294 Commits
| Author | SHA1 | Message | Date |
|---|---|---|---|
Kevin Buettner
|
2b1ffcfd6f |
Use BLOCK_ENTRY_PC in place of most uses of BLOCK_START
This change/patch substitues BLOCK_ENTRY_PC for BLOCK_START in places where BLOCK_START is used to obtain the address at which execution should enter the block. Since blocks can now contain non-contiguous ranges, the BLOCK_START - which is still be the very lowest address in the block - might not be the same as BLOCK_ENTRY_PC. There is a change to infrun.c which is less obvious and less mechanical. I'm posting it as a separate patch. gdb/ChangeLog: * ax-gdb.c (gen_var_ref): Use BLOCK_ENTRY_PC in place of BLOCK_START. * blockframe.c (get_pc_function_start): Likewise. * compile/compile-c-symbols.c (convert_one_symbol): Likewise. (gcc_symbol_address): Likewise. * compile/compile-object-run.c (compile_object_run): Likewise. * compile/compile.c (get_expr_block_and_pc): Likewise. * dwarf2loc.c (dwarf2_find_location_expression): Likewise. (func_addr_to_tail_call_list): Likewise. * findvar.c (default_read_var_value): Likewise. * inline-frame.c (inline_frame_this_id): Likewise. (skip-inline_frames): Likewise. * infcmd.c (until_next_command): Likewise. * linespec.c (convert_linespec_to_sals): Likewise. * parse.c (parse_exp_in_context_1): Likewise. * printcmd.c (build_address_symbolic): likewise. (info_address_command): Likewise. symtab.c (find_function_start_sal): Likewise. (skip_prologue_sal): Likewise. (find_function_alias_target): Likewise. (find_gnu_ifunc): Likewise. * stack.c (find_frame_funname): Likewise. * symtab.c (fixup_symbol_section): Likewise. (find_function_start_sal): Likewise. (skip_prologue_sal): Likewsie. (find_function_alias_target): Likewise. (find_gnu_ifunc): Likewise. * tracepoint.c (info_scope_command): Likewise. * value.c (value_fn_field): Likewise. |
|
Tom Tromey
|
dba7455e76 |
Remove old lint code
This removes dead code that, according to the comments, existed to placate lint. I don't think this has been relevant in a long time, and certainly not since gdb switched to C++. Tested by rebuilding. ChangeLog 2018-07-30 Tom Tromey <tom@tromey.com> * cli/cli-decode.c (lookup_cmd): Remove lint code. * value.c (unpack_long): Remove lint code. * valops.c (value_ind): Remove lint code. * valarith.c (value_x_binop, value_x_unop, value_equal) (value_pos): Remove lint code. |
|
|
Tom Tromey
|
8c8807f439 |
Remove unused declaration from value.c
This removes an unused declaration from value_fetch_lazy_bitfield. Because it is not completely clear if the check_typedef call is needed somewhere beneath this function, this is broken out into a separate patch. gdb/ChangeLog 2018-07-22 Tom Tromey <tom@tromey.com> * value.c (value_fetch_lazy_bitfield): Remove unused variable. |
|
Pedro Alves
|
8b88a78e63 |
target_stack -> current_top_target() throughout
The recent C++ification of target_ops replaced references to the old "current_target" squashed target throughout with references to a "target_stack" pointer. I had picked the "target_stack" name very early in the multi-target work, and managed to stick with it, even though it's a bit of a misnomer, since it isn't really a "target stack" object, but a pointer into the current top target in the stack. As I'm splitting more pieces off of the multi-target branch, I've come to think that it's better to rename it now. A following patch will introduce a new class to represent a target stack, and "target_stack" would be _its_ ideal name. (In the branch, the class is called a_target_stack to work around the clash.) Thus this commit renames target_stack to current_top_target and replaces all references throughout. Also, while at it, current_top_target is made a function instead of a pointer, to make it possible to change its internal implementation without leaking implementation details out. In a couple patches, the implementation of the function will change to refer to a target stack object, and then further down the multi-target work, it'll change again to find the right target stack for the current inferior. gdb/ChangeLog: 2018-06-07 Pedro Alves <palves@redhat.com> * target.h (target_stack): Delete. (current_top_target): Declare function. * target.c (target_stack): Delete. (g_current_top_target): New. (current_top_target): New function. * auxv.c: Use current_top_target instead of target_stack throughout. * avr-tdep.c: Likewise. * breakpoint.c: Likewise. * corefile.c: Likewise. * elfread.c: Likewise. * eval.c: Likewise. * exceptions.c: Likewise. * frame.c: Likewise. * gdbarch-selftests.c: Likewise. * gnu-v3-abi.c: Likewise. * ia64-tdep.c: Likewise. * ia64-vms-tdep.c: Likewise. * infcall.c: Likewise. * infcmd.c: Likewise. * infrun.c: Likewise. * linespec.c: Likewise. * linux-tdep.c: Likewise. * minsyms.c: Likewise. * ppc-linux-nat.c: Likewise. * ppc-linux-tdep.c: Likewise. * procfs.c: Likewise. * regcache.c: Likewise. * remote.c: Likewise. * rs6000-tdep.c: Likewise. * s390-linux-nat.c: Likewise. * s390-tdep.c: Likewise. * solib-aix.c: Likewise. * solib-darwin.c: Likewise. * solib-dsbt.c: Likewise. * solib-spu.c: Likewise. * solib-svr4.c: Likewise. * solib-target.c: Likewise. * sparc-tdep.c: Likewise. * sparc64-tdep.c: Likewise. * spu-tdep.c: Likewise. * symfile.c: Likewise. * symtab.c: Likewise. * target-descriptions.c: Likewise. * target-memory.c: Likewise. * target.c: Likewise. * target.h: Likewise. * tracefile-tfile.c: Likewise. * tracepoint.c: Likewise. * valops.c: Likewise. * valprint.c: Likewise. * value.c: Likewise. * windows-tdep.c: Likewise. * mi/mi-main.c: Likewise. |
|
Simon Marchi
|
41c60b4b26 |
Split value_fetch_lazy
While reading value_fetch_lazy, I thought it would be good to split it in small functions (especially the part that handles lval_register). gdb/ChangeLog: * value.c (value_fetch_lazy_bitfield): New. (value_fetch_lazy_memory): New. (value_fetch_lazy_register): New. (value_fetch_lazy): Factor out to smaller functions. |
|
|
Tom Tromey
|
41a883c8ed |
Clear entire "location" in value constructor
My recent change to allocate values with "new" may have introduced a small bug. In particular, the previous code allocated with XCNEW, but the new code only clears a part of the "location" field in the constructor. I didn't try very hard to actually trigger a bug here, the problem remains theoretical. This patch just arranges to initialize the entire location. Regression tested by the buildbot. 2018-05-25 Tom Tromey <tom@tromey.com> * value.c (value::location): Initialize. |
|
|
Simon Marchi
|
3e6188349f |
value.c: Remove unused variables
Obvious patch to remove unused local variables (found by adding -Wunused). I didn't touch this one in value_fetch_lazy, because check_typedef could have a desired side-effect. 3743 struct type *type = check_typedef (value_type (val)); gdb/ChangeLog: * value.c (release_value): Remove unused variable. (record_latest_value): Likewise. (access_value_history): Likewise. (preserve_values): Likewise. |
|
|
Pedro Alves
|
f6ac5f3d63 |
Convert struct target_ops to C++
I.e., use C++ virtual methods and inheritance instead of tables of
function pointers.
Unfortunately, there's no way to do a smooth transition. ALL native
targets in the tree must be converted at the same time. I've tested
all I could with cross compilers and with help from GCC compile farm,
but naturally I haven't been able to test many of the ports. Still, I
made a best effort to port everything over, and while I expect some
build problems due to typos and such, which should be trivial to fix,
I don't expect any design problems.
* Implementation notes:
- The flattened current_target is gone. References to current_target
or current_target.beneath are replaced with references to
target_stack (the top of the stack) directly.
- To keep "set debug target" working, this adds a new debug_stratum
layer that sits on top of the stack, prints the debug, and delegates
to the target beneath.
In addition, this makes the shortname and longname properties of
target_ops be virtual methods instead of data fields, and makes the
debug target defer those to the target beneath. This is so that
debug code sprinkled around that does "if (debugtarget) ..." can
transparently print the name of the target beneath.
A patch later in the series actually splits out the
shortname/longname methods to a separate structure, but I preferred
to keep that chance separate as it is associated with changing a bit
the design of how targets are registered and open.
- Since you can't check whether a C++ virtual method is overridden,
the old method of checking whether a target_ops implements a method
by comparing the function pointer must be replaced with something
else.
Some cases are fixed by adding a parallel "can_do_foo" target_ops
methods. E.g.,:
+ for (t = target_stack; t != NULL; t = t->beneath)
{
- if (t->to_create_inferior != NULL)
+ if (t->can_create_inferior ())
break;
}
Others are fixed by changing void return type to bool or int return
type, and have the default implementation return false or -1, to
indicate lack of support.
- make-target-delegates was adjusted to generate C++ classes and
methods.
It needed tweaks to grok "virtual" in front of the target method
name, and for the fact that methods are no longer function pointers.
(In particular, the current code parsing the return type was simple
because it could simply parse up until the '(' in '(*to_foo)'.
It now generates a couple C++ classes that inherit target_ops:
dummy_target and debug_target.
Since we need to generate the class declarations as well, i.e., we
need to emit methods twice, we now generate the code in two passes.
- The core_target global is renamed to avoid conflict with the
"core_target" class.
- ctf/tfile targets
init_tracefile_ops is replaced by a base class that is inherited by
both ctf and tfile.
- bsd-uthread
The bsd_uthread_ops_hack hack is gone. It's not needed because
nothing was extending a target created by bsd_uthread_target.
- remote/extended-remote targets
This is a first pass, just enough to C++ify target_ops.
A later pass will convert more free functions to methods, and make
remote_state be truly per remote instance, allowing multiple
simultaneous instances of remote targets.
- inf-child/"native" is converted to an actual base class
(inf_child_target), that is inherited by all native targets.
- GNU/Linux
The old weird double-target linux_ops mechanism in linux-nat.c, is
gone, replaced by adding a few virtual methods to linux-nat.h's
target_ops, called low_XXX, that the concrete linux-nat
implementations override. Sort of like gdbserver's
linux_target_ops, but simpler, for requiring only one
target_ops-like hierarchy, which spares implementing the same method
twice when we need to forward the method to a low implementation.
The low target simply reimplements the target_ops method directly in
that case.
There are a few remaining linux-nat.c hooks that would be better
converted to low_ methods like above too. E.g.:
linux_nat_set_new_thread (t, x86_linux_new_thread);
linux_nat_set_new_fork (t, x86_linux_new_fork);
linux_nat_set_forget_process
That'll be done in a follow up patch.
- We can no longer use functions like x86_use_watchpoints to install
custom methods on an arbitrary base target.
The patch replaces instances of such a pattern with template mixins.
For example memory_breakpoint_target defined in target.h, or
x86_nat_target in x86-nat.h.
- linux_trad_target, MIPS and Alpha GNU/Linux
The code in the new linux-nat-trad.h/c files which was split off of
inf-ptrace.h/c recently, is converted to a C++ base class, and used
by the MIPS and Alpha GNU/Linux ports.
- BSD targets
The
$architecture x NetBSD/OpenBSD/FreeBSD
support matrix complicates things a bit. There's common BSD target
code, and there's common architecture-specific code shared between
the different BSDs. Currently, all that is stiched together to form
a final target, via the i386bsd_target, x86bsd_target,
fbsd_nat_add_target functions etc.
This introduces new fbsd_nat_target, obsd_nat_target and
nbsd_nat_target classes that serve as base/prototype target for the
corresponding BSD variant.
And introduces generic i386/AMD64 BSD targets, to be used as
template mixin to build a final target. Similarly, a generic SPARC
target is added, used by both BSD and Linux ports.
- bsd_kvm_add_target, BSD libkvm target
I considered making bsd_kvm_supply_pcb a virtual method, and then
have each port inherit bsd_kvm_target and override that method, but
that was resulting in lots of unjustified churn, so I left the
function pointer mechanism alone.
gdb/ChangeLog:
2018-05-02 Pedro Alves <palves@redhat.com>
John Baldwin <jhb@freebsd.org>
* target.h (enum strata) <debug_stratum>: New.
(struct target_ops) <all delegation methods>: Replace by C++
virtual methods, and drop "to_" prefix. All references updated
throughout.
<to_shortname, to_longname, to_doc, to_data,
to_have_steppable_watchpoint, to_have_continuable_watchpoint,
to_has_thread_control, to_attach_no_wait>: Delete, replaced by
virtual methods. All references updated throughout.
<can_attach, supports_terminal_ours, can_create_inferior,
get_thread_control_capabilities, attach_no_wait>: New
virtual methods.
<insert_breakpoint, remove_breakpoint>: Now
TARGET_DEFAULT_NORETURN methods.
<info_proc>: Now returns bool.
<to_magic>: Delete.
(OPS_MAGIC): Delete.
(current_target): Delete. All references replaced by references
to ...
(target_stack): ... this. New.
(target_shortname, target_longname): Adjust.
(target_can_run): Now a function declaration.
(default_child_has_all_memory, default_child_has_memory)
(default_child_has_stack, default_child_has_registers)
(default_child_has_execution): Remove target_ops parameter.
(complete_target_initialization): Delete.
(memory_breakpoint_target): New template class.
(test_target_ops): Refactor as a C++ class with virtual methods.
* make-target-delegates (NAME_PART): Tighten.
(POINTER_PART, CP_SYMBOL): New.
(SIMPLE_RETURN_PART): Reimplement.
(VEC_RETURN_PART): Expect less.
(RETURN_PART, VIRTUAL_PART): New.
(METHOD): Adjust to C++ virtual methods.
(scan_target_h): Remove reference to C99.
(dname): Output "target_ops::" prefix.
(write_function_header): Adjust to output a C++ class method.
(write_declaration): New.
(write_delegator): Adjust to output a C++ class method.
(tdname): Output "dummy_target::" prefix.
(write_tdefault, write_debugmethod): Adjust to output a C++ class
method.
(tdefault_names, debug_names): Delete.
(return_types, tdefaults, styles, argtypes_array): New.
(top level): All methods are delegators.
(print_class): New.
(top level): Print dummy_target and debug_target classes.
* target-delegates.c: Regenerate.
* target-debug.h (target_debug_print_enum_info_proc_what)
(target_debug_print_thread_control_capabilities)
(target_debug_print_thread_info_p): New.
* target.c (dummy_target): Delete.
(the_dummy_target, the_debug_target): New.
(target_stack): Now extern.
(set_targetdebug): Push/unpush debug target.
(default_child_has_all_memory, default_child_has_memory)
(default_child_has_stack, default_child_has_registers)
(default_child_has_execution): Remove target_ops parameter.
(complete_target_initialization): Delete.
(add_target_with_completer): No longer call
complete_target_initialization.
(target_supports_terminal_ours): Use regular delegation.
(update_current_target): Delete.
(push_target): No longer check magic number. Don't call
update_current_target.
(unpush_target): Don't call update_current_target.
(target_is_pushed): No longer check magic number.
(target_require_runnable): Skip for all stratums over
process_stratum.
(target_ops::info_proc): New.
(target_info_proc): Use find_target_at and
find_default_run_target.
(target_supports_disable_randomization): Use regular delegation.
(target_get_osdata): Use find_target_at.
(target_ops::open, target_ops::close, target_ops::can_attach)
(target_ops::attach, target_ops::can_create_inferior)
(target_ops::create_inferior, target_ops::can_run)
(target_can_run): New.
(default_fileio_target): Use regular delegation.
(target_ops::fileio_open, target_ops::fileio_pwrite)
(target_ops::fileio_pread, target_ops::fileio_fstat)
(target_ops::fileio_close, target_ops::fileio_unlink)
(target_ops::fileio_readlink): New.
(target_fileio_open_1, target_fileio_unlink)
(target_fileio_readlink): Always call the target method. Handle
FILEIO_ENOSYS.
(return_zero, return_zero_has_execution): Delete.
(init_dummy_target): Delete.
(dummy_target::dummy_target, dummy_target::shortname)
(dummy_target::longname, dummy_target::doc)
(debug_target::debug_target, debug_target::shortname)
(debug_target::longname, debug_target::doc): New.
(target_supports_delete_record): Use regular delegation.
(setup_target_debug): Delete.
(maintenance_print_target_stack): Skip debug_stratum.
(initialize_targets): Instantiate the_dummy_target and
the_debug_target.
* auxv.c (target_auxv_parse): Remove 'ops' parameter. Adjust to
use target_stack.
(target_auxv_search, fprint_target_auxv): Adjust.
(info_auxv_command): Adjust to use target_stack.
* auxv.h (target_auxv_parse): Remove 'ops' parameter.
* exceptions.c (print_flush): Handle a NULL target_stack.
* regcache.c (target_ops_no_register): Refactor as class with
virtual methods.
* exec.c (exec_target): New class.
(exec_ops): Now an exec_target.
(exec_open, exec_close_1, exec_get_section_table)
(exec_xfer_partial, exec_files_info, exec_has_memory)
(exec_make_note_section): Refactor as exec_target methods.
(exec_file_clear, ignore, exec_remove_breakpoint, init_exec_ops):
Delete.
(exec_target::find_memory_regions): New.
(_initialize_exec): Don't call init_exec_ops.
* gdbcore.h (exec_file_clear): Delete.
* corefile.c (core_target): Delete.
(core_file_command): Adjust.
* corelow.c (core_target): New class.
(the_core_target): New.
(core_close): Remove target_ops parameter.
(core_close_cleanup): Adjust.
(core_target::close): New.
(core_open, core_detach, get_core_registers, core_files_info)
(core_xfer_partial, core_thread_alive, core_read_description)
(core_pid_to_str, core_thread_name, core_has_memory)
(core_has_stack, core_has_registers, core_info_proc): Rework as
core_target methods.
(ignore, core_remove_breakpoint, init_core_ops): Delete.
(_initialize_corelow): Initialize the_core_target.
* gdbcore.h (core_target): Delete.
(the_core_target): New.
* ctf.c: (ctf_target): New class.
(ctf_ops): Now a ctf_target.
(ctf_open, ctf_close, ctf_files_info, ctf_fetch_registers)
(ctf_xfer_partial, ctf_get_trace_state_variable_value)
(ctf_trace_find, ctf_traceframe_info): Refactor as ctf_target
methods.
(init_ctf_ops): Delete.
(_initialize_ctf): Don't call it.
* tracefile-tfile.c (tfile_target): New class.
(tfile_ops): Now a tfile_target.
(tfile_open, tfile_close, tfile_files_info)
(tfile_get_tracepoint_status, tfile_trace_find)
(tfile_fetch_registers, tfile_xfer_partial)
(tfile_get_trace_state_variable_value, tfile_traceframe_info):
Refactor as tfile_target methods.
(tfile_xfer_partial_features): Remove target_ops parameter.
(init_tfile_ops): Delete.
(_initialize_tracefile_tfile): Don't call it.
* tracefile.c (tracefile_has_all_memory, tracefile_has_memory)
(tracefile_has_stack, tracefile_has_registers)
(tracefile_thread_alive, tracefile_get_trace_status): Refactor as
tracefile_target methods.
(init_tracefile_ops): Delete.
(tracefile_target::tracefile_target): New.
* tracefile.h: Include "target.h".
(tracefile_target): New class.
(init_tracefile_ops): Delete.
* spu-multiarch.c (spu_multiarch_target): New class.
(spu_ops): Now a spu_multiarch_target.
(spu_thread_architecture, spu_region_ok_for_hw_watchpoint)
(spu_fetch_registers, spu_store_registers, spu_xfer_partial)
(spu_search_memory, spu_mourn_inferior): Refactor as
spu_multiarch_target methods.
(init_spu_ops): Delete.
(_initialize_spu_multiarch): Remove references to init_spu_ops,
complete_target_initialization.
* ravenscar-thread.c (ravenscar_thread_target): New class.
(ravenscar_ops): Now a ravenscar_thread_target.
(ravenscar_resume, ravenscar_wait, ravenscar_update_thread_list)
(ravenscar_thread_alive, ravenscar_pid_to_str)
(ravenscar_fetch_registers, ravenscar_store_registers)
(ravenscar_prepare_to_store, ravenscar_stopped_by_sw_breakpoint)
(ravenscar_stopped_by_hw_breakpoint)
(ravenscar_stopped_by_watchpoint, ravenscar_stopped_data_address)
(ravenscar_mourn_inferior, ravenscar_core_of_thread)
(ravenscar_get_ada_task_ptid): Refactor as ravenscar_thread_target
methods.
(init_ravenscar_thread_ops): Delete.
(_initialize_ravenscar): Remove references to
init_ravenscar_thread_ops and complete_target_initialization.
* bsd-uthread.c (bsd_uthread_ops_hack): Delete.
(bsd_uthread_target): New class.
(bsd_uthread_ops): Now a bsd_uthread_target.
(bsd_uthread_activate): Adjust to refer to bsd_uthread_ops.
(bsd_uthread_close, bsd_uthread_mourn_inferior)
(bsd_uthread_fetch_registers, bsd_uthread_store_registers)
(bsd_uthread_wait, bsd_uthread_resume, bsd_uthread_thread_alive)
(bsd_uthread_update_thread_list, bsd_uthread_extra_thread_info)
(bsd_uthread_pid_to_str): Refactor as bsd_uthread_target methods.
(bsd_uthread_target): Delete function.
(_initialize_bsd_uthread): Remove reference to
complete_target_initialization.
* bfd-target.c (target_bfd_data): Delete. Fields folded into ...
(target_bfd): ... this new class.
