Don't convert PC-relative REL relocations against absolute symbols to
section-relative references and retain the original symbol reference
instead. Offsets into the absolute section may overflow the limited
range of their in-place addend field, causing an assembly error, e.g.:
$ cat test.s
.text
.globl foo
.ent foo
foo:
b bar
.end foo
.set bar, 0x12345678
$ as -EB -32 -o test.o test.s
test.s: Assembler messages:
test.s:3: Error: relocation overflow
$
With the original reference retained the source can now be assembled and
linked successfully:
$ as -EB -32 -o test.o test.s
$ objdump -dr test.o
test.o: file format elf32-tradbigmips
Disassembly of section .text:
00000000 <foo>:
0: 1000ffff b 0 <foo>
0: R_MIPS_PC16 bar
4: 00000000 nop
...
$ ld -melf32btsmip -Ttext 0x12340000 -e foo -o test test.o
$ objdump -dr test
test: file format elf32-tradbigmips
Disassembly of section .text:
12340000 <foo>:
12340000: 1000159d b 12345678 <bar>
12340004: 00000000 nop
...
$
For simplicity always retain the original symbol reference, even if it
would indeed fit.
Making TC_FORCE_RELOCATION_ABS separate from TC_FORCE_RELOCATION causes
R_MICROMIPS_PC7_S1, R_MICROMIPS_PC10_S1 and R_MICROMIPS_PC16_S1 branch
relocations against absolute symbols to be converted on RELA targets to
section-relative references. This is an intended effect of this change.
Absolute symbols carry no ISA annotation in their `st_other' field and
their value is not going to change with linker relaxation, so it is safe
to discard the original reference and keep the calculated final symbol
value only in the relocation's addend.
Similarly R6 R_MIPS_PCHI16 and R_MIPS_PCLO16 relocations referring
absolute symbols can be safely converted even on REL targets, as there
the in-place addend of these relocations covers the entire 32-bit
address space so it can hold the calculated final symbol value, and
likewise the value referred won't be affected by any linker relaxation.
Add a set of suitable test cases and enable REL linker tests which now
work and were previously used as dump patterns for RELA tests only.
gas/
* config/tc-mips.h (TC_FORCE_RELOCATION_ABS): New macro.
(mips_force_relocation_abs): New prototype.
* config/tc-mips.c (mips_force_relocation_abs): New function.
* testsuite/gas/mips/branch-absolute.d: Adjust dump patterns.
* testsuite/gas/mips/mips16-branch-absolute.d: Likewise.
* testsuite/gas/mips/micromips-branch-absolute-n32.d: Likewise.
* testsuite/gas/mips/micromips-branch-absolute-n64.d: Likewise.
* testsuite/gas/mips/micromips-branch-absolute-addend-n32.d:
Likewise.
* testsuite/gas/mips/micromips-branch-absolute-addend-n64.d:
Likewise.
* testsuite/gas/mips/branch-absolute-addend.d: New test.
* testsuite/gas/mips/mips16-branch-absolute-addend.d: New test.
* testsuite/gas/mips/micromips-branch-absolute-addend.d: New
test.
* testsuite/gas/mips/mips.exp: Run the new tests.
ld/
* testsuite/ld-mips-elf/mips-elf.exp: Run
`branch-absolute-addend', `mips16-branch-absolute',
`mips16-branch-absolute-addend' and
`micromips-branch-absolute-addend'.
This file contains invisible Unicode characters that are indistinguishable to humans but may be processed differently by a computer. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.
README for GAS
A number of things have changed since version 1 and the wonderful
world of gas looks very different. There's still a lot of irrelevant
garbage lying around that will be cleaned up in time. Documentation
is scarce, as are logs of the changes made since the last gas release.
My apologies, and I'll try to get something useful.
Unpacking and Installation - Summary
====================================
See ../binutils/README.
To build just the assembler, make the target all-gas.
Documentation
=============
The GAS release includes texinfo source for its manual, which can be processed
into `info' or `dvi' forms.
The DVI form is suitable for printing or displaying; the commands for doing
this vary from system to system. On many systems, `lpr -d' will print a DVI
file. On others, you may need to run a program such as `dvips' to convert the
DVI file into a form your system can print.
