Intel MPX introduces 4 bound registers, which will be used for parameter
passing in x86-64. Bound registers are cleared by branch instructions.
Branch instructions with BND prefix will keep bound register contents.
This leads to 2 requirements to 64-bit MPX run-time:
1. Dynamic linker (ld.so) should save and restore bound registers during
symbol lookup.
2. Change the current 16-byte PLT0:
ff 35 08 00 00 00 pushq GOT+8(%rip)
ff 25 00 10 00 jmpq *GOT+16(%rip)
0f 1f 40 00 nopl 0x0(%rax)
and 16-byte PLT1:
ff 25 00 00 00 00 jmpq *name@GOTPCREL(%rip)
68 00 00 00 00 pushq $index
e9 00 00 00 00 jmpq PLT0
which clear bound registers, to preserve bound registers.
We use 2 new relocations:
to mark branch instructions with BND prefix.
When linker sees any R_X86_64_PC32_BND or R_X86_64_PLT32_BND relocations,
it switches to a different PLT0:
ff 35 08 00 00 00 pushq GOT+8(%rip)
f2 ff 25 00 10 00 bnd jmpq *GOT+16(%rip)
0f 1f 00 nopl (%rax)
to preserve bound registers for symbol lookup and it also creates an
external PLT section, .pl.bnd. Linker will create a BND PLT1 entry
in .plt:
68 00 00 00 00 pushq $index
f2 e9 00 00 00 00 bnd jmpq PLT0
0f 1f 44 00 00 nopl 0(%rax,%rax,1)
and a 8-byte BND PLT entry in .plt.bnd:
f2 ff 25 00 00 00 00 bnd jmpq *name@GOTPCREL(%rip)
90 nop
Otherwise, linker will create a legacy PLT1 entry in .plt:
68 00 00 00 00 pushq $index
e9 00 00 00 00 jmpq PLT0
66 0f 1f 44 00 00 nopw 0(%rax,%rax,1)
and a 8-byte legacy PLT in .plt.bnd:
ff 25 00 00 00 00 jmpq *name@GOTPCREL(%rip)
66 90 xchg %ax,%ax
The initial value of the GOT entry for "name" will be set to the the
"pushq" instruction in the corresponding entry in .plt. Linker will
resolve reference of symbol "name" to the entry in the second PLT,
.plt.bnd.
Prelink stores the offset of pushq of PLT1 (plt_base + 0x10) in GOT[1]
and GOT[1] is stored in GOT[3]. We can undo prelink in GOT by computing
the corresponding the pushq offset with
GOT[1] + (GOT offset - &GOT[3]) * 2
Since for each entry in .plt except for PLT0 we create a 8-byte entry in
.plt.bnd, there is extra 8-byte per PLT symbol.
We also investigated the 16-byte entry for .plt.bnd. We compared the
8-byte entry vs the the 16-byte entry for .plt.bnd on Sandy Bridge.
There are no performance differences in SPEC CPU 2000/2006 as well as
micro benchmarks.
Pros:
No change to undo prelink in dynamic linker.
Only 8-byte memory overhead for each PLT symbol.
Cons:
Extra .plt.bnd section is needed.
Extra 8 byte for legacy branches to PLT.
GDB is unware of the new layout of .plt and .plt.bnd.
bfd/
* elf64-x86-64.c (elf_x86_64_bnd_plt0_entry): New.
(elf_x86_64_legacy_plt_entry): Likewise.
(elf_x86_64_bnd_plt_entry): Likewise.
(elf_x86_64_legacy_plt2_entry): Likewise.
(elf_x86_64_bnd_plt2_entry): Likewise.
(elf_x86_64_bnd_arch_bed): Likewise.
(elf_x86_64_link_hash_entry): Add has_bnd_reloc and plt_bnd.
(elf_x86_64_link_hash_table): Add plt_bnd.
(elf_x86_64_link_hash_newfunc): Initialize has_bnd_reloc and
plt_bnd.
(elf_x86_64_copy_indirect_symbol): Also copy has_bnd_reloc.
(elf_x86_64_check_relocs): Create the second PLT for Intel MPX
in 64-bit mode.
(elf_x86_64_allocate_dynrelocs): Handle the second PLT for IFUNC
symbols. Resolve call to the second PLT if it is created.
(elf_x86_64_size_dynamic_sections): Keep the second PLT section.
(elf_x86_64_relocate_section): Resolve PLT references to the
second PLT if it is created.
(elf_x86_64_finish_dynamic_symbol): Use BND PLT0 and fill the
second PLT entry for BND relocation.
(elf_x86_64_finish_dynamic_sections): Use MPX backend data if
the second PLT is created.
(elf_x86_64_get_synthetic_symtab): New.
(bfd_elf64_get_synthetic_symtab): Likewise. Undefine for NaCl.
ld/
* emulparams/elf_x86_64.sh (TINY_READONLY_SECTION): New.
ld/testsuite/
* ld-x86-64/mpx.exp: Run bnd-ifunc-1 and bnd-plt-1.
* ld-x86-64/bnd-ifunc-1.d: New file.
* ld-x86-64/bnd-ifunc-1.s: Likewise.
* ld-x86-64/bnd-plt-1.d: Likewise.
This patch allows the user to override powerpc64-ld's default for
providing linker generated register save and restore functions as used
by gcc -Os code. Normally these are not provided by ld -r, so Linux
kernel modules have needed to include their own copies.
bfd/
* elf64-ppc.h (struct ppc64_elf_params): Add save_restore_funcs.
* elf64-ppc.c (ppc64_elf_func_desc_adjust): Use it to control
provision of out-of-line register save/restore routines.
ld/
* emultempl/ppc64elf.em (params): Init new field.
(ppc_create_output_section_statements): Set params.save_restore_funcs
default.
(PARSE_AND_LIST_*): Add support for --save-restore-funcs and
--no-save-restore-funcs.
execute permission regardless of the underlying PT_LOAD segment permissions.
Deleting this code allows the default linker behavior which is to set the
dynamic segment to the same permissions as the sections that make it up.
This change alters one existing test case to check the segment flags for
PT_DYNAMIC.
bfd/ChangeLog
* elfxx-mips.c(_bfd_mips_elf_modify_segment_map): Deleted hard coding of
PT_DYNAMIC segment flags.
ld/testsuite/ChangeLog
* ld-mips-elf/pic-and-nonpic-3a.sd: Check DYNAMIC segment flags.
abfd->section_count unexpectedly changes between 218 and 248 in:
150 bfd_simple_get_relocated_section_contents (bfd *abfd,
[...]
218 saved_offsets = malloc (sizeof (struct saved_output_info)
219 * abfd->section_count);
[...]
230 _bfd_generic_link_add_symbols (abfd, &link_info);
[...]
248 bfd_map_over_sections (abfd, simple_restore_output_info, saved_offsets);
_bfd_generic_link_add_symbols increases section_count
and simple_restore_output_info later reads unallocated part of saved_offsets.