(target_bfd_xfer_partial, target_bfd_get_section_table)
(target_bfd_close): Refactor as target_bfd methods.
(target_bfd::~target_bfd): New.
(target_bfd_reopen): Adjust.
(target_bfd::close): New.
* record-btrace.c (record_btrace_target): New class.
(record_btrace_ops): Now a record_btrace_target.
(record_btrace_open, record_btrace_stop_recording)
(record_btrace_disconnect, record_btrace_close)
(record_btrace_async, record_btrace_info)
(record_btrace_insn_history, record_btrace_insn_history_range)
(record_btrace_insn_history_from, record_btrace_call_history)
(record_btrace_call_history_range)
(record_btrace_call_history_from, record_btrace_record_method)
(record_btrace_is_replaying, record_btrace_will_replay)
(record_btrace_xfer_partial, record_btrace_insert_breakpoint)
(record_btrace_remove_breakpoint, record_btrace_fetch_registers)
(record_btrace_store_registers, record_btrace_prepare_to_store)
(record_btrace_to_get_unwinder)
(record_btrace_to_get_tailcall_unwinder, record_btrace_resume)
(record_btrace_commit_resume, record_btrace_wait)
(record_btrace_stop, record_btrace_can_execute_reverse)
(record_btrace_stopped_by_sw_breakpoint)
(record_btrace_supports_stopped_by_sw_breakpoint)
(record_btrace_stopped_by_hw_breakpoint)
(record_btrace_supports_stopped_by_hw_breakpoint)
(record_btrace_update_thread_list, record_btrace_thread_alive)
(record_btrace_goto_begin, record_btrace_goto_end)
(record_btrace_goto, record_btrace_stop_replaying_all)
(record_btrace_execution_direction)
(record_btrace_prepare_to_generate_core)
(record_btrace_done_generating_core): Refactor as
record_btrace_target methods.
(init_record_btrace_ops): Delete.
(_initialize_record_btrace): Remove reference to
init_record_btrace_ops.
* record-full.c (RECORD_FULL_IS_REPLAY): Adjust to always refer to
the execution_direction global.
(record_full_base_target, record_full_target)
(record_full_core_target): New classes.
(record_full_ops): Now a record_full_target.
(record_full_core_ops): Now a record_full_core_target.
(record_full_target::detach, record_full_target::disconnect)
(record_full_core_target::disconnect)
(record_full_target::mourn_inferior, record_full_target::kill):
New.
(record_full_open, record_full_close, record_full_async): Refactor
as methods of the record_full_base_target class.
(record_full_resume, record_full_commit_resume): Refactor
as methods of the record_full_target class.
(record_full_wait, record_full_stopped_by_watchpoint)
(record_full_stopped_data_address)
(record_full_stopped_by_sw_breakpoint)
(record_full_supports_stopped_by_sw_breakpoint)
(record_full_stopped_by_hw_breakpoint)
(record_full_supports_stopped_by_hw_breakpoint): Refactor as
methods of the record_full_base_target class.
(record_full_store_registers, record_full_xfer_partial)
(record_full_insert_breakpoint, record_full_remove_breakpoint):
Refactor as methods of the record_full_target class.
(record_full_can_execute_reverse, record_full_get_bookmark)
(record_full_goto_bookmark, record_full_execution_direction)
(record_full_record_method, record_full_info, record_full_delete)
(record_full_is_replaying, record_full_will_replay)
(record_full_goto_begin, record_full_goto_end, record_full_goto)
(record_full_stop_replaying): Refactor as methods of the
record_full_base_target class.
(record_full_core_resume, record_full_core_kill)
(record_full_core_fetch_registers)
(record_full_core_prepare_to_store)
(record_full_core_store_registers, record_full_core_xfer_partial)
(record_full_core_insert_breakpoint)
(record_full_core_remove_breakpoint)
(record_full_core_has_execution): Refactor
as methods of the record_full_core_target class.
(record_full_base_target::supports_delete_record): New.
(init_record_full_ops): Delete.
(init_record_full_core_ops): Delete.
(record_full_save): Refactor as method of the
record_full_base_target class.
(_initialize_record_full): Remove references to
init_record_full_ops and init_record_full_core_ops.
* remote.c (remote_target, extended_remote_target): New classes.
(remote_ops): Now a remote_target.
(extended_remote_ops): Now an extended_remote_target.
(remote_insert_fork_catchpoint, remote_remove_fork_catchpoint)
(remote_insert_vfork_catchpoint, remote_remove_vfork_catchpoint)
(remote_insert_exec_catchpoint, remote_remove_exec_catchpoint)
(remote_pass_signals, remote_set_syscall_catchpoint)
(remote_program_signals, )
(remote_thread_always_alive): Remove target_ops parameter.
(remote_thread_alive, remote_thread_name)
(remote_update_thread_list, remote_threads_extra_info)
(remote_static_tracepoint_marker_at)
(remote_static_tracepoint_markers_by_strid)
(remote_get_ada_task_ptid, remote_close, remote_start_remote)
(remote_open): Refactor as methods of remote_target.
(extended_remote_open, extended_remote_detach)
(extended_remote_attach, extended_remote_post_attach):
(extended_remote_supports_disable_randomization)
(extended_remote_create_inferior): : Refactor as method of
extended_remote_target.
(remote_set_permissions, remote_open_1, remote_detach)
(remote_follow_fork, remote_follow_exec, remote_disconnect)
(remote_resume, remote_commit_resume, remote_stop)
(remote_interrupt, remote_pass_ctrlc, remote_terminal_inferior)
(remote_terminal_ours, remote_wait, remote_fetch_registers)
(remote_prepare_to_store, remote_store_registers)
(remote_flash_erase, remote_flash_done, remote_files_info)
(remote_kill, remote_mourn, remote_insert_breakpoint)
(remote_remove_breakpoint, remote_insert_watchpoint)
(remote_watchpoint_addr_within_range)
(remote_remove_watchpoint, remote_region_ok_for_hw_watchpoint)
(remote_check_watch_resources, remote_stopped_by_sw_breakpoint)
(remote_supports_stopped_by_sw_breakpoint)
(remote_stopped_by_hw_breakpoint)
(remote_supports_stopped_by_hw_breakpoint)
(remote_stopped_by_watchpoint, remote_stopped_data_address)
(remote_insert_hw_breakpoint, remote_remove_hw_breakpoint)
(remote_verify_memory): Refactor as methods of remote_target.
(remote_write_qxfer, remote_read_qxfer): Remove target_ops
parameter.
(remote_xfer_partial, remote_get_memory_xfer_limit)
(remote_search_memory, remote_rcmd, remote_memory_map)
(remote_pid_to_str, remote_get_thread_local_address)
(remote_get_tib_address, remote_read_description): Refactor as
methods of remote_target.
(remote_target::fileio_open, remote_target::fileio_pwrite)
(remote_target::fileio_pread, remote_target::fileio_close): New.
(remote_hostio_readlink, remote_hostio_fstat)
(remote_filesystem_is_local, remote_can_execute_reverse)
(remote_supports_non_stop, remote_supports_disable_randomization)
(remote_supports_multi_process, remote_supports_cond_breakpoints)
(remote_supports_enable_disable_tracepoint)
(remote_supports_string_tracing)
(remote_can_run_breakpoint_commands, remote_trace_init)
(remote_download_tracepoint, remote_can_download_tracepoint)
(remote_download_trace_state_variable, remote_enable_tracepoint)
(remote_disable_tracepoint, remote_trace_set_readonly_regions)
(remote_trace_start, remote_get_trace_status)
(remote_get_tracepoint_status, remote_trace_stop)
(remote_trace_find, remote_get_trace_state_variable_value)
(remote_save_trace_data, remote_get_raw_trace_data)
(remote_set_disconnected_tracing, remote_core_of_thread)
(remote_set_circular_trace_buffer, remote_traceframe_info)
(remote_get_min_fast_tracepoint_insn_len)
(remote_set_trace_buffer_size, remote_set_trace_notes)
(remote_use_agent, remote_can_use_agent, remote_enable_btrace)
(remote_disable_btrace, remote_teardown_btrace)
(remote_read_btrace, remote_btrace_conf)
(remote_augmented_libraries_svr4_read, remote_load)
(remote_pid_to_exec_file, remote_can_do_single_step)
(remote_execution_direction, remote_thread_handle_to_thread_info):
Refactor as methods of remote_target.
(init_remote_ops, init_extended_remote_ops): Delete.
(remote_can_async_p, remote_is_async_p, remote_async)
(remote_thread_events, remote_upload_tracepoints)
(remote_upload_trace_state_variables): Refactor as methods of
remote_target.
(_initialize_remote): Remove references to init_remote_ops and
init_extended_remote_ops.
* remote-sim.c (gdbsim_target): New class.
(gdbsim_fetch_register, gdbsim_store_register, gdbsim_kill)
(gdbsim_load, gdbsim_create_inferior, gdbsim_open, gdbsim_close)
(gdbsim_detach, gdbsim_resume, gdbsim_interrupt)
(gdbsim_wait, gdbsim_prepare_to_store, gdbsim_xfer_partial)
(gdbsim_files_info, gdbsim_mourn_inferior, gdbsim_thread_alive)
(gdbsim_pid_to_str, gdbsim_has_all_memory, gdbsim_has_memory):
Refactor as methods of gdbsim_target.
(gdbsim_ops): Now a gdbsim_target.
(init_gdbsim_ops): Delete.
(gdbsim_cntrl_c): Adjust.
(_initialize_remote_sim): Remove reference to init_gdbsim_ops.
* amd64-linux-nat.c (amd64_linux_nat_target): New class.
(the_amd64_linux_nat_target): New.
(amd64_linux_fetch_inferior_registers)
(amd64_linux_store_inferior_registers): Refactor as methods of
amd64_linux_nat_target.
(_initialize_amd64_linux_nat): Adjust. Set linux_target.
* i386-linux-nat.c: Don't include "linux-nat.h".
(i386_linux_nat_target): New class.
(the_i386_linux_nat_target): New.
(i386_linux_fetch_inferior_registers)
(i386_linux_store_inferior_registers, i386_linux_resume): Refactor
as methods of i386_linux_nat_target.
(_initialize_i386_linux_nat): Adjust. Set linux_target.
* inf-child.c (inf_child_ops): Delete.
(inf_child_fetch_inferior_registers)
(inf_child_store_inferior_registers): Delete.
(inf_child_post_attach, inf_child_prepare_to_store): Refactor as
methods of inf_child_target.
(inf_child_target::supports_terminal_ours)
(inf_child_target::terminal_init)
(inf_child_target::terminal_inferior)
(inf_child_target::terminal_ours_for_output)
(inf_child_target::terminal_ours, inf_child_target::interrupt)
(inf_child_target::pass_ctrlc, inf_child_target::terminal_info):
New.
(inf_child_open, inf_child_disconnect, inf_child_close)
(inf_child_mourn_inferior, inf_child_maybe_unpush_target)
(inf_child_post_startup_inferior, inf_child_can_run)
(inf_child_pid_to_exec_file): Refactor as methods of
inf_child_target.
(inf_child_follow_fork): Delete.
(inf_child_target::can_create_inferior)
(inf_child_target::can_attach): New.
(inf_child_target::has_all_memory, inf_child_target::has_memory)
(inf_child_target::has_stack, inf_child_target::has_registers)
(inf_child_target::has_execution): New.
(inf_child_fileio_open, inf_child_fileio_pwrite)
(inf_child_fileio_pread, inf_child_fileio_fstat)
(inf_child_fileio_close, inf_child_fileio_unlink)
(inf_child_fileio_readlink, inf_child_use_agent)
(inf_child_can_use_agent): Refactor as methods of
inf_child_target.
(return_zero, inf_child_target): Delete.
(inf_child_target::inf_child_target): New.
* inf-child.h: Include "target.h".
(inf_child_target): Delete function prototype.
(inf_child_target): New class.
(inf_child_open_target, inf_child_mourn_inferior)
(inf_child_maybe_unpush_target): Delete.
* inf-ptrace.c (inf_ptrace_target::~inf_ptrace_target): New.
(inf_ptrace_follow_fork, inf_ptrace_insert_fork_catchpoint)
(inf_ptrace_remove_fork_catchpoint, inf_ptrace_create_inferior)
(inf_ptrace_post_startup_inferior, inf_ptrace_mourn_inferior)
(inf_ptrace_attach, inf_ptrace_post_attach, inf_ptrace_detach)
(inf_ptrace_detach_success, inf_ptrace_kill, inf_ptrace_resume)
(inf_ptrace_wait, inf_ptrace_xfer_partial)
(inf_ptrace_thread_alive, inf_ptrace_files_info)
(inf_ptrace_pid_to_str, inf_ptrace_auxv_parse): Refactor as
methods of inf_ptrace_target.
(inf_ptrace_target): Delete function.
* inf-ptrace.h: Include "inf-child.h".
(inf_ptrace_target): Delete function declaration.
(inf_ptrace_target): New class.
(inf_ptrace_trad_target, inf_ptrace_detach_success): Delete.
* linux-nat.c (linux_target): New.
(linux_ops, linux_ops_saved, super_xfer_partial): Delete.
(linux_nat_target::~linux_nat_target): New.
(linux_child_post_attach, linux_child_post_startup_inferior)
(linux_child_follow_fork, linux_child_insert_fork_catchpoint)
(linux_child_remove_fork_catchpoint)
(linux_child_insert_vfork_catchpoint)
(linux_child_remove_vfork_catchpoint)
(linux_child_insert_exec_catchpoint)
(linux_child_remove_exec_catchpoint)
(linux_child_set_syscall_catchpoint, linux_nat_pass_signals)
(linux_nat_create_inferior, linux_nat_attach, linux_nat_detach)
(linux_nat_resume, linux_nat_stopped_by_watchpoint)
(linux_nat_stopped_data_address)
(linux_nat_stopped_by_sw_breakpoint)
(linux_nat_supports_stopped_by_sw_breakpoint)
(linux_nat_stopped_by_hw_breakpoint)
(linux_nat_supports_stopped_by_hw_breakpoint, linux_nat_wait)
(linux_nat_kill, linux_nat_mourn_inferior)
(linux_nat_xfer_partial, linux_nat_thread_alive)
(linux_nat_update_thread_list, linux_nat_pid_to_str)
(linux_nat_thread_name, linux_child_pid_to_exec_file)
(linux_child_static_tracepoint_markers_by_strid)
(linux_nat_is_async_p, linux_nat_can_async_p)
(linux_nat_supports_non_stop, linux_nat_always_non_stop_p)
(linux_nat_supports_multi_process)
(linux_nat_supports_disable_randomization, linux_nat_async)
(linux_nat_stop, linux_nat_close, linux_nat_thread_address_space)
(linux_nat_core_of_thread, linux_nat_filesystem_is_local)
(linux_nat_fileio_open, linux_nat_fileio_readlink)
(linux_nat_fileio_unlink, linux_nat_thread_events): Refactor as
methods of linux_nat_target.
(linux_nat_wait_1, linux_xfer_siginfo, linux_proc_xfer_partial)
(linux_proc_xfer_spu, linux_nat_xfer_osdata): Remove target_ops
parameter.
(check_stopped_by_watchpoint): Adjust.
(linux_xfer_partial): Delete.
(linux_target_install_ops, linux_target, linux_nat_add_target):
Delete.
(linux_nat_target::linux_nat_target): New.
* linux-nat.h: Include "inf-ptrace.h".
(linux_nat_target): New.
(linux_target, linux_target_install_ops, linux_nat_add_target):
Delete function declarations.
(linux_target): Declare global.
* linux-thread-db.c (thread_db_target): New.
(thread_db_target::thread_db_target): New.
(thread_db_ops): Delete.
(the_thread_db_target): New.
(thread_db_detach, thread_db_wait, thread_db_mourn_inferior)
(thread_db_update_thread_list, thread_db_pid_to_str)
(thread_db_extra_thread_info)
(thread_db_thread_handle_to_thread_info)
(thread_db_get_thread_local_address, thread_db_get_ada_task_ptid)
(thread_db_resume): Refactor as methods of thread_db_target.
(init_thread_db_ops): Delete.
(_initialize_thread_db): Remove reference to init_thread_db_ops.
* x86-linux-nat.c: Don't include "linux-nat.h".
(super_post_startup_inferior): Delete.
(x86_linux_nat_target::~x86_linux_nat_target): New.
(x86_linux_child_post_startup_inferior)
(x86_linux_read_description, x86_linux_enable_btrace)
(x86_linux_disable_btrace, x86_linux_teardown_btrace)
(x86_linux_read_btrace, x86_linux_btrace_conf): Refactor as
methods of x86_linux_nat_target.
(x86_linux_create_target): Delete. Bits folded ...
(x86_linux_add_target): ... here. Now takes a linux_nat_target
pointer.
* x86-linux-nat.h: Include "linux-nat.h" and "x86-nat.h".
(x86_linux_nat_target): New class.
(x86_linux_create_target): Delete.
(x86_linux_add_target): Now takes a linux_nat_target pointer.
* x86-nat.c (x86_insert_watchpoint, x86_remove_watchpoint)
(x86_region_ok_for_watchpoint, x86_stopped_data_address)
(x86_stopped_by_watchpoint, x86_insert_hw_breakpoint)
(x86_remove_hw_breakpoint, x86_can_use_hw_breakpoint)
(x86_stopped_by_hw_breakpoint): Remove target_ops parameter and
make extern.
(x86_use_watchpoints): Delete.
* x86-nat.h: Include "breakpoint.h" and "target.h".
(x86_use_watchpoints): Delete.
(x86_can_use_hw_breakpoint, x86_region_ok_for_hw_watchpoint)
(x86_stopped_by_watchpoint, x86_stopped_data_address)
(x86_insert_watchpoint, x86_remove_watchpoint)
(x86_insert_hw_breakpoint, x86_remove_hw_breakpoint)
(x86_stopped_by_hw_breakpoint): New declarations.
(x86_nat_target): New template class.
* ppc-linux-nat.c (ppc_linux_nat_target): New class.
(the_ppc_linux_nat_target): New.
(ppc_linux_fetch_inferior_registers)
(ppc_linux_can_use_hw_breakpoint)
(ppc_linux_region_ok_for_hw_watchpoint)
(ppc_linux_ranged_break_num_registers)
(ppc_linux_insert_hw_breakpoint, ppc_linux_remove_hw_breakpoint)
(ppc_linux_insert_mask_watchpoint)
(ppc_linux_remove_mask_watchpoint)
(ppc_linux_can_accel_watchpoint_condition)
(ppc_linux_insert_watchpoint, ppc_linux_remove_watchpoint)
(ppc_linux_stopped_data_address, ppc_linux_stopped_by_watchpoint)
(ppc_linux_watchpoint_addr_within_range)
(ppc_linux_masked_watch_num_registers)
(ppc_linux_store_inferior_registers, ppc_linux_auxv_parse)
(ppc_linux_read_description): Refactor as methods of
ppc_linux_nat_target.
(_initialize_ppc_linux_nat): Adjust. Set linux_target.
* procfs.c (procfs_xfer_partial): Delete forward declaration.
(procfs_target): New class.
(the_procfs_target): New.
(procfs_target): Delete function.
(procfs_auxv_parse, procfs_attach, procfs_detach)
(procfs_fetch_registers, procfs_store_registers, procfs_wait)
(procfs_xfer_partial, procfs_resume, procfs_pass_signals)
(procfs_files_info, procfs_kill_inferior, procfs_mourn_inferior)
(procfs_create_inferior, procfs_update_thread_list)
(procfs_thread_alive, procfs_pid_to_str)
(procfs_can_use_hw_breakpoint, procfs_stopped_by_watchpoint)
(procfs_stopped_data_address, procfs_insert_watchpoint)
(procfs_remove_watchpoint, procfs_region_ok_for_hw_watchpoint)
(proc_find_memory_regions, procfs_info_proc)
(procfs_make_note_section): Refactor as methods of procfs_target.
(_initialize_procfs): Adjust.
* sol-thread.c (sol_thread_target): New class.
(sol_thread_ops): Now a sol_thread_target.
(sol_thread_detach, sol_thread_resume, sol_thread_wait)
(sol_thread_fetch_registers, sol_thread_store_registers)
(sol_thread_xfer_partial, sol_thread_mourn_inferior)
(sol_thread_alive, solaris_pid_to_str, sol_update_thread_list)
(sol_get_ada_task_ptid): Refactor as methods of sol_thread_target.
(init_sol_thread_ops): Delete.
(_initialize_sol_thread): Adjust. Remove references to
init_sol_thread_ops and complete_target_initialization.
* windows-nat.c (windows_nat_target): New class.
(windows_fetch_inferior_registers)
(windows_store_inferior_registers, windows_resume, windows_wait)
(windows_attach, windows_detach, windows_pid_to_exec_file)
(windows_files_info, windows_create_inferior)
(windows_mourn_inferior, windows_interrupt, windows_kill_inferior)
(windows_close, windows_pid_to_str, windows_xfer_partial)
(windows_get_tib_address, windows_get_ada_task_ptid)
(windows_thread_name, windows_thread_alive): Refactor as
windows_nat_target methods.
(do_initial_windows_stuff): Adjust.
(windows_target): Delete function.
(_initialize_windows_nat): Adjust.
* darwin-nat.c (darwin_resume, darwin_wait_to, darwin_interrupt)
(darwin_mourn_inferior, darwin_kill_inferior)
(darwin_create_inferior, darwin_attach, darwin_detach)
(darwin_pid_to_str, darwin_thread_alive, darwin_xfer_partial)
(darwin_pid_to_exec_file, darwin_get_ada_task_ptid)
(darwin_supports_multi_process): Refactor as darwin_nat_target
methods.
(darwin_resume_to, darwin_files_info): Delete.
