Fixes implicit function declaration
error in gdb/procfs.c:4927 about undeclared
make_cleanup_close().
gdb/ChangeLog:
PR build/18843
* procfs.c: Include "filestuff.h".
With "maint set target-non-stop on" we get:
@@ -66,13 +66,16 @@ Continuing.
interrupt
(gdb) PASS: gdb.base/interrupt-noterm.exp: interrupt
-Program received signal SIGINT, Interrupt.
-PASS: gdb.base/interrupt-noterm.exp: inferior received SIGINT
-testcase src/gdb/testsuite/gdb.base/interrupt-noterm.exp completed in 0 seconds
+[process 12119] #1 stopped.
+0x0000003615ebc6d0 in __nanosleep_nocancel () at ../sysdeps/unix/syscall-template.S:81
+81 T_PSEUDO (SYSCALL_SYMBOL, SYSCALL_NAME, SYSCALL_NARGS)
+FAIL: gdb.base/interrupt-noterm.exp: inferior received SIGINT (timeout)
+testcase src/gdb/testsuite/gdb.base/interrupt-noterm.exp completed in 10 seconds
That is, we get "[$thread] #1 stopped" instead of SIGINT.
The issue is that we don't currently distinguish send
"interrupt/ctrl-c" to target terminal vs "stop/pause" thread well;
both cases go through "target_stop".
And then, the native Linux backend (linux-nat.c) implements
target_stop with SIGSTOP in non-stop mode, and SIGINT in all-stop
mode. Since "maint set target-non-stop on" forces the backend to be
always running in non-stop mode, even though the user-visible behavior
is "set non-stop" is "off", "interrupt" causes a SIGSTOP instead of
the SIGINT the test expects.
Fix this by introducing a target_interrupt method to use in the
"interrupt/ctrl-c" case, so "set non-stop off" can always work the
same irrespective of "maint set target-non-stop on/off". I'm
explictly considering changing the "set non-stop on" behavior as out
of scope here.
Most of the patch is an across-the-board rename of to_stop hook
implementations to to_interrupt. The only targets where something
more than a rename is being done are linux-nat.c and remote.c, which
are the only targets that support async, and thus are the only ones
the core side calls target_stop on.
gdb/ChangeLog:
2015-08-07 Pedro Alves <palves@redhat.com>
* darwin-nat.c (darwin_stop): Rename to ...
(darwin_interrupt): ... this.
(_initialize_darwin_inferior): Adjust.
* gnu-nat.c (gnu_stop): Delete.
(gnu_target): Don't install gnu_stop.
* inf-ptrace.c (inf_ptrace_stop): Rename to ...
(inf_ptrace_interrupt): ... this.
(inf_ptrace_target): Adjust.
* infcmd.c (interrupt_target_1): Use target_interrupt instead of
target_stop.
* linux-nat (linux_nat_stop): Rename to ...
(linux_nat_interrupt): ... this.
(linux_nat_stop): Reimplement.
(linux_nat_add_target): Install linux_nat_interrupt.
* nto-procfs.c (nto_interrupt_twice): Rename to ...
(nto_handle_sigint_twice): ... this.
(nto_interrupt): Rename to ...
(nto_handle_sigint): ... this. Call target_interrupt instead of
target_stop.
(procfs_wait): Adjust.
(procfs_stop): Rename to ...
(procfs_interrupt): ... this.
(init_procfs_targets): Adjust.
* procfs.c (procfs_stop): Rename to ...
(procfs_interrupt): ... this.
(procfs_target): Adjust.
* remote-m32r-sdi.c (m32r_stop): Rename to ...
(m32r_interrupt): ... this.
(init_m32r_ops): Adjust.
* remote-sim.c (gdbsim_stop_inferior): Rename to ...
(gdbsim_interrupt_inferior): ... this.
(gdbsim_stop): Rename to ...
(gdbsim_interrupt): ... this.
(gdbsim_cntrl_c): Adjust.
(init_gdbsim_ops): Adjust.
* remote.c (sync_remote_interrupt): Adjust comments.
(remote_stop_as): Rename to ...
(remote_interrupt_as): ... this.
(remote_stop): Adjust comment.
(remote_interrupt): New function.
(init_remote_ops): Install remote_interrupt.
* target.c (target_interrupt): New function.
* target.h (struct target_ops) <to_interrupt>: New field.
(target_interrupt): New declaration.
* windows-nat.c (windows_stop): Rename to ...
(windows_interrupt): ... this.
* target-delegates.c: Regenerate.
This commit does most of the mechanical removal. IOW, the easy part.
procfs.c isn't touched beyond removing a couple obvious bits that are
guarded by a couple macros defined in config/alpha/nm-osf3.h. Going
beyond that for procfs.c & co would be a harder excision that
potentially affects Solaris.
Some comments in the generic alpha code ABIs that may still be
relevant and I wouldn't know what to do with them. That can always be
done on a separate pass, preferably by someone who can test on alpha.
A couple other spots have references to OSF/Tru64 and related files
being removed, but it felt like removing them would make things worse,
not better. We can revisit those when we next need to touch that
code.
I didn't remove a reference to osf in testsuite/lib/future.exp, as I
believe that code is imported from DejaGNU.
Built and tested on x86_64 Fedora 20, with --enable-targets=all.
Tested that building for --target=alpha-osf3 on x86_64 Fedora 20
fails with:
checking for default auto-load directory... $debugdir:$datadir/auto-load
checking for default auto-load safe-path... $debugdir:$datadir/auto-load
*** Configuration alpha-unknown-osf3 is obsolete.
*** Support has been REMOVED.
make[1]: *** [configure-gdb] Error 1
make[1]: Leaving directory `build-osf'
make: *** [all] Error 2
gdb/
2014-10-17 Pedro Alves <palves@redhat.com>
* Makefile.in (ALL_64_TARGET_OBS): Remove alpha-osf1-tdep.o.
(HFILES_NO_SRCDIR): Remove config/alpha/nm-osf3.h.
(ALLDEPFILES): Remove alpha-nat.c, alpha-osf1-tdep.c and
solib-osf.c.
* NEWS: Mention that support for alpha*-*-osf* has been removed.
* ada-lang.h [__alpha__ && __osf__]
(ADA_KNOWN_RUNTIME_FILE_NAME_PATTERNS): Delete.
* alpha-nat.c, alpha-osf1-tdep.c: Delete files.
* alpha-tdep.c (alpha_gdbarch_init): Remove reference to
GDB_OSABI_OSF1.
* config/alpha/alpha-osf3.mh, config/alpha/nm-osf3.h: Delete
files.
* config/djgpp/fnchange.lst (config/alpha/alpha-osf1.mh)
(config/alpha/alpha-osf2.mh, config/alpha/alpha-osf3.mh): Delete.
* configure: Regenerate.
* configure.ac: Remove references to osf.
* configure.host: Handle alpha*-*-osf* in the obsolete hosts
section. Remove all other references to osf.
* configure.tgt: Add alpha*-*-osf* to the obsolete targets section.
Remove all other references to osf.
* dec-thread.c: Delete file.
* defs.h (GDB_OSABI_OSF1): Delete.
* inferior.h (START_INFERIOR_TRAPS_EXPECTED): New unconditionally
defined.
* osabi.c (gdb_osabi_names): Delete "OSF/1".
* procfs.c (procfs_debug_inferior) [PROCFS_DONT_TRACE_FAULTS]:
Delete code.
(unconditionally_kill_inferior)
[PROCFS_NEED_CLEAR_CURSIG_FOR_KILL]: Delete code.
* solib-osf.c: Delete file.
gdb/testsuite/
2014-10-17 Pedro Alves <palves@redhat.com>
* gdb.base/callfuncs.exp: emove references to osf.
* gdb.base/sigall.exp: Likewise.
* gdb.gdb/selftest.exp: Likewise.
* gdb.hp/gdb.base-hp/callfwmall.exp: Likewise.
* gdb.mi/non-stop.c: Likewise.
* gdb.mi/pthreads.c: Likewise.
* gdb.reverse/sigall-precsave.exp: Likewise.
* gdb.reverse/sigall-reverse.exp: Likewise.
* gdb.threads/pthreads.c: Likewise.
* gdb.threads/pthreads.exp: Likewise.
gdb/doc/
2014-10-17 Pedro Alves <palves@redhat.com>
* gdb.texinfo (Ada Tasks and Core Files): Delete mention of Tru64.
(SVR4 Process Information): Delete mention of OSF/1.
When GDB wants to sync the thread list with the target's (e.g., due to
"info threads"), it calls update_thread_list:
update_thread_list (void)
{
prune_threads ();
target_find_new_threads ();
update_threads_executing ();
}
And then prune_threads does:
prune_threads (void)
{
struct thread_info *tp, *next;
for (tp = thread_list; tp; tp = next)
{
next = tp->next;
if (!thread_alive (tp))
delete_thread (tp->ptid);
}
}
Calling thread_live on each thread one by one is expensive.
E.g., on Linux, it ends up doing kill(SIG0) once for each thread. Not
a big deal, but still a bunch of syscalls...