READ of size 8 at 0x601c0000c5c0 thread T0
#0 0x1124770 in simple_restore_output_info (.../gdb/gdb+0x1124770)
#1 0x10ecd51 in bfd_map_over_sections (.../gdb/gdb+0x10ecd51)
#2 0x1125150 in bfd_simple_get_relocated_section_contents (.../gdb/gdb+0x1125150)
bfd/
2014-02-17 Jan Kratochvil <jan.kratochvil@redhat.com>
PR binutils/16595
* simple.c (struct saved_offsets): New.
(simple_save_output_info): Use it for ptr.
(simple_restore_output_info): Use it for ptr. Check section_count.
(bfd_simple_get_relocated_section_contents): Use it for saved_offsets.
Moves assorted variables used to communicate between ld and bfd into
a struct, hooks it into the bfd link_hash_table early, and removes
all other places where such variables were passed piecemeal.
bfd/
* elf64-ppc.h (struct ppc64_elf_params): Define.
(ppc64_elf_init_stub_bfd, ppc64_elf_edit_opd, ppc64_elf_tls_setup,
ppc64_elf_setup_section_lists, ppc64_elf_size_stubs,
ppc64_elf_build_stubs): Update prototype.
* elf64-ppp.c (struct ppc_link_hash_table): Add params, delete other
fields now in params. Adjust code throughout file.
(ppc64_elf_init_stub_bfd): Delete "abfd" parameter, add "params".
Save params pointer in htab.
(ppc64_elf_edit_opd, ppc64_elf_tls_setup,
ppc64_elf_setup_section_lists, ppc64_elf_size_stubs,
ppc64_elf_build_stubs): Remove parameters now in "params".
ld/
* emultemps/ppc64elf.em (params): New static struct replacing
various other static vars. Adjust code throughout file.
This fixes the glaring error that the ppc476 workaround wasn't
actually enabled for ld -r, and adjusts relocations to match moved
code.
bfd/
* elf32-ppc.c (ppc_elf_relocate_section): Move relocs on insns
patched for ppc476 workaround. Reapply branch taken/not taken
relocs.
ld/
* emultempl/ppc32elf.em (ppc_after_open_output): Really enable
ppc476 workaround for ld -r.
Adding long-branch stubs for __tls_get_addr calls that are optimised
away is silly. It also causes assertion failures on newer object files
that use R_PPC_TLSGD and R_PPC_TLSLD marker relocs, and half-optimised
(ie. broken) code for older object files.
PR 16546
* elf32-ppc.c (ppc_elf_relax_section): Don't build long-branch
stubs for calls to __tls_get_addr that we know will later be
optimised away.
The Linux kernel builds modules using ld -r. These might need the
ppc476 workaround, so enable it for ld -r if sections have sufficient
alignment to tell location within a page.
bfd/
* elf32-ppc.c (ppc_elf_relax_section): Enable ppc476 workaround
for ld -r, when code sections are sufficiently aligned.
* elf32-ppc.h (struct ppc_elf_params): Delete pagesize. Add
pagesize_p2.
ld/
* emultempl/ppc32elf.em (pagesize): New static var.
(ppc_after_open_output): Set params.pagesize_p2 from pagesize.
(PARSE_AND_LIST_ARGS_CASES): Adjust to use pagesize.
For powerpc64 as HJ did earlier for other ELF targets, and a tidy.
PR gold/15530
* elf64-ppc.c (ppc64_elf_gc_mark_dynamic_ref): Support
--export-dynamic and --dynamic-list marking of symbols.
* elflink.c (bfd_elf_gc_mark_dynamic_ref_symbol): Reorder
cheap tests first.
This patch provides a means for backend relax_section support to
increase the size of a section without needing to reallocate
section contents. This helps reduce memory usage when the added space
does not need to be written in relax_section, as is the case for
powerpc. Writing the stubs later means a few tweaks are needed in the
powerpc relocate_section function, but also removes some code
duplication since the extra ld -r relocs can be written there too.
* elf-bfd.h (struct elf_backend_data): Add caches_rawsize.
* elfxx-target.h (elf_backend_caches_rawsize): Define.
(elfNN_bed): Init new field.
* elflink.c (elf_link_input_bfd): Handle caches_rawsize.
* elf32-ppc.c (shared_stub_entry): Zero addi offset.
(ppc_elf_relax_section): Don't reallocate section here, write
stubs, or write out relocs for ld -r here..
(ppc_elf_relocate_section): ..instead write stubs here, and use
existing code to write out relocs for ld -r. Fix offset
adjustment on reloc for little-endian.
(elf_backend_caches_rawsize): Define.
bfd/
2014-02-04 Jan Kratochvil <jan.kratochvil@redhat.com>
* coff-rs6000.c (xcoff_write_archive_contents_big): Free OFFSETS in
return paths. Three times.
* elf64-ppc.c (ppc64_elf_link_hash_table_create): Free HTAB in all
return paths.
(ppc64_elf_tls_optimize): Free TOC_REF in return path.
(ppc64_elf_edit_toc): Free USED in return path.
This implements a work-around for an icache bug on 476 that can cause
execution of stale instructions when control falls through from one
page to the next. The idea is to prevent such fall-through by
replacing the last instruction on a page with a branch to a patch
area containing the instruction, then branch to the next page.
The patch also fixes a number of bugs in the existing support for long
branch trampolines.
bfd/
* elf32-ppc.c (struct ppc_elf_link_hash_table): Add params.
Delete emit_stub_syms, no_tls_get_addr_opt. Update all uses.
(ppc_elf_link_params): New function.
(ppc_elf_create_glink): Align .glink to 64 bytes for ppc476
workaround.
(ppc_elf_select_plt_layout): Remove plt_style and emit_stub_syms
parameters. Use htab->params instead.
(ppc_elf_tls_setup): Remove no_tls_get_addr_opt parameter.
(ppc_elf_size_dynamic_sections): Align __glink_PLTresolve to
64 bytes for ppc476 workaround.
(struct ppc_elf_relax_info): New.
(ppc_elf_relax_section): Exclude linker created sections and
those too small to hold one instruction. Don't add another
branch around trampolines on later relax passes. Don't
generate trampolines for undefined symbols when !relocatable,
nor for plugin symbols. Allocate space for ppc476 workaround
patch area. Free fixups on error return path.
(ppc_elf_relocate_section): Handle ppc476 workaround patching.
* elf32-ppc.h (struct ppc_elf_params): New.
(ppc_elf_select_plt_layout, ppc_elf_tls_setup): Update prototype.
(ppc_elf_link_params): Declare.
* section.c (SEC_INFO_TYPE_TARGET): Define.
* bfd-in2.h: Regenerate.
ld/
* emultempl/ppc32elf.em (no_tls_get_addr_opt, emit_stub_syms)
plt_style): Delete. Adjust all refs to instead use..
