This is a follow-up to an earlier patch. It changes breakpoint's
location and location_range_end members to be of type
event_location_up, then fixes up the users.
gdb/ChangeLog
2017-04-12 Tom Tromey <tom@tromey.com>
* remote.c (remote_download_tracepoint): Update.
* python/py-breakpoint.c (bppy_get_location): Update.
* guile/scm-breakpoint.c (bpscm_print_breakpoint_smob)
(gdbscm_breakpoint_location): Update.
* elfread.c (elf_gnu_ifunc_resolver_return_stop): Update.
* breakpoint.h (struct breakpoint) <location, location_range_end>:
Change type to event_location_up.
* breakpoint.c (create_overlay_event_breakpoint)
(create_longjmp_master_breakpoint)
(create_std_terminate_master_breakpoint)
(create_exception_master_breakpoint)
(breakpoint_event_location_empty_p, print_breakpoint_location)
(print_one_breakpoint_location, create_thread_event_breakpoint)
(init_breakpoint_sal, create_breakpoint)
(print_recreate_ranged_breakpoint, break_range_command)
(init_ada_exception_breakpoint, say_where): Update.
(base_breakpoint_dtor): Don't call delete_event_location.
(bkpt_print_recreate, tracepoint_print_recreate)
(dprintf_print_recreate, update_static_tracepoint)
(breakpoint_re_set_default): Update.
This introduces a new specialization of gdb::ref_ptr that can be used
to manage BFD reference counts. Then it changes most places in gdb to
use this new class, rather than explicit reference-counting or
cleanups. This patch removes make_cleanup_bfd_unref.
If you look you will see a couple of spots using "release" where a use
of gdb_bfd_ref_ptr would be cleaner. These will be fixed in the next
patch.
I think this patch fixes some latent bugs. For example, it seems to
me that previously objfpy_add_separate_debug_file leaked a BFD.
I'm not 100% certain that the macho_symfile_read_all_oso change is
correct. The existing code here is hard for me to follow. One goal
of this sort of automated reference counting, though, is to make it
more difficult to make logic errors; so hopefully the code is clear
now.
2017-01-10 Tom Tromey <tom@tromey.com>
* windows-tdep.c (windows_xfer_shared_library): Update.
* windows-nat.c (windows_make_so): Update.
* utils.h (make_cleanup_bfd_unref): Remove.
* utils.c (do_bfd_close_cleanup, make_cleanup_bfd_unref): Remove.
* symfile.h (symfile_bfd_open)
(find_separate_debug_file_in_section): Return gdb_bfd_ref_ptr.
* symfile.c (read_symbols, symbol_file_add)
(separate_debug_file_exists): Update.
(symfile_bfd_open): Return gdb_bfd_ref_ptr.
(generic_load, reread_symbols): Update.
* symfile-mem.c (symbol_file_add_from_memory): Update.
* spu-linux-nat.c (spu_bfd_open): Return gdb_bfd_ref_ptr.
(spu_symbol_file_add_from_memory): Update.
* solist.h (struct target_so_ops) <bfd_open>: Return
gdb_bfd_ref_ptr.
(solib_bfd_fopen, solib_bfd_open): Return gdb_bfd_ref_ptr.
* solib.c (solib_bfd_fopen, solib_bfd_open): Return
gdb_bfd_ref_ptr.
(solib_map_sections, reload_shared_libraries_1): Update.
* solib-svr4.c (enable_break): Update.
* solib-spu.c (spu_bfd_fopen): Return gdb_bfd_ref_ptr.
* solib-frv.c (enable_break2): Update.
* solib-dsbt.c (enable_break): Update.
* solib-darwin.c (gdb_bfd_mach_o_fat_extract): Return
gdb_bfd_ref_ptr.
(darwin_solib_get_all_image_info_addr_at_init): Update.
(darwin_bfd_open): Return gdb_bfd_ref_ptr.
* solib-aix.c (solib_aix_bfd_open): Return gdb_bfd_ref_ptr.
* record-full.c (record_full_save): Update.
* python/py-objfile.c (objfpy_add_separate_debug_file): Update.
* procfs.c (insert_dbx_link_bpt_in_file): Update.
* minidebug.c (find_separate_debug_file_in_section): Return
gdb_bfd_ref_ptr.
* machoread.c (macho_add_oso_symfile): Change abfd to
gdb_bfd_ref_ptr.
(macho_symfile_read_all_oso): Update.
(macho_check_dsym): Return gdb_bfd_ref_ptr.
(macho_symfile_read): Update.
* jit.c (bfd_open_from_target_memory): Return gdb_bfd_ref_ptr.
(jit_bfd_try_read_symtab): Update.
* gdb_bfd.h (gdb_bfd_open, gdb_bfd_fopen, gdb_bfd_openr)
(gdb_bfd_openw, gdb_bfd_openr_iovec)
(gdb_bfd_openr_next_archived_file, gdb_bfd_fdopenr): Return
gdb_bfd_ref_ptr.
(gdb_bfd_ref_policy): New struct.
(gdb_bfd_ref_ptr): New typedef.
* gdb_bfd.c (gdb_bfd_open, gdb_bfd_fopen, gdb_bfd_openr)
(gdb_bfd_openw, gdb_bfd_openr_iovec)
(gdb_bfd_openr_next_archived_file, gdb_bfd_fdopenr): Return
gdb_bfd_ref_ptr.
* gcore.h (create_gcore_bfd): Return gdb_bfd_ref_ptr.
* gcore.c (create_gcore_bfd): Return gdb_bfd_ref_ptr.
(gcore_command): Update.
* exec.c (exec_file_attach): Update.
* elfread.c (elf_symfile_read): Update.
* dwarf2read.c (dwarf2_get_dwz_file): Update.
(try_open_dwop_file, open_dwo_file): Return gdb_bfd_ref_ptr.
(open_and_init_dwo_file): Update.
(open_dwp_file): Return gdb_bfd_ref_ptr.
(open_and_init_dwp_file): Update.
* corelow.c (core_open): Update.
* compile/compile-object-load.c (compile_object_load): Update.
* common/gdb_ref_ptr.h (ref_ptr::operator->): New operator.
* coffread.c (coff_symfile_read): Update.
* cli/cli-dump.c (bfd_openr_or_error, bfd_openw_or_error): Return
gdb_bfd_ref_ptr. Rename.
(dump_bfd_file, restore_command): Update.
* build-id.h (build_id_to_debug_bfd): Return gdb_bfd_ref_ptr.
* build-id.c (build_id_to_debug_bfd): Return gdb_bfd_ref_ptr.
(find_separate_debug_file_by_buildid): Update.
This applies the second part of GDB's End of Year Procedure, which
updates the copyright year range in all of GDB's files.
gdb/ChangeLog:
Update copyright year range in all GDB files.
With the previous change, value.location.address is only valid for
lval_memory. This patch restrict some checking on value.lval on
using address. Since we have a check on VALUE_VAL in
set_value_address, we need to set VALUE_VAL properly before
set_value_address too.
gdb:
2016-11-25 Yao Qi <yao.qi@linaro.org>
* ada-lang.c (ensure_lval): Call set_value_address after setting
VALUE_LVAL.
* elfread.c (elf_gnu_ifunc_resolve_addr): Set VALUE_LVAL to
lval_memory.
(elf_gnu_ifunc_resolver_return_stop): Likewise.
* value.c (value_fn_field): Likewise.
(value_from_contents_and_address_unresolved): Likewise.
(value_from_contents_and_address): Likewise.
(value_address): Check value->lval isn't
lval_memory.
(value_raw_address): Likewise.
(set_value_address): Assert value->lval is lval_memory.
Now that we require C++11, use std::unique_ptr and std::move directly.
gdb/ChangeLog:
2016-11-15 Pedro Alves <palves@redhat.com>
* ada-lang.c (create_excep_cond_exprs): Use std::move instead of
gdb::move.
* break-catch-throw.c (handle_gnu_v3_exceptions): Use
std::unique_ptr instead of gdb::unique_ptr.
* breakpoint.c (watch_command_1): Use std::move instead of
gdb::move.
* cli/cli-dump.c (dump_memory_to_file, restore_binary_file): Use
std::unique_ptr instead of gdb::unique_ptr.
* dtrace-probe.c (dtrace_process_dof_probe): Use std::move instead
of gdb::move.
* elfread.c (elf_read_minimal_symbols): Use std::unique_ptr
instead of gdb::unique_ptr.
* mi/mi-main.c (mi_cmd_data_read_memory): Use std::unique_ptr
instead of gdb::unique_ptr.
* parse.c (parse_expression_for_completion): Use std::move instead
of gdb::move.
* printcmd.c (display_command): std::move instead of gdb::move.
This makes these flag types be "enum flag" types. The benefit is
making use of C++'s stronger typing -- mixing the flags types by
mistake errors at compile time.
This caught one old bug in symbol_file_add_main_1 already, fixed by
this patch as well:
@@ -1318,7 +1326,7 @@ symbol_file_add_main_1 (const char *args, int from_tty, int flags)
what is frameless. */
reinit_frame_cache ();
- if ((flags & SYMFILE_NO_READ) == 0)
+ if ((add_flags & SYMFILE_NO_READ) == 0)
set_initial_language ();
}
Above, "flags" are objfile flags, not symfile_add_flags. So that was
actually checking for "flag & OBJF_PSYMTABS_READ", which has the same
value as SYMFILE_NO_READ...
I moved the flags definitions to separate files to break circular
dependencies.
Built with --enable-targets=all and tested on x86-64 Fedora 23.
gdb/ChangeLog:
2016-10-26 Pedro Alves <palves@redhat.com>
* coffread.c (coff_symfile_read): Use symfile_add_flags.
* dbxread.c (dbx_symfile_read): Ditto.
* elfread.c (elf_symfile_read): Ditto.
* inferior.h: Include symfile-add-flags.h.
(struct inferior) <symfile_flags>: Now symfile_add_flags.
* machoread.c (macho_add_oso_symfile, macho_symfile_read_all_oso)
(macho_symfile_read, mipscoff_symfile_read): Use
symfile_add_flags.
* objfile-flags.h: New file.
* objfiles.c (allocate_objfile): Use objfile_flags.
* objfiles.h: Include objfile-flags.h.
(struct objfile) <flags>: Now an objfile_flags.
(OBJF_REORDERED, OBJF_SHARED, OBJF_READNOW, OBJF_USERLOADED)
(OBJF_PSYMTABS_READ, OBJF_MAINLINE, OBJF_NOT_FILENAME): Delete.
Converted to an enum-flags in objfile-flags.h.
(allocate_objfile): Use objfile_flags.
* python/py-objfile.c (objfpy_add_separate_debug_file): Remove
unnecessary local.
* solib.c (solib_read_symbols, solib_add)
(reload_shared_libraries_1): Use symfile_add_flags.
* solib.h: Include "symfile-add-flags.h".
(solib_read_symbols): Use symfile_add_flags.
* symfile-add-flags.h: New file.
* symfile-debug.c (debug_sym_read): Use symfile_add_flags.
* symfile-mem.c (symbol_file_add_from_memory): Use
symfile_add_flags.
* symfile.c (read_symbols, syms_from_objfile_1)
(syms_from_objfile, finish_new_objfile): Use symfile_add_flags.
(symbol_file_add_with_addrs): Use symfile_add_flags and
objfile_flags.
(symbol_file_add_separate): Use symfile_add_flags.
(symbol_file_add_from_bfd, symbol_file_add): Use symfile_add_flags
and objfile_flags.
(symbol_file_add_main_1): : Use objfile_flags. Fix add_flags vs
flags confusion.
(symbol_file_command): Use objfile_flags.
(add_symbol_file_command): Use symfile_add_flags and
objfile_flags.
(clear_symtab_users): Use symfile_add_flags.
* symfile.h: Include "symfile-add-flags.h" and "objfile-flags.h".
(struct sym_fns) <sym_read>: Use symfile_add_flags.
(clear_symtab_users): Use symfile_add_flags.
(enum symfile_add_flags): Delete, moved to symfile-add-flags.h and
converted to enum-flags.
(symbol_file_add, symbol_file_add_from_bfd)
(symbol_file_add_separate): Use symfile_add_flags.
* xcoffread.c (xcoff_initial_scan): Use symfile_add_flags.
This changes an "int" to a "bool" in the signature for
minimal_symbol_reader::record_full, and then fixes the callers.
2016-10-21 Tom Tromey <tom@tromey.com>
* minsyms.h (minimal_symbol_reader::record_full): "copy_name" now
a bool.
(record, record_with_info): Update.
* minsyms.c (record): Fix indentation.
(record_full): Fix indentation. Update for type change.
* elfread.c (record_minimal_symbol): "copy_name" now a bool.
(elf_symtab_read): "copy_names" now a bool.
(elf_rel_plt_read, elf_read_minimal_symbols): Update.
This changes elf_read_minimal_symbols to use gdb::unique_ptr rather
than an explicit allocation. This removes a cleanup.
2016-10-21 Tom Tromey <tom@tromey.com>
* elfread.c (elf_read_minimal_symbols): Use gdb::unique_ptr.
This changes minimal_symbol_reader to require the objfile to be
passed to the constructor. The class now records the objfile and
automatically uses it later in "install".
This is a minor cleanup that will come in useful in the next patch.
It is separate from the first patch to keep that one a bit simpler to
understand.
2016-10-21 Tom Tromey <tom@tromey.com>
* xcoffread.c (xcoff_initial_scan): Update.
* mipsread.c (mipscoff_symfile_read): Update.
* minsyms.c (minimal_symbol_reader): Add obj argument.
Initialize member.
(install): Remove objfile argument. Update.
* mdebugread.c (elfmdebug_build_psymtabs): Update.
* machoread.c (macho_symfile_read): Update.
* elfread.c (elf_read_minimal_symbols): Update.
* dbxread.c (dbx_symfile_read): Update.
* coffread.c (coff_symfile_read): Update.
* minsyms.h (minimal_symbol_reader): Add m_objfile member.
(constructor): Add objfile argument.
(minimal_symbol_reader::install): Remove objfile argument.
This patch introduced minimal_symbol_reader, a RAII-based class which
replaces the current make_cleanup_discard_minimal_symbols.
