Commit Graph

68161 Commits

Author SHA1 Message Date
H.J. Lu e3949f17f3 Properly sign-extend byte.
gas/testsuite/

2011-01-18  H.J. Lu  <hongjiu.lu@intel.com>

	* gas/i386/intel.d: Updated.
	* gas/i386/opcode-intel.d: Likewise.
	* gas/i386/opcode-suffix.d: Likewise.
	* gas/i386/opcode.d: Likewise.

opcodes/

2011-01-18  H.J. Lu  <hongjiu.lu@intel.com>

	* i386-dis.c (sIbT): New.
	(b_T_mode): Likewise.
	(dis386): Replace sIb with sIbT on "pushT".
	(x86_64_table): Replace sIb with Ib on "aam" and "aad".
	(OP_sI): Handle b_T_mode.  Properly sign-extend byte.
2011-01-18 17:08:13 +00:00
H.J. Lu 0ae8ca9029 Add tbm flag and TBM instruction pattern.
2011-01-18  H.J. Lu  <hongjiu.lu@intel.com>

	* gas/i386/ilp32/x86-64-arch-2.d: Add tbm flag and TBM instruction
	pattern.
2011-01-18 16:39:50 +00:00
Joel Brobecker 10d4437041 fix printing of Ada wide characters on ppc-aix
Same problem as before: We were downcasting the character value from
int to unsigned char, which caused an overflow.  The reason why we did
not see this problem before is probably related to the fact that
we're using stabs on AIX and thus characters types are defined as
a TYPE_CODE_INT (or TYPE_CODE_RANGE?).

gdb/ChangeLog:

        * ada-valprint.c (ada_print_scalar): Remove unsigned char downcast.
        (ada_val_print_1): Likewise.
2011-01-18 16:38:59 +00:00
Joel Brobecker e3acb1155b [powerpc] breakpoint inserted past function end
On powerpc, the prologue scanner reads instruction after instruction,
and just skips instructions that do not affect a frame.  This means
that it does not stop if if finds and unexpected instruction (which
could possibly happen with optimization, I presume). To avoid scanning
too many instructions, it tries to establish an upper limit.

The upper limit is first computed using the debugging (line) info,
but if that fails, it falls back on an arbitrary 100 bytes (or 25
instructions).  The problem is that, if the function is shorter than
those 25 instructions, we run the risk of skipping the entire function
and returning a PC that's outside our function.

In the event where we can find a symbol for a given PC (and therefore
can determine function start and end addresses), but cannot find an
upper limit using skip_prologue_using_sal, then we can at least limit
make sure that the 25 instructions do not put us beyour our function.
If it does, then further reduce the upper-limit to the end of the function.

gdb/ChangeLog:

