This patch replaces the last usages of VEC(mem_range_s) with
std::vector<mem_range>. This allows getting rid of a few cleanups and
of the DEF_VEC_O(mem_range_s).
I added a test for normalize_mem_ranges to make sure I didn't break
anything there.
Regtested on the buildbot.
gdb/ChangeLog:
* memrange.h (struct mem_range): Define operator< and operator==.
(mem_range_s): Remove.
(DEF_VEC_O (mem_range_s)): Remove.
(normalize_mem_ranges): Change parameter type to std::vector.
* memrange.c (compare_mem_ranges): Remove.
(normalize_mem_ranges): Change parameter type to std::vector,
adjust to vector change.
* exec.c (section_table_available_memory): Return vector, remove
parameter.
(section_table_read_available_memory): Adjust to std::vector
change.
* remote.c (remote_read_bytes): Adjust to std::vector
change.
* tracepoint.h (traceframe_available_memory): Change parameter
type to std::vector.
* tracepoint.c (traceframe_available_memory): Change parameter
type to std::vector, adjust.
* gdb/mi/mi-main.c (mi_cmd_trace_frame_collected): Adjust to
std::vector change.
* gdb/Makefile.in (SUBDIR_UNITTESTS_SRCS): Add
unittests/memrange-selftests.c.
(SUBDIR_UNITTESTS_OBS): Add memrange-selftests.o.
* gdb/unittests/memrange-selftests.c: New file.
Straightforward change to get rid of a VEC. We need to new/delete
traceframe_info instead of malloc/free it. I found three places that
allocate a traceframe_info (ctf_traceframe_info, tfile_traceframe_info
and parse_traceframe_info) and only one that frees it
(free_traceframe_info).
gdb/ChangeLog:
* tracepoint.h (struct traceframe_info) <tvars>: Change type to
std::vector<int>.
* tracepoint.c (free_traceframe_info): Deallocate with delete.
(traceframe_info_start_tvar): Adjust to vector change.
(parse_traceframe_info): Allocate with new.
* ctf.c (ctf_traceframe_info): Allocate with new, adjust to
vector change.
* tracefile-tfile.c (build_traceframe_info): Adjust to vector
change.
tfile_traceframe_info): Allocate with new.
* mi/mi-main.c (mi_cmd_trace_frame_collected): Adjust to vector
change.
This patch gets rid of catch_exceptions / catch_exceptions_with_msg.
The latter is done mostly by getting rid of the three remaining
vestigial libgdb wrapper functions, which are really pointless
nowadays. This results in a good number of simplifications.
(I checked that Insight doesn't use those functions.)
The gdb.mi/mi-pthreads.exp change is necessary because this actually
fixes a bug, IMO -- the patch stops MI's -thread-select causing output
on the CLI stream.
I.e., before:
-thread-select 123456789
&"Thread ID 123456789 not known.\n"
^error,msg="Thread ID 123456789 not known."
(gdb)
After:
-thread-select 123456789
^error,msg="Thread ID 123456789 not known."
(gdb)
gdb/ChangeLog
2017-10-10 Pedro Alves <palves@redhat.com>
Tom Tromey <tom@tromey.com>
* breakpoint.c (struct captured_breakpoint_query_args)
(do_captured_breakpoint_query, gdb_breakpoint_query): Delete.
(print_breakpoint): New.
* breakpoint.h (print_breakpoint): Declare.
* common/common-exceptions.h (enum return_reason): Remove
references to catch_exceptions.
* exceptions.c (catch_exceptions, catch_exceptions_with_msg):
Delete.
* exceptions.h (catch_exceptions_ftype, catch_exceptions)
(catch_exception_ftype, catch_exceptions_with_msg): Delete.
* gdb.h: Delete.
* gdbthread.h (thread_select): Declare.
* mi/mi-cmd-break.c: Don't include gdb.h.
(breakpoint_notify): Use print_breakpoint.
* mi/mi-cmd-catch.c: Don't include gdb.h.
* mi/mi-interp.c: Don't include gdb.h.
(mi_print_breakpoint_for_event): New.
(mi_breakpoint_created, mi_breakpoint_modified): Use
mi_print_breakpoint_for_event.
* mi/mi-main.c: Don't include gdb.h.
(mi_cmd_thread_select): Parse the global thread ID here. Use
thread_select instead of gdb_thread_select.
(mi_cmd_thread_list_ids): Output "thread-ids" tuple here instead
of using gdb_list_thread_ids.
* remote-fileio.c (do_remote_fileio_request): Change type. Reply
FILEIO_ENOSYS here.
(remote_fileio_request): Use TRY/CATCH instead of
catch_exceptions.
* symfile-mem.c (struct symbol_file_add_from_memory_args)
(symbol_file_add_from_memory_wrapper): Delete.
(add_vsyscall_page): Use TRY/CATCH instead of catch_exceptions.
* thread.c: Don't include gdb.h.
(do_captured_list_thread_ids, gdb_list_thread_ids): Delete.
(thread_alive): Use thread_select.
(do_captured_thread_select): Delete, parts salvaged as ...
(thread_select): ... this new function.
(gdb_thread_select): Delete.
gdb/testsuite/ChangeLog
2017-10-10 Pedro Alves <palves@redhat.com>
* gdb.mi/mi-pthreads.exp (check_mi_thread_command_set): Don't
expect CLI output.
One spot in gdb uses a cleanup to free a splay tree. This patch
introduces a unique_ptr specialization for this case.
ChangeLog
2017-10-09 Tom Tromey <tom@tromey.com>
* mi/mi-main.c (free_splay_tree): Remove.
(list_available_thread_groups): Use splay_tree_up.
* common/gdb_splay_tree.h: New file.
The do_nothing function in mi-main.c is used as a splay tree
key-deleting function; but NULL serves the same purpose and is used
elsewhere in gdb. This patch removes the unneeded function.
ChangeLog
2017-10-09 Tom Tromey <tom@tromey.com>
* mi/mi-main.c (do_nothing): Remove.
(list_available_thread_groups): Update.
New in v3:
- Replace use_gdb_stub with can_spawn_for_attach.
- Call kill_wait_spawned_process on spawn_ids.
Commit
Use std::set in mi-main.c
52f9abe4c7
changed the logic of the "-list-thread-groups --available" by mistake
when a pid is passed. It prints all the processes except the one
specified by the given pid. The correct behavior is to only print the
process corresponding to that pid. this patch fixes that and adds a test.
gdb/ChangeLog:
* mi/mi-main.c (list_available_thread_groups): Reverse filter logic.
gdb/testsuite/ChangeLog:
* gdb.mi/list-thread-groups-available.exp: New file.
* gdb.mi/list-thread-groups-available.c: New file.
This changes read_memory_robust to return a std::vector, allowing the
removal of free_memory_read_result_vector and associated cleanups.
This patch also changes the functions it touches to be a bit more
robust with regards to deallocation; it's perhaps possible that
read_memory_robust could have leaked in some situations.
This patch is based on my earlier series to remove some MI cleanups.
Regression tested by the buildbot.
gdb/ChangeLog
2017-09-29 Tom Tromey <tom@tromey.com>
* target.c (read_whatever_is_readable): Change type of "result".
Update.
(free_memory_read_result_vector): Remove.
(read_memory_robust): Change return type. Update.
* mi/mi-main.c (mi_cmd_data_read_memory_bytes): Update. Use
bin2hex, std::string.
* target.h (memory_read_result_s): Remove typedef.
(free_memory_read_result_vector): Remove.
(read_memory_robust): Return std::vector.
Change captured_mi_execute_command to use a scoped_restore, removing a
cleanup. The old code copied the current token, but I don't believe
that is necessary.
gdb/ChangeLog
2017-09-29 Tom Tromey <tom@tromey.com>
* mi/mi-main.c (captured_mi_execute_command): Use scope_restore.
Change a couple of spots in mi-main.c to use std::set. This
simplifies the code and removes some cleanups.
gdb/ChangeLog
2017-09-29 Tom Tromey <tom@tromey.com>
* mi/mi-main.c (struct print_one_inferior_data) <inferiors>: Now a
'std::set *'.
(print_one_inferior): Update.
(free_vector_of_ints): Remove.
(list_available_thread_groups): Change "ids" to std::set.
(mi_cmd_list_thread_groups): Update.
(struct collect_cores_data) <core>: Now a std::set.
(collect_cores): Update.
(unique): Remove.
(print_one_inferior): Update.
Change a couple of spots in mi-main.c to use std::string, and change
one place to use field_fmt. This removes some cleanups.
gdb/ChangeLog
2017-09-29 Tom Tromey <tom@tromey.com>
* mi/mi-main.c (mi_execute_cli_command): Use std::string.
(mi_execute_async_cli_command): Likewise.
(mi_cmd_trace_frame_collected): Use field_fmt.
This changes mi_cmd_data_write_memory_bytes to use gdb::byte_vector,
removing some cleanups.
gdb/ChangeLog
2017-09-29 Tom Tromey <tom@tromey.com>
* mi/mi-main.c (mi_cmd_data_write_memory_bytes): Use
gdb::byte_vector.
Simply use a scoped_restore instead of manually saving and restoring
current_uiout.
gdb/ChangeLog:
* mi/mi-main.c (mi_load_progress): Restore current_uiout using a
scoped_restore.
This changes various spots to use ui_out_emit_list, removing some
cleanups.
ChangeLog
2017-09-09 Tom Tromey <tom@tromey.com>
* mi/mi-main.c (output_cores): Use ui_out_emit_list.
(list_available_thread_groups, mi_cmd_list_thread_groups)
(mi_cmd_data_list_changed_registers, mi_cmd_data_read_memory)
(mi_cmd_data_read_memory_bytes, mi_cmd_trace_frame_collected):
Likewise.
This changes more places to use ui_out_emit_tuple, removing cleanups.
ChangeLog
2017-09-09 Tom Tromey <tom@tromey.com>
* target.c (flash_erase_command): Use ui_out_emit_tuple.
* stack.c (print_frame): Use ui_out_emit_tuple.
* spu-tdep.c (info_spu_event_command): Use ui_out_emit_tuple.
(info_spu_mailbox_command, info_spu_dma_command)
(info_spu_proxydma_command): Likewise.
* mi/mi-main.c (mi_cmd_trace_frame_collected): Use
ui_out_emit_tuple, gdb::byte_vector, bin2hex.