2016-10-21 Tom Tromey <tom@tromey.com>
* xcoffread.c (xcoff_initial_scan): Use
minimal_symbol_reader.
* mipsread.c (mipscoff_symfile_read): Use
minimal_symbol_reader.
* minsyms.h (minimal_symbol_reader): New class.
(init_minimal_symbol_collection)
(make_cleanup_discard_minimal_symbols, install_minimal_symbols):
Don't declare.
* minsyms.c (minimal_symbol_reader): Renamed from
init_minimal_symbol_collection, turned into constructor.
(~minimal_symbol_reader): Renamed from
do_discard_minimal_symbols_cleanup, turned into destructor.
(make_cleanup_discard_minimal_symbols): Remove.
(minimal_symbol_reader::install): Rename form
install_minimal_symbols.
* mdebugread.c (elfmdebug_build_psymtabs): Use
minimal_symbol_reader.
* machoread.c (macho_symfile_read): Use
minimal_symbol_reader.
* elfread.c (elf_read_minimal_symbols): Use
minimal_symbol_reader.
* dbxread.c (dbx_symfile_read): Use minimal_symbol_reader.
* coffread.c (coff_symfile_read): Use
minimal_symbol_reader.
On various GNU Elf architectures, including AArch64, ARM, s390/s390x,
ppc32/64, and sparc32/64, the dynamic loader passes HWCAP as a parameter
to each ifunc resolver. Currently there is an open glibc Bugzilla that
requests this to be generalized to all architectures:
https://sourceware.org/bugzilla/show_bug.cgi?id=19766
And various ifunc resolvers already rely on receiving HWCAP. Currently
GDB always calls an ifunc resolver without any arguments; thus the
resolver may receive garbage, and based on that, the resolver may decide
to return a function that is not suited for the given platform.
This patch always passes HWCAP to ifunc resolvers, even on systems where
the dynamic loader currently behaves otherwise. The rationale is
that (1) the dynamic loader may get adjusted on those systems as well in
the future; (2) passing an unused argument should not cause a problem
with existing resolvers; and (3) the logic is much simpler without such
a distinction.
gdb/ChangeLog:
* elfread.c (auxv.h): New include.
(elf_gnu_ifunc_resolve_addr): Pass HWCAP to ifunc resolver.
gdb/testsuite/ChangeLog:
* gdb.base/gnu-ifunc-lib.c (resolver_hwcap): New external
variable declaration.
(gnu_ifunc): Add parameter hwcap. Store it in resolver_hwcap.
* gdb.base/gnu-ifunc.c (resolver_hwcap): New global variable.
* gdb.base/gnu-ifunc.exp: Add test to verify that the resolver
received HWCAP as its argument.
Currently, we always re-set all locations of all breakpoints. This
commit makes us re-set only locations of the current program space.
If we loaded symbols to a program space (e.g., "file" command or some
shared library was loaded), GDB must run through all breakpoints and
determine if any new locations need to be added to the breakpoint.
However, there's no reason to recreate locations for _other_ program
spaces, as those haven't changed.
Similarly, when we create a new inferior, through e.g., a fork, GDB
must run through all breakpoints and determine if any new locations
need to be added to the breakpoint. There's no reason to destroy the
locations of the parent inferior and other inferiors. We know those
won't change.
In addition to being inneficient, resetting breakpoints of inferiors
that are currently running is problematic, because:
- some targets can't read memory while the inferior is running.
- the inferior might exit while we're re-setting its breakpoints,
which may confuse prologue skipping.
I went through all the places where we call breakpoint_re_set, and it
seems to me that all can be changed to only re-set locations of the
current program space.
The patch that reversed threads order in "info threads" etc. happened
to make gdb.threads/fork-plus-thread.exp expose this problem when
testing on x86/-m32. The problem was latent and masked out by chance
by the code-cache:
https://sourceware.org/ml/gdb-patches/2016-01/msg00213.html
Tested on x86-64 F20, native (-m64/-m32) and extended-remote
gdbserver.
Fixes the regression discussed in the url above with --target_board=unix/-m32:
-FAIL: gdb.threads/fork-plus-threads.exp: detach-on-fork=off: inferior 1 exited
+PASS: gdb.threads/fork-plus-threads.exp: detach-on-fork=off: inferior 1 exited
-FAIL: gdb.threads/fork-plus-threads.exp: detach-on-fork=off: no threads left (timeout)
-FAIL: gdb.threads/fork-plus-threads.exp: detach-on-fork=off: only inferior 1 left (the program exited)
+PASS: gdb.threads/fork-plus-threads.exp: detach-on-fork=off: no threads left
+PASS: gdb.threads/fork-plus-threads.exp: detach-on-fork=off: only inferior 1 left
gdb/ChangeLog:
2016-01-19 Pedro Alves <palves@redhat.com>
* ax-gdb.c (agent_command_1): Adjust call to decode_line_full.
* break-catch-throw.c (re_set_exception_catchpoint): Pass the
current program space down to linespec decoding and breakpoint
location updating.
* breakpoint.c (parse_breakpoint_sals): Adjust calls to
decode_line_full.
(until_break_command): Adjust calls to decode_line_1.
(base_breakpoint_decode_location, bkpt_decode_location): Add
'search_pspace' parameter. Pass it along.
(bkpt_probe_create_sals_from_location): Adjust calls to
parse_probes.
(tracepoint_decode_location, tracepoint_probe_decode_location)
(strace_marker_decode_location): Add 'search_pspace' parameter.
Pass it along.
(all_locations_are_pending): Rewrite to take a breakpoint and
program space as arguments instead.
(hoist_existing_locations): New function.
(update_breakpoint_locations): Add 'filter_pspace' parameter. Use
hoist_existing_locations instead of always removing all locations,
and adjust to all_locations_are_pending change.
(location_to_sals): Add 'search_pspace' parameter. Pass it along.
Don't disable the breakpoint if there are other locations in
another program space.
(breakpoint_re_set_default): Adjust to pass down the current
program space as filter program space.
(decode_location_default): Add 'search_pspace' parameter and pass
it along.
(prepare_re_set_context): Don't switch program space here.
(breakpoint_re_set): Use save_current_space_and_thread instead of
save_current_program_space.
* breakpoint.h (struct breakpoint_ops) <decode_location>: Add
'search_pspace' parameter.
(update_breakpoint_locations): Add 'filter_pspace' parameter.
* cli/cli-cmds.c (edit_command, list_command): Adjust calls to
decode_line_1.
* elfread.c (elf_gnu_ifunc_resolver_return_stop): Pass the current
program space as filter program space.
* linespec.c (struct linespec_state) <search_pspace>: New field.
(create_sals_line_offset, convert_explicit_location_to_sals)
(parse_linespec): Pass the search program space down.
(linespec_state_constructor): Add 'search_pspace' parameter.
Store it.
(linespec_parser_new): Add 'search_pspace' parameter and pass it
along.
(linespec_lex_to_end): Adjust.
(decode_line_full, decode_line_1): Add 'search_pspace' parameter
and pass it along.
(decode_line_with_last_displayed): Adjust.
(collect_symtabs_from_filename, symtabs_from_filename): New
'search_pspace' parameter. Use it.
(find_function_symbols): Pass the search program space down.
* linespec.h (decode_line_1, decode_line_full): Add
'search_pspace' parameter.
* probe.c (parse_probes_in_pspace): New function, factored out
from ...
(parse_probes): ... this. Add 'search_pspace' parameter and use
it.
* probe.h (parse_probes): Add pspace' parameter.
* python/python.c (gdbpy_decode_line): Adjust.
* tracepoint.c (scope_info): Adjust.
This commit changes GDB to track thread numbers per-inferior. Then,
if you're debugging multiple inferiors, GDB displays
"inferior-num.thread-num" instead of just "thread-num" whenever it
needs to display a thread:
(gdb) info inferiors
Num Description Executable
1 process 6022 /home/pedro/gdb/tests/threads
* 2 process 6037 /home/pedro/gdb/tests/threads
(gdb) info threads
Id Target Id Frame
1.1 Thread 0x7ffff7fc2740 (LWP 6022) "threads" (running)
1.2 Thread 0x7ffff77c0700 (LWP 6028) "threads" (running)
1.3 Thread 0x7ffff7fc2740 (LWP 6032) "threads" (running)
2.1 Thread 0x7ffff7fc1700 (LWP 6037) "threads" (running)
2.2 Thread 0x7ffff77c0700 (LWP 6038) "threads" (running)
* 2.3 Thread 0x7ffff7fc2740 (LWP 6039) "threads" (running)
(gdb)
...
(gdb) thread 1.1
[Switching to thread 1.1 (Thread 0x7ffff7fc2740 (LWP 8155))]
(gdb)
...
etc.
You can still use "thread NUM", in which case GDB infers you're
referring to thread NUM of the current inferior.
The $_thread convenience var and Python's InferiorThread.num attribute
are remapped to the new per-inferior thread number. It's a backward
compatibility break, but since it only matters when debugging multiple
inferiors, I think it's worth doing.
Because MI thread IDs need to be a single integer, we keep giving
threads a global identifier, _in addition_ to the per-inferior number,
and make MI always refer to the global thread IDs. IOW, nothing
changes from a MI frontend's perspective.
Similarly, since Python's Breakpoint.thread and Guile's
breakpoint-thread/set-breakpoint-thread breakpoint methods need to
work with integers, those are adjusted to work with global thread IDs
too. Follow up patches will provide convenient means to access
threads' global IDs.
To avoid potencially confusing users (which also avoids updating much
of the testsuite), if there's only one inferior and its ID is "1",
IOW, the user hasn't done anything multi-process/inferior related,
then the "INF." part of thread IDs is not shown. E.g,.:
(gdb) info inferiors
Num Description Executable
* 1 process 15275 /home/pedro/gdb/tests/threads
(gdb) info threads
Id Target Id Frame
* 1 Thread 0x7ffff7fc1740 (LWP 15275) "threads" main () at threads.c:40
(gdb) add-inferior
Added inferior 2
(gdb) info threads
Id Target Id Frame
* 1.1 Thread 0x7ffff7fc1740 (LWP 15275) "threads" main () at threads.c:40
(gdb)
No regressions on x86_64 Fedora 20.
gdb/ChangeLog:
2016-01-13 Pedro Alves <palves@redhat.com>
* NEWS: Mention that thread IDs are now per inferior and global
thread IDs.
* Makefile.in (SFILES): Add tid-parse.c.
(COMMON_OBS): Add tid-parse.o.
(HFILES_NO_SRCDIR): Add tid-parse.h.
* ada-tasks.c: Adjust to use ptid_to_global_thread_id.
* breakpoint.c (insert_breakpoint_locations)
(remove_threaded_breakpoints, bpstat_check_breakpoint_conditions)
(print_one_breakpoint_location, set_longjmp_breakpoint)
(check_longjmp_breakpoint_for_call_dummy)
(set_momentary_breakpoint): Adjust to use global IDs.
(find_condition_and_thread, watch_command_1): Use parse_thread_id.
(until_break_command, longjmp_bkpt_dtor)
(breakpoint_re_set_thread, insert_single_step_breakpoint): Adjust
to use global IDs.
* dummy-frame.c (pop_dummy_frame_bpt): Adjust to use
ptid_to_global_thread_id.
* elfread.c (elf_gnu_ifunc_resolver_stop): Likewise.
* gdbthread.h (struct thread_info): Rename field 'num' to
'global_num. Add new fields 'per_inf_num' and 'inf'.
(thread_id_to_pid): Rename thread_id_to_pid to
global_thread_id_to_ptid.
(pid_to_thread_id): Rename to ...
(ptid_to_global_thread_id): ... this.
(valid_thread_id): Rename to ...
(valid_global_thread_id): ... this.
(find_thread_id): Rename to ...
(find_thread_global_id): ... this.
(ALL_THREADS, ALL_THREADS_BY_INFERIOR): Declare.
(print_thread_info): Add comment.
* tid-parse.h: New file.
* tid-parse.c: New file.
* infcmd.c (step_command_fsm_prepare)
(step_command_fsm_should_stop): Adjust to use the global thread
ID.
(until_next_command, until_next_command)
(finish_command_fsm_should_stop): Adjust to use the global thread
ID.
(attach_post_wait): Adjust to check the inferior number too.
* inferior.h (struct inferior) <highest_thread_num>: New field.
* infrun.c (handle_signal_stop)
(insert_exception_resume_breakpoint)
(insert_exception_resume_from_probe): Adjust to use the global
thread ID.
* record-btrace.c (record_btrace_open): Use global thread IDs.
* remote.c (process_initial_stop_replies): Also consider the
inferior number.
* target.c (target_pre_inferior): Clear the inferior's highest
thread num.
* thread.c (clear_thread_inferior_resources): Adjust to use the
global thread ID.
(new_thread): New inferior parameter. Adjust to use it. Set both
the thread's global ID and the thread's per-inferior ID.
(add_thread_silent): Adjust.
(find_thread_global_id): New.
(find_thread_id): Make static. Adjust to rename.
(valid_thread_id): Rename to ...
(valid_global_thread_id): ... this.
(pid_to_thread_id): Rename to ...
(ptid_to_global_thread_id): ... this.
(thread_id_to_pid): Rename to ...
(global_thread_id_to_ptid): ... this. Adjust.
(first_thread_of_process): Adjust.
(do_captured_list_thread_ids): Adjust to use global thread IDs.
(should_print_thread): New function.
(print_thread_info): Rename to ...
(print_thread_info_1): ... this, and add new show_global_ids
parameter. Handle it. Iterate over inferiors.
(print_thread_info): Reimplement as wrapper around
print_thread_info_1.
(show_inferior_qualified_tids): New function.
(print_thread_id): Use it.
(tp_array_compar): Compare inferior numbers too.
(thread_apply_command): Use tid_range_parser.
(do_captured_thread_select): Use parse_thread_id.
(thread_id_make_value): Adjust.
(_initialize_thread): Adjust "info threads" help string.
* varobj.c (struct varobj_root): Update comment.
(varobj_create): Adjust to use global thread IDs.
(value_of_root_1): Adjust to use global_thread_id_to_ptid.
* windows-tdep.c (display_tib): No longer accept an argument.
* cli/cli-utils.c (get_number_trailer): Make extern.
