* configure.in: Change linux to default to elf. Using
i[345]86-*-linuxaout will build a linker which defaults to a.out.
* config/i386-laout.mt: Rename from old config/i386-linux.mt.
* config/i386-linux.mt: Rename from old config/i386-lelf.mt.
* config/i386-lelf.mt: Remove.
* config.bfd: Change linux to default to elf. Using
i[345]86-*-linuxaout will build a library which defaults to a.out.
* config/i386-laout.mt: Rename from old config/i386-linux.mt.
* config/i386-linux.mt: Rename from old config/i386-lelf.mt.
Comment out EXTRALIBS.
* config/i386-lelf.mt: Remove.
* Makefile.in (gdbtk.o): Use X11_CFLAGS to provide alternate
locations (per-host) for X11 include files.
* config/pa/hppahpux.mh (XM_CLIBS): Add -L/usr/lib/X11R5 to force
the use of R5 libs. (X11_CFLAGS): Add this to indicate the locs
of the R5 include files.
end-sanitize-gdbtk
* monitor.c monitor.h remote-est.c rom68k-rom.c: Add start of
support for interrupting target.
* monitor.c (monitor_open): Send stop command before doing
anything else.
* (monitor_load_srec): Fix record size calculation to prevent end
of segment from getting trashed.
* rom68k-rom.c: Update to latest version of struct monitor_ops.
* config/sparc/tm-sparc.h (FIX_CALL_DUMMY): Fix byte-order
problems. Makes DOS hosted function calling work.
* sparclite/crt0.s: Define _start to make COFF happy.
* testsuite/config/rom68k.exp (gdb_target_rom68k): Use
$targetname, $serialport and $baud instead of hardwired variables.
* testsuite/gdb.base/{sigall.exp signals.exp}: Skip these if the
target doesn't support signals.
set, set TYPE_FLAG_TARGET_STUB.
(check_stub_type): Recalculate TYPE_LENGTH for range type.
* stabsread.c (read_range_type): If index type number is followed
by '=', back up, call read_type. and assume we have a true range.
* gdbtypes.h (TYPE_FLAG_TARGET_STUB): Update comment.
This fixes PR 6632.
build-all.mk,config/mh-solaris: revert these two changes:
Tue Mar 30 10:03:09 1993 Ian Lance Taylor (ian@cygnus.com)
* build-all.mk: Use CC=cc -Xs on Solaris.
Mon Mar 29 19:59:26 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
* config/mh-solaris: SunPRO C needs -Xs to be able to get a
working xmakefile for Emacs.
xmakefile no longer used for emacs; recent versions of SunPRO C
allegedly drop -Xs; running configure will assume ``cc'' but when you
compile, it uses ``cc -Xs'' (ansi vs old SunOS behavior) which causes
all kinds of problems rebuilding the source using the SunPRO compiler.
symbols which the main linker code did not do anything with.
(_bfd_generic_link_output_symbols): Use udata.p if it is set,
rather than looking the symbol up in the hash table. Just pass
through constructor symbols for which udata.p is not set. If the
linker defined the symbol, clear the constructor flag.
Fix -r for b.out file format when constructor symbols are defined.
sparc-tdep.c (supply_gregset, supply_fpregset): Fill inaccessible
registers with zero to handle recent read_register_bytes change.
* irix4-nat.c, irix5-nat.c, mipsv4-nat.c (supply_gregset,
fill_gregset): Fix handling of CAUSE_REGNUM.
* mips-nat.c (store_inferior_registers): Handle unwritable
registers when storing a single register.
* config/mips/tm-irix3.h (CAUSE_REGNUM, BADVADDR_REGNUM):
Fix definitions.
* mdebugread.c (parse_symbol, psymtab_to_symtab_1): Clear
allocated mips_extra_func_info, if the debug info is corrupt,
the PDR to fill it in might be missing.
reason for skipping the warning was that configure.in sometimes
intentionally skipped building the executables but the tcl code
had no way of knowing. That (a) was always bogus with respect to
error handling, (b) is no longer true (right now there is no way
to skip C++ tests).
* gdb.c++/demangle.exp: Remove unused binfile and srcfile variables.
(sunpro_static_transform_name): Renamed from
solaris_static_transform_name.
* config/sparc/tm-sun4os4.h (STATIC_TRANSFORM_NAME):
Define to sunpro_static_transform_name for acc 3.0 compiled
executables.
with the real source file name.
* dbxread.c (end_psymtab): Handle static functions in the
SOFUN_ADDRESS_MAYBE_MISSING case by passing pst->filename
to lookup_minimal_symbol.
(process_one_symbol): Ignore extra outermost context from
SunPRO cc and acc.
* stabsread.c (define_symbol): Do not complain for SunPRO
static variable encoding if STATIC_TRANSFORM_NAME is defined.
* sparc-tdep.c, config/sparc/tm-sun4sol2.h
(sunpro_static_transform_name): Renamed from
solaris_static_transform_name.