        * rs6000-tdep.c (rs6000_skip_prologue): Make sure that the prologue
        upper limit address is not greater than the function end address
        when the upper limit could not be computed using the debugging
        info.
2011-01-18 16:18:26 +00:00
Jan Kratochvil 752573b292 opcodes/
* i386-init.h: Regenerated.
	* i386-tbl.h: Regenerated.
2011-01-18 14:14:46 +00:00
Nick Clifton d68cd58c00 Fix compilation for mingw64.
* coffcode.h (coff_slurp_symbol_table): Add intptr_t intermediate
	typecast to avoid warning.
	* elf32-rx.c: Add "bfd_stdint.h" include required for int32_t type
	usage.
	* elfxx-ia64.c (elfNN_ia64_relax_br): Use intptr_t typeacast instead
	of long for pointer to avoid warning.
	(elfNN_ia64_relax_brl): Idem.
	(elfNN_ia64_install_value): Idem.
	* vms-alpha.c (_bfd_vms_slurp_etir): Idem.
2011-01-18 14:13:43 +00:00
Nick Clifton 4a58c4bdc9 * config/tc-arm.c (arm_cpus): Add Faraday ARMv5TE compatible
cores: fa606te, fa616te, fmp626.  Modify the VFP of fa626te.
	* doc/c-arm.texi (ARM Options): Add -mcpu={fa606te, fa616te,
	fmp626} options.
2011-01-18 14:10:44 +00:00
Nick Clifton 7c31ae1375 PR gas/12390
* doc/all.texi: Add NS32K
	* doc/as.texinfo: Remove target specific details of which
	characters act as comment initiators and statement separators into
	individual target specific files.
	* doc/c-alpha.texi (Alpha-Chars): Document special behaviour of
	the hash character at the start of a line.
	* doc/c-arm.texi (ARM-Chars): Likewise.
	* doc/c-avr.texi (AVR-Chars): Likewise.
	* doc/c-d10v.texi (D10V-Chars): Likewise.
	* doc/c-d30v.texi (D30V-Chars):	Likewise.
	* doc/c-mmix.texi (MMIX-Chars): Likewise.
	* doc/c-s390.texi (s390 characters): Likewise.
	* doc/c-sh.texi (SH-Chars): Likewise.
	* doc/c-sh64.texi (SH64-Chars): Likewise.
	* doc/c-sparc.texi (SPARC-Chars): Likewise.
	* doc/c-tic6x.texi (TIC6X Syntax): Likewise.
	* doc/c-xtensa.texi (Xtensa Syntax): Likewise.
	* doc/c-z80.texi (Z80-Chars): Likewise.
	* doc/c-z8k.texi (Z8000-Chars): Likewise.
	* doc/c-pdp11.texi (PDP11-Syntax): Document line separator character.
	* doc/c-arc.texi (ARC-Chars): Fill in this subsection.
	* doc/c-bfin.texi (Blackfin Syntax): Document line comment and
	line separator characters.
	* doc/c-cr16.texi (CR16 Syntax): Likewise.
	* doc/c-i386.texi (i386-Chars): Likewise.
	* doc/c-i860.texi (i860-Chars):	Likewise.
	* doc/c-i960.texi (i960-Chars):	Likewise.
	* doc/c-ip2k.texi (IP2K-Chars):	Likewise.
	* doc/c-lm32.texi (LM32-Chars):	likewise.
	* doc/c-m32c.texi (M32C-Chars): Likewise.
	* doc/c-m68hc11.texi (M68HC11-syntax): Likewise.
	* doc/c-m68k.texi (M68K-Chars): Likewise.
	* doc/c-microblaze.texi (MicroBlaze-Chars): Likewise.
	* doc/c-msp430.texi (MSP430-Chars): Likewise.
	* doc/c-mt.texi (MT-Chars): Likewise.
	* doc/c-ns32k.texi (NS32K-Chars): Likewise.
	* doc/c-pj.texi (PJ-Chars): Likewise.
	* doc/c-ppc.texi (PowerPC-Chars): Likewise.
	* doc/c-rx.texi (RX-Chars): Likewise.
	* doc/c-score.texi (SCORE-Chars): Likewise.
	* doc/c-tic54x.texi (TIC54X-Chars): Likewise.
	* doc/c-v850.texi (V850-Chars): Likewise.
	* doc/c-vax.texi (VAX-Chars): Likewise.
	* doc/c-xc16x.texi (xc16x-Chars): Likewise.
2011-01-18 13:37:39 +00:00
gdbadmin 849afc8b63 *** empty log message *** 2011-01-18 00:00:03 +00:00
Alan Modra 80caf2ef7b daily update 2011-01-17 23:00:05 +00:00
Quentin Neill 337e412819 Add TBM testsuite files missing from last commit. 2011-01-17 22:17:16 +00:00
Quentin Neill 2a2a0f38e7 Add support for TBM instructions.
gas/

2011-01-17  Quentin Neill  <quentin.neill@amd.com>

	* config/tc-i386.c (cpu_arch): Add CPU_TBM_FLAGS.

	* doc/c-i386.texi (i386-TBM): New section.

opcodes/

2011-01-17  Quentin Neill  <quentin.neill@amd.com>

	* i386-dis.c (REG_XOP_TBM_01): New.
	(REG_XOP_TBM_02): New.
	(reg_table): Add REG_XOP_TBM_01 and REG_XOP_TBM_02 tables.
	(xop_table): Redirect to REG_XOP_TBM_01 and REG_XOP_TBM_02
	entries, and add bextr instruction.

	* i386-gen.c (cpu_flag_init): Add CPU_TBM_FLAGS, CpuTBM.
	(cpu_flags): Add CpuTBM.

	* i386-opc.h (CpuTBM) New.
	(i386_cpu_flags): Add bit cputbm.

	* i386-opc.tbl: Add bextr, blcfill, blci, blcic, blcmsk,
	blcs, blsfill, blsic, t1mskc, and tzmsk.