* cli/cli-utils.h (get_number_trailer): Declare.
(get_number_const): Adjust documentation.
* mi/mi-cmd-var.c (mi_cmd_var_update_iter): Adjust to use global
thread IDs.
* mi/mi-interp.c (mi_new_thread, mi_thread_exit)
(mi_on_normal_stop, mi_output_running_pid, mi_on_resume):
* mi/mi-main.c (mi_execute_command, mi_cmd_execute): Likewise.
* guile/scm-breakpoint.c (gdbscm_set_breakpoint_thread_x):
Likewise.
* python/py-breakpoint.c (bppy_set_thread): Likewise.
* python/py-finishbreakpoint.c (bpfinishpy_init): Likewise.
* python/py-infthread.c (thpy_get_num): Add comment and return the
per-inferior thread ID.
(thread_object_getset): Update comment of "num".
gdb/testsuite/ChangeLog:
2016-01-07 Pedro Alves <palves@redhat.com>
* gdb.base/break.exp: Adjust to output changes.
* gdb.base/hbreak2.exp: Likewise.
* gdb.base/sepdebug.exp: Likewise.
* gdb.base/watch_thread_num.exp: Likewise.
* gdb.linespec/keywords.exp: Likewise.
* gdb.multi/info-threads.exp: Likewise.
* gdb.threads/thread-find.exp: Likewise.
* gdb.multi/tids.c: New file.
* gdb.multi/tids.exp: New file.
gdb/doc/ChangeLog:
2016-01-07 Pedro Alves <palves@redhat.com>
* gdb.texinfo (Threads): Document per-inferior thread IDs,
qualified thread IDs, global thread IDs and thread ID lists.
(Set Watchpoints, Thread-Specific Breakpoints): Adjust to refer to
thread IDs.
(Convenience Vars): Document the $_thread convenience variable.
(Ada Tasks): Adjust to refer to thread IDs.
(GDB/MI Async Records, GDB/MI Thread Commands, GDB/MI Ada Tasking
Commands, GDB/MI Variable Objects): Update to mention global
thread IDs.
* guile.texi (Breakpoints In Guile)
<breakpoint-thread/set-breakpoint-thread breakpoint>: Mention
global thread IDs instead of thread IDs.
* python.texi (Threads In Python): Adjust documentation of
InferiorThread.num.
(Breakpoint.thread): Mention global thread IDs instead of thread
IDs.
This patch converts the code base to use the new struct event_location
API being introduced. This patch preserves the current functionality and
adds no new features.
The "big picture" API usage introduced by this patch may be illustrated
with a simple exmaple. Where previously developers would write:
void
my_command (char *arg, int from_tty)
{
create_breakpoint (..., arg, ...);
...
}
one now uses:
void
my_command (char *arg, int from_tty)
{
struct event_locaiton *location;
struct cleanup *back_to;
location = string_to_event_locaiton (&arg, ...);
back_to = make_cleanup_delete_event_location (location);
create_breakpoint (..., location, ...);
do_cleanups (back_to);
}
Linespec-decoding functions (now called location-decoding) such as
decode_line_full no longer skip argument pointers over processed input.
That functionality has been moved into string_to_event_location as
demonstrated above.
gdb/ChangeLog
* ax-gdb.c: Include location.h.
(agent_command_1) Use linespec location instead of address
string.
* break-catch-throw.c: Include location.h.
(re_set_exception_catchpoint): Use linespec locations instead
of address strings.
* breakpoint.c: Include location.h.
(create_overlay_event_breakpoint, create_longjmp_master_breakpoint)
(create_std_terminate_master_breakpoint)
(create_exception_master_breakpoint, update_breakpoints_after_exec):
Use linespec location instead of address string.
(print_breakpoint_location): Use locations and
event_location_to_string.
Print extra_string for pending locations for non-MI streams.
(print_one_breakpoint_location): Use locations and
event_location_to_string.
(init_raw_breakpoint_without_location): Initialize b->location.
(create_thread_event_breakpoint): Use linespec location instead of
address string.
(init_breakpoint_sal): Likewise.
Only save extra_string if it is non-NULL and not the empty string.
Use event_location_to_string instead of `addr_string'.
Constify `p' and `endp'.
Use skip_spaces_const/skip_space_const instead of non-const versions.
Copy the location into the breakpoint.
If LOCATION is NULL, save the breakpoint address as a linespec location
instead of an address string.
(create_breakpoint_sal): Change `addr_string' parameter to a struct
event_location. All uses updated.
(create_breakpoints_sal): Likewise for local variable `addr_string'.
(parse_breakpoint_sals): Use locations instead of address strings.
Remove check for empty linespec with conditional.
Refactor.
(decode_static_tracepoint_spec): Make argument const and update
function.
(create_breakpoint): Change `arg' to a struct event_location and
rename.
Remove `copy_arg' and `addr_start'.
If EXTRA_STRING is empty, set it to NULL.
Don't populate `canonical' for pending breakpoints.
Pass `extra_string' to find_condition_and_thread.
Clear `extra_string' if `rest' was NULL.
Do not error with "garbage after location" if setting a dprintf
breakpoint.
Copy the location into the breakpoint instead of an address string.
(break_command_1): Use string_to_event_location and pass this to
create_breakpoint instead of an address string.
Check against `arg_cp' for a probe linespec.
(dprintf_command): Use string_to_event_location and pass this to
create_breakpoint instead of an address string.
Throw an exception if no format string was specified.
(print_recreate_ranged_breakpoint): Use event_location_to_string
instead of address strings.
(break_range_command, until_break_command)
(init_ada_exception_breakpoint): Use locations instead
of address strings.
(say_where): Print out extra_string for pending locations.
(base_breakpoint_dtor): Delete `location' and `location_range_end' of
the breakpoint.
(base_breakpoint_create_sals_from_location): Use struct event_location
instead of address string.
Remove `addr_start' and `copy_arg' parameters.
(base_breakpoint_decode_location): Use struct event_location instead of
address string.
(bkpt_re_set): Use locations instead of address strings.
Use event_location_empty_p to check for unset location.
(bkpt_print_recreate): Use event_location_to_string instead of
an address string.
Print out extra_string for pending locations.
(bkpt_create_sals_from_location, bkpt_decode_location)
(bkpt_probe_create_sals_from_location): Use struct event_location
instead of address string.
(bkpt_probe_decode_location): Use struct event_location instead of
address string.
(tracepoint_print_recreate): Use event_location_to_string to
recreate the tracepoint.
(tracepoint_create_sals_from_location, tracepoint_decode_location)
(tracepoint_probe_create_sals_from_location)
(tracepoint_probe_decode_location): Use struct event_location
instead of address string.
(dprintf_print_recreate): Use event_location_to_string to recreate
the dprintf.
(dprintf_re_set): Remove check for valid/missing format string.
(strace_marker_create_sals_from_location)
(strace_marker_create_breakpoints_sal, strace_marker_decode_location)
(update_static_tracepoint): Use struct event_location instead of
address string.
(location_to_sals): Likewise.
Pass `extra_string' to find_condition_and_thread.
For newly resolved pending breakpoint locations, clear the location's
string representation.
Assert that the breakpoint's condition string is NULL when
condition_not_parsed.
(breakpoint_re_set_default, create_sals_from_location_default)
(decode_location_default, trace_command, ftrace_command)
(strace_command, create_tracepoint_from_upload): Use locations
instead of address strings.
* breakpoint.h (struct breakpoint_ops) <create_sals_from_location>:
Use struct event_location instead of address string.
Update all uses.
<decode_location>: Likewise.
(struct breakpoint) <addr_string>: Change to struct event_location
and rename `location'.
<addr_string_range_end>: Change to struct event_location and rename
`location_range_end'.
(create_breakpoint): Use struct event_location instead of address
string.
* cli/cli-cmds.c: Include location.h.
(edit_command, list_command): Use locations instead of address strings.
* elfread.c: Include location.h.
(elf_gnu_ifunc_resolver_return_stop): Use event_location_to_string.
* guile/scm-breakpoint.c: Include location.h.
(bpscm_print_breakpoint_smob): Use event_location_to_string.
(gdbscm_register_breakpoint): Use locations instead of address
strings.
* linespec.c: Include location.h.
(struct ls_parser) <stream>: Change to const char *.
(PARSER_STREAM): Update.
(lionespec_lexer_lex_keyword): According to find_condition_and_thread,
keywords must be followed by whitespace.
(canonicalize_linespec): Save a linespec location into `canonical'.
Save a canonical linespec into `canonical'.
(parse_linespec): Change `argptr' to const char * and rename `arg'.
All uses updated.
Update function description.
(linespec_parser_new): Initialize `parser'.
Update initialization of parsing stream.
(event_location_to_sals): New function.
(decode_line_full): Change `argptr' to a struct event_location and
rename it `location'.
Use locations instead of address strings.
Call event_location_to_sals instead of parse_linespec.
(decode_line_1): Likewise.
(decode_line_with_current_source, decode_line_with_last_displayed)
Use locations instead of address strings.
(decode_objc): Likewise.
Change `argptr' to const char * and rename `arg'.
(destroy_linespec_result): Delete the linespec result's location
instead of freeing the address string.
* linespec.h (struct linespec_result) <addr_string>: Change to
struct event_location and rename to ...
<location>: ... this.
(decode_line_1, decode_line_full): Change `argptr' to struct
event_location. All callers updated.
* mi/mi-cmd-break.c: Include language.h, location.h, and linespec.h.
(mi_cmd_break_insert_1): Use locations instead of address strings.
Throw an error if there was "garbage" at the end of the specified
linespec.
* probe.c: Include location.h.
(parse_probes): Change `argptr' to struct event_location.
Use event locations instead of address strings.
* probe.h (parse_probes): Change `argptr' to struct event_location.
* python/py-breakpoint.c: Include location.h.
(bppy_get_location): Constify local variable `str'.
Use event_location_to_string.
(bppy_init): Use locations instead of address strings.
* python/py-finishbreakpoint.c: Include location.h.
(bpfinishpy_init): Remove local variable `addr_str'.
Use locations instead of address strings.
* python/python.c: Include location.h.
(gdbpy_decode_line): Use locations instead of address strings.
* remote.c: Include location.h.
(remote_download_tracepoint): Use locations instead of address
strings.
* spu-tdep.c: Include location.h.
(spu_catch_start): Remove local variable `buf'.
Use locations instead of address strings.
* tracepoint.c: Include location.h.
(scope_info): Use locations instead of address strings.
(encode_source_string): Constify parameter `src'.
* tracepoint.h (encode_source_string): Likewise.
gdb/testsuite/ChangeLog
* gdb.base/dprintf-pending.exp: Update dprintf "without format"
test.
Add tests for missing ",FMT" and ",".
This commit introduces a new inline common function "startswith"
which takes two string arguments and returns nonzero if the first
string starts with the second. It also updates the 295 places
where this logic was written out longhand to use the new function.
gdb/ChangeLog:
* common/common-utils.h (startswith): New inline function.
All places where this logic was used updated to use the above.
The attached patch fixes the SEGV and lets GDB successfully
load all kernel modules installed by default on RHEL 7.
Valgrind on F-21 x86_64 host has shown me more clear what is the problem:
Reading symbols from /home/jkratoch/t/cordic.ko...Reading symbols from
/home/jkratoch/t/cordic.ko.debug...=================================================================
==22763==ERROR: AddressSanitizer: heap-use-after-free on address 0x6120000461c8 at pc 0x150cdbd bp 0x7fffffffc7e0 sp 0x7fffffffc7d0
READ of size 8 at 0x6120000461c8 thread T0
#0 0x150cdbc in ppc64_elf_get_synthetic_symtab /home/jkratoch/redhat/gdb-test-asan/bfd/elf64-ppc.c:3282
#1 0x8c5274 in elf_read_minimal_symbols /home/jkratoch/redhat/gdb-test-asan/gdb/elfread.c:1205
#2 0x8c55e7 in elf_symfile_read /home/jkratoch/redhat/gdb-test-asan/gdb/elfread.c:1268
[...]
0x6120000461c8 is located 264 bytes inside of 288-byte region [0x6120000460c0,0x6120000461e0)
freed by thread T0 here:
#0 0x7ffff715454f in __interceptor_free (/lib64/libasan.so.1+0x5754f)
#1 0xde9cde in xfree common/common-utils.c:98
#2 0x9a04f7 in do_my_cleanups common/cleanups.c:155
#3 0x9a05d3 in do_cleanups common/cleanups.c:177
#4 0x8c538a in elf_read_minimal_symbols /home/jkratoch/redhat/gdb-test-asan/gdb/elfread.c:1229
#5 0x8c55e7 in elf_symfile_read /home/jkratoch/redhat/gdb-test-asan/gdb/elfread.c:1268
[...]
previously allocated by thread T0 here:
#0 0x7ffff71547c7 in malloc (/lib64/libasan.so.1+0x577c7)
#1 0xde9b95 in xmalloc common/common-utils.c:41
#2 0x8c4da2 in elf_read_minimal_symbols /home/jkratoch/redhat/gdb-test-asan/gdb/elfread.c:1147
#3 0x8c55e7 in elf_symfile_read /home/jkratoch/redhat/gdb-test-asan/gdb/elfread.c:1268
[...]
SUMMARY: AddressSanitizer: heap-use-after-free /home/jkratoch/redhat/gdb-test-asan/bfd/elf64-ppc.c:3282 ppc64_elf_get_synthetic_symtab
[...]
==22763==ABORTING
A similar case a few lines later I have fixed in 2010 by:
https://sourceware.org/git/?p=binutils-gdb.git;a=commit;h=3f1eff0a2c7f0e7078f011f55b8e7f710aae0cc2
My testcase does not always reproduce it but at least a bit:
* GDB without ppc64 target (even as a secondary one) is reported as "untested"
* ASAN-built GDB with ppc64 target always crashes (and PASSes with this fix)
* unpatched non-ASAN-built GDB with ppc64 target crashes from commandline
* unpatched non-ASAN-built GDB with ppc64 target PASSes from runtest (?)
gdb/ChangeLog
2015-02-26 Jan Kratochvil <jan.kratochvil@redhat.com>
* elfread.c (elf_read_minimal_symbols): Use bfd_alloc for
bfd_canonicalize_symtab.
gdb/testsuite/ChangeLog
2015-02-26 Jan Kratochvil <jan.kratochvil@redhat.com>
* gdb.arch/cordic.ko.bz2: New file.
