a 32-bit executable. I added an __x86_64__ ifdef (which is used extensively elsewhere in the file for like purposes) to prevent this code from being included in 32-bit builds. It fixes the following regressions when running on native i686-pc-linux-gnu: FAIL: gdb.server/abspath.exp: continue to main FAIL: gdb.server/connect-without-multi-process.exp: multiprocess=auto: continue to main FAIL: gdb.server/connect-without-multi-process.exp: multiprocess=off: continue to main FAIL: gdb.server/ext-restart.exp: restart: run to main FAIL: gdb.server/ext-restart.exp: run to main FAIL: gdb.server/ext-run.exp: continue to main FAIL: gdb.server/ext-wrapper.exp: print d FAIL: gdb.server/ext-wrapper.exp: restart: print d FAIL: gdb.server/ext-wrapper.exp: restart: run to marker FAIL: gdb.server/ext-wrapper.exp: run to marker FAIL: gdb.server/no-thread-db.exp: continue to breakpoint: after tls assignment FAIL: gdb.server/reconnect-ctrl-c.exp: first: stop with control-c FAIL: gdb.server/reconnect-ctrl-c.exp: second: stop with control-c FAIL: gdb.server/run-without-local-binary.exp: run test program until the end FAIL: gdb.server/server-kill.exp: continue to breakpoint: after server_pid assignment FAIL: gdb.server/server-kill.exp: tstatus FAIL: gdb.server/server-run.exp: continue to main gdb/gdbserver/ChangeLog: * linux-x86-low.c (x86_fill_gregset): Don't compile 64-bit sign extension code on 32-bit builds. |
|
Eli Zaretskii | 353ea2d106 |
On MS-Windows, define _WIN32_WINNT in a single common place.
This changeset defines _WIN32_WINNT to at least 0x0501, the level of Windows XP, unless defined to a higher level, in a single place. It then removes all the overrides of _WIN32_WINNT in individual files as no longer needed. Doing this also solves compilation of windows-nat.c with mingw.org's MinGW, as that file uses CONSOLE_FONT_INFO which needs the XP level to become exposed in the Windows headers, while mingw.org defaults to Windows 9X. gdb/ChangeLog: 2019-05-03 Eli Zaretskii <eliz@gnu.org> * common/common-defs.h [__MINGW32__ || __CYGWIN__]: Define _WIN32_WINNT to the XP level, unless already defined to a higher level. * unittests/parse-connection-spec-selftests.c: * ser-tcp.c: * common/netstuff.c [USE_WIN32API]: Remove the _WIN32_WINNT override. gdb/gdbserver/ChangeLog: 2019-05-03 Eli Zaretskii <eliz@gnu.org> * remote-utils.c: * gdbreplay.c [USE_WIN32API]: Remove the _WIN32_WINNT override. |
|
Tom Tromey | b494cdff69 |
Use std::list for event notifications in gdbserver
This changes gdbserver to use std::list rather than common/queue.h for event notifications. gdb/gdbserver/ChangeLog 2019-04-19 Tom Tromey <tom@tromey.com> * server.c (struct vstop_notif): Derive from notif_event. <base>: Remove. (queue_stop_reply): Update. (remove_all_on_match_ptid): Change type. Rewrite. (discard_queued_stop_replies): Rewrite. (in_queued_stop_replies_ptid): Change type. (in_queued_stop_replies): Rewrite. (notif_stop): Update. (queue_stop_reply_callback): Update. (captured_main): Don't call initialize_notif. (push_stop_notification): Update. * notif.c (notif_write_event, handle_notif_ack) (notif_event_enque, notif_push): Update. (notif_event_xfree, initialize_notif): Remove. * notif.h (struct notif_event): Include <list>, not "common/queue.h". (struct notif_server) <queue>: Now a std::list. (notif_event_p): Remove typedef. (initialize_notif): Don't declare. (struct notif_event): Add virtual destructor. |
|
Alan Hayward | a7e559cc08 |
gdbserver: Ensure all debug output uses debug functions
All debug output needs to go via debug functions to ensure it writes to the correct output stream. gdb/ChangeLog: * nat/linux-waitpid.c (linux_debug): Call debug_vprintf. gdb/gdbserver/ChangeLog: * ax.c (ax_vdebug): Call debug_printf. * debug.c (debug_write): New function. * debug.h (debug_write): New declaration. * linux-low.c (sigchld_handler): Call debug_write. |
|
Alan Hayward | aeb2e706e1 |
gdbserver: Add debug-file option
Add command line option to send all debug output to a given file. Always default back to stderr. Add matching monitor command. Add documentation. gdb/doc/ChangeLog: * gdb.texinfo (Other Command-Line Arguments for gdbserver): Add debug-file option. (Monitor Commands for gdbserver): Likewise. (gdbserver man): Likewise. gdb/gdbserver/ChangeLog: * debug.c (debug_set_output): New function. (debug_vprintf): Send output to debug_file. (debug_flush): Likewise. * debug.h (debug_set_output): New declaration. * server.c (handle_monitor_command): Add debug-file option. (captured_main): Likewise. |
|
Alan Hayward | c1bc0935a4 |
gdbserver: Move remote_debug to a single place
A comment in debug.h (written in 2014) states: "We declare debug format variables here, and debug_threads but no other debug content variables (e.g., not remote_debug) because while this file is not currently used by IPA it may be some day, and IPA may have its own set of debug content variables". This has resulted in remote_debug being declared in many .c/.h files throughout gdbserver. It would be much simplier to define it one place. The most logical place to define it is in debug.h, surrounded by #define guards. If IPA is changed, then at that point the variable can be moved elsewhere. gdb/gdbserver/ChangeLog: * debug.c (remote_debug): Add definition. * debug.h (remote_debug): Add declaration. * hostio.c (remote_debug): Remove declaration. * remote-utils.c (struct ui_file): Likewise. (remote_debug): Likewise. * remote-utils.h (remote_debug): Likewise, * server.c (remote_debug): Remove definition. |
|
Kevin Buettner | 3f52fdbcb5 |
Fix amd64->i386 linux syscall restart problem
This commit fixes some failures in gdb.base/interrupt.exp when debugging a 32-bit i386 linux inferior from an amd64 host. When running the following test... make check RUNTESTFLAGS="--target_board unix/-m32 interrupt.exp" ... without this commit, I see the following output: FAIL: gdb.base/interrupt.exp: continue (the program exited) FAIL: gdb.base/interrupt.exp: echo data FAIL: gdb.base/interrupt.exp: Send Control-C, second time FAIL: gdb.base/interrupt.exp: signal SIGINT (the program is no longer running) ERROR: Undefined command "". ERROR: GDB process no longer exists === gdb Summary === When the test is run with this commit in place, we see 12 passes instead. This is the desired behavior. Analysis: On Linux, when a syscall is interrupted by a signal, the syscall may return -ERESTARTSYS when a signal occurs. Doing so indicates that the syscall is restartable. Then, depending on settings associated with the signal handler, and after the signal handler is called, the kernel can then either return -EINTR or can cause the syscall to be restarted. In this discussion, we are concerned with the latter case. On