With the remote target, it's cumbersome. That thread_alive call ends
up generating one T packet per thread:
Sending packet: $Tp2141.2150#82...Packet received: OK
Sending packet: $Tp2141.214f#b7...Packet received: OK
Sending packet: $Tp2141.2141#82...Packet received: OK
Sending packet: $qXfer:threads:read::0,fff#03...Packet received: l<threads>\n<thread id="p2141.2141" core="2"/>\n<thread id="p2141.214f" core="1"/>\n<thread id="p2141.2150" core="2"/>\n</threads>\n
That seems a bit silly when target_find_new_threads method
implementations will always fetch the whole current set of target
threads, and then add those that are not in GDB's thread list, to
GDB's thread list.
This patch thus pushes down the responsibility of pruning dead threads
to the target_find_new_threads method instead, so a target may
implement pruning dead threads however it wants.
Once we do that, target_find_new_threads becomes a misnomer, so the
patch renames it to target_update_thread_list.
The patch doesn't attempt to do any optimization to any target yet.
It simply exports prune_threads, and makes all implementations of
target_update_thread_list call that. It's meant to be a no-op.
gdb/
2014-10-15 Pedro Alves <palves@redhat.com>
* ada-tasks.c (print_ada_task_info, task_command_1): Adjust.
* bsd-uthread.c (bsd_uthread_find_new_threads): Rename to ...
(bsd_uthread_update_thread_list): ... this. Call prune_threads.
(bsd_uthread_target): Adjust.
* corelow.c (core_open): Adjust.
* dec-thread.c (dec_thread_find_new_threads): Update comment.
(dec_thread_update_thread_list): New function.
(init_dec_thread_ops): Adjust.
* gdbthread.h (prune_threads): New declaration.
* linux-thread-db.c (thread_db_find_new_threads): Rename to ...
(thread_db_update_thread_list): ... this. Call prune_threads.
(init_thread_db_ops): Adjust.
* nto-procfs.c (procfs_find_new_threads): Rename to ...
(procfs_update_thread_list): ... this. Call prune_threads.
(procfs_attach, procfs_create_inferior, init_procfs_targets):
Adjust.
* obsd-nat.c (obsd_find_new_threads): Rename to ...
(obsd_update_thread_list): ... this. Call prune_threads.
(obsd_add_target): Adjust.
* procfs.c (procfs_target): Adjust.
(procfs_notice_thread): Update comment.
(procfs_find_new_threads): Rename to ...
(procfs_update_thread_list): ... this. Call prune_threads.
* ravenscar-thread.c (ravenscar_update_inferior_ptid): Update
comment.
(ravenscar_wait): Adjust.
(ravenscar_find_new_threads): Rename to ...
(ravenscar_update_thread_list): ... this. Call prune_threads.
(init_ravenscar_thread_ops): Adjust.
* record-btrace.c (record_btrace_find_new_threads): Rename to ...
(record_btrace_update_thread_list): ... this. Adjust comment.
(init_record_btrace_ops): Adjust.
* remote.c (remote_threads_info): Rename to ...
(remote_update_thread_list): ... this. Call prune_threads.
(remote_start_remote, extended_remote_attach_1, init_remote_ops):
Adjust.
* sol-thread.c (check_for_thread_db): Adjust.
(sol_find_new_threads_callback): Rename to ...
(sol_update_thread_list_callback): ... this.
(sol_find_new_threads): Rename to ...
(sol_update_thread_list): ... this. Call prune_threads. Adjust.
(sol_get_ada_task_ptid, init_sol_thread_ops): Adjust.
* target-delegates.c: Regenerate.
* target.c (target_find_new_threads): Rename to ...
(target_update_thread_list): ... this.
* target.h (struct target_ops): Rename to_find_new_threads field
to to_update_thread_list.
(target_find_new_threads): Rename to ...
(target_update_thread_list): ... this.
* thread.c (prune_threads): Make extern.
(update_thread_list): Adjust.
Now that all instances of the regset_from_core_section gdbarch method
have been replaced by the new iterator method, delete the obsolete
method from the gdbarch interface. Adjust all invocations and
references to it.
gdb/ChangeLog:
* gdbarch.sh (regset_from_core_section): Remove gdbarch method.
* gdbarch.c: Regenerate.
* gdbarch.h: Likewise.
* corelow.c (sniff_core_bfd): Drop presence check for deleted
gdbarch method 'regset_from_core_section'.
(get_core_register_section): Remove handling for the case that
regset == NULL and regset_from_core_section is defined.
(get_core_registers): Drop check for deleted method.
* procfs.c (procfs_do_thread_registers): Adjust comment.
The IRIX support wants to set a breakpoint to be hit when the startup
phase is complete, which is where shared libraries have been mapped
in. AFAIU, for most IRIX ports, that location is the entry point.
For MIPS IRIX however, GDB needs to set a breakpoint earlier, in
__dbx_link, as explained by:
#ifdef SYS_syssgi
/* On mips-irix, we need to stop the inferior early enough during
the startup phase in order to be able to load the shared library
symbols and insert the breakpoints that are located in these shared
libraries. Stopping at the program entry point is not good enough
because the -init code is executed before the execution reaches
that point.
So what we need to do is to insert a breakpoint in the runtime
loader (rld), more precisely in __dbx_link(). This procedure is
called by rld once all shared libraries have been mapped, but before
the -init code is executed. Unfortuantely, this is not straightforward,
as rld is not part of the executable we are running, and thus we need
the inferior to run until rld itself has been mapped in memory.
For this, we trace all syssgi() syscall exit events. Each time
we detect such an event, we iterate over each text memory maps,
get its associated fd, and scan the symbol table for __dbx_link().
When found, we know that rld has been mapped, and that we can insert
the breakpoint at the symbol address. Once the dbx_link() breakpoint
has been inserted, the syssgi() notifications are no longer necessary,
so they should be canceled. */
proc_trace_syscalls_1 (pi, SYS_syssgi, PR_SYSEXIT, FLAG_SET, 0);
#endif
The loop in irix_solib_create_inferior_hook then runs until whichever
breakpoint is hit first, the one set by solib-irix.c or the one set by
procfs.c.
Note the comment in disable_break talks about __dbx_init, but I think
that's a typo for __dbx_link:
- /* Note that it is possible that we have stopped at a location that
- is different from the location where we inserted our breakpoint.
- On mips-irix, we can actually land in __dbx_init(), so we should
- not check the PC against our breakpoint address here. See procfs.c
- for more details. */
This looks very much like referring to the loop in
irix_solib_create_inferior_hook stopping at __dbx_link instead of at
the entry point.
What this patch does is convert these deprecated raw breakpoints to
standard solib_event breakpoints. When the first solib-event
breakpoint is hit, we delete all solib-event breakpoints. We do that
in the so_ops->handle_event hook.
This allows getting rid of the loop in irix_solib_create_inferior_hook
completely, which should allow properly handling signals and other
events in the early startup phase, like in SVR4.
Built on x86_64 Fedora 20 with --enable-targets=all (builds
solib-irix.c).
Joel tested that with an earlier version of this patch "info shared"
after starting a program gave the same list of shared libraries as
before.
gdb/ChangeLog:
2014-09-12 Pedro Alves <palves@redhat.com>
* breakpoint.c (remove_solib_event_breakpoints_at_next_stop)
(create_and_insert_solib_event_breakpoint): New functions.
* breakpoint.h (create_and_insert_solib_event_breakpoint)
(remove_solib_event_breakpoints_at_next_stop): New declarations.
* procfs.c (dbx_link_bpt_addr, dbx_link_bpt): Delete globals.
(remove_dbx_link_breakpoint): Delete function.
(insert_dbx_link_bpt_in_file): Use
create_and_insert_solib_event_breakpoint instead of
deprecated_insert_raw_breakpoint.
(procfs_wait): Don't check whether we hit __dbx_link here.
(procfs_mourn_inferior): Don't delete the __dbx_link breakpoint
here.
* solib-irix.c (base_breakpoint): Delete global.
(disable_break): Delete function.
(enable_break): Use create_solib_event_breakpoint
instead of deprecated_insert_raw_breakpoint.
(irix_solib_handle_event): New function.
(irix_solib_create_inferior_hook): Don't run the target or disable
the mapping-complete breakpoint here.
(_initialize_irix_solib): Install irix_solib_handle_event as
so_ops->handle_event hook.
This commit moves the inclusion of errno.h to common-defs.h and
removes all other inclusions. Note that prior to this commit
server.h included errno.h protected by "#ifdef HAVE_ERRNO_H".
This protection was added with the Windows CE port, which is
currently broken. Since no other platform needs this, I have
removed the protection and the configury to support it.
gdb/
2014-08-07 Gary Benson <gbenson@redhat.com>
* common/common-defs.h: Include errno.h.
* defs.h: Do not include errno.h.
* ada-typeprint.c: Likewise.
* c-typeprint.c: Likewise.
* core-regset.c: Likewise.
* corefile.c: Likewise.
* corelow.c: Likewise.
* event-loop.c: Likewise.
* f-typeprint.c: Likewise.
* gnu-nat.c: Likewise.
* go32-nat.c: Likewise.
* i386gnu-nat.c: Likewise.