* gdb.arch/cordic.ko.debug.bz2: New file.
* gdb.arch/ppc64-symtab-cordic.exp: New file.
In C, we can forward declare static structure instances. That doesn't
work in C++ though. C++ treats these as definitions. So then the
compiler complains about symbol redefinition, like:
src/gdb/elfread.c:1569:29: error: redefinition of ‘const sym_fns elf_sym_fns_lazy_psyms’
src/gdb/elfread.c:53:29: error: ‘const sym_fns elf_sym_fns_lazy_psyms’ previously declared here
The intent of static here is naturally to avoid making these objects
visible outside the compilation unit. The equivalent in C++ would be
to instead define the objects in the anonymous namespace. But given
that it's desirable to leave the codebase compiling as both C and C++
for a while, this just makes the objects extern.
(base_breakpoint_ops is already declared in breakpoint.h, so we can
just remove the forward declare from breakpoint.c)
gdb/ChangeLog:
2015-02-11 Tom Tromey <tromey@redhat.com>
Pedro Alves <palves@redhat.com>
* breakpoint.c (base_breakpoint_ops): Delete.
* dwarf2loc.c (dwarf_expr_ctx_funcs): Make extern.
* elfread.c (elf_sym_fns_gdb_index, elf_sym_fns_lazy_psyms): Make extern.
* guile/guile.c (guile_extension_script_ops, guile_extension_ops): Make extern.
* ppcnbsd-tdep.c (ppcnbsd2_sigtramp): Make extern.
* python/py-arch.c (arch_object_type): Make extern.
* python/py-block.c (block_syms_iterator_object_type): Make extern.
* python/py-bpevent.c (breakpoint_event_object_type): Make extern.
* python/py-cmd.c (cmdpy_object_type): Make extern.
* python/py-continueevent.c (continue_event_object_type)
* python/py-event.h (GDBPY_NEW_EVENT_TYPE): Remove 'qual'
parameter. Update all callers.
* python/py-evtregistry.c (eventregistry_object_type): Make extern.
* python/py-exitedevent.c (exited_event_object_type): Make extern.
* python/py-finishbreakpoint.c (finish_breakpoint_object_type): Make extern.
* python/py-function.c (fnpy_object_type): Make extern.
* python/py-inferior.c (inferior_object_type, membuf_object_type): Make extern.
* python/py-infevents.c (call_pre_event_object_type)
(inferior_call_post_event_object_type).
(memory_changed_event_object_type): Make extern.
* python/py-infthread.c (thread_object_type): Make extern.
* python/py-lazy-string.c (lazy_string_object_type): Make extern.
* python/py-linetable.c (linetable_entry_object_type)
(linetable_object_type, ltpy_iterator_object_type): Make extern.
* python/py-newobjfileevent.c (new_objfile_event_object_type)
(clear_objfiles_event_object_type): Make extern.
* python/py-objfile.c (objfile_object_type): Make extern.
* python/py-param.c (parmpy_object_type): Make extern.
* python/py-progspace.c (pspace_object_type): Make extern.
* python/py-signalevent.c (signal_event_object_type): Make extern.
* python/py-symtab.c (symtab_object_type, sal_object_type): Make extern.
* python/py-type.c (type_object_type, field_object_type)
(type_iterator_object_type): Make extern.
* python/python.c (python_extension_script_ops)
(python_extension_ops): Make extern.
* stap-probe.c (stap_probe_ops): Make extern.
I stumbled upon a few comments that I think are outdated.
Comment for elfread.c (elf_symfile_init): As far as history goes in git,
I don't see anything related to that.
Comment for elfread.c (elf_symfile_read): References a parameter that was
removed in 1999.
Comment for struct sym_fns/sym_offsets: References a parameter that was
changed in 1999.
gdb/ChangeLog:
* elfread.c (elf_symfile_init): Remove stale comment.
(elf_symfile_read): Same.
* symfile.h (struct sym_fns): Same.
1. Background information
The MIPS architecture, as originally designed and implemented in
mid-1980s has a uniform instruction word size that is 4 bytes, naturally
aligned. As such all MIPS instructions are located at addresses that
have their bits #1 and #0 set to zeroes, and any attempt to execute an
instruction from an address that has any of the two bits set to one
causes an address error exception. This may for example happen when a
jump-register instruction is executed whose register value used as the
jump target has any of these bits set.
Then in mid 1990s LSI sought a way to improve code density for their
TinyRISC family of MIPS cores and invented an alternatively encoded
instruction set in a joint effort with MIPS Technologies (then a
subsidiary of SGI). The new instruction set has been named the MIPS16
ASE (Application-Specific Extension) and uses a variable instruction
word size, which is 2 bytes (as the name of the ASE suggests) for most,
but there are a couple of exceptions that take 4 bytes, and then most of
the 2-byte instructions can be treated with a 2-byte extension prefix to
expand the range of the immediate operands used.
As a result instructions are no longer 4-byte aligned, instead they are
aligned to a multiple of 2. That left the bit #0 still unused for code
references, be it for the standard MIPS (i.e. as originally invented) or
for the MIPS16 instruction set, and based on that observation a clever
trick was invented that on one hand allowed the processor to be
seamlessly switched between the two instruction sets at any time at the
run time while on the other avoided the introduction of any special
control register to do that.
So it is the bit #0 of the instruction address that was chosen as the
selector and named the ISA bit. Any instruction executed at an even
address is interpreted as a standard MIPS instruction (the address still
has to have its bit #1 clear), any instruction executed at an odd
address is interpreted as a MIPS16 instruction.
To switch between modes ordinary jump instructions are used, such as
used for function calls and returns, specifically the bit #0 of the
source register used in jump-register instructions selects the execution
(ISA) mode for the following piece of code to be interpreted in.
Additionally new jump-immediate instructions were added that flipped the
ISA bit to select the opposite mode upon execution. They were
considered necessary to avoid the need to make register jumps in all
cases as the original jump-immediate instructions provided no way to
change the bit #0 at all.
This was all important for cases where standard MIPS and MIPS16 code had
to be mixed, either for compatibility with the existing binary code base
or to access resources not reachable from MIPS16 code (the MIPS16
instruction set only provides access to general-purpose registers, and
not for example floating-point unit registers or privileged coprocessor
0 registers) -- pieces of code in the opposite mode can be executed as
ordinary subroutine calls.
A similar approach has been more recently adopted for the MIPS16
replacement instruction set defined as the so called microMIPS ASE.
This is another instruction set encoding introduced to the MIPS
architecture. Just like the MIPS16 ASE, the microMIPS instruction set
uses a variable-length encoding, where each instruction takes a multiple
of 2 bytes. The ISA bit has been reused and for microMIPS-capable
processors selects between the standard MIPS and the microMIPS mode
instead.
2. Statement of the problem
To put it shortly, MIPS16 and microMIPS code pointers used by GDB are
different to these observed at the run time. This results in the same
expressions being evaluated producing different results in GDB and in
the program being debugged. Obviously it's the results obtained at the
run time that are correct (they define how the program behaves) and
therefore by definition the results obtained in GDB are incorrect.
A bit longer description will record that obviously at the run time the
ISA bit has to be set correctly (refer to background information above
if unsure why so) or the program will not run as expected. This is
recorded in all the executable file structures used at the run time: the
dynamic symbol table (but not always the static one!), the GOT, and
obviously in all the addresses embedded in code or data of the program
itself, calculated by applying the appropriate relocations at the static
link time.
While a program is being processed by GDB, the ISA bit is stripped off
from any code addresses, presumably to make them the same as the
respective raw memory byte address used by the processor to access the
instruction in the instruction fetch access cycle. This stripping is
actually performed outside GDB proper, in BFD, specifically
_bfd_mips_elf_symbol_processing (elfxx-mips.c, see the piece of code at
the very bottom of that function, starting with an: "If this is an
odd-valued function symbol, assume it's a MIPS16 or microMIPS one."
comment).
This function is also responsible for symbol table dumps made by
`objdump' too, so you'll never see the ISA bit reported there by that
tool, you need to use `readelf'.
This is however unlike what is ever done at the run time, the ISA bit
once present is never stripped off, for example a cast like this:
(short *) main
will not strip the ISA bit off and if the resulting pointer is intended
to be used to access instructions as data, for example for software
instruction decoding (like for fault recovery or emulation in a signal
handler) or for self-modifying code then the bit still has to be
stripped off by an explicit AND operation.
This is probably best illustrated with a simple real program example.
Let's consider the following simple program:
$ cat foobar.c
int __attribute__ ((mips16)) foo (void)
{
return 1;
}
int __attribute__ ((mips16)) bar (void)
{
return 2;
}
int __attribute__ ((nomips16)) foo32 (void)
{
return 3;
}
int (*foo32p) (void) = foo32;
int (*foop) (void) = foo;
int fooi = (int) foo;
int
main (void)
{
return foop ();
}
$
This is plain C with no odd tricks, except from the instruction mode
attributes. They are not necessary to trigger this problem, I just put
them here so that the program can be contained in a single source file
and to make it obvious which function is MIPS16 code and which is not.
Let's try it with Linux, so that everyone can repeat this experiment:
$ mips-linux-gnu-gcc -mips16 -g -O2 -o foobar foobar.c
$
Let's have a look at some interesting symbols:
$ mips-linux-gnu-readelf -s foobar | egrep 'table|foo|bar'
Symbol table '.dynsym' contains 7 entries:
Symbol table '.symtab' contains 95 entries:
55: 00000000 0 FILE LOCAL DEFAULT ABS foobar.c
66: 0040068c 4 FUNC GLOBAL DEFAULT [MIPS16] 12 bar
68: 00410848 4 OBJECT GLOBAL DEFAULT 21 foo32p
70: 00410844 4 OBJECT GLOBAL DEFAULT 21 foop
78: 00400684 8 FUNC GLOBAL DEFAULT 12 foo32
80: 00400680 4 FUNC GLOBAL DEFAULT [MIPS16] 12 foo
88: 00410840 4 OBJECT GLOBAL DEFAULT 21 fooi
$
Hmm, no sight of the ISA bit, but notice how foo and bar (but not
foo32!) have been marked as MIPS16 functions (ELF symbol structure's
`st_other' field is used for that).
So let's try to run and poke at this program with GDB. I'll be using a
native system for simplicity (I'll be using ellipses here and there to
remove unrelated clutter):
$ ./foobar
$ echo $?
1
$
So far, so good.
$ gdb ./foobar
[...]
(gdb) break main
Breakpoint 1 at 0x400490: file foobar.c, line 23.
(gdb) run
Starting program: .../foobar
Breakpoint 1, main () at foobar.c:23
23 return foop ();
(gdb)
Yay, it worked! OK, so let's poke at it:
(gdb) print main
$1 = {int (void)} 0x400490 <main>
(gdb) print foo32
$2 = {int (void)} 0x400684 <foo32>
(gdb) print foo32p
$3 = (int (*)(void)) 0x400684 <foo32>
(gdb) print bar
$4 = {int (void)} 0x40068c <bar>
(gdb) print foo
$5 = {int (void)} 0x400680 <foo>
(gdb) print foop
$6 = (int (*)(void)) 0x400681 <foo>
(gdb)
A-ha! Here's the difference and finally the ISA bit!
(gdb) print /x fooi
$7 = 0x400681
(gdb) p/x $pc
p/x $pc
$8 = 0x400491
(gdb)
And here as well...
(gdb) advance foo
foo () at foobar.c:4
4 }
(gdb) disassemble
Dump of assembler code for function foo:
0x00400680 <+0>: jr ra
0x00400682 <+2>: li v0,1
End of assembler dump.
(gdb) finish
Run till exit from #0 foo () at foobar.c:4
main () at foobar.c:24
24 }
Value returned is $9 = 1
(gdb) continue
Continuing.
[Inferior 1 (process 14103) exited with code 01]
(gdb)
So let's be a bit inquisitive...
(gdb) run
Starting program: .../foobar
Breakpoint 1, main () at foobar.c:23
23 return foop ();
(gdb)
Actually we do not like to run foo here at all. Let's run bar instead!
(gdb) set foop = bar
(gdb) print foop
$10 = (int (*)(void)) 0x40068c <bar>
(gdb)
Hmm, no ISA bit. Is it going to work?
(gdb) advance bar
bar () at foobar.c:9
9 }
(gdb) p/x $pc
$11 = 0x40068c
(gdb) disassemble
Dump of assembler code for function bar:
=> 0x0040068c <+0>: jr ra
0x0040068e <+2>: li v0,2
End of assembler dump.
(gdb) finish
Run till exit from #0 bar () at foobar.c:9
Program received signal SIGILL, Illegal instruction.
bar () at foobar.c:9
9 }
(gdb)
Oops!
(gdb) p/x $pc
$12 = 0x40068c
(gdb)
We're still there!
(gdb) continue
Continuing.
Program terminated with signal SIGILL, Illegal instruction.
The program no longer exists.
(gdb)
So let's try something else:
(gdb) run
Starting program: .../foobar
Breakpoint 1, main () at foobar.c:23
23 return foop ();
(gdb) set foop = foo
(gdb) advance foo
foo () at foobar.c:4
4 }
(gdb) disassemble
Dump of assembler code for function foo:
=> 0x00400680 <+0>: jr ra
0x00400682 <+2>: li v0,1
End of assembler dump.
(gdb) finish
Run till exit from #0 foo () at foobar.c:4
Program received signal SIGILL, Illegal instruction.
foo () at foobar.c:4
4 }
(gdb) continue
Continuing.
Program terminated with signal SIGILL, Illegal instruction.
The program no longer exists.
(gdb)
The same problem!
(gdb) run
Starting program:
/net/build2-lucid-cs/scratch/macro/mips-linux-fsf-gcc/isa-bit/foobar
Breakpoint 1, main () at foobar.c:23
23 return foop ();
(gdb) set foop = foo32
(gdb) advance foo32
foo32 () at foobar.c:14
14 }
(gdb) disassemble
Dump of assembler code for function foo32:
=> 0x00400684 <+0>: jr ra
0x00400688 <+4>: li v0,3
End of assembler dump.