(params): ..this. New variable.
(ppc_after_open_output): New function. Tweak params and pass to
ppc_elf_link_params.
(ppc_after_open): Adjust ppc_elf_select_plt_layout call.
(ppc_before_allocation): Adjust ppc_elf_tls_setup call. Enable
relaxation for ppc476 workaround.
(PARSE_AND_LIST_*): Add --{no-,}ppc476-workaround support.
(LDEMUL_CREATE_OUTPUT_SECTION_STATEMENTS): Define.
ELFOSABI_GNU for binaries containing unique symbols. So I am reverting that patch and
instead applying the patch below to fix up the targets that were triggering the test failure.
bfd/ChangeLog
2014-01-29 Nick Clifton <nickc@redhat.com>
* elf32-metag.c (elf_metag_post_process_headers): Call
_bfd_elf_post_process_headers.
* elf32-sh64.c (sh64_elf_copy_private_data): Call
_bfd_elf_copy_private_data.
* elf64-sh64.c (sh_elf64_copy_private_data_internal): Likewise.
binutils/testsuite/ChangeLog
2014-01-29 Nick Clifton <nickc@redhat.com>
* binutils-all/strip-10.d: Revert previous delta.
abbreviation may not be the current CU. Thus we need to make sure
that when we read the abbreviation we use the correct CU.
* dwarf2.c (find_abstract_instance_name): For DW_FORM_ref_addr
attributes select the CU containing the abbreviation, which may not
be the current CU.
ELFv2 needs fewer relocs to annotate plt call stubs. I correctly
allocated a smaller buffer and wrote the proper relocs, but stupidly
bumped the reloc count as for ELFv1.
* elf64-ppc.c (ppc_build_one_stub): Correct reloc count passed
to get_relocs for ELFv2.
Bad linker script may lead to TLS sections separated by non-TLS sections
in output. This patch changes linker assert to a linker error to
provide better linker diagnosis.
PR ld/16498
* elf.c (_bfd_elf_map_sections_to_segments): Issue a linker error
if TLS sections are not adjacent.
Adds a section for --as-needed libraries to a linker map file, similar
to what we do for archive libraries.
bfd/
* elflink.c (elf_link_add_object_symbols): Call minfo for --as-needed.
ld/
* ldlang.c (asneeded_list_head, asneeded_list_tail): New vars.
(lang_init): Initialise them.
(lang_print_asneeded): New function.
(lang_process): Call lang_print_asneeded.
* ldlang.h (struct asneeded_minfo): New.
(asneeded_list_tail): Declare.
* ldmain.c (add_archive_element): Improve archive map heading.
* ldmisc.c (minfo): Stash --as-needed info.
After resolving a versioned reference, foo@VER1, to a default versioned
definition, foo@@VER1, from a shared object, we also merge it with
the existing regular default symbol definition, foo. When foo is IFUNC
and foo@@VER1 aren't, we will merge 2 incompatible definitions. This
patch avoids merging foo@@VER1 definition with foo definition if
one is IFUNC and the other isn't.
There is nothing linker can do when a type mismatched default definition
are made dynamic by info->shared, info->export_dynamic or h->ref_dynamic.
But we do want to avoid exporting it when building PIE. Let's remove
those checks.
bfd/
PR ld/2404
* elflink.c (_bfd_elf_merge_symbol): Don't check info->shared,
info->export_dynamic, nor !h->ref_dynamic for type mismatch when
adding the default version.
ld/testsuite/
PR ld/2404
* ld-elf/shared.exp: Add a PIE test for PR ld/2404.
When a symbol is absolute, this code in mips_elf_record_got_page_entry
entry = bfd_zalloc (sec->owner, sizeof (*entry));
segfaults. sec == bfd_abs_section_ptr and sec->owner == NULL.
* elfxx-mips.c (mips_elf_record_got_page_entry): Pass in a
mips_elf_traverse_got_arg* rather than mips_got_info*.
Adjust caller. Alloc on output_bfd rather than symbol section
owner.
It has been fixed by
commit 4199e3b866
Author: Alan Modra <amodra@gmail.com>
Date: Wed Jan 15 21:50:55 2014 +1030
non-PIC references to __ehdr_start in pie and shared
Rather than hacking every backend to not discard dynamic relocations
against an undefined hidden __ehdr_start, make it appear to be defined
early. We want __ehdr_start hidden before size_dynamic_sections so
that it isn't put in .dynsym, but we do need the dynamic relocations
for a PIE or shared library with a non-PIC reference. Defining it
early is wrong if we don't actually define the symbol later to its
proper value. (In some cases we want to leave the symbol undefined,
for example, when the ELF header isn't loaded, and we don't have this
infomation available in before_allocation.)
* elf32-i386.c (elf_i386_allocate_dynrelocs): Revert the last
change.
* elf64-x86-64.c (elf_x86_64_allocate_dynrelocs): Likewise.
__ehdr_start will be defined by assign_file_positions_for_non_load_sections
later.
PR ld/16428
* elf32-i386.c (elf_i386_allocate_dynrelocs): Don't discard relocs
against __ehdr_start.
* elf64-x86-64.c (elf_x86_64_allocate_dynrelocs): Likewise.
PR ld/16428
* elf32-i386.c (elf_i386_allocate_dynrelocs): Don't update reloc
count if there are any non pc-relative relocs.
* elf64-x86-64.c (elf_x86_64_allocate_dynrelocs): Likewise.
On powerpc32, making ifuncs have non-default visibility in shared
libraries or pies can result in runtime failures. The problem is that
if gcc is told that a given function has non-default visibility, then
calls to that function are assumed to be local (which is true) and
thus need not go via a plt call stub (which is false for ifunc). If
the caller has no other reason to set up the got pointer (r30), code
won't be emitted to do so. However, a pic plt call stub makes use of
r30 to load the plt entry. So a call to an ifunc, which always needs
a plt entry, will fail.
This patch makes ld emit an error for the problem case, and allows
calls to non-default visibility ifuncs to work in normal executables.
I also fix some cases where ifuncs fail when using the old bss-plt.
* elf32-ppc.c (ppc_elf_check_relocs): For @local call to ifunc,
error when shared and force a plt call otherwise.
(ppc_elf_size_dynamic_sections): Don't emit DT_PPC_GOT unless
plt_type == PLT_NEW.
(ppc_elf_relocate_section): Add missing test to resolve ifuncs to
the appropriate call stub.
bfd/
2014-01-09 Tristan Gingold <gingold@adacore.com>
* coff-rs6000.c (rs6000coff_vec, pmac_xcoff_vec): use jump
table macros and add macros to initializa the structure.
This patch fixes 2 GNU_RELRO segment bugs:
1. lang_size_sections didn't properly align base to the maximum
alignment power of sections between DATA_SEGMENT_ALIGN and
DATA_SEGMENT_RELRO_END.