(_initialize_darwin_inferior): Rename to ...
(_initialize_darwin_nat): ... this. Adjust to C++ification.
* darwin-nat.h: Include "inf-child.h".
(darwin_nat_target): New class.
(darwin_complete_target): Delete.
* i386-darwin-nat.c (i386_darwin_nat_target): New class.
(darwin_target): New.
(i386_darwin_fetch_inferior_registers)
(i386_darwin_store_inferior_registers): Refactor as methods of
darwin_nat_target.
(darwin_complete_target): Delete, with ...
(_initialize_i386_darwin_nat): ... bits factored out here.
* alpha-linux-nat.c (alpha_linux_nat_target): New class.
(the_alpha_linux_nat_target): New.
(alpha_linux_register_u_offset): Refactor as
alpha_linux_nat_target method.
(_initialize_alpha_linux_nat): Adjust.
* linux-nat-trad.c (inf_ptrace_register_u_offset): Delete.
(inf_ptrace_fetch_register, inf_ptrace_fetch_registers)
(inf_ptrace_store_register, inf_ptrace_store_registers): Refact as
methods of linux_nat_trad_target.
(linux_trad_target): Delete.
* linux-nat-trad.h (linux_trad_target): Delete function.
(linux_nat_trad_target): New class.
* mips-linux-nat.c (mips_linux_nat_target): New class.
(super_fetch_registers, super_store_registers, super_close):
Delete.
(the_mips_linux_nat_target): New.
(mips64_linux_regsets_fetch_registers)
(mips64_linux_regsets_store_registers)
(mips64_linux_fetch_registers, mips64_linux_store_registers)
(mips_linux_register_u_offset, mips_linux_read_description)
(mips_linux_can_use_hw_breakpoint)
(mips_linux_stopped_by_watchpoint)
(mips_linux_stopped_data_address)
(mips_linux_region_ok_for_hw_watchpoint)
(mips_linux_insert_watchpoint, mips_linux_remove_watchpoint)
(mips_linux_close): Refactor as methods of mips_linux_nat.
(_initialize_mips_linux_nat): Adjust to C++ification.
* aix-thread.c (aix_thread_target): New class.
(aix_thread_ops): Now an aix_thread_target.
(aix_thread_detach, aix_thread_resume, aix_thread_wait)
(aix_thread_fetch_registers, aix_thread_store_registers)
(aix_thread_xfer_partial, aix_thread_mourn_inferior)
(aix_thread_thread_alive, aix_thread_pid_to_str)
(aix_thread_extra_thread_info, aix_thread_get_ada_task_ptid):
Refactor as methods of aix_thread_target.
(init_aix_thread_ops): Delete.
(_initialize_aix_thread): Remove references to init_aix_thread_ops
and complete_target_initialization.
* rs6000-nat.c (rs6000_xfer_shared_libraries): Delete.
(rs6000_nat_target): New class.
(the_rs6000_nat_target): New.
(rs6000_fetch_inferior_registers, rs6000_store_inferior_registers)
(rs6000_xfer_partial, rs6000_wait, rs6000_create_inferior)
(rs6000_xfer_shared_libraries): Refactor as rs6000_nat_target methods.
(super_create_inferior): Delete.
(_initialize_rs6000_nat): Adjust to C++ification.
* arm-linux-nat.c (arm_linux_nat_target): New class.
(the_arm_linux_nat_target): New.
(arm_linux_fetch_inferior_registers)
(arm_linux_store_inferior_registers, arm_linux_read_description)
(arm_linux_can_use_hw_breakpoint, arm_linux_insert_hw_breakpoint)
(arm_linux_remove_hw_breakpoint)
(arm_linux_region_ok_for_hw_watchpoint)
(arm_linux_insert_watchpoint, arm_linux_remove_watchpoint)
(arm_linux_stopped_data_address, arm_linux_stopped_by_watchpoint)
(arm_linux_watchpoint_addr_within_range): Refactor as methods of
arm_linux_nat_target.
(_initialize_arm_linux_nat): Adjust to C++ification.
* aarch64-linux-nat.c (aarch64_linux_nat_target): New class.
(the_aarch64_linux_nat_target): New.
(aarch64_linux_fetch_inferior_registers)
(aarch64_linux_store_inferior_registers)
(aarch64_linux_child_post_startup_inferior)
(aarch64_linux_read_description)
(aarch64_linux_can_use_hw_breakpoint)
(aarch64_linux_insert_hw_breakpoint)
(aarch64_linux_remove_hw_breakpoint)
(aarch64_linux_insert_watchpoint, aarch64_linux_remove_watchpoint)
(aarch64_linux_region_ok_for_hw_watchpoint)
(aarch64_linux_stopped_data_address)
(aarch64_linux_stopped_by_watchpoint)
(aarch64_linux_watchpoint_addr_within_range)
(aarch64_linux_can_do_single_step): Refactor as methods of
aarch64_linux_nat_target.
(super_post_startup_inferior): Delete.
(_initialize_aarch64_linux_nat): Adjust to C++ification.
* hppa-linux-nat.c (hppa_linux_nat_target): New class.
(the_hppa_linux_nat_target): New.
(hppa_linux_fetch_inferior_registers)
(hppa_linux_store_inferior_registers): Refactor as methods of
hppa_linux_nat_target.
(_initialize_hppa_linux_nat): Adjust to C++ification.
* ia64-linux-nat.c (ia64_linux_nat_target): New class.
(the_ia64_linux_nat_target): New.
(ia64_linux_insert_watchpoint, ia64_linux_remove_watchpoint)
(ia64_linux_stopped_data_address)
(ia64_linux_stopped_by_watchpoint, ia64_linux_fetch_registers)
(ia64_linux_store_registers, ia64_linux_xfer_partial): Refactor as
ia64_linux_nat_target methods.
(super_xfer_partial): Delete.
(_initialize_ia64_linux_nat): Adjust to C++ification.
* m32r-linux-nat.c (m32r_linux_nat_target): New class.
(the_m32r_linux_nat_target): New.
(m32r_linux_fetch_inferior_registers)
(m32r_linux_store_inferior_registers): Refactor as
m32r_linux_nat_target methods.
(_initialize_m32r_linux_nat): Adjust to C++ification.
* m68k-linux-nat.c (m68k_linux_nat_target): New class.
(the_m68k_linux_nat_target): New.
(m68k_linux_fetch_inferior_registers)
(m68k_linux_store_inferior_registers): Refactor as
m68k_linux_nat_target methods.
(_initialize_m68k_linux_nat): Adjust to C++ification.
* s390-linux-nat.c (s390_linux_nat_target): New class.
(the_s390_linux_nat_target): New.
(s390_linux_fetch_inferior_registers)
(s390_linux_store_inferior_registers, s390_stopped_by_watchpoint)
(s390_insert_watchpoint, s390_remove_watchpoint)
(s390_can_use_hw_breakpoint, s390_insert_hw_breakpoint)
(s390_remove_hw_breakpoint, s390_region_ok_for_hw_watchpoint)
(s390_auxv_parse, s390_read_description): Refactor as methods of
s390_linux_nat_target.
(_initialize_s390_nat): Adjust to C++ification.
* sparc-linux-nat.c (sparc_linux_nat_target): New class.
(the_sparc_linux_nat_target): New.
(_initialize_sparc_linux_nat): Adjust to C++ification.
* sparc-nat.c (sparc_fetch_inferior_registers)
(sparc_store_inferior_registers): Remove target_ops parameter.
* sparc-nat.h (sparc_fetch_inferior_registers)
(sparc_store_inferior_registers): Remove target_ops parameter.
* sparc64-linux-nat.c (sparc64_linux_nat_target): New class.
(the_sparc64_linux_nat_target): New.
(_initialize_sparc64_linux_nat): Adjust to C++ification.
* spu-linux-nat.c (spu_linux_nat_target): New class.
(the_spu_linux_nat_target): New.
(spu_child_post_startup_inferior, spu_child_post_attach)
(spu_child_wait, spu_fetch_inferior_registers)
(spu_store_inferior_registers, spu_xfer_partial)
(spu_can_use_hw_breakpoint): Refactor as spu_linux_nat_target
methods.
(_initialize_spu_nat): Adjust to C++ification.
* tilegx-linux-nat.c (tilegx_linux_nat_target): New class.
(the_tilegx_linux_nat_target): New.
(fetch_inferior_registers, store_inferior_registers):
Refactor as methods.
(_initialize_tile_linux_nat): Adjust to C++ification.
* xtensa-linux-nat.c (xtensa_linux_nat_target): New class.
(the_xtensa_linux_nat_target): New.
(xtensa_linux_fetch_inferior_registers)
(xtensa_linux_store_inferior_registers): Refactor as
xtensa_linux_nat_target methods.
(_initialize_xtensa_linux_nat): Adjust to C++ification.
* fbsd-nat.c (USE_SIGTRAP_SIGINFO): Delete.
(fbsd_pid_to_exec_file, fbsd_find_memory_regions)
(fbsd_find_memory_regions, fbsd_info_proc, fbsd_xfer_partial)
(fbsd_thread_alive, fbsd_pid_to_str, fbsd_thread_name)
(fbsd_update_thread_list, fbsd_resume, fbsd_wait)
(fbsd_stopped_by_sw_breakpoint)
(fbsd_supports_stopped_by_sw_breakpoint, fbsd_follow_fork)
(fbsd_insert_fork_catchpoint, fbsd_remove_fork_catchpoint)
(fbsd_insert_vfork_catchpoint, fbsd_remove_vfork_catchpoint)
(fbsd_post_startup_inferior, fbsd_post_attach)
(fbsd_insert_exec_catchpoint, fbsd_remove_exec_catchpoint)
(fbsd_set_syscall_catchpoint)
(super_xfer_partial, super_resume, super_wait)
(fbsd_supports_stopped_by_hw_breakpoint): Delete.
(fbsd_handle_debug_trap): Remove target_ops parameter.
(fbsd_nat_add_target): Delete.
* fbsd-nat.h: Include "inf-ptrace.h".
(fbsd_nat_add_target): Delete.
(USE_SIGTRAP_SIGINFO): Define.
(fbsd_nat_target): New class.
* amd64-bsd-nat.c (amd64bsd_fetch_inferior_registers)
(amd64bsd_store_inferior_registers): Remove target_ops parameter.
(amd64bsd_target): Delete.
* amd64-bsd-nat.h: New file.
* amd64-fbsd-nat.c: Include "amd64-bsd-nat.h" instead of
"x86-bsd-nat.h".
(amd64_fbsd_nat_target): New class.
(the_amd64_fbsd_nat_target): New.
(amd64fbsd_read_description): Refactor as method of
amd64_fbsd_nat_target.
(amd64_fbsd_nat_target::supports_stopped_by_hw_breakpoint): New.
(_initialize_amd64fbsd_nat): Adjust to C++ification.
* amd64-nat.h (amd64bsd_target): Delete function declaration.
* i386-bsd-nat.c (i386bsd_fetch_inferior_registers)
(i386bsd_store_inferior_registers): Remove target_ops parameter.
(i386bsd_target): Delete.
* i386-bsd-nat.h (i386bsd_target): Delete function declaration.
(i386bsd_fetch_inferior_registers)
(i386bsd_store_inferior_registers): Declare.
(i386_bsd_nat_target): New class.
* i386-fbsd-nat.c (i386_fbsd_nat_target): New class.
(the_i386_fbsd_nat_target): New.
(i386fbsd_resume, i386fbsd_read_description): Refactor as
i386_fbsd_nat_target methods.
(i386_fbsd_nat_target::supports_stopped_by_hw_breakpoint): New.
(_initialize_i386fbsd_nat): Adjust to C++ification.
* x86-bsd-nat.c (super_mourn_inferior): Delete.
(x86bsd_mourn_inferior, x86bsd_target): Delete.
(_initialize_x86_bsd_nat): Adjust to C++ification.
* x86-bsd-nat.h: Include "x86-nat.h".
(x86bsd_target): Delete declaration.
(x86bsd_nat_target): New class.
* aarch64-fbsd-nat.c (aarch64_fbsd_nat_target): New class.
(the_aarch64_fbsd_nat_target): New.
(aarch64_fbsd_fetch_inferior_registers)
(aarch64_fbsd_store_inferior_registers): Refactor as methods of
aarch64_fbsd_nat_target.
(_initialize_aarch64_fbsd_nat): Adjust to C++ification.
* alpha-bsd-nat.c (alpha_bsd_nat_target): New class.
(the_alpha_bsd_nat_target): New.
(alphabsd_fetch_inferior_registers)
(alphabsd_store_inferior_registers): Refactor as
alpha_bsd_nat_target methods.
(_initialize_alphabsd_nat): Refactor as methods of
alpha_bsd_nat_target.
* amd64-nbsd-nat.c: Include "amd64-bsd-nat.h".
(the_amd64_nbsd_nat_target): New.
(_initialize_amd64nbsd_nat): Adjust to C++ification.
* amd64-obsd-nat.c: Include "amd64-bsd-nat.h".
(the_amd64_obsd_nat_target): New.
(_initialize_amd64obsd_nat): Adjust to C++ification.
* arm-fbsd-nat.c (arm_fbsd_nat_target): New.
(the_arm_fbsd_nat_target): New.
(arm_fbsd_fetch_inferior_registers)
(arm_fbsd_store_inferior_registers, arm_fbsd_read_description):
(_initialize_arm_fbsd_nat): Refactor as methods of
arm_fbsd_nat_target.
(_initialize_arm_fbsd_nat): Adjust to C++ification.
* arm-nbsd-nat.c (arm_netbsd_nat_target): New class.
(the_arm_netbsd_nat_target): New.
(armnbsd_fetch_registers, armnbsd_store_registers): Refactor as
arm_netbsd_nat_target.
(_initialize_arm_netbsd_nat): Adjust to C++ification.
* hppa-nbsd-nat.c (hppa_nbsd_nat_target): New class.
(the_hppa_nbsd_nat_target): New.
(hppanbsd_fetch_registers, hppanbsd_store_registers): Refactor as
hppa_nbsd_nat_target methods.
(_initialize_hppanbsd_nat): Adjust to C++ification.
* hppa-obsd-nat.c (hppa_obsd_nat_target): New class.
(the_hppa_obsd_nat_target): New.
(hppaobsd_fetch_registers, hppaobsd_store_registers): Refactor as
methods of hppa_obsd_nat_target.
(_initialize_hppaobsd_nat): Adjust to C++ification. Use
add_target.
* i386-nbsd-nat.c (the_i386_nbsd_nat_target): New.
(_initialize_i386nbsd_nat): Adjust to C++ification. Use
add_target.
* i386-obsd-nat.c (the_i386_obsd_nat_target): New.
(_initialize_i386obsd_nat): Use add_target.
* m68k-bsd-nat.c (m68k_bsd_nat_target): New class.
(the_m68k_bsd_nat_target): New.
(m68kbsd_fetch_inferior_registers)
(m68kbsd_store_inferior_registers): Refactor as methods of
m68k_bsd_nat_target.
(_initialize_m68kbsd_nat): Adjust to C++ification.
* mips-fbsd-nat.c (mips_fbsd_nat_target): New class.
(the_mips_fbsd_nat_target): New.
(mips_fbsd_fetch_inferior_registers)
(mips_fbsd_store_inferior_registers): Refactor as methods of
mips_fbsd_nat_target.
(_initialize_mips_fbsd_nat): Adjust to C++ification. Use
add_target.
* mips-nbsd-nat.c (mips_nbsd_nat_target): New class.
(the_mips_nbsd_nat_target): New.
(mipsnbsd_fetch_inferior_registers)
(mipsnbsd_store_inferior_registers): Refactor as methods of
mips_nbsd_nat_target.
(_initialize_mipsnbsd_nat): Adjust to C++ification.
* mips64-obsd-nat.c (mips64_obsd_nat_target): New class.
(the_mips64_obsd_nat_target): New.
(mips64obsd_fetch_inferior_registers)
(mips64obsd_store_inferior_registers): Refactor as methods of
mips64_obsd_nat_target.
(_initialize_mips64obsd_nat): Adjust to C++ification. Use
add_target.
* nbsd-nat.c (nbsd_pid_to_exec_file): Refactor as method of
nbsd_nat_target.
* nbsd-nat.h: Include "inf-ptrace.h".
(nbsd_nat_target): New class.
* obsd-nat.c (obsd_pid_to_str, obsd_update_thread_list)
(obsd_wait): Refactor as methods of obsd_nat_target.
(obsd_add_target): Delete.
* obsd-nat.h: Include "inf-ptrace.h".
(obsd_nat_target): New class.
* ppc-fbsd-nat.c (ppc_fbsd_nat_target): New class.
(the_ppc_fbsd_nat_target): New.
(ppcfbsd_fetch_inferior_registers)
(ppcfbsd_store_inferior_registers): Refactor as methods of
ppc_fbsd_nat_target.
(_initialize_ppcfbsd_nat): Adjust to C++ification. Use
add_target.
* ppc-nbsd-nat.c (ppc_nbsd_nat_target): New class.
(the_ppc_nbsd_nat_target): New.
(ppcnbsd_fetch_inferior_registers)
(ppcnbsd_store_inferior_registers): Refactor as methods of
ppc_nbsd_nat_target.
(_initialize_ppcnbsd_nat): Adjust to C++ification.
* ppc-obsd-nat.c (ppc_obsd_nat_target): New class.
(the_ppc_obsd_nat_target): New.
(ppcobsd_fetch_registers, ppcobsd_store_registers): Refactor as
methods of ppc_obsd_nat_target.
(_initialize_ppcobsd_nat): Adjust to C++ification. Use
add_target.
* sh-nbsd-nat.c (sh_nbsd_nat_target): New class.
(the_sh_nbsd_nat_target): New.
(shnbsd_fetch_inferior_registers)
(shnbsd_store_inferior_registers): Refactor as methods of
sh_nbsd_nat_target.
(_initialize_shnbsd_nat): Adjust to C++ification.
* sparc-nat.c (sparc_xfer_wcookie): Make extern.
(inf_ptrace_xfer_partial): Delete.
(sparc_xfer_partial, sparc_target): Delete.
* sparc-nat.h (sparc_fetch_inferior_registers)
(sparc_store_inferior_registers, sparc_xfer_wcookie): Declare.
(sparc_target): Delete function declaration.
(sparc_target): New template class.
* sparc-nbsd-nat.c (the_sparc_nbsd_nat_target): New.
(_initialize_sparcnbsd_nat): Adjust to C++ification.
* sparc64-fbsd-nat.c (the_sparc64_fbsd_nat_target): New.
(_initialize_sparc64fbsd_nat): Adjust to C++ification. Use
add_target.
* sparc64-nbsd-nat.c (the_sparc64_nbsd_nat_target): New.
(_initialize_sparc64nbsd_nat): Adjust to C++ification.
* sparc64-obsd-nat.c (the_sparc64_obsd_nat_target): New.
(_initialize_sparc64obsd_nat): Adjust to C++ification. Use
add_target.
* vax-bsd-nat.c (vax_bsd_nat_target): New class.
(the_vax_bsd_nat_target): New.
(vaxbsd_fetch_inferior_registers)
(vaxbsd_store_inferior_registers): Refactor as vax_bsd_nat_target
methods.
(_initialize_vaxbsd_nat): Adjust to C++ification.
* bsd-kvm.c (bsd_kvm_target): New class.
(bsd_kvm_ops): Now a bsd_kvm_target.
(bsd_kvm_open, bsd_kvm_close, bsd_kvm_xfer_partial)
(bsd_kvm_files_info, bsd_kvm_fetch_registers)
(bsd_kvm_thread_alive, bsd_kvm_pid_to_str): Refactor as methods of
bsd_kvm_target.
(bsd_kvm_return_one): Delete.
(bsd_kvm_add_target): Adjust to C++ification.
* nto-procfs.c (nto_procfs_target, nto_procfs_target_native)
(nto_procfs_target_procfs): New classes.
(procfs_open_1, procfs_thread_alive, procfs_update_thread_list)
(procfs_files_info, procfs_pid_to_exec_file, procfs_attach)
(procfs_post_attach, procfs_wait, procfs_fetch_registers)
(procfs_xfer_partial, procfs_detach, procfs_insert_breakpoint)
(procfs_remove_breakpoint, procfs_insert_hw_breakpoint)
(procfs_remove_hw_breakpoint, procfs_resume)
(procfs_mourn_inferior, procfs_create_inferior, procfs_interrupt)
(procfs_kill_inferior, procfs_store_registers)
(procfs_pass_signals, procfs_pid_to_str, procfs_can_run): Refactor
as methods of nto_procfs_target.
(nto_procfs_ops): Now an nto_procfs_target_procfs.
(nto_native_ops): Delete.
(procfs_open, procfs_native_open): Delete.
(nto_native_ops): Now an nto_procfs_target_native.
(init_procfs_targets): Adjust to C++ification.
(procfs_can_use_hw_breakpoint, procfs_remove_hw_watchpoint)
(procfs_insert_hw_watchpoint, procfs_stopped_by_watchpoint):
Refactor as methods of nto_procfs_target.
* go32-nat.c (go32_nat_target): New class.
(the_go32_nat_target): New.
(go32_attach, go32_resume, go32_wait, go32_fetch_registers)
(go32_store_registers, go32_xfer_partial, go32_files_info)
(go32_kill_inferior, go32_create_inferior, go32_mourn_inferior)
(go32_terminal_init, go32_terminal_info, go32_terminal_inferior)
(go32_terminal_ours, go32_pass_ctrlc, go32_thread_alive)
(go32_pid_to_str): Refactor as methods of go32_nat_target.
(go32_target): Delete.
(_initialize_go32_nat): Adjust to C++ification.