	* i386-init.h: Regenerated.
	* i386-tbl.h: Regenerated

gas/testsuite

2011-01-17  Quentin Neill  <quentin.neill@amd.com>

	* gas/i386/tbm.s: New.
	* gas/i386/tbm.d: New.
	* gas/i386/tbm-intel.d: New.
	* gas/i386/x86-64-tbm.s: New.
	* gas/i386/x86-64-tbm.d: New.
	* gas/i386/x86-64-tbm-intel.d: New.
	* gas/i386/arch-10.d: Add tbm flag and TBM instruction pattern.
	* gas/i386/arch-10.s: Add a TBM instruction.
	* gas/i386/arch-10-1.l: Add TBM instruction pattern.
	* gas/i386/arch-10-2.l: Likewise.
	* gas/i386/arch-10-3.l: Likewise.
	* gas/i386/arch-10-4.l: Likewise.
	* gas/i386/x86-64-arch-2.s: Likewise.
	* gas/i386/x86-64-arch-2.d: Likewise.
2011-01-17 18:40:36 +00:00
Tom Tromey dc92e16124 * cli/cli-cmds.c (apropos_command): Free the compiled regex. Use
get_regcomp_error.
	* utils.c: Include gdb_regex.h.
	(do_regfree_cleanup): New function.
	(make_regfree_cleanup): Likewise.
	(get_regcomp_error): Likewise.
	* gdb_regex.h (make_regfree_cleanup, get_regcomp_error): Declare.
2011-01-17 16:50:42 +00:00
Richard Sandiford da17376b70 bfd/
* elf32-arm.c (elf32_arm_check_relocs): Check needs_plt rather than
	h->needs_plt when deciding whether to record a possible dynamic reloc.

ld/testsuite/
	* ld-arm/arm-rel32.s, ld-arm/arm-rel32.d: New testcase.
	* ld-arm/arm-elf.exp: Run it.
2011-01-17 16:36:43 +00:00
Richard Sandiford 1e81e12b2c bfd/
* elf32-arm.c (elf32_arm_gc_sweep_hook): Remove all registered
	dynamic relocs for the removed section.

ld/testsuite/
	* ld-arm/gc-thumb-lib.s, ld-arm/gc-thumb.s,
	ld-arm/gc-thumb.d: New test.
	* ld-arm/arm-elf.exp: Run it.
2011-01-17 16:36:15 +00:00
Tom Tromey f55af66d6e * cli/cli-cmds.c (apropos_command): Fix formatting. Don't call
re_compile_fastmap.
2011-01-17 16:20:56 +00:00
Pierre Muller a5a44b5381 * p-exp.y (intvar): New static variable, used to set CURRENT_TYPE
for internal variables.
	(last_was_structop): New static variable.
	(COMPLETE): New token.
	(field_exp): New rule to group all '.' suffix handling.
	Add mark_struct_expression calls when approriate to be able
	to correctly find fields for completion.
	(yylex): Adapt to handle field completion and set INTVAR when
	required.
2011-01-17 10:34:51 +00:00
gdbadmin e870b9ca1b *** empty log message *** 2011-01-17 00:00:33 +00:00
Alan Modra c642972dea daily update 2011-01-16 23:00:06 +00:00
H.J. Lu 862be3fb9a Disallow 64bit relocations in x32 mode.
gas/

2011-01-16  H.J. Lu  <hongjiu.lu@intel.com>

	* config/tc-i386.c (disallow_64bit_disp): Renamed to ...
	(disallow_64bit_reloc): This.
	(md_assemble): Don't check movabs for x32 mode here.
	(i386_target_format): Updated.
	(tc_gen_reloc): Check if 64bit relocations are allowed.

gas/testsuite/

2011-01-16  H.J. Lu  <hongjiu.lu@intel.com>

	* gas/i386/ilp32/immed64.s: New.
	* gas/i386/ilp32/reloc64.s: Likewise.
	* gas/i386/ilp32/x86-64-pcrel.s: Likewise.

	* gas/i386/ilp32/inval.s: Add more tests.