i386, the kernel returns this status via the EAX register. When debugging a 32-bit (i386) process from a 64-bit (amd64) GDB, the debugger fetches 64-bit registers even though the process being debugged is 32-bit. Since we're debugging a 32-bit target, only 32 bits are being saved in the register cache. Now, ideally, GDB would save all 64-bits in the regcache and then would be able to restore those same values when it comes time to continue the target. I've looked into doing this, but it's not easy and I don't see many benefits to doing so. One benefit, however, would be that EAX would appear as a negative value for doing syscall restarts. At the moment, GDB is setting the high 32 bits of RAX (and other registers too) to 0. So, when GDB restores EAX just prior to a syscall restart, the high 32 bits of RAX are zeroed, thus making it look like a positive value. For this particular purpose, we need to sign extend EAX so that RAX will appear as a negative value when EAX is set to -ERESTARTSYS. This in turn will cause the signal handling code in the kernel to recognize -ERESTARTSYS which will in turn cause the syscall to be restarted. This commit is based on work by Jan Kratochvil from 2009: https://sourceware.org/ml/gdb-patches/2009-11/msg00592.html Jan's patch had the sign extension code in amd64-nat.c. Several other native targets make use of this code, so it seemed better to move the sign extension code to a linux specific file. I also added similar code to gdbserver. Another approach is to fix the problem in the kernel. Hui Zhu tried to get a fix into the kernel back in 2014, but it was not accepted. Discussion regarding this approach may be found here: https://lore.kernel.org/patchwork/patch/457841/ Even if a fix were to be put into the kernel, we'd still need some kind of fix in GDB in order to support older kernels. Finally, I'll note that Fedora has been carrying a similar patch for at least nine years. Other distributions, including RHEL and CentOS have picked up this change and have been using it too. gdb/ChangeLog: * amd64-linux-nat.c (amd64_linux_collect_native_gregset): New function. (fill_gregset): Call amd64_linux_collect_native_gregset instead of amd64_collect_native_gregset. (amd64_linux_nat_target::store_registers): Likewise. gdb/gdbserver/ChangeLog: * linux-x86-low.c (x86_fill_gregset): Sign extend EAX value when using a 64-bit gdbserver. |
|
Tom Tromey | b0319eaaf9 |
Use find_thread_in_random in select_event_lwp
I noticed that find_thread_in_random duplicates the code in find_thread_in_random, so this patch changes the latter to use the former. There are two other spots in gdb that do this, but to unify all of them would require switching some code from using the "iterate over" idiom to using iterators. Another possible improvement is that find_thread_in_random could be made single-pass using reservoir sampling. Tested by the buildbot. gdb/gdbserver/ChangeLog 2019-04-09 Tom Tromey <tromey@adacore.com> * linux-low.c (select_event_lwp): Use find_thread_in_random. |
|
Tom Tromey | eedc3f4f0a |
Replace throw_exception with throw in some cases
This replaces throw_exception with "throw;" when possible. This was written by script. The rule that is followed is that uses of the form: catch (... &name) { ... throw_exception (name); } ... can be rewritten. This should always be safe, because exceptions are caught by const reference, and therefore can't be modified in the body of the catch. gdb/ChangeLog 2019-04-08 Tom Tromey <tom@tromey.com> * valops.c (value_rtti_indirect_type): Replace throw_exception with throw. * tracefile-tfile.c (tfile_target_open): Replace throw_exception with throw. * thread.c (thr_try_catch_cmd): Replace throw_exception with throw. * target.c (target_translate_tls_address): Replace throw_exception with throw. * stack.c (frame_apply_command_count): Replace throw_exception with throw. * solib-spu.c (append_ocl_sos): Replace throw_exception with throw. * s390-tdep.c (s390_frame_unwind_cache): Replace throw_exception with throw. * rs6000-tdep.c (rs6000_frame_cache) (rs6000_epilogue_frame_cache): Replace throw_exception with throw. * remote.c: Replace throw_exception with throw. * record-full.c (record_full_message, record_full_wait_1) (record_full_restore): Replace throw_exception with throw. * record-btrace.c: (get_thread_current_frame_id, record_btrace_start_replaying) (cmd_record_btrace_bts_start, cmd_record_btrace_pt_start) (cmd_record_btrace_start): Replace throw_exception with throw. * parse.c (parse_exp_in_context_1): Replace throw_exception with throw. * linux-nat.c (detach_one_lwp, linux_resume_one_lwp) (resume_stopped_resumed_lwps): Replace throw_exception with throw. * linespec.c: (find_linespec_symbols): Replace throw_exception with throw. * infrun.c (displaced_step_prepare, resume): Replace throw_exception with throw. * infcmd.c (post_create_inferior): Replace throw_exception with throw. * inf-loop.c (inferior_event_handler): Replace throw_exception with throw. * i386-tdep.c (i386_frame_cache, i386_epilogue_frame_cache) (i386_sigtramp_frame_cache): Replace throw_exception with throw. * frame.c (frame_unwind_pc, get_prev_frame_if_no_cycle) (get_prev_frame_always, get_frame_pc_if_available) (get_frame_address_in_block_if_available, get_frame_language): Replace throw_exception with throw. * frame-unwind.c (frame_unwind_try_unwinder): Replace throw_exception with throw. * eval.c (fetch_subexp_value, evaluate_var_value) (evaluate_funcall, evaluate_subexp_standard): Replace throw_exception with throw. * dwarf2loc.c (call_site_find_chain) (dwarf2_evaluate_loc_desc_full, dwarf2_locexpr_baton_eval): Replace throw_exception with throw. * dwarf2-frame.c (dwarf2_frame_cache): Replace throw_exception with throw. * darwin-nat.c (darwin_attach_pid): Replace throw_exception with throw. * cp-abi.c (baseclass_offset): Replace throw_exception with throw. * completer.c (complete_line_internal): Replace throw_exception with throw. * compile/compile-object-run.c (compile_object_run): Replace throw_exception with throw. * cli/cli-script.c (process_next_line): Replace throw_exception with throw. * btrace.c (btrace_compute_ftrace_pt, btrace_compute_ftrace) (btrace_enable, btrace_maint_update_pt_packets): Replace throw_exception with throw. * breakpoint.c (create_breakpoint, save_breakpoints): Replace throw_exception with throw. * break-catch-throw.c (re_set_exception_catchpoint): Replace throw_exception with throw. * amd64-tdep.c (amd64_frame_cache, amd64_sigtramp_frame_cache) (amd64_epilogue_frame_cache): Replace throw_exception with throw. * aarch64-tdep.c (aarch64_make_prologue_cache) (aarch64_make_stub_cache): Replace throw_exception with throw. gdb/gdbserver/ChangeLog 2019-04-08 Tom Tromey <tom@tromey.com> * linux-low.c (linux_detach_one_lwp): Replace throw_exception with throw. (linux_resume_one_lwp): Likewise. |