* mi/mi-cmd-file.c (mi_cmd_file_list_shared_libraries): Use
ui_out_emit_tuple.
* breakpoint.c (print_it_watchpoint): Use ui_out_emit_tuple.
This replaces "struct symtabs_and_lines" with
std::vector<symtab_and_line> in most cases. This removes a number of
cleanups.
In some cases, the sals objects do not own the sals they point at.
Instead they point at some sal that lives on the stack. Typically
something like this:
struct symtab_and_line sal;
struct symtabs_and_lines sals;
// fill in sal
sals.nelts = 1;
sals.sals = &sal;
// use sals
Instead of switching those cases to std::vector too, such usages are
replaced by gdb::array_view<symtab_and_line> instead. This avoids
introducing heap allocations.
gdb/ChangeLog:
2017-09-04 Pedro Alves <palves@redhat.com>
* ax-gdb.c (agent_command_1): Use range-for.
* break-catch-throw.c (re_set_exception_catchpoint): Update.
* breakpoint.c: Include "common/array-view.h".
(init_breakpoint_sal, create_breakpoint_sal): Change sals
parameter from struct symtabs_and_lines to
array_view<symtab_and_line>. Adjust. Use range-for. Update.
(breakpoint_sals_to_pc): Change sals parameter from struct
symtabs_and_lines to std::vector reference.
(check_fast_tracepoint_sals): Change sals parameter from struct
symtabs_and_lines to std::array_view. Use range-for.
(decode_static_tracepoint_spec): Return a std::vector instead of
symtabs_and_lines. Update.
(create_breakpoint): Update.
(break_range_command, until_break_command, clear_command): Update.
(base_breakpoint_decode_location, bkpt_decode_location)
(bkpt_probe_create_sals_from_location)
(bkpt_probe_decode_location, tracepoint_decode_location)
(tracepoint_probe_decode_location)
(strace_marker_create_sals_from_location): Return a std::vector
instead of symtabs_and_lines.
(strace_marker_create_breakpoints_sal): Update.
(strace_marker_decode_location): Return a std::vector instead of
symtabs_and_lines. Update.
(update_breakpoint_locations): Change struct symtabs_and_lines
parameters to gdb::array_view. Adjust.
(location_to_sals): Return a std::vector instead of
symtabs_and_lines. Update.
(breakpoint_re_set_default): Use std::vector instead of struct
symtabs_and_lines.
(decode_location_default): Return a std::vector instead of
symtabs_and_lines. Update.
* breakpoint.h: Include "common/array-view.h".
(struct breakpoint_ops) <decode_location>: Now returns a
std::vector instead of returning a symtabs_and_lines via output
parameter.
(update_breakpoint_locations): Change sals parameters to use
gdb::array_view.
* cli/cli-cmds.c (edit_command, list_command): Update to use
std::vector and gdb::array_view.
(ambiguous_line_spec): Adjust to use gdb::array_view and
range-for.
(compare_symtabs): Rename to ...
(cmp_symtabs): ... this. Change parameters to symtab_and_line
const reference and adjust.
(filter_sals): Rewrite using std::vector and standard algorithms.
* elfread.c (elf_gnu_ifunc_resolver_return_stop): Simplify.
(jump_command): Update to use std::vector.
* linespec.c (struct linespec_state) <canonical_names>: Update
comment.
(add_sal_to_sals_basic): Delete.
(add_sal_to_sals, filter_results, convert_results_to_lsals)
(decode_line_2, create_sals_line_offset)
(convert_address_location_to_sals, convert_linespec_to_sals)
(convert_explicit_location_to_sals, parse_linespec)
(event_location_to_sals, decode_line_full, decode_line_1)
(decode_line_with_current_source)
(decode_line_with_last_displayed, decode_objc)
(decode_digits_list_mode, decode_digits_ordinary, minsym_found)
(linespec_result::~linespec_result): Adjust to use std::vector
instead of symtabs_and_lines.
* linespec.h (linespec_sals::sals): Now a std::vector.
(struct linespec_result): Use std::vector, bool, and in-class
initialization.
(decode_line_1, decode_line_with_current_source)
(decode_line_with_last_displayed): Return std::vector.
* macrocmd.c (info_macros_command): Use std::vector.
* mi/mi-main.c (mi_cmd_trace_find): Use std::vector.
* probe.c (parse_probes_in_pspace, parse_probes): Adjust to use
std::vector.
* probe.h (parse_probes): Return a std::vector.
* python/python.c (gdbpy_decode_line): Use std::vector and
gdb::array_view.
* source.c (select_source_symtab, line_info): Use std::vector.
* stack.c (func_command): Use std::vector.
* symtab.h (struct symtabs_and_lines): Delete.
* tracepoint.c (tfind_line_command, scope_info): Use std::vector.
This patch introduces the use of various containers -- std::vector,
std::string, or gdb::byte_vector -- in several spots in gdb that were
using xmalloc and a cleanup.
ChangeLog
2017-08-03 Tom Tromey <tom@tromey.com>
* valops.c (search_struct_method): Use gdb::byte_vector.
* valarith.c (value_concat): Use std::vector.
* target.c (memory_xfer_partial): Use gdb::byte_vector.
(simple_search_memory): Likewise.
* printcmd.c (find_string_backward): Use gdb::byte_vector.
* mi/mi-main.c (mi_cmd_data_write_memory): Use gdb::byte_vector.
* gcore.c (gcore_copy_callback): Use gdb::byte_vector.
* elfread.c (elf_rel_plt_read): Use std::string.
* cp-valprint.c (cp_print_value): Use gdb::byte_vector.
* cli/cli-dump.c (restore_section_callback): Use
gdb::byte_vector.
This patch replaces make_cleanup_restore_current_language with an RAII
class that saves the current language, and restores it when the object
is destroyed.
ChangeLog
2017-08-03 Tom Tromey <tom@tromey.com>
* utils.h (make_cleanup_restore_current_language): Remove.
* utils.c (do_restore_current_language)
(make_cleanup_restore_current_language): Remove.
* parse.c (parse_exp_in_context_1)
(parse_expression_with_language): Use
scoped_restore_current_language.
* mi/mi-main.c (mi_cmd_execute): Use
scoped_restore_current_language.
* language.h (scoped_restore_current_language): New class.
In some cases we've been replacing heap-allocated gdb_byte buffers
managed with xmalloc/make_cleanup(xfree) with gdb::vector<gdb_byte>.
That usually pessimizes the code a little bit because std::vector
value-initializes elements (which for gdb_byte means
zero-initialization), while if you're creating a temporary buffer,
you're most certaintly going to fill it in with some data. An
alternative is to use
unique_ptr<gdb_byte[]> buf (new gdb_byte[size]);
but it looks like that's not very popular.
Recently, a use of obstacks in dwarf2read.c was replaced with
std::vector<gdb_byte> and that as well introduced a pessimization for
always memsetting the buffer when it's garanteed that the zeros will
be overwritten immediately. (see dwarf2read.c change in this patch to
find it.)
So here's a different take at addressing this issue "by design":
#1 - Introduce default_init_allocator<T>
I.e., a custom allocator that does default construction using default
initialization, meaning, no more zero initialization. That's the
default_init_allocation<T> class added in this patch.
See "Notes" at
<http://en.cppreference.com/w/cpp/container/vector/resize>.
#2 - Introduce def_vector<T>
I.e., a convenience typedef, because typing the allocator is annoying:
using def_vector<T> = std::vector<T, gdb::default_init_allocator<T>>;
#3 - Introduce byte_vector
Because gdb_byte vectors will be the common thing, add a convenience
"byte_vector" typedef:
using byte_vector = def_vector<gdb_byte>;
which is really the same as:
std::vector<gdb_byte, gdb::default_init_allocator<gdb_byte>>;
The intent then is to make "gdb::byte_vector" be the go-to for dynamic
byte buffers. So the less friction, the better.
#4 - Adjust current code to use it.
To set the example going forward. Replace std::vector uses and also
unique_ptr<byte[]> uses.
One nice thing is that with this allocator, for changes like these:
-std::unique_ptr<byte[]> buf (new gdb_byte[some_size]);
+gdb::byte_vector buf (some_size);
fill_with_data (buf.data (), buf.size ());
the generated code is the same as before. I.e., the compiler
de-structures the vector and gets rid of the unused "reserved vs size"
related fields.
The other nice thing is that it's easier to write
gdb::byte_vector buf (size);
than
std::unique_ptr<gdb_byte[]> buf (new gdb_byte[size]);
or even (C++14):
auto buf = std::make_unique<gdb_byte[]> (size); // zero-initializes...
#5 - Suggest s/std::vector<gdb_byte>/gdb::byte_vector/ going forward.
Note that this commit actually fixes a couple of bugs where the current
code is incorrectly using "std::vector::reserve(new_size)" and then
accessing the vector's internal buffer beyond the vector's size: see
dwarf2loc.c and charset.c. That's undefined behavior and may trigger
debug mode assertion failures. With default_init_allocator,
"resize()" behaves like "reserve()" performance wise, in that it
leaves new elements with unspecified values, but, it does that safely
without triggering undefined behavior when you access those values.
gdb/ChangeLog:
2017-06-14 Pedro Alves <palves@redhat.com>
* ada-lang.c: Include "common/byte-vector.h".
(ada_value_primitive_packed_val): Use gdb::byte_vector.
* charset.c (wchar_iterator::iterate): Resize the vector instead
of reserving it.
* common/byte-vector.h: Include "common/def-vector.h".
(wchar_iterator::m_out): Now a gdb::def_vector<gdb_wchar_t>.
* cli/cli-dump.c: Include "common/byte-vector.h".
(dump_memory_to_file, restore_binary_file): Use gdb::byte_vector.
* common/byte-vector.h: New file.
* common/def-vector.h: New file.
* common/default-init-alloc.h: New file.
* dwarf2loc.c: Include "common/byte-vector.h".
(rw_pieced_value): Use gdb::byte_vector, and resize the vector
instead of reserving it.
* dwarf2read.c: Include "common/byte-vector.h".
(data_buf::m_vec): Now a gdb::byte_vector.
* gdb_regex.c: Include "common/def-vector.h".
(compiled_regex::compiled_regex): Use gdb::def_vector<char>.
* mi/mi-main.c: Include "common/byte-vector.h".
(mi_cmd_data_read_memory): Use gdb::byte_vector.
* printcmd.c: Include "common/byte-vector.h".
(print_scalar_formatted): Use gdb::byte_vector.