	* gas/i386/ilp32/immed64.d: Updated.
	* gas/i386/ilp32/inval.l: Likewise.
	* gas/i386/ilp32/reloc64.d: Likewise.
	* gas/i386/ilp32/x86-64-pcrel.d: Likewise.
2011-01-16 17:06:12 +00:00
gdbadmin f9a63d49c7 *** empty log message *** 2011-01-16 00:00:33 +00:00
Alan Modra 425b3142a8 daily update 2011-01-15 23:00:05 +00:00
H.J. Lu 4a22cb7c64 Update ChangeLog. 2011-01-15 17:25:30 +00:00
H.J. Lu d1534d1688 Check invalid x32 relocations.
2011-01-15  H.J. Lu  <hongjiu.lu@intel.com>

	* elf64-x86-64.c (elf_x86_64_check_relocs): Check invalid x32
	relocations.
2011-01-15 15:49:48 +00:00
H.J. Lu 7f56bc95d6 Don't allow movabs with relocation in x32 mode.
gas/

2011-01-15  H.J. Lu  <hongjiu.lu@intel.com>

	* config/tc-i386.c (disallow_64bit_disp): New.
	(x86_elf_abi): Replace X86_64_LP64_ABI/X86_64_ILP32_ABI with
	X86_64_ABI/X86_64_X32_ABI.
	(md_assemble): Don't allow movabs with relocation in x32 mode.
	(i386_target_format): Updated.

gas/testsuite/

2011-01-15  H.J. Lu  <hongjiu.lu@intel.com>

	* gas/i386/ilp32/ilp32.exp: Run inval.

	* gas/i386/ilp32/inval.l: New.
	* gas/i386/ilp32/inval.s: Likewise.
	* gas/i386/ilp32/x86-64.s: Likewise.

	* gas/i386/ilp32/x86-64.d: Don't use ../x86_64.s.  Updated.
2011-01-15 15:48:02 +00:00
H.J. Lu 9d53781512 Replace n32 with x32. 2011-01-15 00:38:35 +00:00
gdbadmin e8d8a7b622 *** empty log message *** 2011-01-15 00:00:03 +00:00
H.J. Lu 570561f71a Rename --n32 to --x32.
gas/

2011-01-14  H.J. Lu  <hongjiu.lu@intel.com>

	* config/tc-i386.c (OPTION_N32): Renamed to ...
	(OPTION_X32): This.
	(md_longopts): Replace n32 with x32.
	(md_parse_option): Updated.
	(md_show_usage): Likewise.

	* doc/c-i386.texi: Replace n32 with x32.

gas/testsuite/

2011-01-14  H.J. Lu  <hongjiu.lu@intel.com>

	* gas/i386/ilp32/cfi/ilp32.exp: Replace --n32 with --x32.
	* gas/i386/ilp32/elf/ilp32.exp: Likewise.
	* gas/i386/ilp32/ilp32.exp: Likewise.
	* gas/i386/ilp32/lns/ilp32.exp: Likewise.

ld/testsuite/

2011-01-14  H.J. Lu  <hongjiu.lu@intel.com>

	* ld-x86-64/ilp32-1.d: Replace --n32 with --x32.
	* ld-x86-64/ilp32-2.d: Likewise.
	* ld-x86-64/ilp32-3.d: Likewise.
	* ld-x86-64/ilp32-4.d: Likewise.
	* ld-x86-64/ilp32-5.d: Likewise.
	* ld-x86-64/x86-64.exp: Likewise.
2011-01-14 23:07:11 +00:00
Alan Modra feeb563187 daily update 2011-01-14 23:00:09 +00:00
H.J. Lu 248775ba37 Handle R_X86_64_32 like R_X86_64_64 for ILP32.
bfd/

2011-01-14  H.J. Lu  <hongjiu.lu@intel.com>

	* elf64-x86-64.c (elf_x86_64_link_hash_table): Add pointer_r_type.
	(elf_x86_64_link_hash_table_create): Set pointer_r_type.
	(elf_x86_64_check_relocs): Handle R_X86_64_32 like R_X86_64_64
	for ILP32.  Remove ABI_64_P PIC check for R_X86_64_8,
	R_X86_64_16, R_X86_64_32 and R_X86_64_32S.
	(elf_x86_64_relocate_section):  Handle R_X86_64_32 like R_X86_64_64
	for ILP32.

ld/testsuite/

2011-01-14  H.J. Lu  <hongjiu.lu@intel.com>

	* ld-x86-64/ilp32-5.d: New.
	* ld-x86-64/ilp32-5.s: Likewise.