* gnu-nat.c (gnu_wait, gnu_resume, gnu_kill_inferior)
(gnu_mourn_inferior, gnu_create_inferior, gnu_attach, gnu_detach)
(gnu_stop, gnu_thread_alive, gnu_xfer_partial)
(gnu_find_memory_regions, gnu_pid_to_str): Refactor as methods of
gnu_nat_target.
(gnu_target): Delete.
* gnu-nat.h (gnu_target): Delete.
(gnu_nat_target): New class.
* i386-gnu-nat.c (gnu_base_target): New.
(i386_gnu_nat_target): New class.
(the_i386_gnu_nat_target): New.
(_initialize_i386gnu_nat): Adjust to C++ification.
gdb/testsuite/ChangeLog:
2018-05-02 Pedro Alves <palves@redhat.com>
* gdb.base/breakpoint-in-ro-region.exp: Adjust to to_resume and
to_log_command renames.
* gdb.base/sss-bp-on-user-bp-2.exp: Likewise.
|
|
|
Tom Tromey
|
bbfa6f0086 |
Use new_reference for struct value
value_incref returned its argument just as a convenience, which in the end turned out to only be used in precisely the cases where new_reference helps. So, this patch changes value_incref to return void and changes some value-using code to use new_reference. I also noticed that the comments for value_incref and value_decref were swapped, so this patch fixes those. ChangeLog 2018-04-30 Tom Tromey <tom@tromey.com> * varobj.c (install_new_value): Use new_reference. * value.h (value_incref): Return void. Swap intro comment with value_decref. * value.c (set_value_parent): Use new_reference. (value_incref): Return void. Update intro comment. (release_value): Use new_reference. * dwarf2loc.c (dwarf2_evaluate_loc_desc_full): Use new_reference. |
|
Simon Marchi
|
d5f4488f09 |
Add selftests for range_contains and insert_into_bit_range_vector
Add some selftests for these two functions. To to make it easier to compare sequences of ranges, add operator== and operator!= to compare two gdb::array_view, and add operator== in struct range. gdb/ChangeLog: * value.c: Include "selftest.h" and "common/array-view.h". (struct range) <operator ==>: New. (test_ranges_contain): New. (check_ranges_vector): New. (test_insert_into_bit_range_vector): New. (_initialize_values): Register selftests. * common/array-view.h (operator==, operator!=): New. |
|
|
Tom Tromey
|
14c88955a1 |
Change value::contents to be a unique_xmalloc_ptr
This changes value::contents to be a unique_xmalloc_ptr, removing a small bit of manual memory management. gdb/ChangeLog 2018-04-06 Tom Tromey <tom@tromey.com> * value.c (~value): Update. (struct value) <contents>: Now unique_xmalloc_ptr. (value_contents_bits_eq, allocate_value_contents) (value_contents_raw, value_contents_all_raw) (value_contents_for_printing, value_contents_for_printing_const) (set_value_enclosing_type): Update. |
|
|
Tom Tromey
|
0c7e6dd852 |
Remove range_s VEC
This changes the "optimized_out" and "unavailable" VECs in struct value to be std::vectors, and then fixes up all the uses. gdb/ChangeLog 2018-04-06 Tom Tromey <tom@tromey.com> * value.c (range_s): Remove typedef, VEC. (struct range): Add operator<. (range_lessthan): Remove. (ranges_contain): Change type. (~value): Update. (struct value) <unavailable, optimized_out>: Now std::vector. (value_entirely_available) (value_entirely_covered_by_range_vector) (value_entirely_unavailable, value_entirely_optimized_out): Update. (insert_into_bit_range_vector): Change argument type. (find_first_range_overlap): Likewise. (struct ranges_and_idx, value_contents_bits_eq) (require_not_optimized_out, require_available): Update. (ranges_copy_adjusted): Change argument types. (value_optimized_out, value_copy, value_fetch_lazy): Update. |
|
|
Tom Tromey
|
2c8331b987 |
Change value::parent to a value_ref_ptr
This changes value::parent to a value_ref_ptr. This removes a bit of manual reference count management. gdb/ChangeLog 2018-04-06 Tom Tromey <tom@tromey.com> * value.c (~value): Update. (struct value) <parent>: Now a value_ref_ptr. (value_parent, set_value_parent, value_address, value_copy): Update. |
|
|
Tom Tromey
|
466ce3aea9 |
Use new and delete for values
This adds a constructor and destructor to struct value, and then changes value.c to use "new" and "delete". While doing this I noticed a memory leak -- value_decref was not freeing value::optimized_out. This patch fixes this leak. gdb/ChangeLog 2018-04-06 Tom Tromey <tom@tromey.com> * value.c (struct value): Add constructor, destructor, and member initializers. (allocate_value_lazy, value_decref): Update. |
|
|
Tom Tromey
|
062d818d25 |
Remove value::next and value::released
This patch converts all_values to simply hold a list of references to values. Now, there's no need to have a value record whether or not it is released -- there is only a single reference-counting mechanism for values. So, this also removes value::next, value::released, and value_next. gdb/ChangeLog 2018-04-06 Tom Tromey <tom@tromey.com> * value.c (struct value) <released, next>: Remove. (all_values): Now a std::vector. (allocate_value_lazy): Update. (value_next): Remove. (value_mark, value_free_to_mark, release_value) (value_release_to_mark): Update. |
|
|
Tom Tromey
|
a6535de190 |
Remove free_value_chain
This patch changes value_release_to_mark and fetch_subexp_value to return a std::vector of value references, rather than relying on the "next" field that is contained in a struct value. This makes it simpler to reason about the returned values, and also allows for the removal of free_value_chain. gdb/ChangeLog 2018-04-06 Tom Tromey <tom@tromey.com> * value.h (fetch_subexp_value, value_release_to_mark): Update. (free_value_chain): Remove. * value.c (free_value_chain): Remove. (value_release_to_mark): Return a std::vector. * ppc-linux-nat.c (num_memory_accesses): Change "chain" to a std::vector. (check_condition): Update. * eval.c (fetch_subexp_value): Change "val_chain" to a std::vector. * breakpoint.c (update_watchpoint): Update. (can_use_hardware_watchpoint): Change "vals" to a std::vector. |
|
|
Tom Tromey
|
b562120198 |
Remove free_all_values
free_all_values is unused, so this removes it. gdb/ChangeLog 2018-04-06 Tom Tromey <tom@tromey.com> * value.h (free_all_values): Remove. * value.c (free_all_values): Remove. |
|
|
Tom Tromey
|
4d0266a0e0 |
Change value history to use value_ref_ptr
This simplifies the value history implementation by replacing the current data structure with a std::vector, and by making the value history simply hold a reference to each value. gdb/ChangeLog 2018-04-06 Tom Tromey <tom@tromey.com> * value.c (VALUE_HISTORY_CHUNK, struct value_history_chunk) (value_history_chain, value_history_count): Remove. (value_history): New global. (record_latest_value, access_value_history, show_values) (preserve_values): Update. |
|
|
Tom Tromey
|
850645cfe8 |
Change breakpoints to use value_ref_ptr
Now that value_ref_ptr exists, it is possible to simplify breakpoint and bpstat memory management by using a value_ref_ptr rather than manually handling the reference counts. gdb/ChangeLog 2018-04-06 Tom Tromey <tom@tromey.com> * value.c (release_value): Update. * breakpoint.h (struct watchpoint) <val>: Now a value_ref_ptr. (struct bpstats) <val>: Now a value_ref_ptr. * breakpoint.c (update_watchpoint, breakpoint_init_inferior) (~bpstats, bpstats, bpstat_clear_actions, watchpoint_check) (~watchpoint, print_it_watchpoint, watch_command_1) (invalidate_bp_value_on_memory_change): Update. |
|
|
Tom Tromey
|
22bc8444e6 |
Introduce a gdb_ref_ptr specialization for struct value
struct value is internally reference counted and so, while it also has some ownership rules unique to it, it makes sense to use a gdb_ref_ptr when managing it automatically. This patch removes the existing unique_ptr specialization in favor of a reference-counted pointer. It also introduces two other clarifications: 1. Rename value_free to value_decref, which I think is more in line with what the function actually does; and 2. Change release_value to return a gdb_ref_ptr. This change allows us to remove the confusing release_value_or_incref function, primarily by making it much simpler to reason about the result of release_value. gdb/ChangeLog 2018-04-06 Tom Tromey <tom@tromey.com> * varobj.c (varobj_clear_saved_item) (update_dynamic_varobj_children, install_new_value, ~varobj): Update. * value.h (value_incref): Move declaration earlier. (value_decref): Rename from value_free. (struct value_ref_policy): New. (value_ref_ptr): New typedef. (struct value_deleter): Remove. (gdb_value_up): Remove typedef. (release_value): Change return type. (release_value_or_incref): Remove. * value.c (set_value_parent): Update. (value_incref): Change return type. (value_decref): Rename from value_free. (value_free_to_mark, free_all_values, free_value_chain): Update. (release_value): Return value_ref_ptr. (release_value_or_incref): Remove. (record_latest_value, set_internalvar, clear_internalvar): Update. * stack.c (info_frame_command): Don't call value_free. * python/py-value.c (valpy_dealloc, valpy_new) (value_to_value_object): Update. * printcmd.c (do_examine): Update. * opencl-lang.c (lval_func_free_closure): Update. * mi/mi-main.c (register_changed_p): Don't call value_free. * mep-tdep.c (mep_frame_prev_register): Don't call value_free. * m88k-tdep.c (m88k_frame_prev_register): Don't call value_free. * m68hc11-tdep.c (m68hc11_frame_prev_register): Don't call value_free. * guile/scm-value.c (vlscm_free_value_smob) (vlscm_scm_from_value): Update. * frame.c (frame_register_unwind, frame_unwind_register_signed) (frame_unwind_register_unsigned, get_frame_register_bytes) (put_frame_register_bytes): Don't call value_free. * findvar.c (address_from_register): Don't call value_free. * dwarf2read.c (dwarf2_compute_name): Don't call value_free. * dwarf2loc.c (entry_data_value_free_closure) (value_of_dwarf_reg_entry, free_pieced_value_closure) (dwarf2_evaluate_loc_desc_full): Update. * breakpoint.c (update_watchpoint, breakpoint_init_inferior) (~bpstats, bpstats, bpstat_clear_actions, watchpoint_check) (~watchpoint, watch_command_1) (invalidate_bp_value_on_memory_change): Update. * alpha-tdep.c (alpha_register_to_value): Don't call value_free. |
|
|
Tom Tromey
|
15ce8941e7 |
Sign-extend non-bit-fields in unpack_bits_as_long
unpack_bits_as_long is documented as sign-extending its result when the type is signed. However, it was only doing sign-extension in the case where the field was a bitfield -- that is, not when the "bitsize" parameter was 0, indicating the size should be taken from the type. Also, unpack_bits_as_long was incorrectly computing the shift for big-endian architectures for the non-bitfield case. This patch fixes these bugs in a straightforward way. A new selftest is included. 2018-02-26 Tom Tromey <tom@tromey.com> * Makefile.in (SUBDIR_UNITTESTS_SRCS): Add unittests/unpack-selftests.c. * unittests/unpack-selftests.c: New file. * value.c (unpack_bits_as_long): Fix bugs in non-bitfield cases. |
|
Simon Marchi
|
c2e0e465f9 |
Fix type of values representing optimized out static members
As reported here: https://sourceware.org/ml/gdb/2018-02/msg00019.html the type of values representing static members that are optimized out is wrong. It currently assigns the type of the containing class rather than the type of the field. This patch fixes that. I found a place in m-static.exp already dealing with optimized out static members, so I just added some gdb_test there. gdb/ChangeLog: * value.c (value_static_field): Assign field type instead of containing type when returning an optimized out value. gdb/testsuite/ChangeLog: * gdb.cp/m-static.exp: Check type of optimized out static member. |
|
|
Simon Marchi
|
ba18742c3a |
C++ify xmethod_worker, get rid of VEC(xmethod_worker_ptr)
The initial goal of this patch was to remove the usage of VEC(xmethod_worker_ptr) and corresponding cleanups. I ended up having to C++ify the xmethod_worker code, to be able to have xmethod_workers free their data in destructors, and therefore be able to use vectors of xmethod_worker unique_ptr. The operations in extension_language_ops that act on one instance of xmethod_worker (get result type, get args type, invoke) are transformed to methods of xmethod_worker. xmethod_worker becomes an abstract base class with virtual pure methods which python_xmethod_worker implements. The only xmethod-related operation left in extension_language_ops is get_matching_xmethod_workers, which returns a list of xmethod_workers. The changes are relatively straightforward, but here are some notes on things that may raise eyebrows: - I was not really comfortable with the value_of_xmethod function. At first it looks like a simple getter, so I considered making it a method of xmethod_worker. But actually it creates a value and transfers the ownership of the xmethod_worker to it. It would be a bit weird and error-prone if calling a method on an object silently removed the ownership of the object from the caller. To reflect the behavior more accurately, I renamed it to value_from_xmethod and made it accept an rvalue-reference (so the caller knows it gives away the ownership). I noticed the backlink from xmethod_worker to its owning value was not used, so I removed it. - Some code, like get_matching_xmethod_workers, made each callee fill a new vector, which was then merged in the result vector. I think it's safe if we always pass the same vector around, and each implementation just appends to it. - The clone operation does not seem particularly useful, it is removed in the following patch. gdb/ChangeLog: * extension-priv.h (enum ext_lang_rc): Remove, move to extension.h. (struct extension_language_ops) <clone_xmethod_worker_data>: Remove. <free_xmethod_worker_data>: Remove. <get_matching_xmethod_workers>: Chance VEC to std::vector. <get_xmethod_arg_types>: Remove. <get_xmethod_result_type>: Remove. <invoke_xmethod>: Remove. * extension.c (new_xmethod_worker): Remove. (clone_xmethod_worker): Remove. (get_matching_xmethod_workers): Return void, pass std::vector by pointer. (get_xmethod_arg_types): Rename to... (xmethod_worker::get_arg_types): ... this, and adjust. (get_xmethod_result_type): Rename to... (xmethod_worker::get_result_type): ... this, and adjust. (invoke_xmethod): Remove. (free_xmethod_worker): Remove. (free_xmethod_worker_vec): Remove. * extension.h (enum ext_lang_rc): Move here from extension-priv.h. (struct xmethod_worker): Add constructor and destructor. <data>: Remove. <value>: Remove. <invoke, clone, do_get_result_type, do_get_arg_types>: New virtual pure methods. <get_arg_types, get_result_type>: New methods. (xmethod_worker_ptr): Remove typedef. (DEF_VEC_P (xmethod_worker_ptr)): Remove. (xmethod_worker_vec): Remove typedef. (xmethod_worker_up): New typedef. (invoke_xmethod): Remove. (clone_xmethod_worker): Remove. (free_xmethod_worker): Remove. (free_xmethod_worker_vec): Remove. (get_xmethod_arg_types): Remove. (get_xmethod_result_type): Remove. * valops.c (find_method_list): Use std::vector, don't use intermediate vector. (value_find_oload_method_list): Use std::vector. (find_overload_match): Use std::vector. (find_oload_champ): Use std::vector. * value.c (value_free): Use operator delete. (value_of_xmethod): Rename to... (value_from_xmethod): ... this. Don't assign xmethod_worker::value, take rvalue-reference. (result_type_of_xmethod): Adjust. (call_xmethod): Adjust. * value.h: Include extension.h. (struct xmethod_worker): Don't forward-declare. (value_of_xmethod): Rename to... (value_from_xmethod): ... this, take rvalue-reference. * python/py-xmethods.c (struct gdbpy_worker_data): Rename to... (struct python_xmethod_worker): ... this, add constructor and destructor. <invoke, clone, do_get_arg_types, do_get_result_type>: Implement. (gdbpy_free_xmethod_worker_data): Rename to... (python_xmethod_worker::~python_xmethod_worker): ... this and adjust. (gdbpy_clone_xmethod_worker_data): Rename to... (python_xmethod_worker::clone): ... this and adjust. (gdbpy_get_matching_xmethod_workers): Use std::vector, don't use temporary vector. (gdbpy_get_xmethod_arg_types): Rename to... (python_xmethod_worker::do_get_arg_types): ... this and adjust. (gdbpy_get_xmethod_result_type): Rename to... (python_xmethod_worker::do_get_result_type): ... this and adjust. (gdbpy_invoke_xmethod): Rename to... (python_xmethod_worker::invoke): ... this and adjust. (new_python_xmethod_worker): Rename to... (python_xmethod_worker::python_xmethod_worker): ... this and adjust. * python/python-internal.h (gdbpy_clone_xmethod_worker_data): Remove. (gdbpy_free_xmethod_worker_data): Remove. (gdbpy_get_matching_xmethod_workers): Use std::vector. (gdbpy_get_xmethod_arg_types): Remove. (gdbpy_get_xmethod_result_type): Remove. (gdbpy_invoke_xmethod): Remove. * python/python.c (python_extension_ops): Remove obsolete callbacks. |
|
Joel Brobecker
|
e2882c8578 |
Update copyright year range in all GDB files
gdb/ChangeLog:
Update copyright year range in all GDB files
|
|
Yao Qi
|
98ead37e97 |
Change value_contents_eq return bool
This patch changes value_contents_eq return type from int to bool. gdb: 2017-11-24 Yao Qi <yao.qi@linaro.org> * mi/mi-main.c (register_changed_p): Update. * value.c (value_contents_bits_eq): Change return type. (value_contents_eq): Likewise. * value.h: Update comments. |
|
|
Tom Tromey
|
eb4c3f4aaa |
Constify add_setshow_*
This constifies the add_setshow_* family of functions, and then fixes up the fallout. The bulk of this patch was written by script. gdb/ChangeLog 2017-11-07 Tom Tromey <tom@tromey.com> * ada-lang.c (catch_ada_exception_command): Constify. (catch_assert_command): Constify. * break-catch-throw.c (catch_catch_command, catch_throw_command) (catch_rethrow_command): Constify. (catch_exception_command_1): Constify. * breakpoint.h (add_catch_command): Constify. * break-catch-syscall.c (catch_syscall_command_1): Constify. (catch_syscall_split_args): Constify. * break-catch-sig.c (catch_signal_command): Constify. (catch_signal_split_args): Constify. * cli/cli-decode.h (struct cmd_list_element) <function>: Use cmd_const_sfunc_ftype. * cli/cli-decode.c (add_setshow_cmd_full): Constify. (add_setshow_enum_cmd, add_setshow_auto_boolean_cmd) (add_setshow_boolean_cmd, add_setshow_filename_cmd) (add_setshow_string_cmd, struct cmd_list_element) (add_setshow_optional_filename_cmd, add_setshow_integer_cmd) (add_setshow_uinteger_cmd, add_setshow_zinteger_cmd) (add_setshow_zuinteger_unlimited_cmd, add_setshow_zuinteger_cmd): Constify. (set_cmd_sfunc): Constify. (empty_sfunc): Constify. * command.h (add_setshow_enum_cmd, add_setshow_auto_boolean_cmd) (add_setshow_boolean_cmd, add_setshow_filename_cmd) (add_setshow_string_cmd, add_setshow_string_noescape_cmd) (add_setshow_optional_filename_cmd, add_setshow_integer_cmd) (add_setshow_uinteger_cmd, add_setshow_zinteger_cmd) (add_setshow_zuinteger_cmd, add_setshow_zuinteger_unlimited_cmd): Constify. (set_cmd_sfunc): Constify. (cmd_sfunc_ftype): Remove. * compile/compile.c (set_compile_args): Constify. * infrun.c (set_disable_randomization): Constify. * infcmd.c (set_args_command, set_cwd_command): Constify. * breakpoint.c (set_condition_evaluation_mode): Constify. (add_catch_command): Constify. (catch_fork_command_1, catch_exec_command_1) (catch_load_command_1, catch_unload_command_1): Constify. (catch_load_or_unload): Constify. * guile/scm-param.c (pascm_set_func): Constify. (add_setshow_generic): Constify. * python/py-param.c (get_set_value): Constify. * top.h (set_verbose): Constify. * tui/tui-win.c (tui_set_var_cmd): Constify. * mi/mi-main.c (set_mi_async_command): Constify. * cli/cli-logging.c (set_logging_overwrite) (set_logging_redirect): Constify. * value.c (set_max_value_size): Constify. * valprint.c (set_input_radix, set_output_radix): Constify. * utils.c (set_width_command, set_height_command): Constify. * typeprint.c (set_print_type_methods, set_print_type_typedefs): Constify. * tracepoint.c (set_disconnected_tracing) (set_circular_trace_buffer, set_trace_buffer_size) (set_trace_user, set_trace_notes, set_trace_stop_notes): Constify. * top.c (set_history_size_command, set_verbose, set_editing) (set_gdb_datadir, set_history_filename): Constify. * target.c (set_targetdebug, maint_set_target_async_command) (maint_set_target_non_stop_command, set_target_permissions) (set_write_memory_permission): Constify. (open_target): Constify. * target-descriptions.c (set_tdesc_filename_cmd): Constify. * target-dcache.c (set_stack_cache, set_code_cache): Constify. * symtab.c (set_symbol_cache_size_handler): Constify. * symfile.c (set_ext_lang_command): Constify. * symfile-debug.c (set_debug_symfile): Constify. * source.c (set_directories_command): Constify. * solib.c (reload_shared_libraries, gdb_sysroot_changed): Constify. * serial.c (set_parity): Constify. * rs6000-tdep.c (powerpc_set_soft_float, powerpc_set_vector_abi): Constify. * remote.c (set_remote_exec_file, set_remotebreak) (set_remote_protocol_Z_packet_cmd, set_range_stepping): Constify. * record.c (set_record_insn_history_size) (set_record_call_history_size): Constify. * record-full.c (set_record_full_insn_max_num): Constify. * proc-api.c (set_procfs_trace_cmd, set_procfs_file_cmd): Constify. * osabi.c (set_osabi): Constify. * mips-tdep.c (set_mips64_transfers_32bit_regs) (reinit_frame_cache_sfunc, mips_abi_update): Constify. * maint.c (maintenance_set_profile_cmd): Constify. * linux-thread-db.c (set_libthread_db_search_path): Constify. * language.c (set_language_command, set_range_command) (set_case_command): Constify. * infrun.c (set_non_stop, set_observer_mode) (set_stop_on_solib_events, set_schedlock_func) (set_exec_direction_func): Constify. * infcmd.c (set_inferior_tty_command): Constify. * disasm.c (set_disassembler_options_sfunc): Constify. * demangle.c (set_demangling_command): Constify. * dcache.c (set_dcache_size, set_dcache_line_size): Constify. * cris-tdep.c (set_cris_version, set_cris_mode) (set_cris_dwarf2_cfi): Constify. * corefile.c (set_gnutarget_command): Constify. * charset.c (set_host_charset_sfunc, set_target_charset_sfunc) (set_target_wide_charset_sfunc): Constify. * breakpoint.c (update_dprintf_commands): Constify. * auto-load.c (set_auto_load_dir, set_auto_load_safe_path): Constify. * arm-tdep.c (set_fp_model_sfunc, arm_set_abi) (set_disassembly_style_sfunc): Constify. * arch-utils.c (set_endian, set_architecture): Constify. * alpha-tdep.c (reinit_frame_cache_sfunc): Constify. * agent.c (set_can_use_agent): Constify. |
|
|
Tom Tromey
|
5fed81ff35 |
Remove cmd_cfunc_ftype