* m2-typeprint.c: Likewise.
* nat/linux-btrace.c: Likewise.
* p-typeprint.c: Likewise.
* procfs.c: Likewise.
* remote-sim.c: Likewise.
* rs6000-nat.c: Likewise.
* target.c: Likewise.
* typeprint.c: Likewise.
* ui-file.c: Likewise.
* valops.c: Likewise.
* valprint.c: Likewise.
gdb/gdbserver/
2014-08-07 Gary Benson <gbenson@redhat.com>
* configure.ac (AC_CHECK_HEADERS): Remove errno.h.
* configure: Regenerate.
* config.in: Likewise.
* server.h: Do not include errno.h.
* event-loop.c: Likewise.
* hostio-errno.c: Likewise.
* linux-low.c: Likewise.
* remote-utils.c: Likewise.
* spu-low.c: Likewise.
* utils.c: Likewise.
* gdbreplay.c: Unconditionally include errno.h.
This patch cleans up some minor inconsistencies in target delegation.
It's primary purpose is to avoid confusion in the code. A few spots
were checking the "beneath" target; however this can only be NULL for
the dummy target, so such tests are not needed. Some other spots were
iterating over the beneath targets, looking for a method
implementation. This is not needed for methods handled by
make-target-delegates, as there is always an implementation.
2014-07-18 Tom Tromey <tromey@redhat.com>
PR gdb/17130:
* spu-multiarch.c (spu_region_ok_for_hw_watchpoint)
(spu_fetch_registers, spu_store_registers, spu_xfer_partial)
(spu_search_memory, spu_mourn_inferior): Simplify delegation.
* linux-thread-db.c (thread_db_pid_to_str): Always delegate.
* windows-nat.c (windows_xfer_partial): Always delegate.
* record-btrace.c (record_btrace_xfer_partial): Simplify
delegation.
(record_btrace_fetch_registers, record_btrace_store_registers)
(record_btrace_prepare_to_store, record_btrace_resume)
(record_btrace_wait, record_btrace_find_new_threads)
(record_btrace_thread_alive): Likewise.
* procfs.c (procfs_xfer_partial): Always delegate.
* corelow.c (core_xfer_partial): Always delegate.
* sol-thread.c (sol_find_new_threads): Simplify delegation.
The various make_corefile_notes implementations for gdbarch as well as target
currently make an xfree cleanup on the data they return. This causes problems
when trying to put a TRY_CATCH around the make_corefile_notes call.
Specifically, we get a stale cleanup error in restore_my_cleanups.
Omit the make_cleanup and have the caller free the memory.
gdb/
* fbsd-nat.c (fbsd_make_corefile_notes): Remove make_cleanup call.
* gcore.c (write_gcore_file): Free memory returned from
make_corefile_notes.
* linux-tdep.c (linux_make_corefile_notes): Remove make_cleanup call.
* procfs.c (procfs_make_note_section): Remove make_cleanup call.
This makes a parameter of to_info_proc const and then fixes up some
fallout, including parameters in a couple of gdbarch methods.
I could not test the procfs.c change. I verified it by inspection.
If this causes an error here, it will be trivial to fix.
2014-06-16 Tom Tromey <tromey@redhat.com>
* target.h (struct target_ops) <to_info_proc>: Make parameter
const.
(target_info_proc): Update.
* target.c (target_info_proc): Make "args" const.
* procfs.c (procfs_info_proc): Update.
* linux-tdep.c (linux_info_proc): Update.
(linux_core_info_proc_mappings): Make "args" const.
(linux_core_info_proc): Update.
* gdbarch.sh (info_proc, core_info_proc): Make "args" const.
* gdbarch.c: Rebuild.
* gdbarch.h: Rebuild.
* corelow.c (core_info_proc): Update.
This constifies the "args" argument to the target_ops to_attach
method.
I updated all instances of the method. I could not compile all of
them but I hand-inspected them. In all cases either the argument is
ignored, or it is passed to parse_pid_to_attach. (linux-nat does some
extra stuff, but that one I built...)
If you want to try it on your host of choice, please do so.
The code in parse_pid_to_attach seems a little bogus to me. If there
is a platform with a broken strtoul, we have better methods for fixing
the issue now. However, I left the code as is since it is clearly ok
to do so.
Built and regtested on x86-64 Fedora 20.
2014-06-04 Tom Tromey <tromey@redhat.com>
* procfs.c (procfs_attach): Make "args" const.
* windows-nat.c (windows_attach): Make "args" const.
* nto-procfs.c (procfs_attach): Make "args" const.
* inf-ttrace.c (inf_ttrace_attach): Make "args" const.
* go32-nat.c (go32_attach): Make "args" const.
* gnu-nat.c (gnu_attach): Make "args" const.
* darwin-nat.c (darwin_attach): Make "args" const.
* inf-ptrace.c (inf_ptrace_attach): Make "args" const.
* linux-nat.c (linux_nat_attach): Make "args" const.
* remote.c (extended_remote_attach_1, extended_remote_attach):
Make "args" const.
* target.h (struct target_ops) <to_attach>: Make "args" const.
(find_default_attach): Likewise.
* utils.c (parse_pid_to_attach): Make "args" const.
* utils.h (parse_pid_to_attach): Update.
Move infrun.c declarations out of inferior.h to a new infrun.h file.
Tested by building on:
i686-w64-mingw32, enable-targets=all
x86_64-linux, enable-targets=all
i586-pc-msdosdjgpp
And also grepped the whole tree for each symbol moved to find where
infrun.h might be necessary.
gdb/
2014-05-22 Pedro Alves <palves@redhat.com>
* inferior.h (debug_infrun, debug_displaced, stop_on_solib_events)
(sync_execution, sched_multi, step_stop_if_no_debug, non_stop)
(disable_randomization, enum exec_direction_kind)
(execution_direction, stop_registers, start_remote)
(clear_proceed_status, proceed, resume, user_visible_resume_ptid)
(wait_for_inferior, normal_stop, get_last_target_status)
(prepare_for_detach, fetch_inferior_event, init_wait_for_inferior)
(insert_step_resume_breakpoint_at_sal)
(follow_inferior_reset_breakpoints, stepping_past_instruction_at)
(set_step_info, print_stop_event, signal_stop_state)
(signal_print_state, signal_pass_state, signal_stop_update)
(signal_print_update, signal_pass_update)
(update_signals_program_target, clear_exit_convenience_vars)
(displaced_step_dump_bytes, update_observer_mode)
(signal_catch_update, gdb_signal_from_command): Move
declarations ...
* infrun.h: ... to this new file.
* amd64-tdep.c: Include infrun.h.
* annotate.c: Include infrun.h.
* arch-utils.c: Include infrun.h.
* arm-linux-tdep.c: Include infrun.h.
* arm-tdep.c: Include infrun.h.
* break-catch-sig.c: Include infrun.h.
* breakpoint.c: Include infrun.h.
* common/agent.c: Include infrun.h instead of inferior.h.
* corelow.c: Include infrun.h.
* event-top.c: Include infrun.h.
* go32-nat.c: Include infrun.h.
* i386-tdep.c: Include infrun.h.
* inf-loop.c: Include infrun.h.
* infcall.c: Include infrun.h.
* infcmd.c: Include infrun.h.
* infrun.c: Include infrun.h.
* linux-fork.c: Include infrun.h.
* linux-nat.c: Include infrun.h.
* linux-thread-db.c: Include infrun.h.
* monitor.c: Include infrun.h.
* nto-tdep.c: Include infrun.h.
* procfs.c: Include infrun.h.
* record-btrace.c: Include infrun.h.
* record-full.c: Include infrun.h.
* remote-m32r-sdi.c: Include infrun.h.
* remote-mips.c: Include infrun.h.
* remote-notif.c: Include infrun.h.
* remote-sim.c: Include infrun.h.
* remote.c: Include infrun.h.
* reverse.c: Include infrun.h.
* rs6000-tdep.c: Include infrun.h.
* s390-linux-tdep.c: Include infrun.h.
* solib-irix.c: Include infrun.h.
* solib-osf.c: Include infrun.h.
* solib-svr4.c: Include infrun.h.
* target.c: Include infrun.h.
* top.c: Include infrun.h.
* windows-nat.c: Include infrun.h.
* mi/mi-interp.c: Include infrun.h.
* mi/mi-main.c: Include infrun.h.
* python/py-threadevent.c: Include infrun.h.
Sometimes it's useful to be able to disable the automatic connection
to the native target. E.g., sometimes GDB disconnects from the
extended-remote target I was debugging, without me noticing it, and
then I do "run". That starts the program locally, and only after a
little head scratch session do I figure out the program is running
locally instead of remotely as intended. Same thing with "attach",
"info os", etc.
With the patch, we now can have this instead:
(gdb) set auto-connect-native-target off
(gdb) target extended-remote :9999
...
*gdb disconnects*
(gdb) run
Don't know how to run. Try "help target".
To still be able to connect to the native target with
auto-connect-native-target set to off, I've made "target native" work
instead of erroring out as today.
Before:
(gdb) target native
Use the "run" command to start a native process.
After:
(gdb) target native
Done. Use the "run" command to start a process.