	* ld-x86-64/x86-64.exp: Run ilp32-5.
2011-01-14 22:48:12 +00:00
Yao Qi 2c291032cc 2011-01-14 Yao Qi <yao@codesourcery.com>
* arm-tdep.c (arm_register_reggroup_p): FPS register is in
	save_reggroup, restore_reggroup and all_reggroup.
2011-01-14 20:37:13 +00:00
Joel Brobecker b075872c94 new testcase printing wchar_t characters and strings
gdb/testsuite/ChangeLog:

        * gdb.base/wchar.c, gdb.base/wchar.exp: New testcases.
2011-01-14 19:33:37 +00:00
Joel Brobecker 2c3e6e2466 new testcase for Ada Wide Wide Characters and Strings
gdb/testsuite/ChangeLog:

        * gdb.ada/widewide: New testcase.
2011-01-14 19:33:19 +00:00
Joel Brobecker 447b483c37 Fix printing of Wide_Character & Wide_Wide_Character entities.
Wide_Characters and Wide_Wide_Characters are incorrectly printed.
Consider for instance:

    Medium : Wide_Character := Wide_Character'Val(16#dead#);

Trying to print the value of this variable yields:

    (gdb) p medium
    $1 = 57005 '["ad"]'

The integer value is correct (57005 = 0xdead), but the character
representation is not, it should be:

    $1 = 57005 '["dead"]'

Same for Wide_Wide_Characters.

There were two issues:
   (a) The first issue was in ada-valprint, where we were assuming
       that character types were 1 byte long;
   (b) The second problem was in c-valprint, where we were down-casting
       the integer value of the character to type `unsigned char',
       causing use to lose all but the lowest byte.

gdb/ChangeLog:

        * ada-valprint. (ada_printchar): Use the correct type length
        in call to ada_emit_char.
        * c-valprint.c (c_val_print): Remove cast in call to LA_PRINT_CHAR.
2011-01-14 19:32:56 +00:00
Pierre Muller 7b64a93b03 * solib-som.h (hpux_major_release): Declare variable here.
* solib-som.c:  Remove <sys/utsname.h> header.
	(DEFAULT_HPUX_MAJOR_RELEASE): New macro.
	(hpux_major_release): Make global, change default value to
	DEFAULT_HPUX_MAJOR_RELEASE.
	(get_hpux_major_release): Simply return HPUX_MAJOR_RELEASE.
	* hppa-hpux-nat.c: Add <sys/utsname.h> include.
	Add "solib-som.h" header.
	(set_hpux_major_release): New function.
	(_initialize_hppa_hpux_nat): Call set_hpux_major_release.
2011-01-14 18:39:31 +00:00
Mike Frysinger 4e18c05334 gdb: extend Linux osabi match
The current osabi default matching misses all *-uclinux tuples.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-01-14 18:16:34 +00:00
Joel Brobecker a9df6b2252 fix ARI warnings introduced by ia64-hpux patches
gdb/ChangeLog:

        * ia64-hpux-nat.c (ia64_hpux_fetch_register): Remove trailing
        new-line at end of warning message.
        (ia64_hpux_store_register): Remove trailing new-line at end of
        error message.
        * ia64-hpux-tdep.c: Rephrase comment.
        * solib-ia64-hpux.c (struct dld_info): Change type of field
        dld_flags from "long long" to ULONGEST.
2011-01-14 13:53:02 +00:00
Pedro Alves ecb956dd69 * target.h (deprecated_child_ops): Delete declaration.
* target.c (deprecated_child_ops): Delete definition.
2011-01-14 13:47:15 +00:00
Pedro Alves 715f468029 gdb/
* Makefile.in (hpux-thread.o): Delete rule.
	* configure.ac: Don't check for HPUX DCE threads support.
	* configure, config.in: Regenerate.
	* hppa-hpux-nat.c (child_suppress_run): Delete.
	(hppa_hpux_child_can_run): Delete.
	(_initialize_hppa_hpux_nat): Don't override to_can_run.
	* hpux-thread.c: Delete.
2011-01-14 13:43:16 +00:00
Pedro Alves 76adfcaec1 * Makefile.in (hpux-thread.o): Delete rule.
* configure.ac: Don't check for HPUX DCE threads support.
	* configure, config.in: Regenerate.
	* hppa-hpux-nat.c (child_suppress_run): Delete.
	(hppa_hpux_child_can_run): Delete.
	(_initialize_hppa_hpux_nat): Don't override to_can_run.
	* hpux-thread.c: Delete.
2011-01-14 13:38:24 +00:00
Alan Modra e922bcabdf * ldmain.c (main): Flush stdout before and stderr after printing
message.
	* ldmisc.c (einfo): Similarly.
	* plugin.c (message): Likewise.
	* emultempl/ppc64elf.em: Likewise.
	* emultempl/xtensaelf.em: Likewise.
	* emulparams/elf32mcore.sh: Use einfo rather than printf.
	* emultempl/beos.em: Likewise.
	* emultempl/pe.em: Likewise.
	* emultempl/pep.em: Likewise.
2011-01-14 12:37:17 +00:00
Alan Modra 4a97a0e54c * bfd.c (bfd_perror): Flush stdout before and stderr after printing
error.
	(_bfd_default_error_handler): Likewise.
	* elf.c (print_segment_map): Likewise.
	* libbfd.c (warn_deprecated): Likewise.
	* som.c (som_sizeof_headers): No need to do so here.
	* coff-i860.c: Replace use of printf for error messages with
	_bfd_error_handler.
	* coff-ppc.c: Likewise.
	* coff-sh.c: Likewise.
	* elf32-bfin.c: Likewise.
	* elf32-dlx.c: Likewise.
	* elf32-mep.c: Likewise.
	* elf32-v850.c: Likewise.
	* mach-o.c: Likewise.
	* pef.c: Likewise.
2011-01-14 12:35:56 +00:00
H.J. Lu 82e96e07e5 Fix x86-64 ILP32 shared library.
bfd/