This removes cmd_cfunc_ftype and the non-const overload of add_cmd; then fixes up the fallout. For the most part this patch is straightforward. There are a few files (go32-nat.c, windows-nat.c, and gnu-nat.c) that I could not compile; so I made a best effort there. gdb/ChangeLog 2017-11-07 Tom Tromey <tom@tromey.com> * go32-nat.c (go32_sysinfo, go32_sldt, go32_sgdt, go32_sidt) (go32_pde, go32_pte, go32_pte_for_address): Constify. * gnu-nat.c (_parse_bool_arg, show_thread_default_pause_cmd) (set_thread_default_pause_cmd, set_thread_default_run_cmd) (show_thread_default_run_cmd, set_thread_default_detach_sc_cmd) (parse_int_arg, show_thread_default_detach_sc_cmd) (set_signals_cmd, show_signals_cmd, set_sig_thread_cmd) (show_sig_thread_cmd, set_stopped_cmd, show_stopped_cmd) (set_exceptions_cmd, show_exceptions_cmd, set_task_pause_cmd) (show_task_pause_cmd, set_task_detach_sc_cmd) (show_task_detach_sc_cmd, set_task_exc_port_cmd) (set_noninvasive_cmd, set_thread_pause_cmd) (show_thread_pause_cmd, set_thread_run_cmd, show_thread_run_cmd) (set_thread_detach_sc_cmd, show_thread_detach_sc_cmd) (set_thread_exc_port_cmd, thread_takeover_sc_cmd): Constify. * windows-nat.c (display_selectors): Constify. * cli/cli-decode.h (struct cmd_list_element) <function>: Remove non-const "cfunc". * cli/cli-decode.c (set_cmd_cfunc): Remove non-const overload. (cmd_cfunc_eq): Likewise. (struct cmd_list_element): Likewise. (do_cfunc): Remove. (cli_user_command_p): Update. * command.h (add_cmd): Remove non-const overload. (cmd_cfunc_ftype): Remove typedef. (cmd_cfunc_eq): Remove non-const overload. * value.c (show_values): Constify. * thread.c (thread_apply_all_command): Constify. * symfile.c (load_command): Constify. * source.c (directory_command): Constify. * maint.c (maintenance_internal_error) (maintenance_demangler_warning, maintenance_space_display) (maintenance_print_architecture, maintenance_translate_address) (maintenance_info_selftests, maintenance_internal_warning): Constify. * breakpoint.c (disable_trace_command, enable_trace_command): Constify. * auto-load.c (info_auto_load_local_gdbinit, add_auto_load_dir): Constify. (add_auto_load_safe_path): Constify. * guile/scm-auto-load.c (info_auto_load_guile_scripts): Constify. * top.h (show_commands): Constify. * linux-thread-db.c (info_auto_load_libthread_db): Constify. * sparc64-tdep.c (adi_examine_command): Constify. (adi_assign_command): Constify. |
|
|
Tom Tromey
|
0b39b52e6e |
Constify add_com
This changes add_com to take a cmd_const_cfunc_ftype, and then fixes up all the command implementations. In most cases this is trivial. In a couple of places I had to again introduce a temporary non-const overload. These overloads will be removed when add_info is constified. gdb/ChangeLog 2017-11-07 Tom Tromey <tom@tromey.com> * solib.h (no_shared_libraries): Constify. * frame.h (return_command): Constify. * cli/cli-cmds.h (quit_command): Constify. * top.h (quit_command, execute_command): Constify. * target.h (flash_erase_command): Constify. * inferior.h (set_inferior_args, attach_command): Constify. * tracepoint.h (start_tracing, stop_tracing): Constify. * breakpoint.h (break_command, tbreak_command) (hbreak_command_wrapper, thbreak_command_wrapper) (rbreak_command_wrapper, watch_command_wrapper) (awatch_command_wrapper, rwatch_command_wrapper) (get_tracepoint_by_number): Constify. * symtab.c (info_variables_command, rbreak_command) (symtab_symbol_info): Constify. (info_variables_command): Add non-const overload. * top.c (dont_repeat_command): Constify. * breakpoint.c (ignore_command, commands_command) (condition_command, tbreak_command, hbreak_command) (thbreak_command, clear_command, break_command) (info_breakpoints_command, watch_command, rwatch_command) (awatch_command, trace_command, ftrace_command, strace_command) (trace_pass_command, break_range_command, dprintf_command) (agent_printf_command, get_tracepoint_by_number) (watch_maybe_just_location, trace_pass_command): Constify. (info_breakpoints_command): Add non-const overload. * tracefile.c (tsave_command): Constify. * infcmd.c (attach_command, disconnect_command, signal_command) (queue_signal_command, stepi_command, nexti_command) (finish_command, next_command, step_command, until_command) (advance_command, jump_command, continue_command, run_command) (start_command, starti_command, interrupt_command) (run_command_1, set_inferior_args, step_1): Constify. * inferior.c (add_inferior_command, remove_inferior_command) (clone_inferior_command): Constify. * linux-fork.c (checkpoint_command, restart_command): Constify. * windows-nat.c (signal_event_command): Constify. * guile/guile.c (guile_repl_command, guile_command): Constify. * printcmd.c (x_command, display_command, printf_command) (output_command, set_command, call_command, print_command) (eval_command): Constify. (non_const_set_command): Remove. (_initialize_printcmd): Update. * source.c (forward_search_command, reverse_search_command): Constify. * jit.c (jit_reader_load_command, jit_reader_unload_command): Constify. * infrun.c (handle_command): Constify. * memattr.c (mem_command): Constify. * stack.c (return_command, up_command, up_silently_command) (down_command, down_silently_command, frame_command) (backtrace_command, func_command, backtrace_command_1): Constify. (backtrace_command): Add non-const overload. * remote-sim.c (simulator_command): Constify. * exec.c (set_section_command): Constify. * tracepoint.c (tdump_command, trace_variable_command) (tstatus_command, tstop_command, tstart_command) (end_actions_pseudocommand, while_stepping_pseudocommand) (collect_pseudocommand, teval_pseudocommand, actions_command) (start_tracing, stop_tracing): Constify. * value.c (init_if_undefined_command): Constify. * tui/tui-stack.c (tui_update_command): Constify. * tui/tui-win.c (tui_refresh_all_command) (tui_set_tab_width_command, tui_set_win_height_command) (tui_set_focus_command, tui_scroll_forward_command) (tui_scroll_backward_command, tui_scroll_left_command) (tui_scroll_right_command, parse_scrolling_args, tui_set_focus) (tui_set_win_height): Constify. * tui/tui-layout.c (tui_layout_command): Constify. * procfs.c (proc_trace_syscalls, proc_trace_sysentry_cmd) (proc_trace_sysexit_cmd, proc_untrace_sysentry_cmd) (proc_untrace_sysexit_cmd): Constify. * remote.c (threadlist_test_cmd, threadinfo_test_cmd) (threadset_test_cmd, threadlist_update_test_cmd) (threadalive_test): Constify. * objc-lang.c (print_object_command): Constify. * command.h (add_com): Constify. * cli/cli-dump.c (restore_command): Constify. * cli/cli-cmds.c (pwd_command, echo_command, quit_command) (help_command, complete_command, shell_command, edit_command) (list_command, disassemble_command, make_command) (apropos_command, alias_command): Constify. * cli/cli-script.c (document_command, define_command) (while_command, if_command, validate_comname): Constify. * cli/cli-decode.c (struct cmd_list_element): Change type of "fun". * target.c (do_monitor_command, flash_erase_command): Constify. * regcache.c (reg_flush_command): Constify. * reverse.c (reverse_step, reverse_next, reverse_stepi) (reverse_nexti, reverse_continue, reverse_finish) (save_bookmark_command, goto_bookmark_command) (exec_reverse_once): Constify. * python/python.c (python_interactive_command, python_command): Constify. * typeprint.c (ptype_command, whatis_command, whatis_exp): Constify. * solib.c (sharedlibrary_command, no_shared_libraries): Constify. * gcore.c (gcore_command): Constify. |
|
|
Tom Tromey
|
85c4be7c83 |
Add set_repeat_arguments function
The "x", "list", and "show commands" commands have special repetition behavior: repeating the command doesn't re-run it with the same arguments This is currently implemented by modifying the passed-in argument; but that won't work properly with const arguments (and seems pretty obscure besides). This patch adds a new "set_repeat_arguments" function and changes the relevant places to call it. gdb/ChangeLog 2017-11-07 Tom Tromey <tom@tromey.com> * printcmd.c (x_command): Call set_repeat_arguments. * cli/cli-cmds.c (list_command): Call set_repeat_arguments. * top.c (repeat_arguments): New global. (set_repeat_arguments): New function. (execute_command): Handle repeat_arguments. (show_commands): Calls set_repeat_arguments. * command.h (set_repeat_arguments): Declare. |
|
Ulrich Weigand
|
b07e9c466e |
Target FP: Remove unused floating-point routines
This patch removes the following routines, which now have no remaining
users in GDB:
- extract_typed_floating
- store_typed_floating
- convert_typed_floating
- decimal_from_doublest
- decimal_to_doublest
- value_as_double
- unpack_double
- value_from_double
- value_from_decfloat
This completes removal of DOUBLEST from all files except doublest.{c,h}
and target-float.c.
gdb/ChangeLog:
2017-11-06 Ulrich Weigand <uweigand@de.ibm.com>
* doublest.c: Do not include "gdbtypes.h".
(extract_typed_floating): Remove.
(store_typed_floating): Remove.
(convert_typed_floating): Remove.
* doublest.h (struct type): Remove.
(DOUBLEST_PRINT_FORMAT): Remove.
(DOUBLEST_SCAN_FORMAT): Remove.
(extract_typed_floating): Remove.
(store_typed_floating): Remove.
(convert_typed_floating): Remove.
* dfp.c (decimal_from_doublest): Remove.
(decimal_to_doublest): Remove.
* dfp.h: Do not include "doublest.h".
(decimal_from_doublest): Remove.
(decimal_to_doublest): Remove.
* value.c: Do not include "doublest.h" and "dfp.h".
(value_as_double): Remove.
(unpack_double): Remove.
(value_from_double): Remove.
(value_from_decfloat): Remove.
* value.h: Do not include "doublest.h".
(value_as_double): Remove.
(unpack_double): Remove.
(value_from_double): Remove.
(value_from_decfloat): Remove.
|
|
|
Ulrich Weigand
|
50637b26f8 |
Target FP: Add conversion routines to target-float.{c,h}
This patch adds the following conversion routines: - target_float_to_longest - target_float_from_longest - target_float_from_ulongest - target_float_convert which call the equivalent decimal_ routines to handle decimal FP, and call helper routines that currently still go via DOUBLEST to handle binary FP. The target_float_convert routine not only handles BFP<->BFP and DFP<->DFP conversions, but also BFP<->DFP, which are implemented by converting to a string and back. These helpers are used in particular to implement conversion from and to FP in value_cast, without going through DOUBLEST there. In order to implement this for the FP<-integer case, the pack_long / pack_unsigned_long routines are extended to support floating-point values as output (thereby allowing use of value_from_[u]longest with a floating-point target type). This latter change also allows simplification of value_one. gdb/ChangeLog: 2017-11-06 Ulrich Weigand <uweigand@de.ibm.com> * target-float.c (floatformat_to_longest): New function. (floatformat_from_longest, floatformat_from_ulongest): Likewise. (floatformat_convert): Likewise. (target_float_to_longest): Likewise. (target_float_from_longest, target_float_from_ulongest): Likewise. (target_float_convert): Likewise. * target-float.h (target_float_to_longest): Add prototype. (target_float_from_longest, target_float_from_ulongest): Likewise. (target_float_convert): Likewise. * value.c (unpack_long): Use target_float_to_longest. (pack_long): Allow FP types. Use target_float_from_longest. (pack_unsigned_long): Likewise using target_float_from_ulongest. * valops.c: Include "target-float.h". Do not include "dfp.h". (value_cast): Handle conversions to FP using target_float_convert, value_from_ulongest, and value_from_longest. (value_one): Use value_from_longest for FP types as well. |
|
|
Ulrich Weigand
|
701000146a |
Target FP: Introduce target-float.{c,h}
This patch introduces the new set of target floating-point handling routines
in target-float.{c,h}. In the end, the intention is that this file will
contain support for all operations in target FP format, fully replacing
both the current doublest.{c,h} and dfp.{c,h}.
To begin with, this patch only adds a target_float_is_zero routine,
which handles the equivalent of decimal_is_zero for both binary and
decimal FP. For the binary case, to avoid conversion to DOUBLEST,
this is implemented using the floatformat_classify routine.
However, it turns out that floatformat_classify actually has a bug
(it was not used to check for zero before), so this is fixed as well.
The new routine is used in both value_logical_not and valpy_nonzero.
There is one extra twist: the code previously used value_as_double
to convert to DOUBLEST and then compare against zero. That routine
performs an extra task: it detects invalid floating-point values
and raises an error. In any place where value_as_double is removed
in favor of some target-float.c routine, we need to replace that check.
To keep this check centralized in one place, I've added a new routine
is_floating_value, which returns a boolean determining whether a
value's type is floating point (binary or decimal), and if so, also
performs the validity check. Since we need to check whether a value
is FP before calling any of the target-float routines anyway, this
seems a good place to add the check without much code size overhead.
In some places where we only want to check for floating-point types
and not perform a validity check (e.g. for the *output* of an operation),
we can use the new is_floating_type routine (in gdbarch) instead.
The validity check itself is done by a new target_float_is_valid
routine in target-float, encapsulating floatformat_is_valid.
ChangeLog:
2017-11-06 Ulrich Weigand <uweigand@de.ibm.com>
* Makefile.c (SFILES): Add target-float.c.
(HFILES_NO_SRCDIR): Add target-float.h.
(COMMON_OBS): Add target-float.o.
* target-float.h: New file.
* target-float.c: New file.
* doublest.c (floatformat_classify): Fix detection of float_zero.
* gdbtypes.c (is_floating_type): New function.
* gdbtypes.h (is_floating_type): Add prototype.
* value.c: Do not include "floatformat.h".
(unpack_double): Use target_float_is_valid.
(is_floating_value): New function.
* value.h (is_floating_value): Add prototype-
* valarith.c: Include "target-float.h".
(value_logical_not): Use target_float_is_zero.
* python/py-value.c: Include "target-float.h".
(valpy_nonzero): Use target_float_is_zero.
|
|
|
Tom Tromey
|
981a3fb359 |
Constify add_prefix_cmd
This changes add_prefix_cmd to accept a const-taking function as an argument; then fixes up all the callers. In a couple of spots I had to add a non-const overload of a function, because the function is passed to two different command-adding "constructors". These overloads are temporary; once constification is complete they can be removed. This patch also fixes a typo I happened to notice while constifying. Note that this touches a couple of files (gnu-nat.c and go32-nat.c) that I can't build. So, while I made a best-effort there, I am not certain they will still compile. Tested by rebuilding. gdb/ChangeLog 2017-10-11 Tom Tromey <tom@tromey.com> * gdbthread.h (thread_command): Constify. * inferior.h (detach_command): Constify. * top.h (set_history, show_history): Constify. * arm-tdep.c (set_arm_command, show_arm_command): Constify. * serial.c (serial_set_cmd, serial_show_cmd): Constify. * bsd-kvm.c (bsd_kvm_cmd): Constify. * printcmd.c (set_command): Constify. (non_const_set_command): New function. * dcache.c (set_dcache_command, show_dcache_command): Constify. * breakpoint.c (enable_command, disable_command, delete_command) (catch_command, tcatch_command, set_breakpoint_cmd) (show_breakpoint_cmd): Constify. * macrocmd.c (macro_command): Constify. * infcmd.c (unset_command, kill_command, detach_command) (info_proc_cmd): Constify. * i386-tdep.c (set_mpx_cmd, show_mpx_cmd): Constify. * auto-load.c (show_auto_load_cmd, set_auto_load_cmd) (info_auto_load_cmd): Constify. * target-descriptions.c (set_tdesc_cmd, show_tdesc_cmd) (unset_tdesc_cmd): Constify. * ada-lang.c (set_ada_command, show_ada_command) (maint_set_ada_cmd, maint_show_ada_cmd): Constify. * guile/guile.c (set_guile_command, show_guile_command) (info_guile_command): Constify. * tui/tui-win.c (tui_command, set_tui_cmd, show_tui_cmd): Constify. * skip.c (skip_command): Constify. * compile/compile.c (_initialize_compile): Constify. * dwarf2read.c (set_dwarf_cmd, show_dwarf_cmd): Constify. * btrace.c (maint_btrace_cmd, maint_btrace_set_cmd) (maint_btrace_show_cmd, maint_btrace_pt_set_cmd) (maint_btrace_pt_show_cmd): Constify. * remote.c (set_remote_cmd, show_remote_cmd, remote_command): Constify. * python/python.c (user_show_python, user_set_python): Constify. * mips-tdep.c (set_mips_command, show_mips_command) (set_mipsfpu_command): Constify. * record-btrace.c (cmd_record_btrace_start) (cmd_set_record_btrace, cmd_show_record_btrace) (cmd_set_record_btrace_bts, cmd_show_record_btrace_bts) (cmd_set_record_btrace_pt, cmd_show_record_btrace_pt): Constify. * rs6000-tdep.c (set_powerpc_command, show_powerpc_command): Constify. * symfile.c (overlay_command): Constify. * spu-tdep.c (set_spu_command, show_spu_command): Constify. * cli/cli-logging.c (set_logging_command, show_logging_command): Constify. * cli/cli-dump.c (dump_command, append_command) (srec_dump_command, ihex_dump_command, verilog_dump_command) (tekhex_dump_command, binary_dump_command) (binary_append_command): Constify. * cli/cli-decode.c (struct cmd_list_element): Change type of "fun". * cli/cli-cmds.c (info_command, show_command, set_debug) (show_debug): Constify. (show_command): Add non-const overload. * top.c (set_history, show_history): Constify. * sh-tdep.c (set_sh_command, show_sh_command): Constify. * command.h (add_prefix_cmd): Accept a cmd_const_cfunc_ftype. * target.c (target_command): Constify. * sparc64-tdep.c (info_adi_command): Constify. * record-full.c (cmd_record_full_start): Constify. (set_record_full_command): Constify. Fix typo. (show_record_full_command): Constify. * thread.c (thread_command, thread_apply_command): Constify. * memattr.c (dummy_cmd): Constify. * value.c (function_command): Constify. * frame.c (set_backtrace_cmd, show_backtrace_cmd): Constify. * probe.c (info_probes_command): Constify. * ser-tcp.c (set_tcp_cmd, show_tcp_cmd): Constify. * gnu-nat.c (set_task_cmd, show_task_cmd, set_thread_cmd) (show_thread_cmd, set_thread_default_cmd) (show_thread_default_cmd): Constify. (check_empty): Constify. * tracepoint.c (tfind_command): Constify. * cp-support.c (maint_cplus_command): Constify. * windows-tdep.c (info_w32_command): Constify. * record.c (cmd_record_start, set_record_command) (show_record_command, info_record_command, cmd_record_goto): Constify. * ravenscar-thread.c (set_ravenscar_command) (show_ravenscar_command): Constify. * utils.c (set_internal_problem_cmd, show_internal_problem_cmd): Constify. (add_internal_problem_command): Remove casts. * arc-tdep.c (maintenance_print_arc_command): Constify. * valprint.c (set_print, show_print, set_print_raw) (show_print_raw): Constify. * maint.c (maintenance_command, maintenance_info_command) (maintenance_print_command, maintenance_set_cmd) (maintenance_show_cmd, set_per_command_cmd) (show_per_command_cmd, maintenance_check_command): Constify. * language.c (set_check, show_check): Constify. * typeprint.c (show_print_type, set_print_type): Constify. * go32-nat.c (go32_info_dos_command): Constify. |
|
|
Ulrich Weigand
|
3b4b2f160d |
Clean up some DFP interfaces
This cleans up a number of interfaces in dfp.c / dfp.h. Specifically: - The decimal_from_string / decimal_to_string routines are C++-ified to operate on std::string instead of character buffers. In the decimal_from_string, the boolean return value now actually is bool instead of an int. - The decimal_from_integral and decimal_from_doublest routines take an struct value as input. This is not really appropriate at the low level the DFP routines sit, so this replaced them with new routines decimal_from_longest / decimal_from_ulongest / decimal_from_doublest that operate on contents instead. - To mirror the decimal_from_[u]longest, a new decimal_to_longest routine is added as well, which can be used in unpack_long to avoid an unnecessary conversion via DOUBLEST. Note that the decimal_from_longest / decimal_from_ulongest routines are actually more powerful than decimal_from_integral: the old routine would only accept integer *types* of at most four bytes size, while the new routines accept all integer *values* that fit in an [u]int32_t, no matter which type they came from. The DFP tests are updated to allow for this larger range of integers that can be converted. gdb/ChangeLog: 2017-10-05 Ulrich Weigand <uweigand@de.ibm.com> * dfp.h (MAX_DECIMAL_STRING): Move to dfp.c. (decimal_to_string): Return std::string object. (decimal_from_string): Accept std::string object. Return bool. (decimal_from_integral, decimal_from_doublest): Remove. (decimal_from_longest): Add prototype. (decimal_from_ulongest): Likewise. (decimal_to_longest): Likewise. (decimal_from_doublest): Likewise. * dfp.c: Do not include "gdbtypes.h" or "value.h". (MAX_DECIMAL_STRING): Move here. (decimal_to_string): Return std::string object. (decimal_from_string): Accept std::string object. Return bool. (decimal_from_integral): Remove, replace by ... (decimal_from_longest, decimal_from_ulongest): ... these new functions. (decimal_to_longest): New function. (decimal_from_floating): Remove, replace by ... (decimal_from_doublest): ... this new function. (decimal_to_doublest): Update to new decimal_to_string interface. * value.c (unpack_long): Use decimal_to_longest. * valops.c (value_cast): Use decimal_from_doublest instead of decimal_from_floating. Use decimal_from_[u]longest isntead of decimal_from_integral. * valarith.c (value_args_as_decimal): Likewise. * valprint.c (print_decimal_floating): Update to new decimal_to_string interface. * printcmd.c (printf_decfloat): Likewise. * c-exp.y (parse_number): Update to new decimal_from_string interface. gdb/testsuite/ChangeLog: 2017-10-05 Ulrich Weigand <uweigand@de.ibm.com> * gdb.base/dfp-exprs.exp: Update tests to larger range of supported integer-to-dfp conversion. * gdb.base/dfp-test.exp: Likewise. |
|
|
Ulrich Weigand
|
1841ee5d03 |
Clean up includes of doublest.h and floatformat.h
As a first small step to getting rid of doublest.h, this patch removes the include of "floatformat.h" in "doublest.h". This is actually not needed for the file itself. A few source files now need to include "floatformat.h" directly, since they got it indirectly via "doublest.h" and still need it. In reviewing which files need it, I found a number of files that include "floatformat.h" directly without actually needing it at all. Similarly, a number of files include "doublest.h" without needing it. I've also removed those unnecessary include statements. gdb/ChangeLog: 2017-10-05 Ulrich Weigand <uweigand@de.ibm.com> * doublest.h: Do not include "floatformat.h". Remove stale comments. * gdbtypes.c: Include "floatformat.h". * value.c: Likewise. * m68k-tdep.c: Likewise. * findvar.c: Do not include "floatformat.h". * amd64-darwin-tdep.c: Likewise. * arm-linux-tdep.c: Likewise. * i386-darwin-tdep.c: Likewise. * i387-tdep.c: Likewise. * m68k-linux-tdep.c: Likewise. * mep-tdep.c: Likewise. * mips-tdep.c: Likewise. * nios2-tdep.c: Likewise. * s390-linux-tdep.c: Likewise. * sparc-obsd-tdep.c: Likewise. * sparc-tdep.c: Likewise. * sparc64-tdep.c: Likewise. * spu-tdep.c: Likewise. * tic6x-tdep.c: Likewise. * tilegx-tdep.c: Likewise. * vax-tdep.c: Likewise. * xstormy16-tdep.c: Likewise. * xtensa-tdep.c: Likewise. * top.c: Do not include "doublest.h". * aarch64-tdep.c: Likewise. * alpha-tdep.c: Likewise. * arm-linux-tdep.c: Likewise. * m68k-linux-tdep.c: Likewise. * tilegx-tdep.c: Likewise. * xstormy16-tdep.c: Likewise. |
|
|
Tom Tromey
|
ad25e4234a |
Constify show_convenience
gdb/ChangeLog 2017-09-27 Tom Tromey <tom@tromey.com> * value.c (show_convenience): Constify. |
|
John Baldwin
|
481695ed5f |
Remove unnecessary function prototypes.