* valprint.c: Include "common/byte-vector.h".
(maybe_negate_by_bytes, print_decimal_chars): Use
gdb::byte_vector.
After all the make_cleanup_restore_current_thread fixing, I thought
I'd convert that and its relatives (which are all cleanups) to RAII
classes.
scoped_restore_current_pspace_and_thread was put in a separate file to
avoid a circular dependency.
Tested on x86-64 Fedora 23, native and gdbserver.
gdb/ChangeLog:
2017-05-04 Pedro Alves <palves@redhat.com>
* Makefile.in (SFILES): Add progspace-and-thread.c.
(HFILES_NO_SRCDIR): Add progspace-and-thread.h.
(COMMON_OBS): Add progspace-and-thread.o.
* breakpoint.c: Include "progspace-and-thread.h".
(update_inserted_breakpoint_locations)
(insert_breakpoint_locations, create_longjmp_master_breakpoint):
Use scoped_restore_current_pspace_and_thread.
(create_std_terminate_master_breakpoint): Use
scoped_restore_current_program_space.
(remove_breakpoint): Use scoped_restore_current_pspace_and_thread.
(print_breakpoint_location): Use
scoped_restore_current_program_space.
(bp_loc_is_permanent): Use
scoped_restore_current_pspace_and_thread.
(resolve_sal_pc): Use scoped_restore_current_pspace_and_thread.
(download_tracepoint_locations): Use
scoped_restore_current_pspace_and_thread.
(breakpoint_re_set): Use scoped_restore_current_pspace_and_thread.
* exec.c (exec_close_1): Use scoped_restore_current_program_space.
(enum step_over_calls_kind): Moved from inferior.h.
(class scoped_restore_current_thread): New class.
* gdbthread.h (make_cleanup_restore_current_thread): Delete
declaration.
(scoped_restore_current_thread): New class.
* infcmd.c: Include "common/gdb_optional.h".
(continue_1, proceed_after_attach): Use
scoped_restore_current_thread.
(notice_new_inferior): Use scoped_restore_current_thread.
* inferior.c: Include "progspace-and-thread.h".
(restore_inferior, save_current_inferior): Delete.
(add_inferior_command, clone_inferior_command): Use
scoped_restore_current_pspace_and_thread.
* inferior.h (scoped_restore_current_inferior): New class.
* infrun.c: Include "progspace-and-thread.h" and
"common/gdb_optional.h".
(follow_fork_inferior): Use
scoped_restore_current_pspace_and_thread.
(scoped_restore_exited_inferior): New class.
(handle_vfork_child_exec_or_exit): Use
scoped_restore_exited_inferior,
scoped_restore_current_pspace_and_thread,
scoped_restore_current_thread and scoped_restore.
(fetch_inferior_event): Use scoped_restore_current_thread.
* linespec.c (decode_line_full, decode_line_1): Use
scoped_restore_current_program_space.
* mi/mi-main.c: Include "progspace-and-thread.h".
(exec_continue): Use scoped_restore_current_thread.
(mi_cmd_exec_run): Use scoped_restore_current_pspace_and_thread.
(mi_cmd_trace_frame_collected): Use scoped_restore_current_thread.
* proc-service.c (ps_pglobal_lookup): Use
scoped_restore_current_program_space.
* progspace-and-thread.c: New file.
* progspace-and-thread.h: New file.
* progspace.c (release_program_space, clone_program_space): Use
scoped_restore_current_program_space.
(restore_program_space, save_current_program_space)
(save_current_space_and_thread): Delete.
(switch_to_program_space_and_thread): Moved to
progspace-and-thread.c.
* progspace.h (save_current_program_space)
(save_current_space_and_thread): Delete declarations.
(scoped_restore_current_program_space): New class.
* remote.c (remote_btrace_maybe_reopen): Use
scoped_restore_current_thread.
* symtab.c: Include "progspace-and-thread.h".
(skip_prologue_sal): Use scoped_restore_current_pspace_and_thread.
* thread.c (print_thread_info_1): Use
scoped_restore_current_thread.
(struct current_thread_cleanup): Delete.
(do_restore_current_thread_cleanup)
(restore_current_thread_cleanup_dtor): Rename/convert both to ...
(scoped_restore_current_thread::~scoped_restore_current_thread):
... this new dtor.
(make_cleanup_restore_current_thread): Rename/convert to ...
(scoped_restore_current_thread::scoped_restore_current_thread):
... this new ctor.
(thread_apply_all_command): Use scoped_restore_current_thread.
(thread_apply_command): Use scoped_restore_current_thread.
* tracepoint.c (tdump_command): Use scoped_restore_current_thread.
* varobj.c (value_of_root_1): Use scoped_restore_current_thread.
This changes some spots to use ui_out_emit_list. This only touches
"easy" cases, where the cleanup was used in a block-structured way.
There's also one more use of ui_out_emit_tuple in here.
ChangeLog
2017-04-22 Tom Tromey <tom@tromey.com>
* mi/mi-cmd-file.c (mi_cmd_file_list_shared_libraries): Use
ui_out_emit_list.
* stack.c (print_frame): Use ui_out_emit_list.
* mi/mi-symbol-cmds.c (mi_cmd_symbol_list_lines): Use
ui_out_emit_list.
* mi/mi-main.c (print_one_inferior)
(mi_cmd_data_list_register_names)
(mi_cmd_data_list_register_values, mi_cmd_list_features)
(mi_cmd_list_target_features, mi_cmd_trace_frame_collected): Use
ui_out_emit_list.
* mi/mi-interp.c (mi_on_normal_stop_1): Use ui_out_emit_list.
(mi_output_solib_attribs): Use ui_out_emit_list,
ui_out_emit_tuple.
* mi/mi-cmd-var.c (varobj_update_one): Use ui_out_emit_list.
* mi/mi-cmd-stack.c (mi_cmd_stack_list_frames)
(mi_cmd_stack_list_args, list_args_or_locals): Use
ui_out_emit_list.
* disasm.c (do_assembly_only): Use ui_out_emit_list.
* breakpoint.c (print_solib_event, output_thread_groups): Use
ui_out_emit_list.
This patch changes a few more spots in MI to use ui_out_emit_tuple.
These changes required the use of gdb::optional.
ChangeLog
2017-04-22 Tom Tromey <tom@tromey.com>
* mi/mi-main.c (print_variable_or_computed): Use ui_out_emit_tuple.
* mi/mi-cmd-var.c (varobj_update_one): Use ui_out_emit_tuple.
* mi/mi-cmd-stack.c (list_arg_or_local): Use ui_out_emit_tuple.
This patch changes various places to use ui_out_emit_tuple,
eliminating a number of cleanups. This patch only tackles "easy"
cases, which are ones where the cleanups in question were
block-structured and did not involve any changes other than the
obvious replacement.
ChangeLog
2017-04-22 Tom Tromey <tom@tromey.com>
* record-btrace.c (record_btrace_insn_history)
(record_btrace_insn_history_range, record_btrace_call_history)
(record_btrace_call_history_range): Use ui_out_emit_tuple.
* thread.c (do_captured_list_thread_ids, print_thread_info_1): Use
ui_out_emit_tuple.
* stack.c (print_frame_info): Use ui_out_emit_tuple.
* solib.c (info_sharedlibrary_command): Use ui_out_emit_tuple.
* skip.c (skip_info): Use ui_out_emit_tuple.
* remote.c (show_remote_cmd): Use ui_out_emit_tuple.
* progspace.c (print_program_space): Use ui_out_emit_tuple.
* probe.c (info_probes_for_ops): Use ui_out_emit_tuple.
* osdata.c (info_osdata): Use ui_out_emit_tuple.
* mi/mi-symbol-cmds.c (mi_cmd_symbol_list_lines): Use
ui_out_emit_tuple.
* mi/mi-main.c (print_one_inferior, list_available_thread_groups)
(output_register, mi_cmd_data_read_memory)
(mi_cmd_data_read_memory_bytes, mi_load_progress)
(mi_cmd_trace_frame_collected): Use ui_out_emit_tuple.
* mi/mi-cmd-var.c (mi_cmd_var_list_children, varobj_update_one):
Use ui_out_emit_tuple.
* mi/mi-cmd-stack.c (mi_cmd_stack_list_args): Use
ui_out_emit_tuple.
* mi/mi-cmd-info.c (mi_cmd_info_ada_exceptions)
(mi_cmd_info_gdb_mi_command): Use ui_out_emit_tuple.
* linux-thread-db.c (info_auto_load_libthread_db): Use
ui_out_emit_tuple.
* inferior.c (print_inferior): Use ui_out_emit_tuple.
* gdb_bfd.c (print_one_bfd): Use ui_out_emit_tuple.
* disasm.c (do_mixed_source_and_assembly_deprecated)
(do_mixed_source_and_assembly): Use ui_out_emit_tuple.
* cp-abi.c (list_cp_abis): Use ui_out_emit_tuple.
* cli/cli-setshow.c (cmd_show_list): Use ui_out_emit_tuple.
* breakpoint.c (print_one_breakpoint_location)
(print_one_breakpoint): Use ui_out_emit_tuple.
* auto-load.c (print_script, info_auto_load_cmd): Use
ui_out_emit_tuple.
* ada-tasks.c (print_ada_task_info): Use ui_out_emit_tuple.
This changes a few more places to use scoped_restore, allowing some
cleanup removals.
gdb/ChangeLog
2017-04-12 Tom Tromey <tom@tromey.com>
* mi/mi-main.c (exec_direction_forward): Remove.
(exec_reverse_continue, mi_execute_command): Use scoped_restore.
* guile/scm-ports.c (ioscm_with_output_to_port_worker): Use
scoped_restore.
* guile/guile.c (guile_repl_command, guile_command)
(gdbscm_execute_gdb_command): Use scoped_restore.
* go-exp.y (go_parse): Use scoped_restore.
* d-exp.y (d_parse): Use scoped_restore.
* cli/cli-decode.c (cmd_func): Use scoped_restore.
* c-exp.y (c_parse): Use scoped_restore.
This changes mi_parse to return a unique_ptr, and to use "new"; then
fixes up the users. This allows removing one cleanup.
gdb/ChangeLog
2017-04-12 Tom Tromey <tom@tromey.com>
* mi/mi-parse.h (struct mi_parse): Add constructor, destructor.
(mi_parse): Update return type.
(mi_parse_free): Remove.
* mi/mi-parse.c (mi_parse::mi_parse): New constructor.