2011-01-13  H.J. Lu  <hongjiu.lu@intel.com>

	* elf64-x86-64.c (elf_x86_64_link_hash_table): Remove
	swap_reloca_out.
	(elf_x86_64_link_hash_table_create): Don't set swap_reloca_out.
	(elf_x86_64_check_relocs): Align relocation section to 4 byte
	for 32bit.
	(elf_x86_64_gc_sweep_hook): Replace ELF64_ST_TYPE with
	ELF_ST_TYPE.
	(elf_x86_64_finish_dynamic_symbol): Updated.
	(elf_x86_64_finish_dynamic_sections): Don't use
	Elf64_External_Dyn, bfd_elf64_swap_dyn_in, nor
	bfd_elf64_swap_dyn_out.

ld/testsuite/

2011-01-13  H.J. Lu  <hongjiu.lu@intel.com>

	* ld-x86-64/ilp32-4.d: New.

	* ld-x86-64/x86-64.exp: Run ilp32-4.
2011-01-14 04:24:00 +00:00
Alan Modra 175b7cd42c * emultempl/elf32.em (gld${EMULATION_NAME}_place_orphan): Don't
attempt to put non-alloc orphans before debug sections, just place
	them after .comment.
2011-01-14 02:27:41 +00:00
Alan Modra a05e447ffb PR ld/12339
* ldlang.c (sort_def_symbol): Handle bfd_link_hash_warning symbols.
2011-01-14 02:18:22 +00:00
Alan Modra e6a6bb22ab PR ld/12339
* elf32-arm.c (allocate_dynrelocs): Don't set up eh before
	following bfd_link_hash_warning symbol link.
2011-01-14 02:17:58 +00:00
Alan Modra 3ed41d5946 * Makefile.am: Sort emulation rules.
(eelf32am33lin.c): Delete.
	(ALL_EMULATION_SOURCES): Sort, add missing entries.
	(ALL_64_EMULATION_SOURCES): Likewise.
	* Makefile.in: Regenerate.
2011-01-14 02:03:42 +00:00
gdbadmin a98d25b37c *** empty log message *** 2011-01-14 00:00:03 +00:00
Joel Brobecker 042e866ed2 delete hpux_pid_to_str (unused)
This function is unused, and the default formatting routine does
just fine, I think.   On pa-hpux:

        [New process 12565, lwp 2513]
        [New process 12565, lwp 2514]

So this patch deletes it.

gdb/ChangeLog:

        * hpux-thread.c (hpux_pid_to_str): Delete.
2011-01-13 23:55:34 +00:00
Joel Brobecker 4ffa5a3392 [Ada] Fix printing of Wide_Wide_Strings
This fixes the printing of Wide_Wide_String objects.  For instance,
consider:

    My_WWS : Wide_Wide_String := " helo";

Before this patch is applied, GDB prints:

    (gdb) print my_wws
    $1 = " ["00"]h["00"]e"

gdb/ChangeLog:

        * ada-valprint.c (ada_emit_char): Remove strange code.
        Check that c is <= UCHAR_MAX before passing it to isascii.
        (char_at): Do not assume that TYPE_LEN is either 1 or 2.
2011-01-13 23:01:22 +00:00