2. ld failed to adjust LOAD segment to generate GNU_RELRO segment
when LOAD segment doesn't fit GNU_RELRO segment. This is
https://sourceware.org/bugzilla/show_bug.cgi?id=14207
We "fixed" ld by not generating GNU_RELRO segment. This patch
adjusts LOAD segment to generate GNU_RELRO segment. It fixes
PR ld/16322 and at the same time it also fixes PR binutils/16323
since now we can adjust LOAD segment if it is too small.
bfd/
PR ld/14207
PR ld/16322
PR binutils/16323
* elf.c (_bfd_elf_map_sections_to_segments): Don't check section
size for PT_GNU_RELRO segment.
(assign_file_positions_for_load_sections): If PT_LOAD segment
doesn't fit PT_GNU_RELRO segment, adjust its p_filesz and p_memsz.
ld/
PR ld/14207
PR ld/16322
PR binutils/16323
* ldlang.c (lang_size_sections): Properly align RELRO base.
ld/testsuite/
PR ld/14207
PR ld/16322
PR binutils/16323
* ld-elf/pr16322.d: New file.
* ld-elf/pr16322.s: Likewise.
* ld-x86-64/pr14207.d: Expect PT_GNU_RELRO segment.
This removes the last uses of the obsolete VA_* macros from binutils.
All the binutils and bfd changes were tested by rebuilding.
I didn't rebuild the gas change but I think it is obviously correct.
2014-01-07 Tom Tromey <tromey@redhat.com>
* elf32-xtensa.c (vsprint_msg): Don't use old VA_* compatibility
wrappers.
2014-01-07 Tom Tromey <tromey@redhat.com>
* bucomm.c (fatal, non_fatal): Replace obsolete VA_* macros with
stdarg macros.
* dlltool.c (inform): Replace obsolete VA_* macros with stdarg
macros.
* dllwrap.c (inform, warn): Replace obsolete VA_* macros with
stdarg macros.
2014-01-07 Tom Tromey <tromey@redhat.com>
* config/tc-tic30.c (debug): Avoid old VA_* compatibility
wrappers.
Don't attempt to merge CIEs with a larger number of insns than will
fit in the buffer.
* elf-eh-frame.c (cie_eq): Return false when initial_insn_length
is too large.
(cie_compute_hash): Don't exceed bounds of initial_instructions.
(_bfd_elf_parse_eh_frame): Always set initial_insn_length, and
save as much of insns to initial_instructions[] as will fit.
It is a good pratice to set the SHF_INFO_LINK bit when the sh_info field
represents a section header index.
bfd/
PR binutils/16317
* elf.c (assign_section_numbers): Set the SHF_INFO_LINK bit for
SHT_REL/SHT_RELA sections when setting the sh_info field.
binutils/testsuite/
PR binutils/16317
* binutils-all/readelf.s: Updated.
* binutils-all/readelf.s-64: Likewise.
ld/testsuite/
PR binutils/16317
* ld-elf/linkinfo1.s: New file.
* ld-elf/linkinfo1a.d: Likewise.
* ld-elf/linkinfo1b.d: Likewise.
__CYGWIN__ or __MINGW32__ macro is defined.
(rsrc_cmp): Fix Windows host version and version without wchar header.
[__CYGWIN__, __MINGW32__]: Introduce rsrccmp macro.
Fix coding standard issues.
Include safe-ctype.h.
(HighBitSet, SetHighBit, WithoutHighBit): New macros.
(pe_print_resource_entries): Rename to
rsrc_print_resource_entries. Handle names that are not RVAs.
(pe_print_resource_directory): Rename to
rsrc_print_resource_directory.
(pe_print_rsrc): Rename to rsrc_print_section. Corrupt
computation of RVA bias.
(rsrc_count_entries): New function.
(rsrc_count_directory): New function.
(rsrc_parse_entry): New function.
(rsrc_parse_entries): New function.
(rsrc_parse_directory): New function.
(rsrc_write_string): New function.
(rsrc_compute_rva): New function.
(rsrc_write_leaf): New function.
(rsrc_write_entry): New function.
(rsrc_write_directory): New function.
(u16_mbtouc): New function.
(rsrc_cmp): New function.
(rsrc_print_name): New function.
(rsrc_resource_name): New function.
(rsrc_merge_string_entries): New function.
(rsrc_sort_entries): New function.
(rsrc_attach_chain): New function.
(rsrc_merge): New function.
(rsrc_process_section): New function - merges the contents of a
.rsrc section.
(_bfd_XXi_final_link_postscript): Call rsrc_process_section.
* configure.in (AC_CHECK_HEADERS): Add wchar.h
* config.in: Regenerate.
* configure: Regenerate.
bfd/
* elf.c (assign_file_positions_except_relocs): Set e_type in ELF
header to ET_EXEC for -pie -Ttext-segment=.
2013-12-10 H.J. Lu <hongjiu.lu@intel.com>
* ld-pie/vaddr-0.d: New file.
* ld-pie/vaddr-1.d: Likewise.
* ld-pie/vaddr.s: Likewise.
libx.so refers to some_sym, liby.so provides some_sym@some_version
wasn't seen as satisfying the reference.
* elf64-ppc.c (_bfd_elf_add_default_symbol): Set dynamic_def
and ref_dynamic_nonweak when chaining together indirect
symbols.
an entry in a .rsrc section.
(pe_print_resource_directory): New function: Displays a directory
in a .rsrc section.
(pe_print_rsrc): New function: Displays the contents of .rsrc
section.
(_bfd_XX_print_private_bfd_data_common): Call pe_print_rsrc.
* binutils-all/windres/windres.exp: Run for x86_64-pc-cygwin.
Add test of "objump -p" output.
I don't know what I was thinking here to omit the save of r2.
Possibly I was looking at -msave-toc-indirect code at the time, where
r2 is saved in the function prologue.
* elf64-ppc.c (ppc_build_one_stub <ppc_stub_plt_branch_r2off>):
Don't omit saving of r2 for ELFv2. Don't addi 2,2,0.
(ppc_size_one_stub <ppc_stub_plt_branch_r2off>): Adjust to suit.
With -mcmodel=medium we can't assume that a -R object doesn't use
toc-relative addressing if there's no toc. Lots of things are
accessed via r2, not just the toc/got section. Also, testing for
.opd is plain wrong for ELFv2.
* elf64-ppc.c (ppc64_elf_link_just_syms): Remove .got check.
Handle ELFv2.
bfd/
2013-11-27 Tristan Gingold <gingold@adacore.com>
* pei-x86_64.c (pex_regs): Make it const. Add comments.
(pex64_get_runtime_function): Do not split UnwindData.
(pex64_get_unwind_info): Extract the chain and the handler.
(pex64_xdata_print_uwd_codes): Rewritten: do not reverse print
the opcode, handle version 2, add consistency check, make the
code host neutral.