These prototypes were required when compiling GDB as C but are not required for C++. gdb/ChangeLog: * aarch64-linux-nat.c: Remove _initialize_aarch64_linux_nat prototype. * aarch64-linux-tdep.c: Remove _initialize_aarch64_linux_tdep prototype. * aarch64-newlib-tdep.c: Remove _initialize_aarch64_newlib_tdep prototype. * aarch64-tdep.c: Remove _initialize_aarch64_tdep prototype. * ada-exp.y: Remove _initialize_ada_exp prototype. * ada-lang.c: Remove _initialize_ada_language prototype. * ada-tasks.c: Remove _initialize_tasks prototype. * addrmap.c: Remove _initialize_addrmap prototype. * agent.c: Remove _initialize_agent prototype. * aix-thread.c: Remove _initialize_aix_thread prototype. * alpha-bsd-nat.c: Remove _initialize_alphabsd_nat prototype. * alpha-linux-nat.c: Remove _initialize_alpha_linux_nat prototype. * alpha-linux-tdep.c: Remove _initialize_alpha_linux_tdep prototype. * alpha-nbsd-tdep.c: Remove _initialize_alphanbsd_tdep prototype. * alpha-obsd-tdep.c: Remove _initialize_alphaobsd_tdep prototype. * alpha-tdep.c: Remove _initialize_alpha_tdep prototype. * amd64-darwin-tdep.c: Remove _initialize_amd64_darwin_tdep prototype. * amd64-dicos-tdep.c: Remove _initialize_amd64_dicos_tdep prototype. * amd64-fbsd-nat.c: Remove _initialize_amd64fbsd_nat prototype. * amd64-fbsd-tdep.c: Remove _initialize_amd64fbsd_tdep prototype. * amd64-linux-nat.c: Remove _initialize_amd64_linux_nat prototype. * amd64-linux-tdep.c: Remove _initialize_amd64_linux_tdep prototype. * amd64-nbsd-nat.c: Remove _initialize_amd64nbsd_nat prototype. * amd64-nbsd-tdep.c: Remove _initialize_amd64nbsd_tdep prototype. * amd64-obsd-nat.c: Remove _initialize_amd64obsd_nat prototype. * amd64-obsd-tdep.c: Remove _initialize_amd64obsd_tdep prototype. * amd64-sol2-tdep.c: Remove _initialize_amd64_sol2_tdep prototype. * amd64-tdep.c: Remove _initialize_amd64_tdep prototype. * amd64-windows-nat.c: Remove _initialize_amd64_windows_nat prototype. * amd64-windows-tdep.c: Remove _initialize_amd64_windows_tdep prototype. * annotate.c: Remove _initialize_annotate prototype. * arc-newlib-tdep.c: Remove _initialize_arc_newlib_tdep prototype. * arc-tdep.c: Remove _initialize_arc_tdep prototype. * arch-utils.c: Remove _initialize_gdbarch_utils prototype. * arm-linux-nat.c: Remove _initialize_arm_linux_nat prototype. * arm-linux-tdep.c: Remove _initialize_arm_linux_tdep prototype. * arm-nbsd-tdep.c: Remove _initialize_arm_netbsd_tdep prototype. * arm-obsd-tdep.c: Remove _initialize_armobsd_tdep prototype. * arm-symbian-tdep.c: Remove _initialize_arm_symbian_tdep prototype. * arm-tdep.c: Remove _initialize_arm_tdep prototype. * arm-wince-tdep.c: Remove _initialize_arm_wince_tdep prototype. * auto-load.c: Remove _initialize_auto_load prototype. * auxv.c: Remove _initialize_auxv prototype. * avr-tdep.c: Remove _initialize_avr_tdep prototype. * ax-gdb.c: Remove _initialize_ax_gdb prototype. * bfin-linux-tdep.c: Remove _initialize_bfin_linux_tdep prototype. * bfin-tdep.c: Remove _initialize_bfin_tdep prototype. * break-catch-sig.c: Remove _initialize_break_catch_sig prototype. * break-catch-syscall.c: Remove _initialize_break_catch_syscall prototype. * break-catch-throw.c: Remove _initialize_break_catch_throw prototype. * breakpoint.c: Remove _initialize_breakpoint prototype. * bsd-uthread.c: Remove _initialize_bsd_uthread prototype. * btrace.c: Remove _initialize_btrace prototype. * charset.c: Remove _initialize_charset prototype. * cli/cli-cmds.c: Remove _initialize_cli_cmds prototype. * cli/cli-dump.c: Remove _initialize_cli_dump prototype. * cli/cli-interp.c: Remove _initialize_cli_interp prototype. * cli/cli-logging.c: Remove _initialize_cli_logging prototype. * cli/cli-script.c: Remove _initialize_cli_script prototype. * coff-pe-read.c: Remove _initialize_coff_pe_read prototype. * coffread.c: Remove _initialize_coffread prototype. * compile/compile.c: Remove _initialize_compile prototype. * complaints.c: Remove _initialize_complaints prototype. * completer.c: Remove _initialize_completer prototype. * copying.awk: Remove _initialize_copying prototype. * copying.c: Regenerate. * core-regset.c: Remove _initialize_core_regset prototype. * corefile.c: Remove _initialize_core prototype. * corelow.c: Remove _initialize_corelow prototype. * cp-abi.c: Remove _initialize_cp_abi prototype. * cp-namespace.c: Remove _initialize_cp_namespace prototype. * cp-support.c: Remove _initialize_cp_support prototype. * cp-valprint.c: Remove _initialize_cp_valprint prototype. * cris-linux-tdep.c: Remove _initialize_cris_linux_tdep prototype. * cris-tdep.c: Remove _initialize_cris_tdep prototype. * ctf.c: Remove _initialize_ctf prototype. * d-lang.c: Remove _initialize_d_language prototype. * darwin-nat-info.c: Remove _initialize_darwin_info_commands prototype. * darwin-nat.c: Remove _initialize_darwin_inferior prototype. * dbxread.c: Remove _initialize_dbxread prototype. * dcache.c: Remove _initialize_dcache prototype. * demangle.c: Remove _initialize_demangler prototype. * disasm-selftests.c: Remove _initialize_disasm_selftests prototype. * disasm.c: Remove _initialize_disasm prototype. * dtrace-probe.c: Remove _initialize_dtrace_probe prototype. * dummy-frame.c: Remove _initialize_dummy_frame prototype. * dwarf2-frame-tailcall.c: Remove _initialize_tailcall_frame prototype. * dwarf2-frame.c: Remove _initialize_dwarf2_frame prototype. * dwarf2expr.c: Remove _initialize_dwarf2expr prototype. * dwarf2loc.c: Remove _initialize_dwarf2loc prototype. * dwarf2read.c: Remove _initialize_dwarf2_read prototype. * elfread.c: Remove _initialize_elfread prototype. * exec.c: Remove _initialize_exec prototype. * extension.c: Remove _initialize_extension prototype. * f-lang.c: Remove _initialize_f_language prototype. * f-valprint.c: Remove _initialize_f_valprint prototype. * fbsd-nat.c: Remove _initialize_fbsd_nat prototype. * fbsd-tdep.c: Remove _initialize_fbsd_tdep prototype. * filesystem.c: Remove _initialize_filesystem prototype. * findcmd.c: Remove _initialize_mem_search prototype. * fork-child.c: Remove _initialize_fork_child prototype. * frame-base.c: Remove _initialize_frame_base prototype. * frame-unwind.c: Remove _initialize_frame_unwind prototype. * frame.c: Remove _initialize_frame prototype. * frv-linux-tdep.c: Remove _initialize_frv_linux_tdep prototype. * frv-tdep.c: Remove _initialize_frv_tdep prototype. * ft32-tdep.c: Remove _initialize_ft32_tdep prototype. * gcore.c: Remove _initialize_gcore prototype. * gdb_bfd.c: Remove _initialize_gdb_bfd prototype. * gdbarch.c: Regenerate. * gdbarch.sh: Remove _initialize_gdbarch prototype. * gdbtypes.c: Remove _initialize_gdbtypes prototype. * gnu-nat.c: Remove _initialize_gnu_nat prototype. * gnu-v2-abi.c: Remove _initialize_gnu_v2_abi prototype. * gnu-v3-abi.c: Remove _initialize_gnu_v3_abi prototype. * go-lang.c: Remove _initialize_go_language prototype. * go32-nat.c: Remove _initialize_go32_nat prototype. * guile/guile.c: Remove _initialize_guile prototype. * h8300-tdep.c: Remove _initialize_h8300_tdep prototype. * hppa-linux-nat.c: Remove _initialize_hppa_linux_nat prototype. * hppa-linux-tdep.c: Remove _initialize_hppa_linux_tdep prototype. * hppa-nbsd-nat.c: Remove _initialize_hppanbsd_nat prototype. * hppa-nbsd-tdep.c: Remove _initialize_hppanbsd_tdep prototype. * hppa-obsd-nat.c: Remove _initialize_hppaobsd_nat prototype. * hppa-obsd-tdep.c: Remove _initialize_hppaobsd_tdep prototype. * hppa-tdep.c: Remove _initialize_hppa_tdep prototype. * i386-bsd-nat.c: Remove _initialize_i386bsd_nat prototype. * i386-cygwin-tdep.c: Remove _initialize_i386_cygwin_tdep prototype. * i386-darwin-tdep.c: Remove _initialize_i386_darwin_tdep prototype. * i386-dicos-tdep.c: Remove _initialize_i386_dicos_tdep prototype. * i386-fbsd-nat.c: Remove _initialize_i386fbsd_nat prototype. * i386-fbsd-tdep.c: Remove _initialize_i386fbsd_tdep prototype. * i386-gnu-nat.c: Remove _initialize_i386gnu_nat prototype. * i386-gnu-tdep.c: Remove _initialize_i386gnu_tdep prototype. * i386-linux-nat.c: Remove _initialize_i386_linux_nat prototype. * i386-linux-tdep.c: Remove _initialize_i386_linux_tdep prototype. * i386-nbsd-nat.c: Remove _initialize_i386nbsd_nat prototype. * i386-nbsd-tdep.c: Remove _initialize_i386nbsd_tdep prototype. * i386-nto-tdep.c: Remove _initialize_i386nto_tdep prototype. * i386-obsd-nat.c: Remove _initialize_i386obsd_nat prototype. * i386-obsd-tdep.c: Remove _initialize_i386obsd_tdep prototype. * i386-sol2-nat.c: Remove _initialize_amd64_sol2_nat prototype. * i386-sol2-tdep.c: Remove _initialize_amd64_sol2_tdep prototype. * i386-tdep.c: Remove _initialize_i386_tdep prototype. * i386-windows-nat.c: Remove _initialize_i386_windows_nat prototype. * ia64-libunwind-tdep.c: Remove _initialize_libunwind_frame prototype. * ia64-linux-nat.c: Remove _initialize_ia64_linux_nat prototype. * ia64-linux-tdep.c: Remove _initialize_ia64_linux_tdep prototype. * ia64-tdep.c: Remove _initialize_ia64_tdep prototype. * ia64-vms-tdep.c: Remove _initialize_ia64_vms_tdep prototype. * infcall.c: Remove _initialize_infcall prototype. * infcmd.c: Remove _initialize_infcmd prototype. * inferior.c: Remove _initialize_inferiors prototype. * inflow.c: Remove _initialize_inflow prototype. * infrun.c: Remove _initialize_infrun prototype. * interps.c: Remove _initialize_interpreter prototype. * iq2000-tdep.c: Remove _initialize_iq2000_tdep prototype. * jit.c: Remove _initialize_jit prototype. * language.c: Remove _initialize_language prototype. * linux-fork.c: Remove _initialize_linux_fork prototype. * linux-nat.c: Remove _initialize_linux_nat prototype. * linux-tdep.c: Remove _initialize_linux_tdep prototype. * linux-thread-db.c: Remove _initialize_thread_db prototype. * lm32-tdep.c: Remove _initialize_lm32_tdep prototype. * m2-lang.c: Remove _initialize_m2_language prototype. * m32c-tdep.c: Remove _initialize_m32c_tdep prototype. * m32r-linux-nat.c: Remove _initialize_m32r_linux_nat prototype. * m32r-linux-tdep.c: Remove _initialize_m32r_linux_tdep prototype. * m32r-tdep.c: Remove _initialize_m32r_tdep prototype. * m68hc11-tdep.c: Remove _initialize_m68hc11_tdep prototype. * m68k-bsd-nat.c: Remove _initialize_m68kbsd_nat prototype. * m68k-bsd-tdep.c: Remove _initialize_m68kbsd_tdep prototype. * m68k-linux-nat.c: Remove _initialize_m68k_linux_tdep prototype. * m68k-linux-tdep.c: Remove _initialize_m68k_linux_tdep prototype. * m68k-tdep.c: Remove _initialize_m68k_tdep prototype. * m88k-bsd-nat.c: Remove _initialize_m68kbsd_nat prototype. * m88k-tdep.c: Remove _initialize_m68kbsd_tdep prototype. * machoread.c: Remove _initialize_machoread prototype. * macrocmd.c: Remove _initialize_macrocmd prototype. * macroscope.c: Remove _initialize_macroscope prototype. * maint.c: Remove _initialize_maint_cmds prototype. * mdebugread.c: Remove _initialize_mdebugread prototype. * memattr.c: Remove _initialize_mem prototype. * mep-tdep.c: Remove _initialize_mep_tdep prototype. * mi/mi-cmd-env.c: Remove _initialize_mi_cmd_env prototype. * mi/mi-cmds.c: Remove _initialize_mi_cmds prototype. * mi/mi-interp.c: Remove _initialize_mi_interp prototype. * mi/mi-main.c: Remove _initialize_mi_main prototype. * microblaze-linux-tdep.c: Remove _initialize_microblaze_linux_tdep prototype. * microblaze-tdep.c: Remove _initialize_microblaze_tdep prototype. * mips-fbsd-nat.c: Remove _initialize_mips_fbsd_nat prototype. * mips-fbsd-tdep.c: Remove _initialize_mips_fbsd_tdep prototype. * mips-linux-nat.c: Remove _initialize_mips_linux_nat prototype. * mips-linux-tdep.c: Remove _initialize_mips_linux_tdep prototype. * mips-nbsd-nat.c: Remove _initialize_mipsnbsd_nat prototype. * mips-nbsd-tdep.c: Remove _initialize_mipsnbsd_tdep prototype. * mips-sde-tdep.c: Remove _initialize_mips_sde_tdep prototype. * mips-tdep.c: Remove _initialize_mips_tdep prototype. * mips64-obsd-nat.c: Remove _initialize_mips64obsd_nat prototype. * mips64-obsd-tdep.c: Remove _initialize_mips64obsd_tdep prototype. * mipsread.c: Remove _initialize_mipsread prototype. * mn10300-linux-tdep.c: Remove _initialize_mn10300_linux_tdep prototype. * mn10300-tdep.c: Remove _initialize_mn10300_tdep prototype. * moxie-tdep.c: Remove _initialize_moxie_tdep prototype. * msp430-tdep.c: Remove _initialize_msp430_tdep prototype. * mt-tdep.c: Remove _initialize_mt_tdep prototype. * nds32-tdep.c: Remove _initialize_nds32_tdep prototype. * nios2-linux-tdep.c: Remove _initialize_nios2_linux_tdep prototype. * nios2-tdep.c: Remove _initialize_nios2_tdep prototype. * nto-procfs.c: Remove _initialize_procfs prototype. * nto-tdep.c: Remove _initialize_nto_tdep prototype. * objc-lang.c: Remove _initialize_objc_language prototype. * objfiles.c: Remove _initialize_objfiles prototype. * observer.c: Remove observer_test_first_notification_function, observer_test_second_notification_function, observer_test_third_notification_function, and _initialize_observer prototypes. * opencl-lang.c: Remove _initialize_opencl_language prototypes. * osabi.c: Remove _initialize_gdb_osabi prototype. * osdata.c: Remove _initialize_osdata prototype. * p-valprint.c: Remove _initialize_pascal_valprint prototype. * parse.c: Remove _initialize_parse prototype. * ppc-fbsd-nat.c: Remove _initialize_ppcfbsd_nat prototype. * ppc-fbsd-tdep.c: Remove _initialize_ppcfbsd_tdep prototype. * ppc-linux-nat.c: Remove _initialize_ppc_linux_nat prototype. * ppc-linux-tdep.c: Remove _initialize_ppc_linux_tdep prototype. * ppc-nbsd-nat.c: Remove _initialize_ppcnbsd_nat prototype. * ppc-nbsd-tdep.c: Remove _initialize_ppcnbsd_tdep prototype. * ppc-obsd-nat.c: Remove _initialize_ppcobsd_nat prototype. * ppc-obsd-tdep.c: Remove _initialize_ppcobsd_tdep prototype. * printcmd.c: Remove _initialize_printcmd prototype. * probe.c: Remove _initialize_probe prototype. * proc-api.c: Remove _initialize_proc_api prototype. * proc-events.c: Remove _initialize_proc_events prototype. * proc-service.c: Remove _initialize_proc_service prototype. * procfs.c: Remove _initialize_procfs prototype. * psymtab.c: Remove _initialize_psymtab prototype. * python/python.c: Remove _initialize_python prototype. * ravenscar-thread.c: Remove _initialize_ravenscar prototype. * record-btrace.c: Remove _initialize_record_btrace prototype. * record-full.c: Remove _initialize_record_full prototype. * record.c: Remove _initialize_record prototype. * regcache.c: Remove _initialize_regcache prototype. * reggroups.c: Remove _initialize_reggroup prototype. * remote-notif.c: Remove _initialize_notif prototype. * remote-sim.c: Remove _initialize_remote_sim prototype. * remote.c: Remove _initialize_remote prototype. * reverse.c: Remove _initialize_reverse prototype. * rl78-tdep.c: Remove _initialize_rl78_tdep prototype. * rs6000-aix-tdep.c: Remove _initialize_rs6000_aix_tdep prototype. * rs6000-lynx178-tdep.c: Remove _initialize_rs6000_lynx178_tdep prototype. * rs6000-nat.c: Remove _initialize_rs6000_nat prototype. * rs6000-tdep.c: Remove _initialize_rs6000_tdep prototype. * rust-exp.y: Remove _initialize_rust_exp prototype. * rx-tdep.c: Remove _initialize_rx_tdep prototype. * s390-linux-nat.c: Remove _initialize_s390_nat prototype. * s390-linux-tdep.c: Remove _initialize_s390_tdep prototype. * score-tdep.c: Remove _initialize_score_tdep prototype. * selftest-arch.c: Remove _initialize_selftests_foreach_arch prototype. * ser-go32.c: Remove _initialize_ser_dos prototype. * ser-mingw.c: Remove _initialize_ser_windows prototype. * ser-pipe.c: Remove _initialize_ser_pipe prototype. * ser-tcp.c: Remove _initialize_ser_tcp prototype. * ser-unix.c: Remove _initialize_ser_hardwire prototype. * serial.c: Remove _initialize_serial prototype. * sh-linux-tdep.c: Remove _initialize_sh_linux_tdep prototype. * sh-nbsd-nat.c: Remove _initialize_shnbsd_nat prototype. * sh-nbsd-tdep.c: Remove _initialize_shnbsd_tdep prototype. * sh-tdep.c: Remove _initialize_sh_tdep prototype. * skip.c: Remove _initialize_step_skip prototype. * sol-thread.c: Remove _initialize_sol_thread prototype. * solib-aix.c: Remove _initialize_solib_aix prototype. * solib-darwin.c: Remove _initialize_darwin_solib prototype. * solib-dsbt.c: Remove _initialize_dsbt_solib prototype. * solib-frv.c: Remove _initialize_frv_solib prototype. * solib-spu.c: Remove _initialize_spu_solib prototype. * solib-svr4.c: Remove _initialize_svr4_solib prototype. * solib-target.c: Remove _initialize_solib_target prototype. * solib.c: Remove _initialize_solib prototype. * source.c: Remove _initialize_source prototype. * sparc-linux-nat.c: Remove _initialize_sparc_linux_nat prototype. * sparc-linux-tdep.c: Remove _initialize_sparc_linux_tdep prototype. * sparc-nat.c: Remove _initialize_sparc_nat prototype. * sparc-nbsd-nat.c: Remove _initialize_sparcnbsd_nat prototype. * sparc-nbsd-tdep.c: Remove _initialize_sparcnbsd_tdep prototype. * sparc-obsd-tdep.c: Remove _initialize_sparc32obsd_tdep prototype. * sparc-sol2-nat.c: Remove _initialize_sparc_sol2_nat prototype. * sparc-sol2-tdep.c: Remove _initialize_sparc_sol2_tdep prototype. * sparc-tdep.c: Remove _initialize_sparc_tdep prototype. * sparc64-fbsd-nat.c: Remove _initialize_sparc64fbsd_nat prototype. * sparc64-fbsd-tdep.c: Remove _initialize_sparc64fbsd_tdep prototype. * sparc64-linux-nat.c: Remove _initialize_sparc64_linux_nat prototype. * sparc64-linux-tdep.c: Remove _initialize_sparc64_linux_tdep prototype. * sparc64-nat.c: Remove _initialize_sparc64_nat prototype. * sparc64-nbsd-nat.c: Remove _initialize_sparc64nbsd_nat prototype. * sparc64-nbsd-tdep.c: Remove _initialize_sparc64nbsd_tdep prototype. * sparc64-obsd-nat.c: Remove _initialize_sparc64obsd_nat prototype. * sparc64-obsd-tdep.c: Remove _initialize_sparc64obsd_tdep prototype. * sparc64-sol2-tdep.c: Remove _initialize_sparc64_sol2_tdep prototype. * spu-linux-nat.c: Remove _initialize_spu_nat prototype. * spu-multiarch.c: Remove _initialize_spu_multiarch prototype. * spu-tdep.c: Remove _initialize_spu_tdep prototype. * stabsread.c: Remove _initialize_stabsread prototype. * stack.c: Remove _initialize_stack prototype. * stap-probe.c: Remove _initialize_stap_probe prototype. * std-regs.c: Remove _initialize_frame_reg prototype. * symfile-debug.c: Remove _initialize_symfile_debug prototype. * symfile-mem.c: Remove _initialize_symfile_mem prototype. * symfile.c: Remove _initialize_symfile prototype. * symmisc.c: Remove _initialize_symmisc prototype. * symtab.c: Remove _initialize_symtab prototype. * target-dcache.c: Remove _initialize_target_dcache prototype. * target-descriptions.c: Remove _initialize_target_descriptions prototype. * thread.c: Remove _initialize_thread prototype. * tic6x-linux-tdep.c: Remove _initialize_tic6x_linux_tdep prototype. * tic6x-tdep.c: Remove _initialize_tic6x_tdep prototype. * tilegx-linux-nat.c: Remove _initialize_tile_linux_nat prototype. * tilegx-linux-tdep.c: Remove _initialize_tilegx_linux_tdep prototype. * tilegx-tdep.c: Remove _initialize_tilegx_tdep prototype. * tracefile-tfile.c: Remove _initialize_tracefile_tfile prototype. * tracefile.c: Remove _initialize_tracefile prototype. * tracepoint.c: Remove _initialize_tracepoint prototype. * tui/tui-hooks.c: Remove _initialize_tui_hooks prototype. * tui/tui-interp.c: Remove _initialize_tui_interp prototype. * tui/tui-layout.c: Remove _initialize_tui_layout prototype. * tui/tui-regs.c: Remove _initialize_tui_regs prototype. * tui/tui-stack.c: Remove _initialize_tui_stack prototype. * tui/tui-win.c: Remove _initialize_tui_win prototype. * tui/tui.c: Remove _initialize_tui prototype. * typeprint.c: Remove _initialize_typeprint prototype. * user-regs.c: Remove _initialize_user_regs prototype. * utils.c: Remove _initialize_utils prototype. * v850-tdep.c: Remove _initialize_v850_tdep prototype. * valarith.c: Remove _initialize_valarith prototype. * valops.c: Remove _initialize_valops prototype. * valprint.c: Remove _initialize_valprint prototype. * value.c: Remove _initialize_values prototype. * varobj.c: Remove _initialize_varobj prototype. * vax-bsd-nat.c: Remove _initialize_vaxbsd_nat prototype. * vax-nbsd-tdep.c: Remove _initialize_vaxnbsd_tdep prototype. * vax-tdep.c: Remove _initialize_vax_tdep prototype. * windows-nat.c: Remove _initialize_windows_nat, _initialize_check_for_gdb_ini, and _initialize_loadable prototypes. * windows-tdep.c: Remove _initialize_windows_tdep prototype. * xcoffread.c: Remove _initialize_xcoffread prototype. * xml-support.c: Remove _initialize_xml_support prototype. * xstormy16-tdep.c: Remove _initialize_xstormy16_tdep prototype. * xtensa-linux-nat.c: Remove _initialize_xtensa_linux_nat prototype. * xtensa-linux-tdep.c: Remove _initialize_xtensa_linux_tdep prototype. * xtensa-tdep.c: Remove _initialize_xtensa_tdep prototype. |
|
|
Pedro Alves
|
eb3ff9a551 |
Introduce class completion_tracker & rewrite completion<->readline interaction
This patch reworks the whole completion machinery, and prepares it for later enhancements. Adds a new "completion_tracker" class that is meant to hold everything about the state of the current completion operation. This class now has the responsibility of tracking the list of completion matches, and checking whether the max completions limit has been reached. You can look at this as this patch starting out by C++fying the existing "completion_tracker" in symtab.c (it's just an htab_t typedef currently), moving it to completer.h/c, and then making it a class/generalizing/enhancing it. Unlike with the current tracking, completion_tracker now checks whether the limit has been reached on each completion match list insertion. This both simplifies the max-completions handling code (maybe_add_completion_enum is gone, for example), and is a prerequisite for follow up patches. The current completion_tracker is only used for symbol completions, and the symbol code gets at the current instance via globals. This patch cleans that up by adding a completion_tracker reference to the signature of the completion functions, and passing the tracker around everywhere necessary. Then, the patch changes how the completion match list is handed over to readline. Currently, we're using the rl_completion_entry_function readline entry point, and the patch switches to rl_attempted_completion_function. A following patch will want to let GDB itself decide the common completion prefix between all matches (what readline calls the "lowest common denominator"), instead of having readline compute it, and that's not possible with the rl_completion_entry_function entry point. Also, rl_attempted_completion_function lets GDB hand over the match list to readline as an array in one go instead of passing down matches one by one, so from that angle it's a nicer entry point anyway. Lastly, the patch catches exceptions around the readline entry points, because we can't let C++ exceptions cross readline. We handle that in the readline input entry point, but the completion entry point isn't guarded, so GDB can abort if completion throws. E.g., in current master: (gdb) b -function "fun<tab> terminate called after throwing an instance of 'gdb_exception_RETURN_MASK_ERROR' Aborted (core dumped) This patch fixes that. This will be exercised in the new tests added later on in the series. gdb/ChangeLog: 2017-07-17 Pedro Alves <palves@redhat.com> * ada-lang.c (symbol_completion_match): Adjust comments. (symbol_completion_add): Replace vector parameter with completion_tracker parameter. Use it. (ada_make_symbol_completion_list): Rename to... (ada_collect_symbol_completion_matches): ... this. Add completion_tracker parameter and use it. (ada_language_defn): Adjust. * break-catch-syscall.c (catch_syscall_completer): Adjust prototype and work with completion_tracker instead of VEC. * breakpoint.c (condition_completer): Adjust prototype and work with completion_tracker instead of VEC. * c-lang.c (c_language_defn, cplus_language_defn) (asm_language_defn, minimal_language_defn): Adjust to renames. * cli/cli-cmds.c (complete_command): Rework using completion_tracker. Catch exceptions when completing. * cli/cli-decode.c (integer_unlimited_completer) (complete_on_cmdlist, complete_on_enum): Adjust prototype and work with completion_tracker instead of VEC. * command.h (struct completion_tracker): Forward declare. (completer_ftype, completer_handle_brkchars_ftype): Change types. (complete_on_cmdlist, complete_on_enum): Adjust. * completer.c: Include <algorithm>. (struct gdb_completer_state): New. (current_completion): New global. (readline_line_completion_function): Delete. (noop_completer, filename_completer) (filename_completer_handle_brkchars, complete_files_symbols) (linespec_location_completer): Adjust to work with a completion_tracker instead of a VEC. (string_or_empty): New. (collect_explicit_location_matches): Adjust to work with a completion_tracker instead of a VEC. (explicit_location_completer): Rename to ... (complete_explicit_location): ... this and adjust to work with a completion_tracker instead of a VEC. (location_completer): Adjust to work with a completion_tracker instead of a VEC. (add_struct_fields): Adjust to work with a completion_list instead of VEC. (expression_completer): Rename to ... (complete_expression): ... this and adjust to work with a completion_tracker instead of a VEC. Use complete_files_symbols. (expression_completer): Reimplement on top of complete_expression. (symbol_completer): Adjust to work with a completion_tracker instead of a VEC. (enum complete_line_internal_reason): Add describing comments. (complete_line_internal_normal_command): Adjust to work with a completion_tracker instead of a VEC. (complete_line_internal): Rename to ... (complete_line_internal_1): ... this and adjust to work with a completion_tracker instead of a VEC. Assert TEXT is NULL in the handle_brkchars phase. (new_completion_tracker): Delete. (complete_line_internal): Reimplement as TRY/CATCH wrapper around complete_line_internal_1. (free_completion_tracker): Delete. (INITIAL_COMPLETION_HTAB_SIZE): New. (completion_tracker::completion_tracker) (completion_tracker::~completion_tracker): New. (maybe_add_completion): Delete. (completion_tracker::maybe_add_completion) (completion_tracker::add_completion) (completion_tracker::add_completions): New. (throw_max_completions_reached_error): Delete. (complete_line): Adjust to work with a completion_tracker instead of a VEC. Don't create a completion_tracker_t or check for max completions here. (command_completer, command_completer_handle_brkchars) (signal_completer, reg_or_group_completer_1) (reg_or_group_completer, default_completer_handle_brkchars): Adjust to work with a completion_tracker. (gdb_completion_word_break_characters_throw): New. (gdb_completion_word_break_characters): Reimplement. (line_completion_function): Delete. (completion_tracker::recompute_lowest_common_denominator) (expand_preserving_ws) (completion_tracker::build_completion_result) (completion_result::completion_result) (completion_result::completion_result) (completion_result::~completion_result) (completion_result::completion_result) (completion_result::release_match_list, compare_cstrings) (completion_result::sort_match_list) (completion_result::reset_match_list) (gdb_rl_attempted_completion_function_throw) (gdb_rl_attempted_completion_function): New. * completer.h (completion_list, struct completion_result) (class completion_tracker): New. (complete_line): Add completion_tracker parameter. (readline_line_completion_function): Delete. (gdb_rl_attempted_completion_function): New. (noop_completer, filename_completer, expression_completer) (location_completer, symbol_completer, command_completer) (signal_completer, reg_or_group_completer): Update prototypes. (completion_tracker_t, new_completion_tracker) (make_cleanup_free_completion_tracker): Delete. (enum maybe_add_completion_enum): Delete. (maybe_add_completion): Delete. (throw_max_completions_reached_error): Delete. * corefile.c (complete_set_gnutarget): Adjust to work with a completion_tracker instead of a VEC. * cp-abi.c (cp_abi_completer): Adjust to work with a completion_tracker instead of a VEC. * d-lang.c (d_language_defn): Adjust. * disasm.c (disassembler_options_completer): Adjust to work with a completion_tracker instead of a VEC. * f-lang.c (f_make_symbol_completion_list): Rename to ... (f_collect_symbol_completion_matches): ... this. Adjust to work with a completion_tracker instead of a VEC. (f_language_defn): Adjust. * go-lang.c (go_language_defn): Adjust. * guile/scm-cmd.c (cmdscm_add_completion, cmdscm_completer): Adjust to work with a completion_tracker instead of a VEC. * infrun.c (handle_completer): Likewise. * interps.c (interpreter_completer): Likewise. * interps.h (interpreter_completer): Likewise. * language.c (unknown_language_defn, auto_language_defn) (local_language_defn): Adjust. * language.h (language_defn::la_make_symbol_completion_list): Rename to ... (language_defn::la_collect_symbol_completion_matches): ... this and adjust to work with a completion_tracker instead of a VEC. * m2-lang.c (m2_language_defn): Adjust. * objc-lang.c (objc_language_defn): Adjust. * opencl-lang.c (opencl_language_defn): Adjust. * p-lang.c (pascal_language_defn): Adjust. * python/py-cmd.c (cmdpy_completer_helper): Handle NULL word. (cmdpy_completer_handle_brkchars, cmdpy_completer): Adjust to work with a completion_tracker. * rust-lang.c (rust_language_defn): Adjust. * symtab.c (free_completion_list, do_free_completion_list) (return_val, completion_tracker): Delete. (completion_list_add_name, completion_list_add_symbol) (completion_list_add_msymbol, completion_list_objc_symbol) (completion_list_add_fields, add_symtab_completions): Add completion_tracker parameter and use it. (default_make_symbol_completion_list_break_on_1): Rename to... (default_collect_symbol_completion_matches_break_on): ... this. Add completion_tracker parameter and use it instead of allocating a completion tracker here. (default_make_symbol_completion_list_break_on): Delete old implementation. (default_make_symbol_completion_list): Delete. (default_collect_symbol_completion_matches): New. (make_symbol_completion_list): Delete. (collect_symbol_completion_matches): New. (make_symbol_completion_type): Rename to ... (collect_symbol_completion_matches_type): ... this. Add completion_tracker parameter and use it instead of VEC. (make_file_symbol_completion_list_1): Rename to... (collect_file_symbol_completion_matches): ... this. Add completion_tracker parameter and use it instead of VEC. (make_file_symbol_completion_list): Delete. (add_filename_to_list): Use completion_list instead of a VEC. (add_partial_filename_data::list): Now a completion_list. (make_source_files_completion_list): Work with a completion_list instead of a VEC. * symtab.h: Include "completer.h". (default_make_symbol_completion_list_break_on) (default_make_symbol_completion_list, make_symbol_completion_list) (make_symbol_completion_type, make_file_symbol_completion_list) (make_source_files_completion_list): Delete. (default_collect_symbol_completion_matches_break_on) (default_collect_symbol_completion_matches) (collect_symbol_completion_matches) (collect_symbol_completion_matches_type) (collect_file_symbol_completion_matches) (make_source_files_completion_list): New. * top.c (init_main): Don't install a rl_completion_entry_function hook. Install a rl_attempted_completion_function hook instead. * tui/tui-layout.c (layout_completer): Adjust to work with a completion_tracker. * tui/tui-regs.c (tui_reggroup_completer): * tui/tui-win.c (window_name_completer, focus_completer) (winheight_completer): Adjust to work with a completion_tracker. * value.c: Include "completer.h". (complete_internalvar): Adjust to work with a completion_tracker. * value.h (complete_internalvar): Likewise. |
|
Artemiy Volkov
|
aa0061181a |
Convert lvalue reference type check to general reference type check
In almost all contexts (except for overload resolution rules and expression semantics), lvalue and rvalue references are equivalent. That means that in all but these cases we can replace a TYPE_CODE_REF check to a TYPE_IS_REFERENCE check and, for switch statements, add a case label for a rvalue reference type next to a case label for an lvalue reference type. This patch does exactly that. gdb/ChangeLog PR gdb/14441 * aarch64-tdep.c (aarch64_type_align) (aarch64_extract_return_value, aarch64_store_return_value): Change lvalue reference type checks to general reference type checks. * amd64-tdep.c (amd64_classify): Likewise. * amd64-windows-tdep.c (amd64_windows_passed_by_integer_register): Likewise. * arm-tdep.c (arm_type_align, arm_extract_return_value) (arm_store_return_value): Likewise. * ax-gdb.c (gen_fetch, gen_cast): Likewise. * c-typeprint.c (c_print_type): Likewise. * c-varobj.c (adjust_value_for_child_access, c_value_of_variable) (cplus_number_of_children, cplus_describe_child): Likewise. * compile/compile-c-symbols.c (generate_vla_size): Likewise. * completer.c (expression_completer): Likewise. * cp-support.c (make_symbol_overload_list_adl_namespace): Likewise. * darwin-nat-info.c (info_mach_region_command): Likewise. * dwarf2loc.c (entry_data_value_coerce_ref) (value_of_dwarf_reg_entry): Likewise. * eval.c (ptrmath_type_p, evaluate_subexp_standard) (evaluate_subexp_for_address, evaluate_subexp_for_sizeof): Likewise. * findvar.c (extract_typed_address, store_typed_address): Likewise. * gdbtypes.c (rank_one_type): Likewise. * hppa-tdep.c (hppa64_integral_or_pointer_p): Likewise. * infcall.c (value_arg_coerce): Likewise. * language.c (pointer_type): Likewise. * m32c-tdep.c (m32c_reg_arg_type, m32c_m16c_address_to_pointer): Likewise. * m88k-tdep.c (m88k_integral_or_pointer_p): Likewise. * mn10300-tdep.c (mn10300_type_align): Likewise. * msp430-tdep.c (msp430_push_dummy_call): Likewise. * ppc-sysv-tdep.c (do_ppc_sysv_return_value) (ppc64_sysv_abi_push_param, ppc64_sysv_abi_return_value): Likewise. * printcmd.c (print_formatted, x_command): Likewise. * python/py-type.c (typy_get_composite, typy_template_argument): Likewise. * python/py-value.c (valpy_referenced_value) (valpy_get_dynamic_type, value_has_field): Likewise. * s390-linux-tdep.c (s390_function_arg_integer): Likewise. * sparc-tdep.c (sparc_integral_or_pointer_p): Likewise. * sparc64-tdep.c (sparc64_integral_or_pointer_p): Likewise. * spu-tdep.c (spu_scalar_value_p): Likewise. * symtab.c (lookup_symbol_aux): Likewise. * typeprint.c (whatis_exp, print_type_scalar): Likewise. * valarith.c (binop_types_user_defined_p, unop_user_defined_p): Likewise. * valops.c (value_cast_pointers, value_cast) (value_reinterpret_cast, value_dynamic_cast, value_addr, typecmp) (value_struct_elt, value_struct_elt_bitpos) (value_find_oload_method_list, find_overload_match) (value_rtti_indirect_type): Likewise. * valprint.c (val_print_scalar_type_p, generic_val_print): Likewise. * value.c (value_actual_type, value_as_address, unpack_long) (pack_long, pack_unsigned_long, coerce_ref_if_computed) (coerce_ref): Likewise. * varobj.c (varobj_get_value_type): Likewise. |
|
|
Joel Brobecker
|
61baf725ec |
update copyright year range in GDB files
This applies the second part of GDB's End of Year Procedure, which
updates the copyright year range in all of GDB's files.