(mi_parse::~mi_parse): Rename from mi_parse_free.
(mi_parse_cleanup): Remove.
(mi_parse): Return a unique_ptr. Use new.
* mi/mi-main.c (mi_execute_command): Update.
- The interp->data field disappears, since we can put data in the
interpreter directly now. The "init" method remains in place, but
it now returns void.
- A few places check if the interpreter method is NULL before calling
it, and also check whether the method returns true/false. For some
of those methods, all current implementations always return true.
In those cases, this commit makes the C++-fied method return void
instead and cleans up the callers.
Tested on x86_64 Fedora 23.
gdb/ChangeLog:
2017-02-03 Pedro Alves <palves@redhat.com>
* cli/cli-interp.c (cli_interp_base::cli_interp_base)
(cli_interp_base::~cli_interp_base): New.
(cli_interp): New struct.
(as_cli_interp): Cast the interp itself to cli_interp.
(cli_interpreter_pre_command_loop): Rename to ...
(cli_interp_base::pre_command_loop): ... this. Remove 'self'
parameter.
(cli_interpreter_init): Rename to ...
(cli_interp::init): ... this. Remove 'self' parameter. Use
boolean. Make extern.
(cli_interpreter_resume): Rename to ...
(cli_interp::resume): ... this. Remove 'data' parameter. Make
extern.
(cli_interpreter_suspend): Rename to ...
(cli_interp::suspend): ... this. Remove 'data' parameter. Make
extern.
(cli_interpreter_exec): Rename to ...
(cli_interp::exec): ... this. Remove 'data' parameter. Make
extern.
(cli_interpreter_supports_command_editing): Rename to ...
(cli_interp_base::supports_command_editing): ... this. Remove
'interp' parameter. Make extern.
(cli_ui_out): Rename to ...
(cli_interp::interp_ui_out): ... this. Remove 'interp' parameter.
Make extern.
(cli_set_logging): Rename to ...
(cli_interp_base::set_logging): ... this. Remove 'interp'
parameter. Make extern.
(cli_interp_procs): Delete.
(cli_interp_factory): Adjust to use "new".
* cli/cli-interp.h: Include "interps.h".
(struct cli_interp_base): New struct.
* interps.c (struct interp): Delete. Fields moved to interps.h.
(interp_new): Delete.
(interp::interp, interp::~interp): New.
(interp_set): Use bool, and return void. Assume the interpreter
has suspend, init and resume methods, and that the all return
void.
(set_top_level_interpreter): interp_set returns void.
(interp_ui_out): Adapt.
(current_interp_set_logging): Adapt.
(interp_data): Delete.
(interp_pre_command_loop, interp_supports_command_editing): Adapt.
(interp_exec): Adapt.
(top_level_interpreter_data): Delete.
* interps.h (interp_init_ftype, interp_resume_ftype)
(interp_suspend_ftype, interp_exec_ftype)
(interp_pre_command_loop_ftype, interp_ui_out_ftype): Delete.
(class interp): New.
(interp_new): Delete.
(interp_set): Now returns void. Use bool.
(interp_data, top_level_interpreter_data): Delete.
* mi/mi-common.h: Include interps.h.
(class mi_interp): Inherit from interp. Define a ctor. Declare
init, resume, suspect, exec, interp_ui_out, set_logging and
pre_command_loop methods.
* mi/mi-interp.c (as_mi_interp): Cast the interp itself.
(mi_interpreter_init): Rename to ...
(mi_interp::init): ... this. Remove the 'interp' parameter, use
bool, return void and make extern. Adjust.
(mi_interpreter_resume): ... Rename to ...
(mi_interp::resume): ... this. Remove the 'data' parameter,
return void and make extern. Adjust.
(mi_interpreter_suspend): ... Rename to ...
(mi_interp::suspend): ... this. Remove the 'data' parameter,
return void and make extern. Adjust.
(mi_interpreter_exec): ... Rename to ...
(mi_interp::exec): ... this. Remove the 'data' parameter and make
extern. Adjust.
(mi_interpreter_pre_command_loop): ... Rename to ...
(mi_interp::pre_command_loop): ... this. Remove the 'self'
parameter and make extern.
(mi_on_normal_stop_1): Adjust.
(mi_ui_out): Rename to ...
(mi_interp::interp_ui_out): ... this. Remove the 'interp'
parameter and make extern. Adjust.
(mi_set_logging): Rename to ...
(mi_interp::set_logging): ... this. Remove the 'interp'
parameter and make extern. Adjust.
(mi_interp_procs): Delete.
(mi_interp_factory): Adjust to use 'new'.
* mi/mi-main.c (mi_cmd_gdb_exit, captured_mi_execute_command)
(mi_print_exception, mi_execute_command, mi_load_progress):
Adjust.
* tui/tui-interp.c (tui_interp): New class.
(as_tui_interp): Return a tui_interp pointer.
(tui_on_normal_stop, tui_on_signal_received)
(tui_on_end_stepping_range, tui_on_signal_exited, tui_on_exited)
(tui_on_no_history, tui_on_user_selected_context_changed): Adjust
to use interp::interp_ui_out.
(tui_init): Rename to ...
(tui_interp::init): ... this. Remove the 'self' parameter, use
bool, return void and make extern. Adjust.
(tui_resume): Rename to ...
(tui_interp::resume): ... this. Remove the 'data' parameter,
return void and make extern. Adjust.
(tui_suspend): Rename to ...
(tui_interp::suspend): ... this. Remove the 'data' parameter,
return void and make extern. Adjust.
(tui_ui_out): Rename to ...
(tui_interp::interp_ui_out): ... this. Remove the 'self'
parameter, and make extern. Adjust.
(tui_exec): Rename to ...
(tui_interp::exec): ... this. Remove the 'data' parameter and
make extern.
(tui_interp_procs): Delete.
(tui_interp_factory): Use "new".
This patch starts from the desire to eliminate
make_cleanup_ui_file_delete, but then goes beyond. It makes ui_file &
friends a real C++ class hierarchy, and switches temporary
ui_file-like objects to stack-based allocation.
- mem_fileopen -> string_file
mem_fileopen is replaced with a new string_file class that is treated
as a value class created on the stack. This alone eliminates most
make_cleanup_ui_file_delete calls, and, simplifies code a whole lot
(diffstat shows around 1k loc dropped.)
string_file's internal buffer is a std::string, thus the "string" in
the name. This simplifies the implementation much, compared to
mem_fileopen, which managed growing its internal buffer manually.
- ui_file_as_string, ui_file_strdup, ui_file_obsavestring all gone
The new string_file class has a string() method that provides direct
writable access to the internal std::string buffer. This replaced
ui_file_as_string, which forced a copy of the same data the stream had
inside. With direct access via a writable reference, we can instead
move the string out of the string_stream, avoiding deep string
copying.
Related, ui_file_xstrdup calls are replaced with xstrdup'ping the
stream's string, and ui_file_obsavestring is replaced by
obstack_copy0.
With all those out of the way, getting rid of the weird ui_file_put
mechanism was possible.
- New ui_file::printf, ui_file::puts, etc. methods
These simplify / clarify client code. I considered splitting
client-code changes, like these, e.g.:
- stb = mem_fileopen ();
- fprintf_unfiltered (stb, "%s%s%s",
- _("The valid values are:\n"),
- regdesc,
- _("The default is \"std\"."));
+ string_file stb;
+ stb.printf ("%s%s%s",
+ _("The valid values are:\n"),
+ regdesc,
+ _("The default is \"std\"."));
In two steps, with the first step leaving fprintf_unfiltered (etc.)
calls in place, and only afterwards do a pass to change all those to
call stb.printf etc.. I didn't do that split, because (when I tried),
it turned out to be pointless make-work: the first pass would have to
touch the fprintf_unfiltered line anyway, to replace "stb" with
"&stb".
- gdb_fopen replaced with stack-based objects
This avoids the need for cleanups or unique_ptr's. I.e., this:
struct ui_file *file = gdb_fopen (filename, "w");
if (filename == NULL)
perror_with_name (filename);
cleanups = make_cleanup_ui_file_delete (file);
// use file.
do_cleanups (cleanups);
is replaced with this:
stdio_file file;
if (!file.open (filename, "w"))
perror_with_name (filename);
// use file.
- odd contorsions in null_file_write / null_file_fputs around when to
call to_fputs / to_write eliminated.
- Global null_stream object
A few places that were allocating a ui_file in order to print to
"nowhere" are adjusted to instead refer to a new 'null_stream' global
stream.
- TUI's tui_sfileopen eliminated. TUI's ui_file much simplified
The TUI's ui_file was serving a dual purpose. It supported being used
as string buffer, and supported being backed by a stdio FILE. The
string buffer part is gone, replaced by using of string_file. The
'FILE *' support is now much simplified, by making the TUI's ui_file
inherit from stdio_file.
gdb/ChangeLog:
2017-02-02 Pedro Alves <palves@redhat.com>
* ada-lang.c (type_as_string): Use string_file.
* ada-valprint.c (ada_print_floating): Use string_file.
* ada-varobj.c (ada_varobj_scalar_image)
(ada_varobj_get_value_image): Use string_file.
* aix-thread.c (aix_thread_extra_thread_info): Use string_file.
* arm-tdep.c (_initialize_arm_tdep): Use string_printf.
* breakpoint.c (update_inserted_breakpoint_locations)
(insert_breakpoint_locations, reattach_breakpoints)
(print_breakpoint_location, print_one_detail_ranged_breakpoint)
(print_it_watchpoint): Use string_file.
(save_breakpoints): Use stdio_file.
* c-exp.y (oper): Use string_file.
* cli/cli-logging.c (set_logging_redirect): Use ui_file_up and
tee_file.
(pop_output_files): Use delete.
(handle_redirections): Use stdio_file and tee_file.
* cli/cli-setshow.c (do_show_command): Use string_file.
* compile/compile-c-support.c (c_compute_program): Use
string_file.
* compile/compile-c-symbols.c (generate_vla_size): Take a
'string_file &' instead of a 'ui_file *'.
(generate_c_for_for_one_variable): Take a 'string_file &' instead
of a 'ui_file *'. Use string_file.
(generate_c_for_variable_locations): Take a 'string_file &'
instead of a 'ui_file *'.
* compile/compile-internal.h (generate_c_for_for_one_variable):
Take a 'string_file &' instead of a 'ui_file *'.