|
Tom Tromey | 230d2906b9 |
Rename gdb exception types
This renames the gdb exception types. The old types were only needed due to the macros in common-exception.h that are now gone. The intermediate layer of gdb_exception_RETURN_MASK_ALL did not seem needed, so this patch removes it entirely. gdb/ChangeLog 2019-04-08 Tom Tromey <tom@tromey.com> * common/common-exceptions.h (gdb_exception_RETURN_MASK_ALL): Remove. (gdb_exception_error): Rename from gdb_exception_RETURN_MASK_ERROR. (gdb_exception_quit): Rename from gdb_exception_RETURN_MASK_QUIT. (gdb_quit_bad_alloc): Update. * aarch64-tdep.c: Update. * ada-lang.c: Update. * ada-typeprint.c: Update. * ada-valprint.c: Update. * amd64-tdep.c: Update. * arch-utils.c: Update. * break-catch-throw.c: Update. * breakpoint.c: Update. * btrace.c: Update. * c-varobj.c: Update. * cli/cli-cmds.c: Update. * cli/cli-interp.c: Update. * cli/cli-script.c: Update. * common/common-exceptions.c: Update. * common/new-op.c: Update. * common/selftest.c: Update. * compile/compile-c-symbols.c: Update. * compile/compile-cplus-symbols.c: Update. * compile/compile-object-load.c: Update. * compile/compile-object-run.c: Update. * completer.c: Update. * corelow.c: Update. * cp-abi.c: Update. * cp-support.c: Update. * cp-valprint.c: Update. * darwin-nat.c: Update. * disasm-selftests.c: Update. * dtrace-probe.c: Update. * dwarf-index-cache.c: Update. * dwarf-index-write.c: Update. * dwarf2-frame-tailcall.c: Update. * dwarf2-frame.c: Update. * dwarf2loc.c: Update. * dwarf2read.c: Update. * eval.c: Update. * event-loop.c: Update. * event-top.c: Update. * exec.c: Update. * f-valprint.c: Update. * fbsd-tdep.c: Update. * frame-unwind.c: Update. * frame.c: Update. * gdbtypes.c: Update. * gnu-v3-abi.c: Update. * guile/guile-internal.h: Update. * guile/scm-block.c: Update. * guile/scm-breakpoint.c: Update. * guile/scm-cmd.c: Update. * guile/scm-disasm.c: Update. * guile/scm-frame.c: Update. * guile/scm-lazy-string.c: Update. * guile/scm-math.c: Update. * guile/scm-param.c: Update. * guile/scm-ports.c: Update. * guile/scm-pretty-print.c: Update. * guile/scm-symbol.c: Update. * guile/scm-symtab.c: Update. * guile/scm-type.c: Update. * guile/scm-value.c: Update. * i386-linux-tdep.c: Update. * i386-tdep.c: Update. * inf-loop.c: Update. * infcall.c: Update. * infcmd.c: Update. * infrun.c: Update. * jit.c: Update. * language.c: Update. * linespec.c: Update. * linux-fork.c: Update. * linux-nat.c: Update. * linux-tdep.c: Update. * linux-thread-db.c: Update. * main.c: Update. * mi/mi-cmd-break.c: Update. * mi/mi-cmd-stack.c: Update. * mi/mi-interp.c: Update. * mi/mi-main.c: Update. * objc-lang.c: Update. * p-valprint.c: Update. * parse.c: Update. * ppc-linux-tdep.c: Update. * printcmd.c: Update. * python/py-arch.c: Update. * python/py-breakpoint.c: Update. * python/py-cmd.c: Update. * python/py-finishbreakpoint.c: Update. * python/py-frame.c: Update. * python/py-framefilter.c: Update. * python/py-gdb-readline.c: Update. * python/py-inferior.c: Update. * python/py-infthread.c: Update. * python/py-lazy-string.c: Update. * python/py-linetable.c: Update. * python/py-objfile.c: Update. * python/py-param.c: Update. * python/py-prettyprint.c: Update. * python/py-progspace.c: Update. * python/py-record-btrace.c: Update. * python/py-record.c: Update. * python/py-symbol.c: Update. * python/py-type.c: Update. * python/py-unwind.c: Update. * python/py-utils.c: Update. * python/py-value.c: Update. * python/python.c: Update. * record-btrace.c: Update. * record-full.c: Update. * remote-fileio.c: Update. * remote.c: Update. * riscv-tdep.c: Update. * rs6000-aix-tdep.c: Update. * rs6000-tdep.c: Update. * rust-exp.y: Update. * rust-lang.c: Update. * s390-tdep.c: Update. * selftest-arch.c: Update. * solib-dsbt.c: Update. * solib-frv.c: Update. * solib-spu.c: Update. * solib-svr4.c: Update. * solib.c: Update. * sparc64-linux-tdep.c: Update. * stack.c: Update. * symfile-mem.c: Update. * symmisc.c: Update. * target.c: Update. * thread.c: Update. * top.c: Update. * tracefile-tfile.c: Update. * tui/tui.c: Update. * typeprint.c: Update. * unittests/cli-utils-selftests.c: Update. * unittests/parse-connection-spec-selftests.c: Update. * valops.c: Update. * valprint.c: Update. * value.c: Update. * varobj.c: Update. * windows-nat.c: Update. * x86-linux-nat.c: Update. * xml-support.c: Update. gdb/gdbserver/ChangeLog 2019-04-08 Tom Tromey <tom@tromey.com> * gdbreplay.c: Update. * linux-low.c: Update. * server.c: Update. |
|
Tom Tromey | a70b814420 |
Rewrite TRY/CATCH
This rewrites gdb's TRY/CATCH to plain C++ try/catch. The patch was largely written by script, though one change (to a comment in common-exceptions.h) was reverted by hand. gdb/ChangeLog 2019-04-08 Tom Tromey <tom@tromey.com> * xml-support.c: Use C++ exception handling. * x86-linux-nat.c: Use C++ exception handling. * windows-nat.c: Use C++ exception handling. * varobj.c: Use C++ exception handling. * value.c: Use C++ exception handling. * valprint.c: Use C++ exception handling. * valops.c: Use C++ exception handling. * unittests/parse-connection-spec-selftests.c: Use C++ exception handling. * unittests/cli-utils-selftests.c: Use C++ exception handling. * typeprint.c: Use C++ exception handling. * tui/tui.c: Use C++ exception handling. * tracefile-tfile.c: Use C++ exception handling. * top.c: Use C++ exception handling. * thread.c: Use C++ exception handling. * target.c: Use C++ exception handling. * symmisc.c: Use C++ exception handling. * symfile-mem.c: Use C++ exception handling. * stack.c: Use C++ exception handling. * sparc64-linux-tdep.c: Use C++ exception handling. * solib.c: Use C++ exception handling. * solib-svr4.c: Use C++ exception handling. * solib-spu.c: Use C++ exception handling. * solib-frv.c: Use C++ exception handling. * solib-dsbt.c: Use C++ exception handling. * selftest-arch.c: Use C++ exception handling. * s390-tdep.c: Use C++ exception handling. * rust-lang.c: Use C++ exception handling. * rust-exp.y: Use C++ exception handling. * rs6000-tdep.c: Use C++ exception handling. * rs6000-aix-tdep.c: Use C++ exception handling. * riscv-tdep.c: Use C++ exception handling. * remote.c: Use C++ exception handling. * remote-fileio.c: Use C++ exception handling. * record-full.c: Use C++ exception handling. * record-btrace.c: Use C++ exception handling. * python/python.c: Use C++ exception handling. * python/py-value.c: Use C++ exception handling. * python/py-utils.c: Use C++ exception handling. * python/py-unwind.c: Use C++ exception handling. * python/py-type.c: Use C++ exception handling. * python/py-symbol.c: Use C++ exception