(gdb) finish
Run till exit from #0 foo32 () at foobar.c:14
main () at foobar.c:24
24 }
Value returned is $14 = 3
(gdb) continue
Continuing.
[Inferior 1 (process 14113) exited with code 03]
(gdb)
That did work though, so it's the ISA bit only!
(gdb) quit
Enough!
That's the tip of the iceberg only though. So let's rebuild the
executable with some dynamic symbols:
$ mips-linux-gnu-gcc -mips16 -Wl,--export-dynamic -g -O2 -o foobar-dyn foobar.c
$ mips-linux-gnu-readelf -s foobar-dyn | egrep 'table|foo|bar'
Symbol table '.dynsym' contains 32 entries:
6: 004009cd 4 FUNC GLOBAL DEFAULT 12 bar
8: 00410b88 4 OBJECT GLOBAL DEFAULT 21 foo32p
9: 00410b84 4 OBJECT GLOBAL DEFAULT 21 foop
15: 004009c4 8 FUNC GLOBAL DEFAULT 12 foo32
17: 004009c1 4 FUNC GLOBAL DEFAULT 12 foo
25: 00410b80 4 OBJECT GLOBAL DEFAULT 21 fooi
Symbol table '.symtab' contains 95 entries:
55: 00000000 0 FILE LOCAL DEFAULT ABS foobar.c
69: 004009cd 4 FUNC GLOBAL DEFAULT 12 bar
71: 00410b88 4 OBJECT GLOBAL DEFAULT 21 foo32p
72: 00410b84 4 OBJECT GLOBAL DEFAULT 21 foop
79: 004009c4 8 FUNC GLOBAL DEFAULT 12 foo32
81: 004009c1 4 FUNC GLOBAL DEFAULT 12 foo
89: 00410b80 4 OBJECT GLOBAL DEFAULT 21 fooi
$
OK, now the ISA bit is there for a change, but the MIPS16 `st_other'
attribute gone, hmm... What does `objdump' do then:
$ mips-linux-gnu-objdump -Tt foobar-dyn | egrep 'SYMBOL|foo|bar'
foobar-dyn: file format elf32-tradbigmips
SYMBOL TABLE:
00000000 l df *ABS* 00000000 foobar.c
004009cc g F .text 00000004 0xf0 bar
00410b88 g O .data 00000004 foo32p
00410b84 g O .data 00000004 foop
004009c4 g F .text 00000008 foo32
004009c0 g F .text 00000004 0xf0 foo
00410b80 g O .data 00000004 fooi
DYNAMIC SYMBOL TABLE:
004009cc g DF .text 00000004 Base 0xf0 bar
00410b88 g DO .data 00000004 Base foo32p
00410b84 g DO .data 00000004 Base foop
004009c4 g DF .text 00000008 Base foo32
004009c0 g DF .text 00000004 Base 0xf0 foo
00410b80 g DO .data 00000004 Base fooi
$
Hmm, the attribute (0xf0, printed raw) is back, and the ISA bit gone
again.
Let's have a look at some DWARF-2 records GDB uses (I'll be stripping
off a lot here for brevity) -- debug info:
$ mips-linux-gnu-readelf -wi foobar
Contents of the .debug_info section:
[...]
Compilation Unit @ offset 0x88:
Length: 0xbb (32-bit)
Version: 4
Abbrev Offset: 62
Pointer Size: 4
<0><93>: Abbrev Number: 1 (DW_TAG_compile_unit)
<94> DW_AT_producer : (indirect string, offset: 0x19e): GNU C 4.8.0 20120513 (experimental) -meb -mips16 -march=mips32r2 -mhard-float -mllsc -mplt -mno-synci -mno-shared -mabi=32 -g -O2
<98> DW_AT_language : 1 (ANSI C)
<99> DW_AT_name : (indirect string, offset: 0x190): foobar.c
<9d> DW_AT_comp_dir : (indirect string, offset: 0x225): [...]
<a1> DW_AT_ranges : 0x0
<a5> DW_AT_low_pc : 0x0
<a9> DW_AT_stmt_list : 0x27
<1><ad>: Abbrev Number: 2 (DW_TAG_subprogram)
<ae> DW_AT_external : 1
<ae> DW_AT_name : foo
<b2> DW_AT_decl_file : 1
<b3> DW_AT_decl_line : 1
<b4> DW_AT_prototyped : 1
<b4> DW_AT_type : <0xc2>
<b8> DW_AT_low_pc : 0x400680
<bc> DW_AT_high_pc : 0x400684
<c0> DW_AT_frame_base : 1 byte block: 9c (DW_OP_call_frame_cfa)
<c2> DW_AT_GNU_all_call_sites: 1
<1><c2>: Abbrev Number: 3 (DW_TAG_base_type)
<c3> DW_AT_byte_size : 4
<c4> DW_AT_encoding : 5 (signed)
<c5> DW_AT_name : int
<1><c9>: Abbrev Number: 4 (DW_TAG_subprogram)
<ca> DW_AT_external : 1
<ca> DW_AT_name : (indirect string, offset: 0x18a): foo32
<ce> DW_AT_decl_file : 1
<cf> DW_AT_decl_line : 11
<d0> DW_AT_prototyped : 1
<d0> DW_AT_type : <0xc2>
<d4> DW_AT_low_pc : 0x400684
<d8> DW_AT_high_pc : 0x40068c
<dc> DW_AT_frame_base : 1 byte block: 9c (DW_OP_call_frame_cfa)
<de> DW_AT_GNU_all_call_sites: 1
<1><de>: Abbrev Number: 2 (DW_TAG_subprogram)
<df> DW_AT_external : 1
<df> DW_AT_name : bar
<e3> DW_AT_decl_file : 1
<e4> DW_AT_decl_line : 6
<e5> DW_AT_prototyped : 1
<e5> DW_AT_type : <0xc2>
<e9> DW_AT_low_pc : 0x40068c
<ed> DW_AT_high_pc : 0x400690
<f1> DW_AT_frame_base : 1 byte block: 9c (DW_OP_call_frame_cfa)
<f3> DW_AT_GNU_all_call_sites: 1
<1><f3>: Abbrev Number: 5 (DW_TAG_subprogram)
<f4> DW_AT_external : 1
<f4> DW_AT_name : (indirect string, offset: 0x199): main
<f8> DW_AT_decl_file : 1
<f9> DW_AT_decl_line : 21
<fa> DW_AT_prototyped : 1
<fa> DW_AT_type : <0xc2>
<fe> DW_AT_low_pc : 0x400490
<102> DW_AT_high_pc : 0x4004a4
<106> DW_AT_frame_base : 1 byte block: 9c (DW_OP_call_frame_cfa)
<108> DW_AT_GNU_all_tail_call_sites: 1
[...]
$
-- no sign of the ISA bit anywhere -- frame info:
$ mips-linux-gnu-readelf -wf foobar
[...]
Contents of the .debug_frame section:
00000000 0000000c ffffffff CIE
Version: 1
Augmentation: ""
Code alignment factor: 1
Data alignment factor: -4
Return address column: 31
DW_CFA_def_cfa_register: r29
DW_CFA_nop
00000010 0000000c 00000000 FDE cie=00000000 pc=00400680..00400684
00000020 0000000c 00000000 FDE cie=00000000 pc=00400684..0040068c
00000030 0000000c 00000000 FDE cie=00000000 pc=0040068c..00400690
00000040 00000018 00000000 FDE cie=00000000 pc=00400490..004004a4
DW_CFA_advance_loc: 6 to 00400496
DW_CFA_def_cfa_offset: 32
DW_CFA_offset: r31 at cfa-4
DW_CFA_advance_loc: 6 to 0040049c
DW_CFA_restore: r31
DW_CFA_def_cfa_offset: 0
DW_CFA_nop
DW_CFA_nop
DW_CFA_nop
[...]
$
-- no sign of the ISA bit anywhere -- range info (GDB doesn't use arange):
$ mips-linux-gnu-readelf -wR foobar
Contents of the .debug_ranges section:
Offset Begin End
00000000 00400680 00400690
00000000 00400490 004004a4
00000000 <End of list>
$
-- no sign of the ISA bit anywhere -- line info:
$ mips-linux-gnu-readelf -wl foobar
Raw dump of debug contents of section .debug_line:
[...]
Offset: 0x27
Length: 78
DWARF Version: 2
Prologue Length: 31
Minimum Instruction Length: 1
Initial value of 'is_stmt': 1
Line Base: -5
Line Range: 14
Opcode Base: 13
Opcodes:
Opcode 1 has 0 args
Opcode 2 has 1 args
Opcode 3 has 1 args
Opcode 4 has 1 args
Opcode 5 has 1 args
Opcode 6 has 0 args
Opcode 7 has 0 args
Opcode 8 has 0 args
Opcode 9 has 1 args
Opcode 10 has 0 args
Opcode 11 has 0 args
Opcode 12 has 1 args
The Directory Table is empty.
The File Name Table:
Entry Dir Time Size Name
1 0 0 0 foobar.c
Line Number Statements:
Extended opcode 2: set Address to 0x400681
Special opcode 6: advance Address by 0 to 0x400681 and Line by 1 to 2
Special opcode 7: advance Address by 0 to 0x400681 and Line by 2 to 4
Special opcode 55: advance Address by 3 to 0x400684 and Line by 8 to 12
Special opcode 7: advance Address by 0 to 0x400684 and Line by 2 to 14
Advance Line by -7 to 7
Special opcode 131: advance Address by 9 to 0x40068d and Line by 0 to 7
Special opcode 7: advance Address by 0 to 0x40068d and Line by 2 to 9
Advance PC by 3 to 0x400690
Extended opcode 1: End of Sequence
Extended opcode 2: set Address to 0x400491
Advance Line by 21 to 22
Copy
Special opcode 6: advance Address by 0 to 0x400491 and Line by 1 to 23
Special opcode 60: advance Address by 4 to 0x400495 and Line by -1 to 22
Special opcode 34: advance Address by 2 to 0x400497 and Line by 1 to 23
Special opcode 62: advance Address by 4 to 0x40049b and Line by 1 to 24
Special opcode 32: advance Address by 2 to 0x40049d and Line by -1 to 23
Special opcode 6: advance Address by 0 to 0x40049d and Line by 1 to 24
Advance PC by 7 to 0x4004a4
Extended opcode 1: End of Sequence
[...]
-- a-ha, the ISA bit is there! However it's not always right for some
reason, I don't have a small test case to show it, but here's an excerpt
from MIPS16 libc, a prologue of a function:
00019630 <__libc_init_first>:
19630: e8a0 jrc ra
19632: 6500 nop
00019634 <_init>:
19634: f000 6a11 li v0,17
19638: f7d8 0b08 la v1,15e00 <_DYNAMIC+0x15c54>
1963c: f400 3240 sll v0,16
19640: e269 addu v0,v1
19642: 659a move gp,v0
19644: 64f6 save 48,ra,s0-s1
19646: 671c move s0,gp
19648: d204 sw v0,16(sp)
1964a: f352 984c lw v0,-27828(s0)
1964e: 6724 move s1,a0
and the corresponding DWARF-2 line info:
Line Number Statements:
Extended opcode 2: set Address to 0x19631
Advance Line by 44 to 45
Copy
Special opcode 8: advance Address by 0 to 0x19631 and Line by 3 to 48
Special opcode 66: advance Address by 4 to 0x19635 and Line by 5 to 53
Advance PC by constant 17 to 0x19646
Special opcode 25: advance Address by 1 to 0x19647 and Line by 6 to 59
Advance Line by -6 to 53
Special opcode 33: advance Address by 2 to 0x19649 and Line by 0 to 53
Special opcode 39: advance Address by 2 to 0x1964b and Line by 6 to 59
Advance Line by -6 to 53
Special opcode 61: advance Address by 4 to 0x1964f and Line by 0 to 53
-- see that "Advance PC by constant 17" there? It clears the ISA bit,
however code at 0x19646 is not standard MIPS code at all. For some
reason the constant is always 17, I've never seen DW_LNS_const_add_pc
used with any other value -- is that a binutils bug or what?
3. Solution:
I think we should retain the value of the ISA bit in code references,
that is effectively treat them as cookies as they indeed are (although
trivially calculated) rather than raw memory byte addresses.
In a perfect world both the static symbol table and the respective
DWARF-2 records should be fixed to include the ISA bit in all the cases.
I think however that this is infeasible.
All the uses of `_bfd_mips_elf_symbol_processing' can not necessarily be
tracked down. This function is used by `elf_slurp_symbol_table' that in
turn is used by `bfd_canonicalize_symtab' and
`bfd_canonicalize_dynamic_symtab', which are public interfaces.
Similarly DWARF-2 records are used outside GDB, one notable if a bit
questionable is the exception unwinder (libgcc/unwind-dw2.c) -- I have
identified at least bits in `execute_cfa_program' and
`uw_frame_state_for', both around the calls to `_Unwind_IsSignalFrame',
that would need an update as they effectively flip the ISA bit freely;
see also the comment about MASK_RETURN_ADDR in gcc/config/mips/mips.h.
But there may be more places. Any change in how DWARF-2 records are
produced would require an update there and would cause compatibility
problems with libgcc.a binaries already distributed; given that this is
a static library a complex change involving function renames would
likely be required.
I propose therefore to accept the existing inconsistencies and deal with
them entirely within GDB. I have figured out that the ISA bit lost in
various places can still be recovered as long as we have symbol
information -- that'll have the `st_other' attribute correctly set to
one of standard MIPS/MIPS16/microMIPS encoding.
Here's the resulting change. It adds a couple of new `gdbarch' hooks,
one to update symbol information with the ISA bit lost in
`_bfd_mips_elf_symbol_processing', and two other ones to adjust DWARF-2
records as they're processed. The ISA bit is set in each address
handled according to information retrieved from the symbol table for the
symbol spanning the address if any; limits are adjusted based on the
address they point to related to the respective base address.
Additionally minimal symbol information has to be adjusted accordingly
in its gdbarch hook.
With these changes in place some complications with ISA bit juggling in
the PC that never fully worked can be removed from the MIPS backend.