* compile/compile-loc2c.c (push, pushf, unary, binary)
(print_label, pushf_register_address, pushf_register)
(do_compile_dwarf_expr_to_c): Take a 'string_file &' instead of a
'ui_file *'. Adjust.
* compile/compile.c (compile_to_object): Use string_file.
* compile/compile.h (compile_dwarf_expr_to_c)
(compile_dwarf_bounds_to_c): Take a 'string_file &' instead of a
'ui_file *'.
* cp-support.c (inspect_type): Use string_file and obstack_copy0.
(replace_typedefs_qualified_name): Use string_file and
obstack_copy0.
* disasm.c (gdb_pretty_print_insn): Use string_file.
(gdb_disassembly): Adjust reference the null_stream global.
(do_ui_file_delete): Delete.
(gdb_insn_length): Use null_stream.
* dummy-frame.c (maintenance_print_dummy_frames): Use stdio_file.
* dwarf2loc.c (dwarf2_compile_property_to_c)
(locexpr_generate_c_location, loclist_generate_c_location): Take a
'string_file &' instead of a 'ui_file *'.
* dwarf2loc.h (dwarf2_compile_property_to_c): Likewise.
* dwarf2read.c (do_ui_file_peek_last): Delete.
(dwarf2_compute_name): Use string_file.
* event-top.c (gdb_setup_readline): Use stdio_file.
* gdbarch.sh (verify_gdbarch): Use string_file.
* gdbtypes.c (safe_parse_type): Use null_stream.
* guile/scm-breakpoint.c (gdbscm_breakpoint_commands): Use
string_file.
* guile/scm-disasm.c (gdbscm_print_insn_from_port): Take a
'string_file *' instead of a 'ui_file *'.
(gdbscm_arch_disassemble): Use string_file.
* guile/scm-frame.c (frscm_print_frame_smob): Use string_file.
* guile/scm-ports.c (class ioscm_file_port): Now a class that
inherits from ui_file.
(ioscm_file_port_delete, ioscm_file_port_rewind)
(ioscm_file_port_put): Delete.
(ioscm_file_port_write): Rename to ...
(ioscm_file_port::write): ... this. Remove file_port_magic
checks.
(ioscm_file_port_new): Delete.
(ioscm_with_output_to_port_worker): Use ioscm_file_port and
ui_file_up.
* guile/scm-type.c (tyscm_type_name): Use string_file.
* guile/scm-value.c (vlscm_print_value_smob, gdbscm_value_print):
Use string_file.
* infcmd.c (print_return_value_1): Use string_file.
* infrun.c (print_target_wait_results): Use string_file.
* language.c (add_language): Use string_file.
* location.c (explicit_to_string_internal): Use string_file.
* main.c (captured_main_1): Use null_file.
* maint.c (maintenance_print_architecture): Use stdio_file.
* mi/mi-cmd-stack.c (list_arg_or_local): Use string_file.
* mi/mi-common.h (struct mi_interp) <out, err, log, targ,
event_channel>: Change type to mi_console_file pointer.
* mi/mi-console.c (mi_console_file_fputs, mi_console_file_flush)
(mi_console_file_delete): Delete.
(struct mi_console_file): Delete.
(mi_console_file_magic): Delete.
(mi_console_file_new): Delete.
(mi_console_file::mi_console_file): New.
(mi_console_file_delete): Delete.
(mi_console_file_fputs): Delete.
(mi_console_file::write): New.
(mi_console_raw_packet): Delete.
(mi_console_file::flush): New.
(mi_console_file_flush): Delete.
(mi_console_set_raw): Rename to ...
(mi_console_file::set_raw): ... this.
* mi/mi-console.h (class mi_console_file): New class.
(mi_console_file_new, mi_console_set_raw): Delete.
* mi/mi-interp.c (mi_interpreter_init): Use mi_console_file.
(mi_set_logging): Use delete and tee_file. Adjust.
* mi/mi-main.c (output_register): Use string_file.
(mi_cmd_data_evaluate_expression): Use string_file.
(mi_cmd_data_read_memory): Use string_file.
(mi_cmd_execute, print_variable_or_computed): Use string_file.
* mi/mi-out.c (mi_ui_out::main_stream): New.
(mi_ui_out::rewind): Use main_stream and
string_file.
(mi_ui_out::put): Use main_stream and string_file.
(mi_ui_out::mi_ui_out): Remove 'stream' parameter.
Allocate a 'string_file' instead.
(mi_out_new): Don't allocate a mem_fileopen stream here.
* mi/mi-out.h (mi_ui_out::mi_ui_out): Remove 'stream' parameter.
(mi_ui_out::main_stream): Declare method.
* printcmd.c (eval_command): Use string_file.
* psymtab.c (maintenance_print_psymbols): Use stdio_file.
* python/py-arch.c (archpy_disassemble): Use string_file.
* python/py-breakpoint.c (bppy_get_commands): Use string_file.
* python/py-frame.c (frapy_str): Use string_file.
* python/py-framefilter.c (py_print_type, py_print_single_arg):
Use string_file.
* python/py-type.c (typy_str): Use string_file.
* python/py-unwind.c (unwind_infopy_str): Use string_file.
* python/py-value.c (valpy_str): Use string_file.
* record-btrace.c (btrace_insn_history): Use string_file.
* regcache.c (regcache_print): Use stdio_file.
* reggroups.c (maintenance_print_reggroups): Use stdio_file.
* remote.c (escape_buffer): Use string_file.
* rust-lang.c (rust_get_disr_info): Use string_file.
* serial.c (serial_open_ops_1): Use stdio_file.
(do_serial_close): Use delete.
* stack.c (print_frame_arg): Use string_file.
(print_frame_args): Remove local mem_fileopen stream, not used.
(print_frame): Use string_file.
* symmisc.c (maintenance_print_symbols): Use stdio_file.
* symtab.h (struct symbol_computed_ops) <generate_c_location>:
Take a 'string_file *' instead of a 'ui_file *'.
* top.c (new_ui): Use stdio_file and stderr_file.
(free_ui): Use delete.
(execute_command_to_string): Use string_file.
(quit_confirm): Use string_file.
* tracepoint.c (collection_list::append_exp): Use string_file.
* tui/tui-disasm.c (tui_disassemble): Use string_file.
* tui/tui-file.c: Don't include "ui-file.h".
(enum streamtype, struct tui_stream): Delete.
(tui_file_new, tui_file_delete, tui_fileopen, tui_sfileopen)
(tui_file_isatty, tui_file_rewind, tui_file_put): Delete.
(tui_file::tui_file): New method.
(tui_file_fputs): Delete.
(tui_file_get_strbuf): Delete.
(tui_file::puts): New method.
(tui_file_adjust_strbuf): Delete.
(tui_file_flush): Delete.
(tui_file::flush): New method.
* tui/tui-file.h: Tweak intro comment.
Include ui-file.h.
(tui_fileopen, tui_sfileopen, tui_file_get_strbuf)
(tui_file_adjust_strbuf): Delete declarations.
(class tui_file): New class.
* tui/tui-io.c (tui_initialize_io): Use tui_file.
* tui/tui-regs.c (tui_restore_gdbout): Use delete.
(tui_register_format): Use string_stream.
* tui/tui-stack.c (tui_make_status_line): Use string_file.
(tui_get_function_from_frame): Use string_file.
* typeprint.c (type_to_string): Use string_file.
* ui-file.c (struct ui_file, ui_file_magic, ui_file_new): Delete.
(null_stream): New global.
(ui_file_delete): Delete.
(ui_file::ui_file): New.
(null_file_isatty): Delete.
(ui_file::~ui_file): New.
(null_file_rewind): Delete.
(ui_file::printf): New.
(null_file_put): Delete.
(null_file_flush): Delete.
(ui_file::putstr): New.
(null_file_write): Delete.
(ui_file::putstrn): New.
(null_file_read): Delete.
(ui_file::putc): New.
(null_file_fputs): Delete.
(null_file_write_async_safe): Delete.
(ui_file::vprintf): New.
(null_file_delete): Delete.
(null_file::write): New.
(null_file_fseek): Delete.
(null_file::puts): New.
(ui_file_data): Delete.
(null_file::write_async_safe): New.
(gdb_flush, ui_file_isatty): Adjust.
(ui_file_put, ui_file_rewind): Delete.
(ui_file_write): Adjust.
(ui_file_write_for_put): Delete.
(ui_file_write_async_safe, ui_file_read): Adjust.
(ui_file_fseek): Delete.
(fputs_unfiltered): Adjust.
(set_ui_file_flush, set_ui_file_isatty, set_ui_file_rewind)
(set_ui_file_put, set_ui_file_write, set_ui_file_write_async_safe)
(set_ui_file_read, set_ui_file_fputs, set_ui_file_fseek)
(set_ui_file_data): Delete.
(string_file::~string_file, string_file::write)
(struct accumulated_ui_file, do_ui_file_xstrdup, ui_file_xstrdup)
(do_ui_file_as_string, ui_file_as_string): Delete.
(do_ui_file_obsavestring, ui_file_obsavestring): Delete.
(struct mem_file): Delete.
(mem_file_new): Delete.
(stdio_file::stdio_file): New.
(mem_file_delete): Delete.
(stdio_file::stdio_file): New.
(mem_fileopen): Delete.
(stdio_file::~stdio_file): New.
(mem_file_rewind): Delete.
(stdio_file::set_stream): New.
(mem_file_put): Delete.
(stdio_file::open): New.
(mem_file_write): Delete.
(stdio_file_magic, struct stdio_file): Delete.
(stdio_file_new, stdio_file_delete, stdio_file_flush): Delete.
(stdio_file::flush): New.
(stdio_file_read): Rename to ...
(stdio_file::read): ... this. Adjust.
(stdio_file_write): Rename to ...
(stdio_file::write): ... this. Adjust.
(stdio_file_write_async_safe): Rename to ...
(stdio_file::write_async_safe) ... this. Adjust.
(stdio_file_fputs): Rename to ...
(stdio_file::puts) ... this. Adjust.
(stdio_file_isatty): Delete.
(stdio_file_fseek): Delete.
(stdio_file::isatty): New.
(stderr_file_write): Rename to ...
(stderr_file::write) ... this. Adjust.
(stderr_file_fputs): Rename to ...
(stderr_file::puts) ... this. Adjust.
(stderr_fileopen, stdio_fileopen, gdb_fopen): Delete.
(stderr_file::stderr_file): New.
(tee_file_magic): Delete.