gdb/ChangeLog:
Update copyright year range in all GDB files.
|
|
|
Yao Qi
|
7c2ba67e6a |
Assert on lval_register
This patch adds asserts where the value's lval must be lval_register. This triggers an error in frame_register_unwind because VALUE_REGNUM is used but value's lval is not lval_register. This also reveals a design issue in frame_register_unwind, that is arguments addrp and realnump are mutually exclusive, we either use addrp (for lval_memory), or use realnump (for lval_register). This can be done in a separate patch. gdb: 2016-12-06 Yao Qi <yao.qi@linaro.org> * frame.c (frame_register_unwind): Set *realnump if *lvalp is lval_register. * value.c (deprecated_value_next_frame_id_hack): Assert value->lval is lval_register. (deprecated_value_regnum_hack): Likewise. |
|
|
Yao Qi
|
1a08844158 |
Restrict checking value.lval on using address
With the previous change, value.location.address is only valid for lval_memory. This patch restrict some checking on value.lval on using address. Since we have a check on VALUE_VAL in set_value_address, we need to set VALUE_VAL properly before set_value_address too. gdb: 2016-11-25 Yao Qi <yao.qi@linaro.org> * ada-lang.c (ensure_lval): Call set_value_address after setting VALUE_LVAL. * elfread.c (elf_gnu_ifunc_resolve_addr): Set VALUE_LVAL to lval_memory. (elf_gnu_ifunc_resolver_return_stop): Likewise. * value.c (value_fn_field): Likewise. (value_from_contents_and_address_unresolved): Likewise. (value_from_contents_and_address): Likewise. (value_address): Check value->lval isn't lval_memory. (value_raw_address): Likewise. (set_value_address): Assert value->lval is lval_memory. |
|
|
Yao Qi
|
7dc54575d9 |
Adjust Value.location for lval_register
value.regnum and value.next_frame_id are only used for lval_register, so this patch moves them to union value.location. As a result, when we copy value, only copy location, don't need to copy regnum and next_frame_id. This patch also changes regnum's type to int as there is no space constraint, so update deprecated_value_regnum_hack return type too. gdb: 2016-11-28 Yao Qi <yao.qi@linaro.org> * valops.c (value_slice): Don't set frame id of slice. * value.c (struct value) <regnum, next_frame_id>: Move them to... (struct value) <location>: ... here. Update comments. (allocate_value_lazy): Don't set frame id and regnum. (deprecated_value_next_frame_id_hack): Adjust. (deprecated_value_regnum_hack): Adjust. (value_copy): Don't copy frame id and regnu. (value_primitive_field): Likewise. (value_from_component): Likewise. (deprecated_value_regnum_hack): Return int *. * value.h (deprecated_value_regnum_hack): Update declaration. |
|
|
Yao Qi
|
c5acd81596 |
Use VALUE_NEXT_FRAME_ID in value_from_component
We renamed VALUE_FRAME_ID to VALUE_NEXT_FRAME_ID recently, https://sourceware.org/ml/gdb-patches/2016-11/msg00018.html and we should use VALUE_NEXT_FRAME_ID in value_from_component too. gdb: 2016-11-22 Yao Qi <yao.qi@linaro.org> * value.c (value_from_component): Use VALUE_NEXT_FRAME_ID instead of VALUE_FROM_ID. |
|
|
Yao Qi
|
3fff9862d5 |
Create subobject value in pretty printer
Nowadays, we create a value of subobject in pretty printer with 'address'
being used,
value = value_from_contents_and_address (type, valaddr + embedded_offset,
address + embedded_offset);
set_value_component_location (value, val);
/* set_value_component_location resets the address, so we may
need to set it again. */
if (VALUE_LVAL (value) != lval_internalvar
&& VALUE_LVAL (value) != lval_internalvar_component
&& VALUE_LVAL (value) != lval_computed)
set_value_address (value, address + embedded_offset);
value_from_contents_and_address creates a value from memory, but the
value we are pretty-printing may not from memory at all.
Instead of using value_from_contents_and_address, we create a value
of subobject with the same location as object's but different offset.
We avoid using address in this way. As a result, parameter 'address'
in apply_val_pretty_printer is no longer needed, we can remove it in
next step.
We've already had the location of the 'whole' value, so it is safe
to assume we can create a value of 'component' or 'suboject' value
at the same location but with different offset.
gdb:
2016-11-21 Yao Qi <yao.qi@linaro.org>
* guile/scm-pretty-print.c (gdbscm_apply_val_pretty_printer):
Don't call value_from_contents_and_address and
set_value_address. Call value_from_component.
* python/py-prettyprint.c (gdbpy_apply_val_pretty_printer):
Likewise.
* value.c (value_from_component): New function.
* value.h (value_from_component): Likewise.
* valarith.c (value_subscripted_rvalue): Call
value_from_component.
|
|
|
Kevin Buettner
|
41b56feb50 |
Change meaning of VALUE_FRAME_ID; rename to VALUE_NEXT_FRAME_ID
The VALUE_FRAME_ID macro provides access to a member in struct value that's used to hold the frame id that's used when determining a register's value or when assigning to a register. The underlying member has a long and obscure name. I won't refer to it here, but will simply refer to VALUE_FRAME_ID as if it's the struct value member instead of being a convenient macro. At the moment, without this patch in place, VALUE_FRAME_ID is set in value_of_register_lazy() and several other locations to hold the frame id of the frame passed to those functions. VALUE_FRAME_ID is used in the lval_register case of value_fetch_lazy(). To fetch the register's value, it calls get_frame_register_value() which, in turn, calls frame_unwind_register_value() with frame->next. A python based unwinder may wish to determine the value of a register or evaluate an expression containing a register. When it does this, value_fetch_lazy() will be called under some circumstances. It will attempt to determine the frame id associated with the frame passed to it. In so doing, it will end up back in the frame sniffer of the very same python unwinder that's attempting to learn the value of a register as part of the sniffing operation. This recursion is not desirable. As noted above, when value_fetch_lazy() wants to fetch a register's value, it does so (indirectly) by unwinding from frame->next. With this in mind, a solution suggests itself: Change VALUE_FRAME_ID to hold the frame id associated with the next frame. Then, when it comes time to obtain the value associated with the register, we can simply unwind from the frame corresponding to the frame id stored in VALUE_FRAME_ID. This neatly avoids the python unwinder recursion problem by changing when the "next" operation occurs. Instead of the "next" operation occuring when the register value is fetched, it occurs earlier on when assigning a frame id to VALUE_FRAME_ID. (Thanks to Pedro for this suggestion.) This patch implements this idea. It builds on the patch "Distinguish sentinel frame from null frame". Without that work in place, it's necessary to check for null_id at several places and then obtain the sentinel frame. It also renames most occurences of VALUE_FRAME_ID to VALUE_NEXT_FRAME_ID to reflect the new meaning of this field. There are several uses of VALUE_FRAME_ID which were not changed. In each case, the original meaning of VALUE_FRAME_ID is required to get correct results. In all but one of these uses, either put_frame_register_bytes() or get_frame_register_bytes() is being called with the frame value obtained from VALUE_FRAME_ID. Both of these functions perform some unwinding by performing a "->next" operation on the frame passed to it. If we were to use the new VALUE_NEXT_FRAME_ID macro, this would effectively do two "->next" operations, which is not what we want. The VALUE_FRAME_ID macro has been redefined in terms of VALUE_NEXT_FRAME_ID. It simply fetches the previous frame's id, providing this id as the value of the macro. gdb/ChangeLog: * value.h (VALUE_FRAME_ID): Rename to VALUE_NEXT_FRAME_ID. Update comment. Create new VALUE_FRAME_ID which is defined in terms of VALUE_NEXT_FRAME_ID. (deprecated_value_frame_id_hack): Rename to deprecated_value_next_frame_id_hack. * dwarf2loc.c, findvar.c, frame-unwind.c, sentinel-frame.c, valarith.c, valops.c, value.c: Adjust nearly all occurences of VALUE_FRAME_ID to VALUE_NEXT_FRAME_ID. Add comments for those which did not change. * value.c (struct value): Rename frame_id field to next_frame_id. Update comment. (deprecated_value_frame_id_hack): Rename to deprecated_value_next_frame_id_hack. (value_fetch_lazy): Call frame_unwind_register_value() instead of get_frame_register_value(). * frame.c (get_prev_frame_id_by_id): New function. * frame.h (get_prev_frame_id_by_id): Declare. * dwarf2loc.c (dwarf2_evaluate_loc_desc_full): Make VALUE_NEXT_FRAME_ID refer to the next frame. * findvar.c (value_of_register_lazy): Likewise. (default_value_from_register): Likewise. (value_from_register): Likewise. * frame_unwind.c (frame_unwind_got_optimized): Likewise. * sentinel-frame.c (sentinel_frame_prev_register): Likewise. * value.h (VALUE_FRAME_ID): Update comment describing this macro. |
|
|
Pedro Alves
|
4d01a485d2 |
'struct expression *' -> gdb::unique_xmalloc_ptr<expression>
This patch makes parse_expression and friends return a unique_ptr
instead of raw pointer [1]:
typedef gdb::unique_malloc_ptr<expression> expression_up;
and then adjusts the codebase throughout to stop using cleanups to
manage lifetime of expression pointers.
Whenever I found a structure owning an expression pointer, I made it
store a unique_ptr instead of a raw pointer, which then requires using
new/delete of the holding structure, instead of XNEW/xfree.
[1] - I'd like to set the rule that types named with an "_up" suffix
are unique_ptr typedefs.
Note I used gdb::unique_xmalloc_ptr instead of gdb::unique_ptr, simply
because we still use xmalloc instead of new to allocate expression
objects. Once that's changed, all we need to do is change the
expression_up typedef and the smart pointer will then call delete
instead of xfree.
gdb/ChangeLog:
2016-11-08 Pedro Alves <palves@redhat.com>
* ada-lang.c (ada_read_renaming_var_value): Use expression_up.
(struct ada_catchpoint_location) <excep_cond_expr>: Now an
expression_up.
(ada_catchpoint_location_dtor): Reset excep_cond_expr instead of
using xfree.
(create_excep_cond_exprs): Use expression_up and gdb::move.
(allocate_location_exception): Use new instead of XNEW.
(should_stop_exception): Likewise. Adjust to use expression_up.
(create_ada_exception_catchpoint): Use new instead of XNEW.
* ax-gdb.c (agent_eval_command_one): Use expression_up instead of
cleanups.
(maint_agent_printf_command): Use expression_up.
* break-catch-sig.c (create_signal_catchpoint): Use new instead of
XNEW.
* break-catch-syscall.c (create_syscall_event_catchpoint):
Likewise.
* break-catch-throw.c (handle_gnu_v3_exceptions): Use new instead
of XCNEW. Use gdb::unique_ptr instead of cleanups.
* breakpoint.c (set_breakpoint_condition, update_watchpoint)
(parse_cmd_to_aexpr, watchpoint_check)
(bpstat_check_breakpoint_conditions, watchpoint_locations_match):
Adjust to use expression_up.
(init_bp_location): Adjust.
(free_bp_location): Use delete instead of xfree.
(set_raw_breakpoint_without_location, set_raw_breakpoint)
(add_solib_catchpoint, create_fork_vfork_event_catchpoint)
(new_single_step_breakpoint, create_breakpoint_sal): Use new
instead of XNEW.
(find_condition_and_thread): Adjust to use expression_up.
(create_breakpoint): Use new instead of XNEW.
(dtor_watchpoint): Don't xfree expression pointers, they're
unique_ptr's now.
(insert_watchpoint, remove_watchpoint): Adjust.
(watch_command_1): Use expression_up. Use new instead of XCNEW.
(catch_exec_command_1): Use new instead of XNEW.
(bp_location_dtor): Don't xfree expression pointers, they're
unique_ptr's now.
(base_breakpoint_allocate_location)
(strace_marker_create_breakpoints_sal): Use new instead of XNEW.
(delete_breakpoint): Use delete instead of xfree.
* breakpoint.h (struct bp_location) <cond>: Now an
unique_ptr<expression> instead of a raw pointer.
(struct watchpoint) <exp, cond_exp>: Likewise.
* cli/cli-script.c (execute_control_command): Use expression_up
instead of cleanups.
* dtrace-probe.c (dtrace_process_dof_probe): Use expression_up.
* eval.c (parse_and_eval_address, parse_and_eval_long)
(parse_and_eval, parse_to_comma_and_eval, parse_and_eval_type):
Use expression_up instead of cleanups.
* expression.h (expression_up): New typedef.
(parse_expression, parse_expression_with_language, parse_exp_1):
Change return type to expression_up.
* mi/mi-main.c (mi_cmd_data_evaluate_expression)
(print_variable_or_computed): Use expression_up.
* objc-lang.c (print_object_command): Use expression_up instead of
cleanups.
* parse.c (parse_exp_1, parse_exp_in_context)
(parse_exp_in_context_1, parse_expression)
(parse_expression_with_language): Return an expression_up instead
of a raw pointer.
(parse_expression_for_completion): Use expression_up.
* printcmd.c (struct display) <exp>: Now an expression_up instead
of a raw pointer.
(print_command_1, output_command_const, set_command, x_command):
Use expression_up instead of cleanups.
(display_command): Likewise. Use new instead of XNEW.
(free_display): Use delete instead of xfree.
(do_one_display): Adjust to use expression_up.
* remote.c (remote_download_tracepoint): Likewise.
* stack.c (return_command): Likewise.
* tracepoint.c (validate_actionline, encode_actions_1): Use
expression_up instead of cleanups.
* typeprint.c (whatis_exp, maintenance_print_type): Likewise.
* value.c (init_if_undefined_command): Likewise.
* varobj.c (struct varobj_root) <exp>: Now an expression_up
instead of a raw pointer.
(varobj_create): Adjust.
(varobj_set_value): Use an expression_up instead of cleanups.
(new_root_variable): Use new instead of XNEW.
(free_variable): Use delete instead of xfree.
(value_of_root_1): Use std::swap.
|
|
|
Pedro Alves
|
325fac504a |
gdb: Use std::min and std::max throughout
Otherwise including <string> or some other C++ header is broken.
E.g.:
In file included from /opt/gcc/include/c++/7.0.0/bits/char_traits.h:39:0,
from /opt/gcc/include/c++/7.0.0/string:40,
from /home/pedro/gdb/mygit/cxx-convertion/src/gdb/infrun.c:68:
/opt/gcc/include/c++/7.0.0/bits/stl_algobase.h:243:56: error: macro "min" passed 3 arguments, but takes just 2
min(const _Tp& __a, const _Tp& __b, _Compare __comp)
^
/opt/gcc/include/c++/7.0.0/bits/stl_algobase.h:265:56: error: macro "max" passed 3 arguments, but takes just 2
max(const _Tp& __a, const _Tp& __b, _Compare __comp)
^
In file included from .../src/gdb/infrun.c:21:0:
To the best of my grepping abilities, I believe I adjusted all min/max
calls.
gdb/ChangeLog:
2016-09-16 Pedro Alves <palves@redhat.com>
* defs.h (min, max): Delete.
* aarch64-tdep.c: Include <algorithm> and use std::min and
std::max throughout.
* aarch64-tdep.c: Likewise.
* alpha-tdep.c: Likewise.
* amd64-tdep.c: Likewise.
* amd64-windows-tdep.c: Likewise.
* arm-tdep.c: Likewise.
* avr-tdep.c: Likewise.
* breakpoint.c: Likewise.
* btrace.c: Likewise.
* ctf.c: Likewise.
* disasm.c: Likewise.
* doublest.c: Likewise.
* dwarf2loc.c: Likewise.
* dwarf2read.c: Likewise.
* environ.c: Likewise.
* exec.c: Likewise.
* f-exp.y: Likewise.
* findcmd.c: Likewise.
* ft32-tdep.c: Likewise.
* gcore.c: Likewise.
* hppa-tdep.c: Likewise.
* i386-darwin-tdep.c: Likewise.
* i386-tdep.c: Likewise.
* linux-thread-db.c: Likewise.
* lm32-tdep.c: Likewise.
* m32r-tdep.c: Likewise.
* m88k-tdep.c: Likewise.
* memrange.c: Likewise.
* minidebug.c: Likewise.
* mips-tdep.c: Likewise.
* moxie-tdep.c: Likewise.
* nds32-tdep.c: Likewise.
* nios2-tdep.c: Likewise.
* nto-procfs.c: Likewise.
* parse.c: Likewise.
* ppc-sysv-tdep.c: Likewise.
* probe.c: Likewise.
* record-btrace.c: Likewise.
* remote.c: Likewise.
* rs6000-tdep.c: Likewise.
* rx-tdep.c: Likewise.
* s390-linux-nat.c: Likewise.
* s390-linux-tdep.c: Likewise.
* ser-tcp.c: Likewise.
* sh-tdep.c: Likewise.
* sh64-tdep.c: Likewise.
* source.c: Likewise.
* sparc-tdep.c: Likewise.
* symfile.c: Likewise.
* target-memory.c: Likewise.
* target.c: Likewise.
* tic6x-tdep.c: Likewise.
* tilegx-tdep.c: Likewise.
* tracefile-tfile.c: Likewise.
* tracepoint.c: Likewise.
* valprint.c: Likewise.
* value.c: Likewise.
* xtensa-tdep.c: Likewise.
* cli/cli-cmds.c: Likewise.
* compile/compile-object-load.c: Likewise.
|
|
|
Pedro Alves
|
e5ca03b41d |
Fix PR gdb/20295: GDB segfaults printing bitfield member of optimized out value
With something like:
struct A { int bitfield:4; } var;
If 'var' ends up wholly-optimized out, printing 'var.bitfield' crashes
gdb here:
(top-gdb) bt
#0 0x000000000058b89f in extract_unsigned_integer (addr=0x2 <error: Cannot access memory at address 0x2>, len=2, byte_order=BFD_ENDIAN_LITTLE)
at /home/pedro/gdb/mygit/src/gdb/findvar.c:109
#1 0x00000000005a187a in unpack_bits_as_long (field_type=0x16cff70, valaddr=0x0, bitpos=16, bitsize=12) at /home/pedro/gdb/mygit/src/gdb/value.c:3347
#2 0x00000000005a1b9d in unpack_value_bitfield (dest_val=0x1b5d9d0, bitpos=16, bitsize=12, valaddr=0x0, embedded_offset=0, val=0x1b5d8d0)
at /home/pedro/gdb/mygit/src/gdb/value.c:3441
#3 0x00000000005a2a5f in value_fetch_lazy (val=0x1b5d9d0) at /home/pedro/gdb/mygit/src/gdb/value.c:3958
#4 0x00000000005a10a7 in value_primitive_field (arg1=0x1b5d8d0, offset=0, fieldno=0, arg_type=0x16d04c0) at /home/pedro/gdb/mygit/src/gdb/value.c:3161
#5 0x00000000005b01e5 in do_search_struct_field (name=0x1727c60 "bitfield", arg1=0x1b5d8d0, offset=0, type=0x16d04c0, looking_for_baseclass=0, result_ptr=0x7fffffffcaf8,
[...]
unpack_value_bitfield is already optimized-out/unavailable -aware:
(...) VALADDR points to the contents of VAL. If the VAL's contents
required to extract the bitfield from are unavailable/optimized
out, DEST_VAL is correspondingly marked unavailable/optimized out.
however, it is not considering the case of the value having no
contents buffer at all, as can happen through
allocate_optimized_out_value.
gdb/ChangeLog:
2016-08-09 Pedro Alves <palves@redhat.com>
* value.c (unpack_value_bitfield): Skip unpacking if the parent
has no contents buffer to begin with.
gdb/testsuite/ChangeLog:
2016-08-09 Pedro Alves <palves@redhat.com>
* gdb.dwarf2/bitfield-parent-optimized-out.exp: New file.
|
|
David Taylor
|
6b8505468e |
Support structure offsets that are 512K or larger.
GDB computes structure byte offsets using a 32 bit integer. And, first it computes the offset in bits and then converts to bytes. The result is that any offset that if 512K bytes or larger overflows. This patch changes GDB to use LONGEST for such calculations. PR gdb/17520 Structure offset wrong when 1/4 GB or greater. * c-lang.h: Change all parameters, variables, and struct or union members used as struct or union fie3ld offsets from int to LONGEST. * c-valprint.c: Likewise. * cp-abi.c: Likewise. * cp-abi.h: Likewise. * cp-valprint.c: Likewise. * d-valprint.c: Likewise. * dwarf2loc.c: Likewise. * eval.c: Likewise. * extension-priv.h: Likewise. * extension.c: Likewise. * extension.h: Likewise. * findvar.c: Likewise. * gdbtypes.h: Likewise. * gnu-v2-abi.c: Likewise. * gnu-v3-abi.c: Likewise. * go-valprint.c: Likewise. * guile/guile-internal.h: Likewise. * guile/scm-pretty-print.c: Likewise. * jv-valprint.c Likewise. * opencl-lang.c: Likewise. * p-lang.h: Likewise. * python/py-prettyprint.c: Likewise. * python/python-internal.h: Likewise. * spu-tdep.c: Likewise. * typeprint.c: Likewise. * valarith.c: Likewise. * valops.c: Likewise. * valprint.c: Likewise. * valprint.h: Likewise. * value.c: Likewise. * value.h: Likewise. * p-valprint.c: Likewise. * c-typeprint.c (c_type_print_base): When printing offset, use plongest, not %d. * gdbtypes.c (recursive_dump_type): Ditto. |