(gdb) maint print target-stack
The current target stack is:
- native (Native process)
- exec (Local exec file)
- None (None)
(gdb) run
Starting program: ./a.out
...
I've also wanted this for the testsuite, when running against the
native-extended-gdbserver.exp board (runs against gdbserver in
extended-remote mode). With a non-native-target board, it's always a
bug to launch a program with the native target. Turns out we still
have one such case this patch catches:
(gdb) break main
Breakpoint 1 at 0x4009e5: file ../../../src/gdb/testsuite/gdb.base/coremaker.c, line 138.
(gdb) run
Don't know how to run. Try "help target".
(gdb) FAIL: gdb.base/corefile.exp: run: with core
On the patch itself, probably the least obvious bit is the need to go
through all targets, and move the unpush_target call to after the
generic_mourn_inferior call instead of before. This is what
inf-ptrace.c does too, ever since multi-process support was added.
The reason inf-ptrace.c does things in that order is that in the
current multi-process/single-target model, we shouldn't unpush the
target if there are still other live inferiors being debugged. The
check for that is "have_inferiors ()" (a misnomer nowadays...), which
does:
have_inferiors (void)
{
for (inf = inferior_list; inf; inf = inf->next)
if (inf->pid != 0)
return 1;
It's generic_mourn_inferior that ends up clearing inf->pid, so we need
to call it before the have_inferiors check. To make all native
targets behave the same WRT to explicit "target native", I've added an
inf_child_maybe_unpush_target function that targets call instead of
calling unpush_target directly, and as that includes the
have_inferiors check, I needed to adjust the targets.
Tested on x86_64 Fedora 20, native, and also with the
extended-gdbserver board.
Confirmed a cross build of djgpp gdb still builds.
Smoke tested a cross build of Windows gdb under Wine.
Untested otherwise.
gdb/
2014-05-21 Pedro Alves <palves@redhat.com>
* inf-child.c (inf_child_ops, inf_child_explicitly_opened): New
globals.
(inf_child_open_target): New function.
(inf_child_open): Use inf_child_open_target to push the target
instead of erroring out.
(inf_child_disconnect, inf_child_close)
(inf_child_maybe_unpush_target): New functions.
(inf_child_target): Install inf_child_disconnect and
inf_child_close. Store a pointer to the returned object.
* inf-child.h (inf_child_open_target, inf_child_maybe_unpush): New
declarations.
* target.c (auto_connect_native_target): New global.
(show_default_run_target): New function.
(find_default_run_target): Return NULL if automatically connecting
to the native target is disabled.
(_initialize_target): Install set/show auto-connect-native-target.
* NEWS: Mention "set auto-connect-native-target", and "target
native".
* linux-nat.c (super_close): New global.
(linux_nat_close): Call super_close.
(linux_nat_add_target): Store a pointer to the base class's
to_close method.
* inf-ptrace.c (inf_ptrace_mourn_inferior, inf_ptrace_detach): Use
inf_child_maybe_unpush.
* inf-ttrace.c (inf_ttrace_him): Don't push the target if it is
already pushed.
(inf_ttrace_mourn_inferior): Only unpush the target after mourning
the inferior. Use inf_child_maybe_unpush_target.
(inf_ttrace_attach): Don't push the target if it is already
pushed.
(inf_ttrace_detach): Use inf_child_maybe_unpush_target.
* darwin-nat.c (darwin_mourn_inferior): Only unpush the target
after mourning the inferior. Use inf_child_maybe_unpush_target.
(darwin_attach_pid): Don't push the target if it is already
pushed.
* gnu-nat.c (gnu_mourn_inferior): Only unpush the target after
mourning the inferior. Use inf_child_maybe_unpush_target.
(gnu_detach): Use inf_child_maybe_unpush_target.
* go32-nat.c (go32_create_inferior): Don't push the target if it
is already pushed.
(go32_mourn_inferior): Use inf_child_maybe_unpush_target.
* nto-procfs.c (procfs_is_nto_target): Adjust comment.
(procfs_open): Rename to ...
(procfs_open_1): ... this. Add target_ops parameter. Adjust
comments. Can target_preopen before changing node. Call
inf_child_open_target to push the target explicitly.
(procfs_attach): Don't push the target if it is already pushed.
(procfs_detach): Use inf_child_maybe_unpush_target.
(procfs_create_inferior): Don't push the target if it is already
pushed.
(nto_native_ops): New global.
(procfs_open): Reimplement.
(procfs_native_open): New function.
(init_procfs_targets): Install procfs_native_open as to_open of
"target native". Store a pointer to the "native" target in
nto_native_ops.
* procfs.c (procfs_attach): Don't push the target if it is already
pushed.
(procfs_detach): Use inf_child_maybe_unpush_target.
(procfs_mourn_inferior): Only unpush the target after mourning the
inferior. Use inf_child_maybe_unpush_target.
(procfs_init_inferior): Don't push the target if it is already
pushed.
* windows-nat.c (do_initial_windows_stuff): Don't push the target
if it is already pushed.
(windows_detach): Use inf_child_maybe_unpush_target.
(windows_mourn_inferior): Only unpush the target after mourning
the inferior. Use inf_child_maybe_unpush_target.
gdb/doc/
2014-05-21 Pedro Alves <palves@redhat.com>
* gdb.texinfo (Starting): Document "set/show
auto-connect-native-target".
(Target Commands): Document "target native".
gdb/testsuite/
2014-05-21 Pedro Alves <palves@redhat.com>
* boards/gdbserver-base.exp (GDBFLAGS): Set to "set
auto-connect-native-target off".
* gdb.base/auto-connect-native-target.c: New file.
* gdb.base/auto-connect-native-target.exp: New file.
Note that "target procfs" is used by QNX, but the test must be failing
there, as nto-procfs.c overrides to_open with a method that doesn't
throw the error being tested. So I'm just removing the test
completely.
gdb/
2014-03-13 Pedro Alves <palves@redhat.com>
* procfs.c (procfs_target): Don't override to_shortname,
to_longname or to_doc.
gdb/testsuite/
2014-03-13 Pedro Alves <palves@redhat.com>
* gdb.base/default.exp: Don't test "target procfs".
This removes yet another instance of a deprecated_xfer_memory user,
and fixes a nasty regression as a side-effect:
(gdb) start
Temporary breakpoint 1 at 0x19070: file simple_main.adb, line 4.
Starting program: /[...]/simple_main
Warning:
Cannot insert breakpoint 1.
Cannot access memory at address 0x19070
Cannot insert breakpoint -3.
Temporarily disabling shared library breakpoints:
breakpoint #-3
The regression was introduced by the to_xfer_partial transition
to return a status enum. procfs_xfer_partial was updated but
not the case where object is TARGET_OBJECT_MEMORY. As result,
procfs_xfer_partial was returning the length xfered rather than
the status, and the xfered buffer was left uninitialized.
gdb/
2014-02-19 Pedro Alves <palves@redhat.com>
* procfs.c (procfs_target): Don't install procfs_xfer_memory as
deprecated_xfer_memory hook.
(procfs_xfer_partial): Call procfs_xfer_memory instead
of the deprecated_xfer_memory target hook.
(procfs_xfer_memory): Adjust interface as a to_xfer_partial
helper.
This patch does the conversion of to_xfer_partial from
LONGEST (*to_xfer_partial) (struct target_ops *ops,
enum target_object object, const char *annex,
gdb_byte *readbuf, const gdb_byte *writebuf,
ULONGEST offset, ULONGEST len);
to
enum target_xfer_status (*to_xfer_partial) (struct target_ops *ops,
enum target_object object, const char *annex,
gdb_byte *readbuf, const gdb_byte *writebuf,
ULONGEST offset, ULONGEST len, ULONGEST *xfered_len);
It changes to_xfer_partial return the transfer status and the transfered
length by *XFERED_LEN. Generally, the return status has three stats,
- TARGET_XFER_OK,
- TARGET_XFER_EOF,
- TARGET_XFER_E_XXXX,
See the comments to them in 'enum target_xfer_status'. Note that
Pedro suggested not name TARGET_XFER_DONE, as it is confusing,
compared with "TARGET_XFER_OK". We finally name it TARGET_XFER_EOF.
With this change, GDB core can handle unavailable data in a convenient
way.
The rationale behind this change was mentioned here
https://sourceware.org/ml/gdb-patches/2013-10/msg00761.html
Consider an object/value like this:
0 100 150 200 512
DDDDDDDDDDDxxxxxxxxxDDDDDD...DDIIIIIIIIIIII..III
where D is valid data, and xxx is unavailable data, and I is beyond
the end of the object (Invalid). Currently, if we start the
xfer at 0, requesting, say 512 bytes, we'll first get back 100 bytes.
The xfer machinery then retries fetching [100,512), and gets back
TARGET_XFER_E_UNAVAILABLE. That's sufficient when you're either
interested in either having the whole of the 512 bytes available,
or erroring out. But, in this scenario, we're interested in
the data at [150,512). The problem is that the last
TARGET_XFER_E_UNAVAILABLE gives us no indication where to
start the read next. We'd need something like:
get me [0,512) >>>
<<< here's [0,100), *xfered_len is 100, returns TARGET_XFER_OK
get me [100,512) >>> (**1)
<<< [100,150) is unavailable, *xfered_len is 50, return TARGET_XFER_E_UNAVAILABLE.
get me [150,512) >>>
<<< here's [150,200), *xfered_len is 50, return TARGET_XFER_OK.
get me [200,512) >>>
<<< no more data, return TARGET_XFER_EOF.