(struct tee_file): Delete.
(tee_file::tee_file): New.
(tee_file_new): Delete.
(tee_file::~tee_file): New.
(tee_file_delete): Delete.
(tee_file_flush): Rename to ...
(tee_file::flush): ... this. Adjust.
(tee_file_write): Rename to ...
(tee_file::write): ... this. Adjust.
(tee_file::write_async_safe): New.
(tee_file_fputs): Rename to ...
(tee_file::puts): ... this. Adjust.
(tee_file_isatty): Rename to ...
(tee_file::isatty): ... this. Adjust.
* ui-file.h (struct obstack, struct ui_file): Don't
forward-declare.
(ui_file_new, ui_file_flush_ftype, set_ui_file_flush)
(ui_file_write_ftype)
(set_ui_file_write, ui_file_fputs_ftype, set_ui_file_fputs)
(ui_file_write_async_safe_ftype, set_ui_file_write_async_safe)
(ui_file_read_ftype, set_ui_file_read, ui_file_isatty_ftype)
(set_ui_file_isatty, ui_file_rewind_ftype, set_ui_file_rewind)
(ui_file_put_method_ftype, ui_file_put_ftype, set_ui_file_put)
(ui_file_delete_ftype, set_ui_file_data, ui_file_fseek_ftype)
(set_ui_file_fseek): Delete.
(ui_file_data, ui_file_delete, ui_file_rewind)
(struct ui_file): New.
(ui_file_up): New.
(class null_file): New.
(null_stream): Declare.
(ui_file_write_for_put, ui_file_put): Delete.
(ui_file_xstrdup, ui_file_as_string, ui_file_obsavestring):
Delete.
(ui_file_fseek, mem_fileopen, stdio_fileopen, stderr_fileopen)
(gdb_fopen, tee_file_new): Delete.
(struct string_file): New.
(struct stdio_file): New.
(stdio_file_up): New.
(struct stderr_file): New.
(class tee_file): New.
* ui-out.c (ui_out::field_stream): Take a 'string_file &' instead
of a 'ui_file *'. Adjust.
* ui-out.h (class ui_out) <field_stream>: Likewise.
* utils.c (do_ui_file_delete, make_cleanup_ui_file_delete)
(null_stream): Delete.
(error_stream): Take a 'string_file &' instead of a 'ui_file *'.
Adjust.
* utils.h (struct ui_file): Delete forward declaration..
(make_cleanup_ui_file_delete, null_stream): Delete declarations.
(error_stream): Take a 'string_file &' instead of a
'ui_file *'.
* varobj.c (varobj_value_get_print_value): Use string_file.
* xtensa-tdep.c (xtensa_verify_config): Use string_file.
* gdbarch.c: Regenerate.
Changes in v4:
- Replaced phex call with hex_string.
Changes in v3:
- Addressed comments by Pedro.
- Output of memory region size now in hex format.
- Misc formatting fixups.
- Addressed Simon's comments on formatting.
- Adjusted command text in the manual entry.
- Fixed up ChangeLog.
- Renamed flash_erase_all_command to flash_erase_command.
Changes in v2:
- Added NEWS entry.
- Fixed long lines.
- Address printing with paddress.
Years ago we contributed flash programming patches upstream. The following
patch is a leftover one that complements that functionality by adding a new
command to erase all reported flash memory blocks.
The command is most useful when we're dealing with flash-enabled targets
(mostly bare-metal) and we need to reset the board for some reason.
The wiping out of flash memory regions should help the target come up with a
known clean state from which the user can load a new image and resume
debugging. It is convenient enough to do this from the debugger, and there is
also an MI command to expose this functionality to the IDE's.
gdb/doc/ChangeLog:
2017-01-20 Mike Wrighton <mike_wrighton@codesourcery.com>
Luis Machado <lgustavo@codesourcery.com>
* gdb.texinfo (-target-flash-erase): New MI command description.
(flash-erase): New CLI command description.
gdb/ChangeLog:
2017-01-20 Mike Wrighton <mike_wrighton@codesourcery.com>
Luis Machado <lgustavo@codesourcery.com>
* NEWS (New commands): Mention flash-erase.
(New MI commands): Mention target-flash-erase.
* mi/mi-cmds.c (mi_cmd_target_flash_erase): Add target-flash-erase MI
command.
* mi/mi-cmds.h (mi_cmd_target_flash_erase): New declaration.
* mi/mi-main.c (mi_cmd_target_flash_erase): New function.
* target.c (flash_erase_command): New function.
(initialize_targets): Add new flash-erase command.
* target.h (flash_erase_command): New declaration.
This applies the second part of GDB's End of Year Procedure, which
updates the copyright year range in all of GDB's files.
gdb/ChangeLog:
Update copyright year range in all GDB files.
This patch fixes a few problems with GDB's time handling.
#1 - It avoids problems with gnulib's C++ namespace support
On MinGW, the struct timeval that should be passed to gnulib's
gettimeofday replacement is incompatible with libiberty's
timeval_sub/timeval_add. That's because gnulib also replaces "struct
timeval" with its own definition, while libiberty expects the
system's.
E.g., in code like this:
gettimeofday (&prompt_ended, NULL);
timeval_sub (&prompt_delta, &prompt_ended, &prompt_started);
timeval_add (&prompt_for_continue_wait_time,
&prompt_for_continue_wait_time, &prompt_delta);
That's currently handled in gdb by not using gnulib's gettimeofday at
all (see common/gdb_sys_time.h), but that #undef hack won't work with
if/when we enable gnulib's C++ namespace support, because that mode
adds compile time warnings for uses of ::gettimeofday, which are hard
errors with -Werror.
#2 - But there's an elephant in the room: gettimeofday is not monotonic...
We're using it to:
a) check how long functions take, for performance analysis
b) compute when in the future to fire events in the event-loop
c) print debug timestamps
But that's exactly what gettimeofday is NOT meant for. Straight from
the man page:
~~~
The time returned by gettimeofday() is affected by
discontinuous jumps in the system time (e.g., if the system
administrator manually changes the system time). If you need a
monotonically increasing clock, see clock_gettime(2).
~~~
std::chrono (part of the C++11 standard library) has a monotonic clock
exactly for such purposes (std::chrono::steady_clock). This commit
switches to use that instead of gettimeofday, fixing all the issues
mentioned above.
gdb/ChangeLog:
2016-11-23 Pedro Alves <palves@redhat.com>
* Makefile.in (SFILES): Add common/run-time-clock.c.
(HFILES_NO_SRCDIR): Add common/run-time-clock.h.
(COMMON_OBS): Add run-time-clock.o.
* common/run-time-clock.c, common/run-time-clock.h: New files.
* defs.h (struct timeval, print_transfer_performance): Delete
declarations.
* event-loop.c (struct gdb_timer) <when>: Now a
std::chrono::steady_clock::time_point.
(create_timer): use std::chrono::steady_clock instead of
gettimeofday. Use new instead of malloc.
(delete_timer): Use delete instead of xfree.
(duration_cast_timeval): New.
(update_wait_timeout): Use std::chrono::steady_clock instead of
gettimeofday.
* maint.c: Include <chrono> instead of "gdb_sys_time.h", <time.h>
and "timeval-utils.h".
(scoped_command_stats::~scoped_command_stats)
(scoped_command_stats::scoped_command_stats): Use
std::chrono::steady_clock instead of gettimeofday. Use
user_cpu_time_clock instead of get_run_time.
* maint.h: Include "run-time-clock.h" and <chrono>.
(scoped_command_stats): <m_start_cpu_time>: Now a
user_cpu_time_clock::time_point.
<m_start_wall_time>: Now a std::chrono::steady_clock::time_point.
* mi/mi-main.c: Include "run-time-clock.h" and <chrono> instead of
"gdb_sys_time.h" and <sys/resource.h>.
(rusage): Delete.
(mi_execute_command): Use new instead of XNEW.
(mi_load_progress): Use std::chrono::steady_clock instead of
gettimeofday.
(timestamp): Rewrite in terms of std::chrono::steady_clock,
user_cpu_time_clock and system_cpu_time_clock.
(timeval_diff): Delete.
(print_diff): Adjust to use std::chrono::steady_clock,
user_cpu_time_clock and system_cpu_time_clock.
* mi/mi-parse.h: Include "run-time-clock.h" and <chrono> instead
of "gdb_sys_time.h".
(struct mi_timestamp): Change fields types to
std::chrono::steady_clock::time_point, user_cpu_time_clock::time
and system_cpu_time_clock::time_point, instead of struct timeval.
* symfile.c: Include <chrono> instead of <time.h> and
"gdb_sys_time.h".
(struct time_range): New.
(generic_load): Use std::chrono::steady_clock instead of
gettimeofday.
(print_transfer_performance): Replace timeval parameters with a
std::chrono::steady_clock::duration parameter. Adjust.
* utils.c: Include <chrono> instead of "timeval-utils.h",
"gdb_sys_time.h", and <time.h>.
(prompt_for_continue_wait_time): Now a
std::chrono::steady_clock::duration.
(defaulted_query, prompt_for_continue): Use
std::chrono::steady_clock instead of
gettimeofday/timeval_sub/timeval_add.
(reset_prompt_for_continue_wait_time): Use
std::chrono::steady_clock::duration instead of struct timeval.
(get_prompt_for_continue_wait_time): Return a
std::chrono::steady_clock::duration instead of struct timeval.
(vfprintf_unfiltered): Use std::chrono::steady_clock instead of
gettimeofday. Use std::string. Use '.' instead of ':'.
* utils.h: Include <chrono>.
(get_prompt_for_continue_wait_time): Return a
std::chrono::steady_clock::duration instead of struct timeval.
gdb/gdbserver/ChangeLog:
2016-11-23 Pedro Alves <palves@redhat.com>
* debug.c: Include <chrono> instead of "gdb_sys_time.h".
(debug_vprintf): Use std::chrono::steady_clock instead of
gettimeofday. Use '.' instead of ':'.
* tracepoint.c: Include <chrono> instead of "gdb_sys_time.h".
(get_timestamp): Use std::chrono::steady_clock instead of
gettimeofday.
Now that we require C++11, use std::unique_ptr and std::move directly.
gdb/ChangeLog:
2016-11-15 Pedro Alves <palves@redhat.com>
* ada-lang.c (create_excep_cond_exprs): Use std::move instead of
gdb::move.