If you wish to build the DVI file, you will need to have TeX installed on your
system. You can rebuild it by typing:
cd gas/doc
make as.dvi
The Info form is viewable with the GNU Emacs `info' subsystem, or the
stand-alone `info' program, available as part of the GNU Texinfo distribution.
To build the info files, you will need the `makeinfo' program. Type:
cd gas/doc
make info
Specifying names for hosts and targets
======================================
The specifications used for hosts and targets in the `configure'
script are based on a three-part naming scheme, but some short
predefined aliases are also supported. The full naming scheme encodes
three pieces of information in the following pattern:
ARCHITECTURE-VENDOR-OS
For example, you can use the alias `sun4' as a HOST argument or in a
`--target=TARGET' option. The equivalent full name is
`sparc-sun-sunos4'.
The `configure' script accompanying GAS does not provide any query
facility to list all supported host and target names or aliases.
`configure' calls the Bourne shell script `config.sub' to map
abbreviations to full names; you can read the script, if you wish, or
you can use it to test your guesses on abbreviations--for example:
% sh config.sub i386v
i386-unknown-sysv
% sh config.sub i786v
Invalid configuration `i786v': machine `i786v' not recognized
`configure' options
===================
Here is a summary of the `configure' options and arguments that are
most often useful for building GAS. `configure' also has several other
options not listed here.
configure [--help]
[--prefix=DIR]
[--srcdir=PATH]
[--host=HOST]
[--target=TARGET]
[--with-OPTION]
[--enable-OPTION]
You may introduce options with a single `-' rather than `--' if you
prefer; but you may abbreviate option names if you use `--'.
`--help'
Print a summary of the options to `configure', and exit.
`-prefix=DIR'
Configure the source to install programs and files under directory
`DIR'.
`--srcdir=PATH'
Look for the package's source code in directory DIR. Usually
`configure' can determine that directory automatically.
`--host=HOST'
Configure GAS to run on the specified HOST. Normally the
configure script can figure this out automatically.
There is no convenient way to generate a list of all available
hosts.
`--target=TARGET'
Configure GAS for cross-assembling programs for the specified
TARGET. Without this option, GAS is configured to assemble .o files
that run on the same machine (HOST) as GAS itself.
There is no convenient way to generate a list of all available
targets.
`--enable-OPTION'
These flags tell the program or library being configured to
configure itself differently from the default for the specified
host/target combination. See below for a list of `--enable'
options recognized in the gas distribution.
`configure' accepts other options, for compatibility with configuring
other GNU tools recursively; but these are the only options that affect
GAS or its supporting libraries.
The `--enable' options recognized by software in the gas distribution are:
`--enable-targets=...'
This causes one or more specified configurations to be added to those for
which BFD support is compiled. Currently gas cannot use any format other
than its compiled-in default, so this option is not very useful.
`--enable-bfd-assembler'
This causes the assembler to use the new code being merged into it to use
BFD data structures internally, and use BFD for writing object files.
For most targets, this isn't supported yet. For most targets where it has
been done, it's already the default. So generally you won't need to use
this option.
Compiler Support Hacks
======================
On a few targets, the assembler has been modified to support a feature
that is potentially useful when assembling compiler output, but which
may confuse assembly language programmers. If assembler encounters a
.word pseudo-op of the form symbol1-symbol2 (the difference of two
symbols), and the difference of those two symbols will not fit in 16
bits, the assembler will create a branch around a long jump to
symbol1, and insert this into the output directly before the next
label: The .word will (instead of containing garbage, or giving an
error message) contain (the address of the long jump)-symbol2. This
allows the assembler to assemble jump tables that jump to locations
very far away into code that works properly. If the next label is
more than 32K away from the .word, you lose (silently); RMS claims
this will never happen. If the -K option is given, you will get a
warning message when this happens.
REPORTING BUGS IN GAS
=====================
Bugs in gas should be reported to:
bug-binutils@gnu.org.
They may be cross-posted to gcc-bugs@gnu.org if they affect the use of
gas with gcc. They should not be reported just to gcc-bugs, since not
all of the maintainers read that list.
See ../binutils/README for what we need in a bug report.
Copyright (C) 2012-2016 Free Software Foundation, Inc.
Copying and distribution of this file, with or without modification,
are permitted in any medium without royalty provided the copyright
notice and this notice are preserved.
b416ba9b50