This naturally implies pushing down the decision of whether
to return TARGET_XFER_E_UNAVAILABLE or something else
down to the target. (Which kinds of leads back to tfile
itself reading from RO memory from file (though we could
export a function in exec.c for that that tfile delegates to,
instead of re-adding the old code).
Beside this change, we also add a macro TARGET_XFER_STATUS_ERROR_P to
check whether a status is an error or not, to stop using "status < 0".
This patch also eliminates the comparison between status and 0.
No target implementations to to_xfer_partial adapts this new
interface. The interface still behaves as before.
gdb:
2014-02-11 Yao Qi <yao@codesourcery.com>
* target.h (enum target_xfer_error): Rename to ...
(enum target_xfer_status): ... it. New. All users updated.
(enum target_xfer_status) <TARGET_XFER_OK>, <TARGET_XFER_EOF>:
New.
(TARGET_XFER_STATUS_ERROR_P): New macro.
(target_xfer_error_to_string): Remove declaration.
(target_xfer_status_to_string): Declare.
(target_xfer_partial_ftype): Adjust it.
(struct target_ops) <to_xfer_partial>: Return
target_xfer_status. Add argument xfered_len. Update
comments.
* target.c (target_xfer_error_to_string): Rename to ...
(target_xfer_status_to_string): ... it. New. All callers
updated.
(target_read_live_memory): Likewise. Call target_xfer_partial
instead of target_read.
(memory_xfer_live_readonly_partial): Return
target_xfer_status. Add argument xfered_len.
(raw_memory_xfer_partial): Likewise.
(memory_xfer_partial_1): Likewise.
(memory_xfer_partial): Likewise.
(target_xfer_partial): Likewise. Check *XFERED_LEN is set
properly. Update debug message.
(default_xfer_partial, current_xfer_partial): Likewise.
(target_write_partial): Likewise.
(target_read_partial): Likewise. All callers updated.
(read_whatever_is_readable): Likewise.
(target_write_with_progress): Likewise.
(target_read_alloc_1): Likewise.
* aix-thread.c (aix_thread_xfer_partial): Likewise.
* auxv.c (procfs_xfer_auxv): Likewise.
(ld_so_xfer_auxv, memory_xfer_auxv): Likewise.
* bfd-target.c (target_bfd_xfer_partial): Likewise.
* bsd-kvm.c (bsd_kvm_xfer_partial): Likewise.
* bsd-uthread.c (bsd_uthread_xfer_partia): Likewise.
* corefile.c (read_memory): Adjust.
* corelow.c (core_xfer_partial): Likewise.
* ctf.c (ctf_xfer_partial): Likewise.
* darwin-nat.c (darwin_read_dyld_info): Likewise. All callers
updated.
(darwin_xfer_partial): Likewise.
* exec.c (section_table_xfer_memory_partial): Likewise. All
callers updated.
(exec_xfer_partial): Likewise.
* exec.h (section_table_xfer_memory_partial): Update
declaration.
* gnu-nat.c (gnu_xfer_memory): Likewise. Assert 'res' is not
negative.
(gnu_xfer_partial): Likewise.
* ia64-hpux-nat.c (ia64_hpux_xfer_memory_no_bs): Likewise.
(ia64_hpux_xfer_memory, ia64_hpux_xfer_uregs): Likewise.
(ia64_hpux_xfer_solib_got): Likewise.
* inf-ptrace.c (inf_ptrace_xfer_partial): Likewise. Change
type of 'partial_len' to ULONGEST.
* inf-ttrace.c (inf_ttrace_xfer_partial): Likewise.
* linux-nat.c (linux_xfer_siginfo ): Likewise.
(linux_nat_xfer_partial): Likewise.
(linux_proc_xfer_partial, linux_xfer_partial): Likewise.
(linux_proc_xfer_spu, linux_nat_xfer_osdata): Likewise.
* monitor.c (monitor_xfer_memory): Likewise.
(monitor_xfer_partial): Likewise.
* procfs.c (procfs_xfer_partial): Likewise.
* record-btrace.c (record_btrace_xfer_partial): Likewise.
* record-full.c (record_full_xfer_partial): Likewise.
(record_full_core_xfer_partial): Likewise.
* remote-sim.c (gdbsim_xfer_memory): Likewise.
(gdbsim_xfer_partial): Likewise.
* remote.c (remote_write_bytes_aux): Likewise. All callers
updated.
(remote_write_bytes, remote_read_bytes): Likewise. All
callers updated.
(remote_flash_erase): Likewise. All callers updated.
(remote_write_qxfer): Likewise. All callers updated.
(remote_read_qxfer): Likewise. All callers updated.
(remote_xfer_partial): Likewise.
* rs6000-nat.c (rs6000_xfer_partial): Likewise.
(rs6000_xfer_shared_libraries): Likewise.
* sol-thread.c (sol_thread_xfer_partial): Likewise.
(sol_thread_xfer_partial): Likewise.
* sparc-nat.c (sparc_xfer_wcookie): Likewise.
(sparc_xfer_partial): Likewise.
* spu-linux-nat.c (spu_proc_xfer_spu): Likewise. All callers
updated.
(spu_xfer_partial): Likewise.
* spu-multiarch.c (spu_xfer_partial): Likewise.
* tracepoint.c (tfile_xfer_partial): Likewise.
* windows-nat.c (windows_xfer_memory): Likewise.
(windows_xfer_shared_libraries): Likewise.
(windows_xfer_partial): Likewise.
* valprint.c: Replace 'target_xfer_error' with
'target_xfer_status' in comments.
On x86-solaris, the gcore command sometimes triggers the following
internal error:
(gdb) gcore
/[...]/procfs.c:5523: internal-error: procfs_make_note_section: Assertion `thread_args.note_data != note_data' failed.
The problem is extremely elusive, for reasons that will become clearer
as I explain what is going on.
The program used to produce this issue was really simple:
| void break_me (void) { }
|
| int
| main (void)
| {
| break_me ();
| return 0;
| }
The procfs_make_note_section builds a buffer incrementally with
the contents of the core's notes section. The interesting bits are:
char *note_data = NULL;
[...]
note_data = (char *) elfcore_write_prpsinfo (obfd,
note_data,
note_size,
fname,
psargs);
This is the first call to bfd's elfcore which initializes note_data.
After that, we have a few more calls, which keep updating notes_data
and note_size, but our interest lies in the following part of
the function:
thread_args.note_data = note_data;
[...]
proc_iterate_over_threads (pi, procfs_corefile_thread_callback,
&thread_args);
/* There should be always at least one thread. */
gdb_assert (thread_args.note_data != note_data);
The comment implies that the assert is to verify that our loop
iterated over at least one thread. The check is relying on the
fact that the notes_data returned by the elfcore module changes
at each iteration, via (in procfs_corefile_thread_callback):
args->note_data = procfs_do_thread_registers (args->obfd, ptid,
args->note_data,
args->note_size,
args->stop_signal);
(which calls elfcore_write_lwpstatus).
But, while it happens most of the time, thanks to a call to realloc
in elfcore_write_note (the function that actually appends the data
at the end of the notes buffer),...
buf = (char *) realloc (buf, *bufsiz + newspace);
... this is by no means guarantied. In fact, under the right
circumstances, the buffer was grown twice without changing
addresses. Unfortunately, the circumstances are very sensitive,
thus making this bug very elusive.
This patch fixes the problem by simply removing the assert.
This means we're losing the assertion that there is at least one
thread, but I think that's OK. If we still want to keep the
assertion, we have the option of either checking the buffer
size, or else adding a boolean flag in the context structure
that we'd set to true as soon as we have a thread.
gdb/ChangeLog:
* procfs.c (procfs_make_note_section): Remove assertion and
associated comment.
This patch adds a typedef target_xfer_partial_ftype. When we change
the signature of xfer_partial functions (for example, adding a new
parameter), we don't have to modify all of their declarations.
This patch also updates the type of parameters of target_xfer_partial
from "void *" to "gdb_byte *".
gdb:
2013-12-18 Yao Qi <yao@codesourcery.com>
* target.h (target_xfer_partial_ftype): New typedef.
(target_xfer_partial): Update declaration.
* auxv.h (memory_xfer_auxv): Likewise.
* ia64-hpux-nat.c (super_xfer_partial): Likewise.
* ia64-linux-nat.c (super_xfer_partial): Likewise.
* linux-nat.c (super_xfer_partial): Likewise.
* procfs.c (procfs_xfer_partial): Likewise.
* record-full.c (record_full_beneath_to_xfer_partial):
(tmp_to_xfer_partial): Likewise.
* sparc-nat.c (inf_ptrace_xfer_partial): Likewise.
* target.c (default_xfer_partial): Likewise.
(current_xfer_partial): Likewise.