* break-catch-throw.c (handle_gnu_v3_exceptions): Use
std::unique_ptr instead of gdb::unique_ptr.
* breakpoint.c (watch_command_1): Use std::move instead of
gdb::move.
* cli/cli-dump.c (dump_memory_to_file, restore_binary_file): Use
std::unique_ptr instead of gdb::unique_ptr.
* dtrace-probe.c (dtrace_process_dof_probe): Use std::move instead
of gdb::move.
* elfread.c (elf_read_minimal_symbols): Use std::unique_ptr
instead of gdb::unique_ptr.
* mi/mi-main.c (mi_cmd_data_read_memory): Use std::unique_ptr
instead of gdb::unique_ptr.
* parse.c (parse_expression_for_completion): Use std::move instead
of gdb::move.
* printcmd.c (display_command): std::move instead of gdb::move.
Noticed we could do this while working on the expression_up change.
The main goal here was getting rid of the
encode_actions_and_make_cleanup / do_clear_collection_list cleanups.
While at it, uncrustify the code:
- Make collection_list a C++ class, with data members private (and
thus renamed m_...).
- Make related functions be member methods.
- Use std::vector instead of an open coding a vector implementation.
- Use std::sort instead of qsort.
- Rename the "list" member of collection_list, which is an incredibly
obfuscating name.
- Rename a couple other things here and there for clarify.
- Use "bool" more.
gdb/ChangeLog:
2016-11-08 Pedro Alves <palves@redhat.com>
* mi/mi-main.c (print_variable_or_computed): Constify 'expression'
parameter.
(mi_cmd_trace_frame_collected): Call encode_actions instead of
encode_actions_and_make_cleanup. Adjust to use std::vector.
* tracepoint.c (memrange_cmp): Delete.
(memrange_comp): New.
(memrange_sortmerge): Take a memrange vector as parameter instead
of a collection_list. Use std::sort instead of qsort.
(add_register): Now a method of collection_list. Adjust to m_
prefix of data fields.
(add_memrange): Now a method of collection_list. Adjust to m_
prefix of data fields. Adjust to use std::vector.
(collect_symbol): Now a method of collection_list. Adjust to m_
prefix of data fields.
(do_collect_symbol): Adjust. Call add_wholly_collected instead of
accessing the vector directly.
(collection_list::add_wholly_collected): New.
(add_local_symbols): Now a method of collection_list.
(add_static_trace_data): Now a method of collection_list. Adjust
to use bool.
(clear_collection_list, do_clear_collection_list): Delete.
(init_collection_list): Delete.
(collection_list::collection_list): New.
(collection_list::~collection_list): New.
(stringify_collection_list): Rename to ...
(collection_list::stringify): ... this and adjust to being a
method of collection_list. Adjust to use of std::vector.
(append_exp): Now a method of collection_list. Use
ui_file_as_string. Adjust to std::vector.
(collection_list::finish): New.
(encode_actions_1): Adjust.
(encode_actions_and_make_cleanup): Rename to ...
(encode_actions)... this. No longer returns a cleanup. No longer
call init_collection_list nor install do_clear_collection_list
cleanups. Call collection_list::finish instead of
memrange_sortmerge directly.
(encode_actions_rsp): Adjust to call encode_actions instead of
encode_actions_and_make_cleanup. Adjust to method renames.
(add_aexpr): Now a method of collection_list.
* tracepoint.h: Include <vector> and <string>.
(struct memrange): Add constructors.
(struct collection_list): Now a class.
(class collection_list) <collection_list, ~collection_list,
add_wholly_collected, append_exp, add_aexpr, add_register,
add_memrange, collect_symbol, add_local_symbols,
add_static_trace_data, finish, stringify, wholly_collected, and
computed>: New methods.
<regs_mask>: Rename to ...
<m_regs_mask>: ... this.
<listsize, next_memrange, list>: Delete fields.
<m_memranges>: New field.
<aexpr_listsize, next_aexpr_elt, aexpr_list>: Delete fields.
<m_aexprs>: New field.
<strace_data>: Rename to ...
<m_strace_data>: ... this. Now a bool.
<wholly_collected>: Rename to ...
<m_wholly_collected>: ... this. Now a std::vector<std::string>.
<computed>: Rename to ...
<m_computed>: ... this. Now a std::vector<std::string>.
(encode_actions_and_make_cleanup): Delete declaration.
(encode_actions): New declaration.
This patch makes parse_expression and friends return a unique_ptr
instead of raw pointer [1]:
typedef gdb::unique_malloc_ptr<expression> expression_up;
and then adjusts the codebase throughout to stop using cleanups to
manage lifetime of expression pointers.
Whenever I found a structure owning an expression pointer, I made it
store a unique_ptr instead of a raw pointer, which then requires using
new/delete of the holding structure, instead of XNEW/xfree.
[1] - I'd like to set the rule that types named with an "_up" suffix
are unique_ptr typedefs.
Note I used gdb::unique_xmalloc_ptr instead of gdb::unique_ptr, simply
because we still use xmalloc instead of new to allocate expression
objects. Once that's changed, all we need to do is change the
expression_up typedef and the smart pointer will then call delete
instead of xfree.
gdb/ChangeLog:
2016-11-08 Pedro Alves <palves@redhat.com>
* ada-lang.c (ada_read_renaming_var_value): Use expression_up.
(struct ada_catchpoint_location) <excep_cond_expr>: Now an
expression_up.
(ada_catchpoint_location_dtor): Reset excep_cond_expr instead of
using xfree.
(create_excep_cond_exprs): Use expression_up and gdb::move.
(allocate_location_exception): Use new instead of XNEW.
(should_stop_exception): Likewise. Adjust to use expression_up.
(create_ada_exception_catchpoint): Use new instead of XNEW.
* ax-gdb.c (agent_eval_command_one): Use expression_up instead of
cleanups.
(maint_agent_printf_command): Use expression_up.
* break-catch-sig.c (create_signal_catchpoint): Use new instead of
XNEW.
* break-catch-syscall.c (create_syscall_event_catchpoint):
Likewise.
* break-catch-throw.c (handle_gnu_v3_exceptions): Use new instead
of XCNEW. Use gdb::unique_ptr instead of cleanups.
* breakpoint.c (set_breakpoint_condition, update_watchpoint)
(parse_cmd_to_aexpr, watchpoint_check)
(bpstat_check_breakpoint_conditions, watchpoint_locations_match):
Adjust to use expression_up.
(init_bp_location): Adjust.
(free_bp_location): Use delete instead of xfree.
(set_raw_breakpoint_without_location, set_raw_breakpoint)
(add_solib_catchpoint, create_fork_vfork_event_catchpoint)
(new_single_step_breakpoint, create_breakpoint_sal): Use new
instead of XNEW.
(find_condition_and_thread): Adjust to use expression_up.
(create_breakpoint): Use new instead of XNEW.
(dtor_watchpoint): Don't xfree expression pointers, they're
unique_ptr's now.
(insert_watchpoint, remove_watchpoint): Adjust.
(watch_command_1): Use expression_up. Use new instead of XCNEW.
(catch_exec_command_1): Use new instead of XNEW.
(bp_location_dtor): Don't xfree expression pointers, they're
unique_ptr's now.
(base_breakpoint_allocate_location)
(strace_marker_create_breakpoints_sal): Use new instead of XNEW.
(delete_breakpoint): Use delete instead of xfree.
* breakpoint.h (struct bp_location) <cond>: Now an
unique_ptr<expression> instead of a raw pointer.
(struct watchpoint) <exp, cond_exp>: Likewise.
* cli/cli-script.c (execute_control_command): Use expression_up
instead of cleanups.
* dtrace-probe.c (dtrace_process_dof_probe): Use expression_up.
* eval.c (parse_and_eval_address, parse_and_eval_long)
(parse_and_eval, parse_to_comma_and_eval, parse_and_eval_type):
Use expression_up instead of cleanups.
* expression.h (expression_up): New typedef.
(parse_expression, parse_expression_with_language, parse_exp_1):
Change return type to expression_up.
* mi/mi-main.c (mi_cmd_data_evaluate_expression)
(print_variable_or_computed): Use expression_up.
* objc-lang.c (print_object_command): Use expression_up instead of
cleanups.
* parse.c (parse_exp_1, parse_exp_in_context)
(parse_exp_in_context_1, parse_expression)
(parse_expression_with_language): Return an expression_up instead
of a raw pointer.
(parse_expression_for_completion): Use expression_up.
* printcmd.c (struct display) <exp>: Now an expression_up instead
of a raw pointer.
(print_command_1, output_command_const, set_command, x_command):
Use expression_up instead of cleanups.
(display_command): Likewise. Use new instead of XNEW.
(free_display): Use delete instead of xfree.
(do_one_display): Adjust to use expression_up.
* remote.c (remote_download_tracepoint): Likewise.
* stack.c (return_command): Likewise.
* tracepoint.c (validate_actionline, encode_actions_1): Use
expression_up instead of cleanups.
* typeprint.c (whatis_exp, maintenance_print_type): Likewise.
* value.c (init_if_undefined_command): Likewise.
* varobj.c (struct varobj_root) <exp>: Now an expression_up
instead of a raw pointer.
(varobj_create): Adjust.
(varobj_set_value): Use an expression_up instead of cleanups.
(new_root_variable): Use new instead of XNEW.
(free_variable): Use delete instead of xfree.
(value_of_root_1): Use std::swap.
This patch removes a couple of cleanups from MI by using
gdb::unique_ptr.
2016-10-21 Tom Tromey <tom@tromey.com>
* mi/mi-main.c (mi_cmd_data_read_memory): Use gdb::unique_ptr.
Remove some cleanups.
This patch replaces many (but not all) uses of
make_cleanup_restore_integer with a simple RAII-based template class.
It also removes the similar restore_execution_direction cleanup in
favor of this new class. Subsequent patches will replace other
similar cleanups with this class.
The class is typically instantiated using make_scoped_restore. This
allows for template argument deduction.
2016-10-21 Tom Tromey <tom@tromey.com>
* common/scoped_restore.h: New file.
* utils.h: Include scoped_restore.h.
* top.c (execute_command_to_string): Use scoped_restore.
* python/python.c (python_interactive_command): Use
scoped_restore.
(python_command, execute_gdb_command): Likewise.
* printcmd.c (do_one_display): Use scoped_restore.
* mi/mi-main.c (exec_continue): Use scoped_restore.
* mi/mi-cmd-var.c (mi_cmd_var_assign): Use scoped_restore.