Conversely, the generic dynamic linker event special breakpoint symbol
handler has to be updated to call the minimal symbol gdbarch hook to
record that the symbol is a MIPS16 or microMIPS address if applicable or
the breakpoint will be set at the wrong address and either fail to work
or cause SIGTRAPs (this is because the symbol is handled early on and
bypasses regular symbol processing).
4. Results obtained
The change fixes the example above -- to repeat only the crucial steps:
(gdb) break main
Breakpoint 1 at 0x400491: file foobar.c, line 23.
(gdb) run
Starting program: .../foobar
Breakpoint 1, main () at foobar.c:23
23 return foop ();
(gdb) print foo
$1 = {int (void)} 0x400681 <foo>
(gdb) set foop = bar
(gdb) advance bar
bar () at foobar.c:9
9 }
(gdb) disassemble
Dump of assembler code for function bar:
=> 0x0040068d <+0>: jr ra
0x0040068f <+2>: li v0,2
End of assembler dump.
(gdb) finish
Run till exit from #0 bar () at foobar.c:9
main () at foobar.c:24
24 }
Value returned is $2 = 2
(gdb) continue
Continuing.
[Inferior 1 (process 14128) exited with code 02]
(gdb)
-- excellent!
The change removes about 90 failures per MIPS16 multilib in mips-sde-elf
testing too, results for MIPS16 are now similar to that for standard
MIPS; microMIPS results are a bit worse because of host-I/O problems in
QEMU used instead of MIPSsim for microMIPS testing only:
=== gdb Summary ===
# of expected passes 14299
# of unexpected failures 187
# of expected failures 56
# of known failures 58
# of unresolved testcases 11
# of untested testcases 52
# of unsupported tests 174
MIPS16:
=== gdb Summary ===
# of expected passes 14298
# of unexpected failures 187
# of unexpected successes 2
# of expected failures 54
# of known failures 58
# of unresolved testcases 12
# of untested testcases 52
# of unsupported tests 174
microMIPS:
=== gdb Summary ===
# of expected passes 14149
# of unexpected failures 201
# of unexpected successes 2
# of expected failures 54
# of known failures 58
# of unresolved testcases 7
# of untested testcases 53
# of unsupported tests 175
2014-12-12 Maciej W. Rozycki <macro@codesourcery.com>
Maciej W. Rozycki <macro@mips.com>
Pedro Alves <pedro@codesourcery.com>
gdb/
* gdbarch.sh (elf_make_msymbol_special): Change type to `F',
remove `predefault' and `invalid_p' initializers.
(make_symbol_special): New architecture method.
(adjust_dwarf2_addr, adjust_dwarf2_line): Likewise.
(objfile, symbol): New declarations.
* arch-utils.h (default_elf_make_msymbol_special): Remove
prototype.
(default_make_symbol_special): New prototype.
(default_adjust_dwarf2_addr): Likewise.
(default_adjust_dwarf2_line): Likewise.
* mips-tdep.h (mips_unmake_compact_addr): New prototype.
* arch-utils.c (default_elf_make_msymbol_special): Remove
function.
(default_make_symbol_special): New function.
(default_adjust_dwarf2_addr): Likewise.
(default_adjust_dwarf2_line): Likewise.
* dwarf2-frame.c (decode_frame_entry_1): Call
`gdbarch_adjust_dwarf2_addr'.
* dwarf2loc.c (dwarf2_find_location_expression): Likewise.
* dwarf2read.c (create_addrmap_from_index): Likewise.
(process_psymtab_comp_unit_reader): Likewise.
(add_partial_symbol): Likewise.
(add_partial_subprogram): Likewise.
(process_full_comp_unit): Likewise.
(read_file_scope): Likewise.
(read_func_scope): Likewise. Call `gdbarch_make_symbol_special'.
(read_lexical_block_scope): Call `gdbarch_adjust_dwarf2_addr'.
(read_call_site_scope): Likewise.
(dwarf2_ranges_read): Likewise.
(dwarf2_record_block_ranges): Likewise.
(read_attribute_value): Likewise.
(dwarf_decode_lines_1): Call `gdbarch_adjust_dwarf2_line'.
(new_symbol_full): Call `gdbarch_adjust_dwarf2_addr'.
* elfread.c (elf_symtab_read): Don't call
`gdbarch_elf_make_msymbol_special' if unset.
* mips-linux-tdep.c (micromips_linux_sigframe_validate): Strip
the ISA bit from the PC.
* mips-tdep.c (mips_unmake_compact_addr): New function.
(mips_elf_make_msymbol_special): Set the ISA bit in the symbol's
address appropriately.
(mips_make_symbol_special): New function.
(mips_pc_is_mips): Set the ISA bit before symbol lookup.
(mips_pc_is_mips16): Likewise.
(mips_pc_is_micromips): Likewise.
(mips_pc_isa): Likewise.
(mips_adjust_dwarf2_addr): New function.
(mips_adjust_dwarf2_line): Likewise.
(mips_read_pc, mips_unwind_pc): Keep the ISA bit.
(mips_addr_bits_remove): Likewise.
(mips_skip_trampoline_code): Likewise.
(mips_write_pc): Don't set the ISA bit.
(mips_eabi_push_dummy_call): Likewise.
(mips_o64_push_dummy_call): Likewise.
(mips_gdbarch_init): Install `mips_make_symbol_special',
`mips_adjust_dwarf2_addr' and `mips_adjust_dwarf2_line' gdbarch
handlers.
* solib.c (gdb_bfd_lookup_symbol_from_symtab): Get
target-specific symbol address adjustments.
* gdbarch.h: Regenerate.
* gdbarch.c: Regenerate.
2014-12-12 Maciej W. Rozycki <macro@codesourcery.com>
gdb/testsuite/
* gdb.base/func-ptrs.c: New file.
* gdb.base/func-ptrs.exp: New file.
In installing minimal symbols for ELF shared library trampolines
we "forget" to make individual symbols special where required. This
leads to problems on the MIPS target using microMIPS SVR4 lazy stubs.
Lacking the special annotation these stubs are treated as standard
MIPS code and this makes GDB insert the wrong software breakpoint
instruction, breaking e.g. single-stepping through these stubs. This
is not a very frequent scenario as microMIPS SVR4 lazy stubs are
typically only used in shared libraries with the main executable
using PLT, handled elsewhere. Still it triggers e.g. when a software
watchpoint has been installed. The symptom is SIGILL or the program
going astray, depending on the endianness. Disassembly of these stubs
is also wrong.
* elfread.c (elf_symtab_read): Also mark solib trampoline minimal
symbols special.
This patch moves the probe data from the objfile to the per-BFD
object. This lets the probes be shared between different inferiors
(and different objfiles when dlmopen is in use, should gdb ever handle
that).
2014-03-03 Tom Tromey <tromey@redhat.com>
* elfread.c (probe_key): Change to bfd_data.
(elf_get_probes, probe_key_free, _initialize_elfread): Probes are
now per-BFD, not per-objfile.
* stap-probe.c (stap_probe_destroy): Update comment.
(handle_stap_probe): Allocate on the per-BFD obstack.
This changes the probes to be independent of the program space.
After this, when a probe's address is needed, it is determined by
applying offsets at the point of use.
This introduces a bound_probe object, similar to bound minimal
symbols. Objects of this type are used when it's necessary to pass a
probe and its corresponding objfile.
This removes the backlink from probe to objfile, which was primarily
used to fetch the architecture to use.
This adds a get_probe_address function which calls a probe method to
compute the probe's relocated address. Similarly, it adds an objfile
parameter to the semaphore methods so they can do the relocation
properly as well.
2014-03-03 Tom Tromey <tromey@redhat.com>
* break-catch-throw.c (fetch_probe_arguments): Use bound probes.
* breakpoint.c (create_longjmp_master_breakpoint): Use
get_probe_address.
(add_location_to_breakpoint, bkpt_probe_insert_location)
(bkpt_probe_remove_location): Update.
* breakpoint.h (struct bp_location) <probe>: Now a bound_probe.
* elfread.c (elf_symfile_relocate_probe): Remove.
(elf_probe_fns): Update.
(insert_exception_resume_breakpoint): Change type of "probe"
parameter to bound_probe.
(check_exception_resume): Update.
* objfiles.c (objfile_relocate1): Don't relocate probes.
* probe.c (bound_probe_s): New typedef.
(parse_probes): Use get_probe_address. Set sal's objfile.
(find_probe_by_pc): Return a bound_probe.
(collect_probes): Return a VEC(bound_probe_s).
(compare_probes): Update.
(gen_ui_out_table_header_info): Change type of "probes"
parameter. Update.
(info_probes_for_ops): Update.
(get_probe_address): New function.
(probe_safe_evaluate_at_pc): Update.
* probe.h (struct probe_ops) <get_probe_address>: New field.
<set_semaphore, clear_semaphore>: Add objfile parameter.
(struct probe) <objfile>: Remove field.
<arch>: New field.
<address>: Update comment.
(struct bound_probe): New.
(find_probe_by_pc): Return a bound_probe.
(get_probe_address): Declare.
* solib-svr4.c (struct probe_and_action) <address>: New field.
(hash_probe_and_action, equal_probe_and_action): Update.
(register_solib_event_probe): Add address parameter.
(solib_event_probe_at): Update.
(svr4_create_probe_breakpoints): Add objfile parameter. Use
get_probe_address.
* stap-probe.c (struct stap_probe) <sem_addr>: Update comment.
(stap_get_probe_address): New function.
(stap_can_evaluate_probe_arguments, compute_probe_arg)
(compile_probe_arg): Update.
(stap_set_semaphore, stap_clear_semaphore): Compute semaphore's
address.
(handle_stap_probe): Don't relocate the probe.
(stap_relocate): Remove.
(stap_gen_info_probes_table_values): Update.
(stap_probe_ops): Remove stap_relocate.
* symfile-debug.c (debug_sym_relocate_probe): Remove.
(debug_sym_probe_fns): Update.
* symfile.h (struct sym_probe_fns) <sym_relocate_probe>: Remove.
* symtab.c (init_sal): Use memset.
* symtab.h (struct symtab_and_line) <objfile>: New field.
* tracepoint.c (start_tracing, stop_tracing): Update.
If minimal symbols have already been read into a per-BFD object, then
a symbol reader can skip re-reading them. This changes the ELF reader
to do so.
We only skip the work if the file is ELF+DWARF. If it has stabs or
mdebug sections, then I think extra information is computed during the
minsym creation pass; and so we must still repeat it. Eventually even
this will go away, once all symbol types have switched to being
progspace-independent. In the meantime this has no negative effect --
it is just a missing optimization for a small set of users.
This change also required a somewhat non-obvious change to the OBJSTAT
accounting code. If a symbol reader skips re-reading minimal symbols,
then the corresponding OBJSTAT will not be updated. This leads to a
test failure in gdb.base/maint.exp.
To fix this, I've moved the needed stat field out of objfile and into
the per-BFD object.
2014-02-26 Tom Tromey <tromey@redhat.com>
* elfread.c (elf_read_minimal_symbols): Return early if
minimal symbols have already been read. Add "ei" parameter.
(elf_symfile_read): Call elf_read_minimal_symbols earlier.
* minsyms.c (prim_record_minimal_symbol_full): Update.
* objfiles.h (struct objstats) <n_minsyms>: Move...
(struct objfile_per_bfd_storage) <n_minsyms>: ... here.
* symmisc.c (print_objfile_statistics): Update.
This is just a simple refactoring in elfread.c to split out the
minsym-reading code into its own function.
2014-02-26 Tom Tromey <tromey@redhat.com>
* elfread.c (elf_read_minimal_symbols): New function, from
elf_symfile_read.
(elf_symfile_read): Call it.
This removes the runtime offsets from minsyms. Instead, these offsets
will now be applied whenever the minsym's address is computed.
This patch redefines MSYMBOL_VALUE_ADDRESS to actually use the offsets
from the given objfile. Then, it updates all the symbol readers,
changing them so that they do not add in the section offset when
creating the symbol.
This change also lets us remove relocation of minsyms from
objfile_relocate1 and also msymbols_sort.
2014-02-26 Tom Tromey <tromey@redhat.com>
* minsyms.c (msymbols_sort): Remove.
* minsyms.h (msymbols_sort): Remove.
* objfiles.c (objfile_relocate1): Don't relocate minsyms.
* symtab.h (MSYMBOL_VALUE_ADDRESS): Use objfile offsets.
* elfread.c (elf_symtab_read): Don't add section offsets.
* xcoffread.c (record_minimal_symbol): Don't add section offset
to minimal symbol address.
* somread.c (text_offset, data_offset): Remove.
(som_symtab_read): Don't add section offsets to minimal symbol
addresses.
* coff-pe-read.c (add_pe_forwarded_sym, read_pe_exported_syms):
Don't add section offsets to minimal symbols.
* coffread.c (coff_symtab_read): Don't add section offsets
to minimal symbol addresses.
* machoread.c (macho_symtab_add_minsym): Don't add section offset
to minimal symbol addresses.
* mipsread.c (read_alphacoff_dynamic_symtab): Don't add
section offset to minimal symbol addresses.
* mdebugread.c (parse_partial_symbols): Don't add section
offset to minimal symbol addresses.
* dbxread.c (read_dbx_dynamic_symtab): Don't add section
offset to minimal symbol addresses.
There are two failures in the gnu-ifunc.exp test on ARM. These are
due to the failure to resolve the correct target function when
attempting to breakpoint a GNU ifunc resolved function:
(gdb) break gnu_ifunc
Breakpoint 4 at gnu-indirect-function resolver at 0x2aacb5a2
when gnu_ifunc has been resolved this should actually be:
(gdb) break gnu_ifunc
Breakpoint 4 at 0x868c
There are two reasons for this. The first is that ARM does not have a
separate .got.plt section so looking this up will always fail. The second
is that the Thumb bit needs to be stripped from the address to allow
it to be reliably compared when inserting into the ifunc cache.
Tested with no regressions on arm-linux-gnueabihf and
x86_64-unknown-linux-gnu.
gdb/ChangeLog:
2014-02-10 Will Newton <will.newton@linaro.org>
* elfread.c (elf_rel_plt_read): Look for a .got section if
looking up .got.plt fails.
(elf_gnu_ifunc_resolve_by_got): Call gdbarch_addr_bits_remove
on address passed to elf_gnu_ifunc_record_cache.