handling. * python/py-record.c: Use C++ exception handling. * python/py-record-btrace.c: Use C++ exception handling. * python/py-progspace.c: Use C++ exception handling. * python/py-prettyprint.c: Use C++ exception handling. * python/py-param.c: Use C++ exception handling. * python/py-objfile.c: Use C++ exception handling. * python/py-linetable.c: Use C++ exception handling. * python/py-lazy-string.c: Use C++ exception handling. * python/py-infthread.c: Use C++ exception handling. * python/py-inferior.c: Use C++ exception handling. * python/py-gdb-readline.c: Use C++ exception handling. * python/py-framefilter.c: Use C++ exception handling. * python/py-frame.c: Use C++ exception handling. * python/py-finishbreakpoint.c: Use C++ exception handling. * python/py-cmd.c: Use C++ exception handling. * python/py-breakpoint.c: Use C++ exception handling. * python/py-arch.c: Use C++ exception handling. * printcmd.c: Use C++ exception handling. * ppc-linux-tdep.c: Use C++ exception handling. * parse.c: Use C++ exception handling. * p-valprint.c: Use C++ exception handling. * objc-lang.c: Use C++ exception handling. * mi/mi-main.c: Use C++ exception handling. * mi/mi-interp.c: Use C++ exception handling. * mi/mi-cmd-stack.c: Use C++ exception handling. * mi/mi-cmd-break.c: Use C++ exception handling. * main.c: Use C++ exception handling. * linux-thread-db.c: Use C++ exception handling. * linux-tdep.c: Use C++ exception handling. * linux-nat.c: Use C++ exception handling. * linux-fork.c: Use C++ exception handling. * linespec.c: Use C++ exception handling. * language.c: Use C++ exception handling. * jit.c: Use C++ exception handling. * infrun.c: Use C++ exception handling. * infcmd.c: Use C++ exception handling. * infcall.c: Use C++ exception handling. * inf-loop.c: Use C++ exception handling. * i386-tdep.c: Use C++ exception handling. * i386-linux-tdep.c: Use C++ exception handling. * guile/scm-value.c: Use C++ exception handling. * guile/scm-type.c: Use C++ exception handling. * guile/scm-symtab.c: Use C++ exception handling. * guile/scm-symbol.c: Use C++ exception handling. * guile/scm-pretty-print.c: Use C++ exception handling. * guile/scm-ports.c: Use C++ exception handling. * guile/scm-param.c: Use C++ exception handling. * guile/scm-math.c: Use C++ exception handling. * guile/scm-lazy-string.c: Use C++ exception handling. * guile/scm-frame.c: Use C++ exception handling. * guile/scm-disasm.c: Use C++ exception handling. * guile/scm-cmd.c: Use C++ exception handling. * guile/scm-breakpoint.c: Use C++ exception handling. * guile/scm-block.c: Use C++ exception handling. * guile/guile-internal.h: Use C++ exception handling. * gnu-v3-abi.c: Use C++ exception handling. * gdbtypes.c: Use C++ exception handling. * frame.c: Use C++ exception handling. * frame-unwind.c: Use C++ exception handling. * fbsd-tdep.c: Use C++ exception handling. * f-valprint.c: Use C++ exception handling. * exec.c: Use C++ exception handling. * event-top.c: Use C++ exception handling. * event-loop.c: Use C++ exception handling. * eval.c: Use C++ exception handling. * dwarf2read.c: Use C++ exception handling. * dwarf2loc.c: Use C++ exception handling. * dwarf2-frame.c: Use C++ exception handling. * dwarf2-frame-tailcall.c: Use C++ exception handling. * dwarf-index-write.c: Use C++ exception handling. * dwarf-index-cache.c: Use C++ exception handling. * dtrace-probe.c: Use C++ exception handling. * disasm-selftests.c: Use C++ exception handling. * darwin-nat.c: Use C++ exception handling. * cp-valprint.c: Use C++ exception handling. * cp-support.c: Use C++ exception handling. * cp-abi.c: Use C++ exception handling. * corelow.c: Use C++ exception handling. * completer.c: Use C++ exception handling. * compile/compile-object-run.c: Use C++ exception handling. * compile/compile-object-load.c: Use C++ exception handling. * compile/compile-cplus-symbols.c: Use C++ exception handling. * compile/compile-c-symbols.c: Use C++ exception handling. * common/selftest.c: Use C++ exception handling. * common/new-op.c: Use C++ exception handling. * cli/cli-script.c: Use C++ exception handling. * cli/cli-interp.c: Use C++ exception handling. * cli/cli-cmds.c: Use C++ exception handling. * c-varobj.c: Use C++ exception handling. * btrace.c: Use C++ exception handling. * breakpoint.c: Use C++ exception handling. * break-catch-throw.c: Use C++ exception handling. * arch-utils.c: Use C++ exception handling. * amd64-tdep.c: Use C++ exception handling. * ada-valprint.c: Use C++ exception handling. * ada-typeprint.c: Use C++ exception handling. * ada-lang.c: Use C++ exception handling. * aarch64-tdep.c: Use C++ exception handling. gdb/gdbserver/ChangeLog 2019-04-08 Tom Tromey <tom@tromey.com> * server.c: Use C++ exception handling. * linux-low.c: Use C++ exception handling. * gdbreplay.c: Use C++ exception handling. |
|
Tom Tromey | 3d6e9d2336 |
Make exceptions use std::string and be self-managing
This changes the exception's "message" member to be a shared_ptr wrapping a std::string. This allows removing the stack of exception messages, because now exceptions will self-destruct when needed. This also adds a noexcept copy constructor and operator= to gdb_exception, plus a "what" method. gdb/ChangeLog 2019-04-08 Tom Tromey <tom@tromey.com> * xml-support.c (gdb_xml_parser::parse): Update. * x86-linux-nat.c (x86_linux_nat_target::enable_btrace): Update. * value.c (show_convenience): Update. * unittests/cli-utils-selftests.c (test_number_or_range_parser) (test_parse_flags_qcs): Update. * thread.c (thr_try_catch_cmd): Update. * target.c (target_translate_tls_address): Update. * stack.c (print_frame_arg, read_frame_local, read_frame_arg) (info_frame_command_core, frame_apply_command_count): Update. * rust-exp.y (rust_lex_exception_test): Update. * riscv-tdep.c (riscv_print_one_register_info): Update. * remote.c (remote_target::enable_btrace): Update. * record-btrace.c (record_btrace_enable_warn): Update. * python/py-utils.c (gdbpy_convert_exception): Update. * printcmd.c (do_one_display, print_variable_and_value): Update. * mi/mi-main.c (mi_print_exception): Update. * mi/mi-interp.c (mi_cmd_interpreter_exec): Use SCOPE_EXIT. * mi/mi-cmd-stack.c (list_arg_or_local): Update. * linux-nat.c (linux_nat_target::attach): Update. * linux-fork.c (class scoped_switch_fork_info): Update. * infrun.c (displaced_step_prepare): Update. * infcall.c (call_function_by_hand_dummy): Update. * guile/scm-exception.c (gdbscm_scm_from_gdb_exception): Update. * gnu-v3-abi.c (print_one_vtable): Update. * frame.c (get_prev_frame_always): Update. * f-valprint.c (info_common_command_for_block): Update. * exec.c (try_open_exec_file): Update. * exceptions.c (print_exception, exception_print) (exception_fprintf, exception_print_same): Update. * dwarf2-frame.c (dwarf2_build_frame_info): Update. * dwarf-index-cache.c (index_cache::store) (index_cache::lookup_gdb_index): Update. * darwin-nat.c (maybe_cache_shell): Update. * cp-valprint.c (cp_print_value_fields): Update. * compile/compile-cplus-symbols.c (gcc_cplus_convert_symbol) (gcc_cplus_symbol_address): Update. * compile/compile-c-symbols.c (gcc_convert_symbol) (gcc_symbol_address, generate_c_for_for_one_variable): Update. * common/selftest.c: Update. * common/common-exceptions.h (struct gdb_exception) <message>: Now a std::string. (exception_try_scope_entry, exception_try_scope_exit): Don't declare. (struct exception_try_scope): Remove. (TRY): Don't use exception_try_scope. (struct gdb_exception): Add constructor, operator=. <what>: New method. (struct gdb_exception_RETURN_MASK_ALL) (struct gdb_exception_RETURN_MASK_ERROR) (struct gdb_exception_RETURN_MASK_QUIT): Add constructor. (struct gdb_quit_bad_alloc): Update. * common/common-exceptions.c (exception_none): Change initializer. (struct catcher) <state, exception>: Initialize inline. <prev>: Remove member. (current_catcher): Remove. (catchers): New global. (exceptions_state_mc_init): Simplify. (catcher_pop): Remove. (exceptions_state_mc, exceptions_state_mc_catch): Update. (try_scope_depth, exception_try_scope_entry) (exception_try_scope_exit): Remove. (throw_exception_sjlj): Update. (exception_messages, exception_messages_size): Remove. (throw_it): Simplify. (gdb_exception_sliced_copy): Remove. (throw_exception_cxx): Update. * cli/cli-script.c (script_from_file): Update. * breakpoint.c (insert_bp_location, update_breakpoint_locations): Update. * ada-valprint.c (ada_val_print): Update. * ada-lang.c (ada_to_fixed_type_1, ada_exception_name_addr) (create_excep_cond_exprs): Update. gdb/gdbserver/ChangeLog 2019-04-08 Tom Tromey <tom@tromey.com> * server.c (handle_btrace_general_set, handle_qxfer_btrace) (handle_qxfer_btrace_conf, detach_or_kill_for_exit_cleanup) (captured_main, main): Update. * gdbreplay.c (main): Update. |
|
Pedro Franco de Carvalho | 0570503dd3 |
Use linux_get_auxv to get AT_PHDR in the PPC stub
This patch fixes a build error due to a call to ppc_get_auxv that was
left over after linux_get_hwcap and linux_get_hwcap2 were introduced
in:
|
|
Tom Tromey | 227a9e65b9 |
Use upper-case for metasyntactic in gdbserver help
I noticed that "gdbserver --help" contains a few metasyntactic variables that aren't in upper-case. This patch fixes them to conform to the GNU standard. gdb/gdbserver/ChangeLog 2019-04-05 Tom Tromey <tromey@adacore.com> * server.c (gdbserver_usage): Use upper-case for metasyntactic variables. |
|
Alan Hayward | 69f4c9cc03 |
gdbserver: Ensure AT_HWCAP2 is defined
When using older compilers, AT_HWCAP2 may not be be defined. It is defined in elf/common.h, however including this in gdbserver/linux-low.c causes conflicts. Manually add the define if it does not exist. gdb/gdbserver/ChangeLog: * linux-low.c (AT_HWCAP2): Add define if not already included. |
|
Alan Hayward | 974c89e088 |
gdbserver: Add linux_get_hwcap
In gdbserver, Tidy up calls to read HWCAP (and HWCAP2) by adding common functions, removing the Arm, AArch64, PPC and S390 specific versions. No functionality differences. gdb/gdbserver/ChangeLog: * linux-aarch64-low.c (aarch64_get_hwcap): Remove function. (aarch64_arch_setup): Call linux_get_hwcap. * linux-arm-low.c (arm_get_hwcap): Remove function. (arm_read_description): Call linux_get_hwcap. * linux-low.c (linux_get_auxv): New function. (linux_get_hwcap): Likewise. (linux_get_hwcap2): Likewise. * linux-low.h (linux_get_hwcap): New declaration. (linux_get_hwcap2): Likewise. * linux-ppc-low.c (ppc_get_auxv): Remove function. (ppc_arch_setup): Call linux_get_hwcap. * linux-s390-low.c (s390_get_hwcap): Remove function. (s390_arch_setup): Call linux_get_hwcap. |
|
Alan Hayward | 1ef53e6b83 |
AArch64: gdbserver: read pauth registers
Add the pauth registers to the regset lists. Add a new regset type OPTIONAL_REGS which allows for the regset read to fail. Once the read fails, it will not be checked again. This allows targets with optional features to keep a single static regset_info structure. gdb/ChangeLog: * arch/aarch64.h (AARCH64_PAUTH_REGS_SIZE): New define. gdb/gdbserver/ChangeLog: * linux-aarch64-low.c (aarch64_store_pauthregset): New function. * linux-low.c (regsets_store_inferior_registers): Allow optional reads to fail. * linux-low.h (enum regset_type): Add OPTIONAL_REGS. |
|
Alan Hayward | ee4fbcfa26 |
AArch64: Use HWCAP to detect pauth feature
Add aarch64_get_hwcap functions for reading the HWCAP. From this extract the PACA value and use this to enable pauth. gdb/ChangeLog: * aarch64-linux-nat.c (aarch64_linux_nat_target::read_description): Read PACA hwcap. * aarch64-linux-tdep.c (aarch64_linux_core_read_description): Likewise. (aarch64_linux_get_hwcap): New function. * aarch64-linux-tdep.h (AARCH64_HWCAP_PACA): New define. (aarch64_linux_get_hwcap): New declaration. gdb/gdbserver/ChangeLog: * linux-aarch64-low.c (AARCH64_HWCAP_PACA): New define. (aarch64_get_hwcap): New function. (aarch64_arch_setup): Read APIA hwcap. |
|
Alan Hayward | 6dc0ebde59 |
AArch64: Add pointer authentication feature
Pointer Authentication is a new feature in AArch64 v8.3-a. When enabled in the compiler, function return addresses will be mangled by the kernel. Add register description xml and wire up to aarch64_linux_read_description. This description includes the two pauth user registers. Nothing yet uses the feature - that is added in later patches. gdb/ChangeLog: * aarch64-linux-nat.c (aarch64_linux_nat_target::read_description): Add pauth param. * aarch64-linux-tdep.c (aarch64_linux_core_read_description): Likewise. * aarch64-tdep.c (struct target_desc): Add in pauth. (aarch64_read_description): Add pauth param. (aarch64_gdbarch_init): Likewise. * aarch64-tdep.h (aarch64_read_description): Likewise. * arch/aarch64.c (aarch64_create_target_description): Likewise. * arch/aarch64.h (aarch64_create_target_description): Likewise. * features/Makefile: Add new files. * features/aarch64-pauth.c: New file. * features/aarch64-pauth.xml: New file. gdb/doc/ChangeLog: * gdb.texinfo: Describe pauth feature. gdb/gdbserver/ChangeLog: * linux-aarch64-ipa.c (get_ipa_tdesc): Add pauth param. (initialize_low_tracepoint): Likewise. * linux-aarch64-low.c (aarch64_arch_setup): Likewise. * linux-aarch64-tdesc-selftest.c (aarch64_tdesc_test): Likewise. * linux-aarch64-tdesc.c (struct target_desc): Likewise. (aarch64_linux_read_description): Likewise. * linux-aarch64-tdesc.h (aarch64_linux_read_description): Likewise. |
|
John Baldwin | 1163a4b7a3 |
Support the fs_base and gs_base registers on i386.