(target_xfer_partial): Change parameter type to 'gdb_byte *'.
This patch is purely mechanical. It removes gdb_stat.h and changes
the code to use sys/stat.h.
2013-11-18 Tom Tromey <tromey@redhat.com>
* common/gdb_stat.h: Remove.
* ada-lang.c: Use sys/stat.h, not gdb_stat.h.
* common/filestuff.c: Use sys/stat.h, not gdb_stat.h.
* common/linux-osdata.c: Use sys/stat.h, not gdb_stat.h.
* corefile.c: Use sys/stat.h, not gdb_stat.h.
* ctf.c: Use sys/stat.h, not gdb_stat.h.
* darwin-nat.c: Use sys/stat.h, not gdb_stat.h.
* dbxread.c: Use sys/stat.h, not gdb_stat.h.
* dwarf2read.c: Use sys/stat.h, not gdb_stat.h.
* exec.c: Use sys/stat.h, not gdb_stat.h.
* gdbserver/linux-low.c: Use sys/stat.h, not gdb_stat.h.
* gdbserver/remote-utils.c: Use sys/stat.h, not gdb_stat.h.
* inf-child.c: Use sys/stat.h, not gdb_stat.h.
* jit.c: Use sys/stat.h, not gdb_stat.h.
* linux-nat.c: Use sys/stat.h, not gdb_stat.h.
* m68klinux-nat.c: Use sys/stat.h, not gdb_stat.h.
* main.c: Use sys/stat.h, not gdb_stat.h.
* mdebugread.c: Use sys/stat.h, not gdb_stat.h.
* mi/mi-cmd-env.c: Use sys/stat.h, not gdb_stat.h.
* nto-tdep.c: Use sys/stat.h, not gdb_stat.h.
* objfiles.c: Use sys/stat.h, not gdb_stat.h.
* procfs.c: Use sys/stat.h, not gdb_stat.h.
* remote-fileio.c: Use sys/stat.h, not gdb_stat.h.
* remote-mips.c: Use sys/stat.h, not gdb_stat.h.
* remote.c: Use sys/stat.h, not gdb_stat.h.
* rs6000-nat.c: Use sys/stat.h, not gdb_stat.h.
* sol-thread.c: Use sys/stat.h, not gdb_stat.h.
* solib-spu.c: Use sys/stat.h, not gdb_stat.h.
* source.c: Use sys/stat.h, not gdb_stat.h.
* symfile.c: Use sys/stat.h, not gdb_stat.h.
* symmisc.c: Use sys/stat.h, not gdb_stat.h.
* symtab.c: Use sys/stat.h, not gdb_stat.h.
* top.c: Use sys/stat.h, not gdb_stat.h.
* xcoffread.c: Use sys/stat.h, not gdb_stat.h.
This removes gdb_dirent.h and updates the code to use dirent.h
instead. It also removes the now-useless configure checks.
2013-11-18 Tom Tromey <tromey@redhat.com>
* common/common.m4 (GDB_AC_COMMON): Don't use AC_HEADER_DIRENT.
* common/gdb_dirent.h: Remove.
* common/filestuff.c: Use dirent.h.
* common/linux-osdata.c: Use dirent.h.
(NAMELEN): Define.
* config.in: Rebuild.
* configure: Rebuild.
* configure.ac: Don't use AC_HEADER_DIRENT.
* linux-fork.c: Use dirent.h
* linux-nat.c: Use dirent.h.
* nto-procfs.c: Use dirent.h.
* procfs.c: Use dirent.h.
2013-11-18 Tom Tromey <tromey@redhat.com>
* config.in: Rebuild.
* configure: Rebuild.
* configure.ac: Don't use AC_HEADER_DIRENT.
This removes gdb_string.h. This patch is purely mechanical. I
created it by running the two commands:
git rm common/gdb_string.h
perl -pi -e's/"gdb_string.h"/<string.h>/;' *.[chyl] */*.[chyl]
2013-11-18 Tom Tromey <tromey@redhat.com>
* common/gdb_string.h: Remove.
* aarch64-tdep.c: Use string.h, not gdb_string.h.
* ada-exp.y: Use string.h, not gdb_string.h.
* ada-lang.c: Use string.h, not gdb_string.h.
* ada-lex.l: Use string.h, not gdb_string.h.
* ada-typeprint.c: Use string.h, not gdb_string.h.
* ada-valprint.c: Use string.h, not gdb_string.h.
* aix-thread.c: Use string.h, not gdb_string.h.
* alpha-linux-tdep.c: Use string.h, not gdb_string.h.
* alpha-mdebug-tdep.c: Use string.h, not gdb_string.h.
* alpha-nat.c: Use string.h, not gdb_string.h.
* alpha-osf1-tdep.c: Use string.h, not gdb_string.h.
* alpha-tdep.c: Use string.h, not gdb_string.h.
* alphanbsd-tdep.c: Use string.h, not gdb_string.h.
* amd64-dicos-tdep.c: Use string.h, not gdb_string.h.
* amd64-linux-nat.c: Use string.h, not gdb_string.h.
* amd64-linux-tdep.c: Use string.h, not gdb_string.h.
* amd64-nat.c: Use string.h, not gdb_string.h.
* amd64-sol2-tdep.c: Use string.h, not gdb_string.h.
* amd64fbsd-tdep.c: Use string.h, not gdb_string.h.
* amd64obsd-tdep.c: Use string.h, not gdb_string.h.
* arch-utils.c: Use string.h, not gdb_string.h.
* arm-linux-nat.c: Use string.h, not gdb_string.h.
* arm-linux-tdep.c: Use string.h, not gdb_string.h.
* arm-tdep.c: Use string.h, not gdb_string.h.
* arm-wince-tdep.c: Use string.h, not gdb_string.h.
* armbsd-tdep.c: Use string.h, not gdb_string.h.
* armnbsd-nat.c: Use string.h, not gdb_string.h.
* armnbsd-tdep.c: Use string.h, not gdb_string.h.
* armobsd-tdep.c: Use string.h, not gdb_string.h.
* avr-tdep.c: Use string.h, not gdb_string.h.
* ax-gdb.c: Use string.h, not gdb_string.h.
* ax-general.c: Use string.h, not gdb_string.h.
* bcache.c: Use string.h, not gdb_string.h.
* bfin-tdep.c: Use string.h, not gdb_string.h.
* breakpoint.c: Use string.h, not gdb_string.h.
* build-id.c: Use string.h, not gdb_string.h.
* buildsym.c: Use string.h, not gdb_string.h.
* c-exp.y: Use string.h, not gdb_string.h.
* c-lang.c: Use string.h, not gdb_string.h.
* c-typeprint.c: Use string.h, not gdb_string.h.
* c-valprint.c: Use string.h, not gdb_string.h.
* charset.c: Use string.h, not gdb_string.h.
* cli-out.c: Use string.h, not gdb_string.h.
* cli/cli-cmds.c: Use string.h, not gdb_string.h.
* cli/cli-decode.c: Use string.h, not gdb_string.h.
* cli/cli-dump.c: Use string.h, not gdb_string.h.
* cli/cli-interp.c: Use string.h, not gdb_string.h.
* cli/cli-logging.c: Use string.h, not gdb_string.h.
* cli/cli-script.c: Use string.h, not gdb_string.h.
* cli/cli-setshow.c: Use string.h, not gdb_string.h.
* cli/cli-utils.c: Use string.h, not gdb_string.h.
* coffread.c: Use string.h, not gdb_string.h.
* common/common-utils.c: Use string.h, not gdb_string.h.
* common/filestuff.c: Use string.h, not gdb_string.h.
* common/linux-procfs.c: Use string.h, not gdb_string.h.
* common/linux-ptrace.c: Use string.h, not gdb_string.h.
* common/signals.c: Use string.h, not gdb_string.h.
* common/vec.h: Use string.h, not gdb_string.h.
* core-regset.c: Use string.h, not gdb_string.h.
* corefile.c: Use string.h, not gdb_string.h.
* corelow.c: Use string.h, not gdb_string.h.
* cp-abi.c: Use string.h, not gdb_string.h.
* cp-support.c: Use string.h, not gdb_string.h.
* cp-valprint.c: Use string.h, not gdb_string.h.
* cris-tdep.c: Use string.h, not gdb_string.h.
* d-lang.c: Use string.h, not gdb_string.h.
* dbxread.c: Use string.h, not gdb_string.h.
* dcache.c: Use string.h, not gdb_string.h.
* demangle.c: Use string.h, not gdb_string.h.
* dicos-tdep.c: Use string.h, not gdb_string.h.
* disasm.c: Use string.h, not gdb_string.h.
* doublest.c: Use string.h, not gdb_string.h.
* dsrec.c: Use string.h, not gdb_string.h.
* dummy-frame.c: Use string.h, not gdb_string.h.
* dwarf2-frame.c: Use string.h, not gdb_string.h.
* dwarf2loc.c: Use string.h, not gdb_string.h.
* dwarf2read.c: Use string.h, not gdb_string.h.
* elfread.c: Use string.h, not gdb_string.h.
* environ.c: Use string.h, not gdb_string.h.