(pex64_dump_xdata): Change arguments to pass the section and its
content. Handle version 2, change output.
(pex64_bfd_print_pdata): Add comments, load section for xdata.
Avoid duplicate outputs.
include/coff
2013-11-27 Tristan Gingold <gingold@adacore.com>
* pe.h (struct pex64_runtime_function): Remove isChained.
(UWOP_SAVE_XMM): Add comment.
(struct pex64_unwind_info): Remove extra fields.
The code for handling GOT references to ifunc symbols in static links
was missing.
bfd/ChangeLog:
2013-11-26 Will Newton <will.newton@linaro.org>
* elfnn-aarch64.c (elfNN_aarch64_finish_dynamic_symbol):
Handle STT_GNU_IFUNC symbols correctly in static links.
ld/testsuite/ChangeLog:
2013-11-26 Will Newton <will.newton@linaro.org>
* ld-aarch64/aarch64-elf.exp: Add ifunc-22.
* ld-aarch64/ifunc-22.d: New file.
* ld-aarch64/ifunc-22.s: Likewise.
The .got.plt header size was not being correctly taken into account
when calculating the offset for relocations against ifunc symbols.
bfd/ChangeLog:
2013-11-26 Will Newton <will.newton@linaro.org>
* elfnn-aarch64.c (elfNN_aarch64_final_link_relocate): Ensure
PLT_INDEX is calculated using correct header size.
ld/testsuite/ChangeLog:
2013-11-26 Will Newton <will.newton@linaro.org>
* ld-aarch64/aarch64-elf.exp: Add ifunc-21 test.
* ld-aarch64/ifunc-21.d: New file.
* ld-aarch64/ifunc-21.s: Likewise.
output deterministic. time.h include is no longer needed.
* resres.c (res_append_resource): Likewise.
* pe-dll.c (fill_edata): Only use a real timestamp if
--insert-timestamp was used.
* emultempl/pe.em: Add the --insert-timestamp option.
* emultempl/pep.em: Likewise for 64bit.
* ld.texinfo: Document the --insert-timestamp option.
* libcoff-in.h: Add insert_timestamp flag to the pe_data struct.
* libcoff.h: Regenerate.
* peXXigen.c (_bfd_XXi_only_swap_filehdr_out): Only use a real
timestamp if --insert-timestamp was used.
* elf32-arm.c (elf32_arm_populate_plt_entry): Return a boolean
value, TRUE for success, FALSE for failure.
Fail if attempting to create a PLT entry for a thumb only target.
(elf32_arm_final_link_relocate): Check result of calling
elf32_arm_populate_plt_entry.
(elf32_arm_finish_dynamic_symbol): Likewise.
* elfnn-aarch64.c (elfNN_aarch64_howto_table): Use
R_AARCH64_TLS_DTPMOD64 instead of R_AARCH64_TLS_DTPMOD;
likewise for R_AARCH64_TLS_DTPREL and R_AARCH64_TLS_TPREL.
include/elf/
* aarch64.h: Define R_AARCH64_TLS_DTPMOD64,
R_AARCH64_TLS_DTPREL64 and R_AARCH64_TLS_TPREL64; guard
R_AARCH64_TLS_DTPMOD, R_AARCH64_TLS_DTPREL and
R_AARCH64_TLS_TPREL with RELOC_MACROS_GEN_FUNC.
Some places in elf64-ppc.c carelessly used SYMBOL_CALLS_LOCAL when
the proper test is SYMBOL_REFERENCES_LOCAL for cases where we take the
address of a protected symbol. This works OK for function descriptors
but not for ELFv2. Setting symbols to their global entry stub a
little earlier is to ensure _bfd_elf_hash_symbol allows such symbols
in .gnu.hash.
* elf64-ppc.c (ppc64_elf_edit_toc): Use SYMBOL_REFERENCES_LOCAL
here, not SYMBOL_CALLS_LOCAL.
(ppc64_elf_relocate_section): Likewise.
(size_global_entry_stubs): Set undefined symbols on their global
entry stubs here..
(build_global_entry_stubs): ..rather than here.
(ppc64_elf_build_stubs): Don't reset glink->size before calling
build_global_entry_stubs.
bfd/
* archures.c (bfd_mach_i386_nacl): Fix definition so it doesn't
collide with bfd_mach_l1om.
* bfd-in2.h: Regenerate.
* elf32-i386.c (elf32_i386_nacl_elf_object_p): New function.
(elf_backend_object_p): Use that in elf32-i386-nacl definition.
* elf64-x86-64.c (elf64_x86_64_nacl_elf_object_p): New function.
(elf_backend_object_p): Use that in elf64-x86-64-nacl definition.
(elf32_x86_64_nacl_elf_object_p): New function.
(elf_backend_object_p): Use that in elf32-x86-64-nacl definition.
binutils/
* objdump.c (dump_dwarf): Grok bfd_mach_x86_64_nacl and
bfd_mach_x64_32_nacl as equivalent to bfd_mach_x86_64.
ld/testsuite/
* ld-x86-64/x86-64.exp (mixed1, mixed2): Loosen error string match
so it accepts "i386:nacl" in place of "i386".
* ld-x86-64/ilp32-2.d: Likewise.
* ld-x86-64/ilp32-3.d: Likewise.
* ld-x86-64/lp64-2.d: Likewise.
* ld-x86-64/lp64-3.d: Likewise.
I can't see any good reason why anyone would want a dynamic .TOC., so
hide it in a way that is respected by _bfd_elf_export_symbol. This
also fixes an abort in relocate_section on not finding sreloc for .TOC.
* elf64-ppc.c (ppc64_elf_func_desc_adjust): Make .TOC. defined and
hidden.
(ppc64_elf_set_toc): Adjust.
These shortcuts to dynamic sections in ppc_link_hash_table predated
their geneneric elf hash table equivalents.
* elf64-ppc.c (struct ppc_link_hash_table): Remove got, plt, relplt,
iplt, reliplt. Update all references to use elf.sgot, elf.splt,
elf.srelplt, elf.iplt and elf.irelplt.
Changing addis r2,r12,..; addi r2,r2,.. to lis r2,..; addi r2,r2..
in non-PIC executables has the benefit of removing a dependency on r12.
bfd/
* elf64-ppc.c (ppc64_elf_relocate_section): Edit global entry
prologue to non-PIC in non-PIC executables.
ld/testsuite/
* ld-powerpc/elfv2exe.d: Adjust for non-PIC global entry.
In a non-pic executable, ELFv2 like other targets, needs to emit a plt
entry even for non-call references to functions defined in shared
libraries, and define the function on the plt code.
* elf64-ppc.c (ppc64_elf_copy_indirect_symbol): Copy
pointer_equality_needed flag.
(ppc64_elf_check_relocs): For ELFv2 arrange to emit plt
entries for references to functions in shared libraries on
non-call relocs.