(elf_gnu_ifunc_resolve_addr): Likewise.
(elf_gnu_ifunc_resolver_return_stop): Likewise.
This removes XCALLOC and replaces it either with XCNEWVEC, or, if the
number of elements being requested was 1, with XCNEW.
2014-01-13 Tom Tromey <tromey@redhat.com>
* defs.h (XCALLOC): Remove.
* bcache.c (bcache_xmalloc): Use XCNEW, not XCALLOC.
(print_bcache_statistics): Use XCNEWVEC, not XCALLOC.
* dwarf2loc.c (allocate_piece_closure): Likewise.
* elfread.c (elf_symfile_segments): Likewise.
(elf_symfile_segments): Likewise.
* gdbtypes.c (copy_type_recursive): Likewise.
* i386-tdep.c (i386_gdbarch_init): Use XCNEW, not XCALLOC.
* jit.c (jit_frame_sniffer): Use XCNEWVEC, not XCALLOC.
* minsyms.c (prim_record_minimal_symbol_full): Use XCNEW, not
XCALLOC.
* mt-tdep.c (mt_gdbarch_init): Likewise.
* opencl-lang.c (allocate_lval_closure): Use XCNEWVEC, not
XCALLOC.
* psymtab.c (psymbol_compare): Use XCNEW, not XCALLOC.
* regcache.c (regcache_xmalloc_1): Use XCNEWVEC, not XCALLOC.
* registry.c (registry_alloc_data): Likewise.
* rs6000-tdep.c (rs6000_gdbarch_init): Use XCNEW, not XCALLOC.
* s390-linux-tdep.c (s390_gdbarch_init): Likewise.
* serial.c (serial_fdopen_ops): Likewise.
* solib-aix.c (solib_aix_get_section_offsets): Use XCNEWVEC, not
XCALLOC.
* spu-tdep.c (spu_gdbarch_init): Use XCNEW, not XCALLOC.
* symfile.c (default_symfile_segments): Use XCNEW and XCNEWVEC,
not XCALLOC.
While looking into the probe API, it seemed to me that there were a
number of methods in sym_probe_fns that were not needed. This patch
removes them.
Specifically, it seems to me that sym_probe_fns ought to be concerned
with the API for constructing the probes. Any method relating to some
aspect of an individual probe can be handled via the probe's own
vtable. That is, the double indirection here doesn't seem useful --
it certainly isn't in fact used, but also I couldn't think of a
potential use.
2013-12-06 Tom Tromey <tromey@redhat.com>
* break-catch-throw.c (fetch_probe_arguments): Use
get_probe_argument_count and evaluate_probe_argument.
* elfread.c (elf_get_probe_argument_count)
(elf_can_evaluate_probe_arguments, elf_evaluate_probe_argument)
(elf_compile_to_ax): Remove.
(elf_probe_fns): Update.
* probe.c (get_probe_argument_count, can_evaluate_probe_arguments)
(evaluate_probe_argument): Call method on probe, not via sym
functions.
* stap-probe.c (compute_probe_arg): Use get_probe_argument_count,
evaluate_probe_argument.
(compile_probe_arg): Use get_probe_argument_count. Call method on
probe, not via sym functions.
* symfile-debug.c (debug_sym_get_probe_argument_count)
(debug_can_evaluate_probe_arguments)
(debug_sym_evaluate_probe_argument, debug_sym_compile_to_ax):
Remove.
(debug_sym_probe_fns): Remove.
* symfile.h (struct sym_probe_fns) <sym_get_probe_argument_count,
can_evaluate_probe_arguments, sym_evaluate_probe_argument,
sym_compile_to_ax>: Remove fields.
This removes gdb_string.h. This patch is purely mechanical. I
created it by running the two commands:
git rm common/gdb_string.h
perl -pi -e's/"gdb_string.h"/<string.h>/;' *.[chyl] */*.[chyl]
2013-11-18 Tom Tromey <tromey@redhat.com>
* common/gdb_string.h: Remove.
* aarch64-tdep.c: Use string.h, not gdb_string.h.
* ada-exp.y: Use string.h, not gdb_string.h.
* ada-lang.c: Use string.h, not gdb_string.h.
* ada-lex.l: Use string.h, not gdb_string.h.
* ada-typeprint.c: Use string.h, not gdb_string.h.
* ada-valprint.c: Use string.h, not gdb_string.h.
* aix-thread.c: Use string.h, not gdb_string.h.
* alpha-linux-tdep.c: Use string.h, not gdb_string.h.
* alpha-mdebug-tdep.c: Use string.h, not gdb_string.h.
* alpha-nat.c: Use string.h, not gdb_string.h.
* alpha-osf1-tdep.c: Use string.h, not gdb_string.h.
* alpha-tdep.c: Use string.h, not gdb_string.h.
* alphanbsd-tdep.c: Use string.h, not gdb_string.h.
* amd64-dicos-tdep.c: Use string.h, not gdb_string.h.
* amd64-linux-nat.c: Use string.h, not gdb_string.h.
* amd64-linux-tdep.c: Use string.h, not gdb_string.h.
* amd64-nat.c: Use string.h, not gdb_string.h.
* amd64-sol2-tdep.c: Use string.h, not gdb_string.h.
* amd64fbsd-tdep.c: Use string.h, not gdb_string.h.
* amd64obsd-tdep.c: Use string.h, not gdb_string.h.
* arch-utils.c: Use string.h, not gdb_string.h.
* arm-linux-nat.c: Use string.h, not gdb_string.h.
* arm-linux-tdep.c: Use string.h, not gdb_string.h.
* arm-tdep.c: Use string.h, not gdb_string.h.
* arm-wince-tdep.c: Use string.h, not gdb_string.h.
* armbsd-tdep.c: Use string.h, not gdb_string.h.
* armnbsd-nat.c: Use string.h, not gdb_string.h.
* armnbsd-tdep.c: Use string.h, not gdb_string.h.
* armobsd-tdep.c: Use string.h, not gdb_string.h.
* avr-tdep.c: Use string.h, not gdb_string.h.
* ax-gdb.c: Use string.h, not gdb_string.h.
* ax-general.c: Use string.h, not gdb_string.h.
* bcache.c: Use string.h, not gdb_string.h.
* bfin-tdep.c: Use string.h, not gdb_string.h.
* breakpoint.c: Use string.h, not gdb_string.h.
* build-id.c: Use string.h, not gdb_string.h.
* buildsym.c: Use string.h, not gdb_string.h.
* c-exp.y: Use string.h, not gdb_string.h.
* c-lang.c: Use string.h, not gdb_string.h.
* c-typeprint.c: Use string.h, not gdb_string.h.
* c-valprint.c: Use string.h, not gdb_string.h.
* charset.c: Use string.h, not gdb_string.h.
* cli-out.c: Use string.h, not gdb_string.h.
* cli/cli-cmds.c: Use string.h, not gdb_string.h.
* cli/cli-decode.c: Use string.h, not gdb_string.h.
* cli/cli-dump.c: Use string.h, not gdb_string.h.
* cli/cli-interp.c: Use string.h, not gdb_string.h.
* cli/cli-logging.c: Use string.h, not gdb_string.h.
* cli/cli-script.c: Use string.h, not gdb_string.h.
* cli/cli-setshow.c: Use string.h, not gdb_string.h.
* cli/cli-utils.c: Use string.h, not gdb_string.h.
* coffread.c: Use string.h, not gdb_string.h.
* common/common-utils.c: Use string.h, not gdb_string.h.
* common/filestuff.c: Use string.h, not gdb_string.h.
* common/linux-procfs.c: Use string.h, not gdb_string.h.
* common/linux-ptrace.c: Use string.h, not gdb_string.h.
* common/signals.c: Use string.h, not gdb_string.h.
* common/vec.h: Use string.h, not gdb_string.h.
* core-regset.c: Use string.h, not gdb_string.h.
* corefile.c: Use string.h, not gdb_string.h.
* corelow.c: Use string.h, not gdb_string.h.
* cp-abi.c: Use string.h, not gdb_string.h.
* cp-support.c: Use string.h, not gdb_string.h.
* cp-valprint.c: Use string.h, not gdb_string.h.
* cris-tdep.c: Use string.h, not gdb_string.h.
* d-lang.c: Use string.h, not gdb_string.h.
* dbxread.c: Use string.h, not gdb_string.h.
* dcache.c: Use string.h, not gdb_string.h.
* demangle.c: Use string.h, not gdb_string.h.
* dicos-tdep.c: Use string.h, not gdb_string.h.
* disasm.c: Use string.h, not gdb_string.h.
* doublest.c: Use string.h, not gdb_string.h.
* dsrec.c: Use string.h, not gdb_string.h.
* dummy-frame.c: Use string.h, not gdb_string.h.
* dwarf2-frame.c: Use string.h, not gdb_string.h.
* dwarf2loc.c: Use string.h, not gdb_string.h.
* dwarf2read.c: Use string.h, not gdb_string.h.
* elfread.c: Use string.h, not gdb_string.h.
* environ.c: Use string.h, not gdb_string.h.
* eval.c: Use string.h, not gdb_string.h.
* event-loop.c: Use string.h, not gdb_string.h.
* exceptions.c: Use string.h, not gdb_string.h.
* exec.c: Use string.h, not gdb_string.h.
* expprint.c: Use string.h, not gdb_string.h.
* f-exp.y: Use string.h, not gdb_string.h.
* f-lang.c: Use string.h, not gdb_string.h.
* f-typeprint.c: Use string.h, not gdb_string.h.
* f-valprint.c: Use string.h, not gdb_string.h.
* fbsd-nat.c: Use string.h, not gdb_string.h.
* findcmd.c: Use string.h, not gdb_string.h.
* findvar.c: Use string.h, not gdb_string.h.
* fork-child.c: Use string.h, not gdb_string.h.
* frame.c: Use string.h, not gdb_string.h.
* frv-linux-tdep.c: Use string.h, not gdb_string.h.
* frv-tdep.c: Use string.h, not gdb_string.h.
* gdb.c: Use string.h, not gdb_string.h.
* gdb_bfd.c: Use string.h, not gdb_string.h.
* gdbarch.c: Use string.h, not gdb_string.h.
* gdbtypes.c: Use string.h, not gdb_string.h.
* gnu-nat.c: Use string.h, not gdb_string.h.
* gnu-v2-abi.c: Use string.h, not gdb_string.h.
* gnu-v3-abi.c: Use string.h, not gdb_string.h.
* go-exp.y: Use string.h, not gdb_string.h.
* go-lang.c: Use string.h, not gdb_string.h.
* go32-nat.c: Use string.h, not gdb_string.h.
* hppa-hpux-tdep.c: Use string.h, not gdb_string.h.
* hppa-linux-nat.c: Use string.h, not gdb_string.h.
* hppanbsd-tdep.c: Use string.h, not gdb_string.h.
* hppaobsd-tdep.c: Use string.h, not gdb_string.h.
* i386-cygwin-tdep.c: Use string.h, not gdb_string.h.
* i386-dicos-tdep.c: Use string.h, not gdb_string.h.
* i386-linux-nat.c: Use string.h, not gdb_string.h.
* i386-linux-tdep.c: Use string.h, not gdb_string.h.
* i386-nto-tdep.c: Use string.h, not gdb_string.h.
* i386-sol2-tdep.c: Use string.h, not gdb_string.h.
* i386-tdep.c: Use string.h, not gdb_string.h.
* i386bsd-tdep.c: Use string.h, not gdb_string.h.
* i386gnu-nat.c: Use string.h, not gdb_string.h.
* i386nbsd-tdep.c: Use string.h, not gdb_string.h.
* i386obsd-tdep.c: Use string.h, not gdb_string.h.
* i387-tdep.c: Use string.h, not gdb_string.h.
* ia64-libunwind-tdep.c: Use string.h, not gdb_string.h.
* ia64-linux-nat.c: Use string.h, not gdb_string.h.
* inf-child.c: Use string.h, not gdb_string.h.
* inf-ptrace.c: Use string.h, not gdb_string.h.
* inf-ttrace.c: Use string.h, not gdb_string.h.
* infcall.c: Use string.h, not gdb_string.h.
* infcmd.c: Use string.h, not gdb_string.h.
* inflow.c: Use string.h, not gdb_string.h.
* infrun.c: Use string.h, not gdb_string.h.
* interps.c: Use string.h, not gdb_string.h.
* iq2000-tdep.c: Use string.h, not gdb_string.h.
* irix5-nat.c: Use string.h, not gdb_string.h.
* jv-exp.y: Use string.h, not gdb_string.h.
* jv-lang.c: Use string.h, not gdb_string.h.
* jv-typeprint.c: Use string.h, not gdb_string.h.
* jv-valprint.c: Use string.h, not gdb_string.h.
* language.c: Use string.h, not gdb_string.h.
* linux-fork.c: Use string.h, not gdb_string.h.
* linux-nat.c: Use string.h, not gdb_string.h.
* lm32-tdep.c: Use string.h, not gdb_string.h.
* m2-exp.y: Use string.h, not gdb_string.h.
* m2-typeprint.c: Use string.h, not gdb_string.h.
* m32c-tdep.c: Use string.h, not gdb_string.h.
* m32r-linux-nat.c: Use string.h, not gdb_string.h.
* m32r-linux-tdep.c: Use string.h, not gdb_string.h.
* m32r-rom.c: Use string.h, not gdb_string.h.
* m32r-tdep.c: Use string.h, not gdb_string.h.
* m68hc11-tdep.c: Use string.h, not gdb_string.h.
* m68k-tdep.c: Use string.h, not gdb_string.h.
* m68kbsd-tdep.c: Use string.h, not gdb_string.h.
* m68klinux-nat.c: Use string.h, not gdb_string.h.
* m68klinux-tdep.c: Use string.h, not gdb_string.h.
* m88k-tdep.c: Use string.h, not gdb_string.h.
* macrocmd.c: Use string.h, not gdb_string.h.
* main.c: Use string.h, not gdb_string.h.
* mdebugread.c: Use string.h, not gdb_string.h.
* mem-break.c: Use string.h, not gdb_string.h.
* memattr.c: Use string.h, not gdb_string.h.
* memory-map.c: Use string.h, not gdb_string.h.