* config/sparc/tm-sun4os4.h (STATIC_TRANSFORM_NAME):
Define to sunpro_static_transform_name for acc 3.0 compiled
executables.
* procfs.c, config/alpha/nm-osf2.h (PROCFS_DONT_TRACE_FAULTS):
Renamed from PROCFS_DONT_TRACE_IFAULT, don't trace any faults
if defined.
* procfs.c (info_proc_siginfo): Cast sip->si_addr to
`unsigned long' and use `lx' format for printing it.
number (we are already testing that the correct source line text
gets printed).
* gdb.base/break.exp: Make one test if $usestubs. I'm not sure
that is what is intended, but something needed to be done to get
sunos4 native working again.
* gdb.c++/misc.cc (main): Fix typo (#iffef -> #ifdef).
* findvar.c: Move default def of CANNOT_STORE_REGISTER closer to
the beginning of the code.
* (write_register_gen): New routine. Analogous to
read_register_gen.
* (write_register_bytes): Another rewrite! Make it smarter about
not updating regs with the same value.
* monitor.c (printf_monitor readchar): Use stderr instead of
stdout to output debug info. Also cleanup readchar a little.
* (expect): Make sure that excessive responses are null
terminated.
* (monitor_open): Check for magic number in monitor_ops struct.
Allow multiple commands as init strings. Also, clear all
breakpoints.
* (monitor_resume monitor_wait): Send a command to dump all the
regs for those targets which don't do so when waking up after a
continue command.
* (monitor_wait): Handle excessive response output better.
* (monitor_write_memory): Use block fill, word, and long word
commands (if they exist) to write memory more efficiently.
* General cleanups to use flag bits instead of individual flag
words in monitor_ops struct.
* (monitor_command): Return output from command.
* (monitor_load_srec): Allocate buffer only once. Use alloca.
Wait for load response string instead of using a timeout to start
sending S-records. Fix bug where value of srec_frame shrinks. If
hashmark is set, print `-' for retransmissions. General cleanups.
* (monitor_make_srec): Get rid of S-record default type kludge.
* monitor.h: Use seperate struct for memory and register
read/write commands. Memory commands can come in byte, word,
long, and longlong forms.
* (monitor_ops): Change lots of fields. Generalize some stuff.
Put all flags into flags word. Allow init to be a list of commands.
Add command for clearing all breakpoints, block fill, dumping all
registers.
* remote-est.c: Rewrite to use new monitor conventions.
* config/m68k/est.mt (TDEPFILES): Add monitor.o.
* config/m68k/tm-est.h: Set NUM_REGS to 18.
* testsuite/gdb.base/break.exp: Lots of cleanups. Use gdb_test
more thoroughly.
* findvar.c: Move default def of CANNOT_STORE_REGISTER closer to
the beginning of the code.
* (write_register_gen): New routine. Analogous to
read_register_gen.
* (write_register_bytes): Another rewrite! Make it smarter about
not updating regs with the same value.
* monitor.c (printf_monitor readchar): Use stderr instead of
stdout to output debug info. Also cleanup readchar a little.
* (expect): Make sure that excessive responses are null
terminated.
* (monitor_open): Check for magic number in monitor_ops struct.
Allow multiple commands as init strings. Also, clear all
breakpoints.
* (monitor_resume monitor_wait): Send a command to dump all the
regs for those targets which don't do so when waking up after a
continue command.
* (monitor_wait): Handle excessive response output better.
* (monitor_write_memory): Use block fill, word, and long word
commands (if they exist) to write memory more efficiently.
* General cleanups to use flag bits instead of individual flag
words in monitor_ops struct.
* (monitor_command): Return output from command.
* (monitor_load_srec): Allocate buffer only once. Use alloca.
Wait for load response string instead of using a timeout to start
sending S-records. Fix bug where value of srec_frame shrinks. If
hashmark is set, print `-' for retransmissions. General cleanups.
* (monitor_make_srec): Get rid of S-record default type kludge.
* monitor.h: Use seperate struct for memory and register
read/write commands. Memory commands can come in byte, word,
long, and longlong forms.
* (monitor_ops): Change lots of fields. Generalize some stuff.
Put all flags into flags word. Allow init to be a list of commands.
Add command for clearing all breakpoints, block fill, dumping all
registers.
* remote-est.c: Rewrite to use new monitor conventions.
* config/m68k/est.mt (TDEPFILES): Add monitor.o.
* config/m68k/tm-est.h: Set NUM_REGS to 18.
* testsuite/gdb.base/break.exp: Lots of cleanups. Use gdb_test
more thoroughly.
Jason Molenda
Jim Kingdon
Kung Hsu
Ian Lance Taylor
Stu Grossman
Stan Shebs
Torbjorn Granlund
Michael Meissner
Peter Schauer
Per Bothner
J.T. Conklin
Jeff Law
Ken Raeburn