(readonly_dynrelocs): Split into function of the same name and..
(maybe_set_textrel): ..this new function. Update call.
(ppc64_elf_adjust_dynamic_symbol): Don't emit dynrelocs for
ELFv2 in most cases if we have a plt entry. Use new
readonly_relocs.
(allocate_dynrelocs): For ELFv2, don't allocate dynreloc space
for ifunc in static executables.
(size_global_entry_stubs): New function.
(ppc64_elf_size_dynamic_sections): Call size_global_entry_stubs.
Save end of glink branch table.
(ppc64_elf_hash_symbol): New function.
(build_global_entry_stubs): New function.
(ppc64_elf_build_stubs): Call build_global_entry_stubs. Adjust
glink sizing.
(ppc64_elf_relocate_section): Tidy plt16/32/64 reloc code.
(ppc64_elf_finish_dynamic_symbol): For ELFv2, adjust symbols
defined on plt code.
Every function has a nominal toc pointer value, even if it isn't used,
so set toc_off for every code section to the value used in that object
file. The thinking here was that if a code section didn't use the toc
it could use the previous object file's toc pointer value. It can,
but doing so is only a gain if functions in that section are called
mostly from previous objects sharing the same toc. We lose if the
functions in question are called mostly from the current object or
following objects, and it's a good bet they will probably mostly be
called from the current object.
* elf64-ppc.c (ppc64_elf_next_input_section): Always set toc_off
to value for object file.
bfd/
* elf-nacl.c (segment_eligible_for_headers): Drop requirement that
some section have SEC_HAS_CONTENTS set. It's not set for
.note.gnu.build-id, and a segment of only read-only SHT_NOBITS
sections is implausible and not really supportable anyway.
This removes the DT_PPC_TLSOPT/DT_PPC64_TLSOPT dynamic tag and replaces
it with DT_PPC_OPT/DT_PPC64_OPT tag to provide the same functionality
and more. This isn't backwards compatible, but the TLSOPT tag hasn't
been used since the tls optimisation support was never submitted to
glibc.
/include/elf/
* ppc.h (DT_PPC_TLSOPT): Delete.
(DT_PPC_OPT, PPC_OPT_TLS): Define.
* ppc64.h (DT_PPC64_TLSOPT): Delete.
(DT_PPC64_OPT, PPC64_OPT_TLS, PPC64_OPT_MULTI_TOC): Define.
bfd/
* elf32-ppc.c (ppc_elf_size_dynamic_sections): Use new DT_PPC_OPT
tag to specify tls optimisation.
* elf64-ppc.c (ppc64_elf_size_dynamic_sections): Likewise.
(ppc64_elf_finish_dynamic_sections): Specify whether multiple
toc pointers are used via DT_PPC64_OPT.
binutils/
* readelf.c (get_ppc_dynamic_type): Replace PPC_TLSOPT with PPC_OPT.
(get_ppc64_dynamic_type): Replace PPC64_TLSOPT with PPC64_OPT.
The toc pointer save slot changes on ELFv2 from 40(1) to 24(1).
* elf64-ppc.c (STK_LR, STK_TOC, STK_LINKER): Define.
(savegpr0_tail, restgpr0_tail, savefpr0_tail, restfpr0_tail)
build_plt_stub, build_tls_get_addr_stub, ppc_build_one_stub,
ppc64_elf_relocate_section): Use new defines.
An ELFv2 PLT entry is simply the address of the target function rather
than three (or two) words to specify entry, toc and static chain. PLT
call stubs are correspondingly simpler and need no thread safety
barrier. The glink resolver stub and branch table also is simplified,
a change that could be applied to ELFv1 too, but isn't as yet.
* elf64-ppc.c (PLT_ENTRY_SIZE, PLT_INITIAL_ENTRY_SIZE): Add htab
parameter and adjust for ELFv2. Update all uses.
(PLT_CALL_STUB_SIZE): Delete.
(ppc64_elf_get_synthetic_symtab): Support new glink layout.
(allocate_dynrelocs): Likewise.
(plt_stub_size, build_plt_stub): Adjust for ELFv2.
(get_r2off): Return 0 for ELFv2 -R.
(ppc_build_one_stub, ppc_size_one_stub): Adjust for ELFv2.
(ppc64_elf_size_stubs): Likewise.
(ppc64_elf_build_stubs): Add new ELFv2 glink.
This defines the ELF symbol st_other field used to encode the number
of instructions between a function "global entry" and its "local entry",
and adds support related to the local entry offset.
include/elf/
* ppc64.h (STO_PPC64_LOCAL_BIT, STO_PPC64_LOCAL_MASK): Define.
(ppc64_decode_local_entry, ppc64_encode_local_entry): New functions.
(PPC64_LOCAL_ENTRY_OFFSET, PPC64_SET_LOCAL_ENTRY_OFFSET): Define.
bfd/
* elf64-ppc.c (struct ppc_stub_hash_entry): Add "other".
(stub_hash_newfunc): Init new ppc_stub_hash_entry field, and one
we forgot, "plt_ent".
(ppc64_elf_add_symbol_hook): Check ELFv1 objects don't have
st_other bits only valid in ELFv2.
(ppc64_elf_merge_symbol_attribute): New function.
(ppc_type_of_stub): Add local_off param to test branch range.
(ppc_build_one_stub): Adjust destinations for ELFv2 locals.
(ppc_size_one_stub, toc_adjusting_stub_needed): Similarly.
(ppc64_elf_size_stubs): Pass local_off to ppc_type_of_stub.
Set "other" field.
(ppc64_elf_relocate_section): Adjust destination for ELFv2 local
calls.
gas/
* config/tc-ppc.c (md_pseudo_table): Add .localentry.
(ppc_elf_localentry): New function.
(ppc_force_relocation): Force relocs on all branches to localenty
symbols.
(ppc_fix_adjustable): Don't reduce such symbols to section+offset.
binutils/
* readelf.c (get_ppc64_symbol_other): New function.
(get_symbol_other): Use it for EM_PPC64.
Defines bits in ELF e_flags to differentiate ELFv2 objects from ELFv2,
adds .abiversion directive to explicitly choose the ABI, and code to
check and automatically select ABI.
include/elf/
* ppc64.h (EF_PPC64_ABI): Define.
bfd/
* elf64-ppc.c (abiversion, set_abiversion): New functions.
(ppc64_elf_get_synthetic_symtab): Handle ELFv2 objects without .opd.
(struct ppc_link_hash_table): Add opd_abi.
(ppc64_elf_check_relocs): Check no .opd with ELFv2.
(ppc64_elf_merge_private_bfd_data): New function.
(ppc64_elf_print_private_bfd_data): New function.
(ppc64_elf_tls_setup): Set htab->opd_abi.
(ppc64_elf_size_dynamic_sections): Don't emit OPD related dynamic
tags for ELFv2.