* mep-tdep.c: Use string.h, not gdb_string.h.
* mi/mi-cmd-break.c: Use string.h, not gdb_string.h.
* mi/mi-cmd-disas.c: Use string.h, not gdb_string.h.
* mi/mi-cmd-env.c: Use string.h, not gdb_string.h.
* mi/mi-cmd-stack.c: Use string.h, not gdb_string.h.
* mi/mi-cmd-var.c: Use string.h, not gdb_string.h.
* mi/mi-cmds.c: Use string.h, not gdb_string.h.
* mi/mi-console.c: Use string.h, not gdb_string.h.
* mi/mi-getopt.c: Use string.h, not gdb_string.h.
* mi/mi-interp.c: Use string.h, not gdb_string.h.
* mi/mi-main.c: Use string.h, not gdb_string.h.
* mi/mi-parse.c: Use string.h, not gdb_string.h.
* microblaze-rom.c: Use string.h, not gdb_string.h.
* microblaze-tdep.c: Use string.h, not gdb_string.h.
* mingw-hdep.c: Use string.h, not gdb_string.h.
* minidebug.c: Use string.h, not gdb_string.h.
* minsyms.c: Use string.h, not gdb_string.h.
* mips-irix-tdep.c: Use string.h, not gdb_string.h.
* mips-linux-tdep.c: Use string.h, not gdb_string.h.
* mips-tdep.c: Use string.h, not gdb_string.h.
* mips64obsd-tdep.c: Use string.h, not gdb_string.h.
* mipsnbsd-tdep.c: Use string.h, not gdb_string.h.
* mipsread.c: Use string.h, not gdb_string.h.
* mn10300-linux-tdep.c: Use string.h, not gdb_string.h.
* mn10300-tdep.c: Use string.h, not gdb_string.h.
* monitor.c: Use string.h, not gdb_string.h.
* moxie-tdep.c: Use string.h, not gdb_string.h.
* mt-tdep.c: Use string.h, not gdb_string.h.
* nbsd-tdep.c: Use string.h, not gdb_string.h.
* nios2-linux-tdep.c: Use string.h, not gdb_string.h.
* nto-procfs.c: Use string.h, not gdb_string.h.
* nto-tdep.c: Use string.h, not gdb_string.h.
* objc-lang.c: Use string.h, not gdb_string.h.
* objfiles.c: Use string.h, not gdb_string.h.
* opencl-lang.c: Use string.h, not gdb_string.h.
* osabi.c: Use string.h, not gdb_string.h.
* osdata.c: Use string.h, not gdb_string.h.
* p-exp.y: Use string.h, not gdb_string.h.
* p-lang.c: Use string.h, not gdb_string.h.
* p-typeprint.c: Use string.h, not gdb_string.h.
* parse.c: Use string.h, not gdb_string.h.
* posix-hdep.c: Use string.h, not gdb_string.h.
* ppc-linux-nat.c: Use string.h, not gdb_string.h.
* ppc-sysv-tdep.c: Use string.h, not gdb_string.h.
* ppcfbsd-tdep.c: Use string.h, not gdb_string.h.
* ppcnbsd-tdep.c: Use string.h, not gdb_string.h.
* ppcobsd-tdep.c: Use string.h, not gdb_string.h.
* printcmd.c: Use string.h, not gdb_string.h.
* procfs.c: Use string.h, not gdb_string.h.
* prologue-value.c: Use string.h, not gdb_string.h.
* python/py-auto-load.c: Use string.h, not gdb_string.h.
* python/py-gdb-readline.c: Use string.h, not gdb_string.h.
* ravenscar-thread.c: Use string.h, not gdb_string.h.
* regcache.c: Use string.h, not gdb_string.h.
* registry.c: Use string.h, not gdb_string.h.
* remote-fileio.c: Use string.h, not gdb_string.h.
* remote-m32r-sdi.c: Use string.h, not gdb_string.h.
* remote-mips.c: Use string.h, not gdb_string.h.
* remote-sim.c: Use string.h, not gdb_string.h.
* remote.c: Use string.h, not gdb_string.h.
* reverse.c: Use string.h, not gdb_string.h.
* rs6000-aix-tdep.c: Use string.h, not gdb_string.h.
* ser-base.c: Use string.h, not gdb_string.h.
* ser-go32.c: Use string.h, not gdb_string.h.
* ser-mingw.c: Use string.h, not gdb_string.h.
* ser-pipe.c: Use string.h, not gdb_string.h.
* ser-tcp.c: Use string.h, not gdb_string.h.
* ser-unix.c: Use string.h, not gdb_string.h.
* serial.c: Use string.h, not gdb_string.h.
* sh-tdep.c: Use string.h, not gdb_string.h.
* sh64-tdep.c: Use string.h, not gdb_string.h.
* shnbsd-tdep.c: Use string.h, not gdb_string.h.
* skip.c: Use string.h, not gdb_string.h.
* sol-thread.c: Use string.h, not gdb_string.h.
* solib-dsbt.c: Use string.h, not gdb_string.h.
* solib-frv.c: Use string.h, not gdb_string.h.
* solib-osf.c: Use string.h, not gdb_string.h.
* solib-spu.c: Use string.h, not gdb_string.h.
* solib-target.c: Use string.h, not gdb_string.h.
* solib.c: Use string.h, not gdb_string.h.
* somread.c: Use string.h, not gdb_string.h.
* source.c: Use string.h, not gdb_string.h.
* sparc-nat.c: Use string.h, not gdb_string.h.
* sparc-sol2-tdep.c: Use string.h, not gdb_string.h.
* sparc-tdep.c: Use string.h, not gdb_string.h.
* sparc64-tdep.c: Use string.h, not gdb_string.h.
* sparc64fbsd-tdep.c: Use string.h, not gdb_string.h.
* sparc64nbsd-tdep.c: Use string.h, not gdb_string.h.
* sparcnbsd-tdep.c: Use string.h, not gdb_string.h.
* spu-linux-nat.c: Use string.h, not gdb_string.h.
* spu-multiarch.c: Use string.h, not gdb_string.h.
* spu-tdep.c: Use string.h, not gdb_string.h.
* stabsread.c: Use string.h, not gdb_string.h.
* stack.c: Use string.h, not gdb_string.h.
* std-regs.c: Use string.h, not gdb_string.h.
* symfile.c: Use string.h, not gdb_string.h.
* symmisc.c: Use string.h, not gdb_string.h.
* symtab.c: Use string.h, not gdb_string.h.
* target.c: Use string.h, not gdb_string.h.
* thread.c: Use string.h, not gdb_string.h.
* tilegx-linux-nat.c: Use string.h, not gdb_string.h.
* tilegx-tdep.c: Use string.h, not gdb_string.h.
* top.c: Use string.h, not gdb_string.h.
* tracepoint.c: Use string.h, not gdb_string.h.
* tui/tui-command.c: Use string.h, not gdb_string.h.
* tui/tui-data.c: Use string.h, not gdb_string.h.
* tui/tui-disasm.c: Use string.h, not gdb_string.h.
* tui/tui-file.c: Use string.h, not gdb_string.h.
* tui/tui-layout.c: Use string.h, not gdb_string.h.
* tui/tui-out.c: Use string.h, not gdb_string.h.
* tui/tui-regs.c: Use string.h, not gdb_string.h.
* tui/tui-source.c: Use string.h, not gdb_string.h.
* tui/tui-stack.c: Use string.h, not gdb_string.h.
* tui/tui-win.c: Use string.h, not gdb_string.h.
* tui/tui-windata.c: Use string.h, not gdb_string.h.
* tui/tui-winsource.c: Use string.h, not gdb_string.h.
* typeprint.c: Use string.h, not gdb_string.h.
* ui-file.c: Use string.h, not gdb_string.h.
* ui-out.c: Use string.h, not gdb_string.h.
* user-regs.c: Use string.h, not gdb_string.h.
* utils.c: Use string.h, not gdb_string.h.
* v850-tdep.c: Use string.h, not gdb_string.h.
* valarith.c: Use string.h, not gdb_string.h.
* valops.c: Use string.h, not gdb_string.h.
* valprint.c: Use string.h, not gdb_string.h.
* value.c: Use string.h, not gdb_string.h.
* varobj.c: Use string.h, not gdb_string.h.
* vax-tdep.c: Use string.h, not gdb_string.h.
* vaxnbsd-tdep.c: Use string.h, not gdb_string.h.
* vaxobsd-tdep.c: Use string.h, not gdb_string.h.
* windows-nat.c: Use string.h, not gdb_string.h.
* xcoffread.c: Use string.h, not gdb_string.h.
* xml-support.c: Use string.h, not gdb_string.h.
* xstormy16-tdep.c: Use string.h, not gdb_string.h.
* xtensa-linux-nat.c: Use string.h, not gdb_string.h.
I noticed that one field in elfread.c:struct elfinfo is unused.
This patch removes it.
* elfread.c (struct elfinfo) <stabindexsect>: Remove.
(elf_locate_sections): Update.
This patch fixes gdb PR symtab/15597.
The bug is that the .gnu_debugaltlink section includes the build-id of
the alt file, but gdb does not use it.
This patch fixes the problem by changing gdb to do what it ought to
always have done: verify the build id of the file found using the
filename in .gnu_debugaltlink; and if that does not match, try to find
the correct debug file using the build-id and debug-file-directory.
This patch touches BFD. Previously, gdb had its own code for parsing
.gnu_debugaltlink; I changed it to use the BFD functions after those
were introduced. However, the BFD functions are incorrect -- they
assume that .gnu_debugaltlink is formatted like .gnu_debuglink.
However, it it is not. Instead, it consists of a file name followed
by the build-id -- no alignment, and the build-id is not a CRC.
Fixing this properly is a bit of a pain. But, because
separate_alt_debug_file_exists just has a FIXME for the build-id case,
I did not fix it properly. Instead I introduced a hack. This leaves
BFD working just as well as it did before my patch.
I'm willing to do something better here but I could use some guidance
as to what. It seems that the build-id code in BFD is largely punted
on.
FWIW gdb is the only user of bfd_get_alt_debug_link_info outside of
BFD itself.
I moved the build-id logic out of elfread.c and into a new file.
This seemed cleanest to me.
Writing a test case was a bit of a pain. I added a couple new
features to the DWARF assembler to handle this.
Built and regtested on x86-64 Fedora 18.
* bfd-in2.h: Rebuild.
* opncls.c (bfd_get_alt_debug_link_info): Add buildid_len
parameter. Change type of buildid_out. Update.
(get_alt_debug_link_info_shim): New function.
(bfd_follow_gnu_debuglink): Use it.
* Makefile.in (SFILES): Add build-id.c.
(HFILES_NO_SRCDIR): Add build-id.h.
* build-id.c: New file, largely from elfread.c. Modified
most functions.
* build-id.h: New file.
* dwarf2read.c (dwarf2_get_dwz_file): Update for change to
bfd_get_alt_debug_link_info. Verify dwz file's build-id.
Search for dwz file using build-id.
* elfread.c (build_id_bfd_get, build_id_verify)
(build_id_to_debug_filename, find_separate_debug_file): Remove.
* gdb.dwarf2/dwzbuildid.exp: New file.
* lib/dwarf.exp (Dwarf::_section): Add "flags" and "type"
parameters.
(Dwarf::_defer_output): Change "section" parameter to
"section_spec"; update.
(Dwarf::gnu_debugaltlink, Dwarf::_note, Dwarf::build_id): New
procs.
* NEWS: Mention "set debug symfile".
* Makefile.in (SFILES): Add symfile-debug.c.
(COMMON_OBS): Add symfile-debug.o.
* elfread.c (elf_symfile_read): Use objfile_set_sym_fns to set the
objfile's symbol functions.
* objfiles.h (objfile_set_sym_fns): Declare.
* symfile-debug.c: New file.
* symfile.c (syms_from_objfile_1): Use objfile_set_sym_fns to set the
objfile's symbol functions.
(reread_symbols): Ditto.
All uses updated.
(add_symtab_fns): Update prototype.
* symfile.c (sym_fns_ptr): Delete. Replace with ...
(registered_sym_fns): ... this.
(symtab_fns): Update.
(add_symtab_fns): New arg "flavour". All callers updated.
(find_sym_fns): Rewrite to use new sym_fns registry.
gdb/
2013-09-24 Jan Kratochvil <jan.kratochvil@redhat.com>
Pass down original filename for objfile.
* coffread.c (coff_symfile_read): Update symbol_file_add_separate call.
* elfread.c (elf_symfile_read): Likewise.
* jit.c (jit_object_close_impl): Update allocate_objfile call, no
longer set ORIGINAL_NAME.
(jit_bfd_try_read_symtab): Update symbol_file_add_from_bfd call.
* jv-lang.c (get_dynamics_objfile): Update allocate_objfile call.
* machoread.c (macho_add_oso_symfile): Add parameter name. Update
symbol_file_add_from_bfd call.
(macho_symfile_read_all_oso): Update two macho_add_oso_symfile calls.
(macho_check_dsym): Add parameter filenamep. Change function comment.
Set *filenamep.
(macho_symfile_read): New variable dsym_filename. Update
macho_check_dsym call. Use it for symbol_file_add_separate.
* objfiles.c (allocate_objfile): Add parameter name. New comment for
it. Use it for objfile->original_name.
(objfile_name): Return OBFD's filename, if available.
* objfiles.h (allocate_objfile): Add new parameter name.
* solib.c (solib_read_symbols): Update symbol_file_add_from_bfd call.
* symfile-mem.c (symbol_file_add_from_memory): Update
symbol_file_add_from_bfd call.
* symfile.c (read_symbols): Update symbol_file_add_separate call, new
comment for it.
(symbol_file_add_with_addrs): New parameter name, add function comment
for it. Remove variable name. Update allocate_objfile call.
(symbol_file_add_separate): New parameter name, add function comment
for it. Update symbol_file_add_with_addrs call.
(symbol_file_add_from_bfd): New parameter name. Update
symbol_file_add_with_addrs call.
(symbol_file_add): Update symbol_file_add_from_bfd call.
(reread_symbols): New variable original_name. Save
objfile->original_name by it.
* symfile.h (symbol_file_add_from_bfd, symbol_file_add_separate): Add
second parameter.
Tom Tromey