* eval.c: Use string.h, not gdb_string.h.
* event-loop.c: Use string.h, not gdb_string.h.
* exceptions.c: Use string.h, not gdb_string.h.
* exec.c: Use string.h, not gdb_string.h.
* expprint.c: Use string.h, not gdb_string.h.
* f-exp.y: Use string.h, not gdb_string.h.
* f-lang.c: Use string.h, not gdb_string.h.
* f-typeprint.c: Use string.h, not gdb_string.h.
* f-valprint.c: Use string.h, not gdb_string.h.
* fbsd-nat.c: Use string.h, not gdb_string.h.
* findcmd.c: Use string.h, not gdb_string.h.
* findvar.c: Use string.h, not gdb_string.h.
* fork-child.c: Use string.h, not gdb_string.h.
* frame.c: Use string.h, not gdb_string.h.
* frv-linux-tdep.c: Use string.h, not gdb_string.h.
* frv-tdep.c: Use string.h, not gdb_string.h.
* gdb.c: Use string.h, not gdb_string.h.
* gdb_bfd.c: Use string.h, not gdb_string.h.
* gdbarch.c: Use string.h, not gdb_string.h.
* gdbtypes.c: Use string.h, not gdb_string.h.
* gnu-nat.c: Use string.h, not gdb_string.h.
* gnu-v2-abi.c: Use string.h, not gdb_string.h.
* gnu-v3-abi.c: Use string.h, not gdb_string.h.
* go-exp.y: Use string.h, not gdb_string.h.
* go-lang.c: Use string.h, not gdb_string.h.
* go32-nat.c: Use string.h, not gdb_string.h.
* hppa-hpux-tdep.c: Use string.h, not gdb_string.h.
* hppa-linux-nat.c: Use string.h, not gdb_string.h.
* hppanbsd-tdep.c: Use string.h, not gdb_string.h.
* hppaobsd-tdep.c: Use string.h, not gdb_string.h.
* i386-cygwin-tdep.c: Use string.h, not gdb_string.h.
* i386-dicos-tdep.c: Use string.h, not gdb_string.h.
* i386-linux-nat.c: Use string.h, not gdb_string.h.
* i386-linux-tdep.c: Use string.h, not gdb_string.h.
* i386-nto-tdep.c: Use string.h, not gdb_string.h.
* i386-sol2-tdep.c: Use string.h, not gdb_string.h.
* i386-tdep.c: Use string.h, not gdb_string.h.
* i386bsd-tdep.c: Use string.h, not gdb_string.h.
* i386gnu-nat.c: Use string.h, not gdb_string.h.
* i386nbsd-tdep.c: Use string.h, not gdb_string.h.
* i386obsd-tdep.c: Use string.h, not gdb_string.h.
* i387-tdep.c: Use string.h, not gdb_string.h.
* ia64-libunwind-tdep.c: Use string.h, not gdb_string.h.
* ia64-linux-nat.c: Use string.h, not gdb_string.h.
* inf-child.c: Use string.h, not gdb_string.h.
* inf-ptrace.c: Use string.h, not gdb_string.h.
* inf-ttrace.c: Use string.h, not gdb_string.h.
* infcall.c: Use string.h, not gdb_string.h.
* infcmd.c: Use string.h, not gdb_string.h.
* inflow.c: Use string.h, not gdb_string.h.
* infrun.c: Use string.h, not gdb_string.h.
* interps.c: Use string.h, not gdb_string.h.
* iq2000-tdep.c: Use string.h, not gdb_string.h.
* irix5-nat.c: Use string.h, not gdb_string.h.
* jv-exp.y: Use string.h, not gdb_string.h.
* jv-lang.c: Use string.h, not gdb_string.h.
* jv-typeprint.c: Use string.h, not gdb_string.h.
* jv-valprint.c: Use string.h, not gdb_string.h.
* language.c: Use string.h, not gdb_string.h.
* linux-fork.c: Use string.h, not gdb_string.h.
* linux-nat.c: Use string.h, not gdb_string.h.
* lm32-tdep.c: Use string.h, not gdb_string.h.
* m2-exp.y: Use string.h, not gdb_string.h.
* m2-typeprint.c: Use string.h, not gdb_string.h.
* m32c-tdep.c: Use string.h, not gdb_string.h.
* m32r-linux-nat.c: Use string.h, not gdb_string.h.
* m32r-linux-tdep.c: Use string.h, not gdb_string.h.
* m32r-rom.c: Use string.h, not gdb_string.h.
* m32r-tdep.c: Use string.h, not gdb_string.h.
* m68hc11-tdep.c: Use string.h, not gdb_string.h.
* m68k-tdep.c: Use string.h, not gdb_string.h.
* m68kbsd-tdep.c: Use string.h, not gdb_string.h.
* m68klinux-nat.c: Use string.h, not gdb_string.h.
* m68klinux-tdep.c: Use string.h, not gdb_string.h.
* m88k-tdep.c: Use string.h, not gdb_string.h.
* macrocmd.c: Use string.h, not gdb_string.h.
* main.c: Use string.h, not gdb_string.h.
* mdebugread.c: Use string.h, not gdb_string.h.
* mem-break.c: Use string.h, not gdb_string.h.
* memattr.c: Use string.h, not gdb_string.h.
* memory-map.c: Use string.h, not gdb_string.h.
* mep-tdep.c: Use string.h, not gdb_string.h.
* mi/mi-cmd-break.c: Use string.h, not gdb_string.h.
* mi/mi-cmd-disas.c: Use string.h, not gdb_string.h.
* mi/mi-cmd-env.c: Use string.h, not gdb_string.h.
* mi/mi-cmd-stack.c: Use string.h, not gdb_string.h.
* mi/mi-cmd-var.c: Use string.h, not gdb_string.h.
* mi/mi-cmds.c: Use string.h, not gdb_string.h.
* mi/mi-console.c: Use string.h, not gdb_string.h.
* mi/mi-getopt.c: Use string.h, not gdb_string.h.
* mi/mi-interp.c: Use string.h, not gdb_string.h.
* mi/mi-main.c: Use string.h, not gdb_string.h.
* mi/mi-parse.c: Use string.h, not gdb_string.h.
* microblaze-rom.c: Use string.h, not gdb_string.h.
* microblaze-tdep.c: Use string.h, not gdb_string.h.
* mingw-hdep.c: Use string.h, not gdb_string.h.
* minidebug.c: Use string.h, not gdb_string.h.
* minsyms.c: Use string.h, not gdb_string.h.
* mips-irix-tdep.c: Use string.h, not gdb_string.h.
* mips-linux-tdep.c: Use string.h, not gdb_string.h.
* mips-tdep.c: Use string.h, not gdb_string.h.
* mips64obsd-tdep.c: Use string.h, not gdb_string.h.
* mipsnbsd-tdep.c: Use string.h, not gdb_string.h.
* mipsread.c: Use string.h, not gdb_string.h.
* mn10300-linux-tdep.c: Use string.h, not gdb_string.h.
* mn10300-tdep.c: Use string.h, not gdb_string.h.
* monitor.c: Use string.h, not gdb_string.h.
* moxie-tdep.c: Use string.h, not gdb_string.h.
* mt-tdep.c: Use string.h, not gdb_string.h.
* nbsd-tdep.c: Use string.h, not gdb_string.h.
* nios2-linux-tdep.c: Use string.h, not gdb_string.h.
* nto-procfs.c: Use string.h, not gdb_string.h.
* nto-tdep.c: Use string.h, not gdb_string.h.
* objc-lang.c: Use string.h, not gdb_string.h.
* objfiles.c: Use string.h, not gdb_string.h.
* opencl-lang.c: Use string.h, not gdb_string.h.
* osabi.c: Use string.h, not gdb_string.h.
* osdata.c: Use string.h, not gdb_string.h.
* p-exp.y: Use string.h, not gdb_string.h.
* p-lang.c: Use string.h, not gdb_string.h.
* p-typeprint.c: Use string.h, not gdb_string.h.
* parse.c: Use string.h, not gdb_string.h.
* posix-hdep.c: Use string.h, not gdb_string.h.
* ppc-linux-nat.c: Use string.h, not gdb_string.h.
* ppc-sysv-tdep.c: Use string.h, not gdb_string.h.
* ppcfbsd-tdep.c: Use string.h, not gdb_string.h.
* ppcnbsd-tdep.c: Use string.h, not gdb_string.h.
* ppcobsd-tdep.c: Use string.h, not gdb_string.h.
* printcmd.c: Use string.h, not gdb_string.h.
* procfs.c: Use string.h, not gdb_string.h.
* prologue-value.c: Use string.h, not gdb_string.h.
* python/py-auto-load.c: Use string.h, not gdb_string.h.
* python/py-gdb-readline.c: Use string.h, not gdb_string.h.
* ravenscar-thread.c: Use string.h, not gdb_string.h.
* regcache.c: Use string.h, not gdb_string.h.
* registry.c: Use string.h, not gdb_string.h.
* remote-fileio.c: Use string.h, not gdb_string.h.
* remote-m32r-sdi.c: Use string.h, not gdb_string.h.
* remote-mips.c: Use string.h, not gdb_string.h.