(ppc_build_one_stub): Use R_PPC64_IRELATIVE for ELFv2 ifunc.
(ppc64_elf_finish_dynamic_symbol): Likewise
binutils/
* readelf.c (get_machine_flags): Display ABI version for EM_PPC64.
gas/
* config/tc-ppc.c: Include elf/ppc64.h.
(ppc_abiversion): New variable.
(md_pseudo_table): Add .abiversion.
(ppc_elf_abiversion, ppc_elf_end): New functions.
* config/tc-ppc.h (md_end): Define.
This change is to support the new ELFv2 ABI, which uses the value in
r12 on function entry to calculate the got/toc pointer.
bfd/
* elf64-ppc.c (build_plt_stub): Switch stubs to use r11 as base
reg and r12 as destination.
(ppc_build_one_stub): Likewise.
(ppc64_elf_build_stubs): Likewise for glink.
ld/testsuite/
* ld-powerpc/tls.s: Add proper .opd entry for _start.
* ld-powerpc/tlstoc.s: Likewise.
* ld-powerpc/relbrlt.d: Update for changed stubs.
* ld-powerpc/tls.d: Update for changed stubs and _start .opd entry.
* ld-powerpc/tls.g: Likewise.
* ld-powerpc/tlsexe.d: Likewise.
* ld-powerpc/tlsexe.g: Likewise.
* ld-powerpc/tlsexe.r: Likewise.
* ld-powerpc/tlsexetoc.d: Likewise.
* ld-powerpc/tlsexetoc.g: Likewise.
* ld-powerpc/tlsexetoc.r: Likewise.
* ld-powerpc/tlsso.d: Likewise.
* ld-powerpc/tlsso.g: Likewise.
* ld-powerpc/tlsso.r: Likewise.
* ld-powerpc/tlstoc.d: Likewise.
* ld-powerpc/tlstoc.g: Likewise.
* ld-powerpc/tlstocso.d: Likewise.
* ld-powerpc/tlstocso.g: Likewise.
* ld-powerpc/tlstocso.r: Likewise.
This changes the behaviour of @h and @ha on PowerPC64 to report errors
on 32-bit overflow. The motivation for this change is that on
PowerPC64, most uses of @h and @ha modifiers and their corresponding
relocations are to build up 32-bit offsets. We'd like to know when
such offsets overflow. Only rarely do people use @h or @ha with the
high 32-bit modifiers to build a 64-bit constant. Those uses will now
need to use two new modifiers, @high and @higha, if the constant isn't
known at assembly time. For now, we won't report overflow at assembly
time..
This also fixes an error when applying some of the HIGHER and HIGHEST
relocations.
include/elf/
* ppc64.h (R_PPC64_ADDR16_HIGH, R_PPC64_ADDR16_HIGHA,
R_PPC64_TPREL16_HIGH, R_PPC64_TPREL16_HIGHA,
R_PPC64_DTPREL16_HIGH, R_PPC64_DTPREL16_HIGHA): New.
(IS_PPC64_TLS_RELOC): Match new tls relocs.
bfd/
* reloc.c (BFD_RELOC_PPC64_ADDR16_HIGH, BFD_RELOC_PPC64_ADDR16_HIGHA,
BFD_RELOC_PPC64_TPREL16_HIGH, BFD_RELOC_PPC64_TPREL16_HIGHA,
BFD_RELOC_PPC64_DTPREL16_HIGH, BFD_RELOC_PPC64_DTPREL16_HIGHA): New.
* elf64-ppc.c (ppc64_elf_howto_raw): Add entries for new relocs.
Make all _HA and _HI relocs report signed overflow.
(ppc64_elf_reloc_type_lookup): Handle new relocs.
(must_be_dyn_reloc, ppc64_elf_check_relocs): Likewise.
(dec_dynrel_count, ppc64_elf_relocate_section): Likewise.
(ppc64_elf_relocate_section): Don't apply 0x8000 adjust to
R_PPC64_TPREL16_HIGHER, R_PPC64_TPREL16_HIGHEST,
R_PPC64_DTPREL16_HIGHER, and R_PPC64_DTPREL16_HIGHEST.
* libbfd.h: Regenerate.
* bfd-in2.h: Regenerate.
gas/
* config/tc-ppc.c (SEX16): Don't mask.
(REPORT_OVERFLOW_HI): Define as zero.
(ppc_elf_suffix): Support @high, @higha, @dtprel@high, @dtprel@higha,
@tprel@high, and @tprel@higha modifiers.
(md_assemble): Ignore X_unsigned when applying 16-bit insn fields.
Add (disabled) code to check @h and @ha reloc overflow for powerpc64.
Handle new relocs.
(md_apply_fix): Similarly.
elfcpp/
* powerpc.h (R_PPC64_ADDR16_HIGH, R_PPC64_ADDR16_HIGHA,
R_PPC64_TPREL16_HIGH, R_PPC64_TPREL16_HIGHA,
R_PPC64_DTPREL16_HIGH, R_PPC64_DTPREL16_HIGHA): Define.
gold/
* powerpc.cc (Target_powerpc::Scan::check_non_pic): Handle new relocs.
(Target_powerpc::Scan::global, local): Likewise.
(Target_powerpc::Relocate::relocate): Likewise. Check for overflow
on all ppc64 @h and @ha relocs.
There's no real need to emit these always: They're needed only if we
indeed want to emit a localized symbol. Hence defer emission until we
at least did the basic early checks that would lead to no such symbol
getting emitted. This in particular avoids emitting such a symbol in
the majority of (if not all) "ld -r" cases.
I hope my set of cross build tests caught all the test cases needing
adjustment - please forgive if I missed a few.
bfd/
2013-10-29 Jan Beulich <jbeulich@suse.com>
* elflink.c (struct elf_outext_info): Add field file_sym_done.
(bfd_elf_final_link): Initialize new field. Move fake STT_FILE
symbol emission from here ...
(elf_link_output_extsym): ... to here.
gas/testsuite/
2013-10-29 Jan Beulich <jbeulich@suse.com>
* gas/microblaze/relax_size.elf: Drop expectation of no longer
present STT_FILE symbol.
* gas/microblaze/relax_size2.elf: Likewise.
ld/testsuite/
2013-10-29 Jan Beulich <jbeulich@suse.com>
* ld-cris/tls-e-tpoffcomm1.d: Drop expectation of no longer
present STT_FILE symbol.
* ld-mmix/bpo-18.d: Likewise.
* ld-mmix/bpo-22.d: Likewise.
* ld-mmix/greg-6.d: Likewise.
* ld-mmix/greg-7.d: Likewise.
* ld-mmix/loc4.d: Likewise.
* ld-mmix/local1.d: Likewise.
* ld-mmix/local3.d: Likewise.
* ld-mmix/local5.d: Likewise.
* ld-mmix/local7.d: Likewise.
* ld-mmix/loct-1.d: Likewise.