As on amd64, these registers hold the base address of the fs and gs segments, respectively. For i386 these two registers are 32 bits. gdb/ChangeLog: * amd64-fbsd-nat.c (amd64_fbsd_nat_target::read_description): Update calls to i386_target_description to add 'segments' parameter. * amd64-tdep.c (amd64_init_abi): Set tdep->fsbase_regnum. Don't add segment base registers. * arch/i386.c (i386_create_target_description): Add 'segments' parameter to enable segment base registers. * arch/i386.h (i386_create_target_description): Likewise. * features/i386/32bit-segments.xml: New file. * features/i386/32bit-segments.c: Generate. * i386-fbsd-nat.c (i386_fbsd_nat_target::read_description): Update call to i386_target_description to add 'segments' parameter. * i386-fbsd-tdep.c (i386fbsd_core_read_description): Likewise. * i386-go32-tdep.c (i386_go32_init_abi): Likewise. * i386-linux-tdep.c (i386_linux_read_description): Likewise. * i386-tdep.c (i386_validate_tdesc_p): Add segment base registers if feature is present. (i386_gdbarch_init): Pass I386_NUM_REGS to set_gdbarch_num_regs. Add 'segments' parameter to call to i386_target_description. (i386_target_description): Add 'segments' parameter to enable segment base registers. (_initialize_i386_tdep) [GDB_SELF_TEST]: Add 'segments' parameter to call to i386_target_description. * i386-tdep.h (struct gdbarch_tdep): Add 'fsbase_regnum'. (enum i386_regnum): Add I386_FSBASE_REGNUM and I386_GSBASE_REGNUM. Define I386_NUM_REGS. (i386_target_description): Add 'segments' parameter to enable segment base registers. gdb/gdbserver/ChangeLog: * linux-x86-tdesc.c (i386_linux_read_description): Update call to i386_create_target_description for 'segments' parameter. * lynx-i386-low.c (lynx_i386_arch_setup): Likewise. * nto-x86-low.c (nto_x86_arch_setup): Likewise. * win32-i386-low.c (i386_arch_setup): Likewise. |
|
Tom Tromey | d3a70e03cf |
Change iterate_over_lwps to take a gdb::function_view
This changes iterate_over_lwps to use a gdb::function_view. This was needed in order to make null_ptid and minus_one_ptid 'const'. gdb/ChangeLog 2019-03-12 Tom Tromey <tromey@adacore.com> * linux-nat.c (iterate_over_lwps): Update. (stop_callback): Remove parameter. (stop_wait_callback, detach_callback, resume_set_callback) (select_singlestep_lwp_callback, set_ignore_sigint) (status_callback, resumed_callback, resume_clear_callback) (kill_callback, kill_wait_callback, linux_nat_stop_lwp): Remove data parameter. (linux_nat_target::detach, linux_nat_target::resume) (linux_stop_and_wait_all_lwps, select_event_lwp) (linux_nat_filter_event, linux_nat_wait_1) (linux_nat_target::kill, linux_nat_target::stop) (linux_nat_target::stop): Update. (linux_nat_resume_callback): Change type. (resume_stopped_resumed_lwps, count_events_callback) (select_event_lwp_callback): Likewise. (linux_stop_lwp, linux_nat_stop_lwp): Update. * arm-linux-nat.c (struct update_registers_data): Remove. (update_registers_callback): Change type. (arm_linux_insert_hw_breakpoint1): Update. * nat/x86-linux-dregs.c (update_debug_registers_callback): Remove parameter. (x86_linux_dr_set_addr): Update. (x86_linux_dr_set_control): Update. * nat/linux-nat.h (iterate_over_lwps_ftype): Remove parameter. (iterate_over_lwps): Use gdb::function_view. * nat/aarch64-linux-hw-point.c (struct aarch64_dr_update_callback_param): Remove. (debug_reg_change_callback): Change type. (aarch64_notify_debug_reg_change): Update. * s390-linux-nat.c (s390_refresh_per_info): Update. gdb/gdbserver/ChangeLog 2019-03-12 Tom Tromey <tromey@adacore.com> * linux-low.c (iterate_over_lwps): Update. |
|
Tom Tromey | 37991b4f52 |
Remove last cleanup from gdbserver
This removes the last cleanup from gdbserver, replacing it with SCOPE_EXIT. This could perhaps be done in a different way, but this approach was direct and obviously correct. 2019-03-06 Tom Tromey <tom@tromey.com> * server.c (detach_or_kill_for_exit_cleanup): Remove parameter. (captured_main): Use SCOPE_EXIT. |
|
Sergio Durigan Junior | 45950eb600 |
Use '$enable_unittest' instead of '$development' on gdbserver/configure.srv (for 'aarch64*-*-linux*' case)
On commit
|
|
Eli Zaretskii | 41fa577fbc |
Fix GDB compilation on MinGW (PR gdb/24292)
gdb/ChangeLog: 2019-03-02 Eli Zaretskii <eliz@gnu.org> PR gdb/24292 * common/netstuff.c: * gdbserver/gdbreplay.c * gdbserver/remote-utils.c: * ser-tcp.c: * unittests/parse-connection-spec-selftests.c [USE_WIN32API]: Include ws2tcpip.h instead of wsiapi.h and winsock2.h. Redefine _WIN32_WINNT to 0x0501 if defined to a smaller value, as 'getaddrinfo' and 'freeaddrinfo' were not available before Windows XP, and mingw.org's MinGW headers by default define _WIN32_WINNT to 0x500. |
|
Tom Tromey | 43ac54fca3 |
Handle \r\n in gdbreplay
I tried gdbreplay yesterday, but the remotelogfile I received was made on Windows, so the lines were terminated with \r\n rather than plain \n. This patch changes gdbreplay to allow \r\n line termination when reading the log file. gdb/gdbserver/ChangeLog 2019-02-27 Tom Tromey <tromey@adacore.com> * gdbreplay.c (logchar): Handle \r\n. |
|
Alan Hayward | df0da8a2b8 |
gdbserver: When attaching, add process before lwps
The recent BP/WP changes for AArch64 swapping the order in add_lwp() so that the process was added before the lwp. This was due to the lwp creation requiring the process data. This also needs changing in linux_attach(). Also add additional checks to make sure cannot attach to the same process twice. Add test case for this - do this by splitting attach.exp into distinct pass and error case sections. Fixes gdb.server/ext-attach.exp on Aarch64. gdb/gdbserver/ChangeLog: * linux-low.c (linux_attach): Add process before lwp. * server.c (attach_inferior): Check if already attached. gdb/testsuite/ChangeLog: * gdb.base/attach.exp: Add double attach test. |
|
Tom Tromey | 1a5c25988e |
Normalize include guards in gdb