* remote-sim.c: Use string.h, not gdb_string.h.
* remote.c: Use string.h, not gdb_string.h.
* reverse.c: Use string.h, not gdb_string.h.
* rs6000-aix-tdep.c: Use string.h, not gdb_string.h.
* ser-base.c: Use string.h, not gdb_string.h.
* ser-go32.c: Use string.h, not gdb_string.h.
* ser-mingw.c: Use string.h, not gdb_string.h.
* ser-pipe.c: Use string.h, not gdb_string.h.
* ser-tcp.c: Use string.h, not gdb_string.h.
* ser-unix.c: Use string.h, not gdb_string.h.
* serial.c: Use string.h, not gdb_string.h.
* sh-tdep.c: Use string.h, not gdb_string.h.
* sh64-tdep.c: Use string.h, not gdb_string.h.
* shnbsd-tdep.c: Use string.h, not gdb_string.h.
* skip.c: Use string.h, not gdb_string.h.
* sol-thread.c: Use string.h, not gdb_string.h.
* solib-dsbt.c: Use string.h, not gdb_string.h.
* solib-frv.c: Use string.h, not gdb_string.h.
* solib-osf.c: Use string.h, not gdb_string.h.
* solib-spu.c: Use string.h, not gdb_string.h.
* solib-target.c: Use string.h, not gdb_string.h.
* solib.c: Use string.h, not gdb_string.h.
* somread.c: Use string.h, not gdb_string.h.
* source.c: Use string.h, not gdb_string.h.
* sparc-nat.c: Use string.h, not gdb_string.h.
* sparc-sol2-tdep.c: Use string.h, not gdb_string.h.
* sparc-tdep.c: Use string.h, not gdb_string.h.
* sparc64-tdep.c: Use string.h, not gdb_string.h.
* sparc64fbsd-tdep.c: Use string.h, not gdb_string.h.
* sparc64nbsd-tdep.c: Use string.h, not gdb_string.h.
* sparcnbsd-tdep.c: Use string.h, not gdb_string.h.
* spu-linux-nat.c: Use string.h, not gdb_string.h.
* spu-multiarch.c: Use string.h, not gdb_string.h.
* spu-tdep.c: Use string.h, not gdb_string.h.
* stabsread.c: Use string.h, not gdb_string.h.
* stack.c: Use string.h, not gdb_string.h.
* std-regs.c: Use string.h, not gdb_string.h.
* symfile.c: Use string.h, not gdb_string.h.
* symmisc.c: Use string.h, not gdb_string.h.
* symtab.c: Use string.h, not gdb_string.h.
* target.c: Use string.h, not gdb_string.h.
* thread.c: Use string.h, not gdb_string.h.
* tilegx-linux-nat.c: Use string.h, not gdb_string.h.
* tilegx-tdep.c: Use string.h, not gdb_string.h.
* top.c: Use string.h, not gdb_string.h.
* tracepoint.c: Use string.h, not gdb_string.h.
* tui/tui-command.c: Use string.h, not gdb_string.h.
* tui/tui-data.c: Use string.h, not gdb_string.h.
* tui/tui-disasm.c: Use string.h, not gdb_string.h.
* tui/tui-file.c: Use string.h, not gdb_string.h.
* tui/tui-layout.c: Use string.h, not gdb_string.h.
* tui/tui-out.c: Use string.h, not gdb_string.h.
* tui/tui-regs.c: Use string.h, not gdb_string.h.
* tui/tui-source.c: Use string.h, not gdb_string.h.
* tui/tui-stack.c: Use string.h, not gdb_string.h.
* tui/tui-win.c: Use string.h, not gdb_string.h.
* tui/tui-windata.c: Use string.h, not gdb_string.h.
* tui/tui-winsource.c: Use string.h, not gdb_string.h.
* typeprint.c: Use string.h, not gdb_string.h.
* ui-file.c: Use string.h, not gdb_string.h.
* ui-out.c: Use string.h, not gdb_string.h.
* user-regs.c: Use string.h, not gdb_string.h.
* utils.c: Use string.h, not gdb_string.h.
* v850-tdep.c: Use string.h, not gdb_string.h.
* valarith.c: Use string.h, not gdb_string.h.
* valops.c: Use string.h, not gdb_string.h.
* valprint.c: Use string.h, not gdb_string.h.
* value.c: Use string.h, not gdb_string.h.
* varobj.c: Use string.h, not gdb_string.h.
* vax-tdep.c: Use string.h, not gdb_string.h.
* vaxnbsd-tdep.c: Use string.h, not gdb_string.h.
* vaxobsd-tdep.c: Use string.h, not gdb_string.h.
* windows-nat.c: Use string.h, not gdb_string.h.
* xcoffread.c: Use string.h, not gdb_string.h.
* xml-support.c: Use string.h, not gdb_string.h.
* xstormy16-tdep.c: Use string.h, not gdb_string.h.
* xtensa-linux-nat.c: Use string.h, not gdb_string.h.
This patch constifies the target_ops method to_detach.
This is a small cleanup, but also, I think, a bug-prevention fix,
since gdb already acts as if the "args" argument here was const.
In particular, top.c:quit_force calls kill_or_detach via
iterate_over_inferiors. kill_or_detach calls target_detach, passing
the same argument each time. So, if one of these methods was not
const-correct, then kill_or_detach would change its behavior in a
strange way.
I could not build every target I modified in this patch. I've
inspected them all by hand, though. Many targets do not use the
"args" parameter; a couple pass it to atoi; and a few pass it on to
the to_detach method of the target beneath. The only code that
required a real change was in linux-nat.c, and that only needed the
introduction of a temporary variable for const-correctness.
2013-11-08 Tom Tromey <tromey@redhat.com>
* aix-thread.c (aix_thread_detach): Update.
* corelow.c (core_detach): Update.
* darwin-nat.c (darwin_detach): Update.
* dec-thread.c (dec_thread_detach): Update.
* gnu-nat.c (gnu_detach): Update.
* go32-nat.c (go32_detach): Update.
* inf-ptrace.c (inf_ptrace_detach): Update.
* inf-ttrace.c (inf_ttrace_detach): Update.
* linux-fork.c (linux_fork_detach): Update.
* linux-fork.h (linux_fork_detach): Update.
* linux-nat.c (linux_nat_detach): Update. Introduce "tem"
local for const-correctness.
* linux-thread-db.c (thread_db_detach): Update.
* monitor.c (monitor_detach): Update.
* nto-procfs.c (procfs_detach): Update.
* procfs.c (procfs_detach): Update.
* record.c (record_detach): Update.
* record.h (record_detach): Update.
* remote-m32r-sdi.c (m32r_detach): Update.
* remote-mips.c (mips_detach): Update.
* remote-sim.c (gdbsim_detach): Update.
* remote.c (remote_detach_1, remote_detach)
(extended_remote_detach): Update.
* sol-thread.c (sol_thread_detach): Update.
* target.c (target_detach): Make "args" const.
(init_dummy_target): Update.
* target.h (struct target_ops) <to_detach>: Make argument const.
(target_detach): Likewise.
* windows-nat.c (windows_detach): Update.
Occasionaly we hear about people having problems with GDB not being
able to start programs (with "run"/"start"). GDB spawns a shell to
start the program, and most often, it'll be the case that the problem
is actually with the user's shell setup.
GDB has code to disable the use of the shell to start programs.
That's the STARTUP_WITH_SHELL macro that native targets could set to 0
in their nm.h file (though no target actually uses it nowadays).
This patch makes that setting a run-time knob instead. This will be
useful to quickly diagnose such shell issues, and might also come in
handy at other times (such as when debugging the shell itself, if you
don't have a different shell handy).
gdb/
2013-10-24 Pedro Alves <palves@redhat.com>
* NEWS (New options): Mention set/show startup-with-shell.
* config/alpha/nm-osf3.h (START_INFERIOR_TRAPS_EXPECTED): Set to 2
instead of 3.
* fork-child.c (fork_inferior, startup_inferior): Handle 'set
startup-with-shell'.
(show_startup_with_shell): New function.
(_initialize_fork_child): Register the set/show startup-with-shell
commands.
* inf-ptrace.c (inf_ptrace_create_inferior): Remove comment.
* inf-ttrace.c (inf_ttrace_him): Remove comment.
* procfs.c (procfs_init_inferior): Remove comment.
* infcmd.c (startup_with_shell): New global.
* inferior.h (startup_with_shell): Declare global.
(STARTUP_WITH_SHELL): Delete.
(START_INFERIOR_TRAPS_EXPECTED): Set to 1 by default instead of 2.
gdb/doc/
2013-10-24 Pedro Alves <palves@redhat.com>
* gdb.texinfo (Starting): Document set/show startup-with-shell.
Two modifications:
1. The addition of 2013 to the copyright year range for every file;
2. The use of a single year range, instead of potentially multiple
year ranges, as approved by the FSF.
This function is used as a target_ops callback. The function
implemention was recently changed, but the declaration wasn't
updated accordingly.
This fixes a build failure on Solaris.
gdb/ChangeLog:
* procfs.c (proc_find_memory_regions): Fix declaration.
Joel Brobecker