* ld-sh/sh64/abi32.xd: Likewise.
* ld-sh/sh64/abi64.xd: Likewise.
* ld-sh/sh64/cmpct1.xd: Likewise.
* ld-sh/sh64/crange1.rd: Likewise.
* ld-sh/sh64/crange2.rd: Likewise.
* ld-sh/sh64/crange3-cmpct.rd: Likewise.
* ld-sh/sh64/crange3-media.rd: Likewise.
* ld-sh/sh64/crange3.rd: Likewise.
* ld-sh/sh64/crangerel1.rd: Likewise.
* ld-sh/sh64/crangerel2.rd: Likewise.
* ld-sh/sh64/mix1.xd: Likewise.
* ld-sh/sh64/mix2.xd: Likewise.
* ld-sh/sh64/shdl32.xd: Likewise.
* ld-sh/sh64/shdl64.xd: Likewise.
* dwarf2.c (lookup_address_in_line_info_table): Change return type
to be the range of addresses covered by the table.
(comp_unit_find_nearest_line): Likewise.
(find_line): Search all CUs. Select the one that matches and
covers the smallest address range.
* dwarf2.c (lookup_address_in_line_info_table): Change return type
to be the range of addresses covered by the table.
(comp_unit_find_nearest_line): Likewise.
(find_line): Search all CUs. Select the one that matches and
covers the smallest address range.
Here's another small patch to lay the groundwork for the git
conversion. This one updates the BFD and binutils documentation for
the move.
bfd:
* doc/bfdint.texi (BFD generated files): Mention git, not cvs.
binutils:
* MAINTAINERS: Mention git, not cvs.
* README: Mention git, not cvs.
* elfxx-mips.c (mips_elf_obj_tdata): Add abi_msa_bfd.
(mips_elf_merge_obj_attributes): Set abi_msa_bfd to the first object
file that has a Tag_GNU_MIPS_ABI_MSA attribute.
Merge Tag_GNU_MIPS_ABI_MSA attributes.
* elfxx-mips.c (mips_use_local_got_p): New function.
(mips_elf_count_got_symbols, mips_elf_calculate_relocation): Use it.
(_bfd_mips_elf_check_relocs): Set pointer_equality_needed for
GOT and absolute references.
ld/testsuite/
* ld-mips-elf/pic-and-nonpic-6-n32.ad,
ld-mips-elf/pic-and-nonpic-6-n32.dd,
ld-mips-elf/pic-and-nonpic-6-n32.gd,
ld-mips-elf/pic-and-nonpic-6-n32.nd,
ld-mips-elf/pic-and-nonpic-6-n32.rd,
ld-mips-elf/pic-and-nonpic-6-n64.ad,
ld-mips-elf/pic-and-nonpic-6-n64.dd,
ld-mips-elf/pic-and-nonpic-6-n64.gd,
ld-mips-elf/pic-and-nonpic-6-n64.nd,
ld-mips-elf/pic-and-nonpic-6-n64.rd,
ld-mips-elf/pic-and-nonpic-6-o32.ad,
ld-mips-elf/pic-and-nonpic-6-o32.dd,
ld-mips-elf/pic-and-nonpic-6-o32.gd,
ld-mips-elf/pic-and-nonpic-6-o32.nd,
ld-mips-elf/pic-and-nonpic-6-o32.rd: Fix symbol value of extf4.
No longer expect extf3, extf4 and extd2 to be in the global GOT.
* bfd-in2.h: Rebuild.
* opncls.c (bfd_get_alt_debug_link_info): Change type of
buildid_len to bfd_size_type.
gdb
* dwarf2read.c (dwarf2_get_dwz_file): Update for type change in
bfd_get_alt_debug_link_info.
This patch fixes gdb PR symtab/15597.
The bug is that the .gnu_debugaltlink section includes the build-id of
the alt file, but gdb does not use it.
This patch fixes the problem by changing gdb to do what it ought to
always have done: verify the build id of the file found using the
filename in .gnu_debugaltlink; and if that does not match, try to find
the correct debug file using the build-id and debug-file-directory.
This patch touches BFD. Previously, gdb had its own code for parsing
.gnu_debugaltlink; I changed it to use the BFD functions after those
were introduced. However, the BFD functions are incorrect -- they
assume that .gnu_debugaltlink is formatted like .gnu_debuglink.
However, it it is not. Instead, it consists of a file name followed
by the build-id -- no alignment, and the build-id is not a CRC.
Fixing this properly is a bit of a pain. But, because
separate_alt_debug_file_exists just has a FIXME for the build-id case,
I did not fix it properly. Instead I introduced a hack. This leaves
BFD working just as well as it did before my patch.
I'm willing to do something better here but I could use some guidance
as to what. It seems that the build-id code in BFD is largely punted
on.
FWIW gdb is the only user of bfd_get_alt_debug_link_info outside of
BFD itself.
I moved the build-id logic out of elfread.c and into a new file.
This seemed cleanest to me.
Writing a test case was a bit of a pain. I added a couple new
features to the DWARF assembler to handle this.
Built and regtested on x86-64 Fedora 18.
* bfd-in2.h: Rebuild.
* opncls.c (bfd_get_alt_debug_link_info): Add buildid_len
parameter. Change type of buildid_out. Update.
(get_alt_debug_link_info_shim): New function.
(bfd_follow_gnu_debuglink): Use it.
* Makefile.in (SFILES): Add build-id.c.
(HFILES_NO_SRCDIR): Add build-id.h.
* build-id.c: New file, largely from elfread.c. Modified
most functions.
* build-id.h: New file.
* dwarf2read.c (dwarf2_get_dwz_file): Update for change to
bfd_get_alt_debug_link_info. Verify dwz file's build-id.
Search for dwz file using build-id.
* elfread.c (build_id_bfd_get, build_id_verify)
(build_id_to_debug_filename, find_separate_debug_file): Remove.
* gdb.dwarf2/dwzbuildid.exp: New file.
* lib/dwarf.exp (Dwarf::_section): Add "flags" and "type"
parameters.
(Dwarf::_defer_output): Change "section" parameter to
"section_spec"; update.
(Dwarf::gnu_debugaltlink, Dwarf::_note, Dwarf::build_id): New
procs.
Chung-Lin Tang
Alan Modra
H.J. Lu
Jack Carter
Jan Kratochvil
Rainer Orth
Sandra Loosemore
Nick Clifton
Christophe Lyon
Ma Jiang
Tristan Gingold
Tom Tromey
Asmwarrior
Ilya Tocar
Pierre Muller
Pierre Muller
Andreas Schwab
Kuan-Lin Chen
Will Newton
Cory Fields
Roland McGrath
Yufeng Zhang
DJ Delorie
Jan Beulich
Hans-Peter Nilsson
Chao-ying Fu
Richard Sandiford
Roland McGrath
Sergio Durigan Junior