While working on my other scripts to deal with gdb headers, I noticed that some files were missing include guards. I wrote a script to add the missing ones, but found that using the obvious names for the guards ran into clashes -- for example, gdb/nat/linux-nat.h used "LINUX_NAT_H", but this was also the script's choice for gdb/linux-nat.h. So, I changed the script to normalize all include guards in gdb. This patch is the result. As usual the script is available here: https://github.com/tromey/gdb-refactoring-scripts Tested by rebuilding; I also ran it through "Fedora-x86_64-m64" on the buildbot. gdb/ChangeLog 2019-02-07 Tom Tromey <tom@tromey.com> * yy-remap.h: Add include guard. * xtensa-tdep.h: Add include guard. * xcoffread.h: Rename include guard. * varobj-iter.h: Add include guard. * tui/tui.h: Rename include guard. * tui/tui-winsource.h: Rename include guard. * tui/tui-wingeneral.h: Rename include guard. * tui/tui-windata.h: Rename include guard. * tui/tui-win.h: Rename include guard. * tui/tui-stack.h: Rename include guard. * tui/tui-source.h: Rename include guard. * tui/tui-regs.h: Rename include guard. * tui/tui-out.h: Rename include guard. * tui/tui-layout.h: Rename include guard. * tui/tui-io.h: Rename include guard. * tui/tui-hooks.h: Rename include guard. * tui/tui-file.h: Rename include guard. * tui/tui-disasm.h: Rename include guard. * tui/tui-data.h: Rename include guard. * tui/tui-command.h: Rename include guard. * tic6x-tdep.h: Add include guard. * target/waitstatus.h: Rename include guard. * target/wait.h: Rename include guard. * target/target.h: Rename include guard. * target/resume.h: Rename include guard. * target-float.h: Rename include guard. * stabsread.h: Add include guard. * rs6000-tdep.h: Add include guard. * riscv-fbsd-tdep.h: Add include guard. * regformats/regdef.h: Rename include guard. * record.h: Rename include guard. * python/python.h: Rename include guard. * python/python-internal.h: Rename include guard. * python/py-stopevent.h: Rename include guard. * python/py-ref.h: Rename include guard. * python/py-record.h: Rename include guard. * python/py-record-full.h: Rename include guard. * python/py-record-btrace.h: Rename include guard. * python/py-instruction.h: Rename include guard. * python/py-events.h: Rename include guard. * python/py-event.h: Rename include guard. * procfs.h: Add include guard. * proc-utils.h: Add include guard. * p-lang.h: Add include guard. * or1k-tdep.h: Rename include guard. * observable.h: Rename include guard. * nto-tdep.h: Rename include guard. * nat/x86-linux.h: Rename include guard. * nat/x86-linux-dregs.h: Rename include guard. * nat/x86-gcc-cpuid.h: Add include guard. * nat/x86-dregs.h: Rename include guard. * nat/x86-cpuid.h: Rename include guard. * nat/ppc-linux.h: Rename include guard. * nat/mips-linux-watch.h: Rename include guard. * nat/linux-waitpid.h: Rename include guard. * nat/linux-ptrace.h: Rename include guard. * nat/linux-procfs.h: Rename include guard. * nat/linux-osdata.h: Rename include guard. * nat/linux-nat.h: Rename include guard. * nat/linux-namespaces.h: Rename include guard. * nat/linux-btrace.h: Rename include guard. * nat/glibc_thread_db.h: Rename include guard. * nat/gdb_thread_db.h: Rename include guard. * nat/gdb_ptrace.h: Rename include guard. * nat/fork-inferior.h: Rename include guard. * nat/amd64-linux-siginfo.h: Rename include guard. * nat/aarch64-sve-linux-sigcontext.h: Rename include guard. * nat/aarch64-sve-linux-ptrace.h: Rename include guard. * nat/aarch64-linux.h: Rename include guard. * nat/aarch64-linux-hw-point.h: Rename include guard. * mn10300-tdep.h: Add include guard. * mips-linux-tdep.h: Add include guard. * mi/mi-parse.h: Rename include guard. * mi/mi-out.h: Rename include guard. * mi/mi-main.h: Rename include guard. * mi/mi-interp.h: Rename include guard. * mi/mi-getopt.h: Rename include guard. * mi/mi-console.h: Rename include guard. * mi/mi-common.h: Rename include guard. * mi/mi-cmds.h: Rename include guard. * mi/mi-cmd-break.h: Rename include guard. * m2-lang.h: Add include guard. * location.h: Rename include guard. * linux-record.h: Rename include guard. * linux-nat.h: Add include guard. * linux-fork.h: Add include guard. * i386-darwin-tdep.h: Rename include guard. * hppa-linux-offsets.h: Add include guard. * guile/guile.h: Rename include guard. * guile/guile-internal.h: Rename include guard. * gnu-nat.h: Rename include guard. * gdb-stabs.h: Rename include guard. * frv-tdep.h: Add include guard. * f-lang.h: Add include guard. * event-loop.h: Add include guard. * darwin-nat.h: Rename include guard. * cp-abi.h: Rename include guard. * config/sparc/nm-sol2.h: Rename include guard. * config/nm-nto.h: Rename include guard. * config/nm-linux.h: Add include guard. * config/i386/nm-i386gnu.h: Rename include guard. * config/djgpp/nl_types.h: Rename include guard. * config/djgpp/langinfo.h: Rename include guard. * compile/gcc-cp-plugin.h: Add include guard. * compile/gcc-c-plugin.h: Add include guard. * compile/compile.h: Rename include guard. * compile/compile-object-run.h: Rename include guard. * compile/compile-object-load.h: Rename include guard. * compile/compile-internal.h: Rename include guard. * compile/compile-cplus.h: Rename include guard. * compile/compile-c.h: Rename include guard. * common/xml-utils.h: Rename include guard. * common/x86-xstate.h: Rename include guard. * common/version.h: Rename include guard. * common/vec.h: Rename include guard. * common/tdesc.h: Rename include guard. * common/selftest.h: Rename include guard. * common/scoped_restore.h: Rename include guard. * common/scoped_mmap.h: Rename include guard. * common/scoped_fd.h: Rename include guard. * common/safe-iterator.h: Rename include guard. * common/run-time-clock.h: Rename include guard. * common/refcounted-object.h: Rename include guard. * common/queue.h: Rename include guard. * common/ptid.h: Rename include guard. * common/print-utils.h: Rename include guard. * common/preprocessor.h: Rename include guard. * common/pathstuff.h: Rename include guard. * common/observable.h: Rename include guard. * common/netstuff.h: Rename