* linux-fork.c (checkpoint_command): Use scoped_restore.
* infrun.c (restore_execution_direction): Remove.
(fetch_inferior_event): Use scoped_restore.
* compile/compile.c (compile_file_command): Use
scoped_restore.
(compile_code_command, compile_print_command): Likewise.
* cli/cli-script.c (execute_user_command): Use
scoped_restore.
(while_command, if_command, script_from_file): Likewise.
* arm-tdep.c (arm_insert_single_step_breakpoint): Use
scoped_restore.
-trace-save doesn't check whether an argument is passed, leading to a
segfault if you pass nothing.
I added a small test, which only tests the error conditions of
-trace-save.
gdb/ChangeLog:
* mi/mi-main.c (mi_cmd_trace_save): Check if argument is present
before using it.
gdb/testsuite/ChangeLog:
* gdb.trace/mi-trace-save.exp: New file.
With this patch, when an inferior, thread or frame is explicitly
selected by the user, notifications will appear on all CLI and MI UIs.
When a GDB console is integrated in a front-end, this allows the
front-end to follow a selection made by the user ont he CLI, and it
informs the user about selection changes made behind the scenes by the
front-end.
This patch addresses PR gdb/20487.
In order to communicate frame changes to the front-end, this patch adds
a new field to the =thread-selected event for the selected frame. The
idea is that since inferior/thread/frame can be seen as a composition,
it makes sense to send them together in the same event. The vision
would be to eventually send the inferior information as well, if we find
that it's needed, although the "=thread-selected" event would be
ill-named for that job.
Front-ends need to handle this new field if they want to follow the
frame selection changes that originate from the console. The format of
the frame attribute is the same as what is found in the *stopped events.
Here's a detailed example for each command and the events they generate:
thread
------
1. CLI command:
thread 1.3
MI event:
=thread-selected,id="3",frame={...}
2. MI command:
-thread-select 3
CLI event:
[Switching to thread 1.3 ...]
3. MI command (CLI-in-MI):
thread 1.3
MI event/reply:
&"thread 1.3\n"
~"#0 child_sub_function () ...
=thread-selected,id="3",frame={level="0",...}
^done
frame
-----
1. CLI command:
frame 1
MI event:
=thread-selected,id="3",frame={level="1",...}
2. MI command:
-stack-select-frame 1
CLI event:
#1 0x00000000004007f0 in child_function...
3. MI command (CLI-in-MI):
frame 1
MI event/reply:
&"frame 1\n"
~"#1 0x00000000004007f9 in ..."
=thread-selected,id="3",frame={level="1"...}
^done
inferior
--------
Inferior selection events only go from the console to MI, since there's
no way to select the inferior in pure MI.
1. CLI command:
inferior 2
MI event:
=thread-selected,id="3"
Note that if the user selects an inferior that is not started or exited,
the MI doesn't receive a notification. Since there is no threads to
select, the =thread-selected event does not apply...
2. MI command (CLI-in-MI):
inferior 2
MI event/reply:
&"inferior 2\n"
~"[Switching to inferior 2 ...]"
=thread-selected,id="4",frame={level="0"...}
^done
Internal implementation detail: this patch makes it possible to suppress
notifications caused by a CLI command, like what is done in mi-interp.c.
This means that it's now possible to use the
add_com_suppress_notification function to register a command with some
event suppressed. It is used to implement the select-frame command in
this patch.
The function command_notifies_uscc_observer was added to extract
the rather complicated logical expression from the if statement. It is
also now clearer what that logic does: if the command used by the user
already notifies the user_selected_context_changed observer, there is
not need to notify it again. It therefore protects again emitting the
event twice.
No regressions, tested on ubuntu 14.04 x86 with target boards unix and
native-extended-gdbserver.
gdb/ChangeLog:
YYYY-MM-DD Antoine Tremblay <antoine.tremblay@ericsson.com>
YYYY-MM-DD Simon Marchi <simon.marchi@ericsson.com>
PR gdb/20487
* NEWS: Mention new frame field of =thread-selected event.
* cli/cli-decode.c (add_cmd): Initialize c->suppress_notification.
(add_com_suppress_notification): New function definition.
(cmd_func): Set and restore the suppress_notification flag.
* cli/cli-deicode.h (struct cmd_list_element)
<suppress_notification>: New field.
* cli/cli-interp.c (cli_suppress_notification): New global variable.
(cli_on_user_selected_context_changed): New function.
(_initialize_cli_interp): Attach to user_selected_context_changed
observer.
* command.h (struct cli_suppress_notification): New structure.
(cli_suppress_notification): New global variable declaration.
(add_com_suppress_notification): New function declaration.
* defs.h (enum user_selected_what_flag): New enum.
(user_selected_what): New enum flag type.
* frame.h (print_stack_frame_to_uiout): New function declaration.
* gdbthread.h (print_selected_thread_frame): New function declaration.
* inferior.c (print_selected_inferior): New function definition.
(inferior_command): Remove printing of inferior/thread/frame switch
notifications, notify user_selected_context_changed observer.
* inferior.h (print_selected_inferior): New function declaration.
* mi/mi-cmds.c (struct mi_cmd): Add user_selected_context
suppression to stack-select-frame and thread-select commands.
* mi/mi-interp.c (struct mi_suppress_notification)
<user_selected_context>: Initialize.
(mi_user_selected_context_changed): New function definition.
(_initialize_mi_interp): Attach to user_selected_context_changed.
* mi/mi-main.c (mi_cmd_thread_select): Print thread selection reply.
(mi_execute_command): Handle notification suppression. Notify
user_selected_context_changed observer on thread change instead of printing
event directly. Don't send it if command already sends the notification.
(command_notifies_uscc_observer): New function.
(mi_cmd_execute): Don't handle notification suppression.
* mi/mi-main.h (struct mi_suppress_notification)
<user_selected_context>: New field.
* stack.c (print_stack_frame_to_uiout): New function definition.
(select_frame_command): Notify user_selected_context_changed
observer.
(frame_command): Call print_selected_thread_frame if there's no frame
change or notify user_selected_context_changed observer if there is.
(up_command): Notify user_selected_context_changed observer.
(down_command): Likewise.
(_initialize_stack): Suppress user_selected_context notification for
command select-frame.
* thread.c (thread_command): Notify
user_selected_context_changed if the thread has changed, print
thread info directly if it hasn't.
(do_captured_thread_select): Do not print thread switch event.
(print_selected_thread_frame): New function definition.
* tui/tui-interp.c (tui_on_user_selected_context_changed):
New function definition.
(_initialize_tui_interp): Attach to user_selected_context_changed
observer.
gdb/doc/ChangeLog:
PR gdb/20487
* gdb.texinfo (Context management): Update mention of frame
change notifications.
(gdb/mi Async Records): Document frame field in
=thread-select event.
* observer.texi (GDB Observers): New user_selected_context_changed
observer.
gdb/testsuite/ChangeLog:
PR gdb/20487
* gdb.mi/mi-pthreads.exp (check_mi_thread_command_set): Adapt
=thread-select-event check.
gdb 7.11 introduced an MI regression: a failing MI sync execution
command misses printing the MI prompt, and then all subsequent command
miss it too:
$ gdb-7.11.1 -i=mi
[...]
p 1
&"p 1\n"
~"$1 = 1"
~"\n"
^done
(gdb) <<< prompted ok
-exec-continue
^error,msg="The program is not being run." <<< missing prompt after this
print 1
&"print 1\n"
~"$2 = 1"
~"\n"
^done <<< missing prompt after this
gdb 7.10.1 behaved correctly, even with "set mi-async on":
-exec-continue
^error,msg="The program is not being run."
(gdb) <<< prompted ok
etc.
Bisecting points at:
commit 0b333c5e7d
Author: Pedro Alves <palves@redhat.com>
Date: Wed Sep 9 18:23:23 2015 +0100
Merge async and sync code paths some more
[...]
The problem is that when an exception is thrown, we leave the prompt
state set to PROMPT_BLOCKED, and then mi_execute_command_input_handler
doesn't print the prompt. It used to work because before that patch,
we happened to skip disabling stdin if the current target didn't do
async (which it never does before execution).
I was surprised to find that this bug isn't caught by the testsuite,
so I made a thorough test that tests all combinations of pairs of:
- a failing synchronous execution command
- a failing non-execution command
- a non-failing command
gdb/ChangeLog:
2016-08-09 Pedro Alves <palves@redhat.com>
PR mi/20431
* mi/mi-main.c (mi_execute_command): Enable input and set prompt
state to PROMPT_NEEDED.
gdb/testsuite/ChangeLog:
2016-08-09 Pedro Alves <palves@redhat.com>
PR mi/20431
* gdb.mi/mi-cmd-error.exp: New file.
PR gdb/17210 concerns a possible memory leak in read_memory_robust.
The bug can happen because read_memory_robust allocates memory, does
not install any cleanups, and invokes QUIT. Similarly, target_read
calls QUIT, so it too can potentially throw.
The fix is to install cleanups to guard the allocated memory.
Built and regtested on x86-64 Fedora 23. I couldn't think of a way to
test this, so no new test; and of course this means it should have
more careful review.
2016-06-29 Tom Tromey <tom@tromey.com>
PR gdb/17210:
* target.c (free_memory_read_result_vector): Take a pointer to the
VEC as an argument.
(read_memory_robust): Install a cleanup for "result".
* mi/mi-main.c (mi_cmd_data_read_memory_bytes): Update.
There's code in the MI interpreter that decides whether a stop should
be sent to MI's console stream. Move this check to the CLI
interpreter code, so that we can reuse it in both the CLI and TUI
interpreters.
gdb/ChangeLog:
2016-06-21 Pedro Alves <palves@redhat.com>
* cli/cli-interp.c: Include gdbthread.h and thread-fsm.h.
(should_print_stop_to_console): New function, factored out from
mi_on_normal_stop_1.
* cli/cli-interp.h (should_print_stop_to_console): Declare.
* mi/mi-interp.c (mi_on_normal_stop_1): Use
should_print_stop_to_console. Pass it the current UI's console
interpreter.
* mi/mi-main.c (captured_mi_execute_command): Use the
INTERP_CONSOLE symbol rather than explicit "console".
Tom Tromey
Simon Marchi
Simon Marchi
Pedro Alves
John Baldwin
Alan Hayward
Luis Machado
Joel Brobecker
Yao Qi
Antoine Tremblay