include guard. * common/job-control.h: Rename include guard. * common/host-defs.h: Rename include guard. * common/gdb_wait.h: Rename include guard. * common/gdb_vecs.h: Rename include guard. * common/gdb_unlinker.h: Rename include guard. * common/gdb_unique_ptr.h: Rename include guard. * common/gdb_tilde_expand.h: Rename include guard. * common/gdb_sys_time.h: Rename include guard. * common/gdb_string_view.h: Rename include guard. * common/gdb_splay_tree.h: Rename include guard. * common/gdb_setjmp.h: Rename include guard. * common/gdb_ref_ptr.h: Rename include guard. * common/gdb_optional.h: Rename include guard. * common/gdb_locale.h: Rename include guard. * common/gdb_assert.h: Rename include guard. * common/filtered-iterator.h: Rename include guard. * common/filestuff.h: Rename include guard. * common/fileio.h: Rename include guard. * common/environ.h: Rename include guard. * common/common-utils.h: Rename include guard. * common/common-types.h: Rename include guard. * common/common-regcache.h: Rename include guard. * common/common-inferior.h: Rename include guard. * common/common-gdbthread.h: Rename include guard. * common/common-exceptions.h: Rename include guard. * common/common-defs.h: Rename include guard. * common/common-debug.h: Rename include guard. * common/cleanups.h: Rename include guard. * common/buffer.h: Rename include guard. * common/btrace-common.h: Rename include guard. * common/break-common.h: Rename include guard. * cli/cli-utils.h: Rename include guard. * cli/cli-style.h: Rename include guard. * cli/cli-setshow.h: Rename include guard. * cli/cli-script.h: Rename include guard. * cli/cli-interp.h: Rename include guard. * cli/cli-decode.h: Rename include guard. * cli/cli-cmds.h: Rename include guard. * charset-list.h: Add include guard. * buildsym-legacy.h: Rename include guard. * bfin-tdep.h: Add include guard. * ax.h: Rename include guard. * arm-linux-tdep.h: Add include guard. * arm-fbsd-tdep.h: Add include guard. * arch/xtensa.h: Rename include guard. * arch/tic6x.h: Add include guard. * arch/i386.h: Add include guard. * arch/arm.h: Rename include guard. * arch/arm-linux.h: Rename include guard. * arch/arm-get-next-pcs.h: Rename include guard. * arch/amd64.h: Add include guard. * arch/aarch64-insn.h: Rename include guard. * arch-utils.h: Rename include guard. * annotate.h: Add include guard. * amd64-darwin-tdep.h: Rename include guard. * aarch64-linux-tdep.h: Add include guard. * aarch64-fbsd-tdep.h: Add include guard. * aarch32-linux-nat.h: Add include guard. gdb/gdbserver/ChangeLog 2019-02-07 Tom Tromey <tom@tromey.com> * x86-tdesc.h: Rename include guard. * x86-low.h: Add include guard. * wincecompat.h: Rename include guard. * win32-low.h: Add include guard. * utils.h: Rename include guard. * tracepoint.h: Rename include guard. * tdesc.h: Rename include guard. * target.h: Rename include guard. * server.h: Rename include guard. * remote-utils.h: Rename include guard. * regcache.h: Rename include guard. * nto-low.h: Rename include guard. * notif.h: Add include guard. * mem-break.h: Rename include guard. * lynx-low.h: Add include guard. * linux-x86-tdesc.h: Add include guard. * linux-s390-tdesc.h: Add include guard. * linux-ppc-tdesc-init.h: Add include guard. * linux-low.h: Add include guard. * linux-aarch64-tdesc.h: Add include guard. * linux-aarch32-low.h: Add include guard. * inferiors.h: Rename include guard. * i387-fp.h: Rename include guard. * hostio.h: Rename include guard. * gdbthread.h: Rename include guard. * gdb_proc_service.h: Rename include guard. * event-loop.h: Rename include guard. * dll.h: Rename include guard. * debug.h: Rename include guard. * ax.h: Rename include guard. |
|
Szabolcs Nagy | 956cc47c56 |
[PR gdb/23985] Fix libinproctrace.so build
The IPA objects currently may use gnulib replacement apis, which is wrong: gnulib is not linked into the produced dso and it cannot be because it is not built with -fPIC -fvisibility=hidden. The gnulib replacement detection is broken under cross compilation: for targets other than *-gnu*, replacements are enabled that depend on execution time detection. This causes unnecessary build failure when the target has proper support for the replaced api. This fix tries to undo the replacements, which is tricky because the gnulib headers are still used for various compile time fixups and there is no simple knob in gnulib to only turn the replacements off. Without this workaround gdb fails to cross build to non-gnu targets: ld: tracepoint-ipa.o: in function `gdb_agent_helper_thread(void*)': gdb/gdbserver/tracepoint.c:7221: undefined reference to `rpl_strerror' ... Makefile:434: recipe for target 'libinproctrace.so' failed gdb/gdbserver/ChangeLog: PR gdb/23985 * Makefile.in (IPAGENT_CFLAGS): Add UNDO_GNULIB_CFLAGS. (UNDO_GNULIB_CFLAGS): Undo gnulib replacements. |
|
Alan Hayward | 9ee1941355 |
Revert "gdbserver: When attaching, add process before lwps"
This reverts commit
|
|
Alan Hayward | f084d33511 |
gdbserver: When attaching, add process before lwps
The recent BP/WP changes for AArch64 swapping the order in add_lwp() so that the process was added before the lwp. This was due to the lwp creation requiring the process data. This also needs changing in linux_attach(). Fixes gdb.server/ext-attach.exp on Aarch64. (This regression was hidden due to the racy nature of the gdb.server tests - now they are no longer racy it'll be easier to spot. Also checked X86). gdb/gdbserver/ChangeLog: 2019-01-25 Alan Hayward <alan.hayward@arm.com> * linux-low.c (linux_attach): Add process before lwp. |
|
Tom Tromey | a0707f3c36 |
Don't use -I for common subdirectory
This changes the Makefiles to remove the -I for the common/ subdirectory. This will enforce the rule that includes must use the 'common/filename.h' form. gdb/ChangeLog 2019-01-25 Tom Tromey <tom@tromey.com> * Makefile.in (GDB_CFLAGS): Don't add -I for common. gdb/gdbserver/ChangeLog 2019-01-25 Tom Tromey <tom@tromey.com> * Makefile.in (INCLUDE_CFLAGS): Don't add -I for common. |